rl9604s20004a acura 1998
TRANSCRIPT
5/14/2018 RL9604S20004A acura 1998 - slidepdf.com
http://slidepdf.com/reader/full/rl9604s20004a-acura-1998 1/2
Doors
Door Panel Removal
NOTE: Take care not to scratch the door panel and other
parts.
1. Remove the trim plate, then remove the screws.
NOTE: Do not remove the inner handle from the
door panel.
Screw locations, 2
Pry here.
INNER
HANDLE
TRIM
PLATE
2. Remove the screw and stop. Release the clips that
hold the door panel, then remove the door panel by
pulling it upward.
NOTE: Remove the door panel with as little bending
as possible to avoid creasing or breaking it.
TRIM PADREMOVER
(Commercially
available)
Snap-on#A177, or
equivalent
12 mm(0.47 in.)
1 mm
(0.04 in.)
45 mm(1.77 in.)
Clip locations
DOOR
PANEL
TRIM PADREMOVER
DOOR PANEL
STOP
3. Disconnect the connectors and inner handle cable.
SECURITY
INDICATOR
CONNECTOR(driver's)
POWER SEATMEMORY SWITCH
CONNECTOR
(driver's)
COURTESYLIGHT
CONNECTOR
TWEETER
CONNECTOR
(for some models)
POWER WINDOW
SWITCH CONNECTOR
TRUNK LIDOPENER SWITCH
CONNECTOR
4. Installation is the reverse of the removal procedure.
INNER HANDLE
CABLE
POWER DOOR
LOCK SWITCH
CONNECTOR
TWEETER
CONNECTOR(for some models)
POWER MIRROR
SWITCH
CONNECTORS
Screw location, 1
95 mm (3.74 in.)
45°
Main Menu Table of Contents