rockingham county drinking water clinic interpretation meeting cristin sprenger and amber vallotton...
TRANSCRIPT
Rockingham CountyDrinking Water Clinic
Interpretation Meeting
Cristin Sprenger and Amber VallottonVirginia Cooperative Extension
Erin Ling and Brian BenhamVirginia Tech Biological Systems Engineering, Virginia Cooperative Extension
Private Water Supplies in VirginiaPrivate Water Supplies in Virginia1.7 million Virginians rely on wells, springs or
cisterns (22% of the population)
In the U.S. municipal water supplies are regulated by the EPA under the Safe Drinking Water Act; private supplies are not!
Homeowners relying on private water supplies:◦ Are responsible for all aspects of water system management
◦ May lack knowledge and resources to effectively manage
◦ Usually don’t worry about maintenance until problems arise
Groundwater is a shared resource – our actions can affect others’ water supplies too!
2
How does water move to my well?How does water move to my well?(Bedrock/drilled well)(Bedrock/drilled well)
3
In a bedrock well, groundwater moves through fractures, or cracks in the bedrock
Water can come from many different directions, depths, and sources into one well
It can take water hours, days, or years to move through to bedrock
Well casing extends through loose “overburden” and into the bedrock, where an “open” borehole continues underground
Water can come from any fractures that intersect the open borehole
Proper well location and constructionProper well location and constructionAt least 50-100’ and upslope from contamination sources
Not in an area that receives runoff
Ground slopes away from well
Well casing at least 12” above ground
Grout seal around casing (have checked by a well driller)
Sanitary well cap (drilled well) or sealed concrete cover (bored well)
4
12”
Pho
to c
redi
ts:
SA
IF W
ater
Wel
ls ;
Pen
n S
tate
Uni
vers
ity
12”
The Finished Product – Drilled WellThe Finished Product – Drilled Well
5http://www.omafra.gov.on.ca/english/environment/06-117.htm
Grout sealGrout seal
Sealed, sanitary well capSealed, sanitary well cap
Casing extending >12” above ground surface
Casing extending >12” above ground surface
Ground sloping away from casing
Ground sloping away from casing
Well Maintenance TipsWell Maintenance TipsDo not use fertilizers, pesticides, oil, or paint near well
Keep area around well clean and accessible
Keep careful records ◦ original contract, water test results and any
maintenance or repair information
Every year:◦ Conduct thorough visual inspection of well
◦ Check cap for cracks, wear and tear, tightness
Every 1-3 years have well inspected by a qualified professional (with WWSP classification)
6
Private Water Supply RegulationsPrivate Water Supply Regulations
7
• Virginia Private Well Regulationso Specify application, inspection and
construction requirements
o No requirements for maintenance or water testing after construction of well –
responsibility of the owner!
• EPA National Drinking Water Standards
o Apply to PUBLIC systems
o Primary (health) and Secondary (nuisance)
o Can be used as guidance for private systems to know “how much is too much”
EPA Drinking Water StandardsEPA Drinking Water Standards
Primary Standards• Also called Maximum
Contaminant Level (MCL)
• Cause health problems
• Enforced for public systems
• Over 80 contaminants
• For example: o Nitrate
o Lead
o Coliform
o Most organic chemicals and pesticides
Secondary Standards Also called SMCL or RMCL
Cause aesthetic problems:o Staining
o Taste
o Odor
Can naturally occur in ground water
About 15, including:o Iron
o Sulfate
o Manganese
8
Testing water qualityTesting water qualityWhy test?
◦ Protect family’s health and safety
◦ Many contaminants undetectable by human senses
◦ Preventive measures often more effective and less expensive
◦ Legal protection
When to test?◦ Routine tests every 1-3 years
◦ Pregnant woman or infant in the home
◦ Recurring gastrointestinal illness
◦ Change in taste, appearance, odor of water
◦ Any services or repairs are done
9
What should I test for?What should I test for?
Every year test for coliform bacteria◦ Simple, relatively inexpensive test
◦ Indicates possible contamination from human or animal waste
Every three years test:◦ pH (secondary std: 6.5 – 8.5)
◦ Total Dissolved Solids (TDS; secondary std 500 mg/L)
◦ Other contaminants based on local land uses nearby and condition of water
10
Understanding test resultsUnderstanding test resultsMost results provided as concentrations:
◦mg/L (milligrams per liter) ≈ ppm (parts per million)
◦ µg/L = (micrograms per liter) ≈ ppb (parts per billion)
Other units unique to test
◦Hardness, pH
Compare to EPA standards: http://www.epa.gov/safewater/contaminants/index.html
11
How much? How much? 4 drops of ink in a 55 gallon barrel of water results in an“ink concentration”of 1 mg/L or ppm!
Household water quality is complex!Household water quality is complex!
12Photo credits: Penn State Univ., http://www.banthebagspdx.com/?p=283, USGS; http://www.clker.com/clipart-puzzle-pieces-2.html; http://levahnbros.wordpress.com/2009/12/01/copper-pipe-leak/; http://www.pubs.ext.vt.edu/442/442-670/442-670.html
Local land usesSurface activities
HydrogeologyWell locationWell constructionWell maintenance
Water TreatmentPlumbing
13
Sources of potential contaminants or issues of concern
pH/corrosivity hardnessnitrate
fluoride
TDSiron
manganese sulfatechloride
sodium
Surface water contamination: nitrate, bacteria
Source may be plumbing materials or existing water treatment device:sodiumcopperleadbacteria
Some are found in groundwater naturally, either due to human activities on or below ground:
well
Where a contaminant comes from affects how
we can deal with it!
arsenic
Options for problem waterOptions for problem water1. If possible, control the source of pollution
◦ Divert runoff, maintain septic system
2. Improve maintenance of water system◦ Install sanitary well cap, slope the ground
3. Treat the water to reduce contaminant concentration◦ Match the treatment option to the pollutant
◦ Consult a professional
4. Develop a new source of water◦ Deeper well, develop spring, connect to public
water
14http://static.howstuffworks.com/gif/septic-tank-cleaning-1.jpg, http://www.shipewelldrilling.com/Pictures/well_drilling_rig.jpg, http://www.clearflow.ca/REVERSE_OSMOSIS2.jpg
Treatment ConsiderationsTreatment Considerations Be sure to explore ALL of your options
Always have water tested by a certified lab
Look for National Sanitation Foundation (NSF) and Water Quality Association (WQA) certifications, consult Better Business Bureau (BBB)
Point of Use (POU) vs. Point of Entry (POE)
If it sounds too good to be true, it is! E.g., magnets
Weigh benefits and limitations of a device:◦ Cost
◦ Maintenance requirements
◦ Warranty
15
Rockingham Questionnaire Results (n=81)Rockingham Questionnaire Results (n=81)
Problems experienced with water % reporting
Staining of fixtures, appliances, laundry 32.1
Presence of particles 13.6
Objectionable odor 8.6
Unpleasant taste 4.9
Unnatural color or appearance 7.4
Corrosion of pipes and plumbing fixtures 4.9
16
Sources of potential contamination % reporting
Stream (< 100’) 6.2
Septic (< 100’) 4.9
Oil Tank (<100’) 4.9
Field crop operation (< 1/2 mile) 64.2
Major farm animal operation (< 1/2 mile) 67.9
SAMPLE Test ReportSAMPLE Test Report
17
TestHousehold
Water SampleMaximum Recommended
Level or RangeIron (mg/L) ND 0.3Manganese (mg/L) 0.073** 0.05Hardness (mg/L) 44.7 180Sulfate (mg/L) 1.2 250Fluoride (mg/L ND 2Total Dissolved Solids (mg/L) 84.5 500pH 5.8** 6.5 to 8.5Sodium (mg/L) 8.1 20Nitrate-N (mg/L) ND 10Total Coliform Bacteria Present** AbsentE. Coli Bacteria Absent AbsentFirst Draw Data:
Arsenic (mg/L) ND 0.01Copper (mg/L) 1.1** 1.3
Lead (mg/L) 0.007 0.015Flush Data:
Arsenic (mg/L) ND 0.01Copper (mg/L) ND 1.3
Lead (mg/L) ND 0.015
** = exceeds recommended
level
** = exceeds recommended
level
ND = not detected by instrument;
may be expressed as
>0.001
ND = not detected by instrument;
may be expressed as
>0.001
2013 Rockingham Results (n=81)
Test Std Ave Max/Extreme% Exceeding
Std
Iron (mg/L) 0.3 0.04 0.42 2.5
Manganese (mg/L) 0.05 0.005 0.27 2.5
Hardness (mg/L) 180 138.2 393 39.5
Sulfate (mg/L) 250 13.1 74 0
Fluoride (mg/L) 2.0/4.0 0.17 1.8 0
Total Dissolved Solids (mg/L) 500 379 1057 17.3
pH 6.5 to 8.5 7.35.2 3.7 (<6.5)
8.3 0 (>8.5)
Sodium (mg/L) 20 69.3 294.7 44.4
Nitrate-N (mg/L) 10 3.25 13.79 4.9
Total Coliform Bacteria ABSENT -- -- 51.9(present)
E. Coli Bacteria ABSENT -- -- 7.4(present)
18
2013 Rockingham Results (n=81)
Test Std Ave Max/Extreme% Exceeding
Std
Copper (mg/L) – First Draw1.0/1.3
0.23 6.80 1.2
Copper (mg/L) – Flushed 0.021 0.39 0
Arsenic (mg/L) – First Draw0.010
ND ND 0
Arsenic (mg/L) – Flushed ND ND 0
Lead (mg/L) – First Draw0.015
0.006 0.14 8.6
Lead (mg/L) – Flushed ND 0.006 0
19
Coliform BacteriaColiform BacteriaCannot be smelled, tasted or seenColiform bacteria is an indicator
organism – means disease-causing bacteria may be present
Public standard is 0 colony forming units (cfu)/100 mL (ABSENT)
If present, test for fecal coliform or E. coli presence – indicator that sewage or animal waste is present.
20
Pho
to c
redi
ts:
ww
w.w
ater
-res
earc
h.ne
t, w
ww
.brit
anni
ca.c
om
If Coliform Bacteria are PRESENTIf Coliform Bacteria are PRESENTDon’t panic!Examine well for pathways surface water can
enter well (cracks in casing), make sure sanitary well cap is installed and secure, ground slopes away from well, etc.
Consider shock chlorinationRetest after shock chlorinationLong term treatment options: ozonation, UV
light, continuous chlorination
21
If If E. Coli E. Coli Bacteria are PRESENTBacteria are PRESENTTake immediate steps to addressShock chlorinateRetest waterIn the meantime, consider boiling or use
another source of water for drinking or cooking
Check for potential contamination sourcesConsider long-term treatment options: UV
light, ozonation, continuous disinfection
22
htt
p://
ww
w.k
imic
on
tro
l.co
m/m
icro
org
/esc
her
ich
ia_c
oli.
jpg
pHpH Measure of the
acidity or alkalinity of a substance (0 – 14) scale
Logarithmic scale: pH = 5 is 100 times more acidic than pH = 7
Good indicator of general water quality
23
12
3
4
5
6
7
0
8
9
10
12
11
14
13
Increasing acidity
Increasing alkalinity
Neutral
Lemon juice
Vinegar
Recommended pH range 6.5 – 8.5
Milk
Battery acid
Ammonia
Milk of magnesia
Baking sodaSea water
Lye
Distilled water
Coffee
Bleach
Gastric acid
Corrosive WaterCorrosive Water Also called aggressive water Corrodes metal plumbing – can leach metals, causes pitting
and leaks, reduces length of appliance life Most commonly caused by low pH; other contributing factors
include alkalinity, temperature, TDS levels EPA recommends drinking water be non-corrosive Excess copper or lead in drinking water is a health concern Depending on pH, treat with acid neutralizing filter or
soda ash injection
24http://www.bushman.cc/photos/Copper_Water_Pipe_Corrosion.jpg; http://www.cee.vt.edu/ewr/environmental/teach/wtprimer/corrosion/corrosion.html
Corrosive Water: Metals of concernCorrosive Water: Metals of concern Lead
◦ Many serious health effects, especially in children and infants
Developmental, neurological, reproductive and renal
◦ EPA MCL is 0 mg/L with a health action level of 0.015 mg/L.
◦ Sources include: Pipes in older homes (pre-1930)
Solder in homes built prior to 1986
“Lead-free” brass fixtures (<8%) – even in NEW homes!
Copper
◦ High levels can cause nausea, vomiting, stomach cramps; infants and children particularly sensitive
◦ EPA MCL is 1.3 mg/L
◦ Nuisance effects noticeable at 1.0 mg/L
25http://www.gravitaexim.com/images/Lead-pipe.jpg
Addressing Lead or Copper in WaterAddressing Lead or Copper in Water Options to consider:
◦ Discuss test results with your physician if concerned!
◦ Metals will be highest with corrosive water and contact time with
pipes. Flushing pipes may address problem. Make sure that water
runs until it is as cold as it gets before drinking
◦ Activated carbon filter (e.g. Brita) MAKE SURE IT IS LABELED TO REMOVE LEAD
MAKE SURE TO CHANGE AS DIRECTED
◦ Address corrosivity of water – if pH < 6.5, can use acid neutralizing
filter; however, corrosivity can be caused by other factors as well
◦ Reverse Osmosis
◦ Use another source of water known to be safe
26
Nitrate (NONitrate (NO33-N)-N)
Serious health concern for infants
◦ Methemoglobinemia or “blue baby syndrome”
Nitrate nitrite during digestion and blood cannot carry oxygen
◦ MCL 10 mg/L NO3-N or 45 mg/L of NO3
If 3-5 mg/L, use do not use water for infants under 6 months
Sources include fertilizer, animal manure, sewage
NO3 dissolves and moves easily through soil
Test in spring months; levels change over time
BOILING INCREASES concentration of nitrates!!!
Treatment: distillation, reverse osmosis, ion exchange
27
http
://w
i.wat
er.u
sgs.
gov/
pubs
/FS
-221
-95/
p2.g
if
Hardness/ScalingHardness/Scaling
Hardness Rating Grains per Gallon mg/L
Soft Less than 1.0 Less than 17.1
Slightly-Moderately Hard 1.0-7.0 17.1-120
Hard 7.0-10.5 120-180
Very Hard Over 10.5 Over 180
ww
w.g
oodc
lean
wat
er.c
om/f
yi.h
tm;
ww
w.w
ater
soft
enin
g.or
g/ef
fect
s_of
_har
d_w
ater
.htm
;
28
Hard water contains high levels of calcium and magnesium ions
◦ Dissolved into water during contact with limestone and other minerals
Not a health risk – nuisance
◦ Decreased cleaning action of soaps, detergents
◦ Scale build-up in pipes and on appliances
◦ Reduced efficiency and lifespan of water heaters
No EPA standard for public systems
Treat using water softener
SodiumSodium Low levels occur naturally; high levels may be
from man-made source
◦ Road salt storage or application
◦ Industrial waste
◦ Sewage, fertilizers or animal waste
◦ WATER SOFTENER
Sodium: EPA recommendation for people on low-sodium diets: 20 mg/L
Consider other sources of salt in diet and discuss with Dr.
Higher levels may indicate contamination – test for bacteria or other contaminants
Salty taste; and may accelerate corrosion of pipes and water heaters
Treat using distillation, reverse osmosis, demineralization
29
/ww
w.c
otrip
.org
/win
terd
rivin
g/im
ages
/pic
6.jp
g; /
ww
w.a
psw
ater
.com
/imag
es/f
leck
%20
5600
.jpg
Total Dissolved Solids (TDS)Total Dissolved Solids (TDS) Water is a great solvent – dissolves many compounds as
it travels over and under ground
TDS is a measure of all dissolved impurities
Natural sources: limestone, salt deposits, other minerals
Man-made sources:
◦ Septic systems and sewage
◦ Run off from agricultural or urban land
◦ Road salt, industrial sources
General indicator of water quality; test at least every three years
EPA SMCL is 500 mg/L
Treat using distillation or reverse osmosis
30http://en.wikipedia.org/wiki/Total_dissolved_solids
Iron and ManganeseIron and Manganese Nuisance - not health concern
SMCL: Iron = 0.3 mg/L; Mn = 0.05 mg/L
Red-brown/black staining, particles, metallic taste
Treatment depends on type/form of iron
◦ Ferrous: water initially clear orange-brown or black solid particles
◦ Ferric: solid particles apparent immediately, or water has a tint
◦ Iron bacteria: not a health concern; feed on Fe and Mn, forming red-brown or black-brown slime
Treatment: water softener, aeration and filtration, ozonation, distillation
31
http
://w
ww
.fre
edrin
king
wat
er.c
om/im
ages
-wat
er-q
ualit
y/ch
emic
als/
wat
er%
20in
%20
redd
ish-
brow
n.jp
g
Virginia Master Well Owner Network Virginia Master Well Owner Network Training WorkshopTraining Workshop
Want to learn more about
your private water supply?
Visit www.wellwater.bse.vt.edu
TRAINING WORKSHOPS TO BE HELD IN 2014
Contact Erin Ling
540-231-9058
32
Help Others!
Free
Resource
Binder!
Learn
more
about your
water!
Apply
today!
33
Cristin Sprenger ([email protected])Amber Vallotton ([email protected])
Virginia Household Water Quality ProgramVirginia Master Well Owner Network
Erin Ling ([email protected]) Brian Benham ([email protected])
www.wellwater.bse.vt.eduEmail: [email protected]
Ph: 540-231-9058
ResourcesResources Virginia Household Water Quality Program www.wellwater.bse.vt.edu
Virginia Certified Lab Listing: http://www.wellwater.bse.vt.edu/files/Labslist2013.pdf
EPA Private Wells Site http://www.epa.gov/ogwdw/privatewells/whatyoucando.html
National Groundwater Association Well Owner http://www.wellowner.org/
Water Systems Council Wellcare Hotline http://www.wellcarehotline.org/
National Sanitation Foundation: www.nsf.org
Water Quality Association: www.wqa.org
Consumer Reports or Better Business Bureau www.consumerreports.org OR www.bbb.org
34
End of slide show. Additional slides follow End of slide show. Additional slides follow if you wish to add them.if you wish to add them.
35
ArsenicArsenicOccurs naturally in some rocks; more common in
groundwater supplies when water tables rise and fall frequently
Used in wood preservatives, paints, pesticides, etc.
Linked to many types of cancer, stomach pain, paralysis, and blindness
EPA primary standard is 0.010 mg/L
Reverse osmosis to remove
36
FluorideFluoride Occurs naturally in varying levels
◦ Naturally high levels of F in E. Virginia groundwater
Added to many public water systems for reduced dental caries and strong teeth and bones
Health concerns: ◦ Long term exposure: links to bone cancer
◦ Shorter term exposure: dental or skeletal fluorosis
EPA MCL 4.0 mg/L and SMCL 2.0 mg/L
Optimum levels for public systems 0.8 - 1.2 mg/L
Limited use for children up to 8 years
Treatment (reverse osmosis) removes ALL fluoride
37http://www.willamettedental.com/en_us/ALL/patients/pps/retailproducts_prettysmile.gif; http://en.wikipedia.org/wiki/Dental_fluorosis
Treatment OptionsTreatment OptionsPrimary Problem Treatment Method Notes
Corrosive water, copper, lead, leaks
Acid neutralization Uses limestone chips or soda ash to increase water pH and hardness to prevent corrosion
Arsenic, fluoride Activated alumina Water pH must be less than 8.5 Pretreatment with oxidation may be necessary to achieve good arsenic removal
Hydrogen sulfide, methane, volatile organics, radon
Aeration Expensive and susceptible to cogging by other pollutants but very effective when multiple gases are present
Sulfate, nitrate, arsenic Anion exchange Increases chloride concentration in treated water. May make water more corrosive.
Chlorine, pesticides, herbicides, radon, miscellaneous tastes and odors, volatile organics
Carbon filter Disinfection should be used on water supplies with bacterial contamination because bacteria can multiply in filter. Carbon must be replaced periodically.
38Adapted from Tips for Buying Water Treatment Equipment by Stephanie Clemens and Bryan Swistock, Penn State University
Treatment OptionsTreatment OptionsPrimary Problem Treatment Method Notes
Bacteria, iron and manganese
Chlorination Water must be clear for chlorine to work. Requires tank for storage and contact time.
Removes everything except volatile organics, pesticides, herbicides
Distillation Produces small amounts of bland-tasting water. Space needed to store treated water.
Iron, manganese, hydrogen sulfide
Oxidizing filters Periodic addition of chemicals and backwashing is necessary. Good option when all three are present.
Bacteria, metals, odors, tastes
Ozone Expensive to purchase and operate but very effective at removing multiple pollutants.
All dissolved pollutants Reverse osmosis Produces small amounts of water and some waste water. Will not remove most organic pollutants or bacteria
39Adapted from Tips for Buying Water Treatment Equipment by Stephanie Clemens and Bryan Swistock, Penn State University
Treatment OptionsTreatment OptionsPrimary Problem Treatment Method Notes
Soil, sand, other particles Sediment filter Must be routinely changed or backwashed
Removes scale or hardness and limited amounts of dissolved iron and manganese
Softener Causes increase in water sodium level. Water may become more corrosive after softening.
Bacteria Ultraviolet light Water must be free of sediment to kill bacteria effectively. Change bulb annually.
40Adapted from Tips for Buying Water Treatment Equipment by Stephanie Clemens and Bryan Swistock, Penn State University