rn wyse thinos 7-1-122 gr

Release NotesWyse ThinOSTM Release 7.1 Build 122 (Also Includes Builds 111 and 033)

Issue: 042012 Rev. A General Release

Copyright Notices© 2012, Wyse Technology Inc. All rights reserved.

This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication without express written permission.

About this GuideThis guide is intended for administrators. This document is updated periodically as more information becomes available.

Finding the Information You Need in this GuideYou can use either the Search window or Find toolbar to locate a word, series of words, or partial word in an active PDF document. For detailed information on using these features, refer to the Help in your PDF reader.

Wyse Technical SupportTo access Wyse technical resources, visit http://www.wyse.com/support. If you still have questions, you can submit your questions using the Wyse Self-Service Center at http://support.wyse.com/selfservice.html or call Customer Support at 1-800-800-WYSE (toll free in U.S. and Canada). Hours of operation are from 6:00 A.M. to 5:00 P.M. Pacific Time, Monday through Friday.

To access international support, visit http://www.wyse.com/global.

Wyse Online CommunityWyse maintains an online community where users of our products can seek and exchange information on user forums. Visit the Wyse Online Community forums at: http://community.wyse.com/forum.

http://community.wyse.com/forum

http://www.wyse.com/support

http://www.wyse.com/global

http://support.wyse.com/selfservice.html

Contents

Copyright Notices iiAbout this Guide ii

Finding the Information You Need in this Guide iiWyse Technical Support ii

Wyse Online Community ii

1 Release 7.1 Build 122 1New Features 1Fixes 10Build Details 14

C10LE 14R10L 14S10 14T10 15V10LE 15

Platform Support 16Software Compatibility 16Supported Codecs 16Tested Peripherals 17

Smart Card Support 20

2 Release 7.1 Build 111 (T10 Product Release) 21New Features 21Known Issues 22Build Details 23Platform Support 24

Software Compatibility 24Supported Codecs 24Tested Peripherals 25

Wyse TCX Multimedia (MMR) Test Results 26Smart Card Support 26Resolution Support 27

3 Release 7.1 Build 033 29Fixes 29New Features 30Known Issues 44

Additional Notes and Reminders 44Software Information 46

Build Details 46C10LE 46R10L 48S10 50V10LE 52

iv Contents

BIOS Details 54C10LE 54R10L 54S10 54V10LE 55

Supported Platforms 56Software Compatibility 56Supported Codecs 56Tested Peripherals 57

Supported Resolutions 59

Tables 61

1 Release 7.1 Build 122

This section contains:• "New Features"• "Fixes"• "Build Details"• "Platform Support"• "Smart Card Support"

New Features

• WDM Discovery Settings

· DNS Name Record - (Dynamic Discovery) Allows devices to use the DNS Hostname lookup method to discover a WDM Server.

· DNS SRV Record - (Dynamic Discovery) Allows devices to use the DNS SRV record lookup method to discover a WDM Server.

· DHCP Option Tags - (Dynamic Discovery) Allows devices to use DHCP option tags to discover a WDM Server.

· Manual Discovery in Management Console - (Manual Discovery from Wyse Device Manager) If no Dynamic Discovery method is used, you can use the Find Devices dialog box to discover devices from WDM (WDM Agents will respond to the server discovery by storing the discovered Web Server IP address and port and begin regular check-ins).

· Enable Automatic Discovery After Missed Check-ins - Select the number of missed check-ins after which you want the autodiscovery options enabled.

IMPORTANT: Due to this additional security feature, the default behavior of ThinOS has changed. By default, ThinOS will now search for the WDM server upon initial boot-up. However, administrators and high privilege users can modify this process according to your needs as follows: 1 - You can disable the WDM discovery feature entirely (for example, if you are not

2 Chapter 1

using WDM) by entering the following parameter entry into your wnos.ini file: RapportDisable=yes

2 - You can enable/disable the following two options in your wnos.ini file: DnsLookup=no DhcpInform=no 3 - You can manually disable any/all of the discovery features using the ThinOS GUI (uncheck any/all of the check box options in the WDM tab of the Central Configuration dialog box— System Settings icon > Central Configuration). 4 - You can select which discovery features you want to use from the WDM Console (see WDM documentation) and the client will then enable/disable based upon the WDM server selections.

Additionally due to this security feature, ThinOS will honor only supported realtime commands from WDM v4.9.1 or later.

• CMOS Central Management· CMOS Central Management (CCM) allows ThinOS administrators to easily manage

BIOS settings for large deployments of thin clients using central configuration methodologies. For details on this feature, see Administrators Guide: Wyse ThinOSTM.

• Wild Card Certificates· This feature works for IEEE802.1x Authentication EAP-TLS and EAP-PEAP. For

EAP-TLS, Validate Server Certificate is mandatory (be sure the check box is selected/checked), that means end user must have a root certificate. But for EAP-PEAP, Validate Server Certificate is optional. The server certificate text field supports a maximum of approximately 127 characters, and supports multiple server names. The following kinds of server names are supported (all examples are based on Cert Common name is "company.wyse.com"): company.wyse.com *.wyse.com *wyse.com *.com *

Release 7.1 Build 122 3

• VMware View Client Security Updates· The VMware View Client provides three security modes that govern verifying the

identity of the servers to which it connects: Warn on View (default), Full Security, and No Security. Use the Remote Connections dialog box (System Settings icon > Remote Connections > select VMware View) to configure the Security Mode you want. NOTES: It is recommended to use Warn on View (default) if the server certificate is self-signed. It is recommended to use Full Security if the server certificate is issued by a Certificate Authority (CA). Smartcard logon is not supported if the server certificate is issued by a CA (no matter which Security Mode you select). Smartcard logon is supported for Warn on View (default) and No Security modes if the server certificate is self-signed. For information on changing self-signed certificates to CA issued certificate, see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1008705.

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1008705

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1008705

4 Chapter 1

The following table provides details on VMware View Security Error handling results based on different configuration options.

Table 1 VMware View Security Error Handling Results

Security Mode Configuration Action Details

Full Security FQDN Cannot Continue

The certificate authority is invalid or incorrect.

FQDN + root cert Can Access

IP + root cert Cannot Continue

The host name in the certificate is invalid or does not match.

FQDN without root cert

Cannot Continue

The certificate authority is invalid or incorrect.

FQDN + expired root cert and server cert

Cannot Continue

The certificate authority is invalid or incorrect.The supplied certificate is invalid.

FQDN + expired server cert

Cannot Continue

The supplied certificate is invalid.

Revoked cert Not Supported

Key Usage Select a certificate and click the View Certificate command button to check.

Warn on View default

IP Can Continue The certificate authority is invalid or incorrect. The host name in the certificate is invalid or does not match.

FQDN Can Continue The certificate authority is invalid or incorrect.


Cannot Continue

The certificate authority is invalid or incorrect. The supplied certificate is invalid.

IP + root cert Cannot Continue

The host name in the certificate is invalid or does not match.

FQDN + expired root cert and server cert

Cannot Continue

The certificate authority is invalid or incorrect.The supplied certificate is invalid.


Can Continue The supplied certificate is invalid.


• Wyse® Virtual Desktop Accelerator 2.0 Support· Wyse® Virtual Desktop Accelerator (VDA) is a software product that, when used

with Wyse thin clients and supported PCs, provides an “accelerated” user experience on remote desktop sessions with high round-trip delay between the server and client. By accelerating the remote desktop protocols by a factor of up to three times on certain networks, a Wyse VDA session with a server located thousands of miles from your client “feels” similar to a non-accelerated session with a server located just a few hundred miles from your client. Built for use on high-bandwidth high-latency networks that are prone to packet loss situations, primary use cases for Wyse VDA include: Datacenter Consolidation Desktop Cloud Computing Remote Off-Shore Desktop Computing

• Additional INI Support

Table 2 New and Modified INI Parameters/Options (defaults in bold)

Parameters and Options Description of new

ConnectionBroker= has the following new options:• [IgnoreProfile={no, yes}] • [SecurityMode={None,Warning,Full}]

IgnoreProfile — Set "IgnoreProfile=yes" to disable parsing the global setting from the VDI broker. It is only valid in the case of ConnectionBroker=default.SecurityMode — SecurityMode specifies the security mode for the VMware broker. It is only valid in the case of ConnectionBroker=VMware, as follows:• Set SecurityMode=Full to have the View Client

verify the server's certificate in highest security mode; if any relevant checks error, it will fail to connect to the server.

• Set SecurityMode=Warning to have the View Client allow connection continuation in the following two specific exceptions where Full verification would fail:

(1) Certificate is self-signed. (2) Certificate has an invalid time. • Set SecurityMode=None to have the View

Client allow connection without any certificate verification.

CustomInfo={yes, no} [Custom1=custom1_str] [Custom2=custom2_str] [Custom3=custom3_str] [Location=location_str] [Contact=contact_str]

Yes no option to configure/store custom information. If CustomInfo=yes, the custom information configured by the following options will be stored into NVRAM. If CustomInfo=no, the custom information in NVRAM will be cleared. For example:CustomInfo=yes custom1=11 custom2=2 custom3=3 location=wyse contact=peter

6 Chapter 1

Device=audio has the following new option:• [min_cache={1-50}]

Device=audio options in Table 6 "Peripheral Settings: wnos.ini files and {username}.ini Files" updated to include:• min_cache to configure the ThinOS audio

playback minimum buffering amount (in ten millisecond units). "min_cache" can be used when network bandwidth is not large enough to play audio smoothly. In such cases, set "min_cache" higher, so that ThinOS will buffer more audio data before playing the audio.

Device=cmos [Action={extract, restore}] Extract — For extract action, CMOS content is saved to the file: $PF_cmos.$VER($PF - Is the name of the platform, including VL10, C10, and R10)($VER - Is the version of the BIOS, such as 1.0B_SPC001(1.0B_SPC001-0407), 1.0B-0407(Zilch), 1.0H_SPC-0T51(R10, R00), 1.19R(VL10))With a Wyse ThinOS log: "CMOS: extract to $PF_cmos.$VER"

Restore — For restore action, CMOS content is updated from the file: $PF_cmos.$VERWith a Wyse ThinOS log: "CMOS: restore from $PF_cmos.$VER"

When using this feature, there should be a special INI user name such as "cmos". The associated ini/cmos.ini should include one line as "Device=cmos Action=extract" (NOTE: Do not include "Device=cmos Action=extract" in a global INI file such as wnos.ini, as it will take no effect if it is included in the global INI file).After the administrator configures the CMOS on a template unit, the administrator should sign on to the "cmos" account on Wyse ThinOS to have the CMOS content saved to the cmos file on a writable File Server wnos directory. Then, the wnos.ini should be configured with "Device=CMOS action=restore", so that all target units will be updated with the same CMOS setting as the template unit after reboot.Once the restore action is finished, both the "Device=cmos Action=extract" and "Device=CMOS action=restore" should be removed from the related INI files.

Device=Wireless has the following new option:• [DisableBand={None, 24G, 5G}]

DisableBand — Use to disable 2.4G or 5G 802.11 band. Default is None (do not disable any band).

DNSIPVersion={ipv4, ipv6}[DNSServer=server_list][DNSDomain=dns_domain_url]

Specifies the DNS server and domain. Default IP version is ipv4. [Introduced in build 7.1_115]The DNSServer is an IP list separated by ";" or ",", max size of this list is 16.

Table 2 New and Modified INI Parameters/Options (defaults in bold), Continued



EnableCacheIni REMOVED IMPORTANT CAUTION: This parameter is no longer supported and cannot be used. It is replaced by the MirrorFileServer parameter (see MirrorFileServer parameter).

IEEE8021X has the following new option:• [peapgtcpwdEnc={password for encrypted for

EAP-PEAP/EAP-GTC}]

IEEE8021X options in Table 7 "Connection Settings: wnos.ini files and {username}.ini files" updated to include:• [peapgtcpwdEnc={password for encrypted for

EAP-PEAP/EAP-GTC}].

IPProto=ICMP[DisableTStamp={yes, no}] [DisableEcho={yes, no}]

Configures the ICMP protocol. DisableTStamp — If DisableTStamp=yes, the system will not reflect the ICMP timestamp (13) request. DisableEcho — If DisableEcho=yes, the system will not reflect the ICMP echo (8) request. In this case, the unit cannot be pinged.

MirrorFileServer={yes, no} If MirrorFileServer=yes, all the files from the file server (for example, ini files, wallpaper, bitmap, font, locale messages etc.) will be saved into the local flash.Thus system would use the cached files when the file server is unavailable.With ThinOS 7.1 build or later, the original function of the ini cache is discarded and the mirror file server replaces it.

SessionConfig=ALL has the following new options:• [DisableResetVM={no, yes}] • [WyseVDAServerPort=serverPort]• [FullScreen={no, yes}]• [Resolution={default, vga_resolution}]

Additional options include:• DisableResetVM — Set

"DisableResetVM=yes" to disable "Reset VM" function. As default, this function is controlled by the server side including VMware View or Citrix PNA.

• WyseVDAServerPort — Sets "WyseVDAServerPort" for a ThinOS VDA client. The default port is 3471. The port range must be from 1029 to 40000. For example, "WyseVDAServerPort=3000", sets VDA server port to 3000 and the client will connect to the VDA server using this port.

• FullScreen to specify the default screen mode.• Resolution to specify the session resolution.

For example, 640 x 480 and so on (refer to supported resolutions).

SessionConfig=ICA has the following new option:• [CGPParseMessageLen={yes, no}]

Yes/no option to have the CGP parse the incoming stream before receiving the full package. By default CGP will parse the stream.

SessionConfig=RDP has the following new options:• [RDPScreenAlign4={yes,no}]• [WallPaper={yes, no}]• [Dragging={yes, no}]• [Animation={yes, no}]• [Theme={yes, no}]

SessionConfig=RDP options in Table 7 "Connection Settings: wnos.ini files and {username}.ini files" updated to include:• RDPScreenAlign4 to force RDP session width

to 4 pixels aligned• "WallPaper", "Dragging", "Animation" and

"Theme" options to set the RDP experience



8 Chapter 1

Shutdown={standby, turnoff} Specifies the system state when shutting down the unit. If set to standby, the ThinOS system is suspended. When the unit boots up, it is resumed. It does not go to the BIOS and thus boots up quickly. If set to turnoff, the system is turned off. When the unit boots up, it first starts the BIOS then ThinOS. The default is turnoff.

SignOn= has the following new option:• [ExpireTime={1 - 480}]

ExpireTime — Specifies the signon expiration time. The range is 0 to 480 minutes. The default is 0 which means no expiration.If the value is larger than 480, then 480 is set instead. If the value is smaller than 0, then 0 is set instead.After system signon or launching a connection, the expiration time starts counting. Once the expiration time is reached, launching a connection (click icon, menu or connection manager) will bring up a pop up message box to input the password. Only if the password is same as the original signon password, will the session be launched.If the terminal is locked and unlocked with the password, the signon expiration time starts counting again.

SysMode= has the following new options:• [ToolbarAutoQuit={yes, no}] • [ToolbarStay={1~20}]

ToolbarAutoQuit — ToolbarAutoQuit=no will prevent the sub-window from being closed. The toolbar will auto-hide after a certain amount of time after user moves the mouse pointer away from the toolbar.ToolbarStay — ToolbarStay={1~20} controls the auto-hide duration, 0.5s per value. Thus if ToolbarStay=1, the Toolbar will auto-hide after 0.5 second; If ToolbarStay=10, the Toolbar will auto-hide after 5 seconds.

TcpMaxRetransmission={2~12} Configures the retransmission of a TCP connection. The default value of this option is 5.

WakeOnLAN={yes, no} By default, for C10 the WakeOnLAN setting is set to no.To use the WakeOnLAN parameter, the C10 must use BIOS version 1.0B_SPC001 or later. If WakeOnLAN=yes, the C10 will respond for the Wake-On-LAN packet for remote a wake up. If WakeOnLAN=no, the C10 or will not respond for the Wake-On-LAN packet.

WINSServer=server_list Specifies the WINS server address. The WINSserver is an IP list separated by ";" or ",", with a maximum list size of 2.




• Additional Notes and Reminders· EnableCacheINI - EnableCacheINI has been depreciated since build 7.1_033.· Unsupported Headsets - When a headset device is not supported by ThinOS it

can be force redirected into the session using the following parameter: Vusbaudio=Yes NOTE: If you are using ICA redirection, the above will not work. This is due to the fact that RAVE looks for the local device to also bring to the audio from the remote session. When you force the headset into the remote session, it is no longer recognized as a local device, thus you will get no sound from the headset.

· Video or Sound Pauses - When Video or sound pauses with H.264 Redirected Playback within XD5 and XD5 SP1 change the value to 1 in the [HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\SpeedScreen] registry as follows: SkipFlowControl"=dword:00000001

· Using CAG - In some situations in order to use CAG you will be required to enact the following policy: REQ.HTTP.HADER USER-Agent CONTAINS WYSE THINOS; not citrix receiver.

· Using the Timezone Parameter - In some situations the Timezone Parameter will not display properly. A workaround to this issue is using the following Single Brackets for timezone settings: TimeZone='GMT+05:30' must have Manualoverride=yes

· Using the Resolution=DDC Parameter - When using the Wyse Y Cable, DDC will properly work on both monitors by default. However, if connected to R10L/R00x clients and you are using Dual DVI, then you must add the following DualHead INI parameter and DualHead option for DDC to properly work on both monitors: Parameter: DualHead=yes Option: ManualOverride=yes

10 Chapter 1

Fixes

• CIR55527/TIR60449: Implement a parameter to enter WINS and DNS settings.• CIR57240/TIR61569: ThinOS Belgium (comma) keyboard layout support.• CIR59336: SelectServerList field definition & presentation enhancements.• CIR59687: Root Certificate Authority (CA) verification.• CIR59748: Dual Monitor Screen Resolution.• CIR59872: USB Device reconnection failed after server restart.• CIR60701/TIR62495: Turkish F Keyboard Characters Mapping. • CIR60704/TIR62488: Turkish Q Keyboard Characters on C10LE connection screen. • CIR60742/TIR62717: RFIDeas USB Touch and Go not working with ThinOS 7.x. • CIR60763/TIR60942: The Application icons are lost when smooth roaming from PC to

Thin Client. • CIR60788/TIR62372: Need ability to hide "edit" button in connection manager.• CIR60865/TIR60879: C10LE cannot open files and folders on USB in Azeri language

setting.• CIR60954/TIR61641: Have all Pub App/Desks be forced to Full Screen via wnos.ini.• CIR61045/TIR61132: Password containing danish characters rejected. • CIR61258/TIR61288: 802.1x - DHCP loop on failed logon.• CIR61321: TC cannot connect to the central FTP in network of some 3 Layers

switches.• CIR61583/TIR61594: ThinOS: RDP Reconnect parameter not working with 7.1_033 if

locale=German. • CIR61746/TIR62301: 2748578: keeps link up when user already power-off device.• CIR61803/TIR62092: Need ability to fill the custom fields through ini. • CIR61807:TTL on ThinOS. • CIR61818: XenApp 6.5 published App redraw fails intermittently.• CIR61946/TIR61998: Logon Problem with non ascii characters in Username.• CIR61990/TIR62034: C10LE-7.1.036 distorted color resolution when connecting to

8bit 2003 server. • CIR62242/TIR63014: PNAgent activity idle timeout needed.• CIR62282: Cannot connect to Citrix Publish Applications.• CIR62316/TIR62517: Issue with Adesso AKB-410UB USB keyboard. • CIR62468: Practice Partner Published Application has issues with check box fields.• CIR62538/TIR62554: WYSE THINOS 7.1 sends incorrectly-formatted MAC address to

View 4.5 VM.• CIR62563/TIR62779: Need autosignoff=yes to work when connecting through Quest

broker. • CIR62855: Password change in a Citrix environment.• CIR62879/TIR62902: wrong display of IP and time counter on a VNC shadowing

request.• CIR62949/TIR62966: Shutdown/Reboot not functioning properly in all Use Case. • CIR63000/TIR63004: Incorrect time zone for Russia in WYSE THINOS.• TIR57686/CIR57668: No color options when using SMB printer from WYSE THINOS.• TIR60126/CIR60098 - After network down/up DHCP Request does not occur.• TIR60241: If check on "validate root cert" option, "connect to these servers" should be

checked on automatically.• TIR60445: remote CMOS update to change BIOS password needed.


• TIR60446: remote CMOS update needed to change Bootmenu "p-key" behavior.• TIR60685: Single screen with DualHead=yes does not use only one screen.• TIR60934: Under-lapping Seamless Windows.• TIR60972: Background visible between Taskbar and Maximized Published seamless

application.• TIR60972: Background visible between Taskbar and Maximized Published seamless

application. • TIR61079: Certificate content get corrupted when dragging the scroll bar.• TIR61080: Mic in camera display as blank in Peripherals->Audio.• TIR61081: Mouse wheel does not work in Certificate Details Field.• TIR61082: Folder name is missing in Certificates Browser page. • TIR61107: Show the garbage character in shutdown dialog.• TIR61108: The dialog for pressing '"v" button should not be the same as "g" button

during the restart.• TIR61109: "ESC" button does not work in Device Viewer page.• TIR61112: Desktop Experience setting has been erased after unchecked "Optimize for

low speed link".• TIR61113: Mouse wheel cannot adjust volume in Volume Control of status bar.• TIR61119: The time duration of Ping result is a negative value. • TIR61120: the picture for formURL or icon cannot display by span monitor mode. • TIR61128: The network adapter is always busy (flashing frequently).• TIR61133/CIR60929: WYSE THINOS C10LE-7.1.0_33 - cannot render Google Maps

Or Bing Maps over RDP.• TIR61152: Pixels are missing, the left border of screen cannot be shown for secondary

monitor which resolution is 1920x1200. • TIR61157: Meaningless pop up message after removing smartcard after logging in to

VMware View with a smart card. • TIR61161: VMware View display pre-login message as error message and the dialog

box is too large.• TIR61174: Please disable "Whole Screen" for Taskbar when selecting Vertical layout.• TIR61175: Backspace key is so sensitive to delete words.• TIR61178: The screen2 will be dazzling monitor when screen2 rotated.• TIR61179: There will be an unnecessary background screen during the switch

between two XenDesktop sessions. • TIR61182: Check box "Connect to these servers" is disabled to check.• TIR61187: Right click menu cannot work well. • TIR61217: Display name will be cut when browser the printer whose name contains

space.• TIR61220: Still import successfully when 2 certs have the same name but different

contents and they have the same content after imported.• TIR61246: WYSE THINOS Holding down V key does not bring up the system in

display recovery mode.• TIR61251: Connection description should not be cut when save it and better restrict

the input length before save.• TIR61252: "Required filed missing" jump to wrong place in Options tab.• TIR61253: Create an ICA session to connect to an application, screen mode will be

grey.• TIR61255: the Taskbar will be show by Zero Launchpad.• TIR61310: Fail to redirect the camera when it is in preview status in WYSE THINOS. • TIR61311: Broker sign on does not read Gemalto smartcard.

12 Chapter 1

• TIR61320: when move the window, the display is not well by rotate mode. • TIR61322: Microphone cannot connect to local devices in ICA session.• TIR61328: XenDesktop desktop's connection description are replaced by those

sessions' connection description added manually after clear locally saved connections. • TIR61364: Background displays as blurred screen when unlocked the terminal. • TIR61371/CIR60941: Keyboard stop functioning in RDP sessions from WYSE

THINOS 7.1 with ACS;s SC reader.• TIR61464: The USB device redirection type drop down list covers GUI of map all disks

under z.• TIR61465: "Copy to Full Screen to clipboard" was disabled for a while when session

was launching.• TIR61531: Startup language still English.• TIR61571: Should not treat all the files as folder when browsing cert from FTP.• TIR61575: The mouse pointer is not displayed properly.• TIR61595: System shuts down immediately when plugging out power cable.• TIR61597: The System info dialog backdrop will stay in video.• TIR61599: Volume up/down not effects in mute status will effect when changing to

volume on status.• TIR61604: Cannot hear audio when playing a media file in XenDesktop server at full

volume of media player.• TIR61606: There is no audio when playing the media file in XenDesktop server for the

third time.• TIR61640: C10LE application in dual monitors is opening across both monitors.• TIR61658: Should give a notice when user enters an invalid character for terminal

name. • TIR61659: Kerberos Authentication incorrectly detect semicolon when specify FQDN

and IP as RDP hostname.• TIR61660: There is too much noise in Logitech analog earphone.• TIR61839: Fail to connect to WDM using SSL and get "read error:5901".• TIR61994: The content is dislocated by dragging System Info dialog during broker

initializing.• TIR62061: Only 51 characters can be input into validate server field whose maximum

capacity is 127 characters. • TIR62065: Wyse logo not center alignment when the hostname is too long.• TIR62066: The XenApp publish Desktop display not well when set resolution as

Seamless. • TIR62069: The operation "Power Down" has been canceled when clicking the Power

Down dialog not the cancel button. • TIR62089: Can resize an ICA session with default resolution in classic mode. • TIR62090: Enable mute option on media player and ThinOS at the same time, should

not hear the audio when only un-mute the audio on ThinOS.• TIR62093: "Not enough space" popped up when trying to auto logon invalid RDP

server.• TIR62094: Reconnection for XenDesktop and XenApp server cannot work when

disconnect the session from PNA button.• TIR62099: Press Alt+Tab to switch between XenApp session and Thin OS desktop will

make the session pop up extra letters around the menu of the session. • TIR62102: The description words of the "Activeclient card reader not detected" dialog

in a XenApp session on the switch bar are garbled.• TIR62140: There will be several overlapping WMP taskbar when drag the scroll bar of

the session.


• TIR62161: The tips of file server address only appears after importing a cert once.• TIR62162: Behave not properly when input long string in FTP path for import

certificate.• TIR62164: Cannot drag the launched XenApp application up after click another

application but do not launch it. • TIR62166: The tooltip for application icon on ThinOS desktop will leave on the

launched application when move cursor out of the application. • TIR62167: "Delete" and "View Certificate" buttons are enable unexpectedly when

highlight a folder in Cert Manager window.• TIR62184: Need to handle properly for seamless mode of ICA desktop.• TIR62191: File Server cannot be opened in Certificate Center when left username filed

blank. • TIR62193: Error message when signing on with VMware View broker.• TIR62219: The session taskbar are covered by WYSE THINOS taskbar in span mode.• TIR62226: Notepad in seamless mode cannot display well.• TIR62299: "File Servers:" partially display as "File Serve" in cert mgr. • TIR62301: 2748578: keeps link up when user already power-off device.• TIR62371: Client does not adapt server's SSL setting on "warn on view default" mode.• TIR62374: "Warn on View default" radio button should be selected by default in

VMware View Broker setting page.• TIR62375: Microsoft and Other brokers should not have client certification setting.• TIR62376: Host name cannot be resolved in VMware View broker with Full Security.• TIR62380: "BOOTP" partially displays as "BO" in network properties. • TIR62381: "Re-connection:" partially displays as "Re-connect" in RDP/ICA connection

setting page. • TIR62402: The number keyboard will be locked when login the ICA session.• TIR62414: WYSE THINOS 7.1 will not pass through password with character like £ to

a connection.• TIR62431: Removing smartcard should kill the warning dialog box.• TIR62458: The taskbar is shown in subsidiary screen when set the Taskbar as Main

Screen. • TIR62498: When select lowband=yes should disable font smoothing when connect

ICA.• TIR62682: Fail to connect the RDP session with hostname as (10.2.2.2;test.<DNS

Domain>).• TIR62684: The seamless application display incorrectly when move it to the middle of

two monitors. • TIR62758: Changing build from CHS to US, locale language does not adapt

automatically.• TIR62795: Automatically add redundant certs to WYSE THINOS when using Full

Security mode of VMware View server.• TIR62814: No alert but failing directly when accessing https file server without root

cert.• TIR62866: Cannot logon the view server by IP + self-sign certificate at Warn on View

default Mode.• TIR63180/CIR62511: Smartcard login to VMware View Broker 4.6 very slow.• TIR63191: dialog box not refreshed/on top when max/minimize XenDesktop session.• TIR63213 - 2757702 WYSE THINOS network trace does not wait until USB stick is

mounted.• TIR63265: Need to forbid Ctrl+Alt+Right arrow to lock terminal when signing off

account from XenDesktop.

14 Chapter 1

Build Details

C10LE

R10L

S10

Table 3 C10LE English (us) Build Details

Title Description

Platform(s) C10LE

Version WTOS 7.1

Build Number 122

Build File Name C10_wnos

Localization US

Table 4 R10L English (us) Build Details

Title Description

Platform(s) R10L

Version WTOS 7.1

Build Number 122

Build File Name R10_wnos

Localization US

Table 5 S10 English (us) RCA_wnos Build Details

Title Description

Platform(s) S10

Version WTOS 7.1

Build Number 122

Build File Name RCA_wnos

Localization US


T10

V10LE

Table 6 S10 English (us) RCA_boot Build Details

Title Description

Platform(s) S10

Version WTOS 7.1

Build Number 122

Build File Name RCA_boot

Localization US

Table 7 T10 English (us) Build Details

Title Description

Platform(s) T10

Version WTOS 7.1

Build Number 122

Build File Name T10_boot

Localization US

Table 8 V10LE English (us) Build Details

Title Description

Platform(s) V10LE

Version WTOS 7.1

Build Number 122

Build File Name VL10_wnos

Localization US

16 Chapter 1

Platform SupportThis section contains:• "Software Compatibility"• "Supported Codecs"• "Tested Peripherals"

Software Compatibility

• Wyse Device Manager 4.9.1 only (CAUTION: Wyse ThinOS 7.1 Build 122 is not compatible with prior versions of WDM)

• Wyse TCX Suite 4.1.0.19• Wyse USB Firmware Tool 1.16

IMPORTANT: Wyse USB Firmware Tool is not supported on the T10 platform.• Wyse VDA 2.0

Supported Codecs

Table 9 Supported Codecs

Title Support Format

Audio • WMA1, WMA2, WMA3• AAC• MP3

Video • WMV7, WMV8, WMV9• H264


Tested Peripherals

Table 10 Tested Peripherals

Device Category Models

Keyboard/Mouse • BenQ BE800 wireless keyboard/mouse (S/N KEK7800803039 - S/N MOK7800803309)

• Cherry keyboard (G83-6105IRNFR-2/05)• Logitech EX100 wireless keyboard/mouse (P/N 820-002657 - P/N

810-001806) • Logitech Media Keyboard K200/mouse B100 (P/N 820-003180

P/N 810-002149)• Logitech MK520 Wireless keyboard/mouse (P/N 820-002864 - P/

N 910-001878)• Microsoft ARC keyboard + mouse (S/N 0204400159959 - P/N

X817620-017)• Microsoft Business hardware pack, wired keyboard/mouse (S/N

7619804075138 - P/N X800472-114) • Microsoft Laser desktop 6000+mouse (S/N 7796700513657 - P/N

X803468-014)• Microsoft wireless keyboard/mouse 4000 P/N X811684-004 - P/N

X806443-004)• Microsoft wireless keyboard/mouse 5000 (S/N 0200800501627 -

P/N X820594-003)• Microsoft Wireless Optical Mouse 2000 (P/N X821682-001) • Wyse Keyboard PS/2• Wyse USB keyboard/mouse

Mobile BlackBerry Model (support for synchronization only, not tethering)

• 9650 (OS version/Platform: 5.0.0.1030/4.2.0.451)• 8900 (OS version/Platform: 5.0.0.1036/5.2.0.104)• 8830 (OS version/Platform: 4.2.2.196/3.0.0.84)• 8310 (OS version/Platform: 4.5.0.182/4.5.0.182)

18 Chapter 1

Monitor • Acer V233Hbd (1920 x 1080) • Dell 1704FPT • Dell 2001FP • Dell 2007FPb• Dell 2209WA• ELO entuitive (Touch Screen) (E993101)• Hanns.G Hi221D• MicroTouch 3M• HP LE1901w• Philip 240PW9 (1920x1200)• SAMSUNG SyncMaster T220+ • ViewSonic VP2030b• ViewSonic VP2365WB• ViewSonic VX2433wm (1920x1080)

Printer • Epson LQ_20K PN: P381A• HP Color LaserJet CM1312MFP PN: CC430A• HP Laser Jet P2035 PN: CE461A• HP Laser Jet P2035 PN: 860-000319• HP Laser Jet 1022n PN: Q5913A• HP Laser Jet P2055D • HP LaserJet 6L• OKIPOS® 425D Series Dual-Roll Multi-Task • Xerox DocuPrint C1110 PNs: HAT044231E/ 100S12604• Xerox Phaser 6130 (Validated as Local printer) (HAT044231E/

100S12604)

Table 10 Tested Peripherals, Continued



USB Headsets • AONI USB-526MV• G-NORTEL Deskphone IP8501• Logitech A-00015 G330 PN: 881-000065• Logitech A-0356A • Logitech G330 (PN 881-000065) • Logitech S-150 PN: S-00038• Logitech USB Handsets• Logitech USB Wireless Handsets PN: A-00007• Microsoft LifeChat LX-300 USB earphone • NORTEL Mobile USB headset adapter PN: N0071606

NTEX14MAE6• Plantronics Audio 625 USB (PN 76810-01)• Plantronics 655 DSP• Plantronics BLACKWIRE C420 PN: N10687• Plantronics BLACKWIRE C610 PN: N10687• Plantronics BLACKWIRE C620 (PN 81965-41)• Plantronics D100 Wireless IC: 457A-D100X• Plantronics DA40 (PN 71800-41)• Plantronics DA45• Plantronics DA55 PN: AY7554• Plantronics DA60• Plantronics P420 Speakerphone (PN 82136-02) • Plantronics P820 (PN 83657-01)• Plantronics PLT USB Adapter 02• Plantronics Savi W440 (PN 83359-01) • POLYCOM Deskphone CX200• SONIC EV-87 PN: SQEV87C20910000803

USB Hub • CYC-USB HUB

USB Pen Drive • ADATA S102 16 GB• Kingston DataTraveler 2 GB• Kingston Mini Fun 8 GB• SanDisk Cruzer USB 4G• SanDisk Cruzer CZ36 8 GB

USB-to-Serial • MCT USB-to-Serial converter U232-P9

USB Webcam • Logicool Qcam® Fusion PN: 861304-1000• Logitech C310 PN: 860-000259• Logitech Pro C910• Logitech USB Webcam 9000 PN: 502-000010• Microsoft LifeCam 3.0 Cinema PN: X821404-001



20 Chapter 1

Smart Card SupportICA and RDP support includes (1024 and 2048 certs):• Cyberflex 64K Applet V1 with driver ActivClient 6.1• Cyberflex 64K Applet V2 with driver ActivClient 6.1• Etoken 64K (USB key) with driver Etoken_PKIClient_5.1• Etoken 72K with driver Etoken_PKIClient_5.1• Gemalto .net V2 with driver BaseCSP• Gemalto .net V2+ with driver acm8.2.0.0

2 Release 7.1 Build 111 (T10 Product Release)This section contains:• "New Features"• "Known Issues"• "Build Details"• "Platform Support"• "Wyse TCX Multimedia (MMR) Test Results"• "Smart Card Support"• "Resolution Support"

New Features



CustomInfo={yes, no} [Custom1=custom1_str] [Custom2=custom2_str] [Custom3=custom3_str] [Location=location_str] [Contact=contact_str]

Yes no option to configure/store custom information. If CustomInfo=yes, the custom information configured by the following options will be stored into NVRAM. If CustomInfo=no, the custom information in NVRAM will be cleared. For example:CustomInfo=yes custom1=11 custom2=2 custom3=3 location=wyse contact=peter

SessionConfig=ALL has the following new options:• [FullScreen={no, yes}]• [Resolution={default, vga_resolution}]

Additional options include:• FullScreen to specify the default screen mode.• Resolution to specify the session resolution.

For example, 640 x 480 and so on (refer to supported resolutions).

22 Chapter 2

Known Issues

• TIR61105 - One minute after clicking Cancel with a non-network connection, the System Tools page closes.

• TIR61155 - Tool tips leaves a black rectangle in a session.• TIR61186 - Graphics remain when moving the cursor to different text boxes in Outlook

2010.• TIR61199 - When opening Microsoft Office Picture Manager, the content in the taskbar

displays RDP and not the application name.• TIR61206 - Some published applications do not display correctly in seamless mode.• TIR61319 - When using smart card required login mode, the four command buttons on

the VMView login page are disabled.• TIR61502 - After thin client logon with wireless, copying a file from USB disk to XenApp

takes a significant amount of time.• TIR61756 - The Authentication Properties window displays incorrectly after an Error

message is displayed.• TIR61937 - Parts of Windows Media Player do not display correctly during a

reconnection to a Windows Media Player RemoteApp session.• TIR61940 - Windows Media Player cannot be displayed in Full-screen mode after

switching between a ThinOS desktop and a RemoteApp Windows Media Player session.

• TIR61975 - After maximizing the RemoteApp Windows Media Player application, the Windows Media Player taskbar is covered by the video screen.

• TIR62069 - The Power Down process is canceled after clicking the Power Down dialog box and not the Cancel button.

• TIR62088 - Certificates cannot select the correct Root Certificate when two Root Certificates have the same issuer.

• TIR62091 - The Ctrl+ESC key combination does not work when using PEAP/LEAP authentication without any pre-information.

• TIR62168 - After closing Windows Media Player, the system sound does not play/work properly.

• TIR62178 - After launching a XenApp6.5 application in seamless mode, pictures do not display correctly.

• TIR62188 - ThinOS and the media player do not respond when trying to add several media files to a media player playlist.

• TIR62202 - After detaching and reattaching a Logitech camera to the thin client, the camera microphone does not work.

• TIR62208 - After switching between XenDesktop Win 7 and a ThinOS desktop for three to four times before the Active card dialog box disappears, the session desktop cannot refresh.

• TIR62221 - After detaching and reattaching a USB headset, the headset cannot be redirected to XenDesktop.

• TIR62223 - Login fails when using an RSA token from next token status.• TIR62226 - Notepad in seamless mode doe not display correctly.

Release 7.1 Build 111 (T10 Product Release) 23

Build Details

Table 12 T10 English (us) Build Details

Title Description

Platform(s) T10

Version 7.1

Build Number 111

Build File Name DOVE_boot

Localization US

Table 13 T10 Japanese (jp) Build Details

Title Description

Platform(s) T10

Version 7.1

Build Number 111

Build File Name DOVE_boot.jp

Localization JP

24 Chapter 2

Platform SupportThis section contains:• "Software Compatibility"• "Supported Codecs"• "Tested Peripherals"


• WDM 4.8.5 with hotfix HF04085016811 installed• Wyse TCX Suite 4.1.0.19

NOTE: Wyse USB Firmware Tool is not supported.

Supported Codecs




Video • WMV7, WMV8, WMV9• H264


Tested Peripherals



Keyboard/Mouse • Logitech Media Keyboard K200/mouse B100• Logitech MK520 Wireless keyboard/mouse (P/N 820-002864 - P/



7619804075138 - P/N X800472-114)• Microsoft wireless keyboard/mouse 5000 (S/N 0200800501627 -

P/N X820594-003)• Wyse USB keyboard/mouse

Mobile HD • BENQ external DVD-ROM• Maxtor Basics External Portable Hard Drive 250G

Monitor • Dell 1704FPT• Dell 2007FPb• Dell 2209WA• Philip 240PW9 • ViewSonic VP2365WB• ViewSonic VX2433wm

Printer • Epson LQ_20K• HP Color LaserJet CM1312MFP • HP Laser Jet 1022n • HP Laser Jet P2035 • Xerox DocuPrint C1110

USB Earphone • Logitech A-0356A• Logitech S-150• Plantronics BLACKWIRE C420• Plantronics BLACKWIRE C610• Plantronics D100 Wireless• Plantronics DA40• Plantronics DA45• Plantronics DA55• Plantronics DA60• Plantronics P820• Plantronics PLT USB Adapter 02• POLYCOM Deskphone CX200• SONIC EV-87

USB Hub • CYC-USB HUB

26 Chapter 2

Wyse TCX Multimedia (MMR) Test Results

Smart Card SupportICA and RDP support includes:• Cyberflex 64K Applet V2 • Etoken 64K (USB key) • Etoken 72K • Gemalto .net V2 • Gemalto .net V2+

USB Pen Drive • ADATA S102 16 GB• Kingston DataTraveler 2 GB• Lenovo 4 GB• SanDisk Cruzer Micro 1 GB • SanDisk Cruzer Micro USB 2.0 Flash Drive 2G• SanDisk Cruzer CZ36 8 GB• SONY 8 GB

USB Webcam • Logitech USB Webcam 9000• Logitech C310• Logitech Pro C910



Table 16 Hardware Acceleration Details

Hardware Acceleration (Passing Values)

RDP (2008 R2)

RDP (Win7)

VMView 5.0 (Win7)

ICA(2008 R2 +XenApp6.5)

ICA(2008 R2 +XenApp6.0)

XenDesktop 5.5 (Win7)

H.264 480p 720p

480p 720p

480p 720p

480p 720p

480p 720p

480p 720p

WMV/VC1 480p 720p

480p 720p

480p 720p

480p 720p

480p 720p

480p 720p


Resolution Support

TipAll resolutions support 16-bit and 32-bit color depth.

• 640 x 480• 800 x 600• 1024 x 600• 1024 x 768• 1152 x 846• 1280 x 720• 1280 x 1024• 1366 x 768• 1400 x 1050• 1440 x 900• 1600 x 900• 1600 x 1200• 1680 x 1050• 1920 x 1080 (Maximum dual-monitor support)• 1920 x 1200 (Single monitor only)

28 Chapter 2

This page intentionally blank.

3 Release 7.1 Build 033

This section contains:• "Fixes"• "New Features"• "Known Issues"• "Software Information"• "Supported Platforms"• "Supported Resolutions"

Fixes

• CIR55806/TIR56899: Support for VHA PIV card login.• CIR57785/TIR57789: Broker radio button configuration defaults back to the Xen server

if both Xen and VMware are configured.• CIR58816: Desire 1920 x 1080 resolution support with Viewsonic VA2231wm monitor

via VGA.• CIR58894/TIR59503: NT LAN Manager (NTLM) Authentication fails against a Window

Server 2008 R2 Domain Controller.• TIR58896/CIR58818: Use of USB Encryption Keys with XenDesktop.• CIR58906/TIR58955: Problems displaying application list after upgrading to ThinOS

v7.0_217.• CIR59252: In an ICA session while printing labels, the print job stops.• CIR59279: Device initiating BOOTP requests before DHCP requests.• CIR59566/TIR59678: In dual-head span mode, the color depth is not working as

expected with Kaviza 4.1.5. • CIR59593: Characters fading on Web-based forms with R10L devices.• CIR59604: S10 devices have a high CPU usage when sharing a desktop in

Netmeeting.• CIR59762: There is a shuffle when playing flash in IE.• CIR59803/TIR59824: ThinOS v6.5 produced a pop-up message to calibrate a

touchscreen while ThinOS v7.x does not.

30 Chapter 3

New Features

• RemoteApp (Microsoft Broker)· RemoteApp and Desktop Connection provides the ability to group RemoteApp

programs in a Windows Server 2008 R2 with Remote Desktop Session Host role installed, and make them available to end users. By specifying the broker server address in Broker Setup tab of the Remote Connections dialog box (System Settings icon > Remote Connections), ThinOS users are able to launch remote applications through Connect Manager or desktop shortcuts. The broker server address can begin with http, https, or no protocol prefix. For example, the following inputs are acceptable: http://ip OR http://FQDN https://ip OR https://FQDN IP OR FQDN NOTES: Due to default server settings, all connections will be attempted using https. Therefore, you must import the server certificate into your device before you can successfully make a connection. Seamless windows (for RemoteApp) are only supported in Classic Desktop mode (see Classic Desktop option in the Visual Experience tab of the Remote Connections dialog box (System Settings icon > Remote Connections).

• Microsoft RemoteFX· RemoteFX is a new technology included in Windows Server 2008 R2 and Windows

7 SP1 designed to improve the visual capabilities of Windows 7 Remote Desktop clients. Improvements include many 3D graphics capabilities, some OpenGL, full motion video, and USB redirection support for Hyper-V Windows 7 virtual machines. It requires that the server have a DirectX 10.0 capable graphics card and Hyper-V. The number of clients supported is based on GPU memory and processor. Requirements: VM desktop supports the RFX. RDP connection with True Color settings. R class devices only. NOTES: Differences compared to standard Remote Desktop Connection 7.0 client: Login windows turns to sky blue (used to be navy blue). Supports Windows 7 Aero mode by server GPU. 3D Enabled VM. HD Flash video support. RFX does not support force taskbar span while using multiple monitors.


RemoteFX Supported Resolutions: 1920 x 1080 1680 x 1050 1600 x 1400 1400 x 1050 1440 x 900 1368 x 768 1280 x 1024 1280 x 768 1280 x 720 1024 x 768 640 x 480 Resolutions that do not support full screen RFX display: 4360 x 768 1600 x 900 1366 x 768 1280 x 960 1152 x 864 800 x 600

• RemoteFX USB Redirection· ThinOS supports redirecting USB devices to a RemoteFX-enabled Windows 7 SP1

virtual machine running on a RemoteFX-enabled Remote Desktop Virtualization Host server. NOTES: Log entries similar to USB device XXXXXX opened for redirection will appear in the ThinOS event log when a USB device is redirected by using RemoteFX USB redirection. Due to USB limitations, a device redirected by using RemoteFX USB redirection can only be used in one RDP session at a time and cannot be used locally while it is redirected to the virtual machine. Drivers for redirected USB devices will be installed on the virtual machine by using the same process that a physical Windows computer uses when a device is attached. Ensure that Windows Update is enabled on the virtual machine or that drivers are available for the device you attach. If USB redirection does not work within RFX, you can test the USB on a Windows 7 device to see if the base protocol is supported (because Microsoft RFX is a version 1.0). The following devices are supported by RDP with RemoteFX USB redirection from ThinOS:

Table 17 Device and Redirection Method

Device Redirection Method

Audio (not a USB composite device) Audio redirection

CD or DVD drive Mapping

Palm PDA RemoteFX USB redirection

Printer (All-in-One Printer) RemoteFX USB redirection

Printer Mapping

Smart Card Reader Smart card redirection

32 Chapter 3

• Interface Language Localization· ThinOS now supports administrator-defined user interface languages within the

ThinOS operating system. Administrators can change preset translations or create their own translations to meet the needs of their users. ThinOS supports loading localization files from an FTP server and controlled by INI configurations as described in Table 19 "New and Modified INI Parameters/Options (defaults in bold)."

Implementation Example: Japanese Locale and Font:

a. Obtain copy of Japanese.msg file and Japanese.fnt file.

b. Access FTP server and create the Font and Locale folders within the wnos folder.

c. Put the Japanese.msg file into the locale folder (FTP\WNOS\Locale).

d. Put the Japanese.fnt file to the font folder (FTP\WNOS\Font).

e. Configure wnos.ini as follows: Place the Locale=Japanese Load=Yes parameters in the ini and save the ini file.

f. Optional: Add a User language selection menu within the system preference. This will enable the user to switch between different languages: Transfer additional language files LanguageX.fnt and LanguageX.msg to proper locations within the wnos folder, edit the above parameters (Locale=Japanese Load=Yes LocaleList=German, English) and save the ini file.

g. Restart the thin client. Japanese System Settings Example:

USB Camera RemoteFX USB redirection

USB Flash Drive Mapping

USB Headset RemoteFX USB redirection/play locally

USB Keyboard or Mouse Input redirection

Table 17 Device and Redirection Method, Continued

Device Redirection Method


• ICA RTP Audio· ICA-RTP audio uses UDP as an underlying transport, making it suitable for real

time audio data. Audio data that is not transported through RAVE (ICA multimedia redirection channel) will use RTP as a separate channel to transport. As a result, audio performance can be better when there is large amounts of audio data between the client and the server (for example, when you are using a VoIP application such as Skype). NOTES: Only supported in XenDesktop 5.0 FP1 or later. Policy Audio over UDP Real-time Transport should be enabled in XenDDC. No gateway connection (CAG) between the client and the server. The desktop session's encryption level must be Basic or 128 Bit login only. The UDP Audio Feature of the RTP Protocol will only be enabled if the Audio Quality for the session is set to Medium. Resultant audio quality would be the lower of the server and the client.

• Plug and Play in XA6.0 or Later· ICA PnP function can support two ways to map USB disks:

1 - Launch ICA session with Disks enabled first, and then plug in the USB disk; the USB disk can then be mapped to the server. 2 - Plug in the USB disk first, and then launch ICA session with Disks enabled; the USB disk can then be mapped to the server. NOTE: For users of earlier versions than XA6.0, you must use method 2 (Plug in the USB disk first, and then launch ICA session with Disks enabled; the USB disk can then be mapped to the server).

• Certificate Manger· To deploy an SSL-based application, the server must be configured so that it will

authenticate the identity of the client. If a user certificate is applied from the Root CA, then that user can access file servers/applications in the sub domain. Due to the fact that the Sub-CA is configured to be trusted automatically by the Root CA, when the client sends the entire certificate chain to the server in the root domain for authentication, the user will then be able to access file server/application in sub domain.

Certificate Management - Opens the Certificates Browser where you can select the Import From option you want to import a certificate (either USB Storage or File Server).

34 Chapter 3

USB Storage - If you select the USB Storage option, click Import to open and use the Import dialog box to find and select the certificate you want to use. The maximum importing path is limited to 128 characters and the maximum certificate name is limited to 64 characters. File Server - If you select the File Server option, click Import to open and use the Import dialog box to enter the detailed path to the certificate you want to use in the File Servers box (if necessary, be sure to use the correct Username and Password). Note that you must enter the absolute path of the certificate. For example: 10.151.121.100/wnos/cacerts/mycertificate.cer. The maximum importing path is limited to 128 characters and the maximum certificate name is limited to 64 characters.

• Wireless IEEE 802.11n· IEEE 802.11n-2009 is an amendment to the IEEE 802.11-2007 wireless networking

standard to improve network throughput over the two previous standards (802.11a and 802.11g) with a significant increase in the maximum raw data rate (from 54 Mbit/s to 300 Mbit/s with the use of four spatial streams at a channel width of 40 MHz. C10 and R10 with one antenna do NOT support 11n. This is by design, and validated with Linksys E3000 firmware 1.0.03. For clients that are have a single antenna and are connecting to certain Access Points, (for example, Linksys WAP4410N firmware 1.0.12) which are set to 802.11n only, the client will actually connect using the 802.11G protocol. Windows clients with the same configuration will have the same behavior. ThinOS will generate log files indicating that 11g is being used. NOTES: ThinOS 7.1 supports 300Mbps speed when an access point supplies 40MHz connection and 128Mbps speed when an access point supplies 24MHz connection. In a typical situation, an access point decides if the channel is 2.4GHz (1-13) or 5GHz, then clients and access points negotiate the channel width (which depends on the situation) or the channel width can be set to a static value on the access point.

Table 18 Wireless IEEE 802.11n

Platform Wireless Type Channel Bandwidth Connection Speed

C10 Dual Antennas 5 GHz 11n 20 MHz 150 Mbps

C10 Dual Antennas 5 GHz 11n 40 MHz 300 Mbps

C10 Dual Antennas 2.4 GHz 11n 20 MHz 81 Mbps

2.4 GHz 11n 20 MHz 76 MbpsWindows 7 Single Antenna


• Updates in EAP-PEAP -> MSCHAPv2 of Wireless/Wire Authentication· In properties window of MSCHAPv2, you can specify EAP Identity as the first level

of authentication (after which, MSCHAPv2 will occur). If you select the Enable Single Sign On check box, the thin client will use credentials of MSCHAPv2 to log-on to the ThinOS local desktop and establish the system variables $UN, $PW and $DN to logon to your RDP or ICA sessions.

• C Class with Hardware Codecs· Removed:

Divx3 MSMPEG4V2 MSMPEG4V3 video decoder

· Added: H264 WMV3 WMVA ACC audio decoder. There are now a total of 3 audio decoders (MP3, WMA and AAC) supported. NOTE: C class platform uses a hardware decoder, however R class uses software decoder.

• Support for Camera Microphones (Combination Units)· For USB cameras with built-in microphones, ThinOS will now recognize the built-in

microphone as a local audio recording device. You can also use the built-in microphone in remote sessions. However, it is not recommended to use the built-in microphone when the camera is capturing video (because the built-in microphone sometimes may not work by itself; this problem is also observed on Windows operating systems).

• MirrorFileServer Parameter· This is the new version of the previously used enablecacheini parameter that has

been removed from the ThinOS 7.1.x and later versions. You are now able to save the file server settings onto the local flash of the unit. This allows the client to boot to the configured state without having to have a connection to the file server. For example, ini files, wallpaper, bitmap, font, locale messages etc., will be all be saved into the local flash. Set MirrorFileServer=yes NOTES: S10 does not support this feature. After the MirrorFileServer=yes statement is specified in the wnos.ini, ThinOS will read it in the first restart, and the parameter will be effective after the second restart.

36 Chapter 3

This means that in order to have your unit cache everything in the wnos.ini file after upgrading to ThinOS 7.1.x you will need to do the following: 1 - Upgrade the unit and ensure that MirrorFileServer=yes statement is in your wnos.ini file. 2 - After the firmware has been successfully applied, the client will copy the ini contents locally onto the client. You will need to reboot the client one time for the new settings to be read properly. 3 - After the second reboot, the client will now be able to read the locally saved contents in the event it's unable to contact the file server.

• Updates to GUI:· Granular Control over USB Redirection - By default, audio, video, and printer

devices will not use HDX USB for redirection. You can make selections for USB device redirection on the Session tab of the Global Connection Settings dialog box. NOTE: For Web camera mapping, if the server does not support HDX USB redirection and you set this mode in the client, the client will use HDX Realtime Webcam Compression.

· Audio Options - A drop-down list has been added on the Audio tab of the Peripherals dialog box. When you connect a USB headset, its name will be shown in the drop-down list. The HD Audio option is for analog earphone use. The Boost option is for audio enhancement.


· Map All Disks Additions - A drop-down list has been added on the ICA tab of the Global Connection Settings dialog box allowing you to select additional drives for the Map all disks under setting (no longer only Z drive).

· Device Viewer Window - A Device Viewer window displays when you click the Device Viewer button (System Information > Devices) allowing you to easily view recognized devices. NOTE: This screen will provide USB information (PIV,VID,etc) needed for forcelocal= or forceredirect= INI parameters.

· Hide Domain Security Option - When EAP Type EAP-MSCCHAPV2 is selected on the Authentication Properties dialog box (for PEEP IEEE802.1x authentication), a new option to hide the domain is available for selection (the Username and Password text boxes are available for use, but the Domain text box displays gray).

38 Chapter 3



BootpDisable={no, yes} New parameter to support both DHCP and BOOTP to obtain the network configurations. In the first two tries, only DHCP is requested. Then, both DHCP and BOOTP are requested. For some environments, BOOTP requests will delay obtaining the IP from the DHCP server. Set BootpDisable=yes will only perform a DHCP request. This setting is only valid after the next reboot. (CIR59279)

ConnectionBroker= has the following new values:{Microsoft, VMware}

Additional ConnectionBroker values for VMware and Microsoft. Specifies the Connection Broker type. Select VMware to enable VDM XML support. If you enter VMware, the VMware logo appears on the log-in screen.

DO NOT use VDM as this value is being deprecated. [Microsoft Introduced in 7.1_022.][VMware Introduced in 7.1_023.]

Desktop=bitmap file[Layout={center, tile, stretch}][IconTextColor="rrr ggg bbb"]

Desktop — Specifies a bitmap file to be used as wallpaper for the local desktop. This file could be a 4-bit, 8-bit, or 24-bit BMP file or a standard GIF file or a standard JPEG file. The file must be located in the FTP server wnos\bitmap directory. Default is Wyse wallpaper. To disable the parameter, leave value blank (Desktop=). Layout — Specifies the arrangement on the desktop background of the bitmap file specified by the Desktop parameter (if auto dial-up is set, Layout is invalid). For center, the image is placed in the center of the desktop without image size change. For tile, the image is replicated across the desktop. For stretch, the image is modified to fill the desktop. NOTE: In dual-monitor mode, the wallpaper is replicated and specified separately for each monitor (instead of being shared by the two monitors).

IconTextColor — Specifies the icon text color in RGB string format (must be enclosed in quotes), where rrr, ggg and bbb are decimal numbers in the range of 0 to 255.


Device=camera[format=raw][width={camera supported width}][height={camera supported height}][fps={camera supported fps}][optimize={no, yes}]

Specifies the local thin client camera settings.format — Support only for raw video type (format=raw is fixed).width — The width of the resolution that the local camera supports.height — The height of the resolution that the local camera supports.fps — The fps (frame per second) of the resolution that the local camera supports.optimize — Yes no option to optimize the width, height, and fps at 320 x 240 at 10 fps That is, if optimize=yes, then 320 x 240 at 10 fps will be used for the local camera settings regardless of the individual settings in width, height, and fps (as long as the camera supports the 320 x 240 at 10 fps). If optimize=yes and the camera does not support the 320 x 240 at 10 fps settings, an error will be present in the Event Log of ThinOS.If optimize=no (default), then the individual settings in width, height, and fps will be used (as long as the camera supports them).[Introduced in build 7.1_025]

Device=Ethernet Device=Ethernet parameter option KeepAlive has values updated to 1 to 600 seconds.

EnableCacheIni is no longer supported. IMPORTANT CAUTION: This parameter is no longer supported and cannot be used. It is replaced by the MirrorFileServer parameter (see MirrorFileServer parameter below).

IEEE8021X= has the following new options:• Peapidentity• Peapsinglesignon• tlsauthtype• peapmschaphidedm

Additional options include:• Peapidentity to specify the identity/username

for PEAP.• Peapsinglesignon to enable single sign-on.• tlsauthtype={user, machine}• peapmschaphidedm option to have the

domain use saved peap MSCHAP domain name and the pop up dialog will not include the domain field when doing IEEE8021x authentication.

Language=code Language=code option ImageSuffix values updated to include localization builds with different suffixes according to the keyboard language.



40 Chapter 3

Locale={English | us | French | fr | German | de | Chinese Simplified | gb | Chinese Traditional | b5 | Japanese | jp | Korean | ko | Spanish Mexican | la} [load={yes | no}]

Additional Locale language values. Locale — Specifies the system language. Note: Locale changes the language for the user logon-experience screens only (displayed during boot-up and logon) and not the configuration or administrator screens.load=yes/no specifies whether or not to load the language file. The language file must end with the locale name and be placed under the folder wnos/locale in the file server. [Introduced in build 7.0.1_13] For example, if you want to specify French and load the localized messages, you must place a file named French.msg under the folder wnos/locale in the file server, and then add Locale=French load=yes in the INI file.IMPORTANT: For Chinese Simplified, Chinese Traditional, Japanese, and Korean localization, a font file must also be placed under the folder wnos/font in the file server. For example, if you want to specify the system language to be Japanese, you must place a file named Japanese.msg under the folder wnos/locale in the file server, place a file named Japanese.fnt under the folder wnos/font in the file server, and then add Locale=Japanese load=yes in the INI file. [Introduced in build 7.1_025]If you are under a Wyse maintenance contract, you can download .fnt and .msg files from your My Downloads page in the Wyse Self-Service Center at http://support.wyse.com/selfservice.html. If you are not under maintenance and wish to gain access to these files, you must complete a product registration.

LocaleList={English | us | French | fr | German | de | Chinese Simplified | gb | Chinese Traditional | b5 | Japanese | jp | Korean | ko | Spanish Mexican | la}

Additional Locale language values. LocaleList — Specifies a list of locale, so that a user can switch the system language as needed. All the values will be display in the GUI (System Preference -> General-> Locale). Be to place the required files, for example German.msg, Japanese.msg, Japanese.fnt, and so on under the correct folders as described in the Locale parameter description. [Introduced in build 7.0.1_13]



http://support.wyse.com/selfservice.html


MirrorFileServer={no, yes} Yes/no option to enable the cache all server files functionality (cache all server files such as INI files, wallpaper, bitmap, font, local messages and so on to the local flash when files are changed in the file server). Wyse ThinOS would use the cached files when files on the file server are unavailable. Default is set to no. S10 is not supported.[Introduced in 7.1_018]

MultiLogon IMPORTANT: DO NOT USE as this parameter is being deprecated. Use SelectServerList={PNA, VDI}.

NoReducer NoReducer option Encryption added to specify the default setting of encryption level for all ICA connections (ICA Only). [Encryption={Basic, 40, 56, 128, Login-128, None}]NoReducer — Yes/no option to turn off compression. Default is no, which enables compression. To turn off compression, enter yes.Used here this parameter is a global statement for all connections. It sets the default value of NoReducer.NOTE: By default both the ICA and RDP protocols compress their data to minimize the amount of data that needs to traverse the network. This compression can be as much as 50% for text-based applications (for example, Microsoft Word) and 40% less for graphics applications than the uncompressed data streams.

Encryption — (ICA Only) Specifies the default setting of encryption level for all ICA connections. The highest level is 128-bit security. The lowest is Basic. The default is Basic.

PlatformConfig=all[EncryptFS=yes]

New parameter to encrypt local flash, specifically cached INI files and credentials that are stored (if using signon=yes).NOTE: Event log will display new statements stating that FileSystem encryption has been enabled.

PnliteServer PnliteServer parameter updated to include • Option CAGRSAAuthMethod values LDAP

and RSA for authentication.• CAGAuthMethod option for CAG

authentication.CAGRSAAuthMethod or CAGAuthMethod — CAGAuthMethod option is used for CAG authentication configuration. NOTE: This option replaces CAGRSAAuthMethod. If CAGAuthMethod=RSA (it is same as the prior "CAGRSAAuthMethod=RSASecurid"), an extra passcode field needs to be input except username/password/domain. If CAGAuthMethod=LDAP, no passcode field is needed.



42 Chapter 3

RDPAudioQualityMode option for Connect=RDP IMPORTANT: DO NOT USE as this option is being deprecated.

Reconnect Reconnect options updated to include seconds value (the interval to wait before automatically restarting the connection after disconnect).

Resolution Resolution option [rgamma={1-100} ggamma={1-100} bgamma={1-100}] removed as this option is no longer supported.

SessionConfig=ALL SessionConfig=ALL options updated to include:• DefaultColor to specify the default color depth

to use for the session.• VUSB_DISKS, VUSB_AUDIO, VUSB_VIDEO,

and VUSB_PRINTER — Specifies if these USB devices will be redirected to the server using TCX Virtual USB or ICA/RDP USB redirection when USB redirection is enabled. By default, these devices are set as local devices.

SessionConfig=ICA SessionConfig=ICA option mapdisksunderz updated to include a driver letter to replace the default drive letter Z. For example, if MapdisksUnderZ=X, all the disks will be under the drive X instead of drive Z. New SessionConfig=ICA option USBRedirection to select the channel of usb devices redirection. Default is ICA|HDX. This option is recommended to replace older setting "device=vusb type={TCX, HDX}".

SessionConfig=RDP includes the following new options:[ForceSpan={no, yes}][EnableTSMM={yes, no}][EnableRecord={yes, no}][EnableRFX={yes, no}][USBRedirection={TCX, RDP}]

ForceSpan — Yes/no option to disable RDP Multi Monitor feature. Default is no.EnableTSMM — Yes/no option to enable RDP7 Multi-media redirect. Default is yes.EnableRecord — Yes/no option to enable RDP feature of recording from local. Default is no.EnableRFX — Yes/no option to enable Bitmap Codec RemoteFX. Default is yes.USBRedirection — Option to select the channel of usb devices redirection. Default is TCX.For example:SessionConfig=RDP MaxBmpCache=1024 DefaultColor=1 EnableNLA=yes ForceSpan=yes EnableTSMM=no EnableRecord=yes EnableRFX=no

SignOn SignOn options updated to include:• SaveLastDomainUser additional values of

user and domain. • DefaultINI=filename to specify the file name

which is in the default folder of the username ini files. If the {username}.ini is not found, this file will be loaded as default.

• PasswordVariables to enable variable mapping ($TN, $UN etc) for a password.




SwitchApplication IMPORTANT: DO NOT USE as this parameter is being deprecated.

SysMode=has the following new option:[ToolbarEnableOneSession={no, yes}]

ToolbarEnableOneSession — Yes/no option to enable the toolbar when only one session is available.

TcpTimeOut New TcpTimeOut values 1 and 2 to specify the timeout value of a TCP connection. The number of 30 seconds for the timeout value of a TCP connection. The value must be 1 or 2 which means the connection timeout value is from 1x30= 30 seconds to 2x30= 60 seconds.Values of 3-255 are recognized only for backwards compatibility (>2 = 60 seconds), however, these values should not be used and the value should be set to 2.

TCXLicense IMPORTANT: DO NOT USE as this parameter is being deprecated. The TCX Key is held on the server.



44 Chapter 3

Known Issues

• TIR59002: Video cannot be displayed correctly in an ICA session after moving around in the video or switching from another ICA session.

• TIR59014: While playing the video of an h.264 file, the playback will stop.• TIR59044: After changing ICA or RDP session auto-reconnect and delay settings, the

reboot and shut down counter dialog boxes do not display/perform correctly.• TIR59064: RemoteFX cannot display some full screen applications.• TIR59137: The same gateway is used regardless of the Use default gateway on

remote (PPPoE) network check box setting (checked or cleared).• TIR59143: The second DVI port does not work if the display resolution is set to 2560 x

1600.• TIR59146: Need to use INI files to configure EAP-TLS machine authentication.• TIR59148: A DPError will occur intermittently.• TIR59167: The Are you sure you want to disconnect? warning cannot be closed by

clicking No when quitting a PPPoE connection in Wyse Zero Desktop mode.• TIR59170: A green line displays on the bottom-right side of the media player after

using another media player.• TIR59194: Plantronics DA55 and DA60 USB headsets have significant noise when

moving the mouse pointer to the recording area of the Volume tab in the Peripherals dialog box.

• TIR59287: RemoteFX cannot center display in some resolutions.• TIR59383: After moving around media being played by Wyse® TCX Multimedia™,

there are some artifacts left on the screen.• TIR59432: After dragging a window mode ICA/RDP session, the shape of the login

dialog box changes.• TIR59915: Some areas of the desktop background will appear when clicking the Admin

Mode button after entering the wrong password for a user that is defined in the {username}.ini file.

• TIR59948: The color of the display name becomes white after enabling automatic reconnection at logon.

• TIR59951: Some window colors will be displayed incorrectly after switching windows using the Ctrl+Alt+DownArrow key combination.

Additional Notes and Reminders

• EnableCacheINI is No Longer Supported.• Unsupported Headsets in ThinOS 7.1 - When a device is not supported by ThinOS, it

can be force redirected into the session using the following parameter: Vusbaudio=Yes NOTE: If you are using ICA redirection, the above will not work. This is due to the fact that RAVE looks for the local device to bring the audio from the remote session as well. When you force the headset into the remote session, it is no longer recognized as a local device and you will not obtain sound from the headset.

• Video or Sound Pauses with H.264 Redirected Playback within XD5 and XD5 SP1 - If you change the following registry as described, video/sound will work as expected: HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\SpeedScreen] change the value to 1, for example, SkipFlowControl"=dword:00000001


• CAG Usage - In some situations in order to use CAG you will be required to enact the following policy (not the Citrix receiver): REQ.HTTP.HADER USER-Agent CONTAINS WTOS.

• Timezone Parameter - In some situations the Timezone Parameter will not display properly. When this occurs, use the following for timezone settings (single brackets) TimeZone='GMT+05:30' must have Manualoverride=yes

• RemoteFX Flash Playback Performance Issues - In some situations enabling the following local Group Policy can improve flash playback performance in RemoteFX sessions (set both parameters to rich): \ computer configuration\administrative templates\windows components\Remote Desktop Services\Remote Desktop session host\remote session environment\optimize visual experience when using RemoteFX.

46 Chapter 3

Software InformationThis section contains:• "Build Details"• "BIOS Details"

Build Details

C10LE

Table 20 C10LE English (us) Build Details

Title Description

Platform(s) C10LE

Version WTOS 7.1

Build Number 33

Build File Name C10_wnos

Size (Bytes) 5070684

MD5 5F4370BB09F2F2BF45725AB4E05E2B18

Checksum32 271FF0DB

Localization US

Table 21 C10LE Chinese Simplified (gb) Build Details

Title Description

Platform(s) C10LE

Version WTOS 7.1

Build Number 33

Build File Name C10_wnos.gb


MD5 57A34870D0BAD64CFB0ECF516A4B861F

Checksum32 2679A4CE

Localization CHS


Table 22 C10LE Chinese Traditional (b5) Build Details

Title Description

Platform(s) C10LE

Version WTOS 7.1

Build Number 33

Build File Name C10_wnos.b5


MD5 D5AB355098A4667EFBD32B88212054E8

Checksum32 276BA0DF

Localization CHT

Table 23 C10LE Japanese (jp) Build Details

Title Description

Platform(s) C10LE

Version WTOS 7.1

Build Number 33

Build File Name C10_wnos.jp


MD5 DD57F0E6C8A8D4281084950A8821E5D7

Checksum32 26143D9B

Localization JP

48 Chapter 3

R10L

Table 24 R10L English (us) Build Details

Title Description

Platform(s) R10L

Version WTOS 7.1

Build Number 33

Build File Name R10_wnos


MD5 BD5A8C7D5D8EA353ED589C0007ACC3D4

Checksum32 25B59B9B

Localization US

Table 25 R10L Chinese Simplified (gb) Build Details

Title Description

Platform(s) R10L

Version WTOS 7.1

Build Number 33

Build File Name R10_wnos.gb


MD5 36F700D2551FC91F118E0E2FD6B567BD

Checksum32 250D21BE

Localization CHS


Table 26 R10L Chinese Traditional (b5) Build Details

Title Description

Platform(s) R10L

Version WTOS 7.1

Build Number 33

Build File Name R10_wnos.b5


MD5 6368712BE6E4C9DF521083DBED887542

Checksum32 25F72ACB

Localization CHT

Table 27 R10L Japanese (jp) Build Details

Title Description

Platform(s) R10L

Version WTOS 7.1

Build Number 33

Build File Name R10_wnos.jp


MD5 81EE27A6AAF7B77713BE1A442A9134F3

Checksum32 249CC58B

Localization JP

50 Chapter 3

S10

Table 28 S10 English (us) Build Details

Title Description

Platform(s) S10

Version WTOS 7.1

Build Number 33

Build File Name RCA_wnos


MD5 5E9E6CC4FB47906B66E8F5EBA8BB183F

Checksum32 14EFCE37

Localization US

Table 29 S10 Chinese Simplified (gb) Build Details

Title Description

Platform(s) S10

Version WTOS 7.1

Build Number 33

Build File Name RCA_wnos.gb


MD5 18EE3E10BEA9EE4D00C653434FE182FC

Checksum32 1339CFEC

Localization CHS


Table 30 S10 Chinese Traditional (b5) Build Details

Title Description

Platform(s) S10

Version WTOS 7.1

Build Number 33

Build File Name RCA_wnos.b5


MD5 0572FEE29B5BED03A721F767BC49471F

Checksum32 13F0E421

Localization CHT

Table 31 S10 Japanese (jp) Build Details

Title Description

Platform(s) S10

Version WTOS 7.1

Build Number 33

Build File Name RCA_wnos.jp


MD5 FEB18D5853EAFF7EA593F4279723F9BC

Checksum32 125EEAAD

Localization JP

52 Chapter 3

V10LE

Table 32 V10LE English (us) Build Details

Title Description

Platform(s) V10LE

Version WTOS 7.1

Build Number 33

Build File Name VL10_wnos


MD5 1770C3BE02F58F91A6B7704435A676CE

Checksum32 24E9B94A

Localization US

Table 33 V10LE Chinese Simplified (gb) Build Details

Title Description

Platform(s) V10LE

Version WTOS 7.1

Build Number 33

Build File Name VL10_wnos.gb


MD5 F324F24942F2BF704EF80739DEE9E48F

Checksum32 2441822A

Localization CHS


Table 34 V10LE Chinese Traditional (b5) Build Details

Title Description

Platform(s) V10LE

Version WTOS 7.1

Build Number 33

Build File Name VL10_wnos.b5


MD5 E5B08BA4ED154F7A7648EA33DDE20581

Checksum32 2532C9F0

Localization CHT

Table 35 V10LE Japanese (jp) Build Details

Title Description

Platform(s) V10LE

Version WTOS 7.1

Build Number 33

Build File Name VL10_wnos.jp


MD5 0063865E61FD1353E7500D6DAA7BC52C

Checksum32 23DF917D

Localization JP

54 Chapter 3

BIOS Details

C10LE

R10L

S10

Table 36 C10LE BIOS Details

Title Description

Platform C10LE

Version 1.0B

Build File Name DEVEL35M.ROM


MD5 Check sum 07BA2F7594898FACCB26EDEBBE5387CE

Checksum32 A4678A3

Table 37 R10L BIOS Details

Title Description

Platform R10L

Version 1.0H_SPC

Build File Name FLASHABL.ROM


MD5 Check sum 08154CED6D7799E2D1E6259CBAD71979

Checksum32 95309FC

Table 38 S10 BIOS Details

Title Description

Platform R00LX

Version 1.16

Build File Name Xpress.rom

Size (Bytes) 262144

MD5 Check sum 31D2C9317FD76660841A1618D70E88A7

Checksum32 16C0FD3


V10LE

Table 39 V10LE BIOS Details

Title Description

Platform V10LE

Version 1.19

Build File Name 60480119.BIN

Size (Bytes) 524288

MD5 Check sum 542143D791505EC406F727221C425F10

Checksum32 4E42900

56 Chapter 3

Supported PlatformsThis section contains:• "Software Compatibility"• "Supported Codecs"• "Tested Peripherals"


• WDM 4.8.5 with hotfix HF04085016811 installed• Wyse TCX Suite 4.1.0.19

Supported Codecs




Video • WMV7, WMV8, WMV9• H264• VDPAU decoder


Tested Peripherals



Analog Earphone • KBoss SB-40• Logitech Clearchat (PN 981-000027)

Keyboard/Mouse • BenQ BE800 wireless keyboard/mouse (S/N KEK7800803039 - S/N MOK7800803309)

• Cherry keyboard (G83-6105IRNFR-2/05)• Logitech EX100 wireless keyboard/mouse (P/N 820-002657 - P/N

810-001806)• Logitech MK520 Wireless keyboard/mouse (P/N 820-002864 - P/



7619804075138 - P/N X800472-114)• Microsoft Laser desktop 6000+mouse (S/N 7796700513657 - P/N

X803468-014)• Microsoft wireless keyboard/mouse 4000 P/N X811684-004 - P/N

X806443-004)• Microsoft wireless keyboard/mouse 5000 (S/N 0200800501627 -

P/N X820594-003)• Microsoft Wireless Optical Mouse 2000 (P/N X821682-001)• Wyse Keyboard PS/2 • Wyse USB keyboard

Mobile HD • BENQ external DVD-ROM• Maxtor Basics External Portable Hard Drive 250G• Pioneer external DVD-ROM • USB Disk• YDstar external DVD-ROM

Monitor • Acer V233Hbd (1920 x 1080)• Dell 1704FPT• Dell 2001FP• Dell 2007FPb• Dell 2408WFPb• ELO entuitive (Touch Screen) (E993101)• Hanns.G Hi221D• MicroTouch 3M• Philip 240PW9 (1920x1200)• SAMSUNG SyncMaster T220+• ViewSonic VP2030b• ViewSonic VP2365WB• ViewSonic VX2433wm (1920 x 1080)

58 Chapter 3

Printer • Epson LQ_20K• HP Color LaserJet CM1312MFP (CC430A)• HP Laser Jet P2035 (CE461A)• HP Laser Jet P2055D• HP LaserJet 6L• OKIPOS® 425D Series Dual-Roll Multi-Task• Xerox Phaser 6130 (Validated as Local printer) (HAT044231E/

100S12604)

USB Earphone • AONI USB-526MV• LG-NORTEL Deskphone IP8501• Logitech A-00015 G330• Logitech A-0356A• Logitech G330 (PN 881-000065)• Logitech S-150• Logitech USB Handsets• Logitech USB Wireless Handsets• Microsoft LifeChat LX-300 USB earphone• Plantronics Audio 625 USB (PN 76810-01)• Plantronics BLACKWIRE C420• Plantronics BLACKWIRE C610• Plantronics BLACKWIRE C620 • Plantronics D100 Wireless• Plantronics DA40• Plantronics DA45• Plantronics P420 Speakerphone• Plantronics P820• Plantronics PLT USB Adapter 02• POLYCOM Deskphone CX200• SONIC EV-87

USB Hub • I-ball USB 4-port hub

USB Pen Drive • Kingston DataTraveler 2 GB• Lenovo 4 GB• SanDisk Cruzer Micro 1 GB (P/N SDCZ6-1024-A10)• SanDisk Cruzer Micro USB 2.0 Flash Drive 1G• SanDisk Cruzer Micro USB 2.0 Flash Drive 2G

USB Webcam • Logitech USB Webcam 9000• Logitech C310 (P/N 860-000259)• Microsoft LifeCam 3.0 Cinema (P/N X821404-001)




Supported Resolutions

TipAll resolutions support 16-bit and 32-bit color depth.

• 640 x 480• 800 x 600• 852 x 480 (S10 only)• 1024 x 768• 1152 x 864 (S10 not supported) • 1280 x 720 (S10 not supported)• 1280 x 768 (S10 not supported)• 1280 x 1024• 1360 x 768• 1366 x 768• 1368 x 768 (S10 not supported)• 1400 x 1050• 1440 x 900• 1600 x 900• 1600 x 1200• 1680 x 1050• 1920 x 1080 (S10 not supported)• 1920 x 1200 (S10 not supported)• 1920 x 1440 (R10L only)• 2560 x 1600 (R10L only)

USB-to-Parallel Converter

• MCT USB-to-Parallel converter 1284

USB-to-Serial Converter

• MCT USB-to-Serial converter U232-P9

Wireless • Linksys WAP4410N (S/N-ASK08J501497)• Wyse VT6656 USB 802.12 b/g Wireless LAN Network Adapter

(920300-51L)



60 Chapter 3

This page intentionally blank.

Tables1 VMware View Security Error Handling Results 42 New and Modified INI Parameters/Options (defaults in bold) 53 C10LE English (us) Build Details 144 R10L English (us) Build Details 145 S10 English (us) RCA_wnos Build Details 146 S10 English (us) RCA_boot Build Details 157 T10 English (us) Build Details 158 V10LE English (us) Build Details 159 Supported Codecs 1610 Tested Peripherals 1711 New and Modified INI Parameters/Options (defaults in bold) 2112 T10 English (us) Build Details 2313 T10 Japanese (jp) Build Details 2314 Supported Codecs 2415 Tested Peripherals 2516 Hardware Acceleration Details 2617 Device and Redirection Method 3118 Wireless IEEE 802.11n 3419 New and Modified INI Parameters/Options (defaults in bold) 3820 C10LE English (us) Build Details 4621 C10LE Chinese Simplified (gb) Build Details 4622 C10LE Chinese Traditional (b5) Build Details 4723 C10LE Japanese (jp) Build Details 4724 R10L English (us) Build Details 4825 R10L Chinese Simplified (gb) Build Details 4826 R10L Chinese Traditional (b5) Build Details 4927 R10L Japanese (jp) Build Details 4928 S10 English (us) Build Details 5029 S10 Chinese Simplified (gb) Build Details 5030 S10 Chinese Traditional (b5) Build Details 5131 S10 Japanese (jp) Build Details 5132 V10LE English (us) Build Details 5233 V10LE Chinese Simplified (gb) Build Details 5234 V10LE Chinese Traditional (b5) Build Details 5335 V10LE Japanese (jp) Build Details 5336 C10LE BIOS Details 5437 R10L BIOS Details 5438 S10 BIOS Details 5439 V10LE BIOS Details 5540 Supported Codecs 5641 Tested Peripherals 57

Release Notes Wyse ThinOSTM Issue: 042012

Written and published by: Wyse Technology Inc., April 2012

Created using FrameMaker® and Acrobat®

rn wyse thinos 7-1-122 gr

Documents

hkeylocalmachinesoftwarecitrixspeedscreen

devicecmos

devicecmos

serial converter

smart card

md5 checksum32

modified ini

page intentionally