roger rangel - faculty.sites.uci.edu · roger rangel university of california, irvine irvine, ca...

Roger RangelUniversity of California, Irvine

Irvine, CA 92697-3975Mechanical and Aerospace Engineering

(949) 824-4033Department Phone: (949) 824-5406

Fax: (949) 824-8585Email: [email protected]

Website: http://http://www.eng.uci.edu/rangel/rhr.html

Education

PhD, University of California, Berkeley, 1985.Mechanical EngineeringAdvisor: Fernandez-Pello, C.

MS, University of California, Berkeley, 1983.Major: Mechanical Engineering

Mechanical Engineer, Simón Bolívar University, 1981.Major: Mechanical EngineeringAdvisor: Campo, A.

Professional Positions

Department Chairperson, Mechanical and Aerospace Engineering, (July 1, 2005 - June 30,2009).

Professor, Mechanical and Aerospace Engineering, UC Irvine (1997-Present).Professor, Chemical Engineering and Materials Science, UC Irvine (1997-2009).Associate Professor, Chemical Engineering and Materials Science, UC Irvine (1995-1997).Associate Professor, Mechanical and Aerospace Engineering, UC Irvine (1993-1997).Assistant Professor, Mechanical and Aerospace Engineering, UC Irvine (1989-1993).Lecturer, Mechanical and Aerospace Engineering, UC Irvine (1988-1989).Assistant Professional Research, Mechanical and Aerospace Engineering, UC Irvine (1987-

1989).Assistant Specialist, Mechanical and Aerospace Engineering, UC Irvine (1985-1987).Visiting Professor, Dept of Chemical Engng and Metallurgy University of Barcelona. (April 2000 -

July 2000).Visiting Professor, Dept of Chemical Engng and Metallurgy University of Barcelona. (April 1999 -

July 1999).Visiting Scientist, Istituto di Ricerche sulla Combustione-CNR University of Naples. (September

1991 - December 1991).Instructor, Professional Development Program University of California, Berkeley. (January 1984 -

July 1985).Research Assistant, Combustion Laboratory University of California, Berkeley. (June 1982 - July

1985).

Research Interests

Fluid mechanics and heat transfer of dispersed multiphase flows and interfacial flows including,fuel-spray heat transfer, vaporization, and combustion; metal spray deposition andsolidification in materials processing; fluid interface instability and atomization; droplet andparticle dynamics in viscous flows; computational fluid dynamics; and applied mathematics.

Roger Rangel

October 30, 2014 of 27

Professional Memberships

American Institute of Aeronautics and Astronautics.American Society of Mechanical Engineers.The Combustion Institute.Society of Rheology. (2007 - 2008).

Awards and Honors

Teaching Excellence Award, Division of Undergraduate Education-UCI. (April 24, 2014).Narcis Monturiol Medal to Scientific and Technologic Merit, Catalan Department of Universities

and Research. (2006).Generalitat de Catalunya International Fellowship. (2000).American Institute of Aeronautics and Astronautics, AIAA. (1999).

Best Paper Award in Microgravity ScienceGeneralitat de Catalunya International Fellowship. (1999).Consiglio Nazionale delle Ricerche International Fellowship. (1991).Organization of American States Fellowship. (1985).U.C. Berkeley's Arthur Gould Tasheira Fellowship. (1983).Gran Mariscal de Ayacucho Scholarship. (1981).

RESEARCH

Publications

Book Chapters, Peer-Reviewed

BC-3. Rangel, R., Sirignano, W. A., Dunn-Rankin, D., Orme, M. (1996). Generation, Vaporization, andCombustion of Droplet Arrays and Streams. In K. K. Kuo (Ed.), Recent Advances in SprayCombustion. 14. Vol. 166. (pp. 327-380). AIAA Progress in Astronautics and Aeronautics.

BC-2. Rangel, R. (1992). Heat Transfer in Vortically-Enhanced Mixing of Vaporizing Droplet Sprays. In C.L. Tien (Ed.), Annual Review of Heat Transfer IV. 7. (pp. 331-362). Hemisphere Publishing Company.

BC-1. Rangel, R., Sirignano, W. A. (1991). Spray Combustion in Idealized Configurations: Parallel DropletStreams. In E. S. Oran, J. P. Boris (Eds.), Numerical Approaches to Combustion Modeling. 19. Vol.135. (pp. 585-613). AIAA Progress in Astronautics and Aeronautics.

Book Sections

BC-4. Ardekani, A., Rangel, R., Joseph, D. D. (2007). Motion of a sphere normal to a wall in a second-order fluid (Same content as JA-63). In Joseph, D. D., Funada, T., Wang, J., 20.15. CambridgeUniversity Press. 978-0-521-87337-6.

Conference/Workshop/Symposium Proceedings, Other

OC-56. Ardekani, A. M., Dabiri, S., Rangel, R. (2009). Deformation of a droplet in a particulate shear flow.Southern California Symposium on Flow Physics.

OC-55. Casadevall, X., Lambert, R. A., Rangel, R., Madou, M. J. (2008). In Au/PPY actuators for activemicromixing and mass transport enhancement. 12th International Conferenceon MiniaturizedSystems for Chemistry and Life Sciences, San Diego, CA. (Paper M12A).

Roger Rangel


OC-53. Ardekani, A. M., Dabiri, S., Rangel, R. (2007). Modified DLM method for finite-volume simulation ofparticle flow. In Modified DLM method for finite-volume simulation of particle flow. 45th AIAAAerospace Sciences Meeting, Reno, Nevada. Paper No. AIAA 2007.

OC-54. Ardekani, A. M., Rangel, R., Joseph, D. D. (2007). Particle-particle and particle-wall interactions in asecond-order fluid. APS.

OC-52. Ardekani, A. M., Rangel, R. (2006). In Distributed-Lagrange-Multiplier-based computational methodfor particulate flow with collissions. APS.

OC-51. Lambert, R. A., Rangel, R. (2006). Motion of a circular particle in wall-driven flow at low Reynoldsnumbers. 44th AIAA Aerospace Sciences Meeting, Reno, Nevada. Paper No. AIAA 2006-296.

OC-50. Lambert, R. A., Chakraborty, S., Madou, M. J., Rangel, R. (2006). Moving Flap Model for Fast DNAHybridization in Microchannel Flow. California-Catalonia Alliance for Miniaturization Science andEngineering, Barcelona, Spain. MNE-2006. Paper No. 3.

OC-49. Kim, J., Kido, H., Rangel, R., Madou, M. J. (2005). A Centrifuge-based Flow Switching Valve.Nanotech - The 9th Annual European Conference on Micro & Nanoscale Technologies for theBiosciences, Poster Session, Montreaux, Switzerland.

OC-48. Terry, D., Rangel, R. A Jet Exhaust Model for Soot Dispersion and Visibility. In 2005 IEEEAerospace Conference Proceedings. Big Sky, Montana. Paper 9.0102.

OC-47. Rangel, R., L’Esperance, D., Trolinger, J. D., Coimbra, C. F. M (2004). Particle Response to LowReynolds number Oscillation of a Fluid in Microgravity. 42nd AIAA Aerospace Sciences Meeting,Reno, Nevada. Paper No. AIAA 2004-1147.

OC-46. Trolinger, J., L'Esperance, D., Rangel, R., Coimbra, C., Witherow, W., Bodiford, M., Patterson, W.(2003). Ground Based and Mock-Up Experiments to Support the ISS Flight Definition ProgramSHIVA. In Proceedings of the 2003 IEEE Aerospace Conference. Big Sky MT.

OC-45. Trolinger, J., L'Esperance, D., Rangel, R., Coimbra, C., Witherow, W., Rogers, J., Lal, R. (2002).Small Particle Response To Fluid Motion Using Tethered Particles To Simulate Microgravity.Microgravity Materials Science Conference, Huntsville Alabama.

OC-44. Coimbra, C. F. M, Rangel, R., Trolinger, J. D., L'Esperance, D. (2001). Ground Experiments forSHIVA - Supporting Theory and Experiments for the Spaceflight. Conference and Exhibit on theInternational Space Station, Paper No. 6962.

OC-43. Rangel, R., Trolinger, J. D., Coimbra, C. F. M, Castillo, J., Torres, C. (2001). Studies OfFundamental Particle Dynamics In Microgravity. Microgravity Transport Processes in Fluid, Thermal,Biological and Materials Sciences II, Banff, Alberta, Canada. Paper MTP-01-32.

OC-42. Rangel, R., Trolinger, J. D., Coimbra, C. F. M, Witherow, W., Rogers, J. (2001). Hybrid OpticalDiagnostics of Particles and Crystal Growth in Fluid in Space. In W. Osten, W. Juptner (Eds.), 4thInternational Workshop on Automatic Processing of Fringe Patterns. Fringe 2001, Bremen,Germany. Elsevier.

OC-41. Rangel, R., Torres, C. R., Castillo, J. E. (2001). Stratified Fluid over a Descending Sphere Close to aRigid Wall. 2001 SIAM Annual Meeting, San Diego, California. (Abstract only).

Roger Rangel


OC-40. Rangel, R., Torres, C. R., Castillo, J. E. (2001). Numerical Study of Stratified Flow past a SphereInside a Cylinder. In LACAFLUM. V Latin American and Caribbean Congress on Fluid Mechanics,Caracas, Venezuela. Paper No. DHT-6.

OC-39. Rangel, R., Coimbra, C. F. M, Trolinger, J. D., Witherow, W. (2001). The Science behind SHIVA:Spaceflight Holography Investigation in a Virtual Apparatus. 39th AIAA Aerospace SciencesMeeting, Reno, Nevada. Paper No. AIAA 2001-0927.

OC-38. Rangel, R., Ahmed, A. H., Sobolev, V. V., Guilemany, J. M. (2000). Modelización de la Oxidación enVuelo de Partículas Metálicas durante la Proyección Térmica (Modeling of in-flight oxidation ofmetallic particles in thermal spraying). In Ciencia y Tecnología de los Materiales. IBEROMET VI,(pp. 379-386). Barcelona.

OC-37. Rangel, R., Trolinger, J. D., Lal, R. B., Coimbra, C. F. M, Witherow, W., Rogers, J. (2000). SpaceHolography Investigation in a Virtual Apparatus. In The Materials Science Conference. NASA MSFC,Huntsville, Alabama.

OC-36. Rangel, R., Coimbra, C. F. M (1999). Spherical Particle Motion in Unsteady Viscous Flows. 37thAIAA Aerospace Sciences Meeting, Reno, Nevada. Paper No. AIAA 99-1031. (Best Paper Award).

OC-35. Rangel, R., Delplanque, J. P. (1997). Analytical and Numerical Modeling of Liquid-Metal DropletImpact, Spreading and Solidification. First International Symposium on Applied Plasma Science, LosAngeles, California.

OC-34. Rangel, R., Leiroz, A. J. K (1996). Transient Interaction Effects During Droplet Stream Combustionat Zero Reynolds Number. Fall Meeting of the Western States Section of the Combustion Institute,Tempe, Arizona. Paper 96S-019.

OC-33. Rangel, R., Trolinger, J. D., Lal, R. B. (1996). Particle Mechanics and G-Jitter Observations in theIML-1 Spaceflight. 34th AIAA Aerospace Sciences Meeting, Reno, Nevada. Paper No. AIAA 96-0504.

OC-32. Rangel, R., Sirignano, W. A., Dunn-Rankin, D., Orme, M. E. (1994). Droplet Arrays and Streams.IUTAM Symposium on Mechanics and Combustion of Droplets and Sprays, Tainan, Taiwan.(Keynote Lecture).

OC-31. Rangel, R., Liu, H., Lavernia, E. J. (1994). Modeling of Molten Droplet Impingement on a Non-FlatSurface. ASME Winter Annual Meeting, Multiphase Flow and Heat Transfer in Materials Processing,Chicago, Illinois. Book Number G00914.

OC-30. Rangel, R., Leiroz, A. J. K (1994). Numerical Study of Droplet Stream Vaporization. Second UCISymposium in Advanced Computing. (Abstract Only).

OC-29. Rangel, R., Trolinger, J. D., Lal, R. B. (1993). Methodologies for the Micro-Mechanics ofMicrospheres in a Fluid in Microgravity. Proceedings of the 11th International Symposium on theUnification of Analytical, Computational and Experimental Solution Methodologies inMicromechanics and Microsystems, (pp. 517-534). Danvers, Massachusetts. (Ch. 37).

OC-28. Rangel, R., Dang, A. L., Navaz, H. K. (1992). Numerical Analysis of Bipropellant Combustion inLiquid Thrust Chambers by an Eulerian-Eulerian Approach. AIAA/SAE/ASME/ASEE 28th JointPropulsion Conference and Exhibit, Nashville, Tennessee. Paper No. AIAA 92-3735.

Roger Rangel


OC-27. Rangel, R., Lage, P. L. C (1992). On the Role of Internal Radiation Absorption in Single DropletVaporization. 30th AIAA Aerospace Sciences Meeting, Reno, Nevada. Paper No. 92-0106.

OC-26. Rangel, R. (1991). Numerical Computations of Droplet Vaporiation including Radiation AbsorptionEffects. SIAM 4th International Conference on Numerical Combustion, St. Petersburg, Florida.(Abstract Only).

OC-25. Rangel, R., DiStefano, E., Cady, E. C. (1991). Fill of Screen Liquid Acquisition Devices in LowGravity using a Thermodynamic Vent System Heat Exchanger. AIAA/NASA/OAI Conference onAdvanced SEI Technologies, Cleveland, Ohio. Paper No. 91-3540.

OC-24. Rangel, R., Hess, C. F. (1990). Nonlinear Spacial Instability of a Fluid Sheet. 28th AIAA AerospaceSciences Meeting, Reno, Nevada. Paper No. 90-0118.

OC-23. Rangel, R., Campo, A. (1989). Influence of Axial Wall Conduction on the Heat Removal Capabilitiesof Circumferential Finned Pipes. Tenth Brazilian Congress of Mechanical Engineering, (pp. 293-296). Rio de Janeiro, Brazil.

OC-22. Rangel, R., Delplanque, J. P. (1989). Thermal Expansion Effects on the Behavior of Vaporizing FuelDroplet Streams. Fall Meeting of the Western States Section of the Combustion Institute, Livermore,California. Paper 89-63.

OC-21. Rangel, R., Nguyen, Q. V., Dunn-Rankin, D. (1989). Measurement and Prediction of Trajectories forVaporizing Droplet Pairs. Fall Meeting of the Western States Section of the Combustion Institute,Livermore, California. Paper 89-62.

OC-20. Rangel, R., Delplanque, J. P., Megaridis, C. M., Sirignano, W. A. (1989). Modelling of Vaporization-Controlled Incineration of Hazardous Liquid Wastes. First International Congress on ToxicCombustion Byproducts: Formation and Control, Los Angeles, California. (Abstract Only).

OC-19. Rangel, R., Sirignano, W. A. (1989). PDF Analysis of Molecular Mixing in Turbulent Flows. SIAM1989 Annual Meeting, San Diego, California. (Abstract Only).

OC-18. Rangel, R., Sirignano, W. A. (1989). A Computational Fluid Dynamics Approach to Jet-BlastAtomization Studies. 3rd ILASS-AMERICAS Annual Conference on Liquid Atomization and SpraySystems, Irvine, California.

OC-16. Rangel, R., Miralles-Wilhelm, F., Sirignano, W. A. (1989). An Analysis of Molecular Mixing in aVortical Structure: Bias in the PDF Measurement. 27th AIAA Aerospace Sciences Meeting, Reno,Nevada. Paper No. 89-0482.

OC-15. Rangel, R., Sirignano, W. A. (1989). The Dynamics of Vortex Pairing and Merging. 27th AIAAAerospace Sciences Meeting, Reno, Nevada. Paper No. 89-0128.

OC-14. Rangel, R., Sirignano, W. A. (1988). An Evaluation of the Point Source Approximation in SprayCalculations. Fall Meeting of the Western States Section of the Combustion Institute, Dana Point,California. Paper 88-95.

OC-13. Rangel, R., Sirignano, W. A. (1988). Unsteady Flame Propagation in a Two-dimensional Spray withTransient Droplet Vaporization. 26th AIAA Aerospace Sciences Meeting, Reno, Nevada. Paper No.88-0641.

Roger Rangel


OC-12. Rangel, R., Sirignano, W. A. (1987). Two-dimensional Modeling of Flame Propagation in FuelStream Arrangements. Spring Meeting of the Western States Section of the Combustion Institute,Provo, Utah. Paper No. 87-48.

OC-11. Rangel, R., Sirignano, W. A. (1987). Atomization of Liquid Fuels: Nonlinear Growth of Disturbancesat an Interface. Spring Meeting of the Western States Section of the Combustion Institute, Provo,Utah. Paper No. 87-43.

OC-10. Rangel, R., Sirignano, W. A. (1987). Vaporization Ignition and Combustion of Two Parallel FuelDroplet Streams. In Proceedings of the Second ASME-JSME Thermal Engineering JointConference. Vol. 1, (pp. 27-34). Honolulu, Hawaii.

OC-9. Rangel, R., Sirignano, W. A. (1986). Rapid Vaporization and Heating of Two Parallel DropletStreams. Spring Meeting of the Canadian and Western States Sections of the Combustion Institute,Banff, Canada. Paper No. 86-22.

OC-7. Campo, A., Lacoa, U., Morales, J., Rangel, R. (1985). In The Method of Lines as a Teaching Aid inInternal Forced Convection. ASEE Annual Conference, Atlanta, Georgia. (Poster session "InnovativeIdeas in Action").

OC-8. Rangel, R., Fernandez-Pello, A. C. (1985). Convective Ignition of a Flat Combustible Surface. In FallMeeting of the Western States Section of the Combustion Institute. Davis, California. Paper No. 85-43.

OC-7. Rangel, R., Campo, A., Lacoa, U., Morales, J. (1985). The Method of Lines as a Teaching Aid inInternal Forced Convection. In Innovative Ideas in Action. ASEE Annual Conference, Atlanta,Georgia. (Poster session).

OC-3. Campo, A., Chow, L., Rangel, R. (1984). In Analysis of Coupled Conductive-Covective Problems.International Conference on Numerical Methods for Transient and Coupled Problems, Venice, Italy.

OC-4. Fernandez-Pello, A. C., Trevino, C., Rangel, R. (1984). In Mixed-Convective Film Boiling from aHorizontal Cylinder. Proceeding of the Tenth Congress of the National Engineering Academy, (pp.242-247). Ciudad Obregon, Mexico.

OC-5. Fernandez-Pello, A. C., Rangel, R. (1984). In Mixed-Convective Droplet Combustion with InternalCirculation. Spring Meeting of the Western States Section of the Combustion Institute, Boulder,Colorado.

OC-6. Fernandez-Pello, A. C., Rangel, R. (1984). In An Analysis of Gas-Phase Ignition by a CatalyticCylindrical Surface. Fall Meeting of the Western States Section of the Combustion Institute, (pp. 84-83). Stanford, California. (Also presented at Jonadas sobre Combustion en Motores Termicos,Universidad Politecnica de Madrid).

OC-6. Rangel, R., Fernandez-Pello, A. C. (1984). An Analysis of Gas-Phase Ignition by a CatalyticCylindrical Surface. Fall Meeting of the Western States Section of the Combustion Institute,Stanford, California. Paper 84-83. (Also presented at Jornadas sobre Combustion en MotoresTermicos, Universidad Politecnica de Madrid, 1984).

OC-5. Rangel, R., Fernandez-Pello, A. C. (1984). Mixed-Convective Droplet Combustion with InternalCirculation. Spring Meeting of the Western States Section of the Combustion Institute, Boulder,Colorado.

Roger Rangel


OC-4. Rangel, R., Fernandez-Pello, A. C., Trevino, C. (1984). Mixed-Convective Film Boiling from aHorizontal Cylinder. Proceedings of the Tenth Congress of the National Engineering Academy, (pp.242-247). Ciudad Obregon, Mexico.

OC-3. Rangel, R., Campo, A., Chow, L. (1984). Analysis of Coupled Conductive-Convective Problems.International Conference on Numerical Methods for Transient and Coupled Problems, Venice, Italy.

OC-2. Rangel, R., Campo, A., Jarrin, A. (1982). Prediction of the Bulk Temperature of a Forced ConvectiveFlow in a Heating Section. First Latin American Congress of Heat and Mass Transfer, Buenos Aires,Argentina.

OC-1. Rangel, R., Ortiz, M., Campo, A. (1981). Pseudo Bond-Graph Modeling of the Graetz Problem and its Comparison with Finite-Difference Approach. Second National Symposium on NumericalMethods in Heat Transfer, Maryland.

Conference/Workshop/Symposium Proceedings, Peer-Reviewed

CP-29. Trolinger, J. D., L'Esperance, D., Rangel, R., Coimbra, C., Witherow, W. (2004). Design andpreparation of a particle dynamics space flight experiment. In S. Sadhal (Ed.), Proceedings of theMicrogravity Transport Processes in Fluid, Thermal, Biological and Materials Sciences III. SHIVA,ECI: MTP-03-86, Vol. 1027, (pp. 550-567). Annals of the New York Academy of Sciences.

CP-28. Rangel, R., Ahmed, A. M., Sobolev, V. V., Guilemany, J. M. (2000). Mathematical Model of In-FlightOxidation of Metallic Particles in Thermal Spraying. In C. C. Berndt (Ed.), Proceedings of theInternational Thermal Spray Conference. ITSC-2000, (pp. 187-193). Montreal, Canada. ASMInternational, Materials Park, OH.

CP-27. Rangel, R., Coimbra, C. F. M (1998). Unsteady Heat Transfer in a Dilute Suspension of SmallParticles. In Proceedings of the 7th Brazilian Thermal Sciences Meeting. VII Encit, Vol. 2, (pp. 983-988).

CP-26. Rangel, R., Coimbra, C. F. M (1998). Fractional Calculus Solution of the Particle MomentumEquation in Unsteady Stokes Flows. In Proceedings of the 7th Brazilian Thermal Sciences Meeting.VII Encit, Vol. 2, (pp. 997-982).

CP-25. Rangel, R., Dai, S., Delplanque, J. P., Lavernia, E. J. (1998). Modeling of Reactive SprayAtomization and Deposition. In 15th International Thermal Spray Conference. ASM International,Vol. 1, (pp. 341-346). Nice, France.

CP-24. Rangel, R., Coimbra, C. F. M, Edwards, D. K. (1997). Particle Temperature Response to TransientThermal Perturbations in a Dilute Suspension Including Radiation Heat Transfer. In Symposium onDispersed Flows in Combustion, Incineration and Propulsion Systems. 1997 ASME IMECE, Vol.352, (pp. 187-197).

CP-23. Rangel, R., Bian, X., Delplanque, J. P. (1997). Droplet Deposition: Comparison of Models, NumericalSimulations, and Experimental Data. In Symposium on Manufacturing and Materials Processing.1997 ASME National Heat Transfer Conference, Vol. 347.

CP-22. Rangel, R., Bian, X. (1996). A Metal-Droplet Deformation and Solidification Model with SubstrateRemelting. In Transport Phenomena in Materials Processing and Manufacturing. 1996 ASMEIMECE, Vol. 336, (pp. 265-273). (FED-Vol240).

Roger Rangel


CP-21. Rangel, R., Delplanque, J. P., Lavernia, E. J. (1996). Simulation of Micro-Pore Formation in SprayDeposition Processes. In Transport Phenomena in Materials Processing and Manufacturing. 1996ASME IMECE, Vol. 336, (pp. 275-282). (FED-Vol. 240).

CP-20. Rangel, R., Leiroz, A. J. K (1996). Interaction Effects during Droplet-Stream Combustion. In S. H.Chan (Ed.), Proceedings of the 8th International Symposium on Transport Phenomena inCombustion. Transport Phenomena in Combustion, Vol. 1, (pp. 826-837). Taylor and Francis.

CP-17. Rangel, R., Delplanque, J. P., Cai, W. D., Lavernia, E. J. (1996). Experimental and NumericalInvestigation of Porosity during Low Pressure Plasma Spraying of Tungsten. In Tungsten andRefractory Metals 3: Proceedings of the 1995 International Conference on Tungsten and RefractoryMetals, their Alloys, Composites and Carbides. Metal Powder Industries Federation.

CP-19. Rangel, R., Bian, X. (1995). Analytical and Numerical Studies of the Stagnation-Flow SolidificationProblem. In Fundamentals of Heat and Mass Transfer in Metals and Materials Processing. 1995ASME IMECE, Vol. 2. (HTD-Vol. 317-2).

CP-18. Rangel, R., Delplanque, J. P., Lavernia, E. J. (1995). Multi-Directional Solidification Model for theDescription of Micro-Pore Formation in Spray Deposition Processes. In Fundamentals of Heat andMass Transfer in Metals and Materials Processing. 1995 ASME IMECE, Vol. 2, (pp. 511-522). (HTD-Vol. 317-2).

CP-16. Rangel, R., Liu, H., Cai, W., Lavernia, E. J. (1995). Numerical and Experimental Study of PorosityEvolution during Plasma Spray Deposition of Tungsten. In M. A. Otooni (Ed.), Proceedings of the1994 NATO Workshop. Science and Technology of Rapid Solidification and Processing, (pp. 73-107). Kluwer Academic Publishers.

CP-15. Rangel, R., Lage, P. L. C, Hackenberg, C. M. (1994). Vaporization of Dilating Non-Ideal BinaryDroplets with Radiation Absorption. In Proceedings of the Fifth Brazilian Thermal Science Meeting.ENCIT, (pp. 509-512). Sao Paulo, Brazil. (Short version of JA-25).

CP-14. Rangel, R., Leiroz, A. J. K (1994). A Numerical Grid for Droplet-Stream Vaporization Problems. InProceedings of the Fifth Brazilian Thermal Science Meeting. ENCIT, (pp. 367-370). Sao Paulo,Brazil.

CP-13. Rangel, R., Liu, H., Lavernia, E. J. (1994). Numerical Investigation of Micro-Pore Formation duringSubstrate Impact of Molten Droplets in Spraying Processes. In Proceedings of the 1994 NationalThermal Spray Conference. Boston Massachusetts.

CP-12. Rangel, R., Liu, H., Lavernia, E. J. (1993). Deformation and Interaction Behavior of Molten DropletsImpinging on a Flat Surface in Plasma Spray Processes. In Proceedings of the 1993 NationalThermal Spray Conference. (pp. 457-462). Anaheim, California.

CP-11. Rangel, R., Lage, P. L. C (1992). Generalized Integral Transform Solution for Boundary Layer Flowover a Sphere. In Proceedings of the Fourth Brazilian Thermal Science Meeting. ENCIT, (pp. 294-296). Rio de Janeiro, Brazil.

CP-10. Rangel, R., Continillo, G. (1992). Theory of Vaporization and Ignition of a Droplet Cloud in the Fieldof a Vortex. Twenty Fourth Symposium (International) on Combustion, (pp. 1493-1501). TheCombustion Institute.

Roger Rangel


CP-9. Rangel, R., Lage, P. L. C (1991). Total Thermal Radiation Absorption Distribution inside a LiquidDroplet Irradiated by a Blackbody. In Heat and Mass Transfer in Fire and Combustion Systems.National Heat Transfer Conference, Vol. 166, (pp. 69-78).

CP-5. Rangel, R., Delplanque, J. P., Sirignano, W. A. (1991). Liquid Waste Incineration in a ParallelStream Configuration: Effect of Auxiliary Fuel. In Proceedings of the Eleventh InternationalColloquium on Dynamics of Explosions and Reactive Systems. Progress in Astronautics andAeronautics, Vol. 132, (pp. 164-186).

CP-8. Rangel, R. (1990). Spray Entrainment and Mixing in a Temporally-Growing Shear Layer. InSymposium on Heat and Mass Transfer in Fire and Combustion Systems. ASME Winter AnnualMeeting, (pp. 11-18).

CP-7. Rangel, R., Delplanque, J. P., Sirignano, W. A. (1990). Liquid Waste Incineration in a ParallelStream Configuration: Parametric Study. Twenty Third Symposium (International) on Combustion,(pp. 887-894). The Combustion Institute.

CP-6. Rangel, R. (1990). Vortical Mixing and Heat Transfer in Liquid Sprays. In Proceedings of the ThirdBrazilian Thermal Science Meeting. ENCIT, (pp. 547-552). Itapema, Brazil.

CP-4. Rangel, R., Sirignano, W. A. (1988). Unsteady Flame Propagation in a Two-Dimensional Spray withTransient Droplet Vaporization. In Twenty Second Symposium (International) on Combustion. (pp.1931-1939). The Combustion Institute.

CP-3. Rangel, R., Sirignano, W. A. (1988). Two-Dimensional Modeling of Flame Propagation in FuelStream Arrangements. In Proceedings of the Eleventh International Colloquium on Dynamics ofExplosions and Reactive Systems. Progress in Astronautics and Aeronautics, Vol. 113, (pp. 128-150). Warsaw, Poland.

CP-2. Rangel, R., Sirignano, W. A. (1986). Rapid Vaporization and Heating of Two Parallel Fuel DropletStreams. Twenty-first Symposium (International) on Combustion, (pp. 617-624). The CombustionInstitute.

CP-1. Rangel, R., Fernandez-Pello, A. C. (1986). Droplet Ignition in Mixed Convection. In Proceedings ofthe Tenth International Colloquium on Dynamics of Explosions and Reactive Systems. Progress inAstronautics and Aeronautics, Vol. 105, (pp. 239-252). Berkeley, California.

Journal Articles, Peer-Reviewed

JA-73. Lambert, R. A. (2011). Micro-Mixing and the Role of Multiple Rotating and Bending Flaps. I.J. TransPhenomena, 12(1-2), 133-145.

JA-72. Lambert, R. A., Rangel, R. (2010). The role of elastic flap deformation on fluid mixing in amicrochannel. Physics of Fluids, 22(5), 96-111.

JA-71. Ardekani, A. M., Dunn-Rankin, D., Joseph, D. D., Rangel, R. (2009). Particle-Wall Collision in aViscoelastic Fluid. Journal of Fluid Mechanics, 633, 475-483.

JA-70. Ardekani, A. M., Dabiri, S., Rangel, R. (2009). Collision of multi-particle and general shape objects ina viscous fluid. J. Computational Physics, 227, 10094-10107.

Roger Rangel


JA-69. Ardekani, A. M., Rangel, R., Joseph, D. D. (2009). Two spheres in a stream of a second-order fluid.Physics of Fluids, 20(6).

JA-65. Kim, J., Rangel, R., Kido, H., Madou, M. J. (2008). Passive flow switching valves on a centrifugalmicrofluidic platform. Sensors and Actuators, 182(2), 613-621.

JA-66. Ardekani, A. M., Rangel, R. (2008). Numerical investigation of particle-particle and particle-wallcollisions in a viscous fluid. J. Fluid Mech., 596, 436-466.

JA-67. Lambert, R. A., Das, S., Madou, M. J., Chakraborty, S., Rangel, R. (2008). Rapid MacromolecularSynthesis in Microfluidic Channels with Oscillating Flaps. Int. J. Heat Mass Transfer, 51(17-19),4367-4378.

JA-68. Wang, W., Lambert, R. A., Rangel, R. (2008). Parametric Study of Multi-SplatSolidification/Remelting including Contact-Resistance Effects. Int. J. Heat Mass Transfer, 51(19-20),4811-4819.

JA-63. Ardekani, A. M., Rangel, R., Joseph, D. (2007). Motion of a sphere normal to a wall in a second-order fluid. J. Fluid Mech., 587, 163-172.

JA-64. Leiroz, A.J. K., Rangel, R. (2007). Transient Gas Phase Interaction Effects During Droplet-StreamCombustion. J. of the Braz. Soc. of Mech. Sci. and Engr., 29(3), 329-336.

JA-62. Ardekani, A. M., Rangel, R. (2006). Unsteady motion of two solid spheres in Stokes flow. Physics ofFluids, 18. (co-author is my PhD student).

JA-61. Soler, J. M., Rangel, R. (2006). Geometrical Characterization of Canted Coil Springs. J. Mech.Engineering Science, 220(12), 1831-1842. (co-author was my MS student).

JA-60. Alabduljalil, S., Rangel, R. (2006). Inviscid instability of an unbounded shear layer: effect of surfacetension, density and velocity profile. J. Engineering Mathematics, 54(2), 99-118. (co-author was myPhD student).

JA-59. L’Esperance, D., Trolinger, J., Coimbra, C., Rangel, R. (2005). Particle Response to Low-Reynolds-Number Oscillation of a Fluid in Microgravity. AIAA J, 44(5), 1060-1064. (3rd co-author was my PhDstudent).

JA-58. L’Esperance, D., Coimbra, C., Trolinger, J., Rangel, R. (2005). Experimental verification of fractionalhistory effects on the viscous dynamics of small spherical particles. Exp. Fluids, 38(1), 112-116. (2ndco-author was my PhD student).

JA-57. Rangel, R., Coimbra, C., Lambert, R., L’Esperance, D., Trolinger, J. (2004). An experimental studyon stationary history effects in high-frequency Stokes flows. J. Fluid Mech, 504, 353-363.

JA-56. Rangel, R., Lambert, R. A. (2003). Solidification of a supercooled liquid in stagnation-point flow. Int.J. Heat Mass Transfer, 46(21), 4013-4021.

JA-55. Rangel, R., Lambert, R. A. (2002). Linear stability analysis of the solidification of a supercooled liquidin a half-space. Int. J. Heat Mass Transfer, 45(23), 4577-4587.

JA-54. Rangel, R., Ahmed, A. M. (2002). Metal Droplet Deposition on Non-flat Surfaces: effect of substratemorphology. Int. J. Heat Mass Transfer, 45, 1077-1091.

Roger Rangel


JA-53. Rangel, R., Ahmed, A. M., Sobolev, V. V., Guilemany, J. M. (2001). In-flight Oxidation of CompositePowder Particles during Thermal Spraying. Int. J. Heat Mass Transfer, 44(24), 4667-4677.

JA-52. Rangel, R., Coimbra, C. F. M (2001). Spherical Particle Motion in Harmonic Stokes Flows. AIAAJournal, 39(9), 1673-1682.

JA-51. Rangel, R., Terry, D., McGraw, R. (2001). Method of Moments Solutions for a Laminar-Flow AerosolReactor Model. Aerosol Science and Technology, 34, 353-362.

JA-50. Rangel, R., Chung, M. (2001). Parametric Study of Metal Droplet Deposition and SolidificationProcess Including Contact Resistance and Undercooling Effects. Int. J. Heat Mass Transfer, 44(3),605-618.

JA-49. Rangel, R., Coimbra, C. F. M (2000). Unsteady Heat Transfer in the Harmonic Heating of a DiluteSuspension of Small Particles. Int. J. Heat Mass Transfer, 43(18), 3305-3316.

JA-48. Rangel, R., Chung, M. (2000). Simulation of Metal Droplet Deposition with Solidification IncludingUndercooling and Contact Resistance Effects. Numerical Heat Transfer, 37(3), 201-226.

JA-47. Rangel, R., Delplanque, J. P., Lavernia, E. J. (2000). Analysis of In-flight Oxidation during ReactiveSpray Atomization and Deposition Processing of Aluminum. Journal of Heat Transfer, 122, 126-132.

JA-46. Rangel, R., Chung, M., Jung, P. S. (1999). Semi-analytical Solution for Heat Transfer from a BuriedPipe with Convection on the Exposed Surface. Int. J. Heat Mass Transfer, 42(20), 3771-3786.

JA-45. Rangel, R., Delplanque, J. P. (1999). Simulation of Liquid Jet Overflow in Droplet DepositionProcesses. Acta Materialia, 47(7), 2207-2213.

JA-44. Rangel, R., Delplanque, J. P. (1998). A Comparison of Models, Numerical Simulation, andExperimental Results in Droplet Deposition Processes. Acta Materialia, 46(14), 4925-4933.

JA-43. Rangel, R., Coimbra, C. F. M (1998). General Solution of the Particle Momentum Equation inUnsteady Stokes Flows. J. Fluid Mechanics, 370, 53-72.

JA-42. Rangel, R., Coimbra, C. F. M, Edwards, D. K. (1998). Heat Transfer in a Homogeneous SuspensionIncluding Radiation and History Effects. J. Thermophysics and Heat Transfer, 2(3), 304-312.

JA-41. Rangel, R., Bian, X. (1998). Undercooling and Contact Resistance in Stagnation-Flow Solidificationon a Semi-Infinite Substrate. Int. J. Heat Mass Transfer, 41(12), 1645-1653.

JA-40. Rangel, R., Delplanque, J. P., Dai, S., Lavernia, E. J. (1997). Reactive Spray Atomization andDeposition of Aluminum Alloys: Microstructure and Dispersoid Characterization. J. of MaterialsSynthesis and Processing, 5, 87-104.

JA-39. Rangel, R., Delplanque, J. P., Lavernia, E. J. (1997). Numerical Investigation of Multiphase Flowinduced Porosity Formation in Spray-Deposited Materials. International J. Non-Equil. Processing, 10,185-199.

JA-38. Rangel, R., Bian, X. (1997). Stagnation-Flow Solidification on a Finite-Thickness Substrate. Int. J.Heat Mass Transfer, 41(1), 244-247.

Roger Rangel


JA-37. Rangel, R., Delplanque, J. P., Cai, W. D., Lavernia, E. J. (1997). Spray Atomization and Depositionof Tantalum Alloys. Acta Materialia, 45(12), 5233-5243.

JA-36. Rangel, R., Bian, X. (1997). Metal Droplet Deposition Model including Liquid Deformation andSubstrate Remelting. Int. J. Heat Mass Transfer, 40(11), 2549-2564.

JA-35. Rangel, R., Delplanque, J. P. (1997). An Improved model for Droplet Solidification on a Flat Surface.J. of Materials Science, 32(6), 1519-1530.

JA-34. Rangel, R., Leiroz, A. J. K (1997). Flame and Droplet Interaction Effects during Droplet-StreamCombustion at Zero Reynolds Number. Combustion and Flame, 108(3), 287-301.

JA-33. Rangel, R., Zhang, Q., Lavernia, E. J. (1996). Nucleation Phenomena during Coinjection of CeramicParticulates into Atomized Metal Droplets. Acta Metall. Mater, 44(9), 3693-3707.

JA-32. Rangel, R., Bian, X. (1996). The Viscous Stagnation-Flow Solidification Problem. Int. J. Heat MassTransfer, 39(17), 3581-3594.

JA-31. Rangel, R., Delplanque, J. P., Lavernia, E. J. (1996). Multi-Directional Solidification Model for theDescription of Micro-Pore Formation in Spray Deposition Processes. Numerical Heat Transfer A, 30,1-18.

JA-29. Rangel, R., Bian, X. (1996). The Inviscid Stagnation-Flow Solidification Problem. Int. J. Heat MassTransfer, 39(8), 1591-1996.

JA-30. Rangel, R., Bian, X. (1995). Numerical Solution of the Inviscid Stagnation-Flow SolidificationProblem. Numerical Heat Transfer A, 28(5), 589-603.

JA-28. Rangel, R., Liu, H., Lavernia, E. J. (1995). An Analysis of Freeze-up Phenomena during GasAtomization of Metals. Int. J. Heat Mass Transfer, 38(12), 2183-2193.

JA-27. Rangel, R., Lage, P. L. C, Hackenberg, C. M. (1995). Non-ideal Vaporization of Dilating BinaryDroplets with Radiation Absorption. Combustion and Flame, 101, 36-44.

JA-26. Rangel, R., Liu, H., Lavernia, E. J. (1995). Modeling of Molten Droplet Impingement on a Non-flatSurface. Acta Metall. mater, 43(5), 2053-2072.

JA-25. Rangel, R., Leiroz, A. J. K (1995). Numerical Study of Droplet Stream Vaporization at Zero ReynoldsNumber. Numerical Heat Transfer A, 27, 273-296.

JA-24. Rangel, R., Liu, H., Lavernia, E. J. (1995). Modeling of Droplet-Gas Interactions in SprayAtomization of Ta-2.5W Alloy. Materials Science and Engineering A, 191, 171-184.

JA-23. Rangel, R., DiStefano, E., Cady, E. C. (1994). A Method of Filling Screen Liquid Acquisition Devicesin Low Gravity. Journal of Spacecraft and Rockets, 31(6), 1099-1106.

JA-22. Rangel, R., Liu, H., Lavernia, E. J. (1994). Modeling of Reactive Atomization and DepositionProcessing of Ni3Al. Acta Metall. mater, 42(10), 3277-3289.

JA-21. Rangel, R., Lage, P. L. C (1994). Generalized Integral Transform Solution for Boundary-Layer FlowOver a Sphere. Int. J. Numerical Methods in Fluids, 18(8), 721-731.

Roger Rangel


JA-20. Rangel, R., Liu, H., Lavernia, E. J. (1994). Numerical Investigation of Micro-Pore Formation duringSubstrate Impact of Molten Droplets in Plasma Spray Processes. Atomization and Sprays, 4, 369-384.

JA-18. Rangel, R., Liu, H., Lavernia, E. J. (1994). Numerical Simulation of Impingement of Molten Ti, Ni,and W Droplets on a Flat Substrate. J. Thermal Spray Technology, 2(4), 369-378.

JA-19. Rangel, R., Liu, H., Lavernia, E. J. (1993). Numerical Simulation of Substrate Impact and Freezing ofDroplets in Plasma Spray Processes. J. Applied Physics, 26, 1900-1908.

JA-17. Rangel, R., Lage, P. L. C, Hackenberg, C. M. (1993). Non-Ideal Vaporization of Dilating BinaryDroplets with Variable Properties. Int. J. Heat Mass Transfer, 36(15), 3731-3741.

JA-16. Rangel, R., San Marchi, C., Liu, H., Sickinger, A., Muehlberger, E., Lavernia, E. (1993). NumericalAnalysis of the Deformation and Solidification of a Single Droplet Impinging onto a Flat Substrate. J.Materials Science, 28, 3313-3321.

JA-15. Rangel, R., Lage, P. L. C, Hackenberg, C. M. (1993). Multicomponent Heat and Mass Transfer forFlow over Droplet. Int. J. Heat Mass Transfer, 36(14), 3573-3581.

JA-14. Rangel, R., Lage, P. L. C (1993). Single Droplet Vaporization Including Thermal RadiationAbsorption. J. Thermophysics and Heat Transfer, 7, 502-509.

JA-13. Rangel, R., Lage, P. L. C (1993). Total Thermal Radiation Absorption by a Single Spherical Droplet.J. Thermophysics and Heat Transfer, 7, 101-109.

JA-12. Rangel, R., Lavernia, E. J., Srivatsan, T. S. (1992). Atomization of Alloy Powders. Atomization andSprays, 3, 253-274.

JA-11. Rangel, R., Delplanque, J. P. (1991). Droplet-Stream Combustion in the Steady Boundary LayerNear a Wall. Combustion Science and Technology, 78, 97-115.

JA-10. Rangel, R., Sirignano, W. A. (1991). The Linear and Nonlinear Shear-Instability of a Fluid Sheet. ThePhysics of Fluids A, 3, 2392-2400.

JA-9. Rangel, R., Nguyen, Q. V., Dunn-Rankin, D. (1991). Measurement and Prediction of Trajectoriesand Collision of Droplets. Int. J. Multiphase Flow, 17, 159-177.

JA-8. Rangel, R. (1991). Heat Transfer Analysis of a Particle-Containing Channel Flow. Warme- undStoffubertragung, 26, 153-161.

JA-6. Rangel, R., Sirignano, W. A. (1989). Combustion of Parallel Droplet Streams. Combustion andFlame, 75, 241-254.

JA-7. Rangel, R., Sirignano, W. A. (1989). An Evaluation of the Point Source Approximation in SprayCalculations. Numerical Heat Transfer, 16, 37-57.

JA-4. Rangel, R., Sirignano, W. A. (1988). Nonlinear Growth of Kelvin-Helmholtz Instability: Effect ofSurface Tension and Density Ratio. The Physics of Fluids, 31, 1845-1855.

JA-5. Rangel, R., Fernandez-Pello, A. C., Treviño, C. (1988). Mixed-Convective Film Boiling around aCylinder. Latin American Applied Research, 18, 131-137.

Roger Rangel


JA-3. Rangel, R., Fernandez-Pello, A. C., Treviño, C. (1986). Gas-Phase Ignition of a PremixedCombustible by Catalytic and Non-Catalytic Cylindrical Surfaces. Combustion Science andTechnology, 48, 45-63.

JA-2. Rangel, R., Fernandez-Pello, A. C. (1984). Mixed-Convective Droplet Combustion with InternalCirculation. Combustion Science and Technology, 42, 47-66.

JA-1. Rangel, R., Campo, A. (1983). Lumped-System Analysis for the Simultaneous Wall and Fluid AxialConduction in Laminar Pipe-Flow Heat Transfer. Physico-Chemical Hydrodynamics, 4, 163-173.

Reprints

OW-3. Rangel, R., Buchberg, H., Catton, I., Elghobashi, S., Harnet, J., Knuth, E., Mills, A., Minkowycz, W.(1997). Professor Donald K. Edwards on his 65th Birthday. 41. (4 ed.). (pp. 663-664). Int. J. Heatand Mass Transfer.

OW-2. Rangel, R. (1997). The California-Catalunya Sister Agreement. 39. (pp. 8). Butlleti del Casal delsCatalans de California.

OW-1. Rangel, R. (1997). The Balsells Fellowship. Rangel, R., 38. (pp. 5). Butlleti del Casal dels Catalansde California.

Technical Reports

TR-15. Rangel, R., Lavernia, E. J. (1998). Heat Transfer and Solidification in Non-Equilibrium Droplet-BasedManufacturing of Composite Materials. Department of Mechanical and Aerospace Engineering,University of California, Irvine. (Annual Report (5/97 - 5/98) to NSF).

TR-14. Rangel, R. (1997). An Innovative Numerical Model for the Simulation of Advanced Droplet-BasedMaterials Processes. Mechanical and Aerospace Engineering, University of California, Irvine. (FY1997 Annual Report to Los Alamos National Laboratory (UCDRD)).

TR-13. Rangel, R., Lavernia, E. J., Delplanque, J. P. (1997). Direct Numerical Simulation and Modelling ofPorosity Formation in Spray Deposited Materials. Sulzer Metco, Inc. Department of ChemicalEngineering and Materials Science and Department of Mechanical and Aerospace Engineering,University of California, Irvine. (Annual Report (4/96 - 3/97)).

TR-12. Rangel, R., Trolinger, J. D., Weber, D. C., Gran, M. (1995). Results from Holographic Diagnosticsduring the IML-1 Spaceflight. MetroLaser, Inc. and Department of Mechanical and AerospaceEngineering, University of California, Irvine. (Final Technical Report to NASA Marshall Space FlightCenter under Contract NAS8-36634).

TR-11. Rangel, R., Ghanta, R. (1993). Investigation of Supersaturation, Particle Entrainment and Mixing inan Elliptical Jet. Department of Mechanical and Aerospace Engineering, University of California,Irvine. (Final Technical Report to Northrop Corp. under Task 3 of Contract HHH781470U).

TR-10. Rangel, R. (1992). Heat Transfer Analysis of Lighted Push-Button Switch. (Consultant Report toStaco Switch, Costa Mesa, California).

TR-9. Rangel, R., Dhadwal, A. S., Dunn-Rankin, D. (1991). Liquid Nitrogen Cooling of Crude Oil.Department of Mechanical and Aerospace Engineering, University of California Irvine.

Roger Rangel


TR-8. Rangel, R., Sirignano, W. A., Samuelsen, G. S., Chiang, J., Stapper, B. (1989). FundamentalStudies on Spray Combustion and Turbulent Combustion. Department of Mechanical Engineering,University of California, Irvine. (Final Technical Report to AFOSR on Grant No. 86-0016).

TR-7. Rangel, R., Sirignano, W. A., Megaridis, C. M. (1989). Study of Liquid Hydrogen and Liquid OxygenRocket Propellant Launch Hazards. University of Tokio. (Consultants Report to Professor ToshisukeHirano).

TR-6. Rangel, R., Sirignano, W. A., Samuelsen, G. S., Raju, M. S. (1988). Fundamental Studies on SprayCombustion and Turbulent Combustion. Department of Mechanical Engineering, University ofCalifornia, Irvine. (Annual Technical Report to AFOSR on Grant No. 86-0016).

TR-5. Rangel, R., Sirignano, W. A. (1987). Numerical Modeling of Interface Instability and Liquid SheetBreak-up. G.C. Marshall Space Flight Center. (JANNAF Workshop on Liquid Jet Atomization inRocket Combustion Chambers, Alabama).

TR-4. Rangel, R., Sirignano, W. A., Cetegen, B., Raju, M. S. (1986). Fundamental Studies on SprayCombustion and Turbulent Combustion. Department of Mechanical Engineering, University ofCalifornia, Irvine. (Annual Technical Report to AFOSR on Grant No. 86-0016).

TR-3. Rangel, R., Fernandez-Pello, A. C., Oppenheim, A. K. (1985). On The Ignition and Combustion ofFuel Droplets and the Ignition of Premixed Fuels by Cylindrical Surfaces. Lawrence BerkeleyLaboratory. Report No. LBL-20712. (Berkeley, California).

TR-2. Rangel, R., Fernandez-Pello, A. C., Oppenheim, A. K. (1985). Near- and Super-Critical DropletCombustion. Lawrence Berkeley Laboratory. Report No. LBL-20711. (Berkeley, California).

TR-1. Rangel, R., Campo, A. (1982). Some Models for Low Peclet Number Flow with Uniform HeatingDownstream. Department of Mechanical Engineering, Simon Bolivar University. (DepartmentalReport. Caracas, Venezuela).

Presentations Given

Rangel, R., "Special Topics in Viscous Flows," University of Benevento, Benevento, Italy. Aseries of lectures. (November 2012).

"Particle Interaction and Particle-Wall Collisions in Viscous and Viscoelastic Flows," San DiegoState University, Sand Diego, California. (April 30, 2010).

"Special Topics in Viscous Flows," University Federico II, Naples, Italy. (December 2009).

Rangel, R., "Micro-mixing and the Role of Multiple Rotating and Bending Flaps," University ofBenevento, Benevento, Italy. (December 10, 2009).

Rangel, R., "Particle Interactions and Collisions in Newtonian and Non-Newtonian Fluids,University of California, Riverside," Riverside, California. (October 2008).

Rangel, R., "Particle Interactions and Collisions in Newtonian and Non-Newtonian Fluids,Universita degli Studi di Napoli Federico Secondo," Naples, Italy. (June 2008).

Rangel, R., "Particle Interactions and Collisions in Newtonian and Non-Newtonian Fluids,Graduate University of the Chinese Academy of Sciences," Beijing, China. (May 2008).

Roger Rangel


Rangel, R., "Particle Interactions and Collisions in Newtonian and Non-Newtonian Fluids,Shanghai Jiaotong University," Shanghai, China. (May 2008).

Rangel, R., "Particle-particle and particle-wall interactions in Newtonian and viscoelastic fluids,"Aeronautical Engineering School, UPM, Madrid, Spain. (November 2007).

Rangel, R., "Fluid mechanics of single-phase and particle-laden flows with applications in micro-devices," Catalan Technical Society. (November 2006).

Rangel, R., "The California-Catalonia Alliance for Miniaturization Science and Engineering,"Autonomous University of Barcelona, Bellaterra, Barcelona, Spain. (October 2005).

Rangel, R. (Keynote Speaker), 4th Annual Engineering Congress of the ASME Chapter,"Oscillatory fluid mechanics and heat transfer of small particles in microgravity," SimonBolivar University, Caracas, Venezuela. (July 2005).

Rangel, R., "Oscillatory Motion of Particles in Micro-Gravity: understanding the history drag,"Monterrey Tec, Monterrey, Mexico. (February 2005).

Rangel, R., "Oscillatory Motion of Particles in Micro-Gravity: NASA Sponsored Flight DefinitionExperiment and Theory," School of Industrial Engineering, Polytechnic University ofCatalonia, Barcelona, Spain. (May 2004).

Rangel, R., "The California-Catalonia Program for Engineering Innovation," Department ofUniversities and Research, Catalan Government. (May 2004).

Rangel, R., "Studies of Fundamental Particle Dynamics in Unsteady Flows in Microgravity,"Universitat Rovira i Virgili, Tarragona, Spain. (November 2003).

Rangel, R., Computational Science Center, "Solidification of a Supercooled Liquid in a Half-Space: Stagnation-Point Flow and Interface Instability," San Diego State University. (January2003).

Rangel, R., UNESCO Conference on Universities and Regional Development, "FosteringInnovation through Industry-University Partnerships: The Balsells-Generalitat Program as aBridge between UC Irvine and Catalan Universities," Barcelona, Spain. (November 2001).

Rangel, R., "Spherical Particle Motion in Stokes Flows," San Diego State University, Dept. ofAerospace and Mechanical Engineering. (December 2000).

Rangel, R., Computational Science Center, "Fluid Dynamics and Heat Transfer of SphericalParticles in Unsteady Stokes Flows," San Diego State University. (September 2000).

Rangel, R., "Metal Droplet Deposition Modeling for Manufacturing Applications," Graz University,Austria. (July 2000).

Rangel, R., Iberomet VI, "Modelling of In-Flight Oxidation of Metallic Particles in ThermalSpraying," Barcelona, Spain. (June 2000).

Rangel, R., "Metal Droplet Deposition Modeling for Manufacturing Applications," Universitat deBarcelona, Barcelona, Spain. (June 2000).

Rangel, R., ETSII, "Metal Droplet Deposition Modeling for Manufacturing Applications,"Polytechnical University of Madrid, Madrid, Spain. (May 2000).

Roger Rangel


Rangel, R., International Thermal Spray Conference (ITSC-2000), "Mathematical Model of In-Flight Oxidation of Metallic Particles in Thermal Spraying," Montreal, Canada. (May 2000).

Rangel, R., ETSEQ, "Fluid Dynamics and Heat Transfer of Spherical Particles in UnsteadyStokes Flows," Universitat Rovira i Virgili, Tarragona, Spain. (July 1999).

Rangel, R., "Theoretical and Computational Studies involving Droplets and Spherical Particles:particle motion in Stokes flow and droplet impingement and solidification," Department ofApplied Physics, Polytechnical University of Catalunya, Barcelona, Spain. (June 1999).

Rangel, R., ETSII, "Fluid Dynamics and Heat Transfer of Spherical Particles in Unsteady StokesFlows," Polytechnical University of Madrid, Madrid, Spain. (May 1999).

Rangel, R., "Reactive Spray Atomization of Alloys," Department of Chemical Engineering andMetallurgy, Universitat de Barcelona, Barcelona, Spain. (May 1999).

Rangel, R., "Fluid Dynamics and Heat Transfer of Spherical Particles in Unsteady Stokes Flows,"University of Southern California, Los Angeles, California. (September 1998).

Rangel, R., "Inflight and Impact Behavior of Metal Droplets in Thermal Spray DepositionModeling," Los Alamos National Laboratory, Los Alamos, New Mexico. (May 1998).

Rangel, R., "Metal Droplet Deposition Modeling for Manufacturing Applications," Universitat deBarcelona, Barcelona, Spain. (December 1997).

Rangel, R., ASME IMECE, Symposium on Transport Phenomena in Materials Processing andManufacturing, "A Metal-Droplet Deformation and Solidification Model with SubstrateRemelting," Atlanta, Georgia. (November 1996).

Rangel, R., "The Effect of Fluid Motion on Solidification: Stagnation Flow and DropletImpingement Models," Los Alamos National Laboratory, Los Alamos, New Mexico. (October1996).

Rangel, R., ETSEIT, "Liquid Waste Incineration in a Parallel Stream Configuration," UniversitatPolitèctica de Catalunya, Barcelona, Spain. (December 1995).

Rangel, R., "Spray Combustion Research," ETSEIT - Universitat Politèctica de Catalunya,Barcelona, Spain. (December 1995).

Rangel, R., International Conference on Tugnsten and Refractory Metals, their Alloys,Composites and Carbides, Metal Powder Industries Federation, "Experimental andNumerical Investigation of Porosity during Low Pressure Plasma Spraying of Tugsten,"McClean, Virginia. (November 1995).

Rangel, R., "The Physics (and some Mathematics) of Atomization," ASM Company, Inc., Orange,California. (October 1994).

Rangel, R., "Fluid Dynamics and Heat Transfer of Molten Droplets Impinging on a Substrate,"Department of AMES, University of California, San Diego. (March 1993).

Rangel, R., Twenty Fourth Symposium (International) on Combustion, "Theory of Vaporizationand Ignition of a Droplet Cloud in the Field of a Vortex," Sidney, Australia. (July 1992).

Roger Rangel


Rangel, R., SIAM 4th International Conference on Numerical Combustion, "NumericalComputations of Droplet Vaporiation including Radiation Absorption Effects," St. Petersburg,Florida. (December 1991).

Rangel, R., "On the Role of Internal Radiation Absorption in Single Droplet Vaporization,"Università di Napoli, Italy. (November 1991).

Rangel, R., "Vortical Mixing and Heat Transfer in Liquid Sprays," Università di Napoli, Italy.(November 1991).

Rangel, R., "Fuel-Spray Entrainment and Mixing in a Temporally-Growing Shear Layer," BrighamYoung University, Utah. (April 1991).

Rangel, R., Third Brazilian Thermal Science Meeting, "Vortical Mixing and Heat Transfer inLiquid Sprays," Itapema, Brazil. (December 1990).

Rangel, R., Symposium on Heat and Mass Transfer in Fire and Combustion Systems, ASMEWinter Annual Meeting, "Spray Entrainment and Mixing in a Temporally-Growing ShearLayer," Dallas. (November 1990).

Rangel, R., Fluid-Thermal Sciences Meeting with Industrial Affiliates, "Liquid Atomization,"University of California, Irvine. (March 1990).

Rangel, R., Fluid-Thermal Section Meeting with Industrial Affiliates, "Liquid Atomization," Irvine.(March 1990).

Rangel, R., 28th AIAA Aerospace Sciences Meeting, "Nonlinear Spacial Instability of a FluidSheet," Reno, Nevada. Paper No. 90-0118. (January 1990).

Rangel, R., First International Congress on Toxic Combustion Byproducts: Formation andControl, "Modelling of Vaporization-Controlled Incineration of Hazardous Liquid Wastes," LosAngeles, California. (August 1989).

Rangel, R., SIAM 1989 Annual Meeting, "PDF Analysis of Molecular Mixing in Turbulent Flows,"San Diego, California. (July 1989).

Rangel, R., "Vortical Entrainment and Mixing of Heating and Vaporizing Sprays," University ofCalifornia, Irvine. (May 1989).

Rangel, R., "Spray Combustion in Idealized Configurations: Parallel Droplet Streams," SverdrupTechnology-NASA Lewis Research Center. (April 1989).

Rangel, R., "Spray Combustion in Idealized Configurations: Parallel Droplet Streams," FloridaInternational University. (March 1989).

Rangel, R., "Analysis of Vortical Structures in Combustion Processes," Drexel University.(December 1988).

Rangel, R., "Analysis of Vortical Structures in Combustion Processes," Princeton University.(October 1988).

Rangel, R., Fall Meeting of the Western States Section of the Combustion Institute, "AnEvaluation of the Point Source Approximation in Spray Calculations," Dana Point, California.Paper 88-95. (October 1988).

Roger Rangel


Rangel, R., Twenty Second Symposium (International) on Combustion, "Unsteady FlamePropagation in a Two-Dimensional Spray with Transient Droplet Vaporization," Seattle.(August 1988).

Rangel, R., "Vortex-Dynamics Modelling of Interface Instability," Harvard University. (March1988).

Rangel, R., 26th AIAA Aerospace Sciences Meeting, "Unsteady Flame Propagation in a Two-dimensional Spray with Transient Droplet Vaporization," Reno, Nevada. Paper No. 88-0641.(January 1988).

Rangel, R., "Analytical Modelling of Ignition and Flame Propagation in Sprays," CaliforniaInstitute of Technology. (April 1987).

Rangel, R., Spring Meeting of the Western States Section of the Combustion Institute,"Atomization of Liquid Fuels: Nonlinear Growth of Disturbances at an Interface," Provo, Utah.Paper No. 87-43. (April 1987).

Rangel, R., Spring Meeting of the Western States Section of the Combustion Institute, "Two-dimensional Modeling of Flame Propagation in Fuel Stream Arrangements," Provo, Utah.Paper No. 87-43. (April 1987).

Rangel, R., Second ASME-JSME Thermal Engineering Joint Conference, "Vaporization Ignitionand Combustion of Two Parallel Fuel Droplet Streams," Honolulu, Hawaii. (March 1987).

Rangel, R., Twenty-first Symposium (International) on Combustion, "Rapid Vaporization andHeating of Two Parallel Fuel Droplet Streams," Munich. (August 1986).

Rangel, R., Spring Meeting of the Canadian and Western States Sections of the CombustionInstitute, "Rapid Vaporization and Heating of Two Parallel Droplet Streams," Banff, Canada.Paper No. 86-22. (April 1986).

Rangel, R., "Gas-Phase Ignition of a Premixed Combustible by Catalytic and Non-CatalyticCylindrical Surfaces," University of California, Irvine. (April 1985).

Rangel, R., Fall Meeting of the Western States Section of the Combustion Institute, "An Analysisof Gas-Phase Ignition by a Catalytic Cylindrical Surface." (October 1984).

Rangel, R., Fall Meeting of the Western States Section of the Combustion Institute, "An Analysisof Gas-Phase Ignition by a Catalytic Cylindrical Surface," Stanford, California. Paper 84-83.(October 1984).

Professional Articles About You

Space Holography used for real-world science, Appeared In: Optoelectronic World News, LaserFocus World, pp. 43-46. (January 1, 2005).

Contracts, Grants and Sponsored Research

Cooperative Agreement

Rangel, Roger (Principal Investigator), "Balsells Mobility Program," Balsells Foundation,$45,000.00. (February 2014 - January 2015).

Roger Rangel


Rangel, Roger (Principal Investigator), "Balsells Fellowship," Balsells Foundation, $172,500.00.(October 2013 - September 2014).

Rangel, Roger (Principal Investigator), "Balsells-Girona Fellowship," Catalan Government,$21,337.00. (October 2013 - September 2014).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Catalan Goverment, $332,562.00.(October 2012 - September 2013).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Catalan Government, $240,375.00.(October 2009 - September 2010).

Rangel, Roger (Principal Investigator), "California-Catalonia Engineering Program," CatalanDepartment of Universities and Research, $90,000.00. (October 2009 - September 2010).

Rangel, Roger (Principal Investigator), "Cal-Cat Engineering Innovation Program," CatalanDepartment of Universities and Research, $90,000.00. (October 2008 - September 2009).

Rangel, Roger (Principal Investigator), "Cal-Cat Program for Engineering Innovation," CatalanDepartment of Universities and Research, $90,000.00. (October 2007 - September 2008).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Catalan Government,$1,500,000.00. (October 1997 - September 2007).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Catalan Government. (October2005 - September 2006).

Rangel, Roger (Principal Investigator), "Balsells-Girona Fellowship," EPS - University of Girona,Spain. (October 2004 - September 2006).

Grant

Rangel, Roger (Principal Investigator), "California-Catalonia Engineering Program," BalsellsFoundation, $56,250.00. (July 2013 - June 2014).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Balsells Foundation, $172,500.00.(October 2012 - September 2013).

Rangel, Roger (Principal Investigator), Dunn-Rankin, Derek (Co-Principal Investigator), D,Joseph Daniel (Co-Principal Investigator), "Self-Assembly and Chaining of Particles inViscoelastic Liquids: Fundamentals and Applications," NSF - National Science Foundation,$300,000.00. (July 2008 - July 2011).

Rangel, Roger (Principal Investigator), Hemminger (Co-Principal Investigator), Madou, Marc J(Co-Principal Investigator), Shkel (Co-Principal Investigator), "Cal-Cat Alliance for Micro andNanotechnology Science and Engineering," NSF - National Science Foundation,$394,000.00. (October 2005 - September 2008).

Rangel, Roger (Co-Principal Investigator), Madou, Marc J (Principal Investigator), "US-India,"NSF - National Science Foundation, $105,000.00. (October 2005 - September 2008).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Pete Balsells, $335,000.00. (1996 -2007).

Roger Rangel


Rangel, Roger (Principal Investigator), DURSI-Catalan Government. (October 2005 - September2007).

Rangel, Roger (Principal Investigator), "Balsells Fellowship," Balsells Foundation. (October 2004 - September 2007).

Rangel, Roger (Principal Investigator), "Mechanical and Thermal Characterization of Canted CoilSprings," BalSeal Engineering, $25,000.00. (2005 - 2006).

Rangel, Roger (Principal Investigator), Catalan Government. (October 2004 - September 2005).

Rangel, Roger (Principal Investigator), DURSI-Catalan Government. (October 2003 - September2005).

Rangel, Roger (Principal Investigator), Shkel (Co-Principal Investigator), BalSeal Engineering.(May 2004 - April 2005).

Rangel, Roger (Principal Investigator), "Mechanical and Thermal Characterization of Canted CoilSprings," BalSeal Engineering, $68,000.00. (2003 - January 2004).

Rangel, Roger (Principal Investigator), "Investigation of the Influence of Microgravity onTransport Mechanisms in a Virtual Spaceflight Chamber," NASA - National Aeronautics &Space Administration, $110,000.00. (2002 - January 2004).

Rangel, Roger (Principal Investigator), "Investigation of the Influence of Microgravity onTransport Mechanisms in a Virtual Spaceflight Chamber," NASA - National Aeronautics &Space Administration, $183,000.00. (1998 - 2002).

Rangel, Roger (Principal Investigator), "Heat Transfer and Solidification in Non-EquilibriumDroplet-Based Manufacturing of Composite Materials," NSF - National Science Foundation,$200,000.00. (1997 - 2000).

Rangel, Roger (Principal Investigator), "An Innovative Numerical Model for the Simulation ofAdvanced Droplet-Based Materials Processes," Los Alamos National Laboratory,$165,000.00. (1996 - 1999).

Rangel, Roger (Co-Principal Investigator), "Manufacturing of Net-Shapes using Spray Forming:Integration of Process Design, Energy and Environmental Issues," NSF - National ScienceFoundation, $330,000.00. (1996 - 1999).

Rangel, Roger (Co-Principal Investigator), "Heat Transfer in Advanced Spray Processing ofMetal Matrix Composites," NSF - National Science Foundation, $200,000.00. (1993 - 1996).

Rangel, Roger (Co-Principal Investigator), "Droplet/Substrate Interactions in Plasma ThermalSpraying," Electro-Plasma, Inc, $90,000.00. (1991 - 1995).

Rangel, Roger (Principal Investigator), "Efficient Utilization of Energy in Thermal SprayProcessing," Universitywide Energy Research Group, $25,000.00. (1993 - 1994).

Rangel, Roger (Principal Investigator), "Mixing and Condensation in Elliptical Jets," Northrop,$78,000.00. (1991 - 1993).

Rangel, Roger (Principal Investigator), "Interactive Droplet Vaporization in Near- and Super-Critical Conditions," Universitywide Energy Research Group, $25,000.00. (1991 - 1992).

Roger Rangel


Rangel, Roger (Co-Principal Investigator), "Liquid Stability Mechanisms," Air Force, Office ofScientific Research, $280,000.00. (1990 - 1992).

Rangel, Roger (Principal Investigator), "Atomization and Combustion in Gas TurbineCombustors," Naval Air Propulsion Center and MetroLaser, $15,000.00. (1991).

Rangel, Roger (Principal Investigator), "Liquid Atomization," Irvine Faculty Research Committee,$4,700.00. (1990 - 1991).

Rangel, Roger, "Metal Slurry Droplet and Spray Combustion," Navy, Office of Naval Research(ONR), $387,000.00. (1988 - 1991).

Rangel, Roger (Principal Investigator), "Thermal Radiation in Spray-Combustion Computations,"Irvine Faculty Research Committee, $1,300.00. (1989 - 1990).

Rangel, Roger, "Modeling Aspects of Hazardous Waste Incineration," NSF - National ScienceFoundation, $246,000.00. (1987 - 1990).

Rangel, Roger (Co-Principal Investigator), "Vaporization and Drag of Combusting Droplets withNear Neighbors," University-wide Energy Research Group, $18,000.00. (1988 - 1989).

Rangel, Roger, "Fundamental Studies of Spray Combustion and Turbulent Combustion," AirForce, Office of Scientific Research, $300,000.00. (1986 - 1989).

Professional Service

23rd International Symposium on Combustion, Program Subcommittee.

Atomization and Sprays, Ad Hoc Reviewer.

International Journal of Heat and Fluid Flow, Ad Hoc Reviewer.

International Journal of Heat and Mass Transfer, Ad Hoc Reviewer.

Journal of Fluid Mechanics, Ad Hoc Reviewer.

Journal of Heat Transfer, International Journal of Heat and Mass Transfer, International Journalof Heat and Fluid Flow, Numerical Heat Transfer, The Physics of Fluids, Journal of FluidMechanics, Atomization and Sprays, Aerosol Science and Technology, AIAA Journal,Journal of Computational Physics, Combustion and Flame, Combustion Science andTechnology, Journal of Engineering Mathematics, 22nd, 23rd, 24th, 25th, 26th InternationalSymposiums on Combustion, 7th Symposium on Turbulent Shear Flows, U.S. Department ofEnergy, National Science Foundation, Israel Science Foundation, Canadian ResearchCouncil, Austrian Science Fund, University of California Energy Institute, NASA, WestEducational Publishing, Cambridge University Press, John Wiley and Sons, Ltd.

Journal of Heat Transfer, Ad Hoc Reviewer.

NASA, Ad Hoc Reviewer.

Physics of Fluids, Ad Hoc Reviewer. (1995 - Present).

ILASS-Americas Physics of Atomization Technical Committee. (1992 - Present).

ASME K-11 Committee on Heat Transfer in Combustion Systems. (1989 - Present).

Roger Rangel


AIAA Journal, Associate Editor. (September 2006 - September 2009).

California-Catalonia Alliance for Miniaturization Science and Engineering, MNE 2006, SessionCo-Organizer, Barcelona World Trade Center. (September 18, 2006).

6th IBEROMET Conference, Session Chairman, Barcelona, Spain. (June 2000).

Western States Section, Combustion Institute, Executive Committee. (1995 - 1999).

ASME 1996 Int. Mech. Eng. Congress and Exh, Session Vice Chairman, Atlanta. (November1996).

25th International Symposium on Combustion, Program Subcommittee. (1994).

25th International Symposium on Combustion, Local Arrangements Committee. (1994).

24th International Symposium on Combustion, Program Subcommittee. (1992).

24th International Symposium on Combustion, Publications Subcommittee. (1992).

AIAA 30th Aerospace Sciences Meeting, Session Chairman, Reno. (January 1992).

ASME 1990 Winter Annual Meeting, Session Vice Chairman, Dallas. (November 1990).

Consulting

Government Agency, City of Santa Ana. (September 2008 - May 2009).

Academic, Jet Propulsion Laboratory. (March 2006 - July 2006).

For Profit Organization, UNIT Instruments, Inc, Yorba Linda, California. (December 2000 - July2001).

For Profit Organization, Cool Can Technologies, California. (September 2000 - June 2001).

For Profit Organization, MetroLaser, Inc, Irvine, California. (May 1993 - June 2001).

For Profit Organization, Avery, Inc, Pasadena, California. (June 1997 - December 1997).

For Profit Organization, UNIT Instruments, Inc, Yorba Linda, California. (May 1996 - August1996).

For Profit Organization, ASM, Inc, Orange, California. (October 1994 - December 1995).

For Profit Organization, HydroAir Industries, Orange, California. (August 1993 - November 1993).

For Profit Organization, Physical Research, Inc, Irvine, California. (July 1990 - December 1992).

For Profit Organization, STACO Switch, Costa Mesa, California. (January 1992 - July 1992).

For Profit Organization, VAREC, Cypress, California. (July 1990 - August 1991).

For Profit Organization, MetroLaser, Inc, Irvine, California. (January 1989 - December 1989).

For Profit Organization, Mitsubishi Heavy Industries, Japan. (August 1989 - November 1989).

Roger Rangel


Professional Development

Workshop, "JANNAF Ambient Atmosphere Solid Propellant Combustion," Destin, Florida. (March2006).

Workshop, "NASA Research Needs in Fluids Management in Microgravity," National Center forMicrogravity Research, Cleveland, Ohio. (September 2000).

Workshop, "Mass, Momentum, and Energy Exchange in Combusting Sprays: Droplet Studies,"Sandia National Laboratories. (March 1988).

Workshop, "Army Research Office Engine/Fuels," University of California, Davis. (March 1986).

TEACHING

Teaching Interests

Special Pedagogical Activities

Video Lectures for MAE130A, UCI OpenCourseWare, (September 2013 - December 2013).

Video Lectures for MAE91, UCI OpenCourseWare, (April 2013 - June 2013).

Postdoctoral Research Supervision

2006 - 2007, Wei Wang, Advisor2003 - 2004, Carlos Torres, Advisor1999 - 2001, A. M. Ahmed, Advisor1999 - 2000, Christian Weiss, AdvisorGratz University, Austria1998 - 1999, Carlos Coimbra, Advisor1998 - 1999, Mo Chung, AdvisorYeungnam University1997 - 1998, A. Canton, Advisor1994 - 1998, J. P. Delplanque, Advisor1996 - 1997, Xiaoli Bian, Advisor1992 - 1994, H. Liu, Advisor

Doctoral Committee

2004 - 2013, Ronne Toledo, Chair2003 - 2011, Ruth Lambert, Chair2005 - 2009, Arezoo Motavalizadeh-Ardekani, ChairAssistant Professor, Purdue University2005, Saad Alabduljalil, ChairAssistant Professor, Kuwait University1998, C. F. M. Coimbra, ChairAssociate Professor, Mechanical Engng. Dept, University of California, Merced1996, A. J. K. Leiroz, ChairProfessor, Mechanical Engineering Department, UFRJ, Brazil1996, Xiaoli Bian, ChairResearch Engineer, Boeing, California.1992, Paulo L. C. Lage, Co-Chair

Roger Rangel


Professor, Chemical Engineering Department, UFRJ, Brazil

Doctoral Candidacy Committee

September 2010 - Present, Franz Hernandez, Chair

Directed Individual/Independent Study

2005, D. A. Terry, Advisor

Master's Thesis Committee

2005, Josep Maria Soler, Chair2001 - 2002, J Carmona, Advisor2000 - 2002, R. A. Lambert, Advisor1999 - 2000, S Alabduljalil, AdvisorCourses only1998, M Elhakimi, Advisor1996, E Laso, Advisor1995, B Ohm, AdvisorCourses Only1995, L Kuo, Advisor1993, R Ghanta, Advisor1992, M Fyrillas, AdvisorCourses Only1991, E DiStefano, Advisor1989, F Miralles, AdvisorCo-advisor with W. A. Sirignano1989, J. P. Delplanque, AdvisorCo-advisor with W. A. Sirignano

Undergraduate Honors Thesis

August 2005 - August 2006, Victor Noguera, SupervisorFrom UPC, Catalonia, Spain, conducted his senior thesis under my supervision

Undergraduate Research Supervision

February 2014 - July 2014, Claudia Lopez Camara, AdvisorVisiting student in Balsells ProgramFebruary 2014 - July 2014, Susanna Cortada, AdvisorVisiting student in Balsells Program

SERVICE

Department Service

Administrative Assignment, Graduate-Student Adviser. (2010 - Present).

Chair, Graduate Studies Committee. (2010 - 2014).

Graduate Studies Committee, MAE Department. (1993 - 2014).

Chair, Search Committee for Biofluids/Energy position. (January 2014 - June 2014).

Roger Rangel


Vice-Chair, Associate Chair. (2002 - 2005).

Chair, Graduate Student Recruiting and Admissions Committee. (2001 - 2005).

MAE Faculty Liaison, Center for International Education. (1996 - 2005).

Section Head, Fluid and Thermal Sciences. (1992 - 1999).

Undergraduate Advisor, MAE Department. (1994 - 1998).

Committee Member, Undergraduate Curriculum. (1989 - 1998).

ABET Commitee Member, MAE Department. (1994 - 1996).

Commitee Member, ME188 Design Course. (1994).

Faculty Advisor, ASME Student Section. (1989 - 1992).

Search committee member for Computational Aerodynamics faculty position. (1989 - 1991).

Subcommittee Member, (Heat and Mass Transfer) for undergraduate laboratory. (1990).

Subcommittee Member, (Thermodynamics) for undergraduate laboratory. (1990).

School/College Service

Member, APAC. (2013 - Present).

Director, Balsells Fellowship Program. (July 1996 - Present).

The California-Catalonia Engineering Programs and the Balsells Fellowship. (November 2005).

The California-Catalonia Engineering Programs and the Balsells Fellowship. (November 2004).

The Balsells Fellowship: graduate-study opportunities in Engineering at the University ofCalifornia, Irvine. (November 2003).

The Balsells Fellowship: graduate-study opportunities in Engineering at the University ofCalifornia, Irvine. (November 2002).

The Balsells Fellowship: Graduate-Study Opportunities in Engineering at the University ofCalifornia, Irvine. (November 2001).

Graduate-Study Opportunities in Engineering at UC Irvine: the Balsells Fellowship. (November2000).

Chair, School of Engineering Undergraduate Committee. (1996 - 1998).

Executive Committee Member, School of Engineering. (1996 - 1998).

Dean's Advisory Committee on Academic Computing. (1993).

Engineering Delegate to the Representative Assembly. (1990 - 1992).

Guest Speaker, Lecture delivered to the Under-Represented Incoming Class. (August 1992).

Roger Rangel


Guest Speaker, Discover UCI Conference. (February 1991).

University Service

Member, Committee on Privilege and Tenure. (September 2012 - Present).

Director, California-Catalonia Engineering Programs. (January 2003 - Present).

Engineering Coordinator, California-Catalonia Program. (1998 - Present).

Chair, Committee on Committees. (September 2011 - August 2012).

Member, Committee on Committees. (September 2009 - August 2012).

Member, Council on Academic Personnel (CAP). (2006 - 2009).

Member, Council on Academic Personnel (CAP). (2003 - 2005).

Council on Research, Library, and Computing Resources. (2000 - 2002).

Library Committee. (1996 - 1997).

Selection Committee, Education Abroad Program. (1995 - 1996).

Advisory Board Member, Certif. Program in Fire Protection Engineering. (1992 - 1996).

Engineering Dean Search Committee Member. (1994 - 1995).

Public Service

Member, Corazon, Santa Ana, CA. (2007 - Present).

Guest Speaker, Turtle Rock Elementary School. (January 2004).

Guest Speaker, Turtle Rock Elementary School. (April 2000).

roger rangel - faculty.sites.uci.edu · roger rangel university of california, irvine irvine, ca...

Documents