Roller PressJumbo Compactor

The roller runs back and forth in an open-top container, compacting

your waste with a payload of up to 10 tonnes, simply and economically.

The Roller Press Jumbo Compactor has been proved successful with pallets, heavy duty crates,

fibreglass mouldings and many other difficult materials. Why pay your removal contractors

to remove 80% air-filled skips?

Ideal for large volume applications: • Wholesale markets • Councils • Industry • Transfer stations • C.A. Sites • Food distribution centres • Recycling centres

Specification

weight of compacting-drum 1550 daN

width of drum 1700 mm

diameter of drum 900 mm

roller-travel-limit 6500 mm, adjustable

required headroom 6600 mm

total space required width 2800 mm + width of roll-on-off container length 1850 mm plus coverall length of container

total weight ~ 3460 daN

motor 400 V / 50 Hz 5,5 kW

voltage of switchbox 24 V

fusing / plug for E-supply 32 A slow , cekon-plug 5 pin

ADVANTAGES for your BUSINESS

• compactsbulkygarbageefficiently,layerbylayer

• high container-loads due to even compaction

• easy to operate

• rollway up to 7 meters long

• great variety of roller-teeth available

• designedtofitcontainers3.1meteroverallheight

APPROX.FILLINGWEIGHTOFTHEC40CBM=6.5to7.5TONS!

The Cobalt Rotopress can be operated in all standard containers (max height 2700 mm). The minimum level of waste inside container must be 500 mm. The container is centered and guided by steel-tracks which are attached to the machine.

FRONT VIEW REAR VIEW