robotics-a beginner's guide
DESCRIPTION
A powerpoint presentation for beginners in roboticsTRANSCRIPT
www.robotix.in
www.robotix.in
The word robotics is used to collectively define a field in engineering that covers the mimicking of various human characteristics
Sound concepts in many engineering disciplines is needed for working in this particular field
It finds it’s uses in all aspects of our life
www.robotix.in
An automatic industrial machine replacing the human in hazardous work
An automatic mobile sweeper machine at a modern home
An automatic toy car for a child to play with
A machine removing mines in a war field all by itself and many more…
www.robotix.in
Here we are aiming at design and prototyping of mobile robots capable of controlled locomotion.
It may be via human or automatic control.
Here we aim to make a bot capable of traversing a white line on a black surface automatically.
It must be able to perform certain tasks we set for it.
The task must be achieved within some given limitations.
Keeping this as the basic idea we will be able to further widen our applications
www.robotix.in
Locomotion system
Power supply system
Actuators
Sensory devices for feedback
Sensor Data processing unit
Control system
www.robotix.in
As the name suggests a mobile robot must have a system to make it move
This system gives our machine the ability to move forward, backward and take turns
It may also provide for climbing up and down
www.robotix.in
A simple equation: Power is the product of Torque and Angular velocity
P = ζ X ω
This implies that if we want more torque (pulling capacity) from the same motor we may have to sacrifice speed and vice versa
www.robotix.in
The dc motors (tape motors) available have very high speed of rotation which is generally not needed. But what they lack is torque output
For reduction in speed and increase in pulling capacity we use pulley or gear systems
These are governed by: ω1 X r1 = ω2 X r2
The above concept will be discussed shortly
www.robotix.in
They convert the electrical energy into meaningful mechanical work
Mechanical output can be rotational or linear (straight line)
Motors provide rotational motion
Electromagnets provide linear motion
www.robotix.in
AC Motors : Not used much in robotics
DC Motors : Finds extensive general use
Stepper Motors : For controlled rotation
Servo Motors : For controlled rotation
www.robotix.in
As the name suggests, a motor which uses a DC (Direct Current) power
Can run in both directions
Speed Controllable
Direction of rotation controlled by polarity of current / voltage
Speed of rotation controlled by average energy (power) fed to the motor
www.robotix.in
The motors we use in making differential drive are simple DC motors.
www.robotix.in
Direction of rotation controlled by polarity of current / voltage
Speed of rotation controlled by average energy (power) fed to the motor
www.robotix.in
Operating Voltage : Recommended voltage for powering the motor
Operating Current : Current drawn at a certain load on the shaft
Stall Current : Maximum current drawn, when motor not allowed to rotate
Stall Torque : Rotation force needed to hold the motor in stall condition
www.robotix.in
Free running torque & current are ideally zero
Increased load implies, increased torque, current drawn & power consumption
Power supplied by a motor is the product of output shaft’s rotational velocity & torque
DC Motors are high–speed, low-torque devices
Using gears, the high speed of the motor is traded off into torque
www.robotix.in
Zero speed at maximum load (stall torque)
Highest speed while free running (zero load)
Highest power at half speed & half load
www.robotix.in
This is the car type drive and the most common in real world but not in robot world as in automobiles.
The translation and rotation are independent of each other. But translation and rotation are interlinked hence this system faces severe path planning problem
www.robotix.in
A close relative of the differential drive system
It is mostly used in tracked machines e.g. tanks. Also finds application in some four / six wheeled robots
The left and right wheels are driven independently
Steering is accomplished by actuating each side at a different rate or in a different direction, causing the wheels or tracks to slip, or skid, on the ground
www.robotix.in
www.robotix.in
In this mechanism the machine chassis (body) is deformed to achieve rotation in contrast to the steering wheels in car type drive
www.robotix.in
It is made up of a system of motors. One set of which drive the wheels and the other set turns the wheels in a synchronous fashion
www.robotix.in
The most unique type of Locomotion system
It is composed of a four wheeled chassis and a platform that can be raised or lowered
www.robotix.in
A differential drive is the most basic drive, which consists of two sets of wheels that can be driven independently.
By using different movements of
the right and left wheels it is possible to make the robot
move forward, backwards,
right, left and even for “zero degree” turns.
www.robotix.in
Simplicity and ease of use makes it the most preferred system by beginners
Independent drives makes it difficult for straight line motion. The differences in motors and frictional profile of the two wheels cause them to move with slight turning effect
The above drawback must be countered with appropriate feedback system. Suitable for human controlled remote robots
www.robotix.in
www.robotix.in
Our power supply consists of the rectifier circuit and the transformer.
The transformer is used to step down voltage from
220 volt AC to 12 volt AC( or any other desired value).
Further the rectifier converts 12v AC to 12v DC supply.
www.robotix.in
A transformer is a device that transfers electrical
energy from one circuit to another through inductively coupled conductors.
To make a simple differential drive, a simple
transformer with following specifications can be used:
1 Amp, C.T. ‐12 V.( it steps down a 220V AC to 12 V AC.
www.robotix.in
220 V AC supply
12V AC
-12V AC
www.robotix.in
A rectifier is an electrical device that converts alternating current (AC), current that periodically reverses direction, to direct current (DC), current that flows in only one direction.
www.robotix.in
www.robotix.in
www.robotix.in
www.robotix.in
Electrolytic Capacitor
Integrated circuit (IC 78XX)
p side
n side
1N4001 pn junction diode
+
-
www.robotix.in
Most electrolytic capacitors are polarized, i.e., they have a positive and negative terminal. Connecting them to wrong terminals of power supply can destroy it. Adding to this, these capacitors are used only for DC voltages.
Fig: A blown capacitor
www.robotix.in
These ICs are voltage regulator integrated circuits. The voltage regulator IC maintains the output voltage at a constant value. The xx in 78xx indicates the fixed output voltage it is designed to provide. 7805 provides +5V regulated power supply. Similarly there are several other ICs available in this category like 7806, 7809, 7812, 7815.
www.robotix.in
Another fact to note about this series of ICs is that they have a voltage range in which they work. For any voltage above that range the IC goes into a thermal shutdown and will give you a very low arbitrary voltage value. For example, the 7805 IC has a range between 5V and 16V.
www.robotix.in
These are current amplifying circuits
A low current control signal is converted into a proportionally higher current signal that can drive the motor
Power Transistors can switch high currents. The ICmax is usually of the order of Amps as compared to small signal transistors which have ICmax in mA
www.robotix.in
H – Bridge Circuit Diagram
S1
S3
S2
S4
M1 2
VCC
www.robotix.in
www.robotix.in
L293D – Pin Diagram
www.robotix.in
It is an electronic circuit which enables a voltage to be applied across a load in either direction.
It allows a circuit full control over a standard electric DC motor. That is, with an H-bridge, a microcontroller, logic chip, or remote control can electronically command the motor to go forward, reverse, brake, and coast.
www.robotix.in
H-bridges are available as integrated circuits, or can be built from discrete components.
The term "H-bridge" is derived from the typical graphical representation of such a circuit, which is built with four switches, either solid-state (eg, L293/ L298) or mechanical (eg, relays).
www.robotix.in
The current provided by the MCU is of the order of 5mA and that required by a motor is ~500mA. Hence, motor can’t be controlled directly by MCU and we need an interface between the MCU and the motor.
A Motor Driver IC like L293D or L298 is used for this purpose which has two H-bridge drivers. Hence, each IC can drive two motors
www.robotix.in
Note that a motor driver does not amplify the current; it only acts as a switch (An H bridge is nothing but 4 switches).
www.robotix.in
Analogous to human sensory organs
Eyes, ears, nose, tongue, skin
Sensors help the robot knowing its surroundings better
Improves its actions and decision making ability
Provides feedback control
www.robotix.in
Made of cadmium sulphide
Resistance between two terminals vary depending on the intensity of light
Can be used to differentiate contrast colours
www.robotix.in
www.robotix.in
LM339, LM393 and LM311
They consist of more than one comparator.
LM311 consists of single comparator
www.robotix.in
www.robotix.in
www.robotix.in
www.robotix.in
Light Sensing Module using LED-LDR combination
www.robotix.in
A line follower is a robot capable of tracking a line drawn on a surface
Optical sensors capture the line position at the front end of the robot
The robot is steered to keep it always over the line
www.robotix.in
www.robotix.in
All the sensors are assigned
some weight such as
Sensor 1 = a1 = 3
Sensor 2 = a2 = 2
Sensor 3 = a3 = 1
Sensor 4 = a4 = -1
Sensor 5 = a5 = -2
Sensor 6 = a6 = -3
www.robotix.in
Robosoccer is the in house event of Robotix where teams of three make differential drive robots and participate in a one-on-one football match.
www.robotix.in
The chassis (and the wheels) can simply be cut out
from the toy‐cars easily available in the market by
separating the lower part of the car from the upper one and removing the gear box from it.
For more details, please refer to the link:
http://www.youtube.com/watch?v=kFoGBIqIqoM
HAPPY BOT MAKING!!!
THANK YOU