rohs lookup 212 - pennengineering · pennengineering(–rohs(compliance(chart(–212 page%3%of%49...

PennEngineering – RoHS Compliance Chart – 212

www.pemnet.com of 49

Type Plating Plating Description Compliant StatusStandard Finish

A4 None No finish suffixCompliant with no exemptions required Yes

AC None No finish suffixCompliant with no exemptions required Yes

AEA:ALUM-‐MAXTITE ANODIZED Anodized per AMS-‐A-‐8625

Compliant with no exemptions required Yes

AECH:4037-‐MAXTITE CS

Cadmium and Clear Chromate

Not compliant because finish contains hexavalent chromium Yes

AECH:4037-‐MAXTITE CSI

Cadmium and Yellow Chromate

Not compliant because finish contains hexavalent chromium No

AECH:4037-‐MAXTITE ZN Zinc Nickel


AECH:4037-‐MAXTITE ZNR

RoHS Zinc and Clear Chromate

Compliant with no exemptions required No

AECH:4037-‐MAXTITE ZY Zinc and Yellow Chromate


AECH:4037-‐MAXTITE ZYR

RoHS Zinc and Yellow Chromate


AECK ZI Zinc and clear chromateCompliant with no exemptions required Yes

AECK ZN Zinc NickelCompliant with no exemptions required No

AECR ZI Zinc and clear chromateCompliant with no exemptions required Yes

AECR ZN Zinc NickelCompliant with no exemptions required No

AEFH ZI Zinc and clear chromateCompliant with no exemptions required Yes

AEFH ZN Zinc NickelCompliant with no exemptions required No

AEFHH ZI Zinc and clear chromateCompliant with no exemptions required Yes

AEFHH ZN Zinc NickelCompliant with no exemptions required No

AEFK ZI Zinc and clear chromateCompliant with no exemptions required Yes

AEFK ZN Zinc NickelCompliant with no exemptions required No

AEFR ZI Zinc and clear chromateCompliant with no exemptions required Yes

AEFR ZN Zinc NickelCompliant with no exemptions required No




AEHA 1 Clear protective coatingCompliant with no exemptions required Yes

AEHS 10 RoHS Zinc/ClearCompliant with no exemptions required No

AEHS 2Cadmium and Clear Chromate


AEHS 3 Zinc and Clear Chromate


AEHS 4 Zinc and Yellow Chromate

Please contact the factory at [email protected] for further information. No

AEHS 5 Zinc and Black Chromate


AEHS 6 Tin Plate


AEHS 7Cadmium and Yellow Chromate


AEHS 8 RoHS Zinc/YellowCompliant with no exemptions required Yes

AEHS 9Tin/Zinc and Yellow Chromate


AEKA 1 Clear protective coatingCompliant with no exemptions required Yes

AEKS 10 RoHS Zinc/ClearCompliant with no exemptions required No

AEKS 2Cadmium and Clear Chromate


AEKS 3 Zinc and Clear Chromate


AEKS 4 Zinc and Yellow Chromate


AEKS 5 Zinc and Black Chromate


AEKS 6 Tin Plate





AEKS 7Cadmium and Yellow Chromate


AEKS 8 RoHS Zinc/YellowCompliant with no exemptions required Yes

AEKS 9Tin/Zinc and Yellow Chromate


AELA 1 Clear protective coatingCompliant with no exemptions required Yes

AELS 10 RoHS Zinc/ClearCompliant with no exemptions required No

AELS 2Cadmium and Clear Chromate


AELS 3 Zinc and Clear Chromate


AELS 4 Zinc and Yellow Chromate


AELS 5 Zinc and Black Chromate


AELS 6 Tin Plate


AELS 7Cadmium and Yellow Chromate


AELS 8 RoHS Zinc/YellowCompliant with no exemptions required Yes

AELS 9Tin/Zinc and Yellow Chromate


AENM:316-‐SS-‐MAXTITE PASSIVATE

Passivation per AMS-‐2700 (QQ-‐P-‐35) Type II


AEOS 10 RoHS Zinc/ClearCompliant with no exemptions required Yes

AEOS 2Cadmium and Clear Chromate


AEOS 3 Zinc and Clear Chromate





AEOS 4 Zinc and Yellow Chromate


AEOS 5 Zinc and Black Chromate


AEOS 6 Tin Plate


AEOS 7Cadmium and Yellow Chromate


AEOS 8 RoHS Zinc/YellowCompliant with no exemptions required No

AEOS 9Tin/Zinc and Yellow Chromate


AES:PLUSTITE 10 RoHS Zinc/ClearCompliant with no exemptions required No

AES:PLUSTITE 2Cadmium and Clear Chromate


AES:PLUSTITE 3 Zinc and Clear Chromate


AES:PLUSTITE 4 Zinc and Yellow Chromate


AES:PLUSTITE 5 Zinc and Black Chromate


AES:PLUSTITE 6 Tin Plate


AES:PLUSTITE 7Cadmium and Yellow Chromate


AES:PLUSTITE 8 RoHS Zinc/YellowCompliant with no exemptions required No

AES:PLUSTITE 9Tin/Zinc and Yellow Chromate


AES:PLUSTITE ZYRRoHS Zinc and Yellow Chromate





AES:STEEL-‐MAXTITE CS



AES:STEEL-‐MAXTITE CSI



AES:STEEL-‐MAXTITE ZN Zinc Nickel


AES:STEEL-‐MAXTITE ZNR



AES:STEEL-‐MAXTITE ZY Zinc and Yellow Chromate


AES:STEEL-‐MAXTITE ZYR



AES:STEEL-‐MAXTITE-‐FULL-‐HEX CS



AES:STEEL-‐MAXTITE-‐FULL-‐HEX CSI



AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZN Zinc Nickel


AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZNR



AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZY Zinc and Yellow Chromate


AES:STEEL-‐MAXTITE-‐FULL-‐HEX ZYR



AES:STUD-‐SERIES 10 RoHS Zinc/ClearCompliant with no exemptions required No

AES:STUD-‐SERIES 2Cadmium and Clear Chromate


AES:STUD-‐SERIES 3 Zinc and Clear Chromate


AES:STUD-‐SERIES 4 Zinc and Yellow Chromate





AES:STUD-‐SERIES 5 Zinc and Black Chromate


AES:STUD-‐SERIES 6 Tin Plate


AES:STUD-‐SERIES 7Cadmium and Yellow Chromate


AES:STUD-‐SERIES 9Tin/Zinc and Yellow Chromate


AES:STUD-‐SERIESno designation RoHS Zinc/Yellow


AESS:430-‐SS-‐MAXTITE PASSIVATE

Passivation per AMS-‐2700 (QQ-‐P-‐35) Type II


AETA 2Cadmium and Clear Chromate


AETC 2Cadmium and Clear Chromate


AETH ZI Zinc and clear chromateCompliant with no exemptions required Yes

AETH ZN Zinc NickelCompliant with no exemptions required No

AETHC None No finish suffixCompliant with no exemptions required Yes

AETHH ZI Zinc and clear chromateCompliant with no exemptions required Yes

AETHH ZN Zinc NickelCompliant with no exemptions required No

AETK ZI Zinc and clear chromateCompliant with no exemptions required Yes

AETK ZN Zinc NickelCompliant with no exemptions required No

AETR ZI Zinc and clear chromateCompliant with no exemptions required Yes

AETR ZN Zinc NickelCompliant with no exemptions required No

AETS 2Cadmium and Clear Chromate


AS BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No




AS BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

AS BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

AS CCadmium and yellow chromate


AS CICadmium and clear chromate


AS CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

AS CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

AS DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

AS ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

AS ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

AS X No FinishCompliant using exemption for up to 0.35% lead in steel No

AS X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

AS ZB Zinc and black chromate

Compliant using exemption for up to 0.35% lead in steel, date coded on or after September 15, 2006 No

AS ZC Zinc and yellow chromate

Compliant using exemption for up to 0.35% lead in steel, date coded on or after March 1, 2006. No

AS ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

AS ZTZinc and clear chromate, 96 hr.

Compliant using exemption for up to 0.35% lead in steel No

B BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

B BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

B BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

B CCadmium and yellow chromate





B CICadmium and clear chromate


B CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

B CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

B DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

B ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

B ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

B X No FinishCompliant using exemption for up to 0.35% lead in steel No

B X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

B ZB Zinc and black chromate


B ZC Zinc and yellow chromate


B ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

B ZTZinc and clear chromate, 96 hr.


BS None No finish suffixCompliant with no exemptions required Yes

BSO BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

BSO BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

BSO BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

BSO CCadmium and yellow chromate


BSO CICadmium and clear chromate


BSO CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No




BSO CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

BSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

BSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

BSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

BSO X No FinishCompliant using exemption for up to 0.35% lead in steel No

BSO X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

BSO ZB Zinc and black chromate


BSO ZC Zinc and yellow chromate


BSO ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

BSO ZTZinc and clear chromate, 96 hr.


BSO4 None No finish suffixCompliant with no exemptions required Yes

BSOA None No finish suffixCompliant with no exemptions required Yes

BSON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

BSON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

BSON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

BSON CCadmium and yellow chromate


BSON CICadmium and clear chromate


BSON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

BSON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

BSON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No




BSON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

BSON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

BSON X No FinishCompliant using exemption for up to 0.35% lead in steel No

BSON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

BSON ZB Zinc and black chromate


BSON ZC Zinc and yellow chromate


BSON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

BSON ZTZinc and clear chromate, 96 hr.


BSOS None No finish suffixCompliant with no exemptions required Yes

CFHA None No finish suffixCompliant with no exemptions required Yes

CFHC None No finish suffixCompliant with no exemptions required Yes

CFN BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

CFN BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

CFN BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

CFN CCadmium and yellow chromate


CFN CICadmium and clear chromate


CFN CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

CFN CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

CFN DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

CFN ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No




CFN ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

CFN X No FinishCompliant using exemption for up to 0.35% lead in steel No

CFN X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

CFN ZB Zinc and black chromate


CFN ZC Zinc and yellow chromate


CFN ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

CFN ZTZinc and clear chromate, 96 hr.


CHA None No finish suffixCompliant with no exemptions required Yes

CHC None No finish suffixCompliant with no exemptions required Yes

CLA None No finish suffixCompliant with no exemptions required Yes

CLC BN Black NitrideCompliant with no exemptions required No

CLC BO Black OxideCompliant with no exemptions required No

CLC None No finish suffixCompliant with no exemptions required Yes

CLS None No finish suffixCompliant with no exemptions required Yes

CLSS BN Black NitrideCompliant with no exemptions required No

CLSS BO Black OxideCompliant with no exemptions required No

CLSS None No finish suffixCompliant with no exemptions required Yes

CSOS None No finish suffixCompliant with no exemptions required Yes

CSS BN Black NitrideCompliant with no exemptions required No

CSS BO Black OxideCompliant with no exemptions required No

CSS None No finish suffixCompliant with no exemptions required Yes




DSO BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

DSO BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

DSO BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

DSO CCadmium and yellow chromate


DSO CICadmium and clear chromate


DSO CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

DSO CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

DSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

DSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

DSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

DSO X No FinishCompliant using exemption for up to 0.35% lead in steel No

DSO X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

DSO ZB Zinc and black chromate


DSO ZC Zinc and yellow chromate


DSO ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

DSO ZTZinc and clear chromate, 96 hr.


DSOS None No finish suffixCompliant with no exemptions required Yes

F BN Black NitrideCompliant with no exemptions required No

F BO Black OxideCompliant with no exemptions required No

F None No finish suffixCompliant with no exemptions required Yes




F10 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

F10 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

F10 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

F10 CCadmium and yellow chromate


F10 CICadmium and clear chromate


F10 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

F10 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

F10 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

F10 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

F10 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

F10 X No FinishCompliant using exemption for up to 0.35% lead in steel No

F10 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

F10 ZB Zinc and black chromate


F10 ZC Zinc and yellow chromate


F10 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

F10 ZTZinc and clear chromate, 96 hr.


FE EFDry film lube over cadmium

Not compliant because the dry film lubricant contains a lead compound No

FE MD Dry film lubeCompliant with no exemptions required Yes

FE SF Dry film lube over silver





FEO EFDry film lube over cadmium


FEO MD Dry film lubeCompliant with no exemptions required Yes

FEO SF Dry film lube over silver


FEOX BN Black NitrideCompliant with no exemptions required No

FEOX BO Black OxideCompliant with no exemptions required No

FEOX None No finish suffixCompliant with no exemptions required Yes

FEX BN Black NitrideCompliant with no exemptions required No

FEX BO Black OxideCompliant with no exemptions required No

FEX None No finish suffixCompliant with no exemptions required Yes

FH BN Black NitrideCompliant with no exemptions required No

FH BO Black OxideCompliant with no exemptions required No

FH BZ Zinc and blue dyeCompliant with no exemptions required No

FH CCadmium and yellow chromate


FH CICadmium and clear chromate


FH CN Bright nickel over copperCompliant with no exemptions required No

FH CU Copper flashCompliant with no exemptions required No

FH DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

FH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

FH ET ElectrotinCompliant with no exemptions required No

FH X No FinishCompliant with no exemptions required No

FH X17 Zinc and clear dyed yellowCompliant with no exemptions required No




FH ZB Zinc and black chromate

Compliant with no exemptions required, date coded on or after September 15, 2006 No

FH ZC Zinc and yellow chromate

Compliant with no exemptions required, date coded on or after March 1, 2006 No

FH ZI Zinc and clear chromateCompliant with no exemptions required Yes

FH ZTZinc and clear chromate, 96 hr.


FH4 None No finish suffixCompliant with no exemptions required Yes

FHA None No finish suffixCompliant with no exemptions required Yes

FHL BN Black NitrideCompliant with no exemptions required No

FHL BO Black OxideCompliant with no exemptions required No

FHL BZ Zinc and blue dyeCompliant with no exemptions required No

FHL CCadmium and yellow chromate


FHL CICadmium and clear chromate


FHL CN Bright nickel over copperCompliant with no exemptions required No

FHL CU Copper flashCompliant with no exemptions required No

FHL DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

FHL ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

FHL ET ElectrotinCompliant with no exemptions required No

FHL X No FinishCompliant with no exemptions required No

FHL X17 Zinc and clear dyed yellowCompliant with no exemptions required No

FHL ZB Zinc and black chromate





FHL ZC Zinc and yellow chromate


FHL ZI Zinc and clear chromateCompliant with no exemptions required Yes

FHL ZTZinc and clear chromate, 96 hr.


FHLS None No finish suffixCompliant with no exemptions required Yes

FHP None No finish suffixCompliant with no exemptions required Yes

FHS None No finish suffixCompliant with no exemptions required Yes

H BN Black NitrideCompliant with no exemptions required No

H BO Black OxideCompliant with no exemptions required No

H BZ Zinc and blue dyeCompliant with no exemptions required No

H CCadmium and yellow chromate


H CICadmium and clear chromate


H CN Bright nickel over copperCompliant with no exemptions required No

H CU Copper flashCompliant with no exemptions required No

H DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

H ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

H ET ElectrotinCompliant with no exemptions required No

H X No FinishCompliant with no exemptions required Yes

H X17 Zinc and clear dyed yellowCompliant with no exemptions required No

H ZB Zinc and black chromate





H ZC Zinc and yellow chromate


H ZI Zinc and clear chromateCompliant with no exemptions required Yes

H ZTZinc and clear chromate, 96 hr.


HF109 BN Black NitrideCompliant with no exemptions required No

HF109 BO Black OxideCompliant with no exemptions required No

HF109 BZ Zinc and blue dyeCompliant with no exemptions required No

HF109 CCadmium and yellow chromate


HF109 CICadmium and clear chromate


HF109 CN Bright nickel over copperCompliant with no exemptions required No

HF109 CU Copper flashCompliant with no exemptions required No

HF109 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HF109 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HF109 ET ElectrotinCompliant with no exemptions required No

HF109 X No FinishCompliant with no exemptions required No

HF109 X17 Zinc and clear dyed yellowCompliant with no exemptions required No

HF109 ZB Zinc and black chromate


HF109 ZC Zinc and yellow chromate


HF109 ZI Zinc and clear chromateCompliant with no exemptions required Yes

HF109 ZTZinc and clear chromate, 96 hr.





HFE BN Black NitrideCompliant with no exemptions required No

HFE BO Black OxideCompliant with no exemptions required No

HFE BZ Zinc and blue dyeCompliant with no exemptions required No

HFE CCadmium and yellow chromate


HFE CICadmium and clear chromate


HFE CN Bright nickel over copperCompliant with no exemptions required No

HFE CU Copper flashCompliant with no exemptions required No

HFE DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HFE ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HFE ET ElectrotinCompliant with no exemptions required No

HFE X No FinishCompliant with no exemptions required No

HFE X17 Zinc and clear dyed yellowCompliant with no exemptions required No

HFE ZB Zinc and black chromate


HFE ZC Zinc and yellow chromate


HFE ZI Zinc and clear chromateCompliant with no exemptions required Yes

HFE ZTZinc and clear chromate, 96 hr.


HFG8 BN Black NitrideCompliant with no exemptions required No

HFG8 BO Black OxideCompliant with no exemptions required No

HFG8 BZ Zinc and blue dyeCompliant with no exemptions required No




HFG8 CCadmium and yellow chromate


HFG8 CICadmium and clear chromate


HFG8 CN Bright nickel over copperCompliant with no exemptions required No

HFG8 CU Copper flashCompliant with no exemptions required No

HFG8 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HFG8 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HFG8 ET ElectrotinCompliant with no exemptions required No

HFG8 X No FinishCompliant with no exemptions required No

HFG8 X17 Zinc and clear dyed yellowCompliant with no exemptions required No

HFG8 ZB Zinc and black chromate


HFG8 ZC Zinc and yellow chromate


HFG8 ZI Zinc and clear chromateCompliant with no exemptions required Yes

HFG8 ZTZinc and clear chromate, 96 hr.


HFH BN Black NitrideCompliant with no exemptions required No

HFH BO Black OxideCompliant with no exemptions required No

HFH BZ Zinc and blue dyeCompliant with no exemptions required No

HFH CCadmium and yellow chromate


HFH CICadmium and clear chromate


HFH CN Bright nickel over copperCompliant with no exemptions required No




HFH CU Copper flashCompliant with no exemptions required No

HFH DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HFH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HFH ET ElectrotinCompliant with no exemptions required No

HFH X No FinishCompliant with no exemptions required No

HFH X17 Zinc and clear dyed yellowCompliant with no exemptions required No

HFH ZB Zinc and black chromate


HFH ZC Zinc and yellow chromate


HFH ZI Zinc and clear chromateCompliant with no exemptions required Yes

HFH ZTZinc and clear chromate, 96 hr.


HFHB BN Black NitrideCompliant with no exemptions required No

HFHB BO Black OxideCompliant with no exemptions required No

HFHB BZ Zinc and blue dyeCompliant with no exemptions required No

HFHB CCadmium and yellow chromate


HFHB CICadmium and clear chromate


HFHB CN Bright nickel over copperCompliant with no exemptions required No

HFHB CU Copper flashCompliant with no exemptions required No

HFHB DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HFHB ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HFHB ET ElectrotinCompliant with no exemptions required No




HFHB X No FinishCompliant with no exemptions required Yes

HFHB X17 Zinc and clear dyed yellowCompliant with no exemptions required No

HFHB ZB Zinc and black chromate


HFHB ZC Zinc and yellow chromate


HFHB ZI Zinc and clear chromateCompliant with no exemptions required No

HFHB ZTZinc and clear chromate, 96 hr.


HFHS None No finish suffixCompliant with no exemptions required Yes

HN BN Black NitrideCompliant with no exemptions required No

HN BO Black OxideCompliant with no exemptions required No

HN BZ Zinc and blue dyeCompliant with no exemptions required No

HN CCadmium and yellow chromate


HN CICadmium and clear chromate


HN CN Bright nickel over copperCompliant with no exemptions required No

HN CU Copper flashCompliant with no exemptions required No

HN DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HN ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HN ET ElectrotinCompliant with no exemptions required No

HN X No FinishCompliant with no exemptions required Yes

HN X17 Zinc and clear dyed yellowCompliant with no exemptions required No




HN ZB Zinc and black chromate


HN ZC Zinc and yellow chromate

Compliant with no exemptions required, date coded on or after March 1, 2006. No

HN ZI Zinc and clear chromateCompliant with no exemptions required Yes

HN ZTZinc and clear chromate, 96 hr.


HNL BN Black NitrideCompliant with no exemptions required No

HNL BO Black OxideCompliant with no exemptions required No

HNL BZ Zinc and blue dyeCompliant with no exemptions required No

HNL CICadmium and clear chromate


HNL CN Bright nickel over copperCompliant with no exemptions required No

HNL CU Copper flashCompliant with no exemptions required No

HNL DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

HNL ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

HNL ET ElectrotinCompliant with no exemptions required No

HNL LZ

Zinc w/ clear trivalent chromate + sealant/lubricant


HNL X No FinishCompliant with no exemptions required No

HNL X17 Zinc and clear dyed yellowCompliant with no exemptions required No

HNL ZB Zinc and black chromate


HNL ZC Zinc and yellow chromate





HNL ZI Zinc and clear chromateCompliant with no exemptions required No

HNL ZTZinc and clear chromate, 96 hr.


IBB None No finish suffix

Compliant using exemption for up to 4.0% lead in copper alloys Yes

IBC BN Black NitrideCompliant with no exemptions required No

IBC BO Black OxideCompliant with no exemptions required No

IBC None No finish suffixCompliant with no exemptions required Yes

IBLC BN Black NitrideCompliant with no exemptions required No

IBLC BO Black OxideCompliant with no exemptions required No

IBLC None No finish suffixCompliant with no exemptions required Yes

IPIS BN Black NitrideCompliant with no exemptions required No

IPIS BO Black OxideCompliant with no exemptions required No

IPIS None No finish suffixCompliant with no exemptions required Yes

ISB None No finish suffix


ISC BN Black NitrideCompliant with no exemptions required No

ISC BO Black OxideCompliant with no exemptions required No

ISC None No finish suffixCompliant with no exemptions required Yes

ITB None No finish suffix


ITC BN Black NitrideCompliant with no exemptions required No

ITC BO Black OxideCompliant with no exemptions required No

ITC None No finish suffixCompliant with no exemptions required Yes

IUB None No finish suffix





IUC BN Black NitrideCompliant with no exemptions required No

IUC BO Black OxideCompliant with no exemptions required No

IUC None No finish suffixCompliant with no exemptions required Yes

IUTB None No finish suffix


IUTC BN Black NitrideCompliant with no exemptions required No

IUTC BO Black OxideCompliant with no exemptions required No

IUTC None No finish suffixCompliant with no exemptions required Yes

KF2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

KF2 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

KF2 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

KF2 CCadmium and yellow chromate


KF2 CICadmium and clear chromate


KF2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

KF2 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

KF2 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

KF2 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

KF2 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes

KF2 X No FinishCompliant using exemption for up to 0.35% lead in steel No

KF2 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

KF2 ZB Zinc and black chromate





KF2 ZC Zinc and yellow chromate


KF2 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No

KF2 ZTZinc and clear chromate, 96 hr.


KFB3 BN Black Nitride

Compliant using exemption for up to 4.0% lead in copper alloys No

KFB3 BO Black Oxide


KFB3 BZ Zinc and blue dye


KFB3 CCadmium and yellow chromate


KFB3 CICadmium and clear chromate


KFB3 CN Bright nickel over copper


KFB3 CU Copper flash


KFB3 DT Matte Tin


KFB3 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

KFB3 ET Electrotin


KFB3 X No Finish


KFB3 X17 Zinc and clear dyed yellow





KFB3 ZB Zinc and black chromate

Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after September 15 , 2006 No

KFB3 ZC Zinc and yellow chromate

Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after March 1, 2006 No

KFB3 ZI Zinc and clear chromate


KFB3 ZTZinc and clear chromate, 96 hr.


KFE BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

KFE BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

KFE BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

KFE CCadmium and yellow chromate


KFE CICadmium and clear chromate


KFE CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

KFE CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

KFE DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

KFE ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

KFE ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes

KFE X No FinishCompliant using exemption for up to 0.35% lead in steel No

KFE X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

KFE ZB Zinc and black chromate





KFE ZC Zinc and yellow chromate


KFE ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No

KFE ZTZinc and clear chromate, 96 hr.


KFH BN Black NitrideCompliant with no exemptions required No

KFH BO Black OxideCompliant with no exemptions required No

KFH BZ Zinc and blue dyeCompliant with no exemptions required No

KFH CCadmium and yellow chromate


KFH CICadmium and clear chromate


KFH CN Bright nickel over copperCompliant with no exemptions required No

KFH CU Copper flashCompliant with no exemptions required No

KFH DT Matte TinCompliant with no exemptions required No

KFH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

KFH ET ElectrotinCompliant with no exemptions required Yes

KFH X No FinishCompliant with no exemptions required No

KFH X17 Zinc and clear dyed yellowCompliant with no exemptions required No

KFH ZB Zinc and black chromate


KFH ZC Zinc and yellow chromate


KFH ZI Zinc and clear chromateCompliant with no exemptions required No

KFH ZTZinc and clear chromate, 96 hr.





KFS2 None No finish suffixCompliant with no exemptions required Yes

KFSE None No finish suffixCompliant with no exemptions required Yes

KSSB BN Black Nitride


KSSB BO Black Oxide


KSSB BZ Zinc and blue dye


KSSB CCadmium and yellow chromate


KSSB CICadmium and clear chromate


KSSB CN Bright nickel over copper


KSSB CU Copper flash


KSSB DT Matte Tin


KSSB ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

KSSB ET Electrotin


KSSB X No Finish


KSSB X17 Zinc and clear dyed yellow


KSSB ZB Zinc and black chromate

Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after September 15 , 2006 No




KSSB ZC Zinc and yellow chromate

Compliant using exemption for up to 4.0% lead in copper alloys, date coded on or after March 1, 2006 No

KSSB ZI Zinc and clear chromate


KSSB ZTZinc and clear chromate, 96 hr.


LA4 FDry film lube over cadmium


LA4 MD Dry film lubeCompliant with no exemptions required Yes

LA4 SF Dry film lube over silver


LAC FDry film lube over cadmium


LAC MD Dry film lubeCompliant with no exemptions required Yes

LAC SF Dry film lube over silver


LAS MD Dry film lubeCompliant using exemption for up to 0.35% lead in steel Yes

LAS SF Dry film lube over silver


LAS ZF Dry film/cad/zinc retainer


LK EFDry film lube over cadmium


LK MD Dry film lubeCompliant using exemption for up to 0.35% lead in steel Yes

LK SF Dry film lube over silver


LKA None No finish suffixCompliant with no exemptions required Yes




LKS EFDry film lube over cadmium


LKS MD Dry film lubeCompliant with no exemptions required Yes

LKS SF Dry film lube over silver


MPP X No FinishCompliant with no exemptions required Yes

MS04 BN Black NitrideCompliant with no exemptions required No

MSO4 BO Black OxideCompliant with no exemptions required No

MSO4 X No FinishCompliant with no exemptions required Yes

N10 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

N10 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

N10 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

N10 CCadmium and yellow chromate


N10 CICadmium and clear chromate


N10 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

N10 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

N10 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

N10 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

N10 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

N10 X No FinishCompliant using exemption for up to 0.35% lead in steel No

N10 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

N10 ZB Zinc and black chromate





N10 ZC Zinc and yellow chromate


N10 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

N10 ZTZinc and clear chromate, 96 hr.


NFPA None No finish suffixCompliant with no exemptions required Yes

NFPC BN Black NitrideCompliant with no exemptions required No

NFPC BO Black OxideCompliant with no exemptions required No

NFPC None No finish suffixCompliant with no exemptions required Yes

PF11 BLBlack anodize/black nitride


PF11 None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes

PF11M BLBlack anodize/black nitride


PF11M None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes

PF11MF BLBlack anodize/black nitride


PF11MF None No finish suffixCompliant with no exemptions required Yes

PF11MW BLBlack anodize/black nitride


PF11MW None No finish suffixCompliant with no exemptions required Yes

PF11PM BLBlack anodize/black nitride


PF11PM None No finish suffixCompliant using exemption for up to 0.35% lead in steel Yes







PF12MF BLBlack anodize/black nitride






PF12MW BLBlack anodize/black nitride


PF12MW None No finish suffixCompliant with no exemptions required Yes













PF30 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

PF30 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes









PF7M CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes





PFC2 BN Black NitrideCompliant with no exemptions required No

PFC2 BO Black OxideCompliant with no exemptions required No

PFC2 None No finish suffixCompliant with no exemptions required Yes

PFC2P BN Black NitrideCompliant with no exemptions required No

PFC2P BO Black OxideCompliant with no exemptions required No

PFC2P None No finish suffixCompliant with no exemptions required Yes

PFC4 None No finish suffixCompliant with no exemptions required Yes

PFF ### Numeric color code(s)Compliant with no exemptions required Yes

PFHV BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

PFHV CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes

PFK BN Black NitrideCompliant with no exemptions required No

PFK BO Black OxideCompliant with no exemptions required No

PFK None No finish suffixCompliant with no exemptions required Yes

PFLB None No finish suffix


PFP ### Numeric color code(s)Compliant using exemption for up to 0.35% lead in steel Yes

PFS ### Numeric color code(s)Compliant with no exemptions required Yes

PFS2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

PFS2 BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

PFS2 BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

PFS2 CCadmium and yellow chromate


PFS2 CICadmium and clear chromate





PFS2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

PFS2 CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

PFS2 DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

PFS2 ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

PFS2 ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

PFS2 X No FinishCompliant using exemption for up to 0.35% lead in steel No

PFS2 X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

PFS2 ZB Zinc and black chromate


PFS2 ZC Zinc and yellow chromate


PFS2 ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No

PFS2 ZTZinc and clear chromate, 96 hr.


PFT ### Numeric color code(s)Compliant with no exemptions required Yes

PKB None No finish suffix


PL BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

PL CCadmium and yellow chromate


PL CICadmium and clear chromate


PL X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

PL ZB Zinc and black chromate





PL ZC Zinc and yellow chromate


PL ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

PL ZTZinc and clear chromate, 96 hr.


PLC None No finish suffixCompliant with no exemptions required Yes

PPB None No finish suffix


PR10 BN Black NitrideCompliant with no exemptions required No

PR10 BO Black OxideCompliant with no exemptions required No

PR10 None No finish suffixCompliant with no exemptions required Yes

PS10 BN Black NitrideCompliant with no exemptions required No

PS10 BO Black OxideCompliant with no exemptions required No

PS10 None No finish suffixCompliant with no exemptions required Yes

PSHP ### Numeric color code(s)Compliant with no exemptions required Yes

PSL2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

PSL2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes

PTL2 BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

PTL2 CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel Yes

RAA None No finish suffixCompliant with no exemptions required Yes

RAS X No FinishCompliant with no exemptions required No

RAS ZI Zinc and clear chromateCompliant with no exemptions required Yes

S:A-‐ON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No




S:A-‐ON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON CCadmium and yellow chromate


S:A-‐ON CICadmium and clear chromate


S:A-‐ON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

S:A-‐ON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON X No FinishCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

S:A-‐ON ZB Zinc and black chromate


S:A-‐ON ZC Zinc and yellow chromate


S:A-‐ON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

S:A-‐ON ZTZinc and clear chromate, 96 hr.


S:A-‐OTHER BN Black NitrideCompliant with no exemptions required No

S:A-‐OTHER BO Black OxideCompliant with no exemptions required No

S:A-‐OTHER BZ Zinc and blue dyeCompliant with no exemptions required No

S:A-‐OTHER CCadmium and yellow chromate


S:A-‐OTHER CICadmium and clear chromate





S:A-‐OTHER CN Bright nickel over copperCompliant with no exemptions required No

S:A-‐OTHER CU Copper flashCompliant with no exemptions required No

S:A-‐OTHER DT Matte TinCompliant with no exemptions required No

S:A-‐OTHER ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

S:A-‐OTHER ET ElectrotinCompliant with no exemptions required No

S:A-‐OTHER X No FinishCompliant with no exemptions required No

S:A-‐OTHER X17 Zinc and clear dyed yellowCompliant with no exemptions required No

S:A-‐OTHER ZB Zinc and black chromate


S:A-‐OTHER ZC Zinc and yellow chromate


S:A-‐OTHER ZI Zinc and clear chromateCompliant with no exemptions required Yes

S:A-‐OTHER ZTZinc and clear chromate, 96 hr.


SCB ZI Zinc and clear chromateCompliant with no exemptions required Yes

SCBJ ZI Zinc and clear chromateCompliant with no exemptions required Yes

SCBR ZI Zinc and clear chromateCompliant with no exemptions required Yes

SF ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

SFK ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

SFP None No finish suffixCompliant with no exemptions required Yes

SFW LZ

Zinc w/ clear trivalent chromate + sealant/lubricant

Compliant using exemption for up to 0.35% lead in steel Yes

SFW ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel No

SGPC None No finish suffixCompliant with no exemptions required Yes




SKC None No finish suffixCompliant with no exemptions required Yes

SL:A-‐ON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON CCadmium and yellow chromate


SL:A-‐ON CICadmium and clear chromate


SL:A-‐ON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SL:A-‐ON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON X No FinishCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐ON ZB Zinc and black chromate


SL:A-‐ON ZC Zinc and yellow chromate


SL:A-‐ON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

SL:A-‐ON ZTZinc and clear chromate, 96 hr.


SL:A-‐OTHER BN Black NitrideCompliant with no exemptions required No

SL:A-‐OTHER BO Black OxideCompliant with no exemptions required No

SL:A-‐OTHER BZ Zinc and blue dyeCompliant with no exemptions required No




SL:A-‐OTHER CCadmium and yellow chromate


SL:A-‐OTHER CICadmium and clear chromate


SL:A-‐OTHER CN Bright nickel over copperCompliant with no exemptions required No

SL:A-‐OTHER CU Copper flashCompliant with no exemptions required No

SL:A-‐OTHER DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SL:A-‐OTHER ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SL:A-‐OTHER ET ElectrotinCompliant with no exemptions required No

SL:A-‐OTHER X No FinishCompliant with no exemptions required No

SL:A-‐OTHER X17 Zinc and clear dyed yellowCompliant with no exemptions required No

SL:A-‐OTHER ZB Zinc and black chromate


SL:A-‐OTHER ZC Zinc and yellow chromate


SL:A-‐OTHER ZI Zinc and clear chromateCompliant with no exemptions required Yes

SL:A-‐OTHER ZTZinc and clear chromate, 96 hr.


SLPS BN Black NitrideCompliant with no exemptions required No

SLPS BO Black OxideCompliant with no exemptions required No

SLPS None No finish suffixCompliant with no exemptions required Yes

SMPS None No finish suffixCompliant with no exemptions required Yes

SMTPR DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SMTPR ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SMTPR ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes




SMTRA DT Matte TinCompliant with no exemptions required No

SMTRA ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SMTRA ET ElectrotinCompliant with no exemptions required Yes

SMTSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SMTSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SMTSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel Yes

SO BN Black Nitride

Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. No

SO BO Black Oxide


SO BZ Zinc and blue dye


SO CCadmium and yellow chromate


SO CICadmium and clear chromate





SO CN Bright nickel over copper


SO CU Copper flash


SO DT Matte Tin


SO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SO ET Electrotin





SO X No Finish


SO X17 Zinc and clear dyed yellow


SO ZB Zinc and black chromate


SO ZC Zinc and yellow chromate


SO ZI Zinc and clear chromate

Type SO fasteners with appropriate finish are compliant. The specific part number and date of manufacture can determine whether the product is either lead free or compliant using the exemption for up to 0.35% lead in steel. Yes




SO ZTZinc and clear chromate, 96 hr.


SO4 BN Black NitrideCompliant with no exemptions required No

SO4 BO Black OxideCompliant with no exemptions required No

SO4 None No finish suffixCompliant with no exemptions required Yes

SOA None No finish suffixCompliant with no exemptions required Yes

SOAG None No finish suffixCompliant with no exemptions required Yes

SON BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

SON BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

SON BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

SON CCadmium and yellow chromate


SON CICadmium and clear chromate


SON CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

SON CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

SON DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SON ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SON ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

SON X No FinishCompliant using exemption for up to 0.35% lead in steel No

SON X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No




SON ZB Zinc and black chromate


SON ZC Zinc and yellow chromate


SON ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

SON ZTZinc and clear chromate, 96 hr.


SOS None No finish suffixCompliant with no exemptions required Yes

SOSG BN Black NitrideCompliant with no exemptions required No

SOSG BO Black OxideCompliant with no exemptions required No

SOSG None No finish suffixCompliant with no exemptions required Yes

SP None No finish suffixCompliant with no exemptions required Yes

SS BN Black NitrideCompliant with no exemptions required No

SS BO Black OxideCompliant with no exemptions required No

SS BZ Zinc and blue dyeCompliant with no exemptions required No

SS CCadmium and yellow chromate


SS CICadmium and clear chromate


SS CN Bright nickel over copperCompliant with no exemptions required No

SS CU Copper flashCompliant with no exemptions required No

SS DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SS ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SS ET ElectrotinCompliant with no exemptions required No

SS X No FinishCompliant with no exemptions required No




SS X17 Zinc and clear dyed yellowCompliant with no exemptions required No

SS ZB Zinc and black chromate


SS ZC Zinc and yellow chromate


SS ZI Zinc and clear chromateCompliant with no exemptions required Yes

SS ZTZinc and clear chromate, 96 hr.


SSA None No finish suffixCompliant with no exemptions required Yes

SSC None No finish suffixCompliant with no exemptions required Yes

SSS BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

SSS BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

SSS BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

SSS CCadmium and yellow chromate


SSS CICadmium and clear chromate


SSS CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No

SSS CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

SSS DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

SSS ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

SSS ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

SSS X No FinishCompliant using exemption for up to 0.35% lead in steel No

SSS X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No




SSS ZB Zinc and black chromate


SSS ZC Zinc and yellow chromate


SSS ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

SSS ZTZinc and clear chromate, 96 hr.


STKB None No finish suffix


STKC BN Black NitrideCompliant with no exemptions required No

STKC BO Black OxideCompliant with no exemptions required No

STKC None No finish suffixCompliant with no exemptions required Yes

TA None No finish suffixCompliant with no exemptions required Yes

TD X No FinishCompliant with no exemptions required No

TD ZI Zinc and clear chromateCompliant with no exemptions required Yes

TDO X No FinishCompliant with no exemptions required No

TDO ZI Zinc and clear chromateCompliant with no exemptions required Yes

TFH BN Black NitrideCompliant with no exemptions required No

TFH BO Black OxideCompliant with no exemptions required No

TFH BZ Zinc and blue dyeCompliant with no exemptions required No

TFH CCadmium and yellow chromate


TFH CICadmium and clear chromate


TFH CN Bright nickel over copperCompliant with no exemptions required No




TFH CU Copper flashCompliant with no exemptions required No

TFH DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

TFH ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

TFH ET ElectrotinCompliant with no exemptions required No

TFH X No FinishCompliant with no exemptions required No

TFH X17 Zinc and clear dyed yellowCompliant with no exemptions required No

TFH ZB Zinc and black chromate


TFH ZC Zinc and yellow chromate


TFH ZI Zinc and clear chromateCompliant with no exemptions required Yes

TFH ZTZinc and clear chromate, 96 hr.


TFHS None No finish suffixCompliant with no exemptions required Yes

TP4 None No finish suffixCompliant with no exemptions required Yes

TPS None No finish suffixCompliant with no exemptions required Yes

TPXS None No finish suffixCompliant with no exemptions required Yes

TSO BN Black NitrideCompliant using exemption for up to 0.35% lead in steel No

TSO BO Black OxideCompliant using exemption for up to 0.35% lead in steel No

TSO BZ Zinc and blue dyeCompliant using exemption for up to 0.35% lead in steel No

TSO CCadmium and yellow chromate


TSO CICadmium and clear chromate


TSO CN Bright nickel over copperCompliant using exemption for up to 0.35% lead in steel No




TSO CU Copper flashCompliant using exemption for up to 0.35% lead in steel No

TSO DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

TSO ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

TSO ET ElectrotinCompliant using exemption for up to 0.35% lead in steel No

TSO X No FinishCompliant using exemption for up to 0.35% lead in steel No

TSO X17 Zinc and clear dyed yellowCompliant using exemption for up to 0.35% lead in steel No

TSO ZB Zinc and black chromate


TSO ZC Zinc and yellow chromate


TSO ZI Zinc and clear chromateCompliant using exemption for up to 0.35% lead in steel Yes

TSO ZTZinc and clear chromate, 96 hr.


TSOA None No finish suffixCompliant with no exemptions required Yes

TSOS None No finish suffixCompliant with no exemptions required Yes

U BN Black NitrideCompliant with no exemptions required No

U BO Black OxideCompliant with no exemptions required No

U None No finish suffixCompliant with no exemptions required Yes

UL CW Carbo waxCompliant with no exemptions required Yes

WN BN Black NitrideCompliant with no exemptions required No

WN BO Black OxideCompliant with no exemptions required No

WN BZ Zinc and blue dyeCompliant with no exemptions required No

WN CCadmium and yellow chromate





WN CICadmium and clear chromate


WN CN Bright nickel over copperCompliant with no exemptions required No

WN CU Copper flashCompliant with no exemptions required Yes

WN DT Matte TinCompliant using exemption for up to 0.35% lead in steel No

WN ES Electrosolder, 60/40 Sn/PbNot compliant because finish contains lead No

WN ET ElectrotinCompliant with no exemptions required No

WN X No FinishCompliant with no exemptions required No

WN X17 Zinc and clear dyed yellowCompliant with no exemptions required No

WN ZB Zinc and black chromate


WN ZC Zinc and yellow chromate


WN ZI Zinc and clear chromateCompliant with no exemptions required No

WN ZTZinc and clear chromate, 96 hr.


WNS None No finish suffixCompliant with no exemptions required Yes

YXXNONSTANDARD Non-‐Standard Type

Non standard type, please e-‐mail [email protected] for further assistance No

ZIFC BN Black NitrideCompliant with no exemptions required No

ZIFC BO Black OxideCompliant with no exemptions required No

ZIFC None No finish suffixCompliant with no exemptions required Yes

ZZXNONSTANDARD Non-‐Standard Type

Non standard type, please e-‐mail [email protected] for further assistance No

rohs lookup 212 - pennengineering · pennengineering(–rohs(compliance(chart(–212 page%3%of%49...

Documents