rolls royce-03.contr.syst 1p_02.06.09 icon dp2_tcm92-12985
TRANSCRIPT
-
7/30/2019 Rolls Royce-03.Contr.syst 1p_02.06.09 Icon DP2_tcm92-12985
1/1
System topology
Icon DP2 system comprise two or more
operator stations, a redundant network
(Ethernet) and a triple redundant control
architecture. To enhance system safety andintegrity, interfaces to position reference
and sensor systems, power system and
thrusters systems are split into logical
groups based on Class requirements and
system segregation.
Control cabinet
provides the interface to the surrounding
sub-systems in a DP2 system, such as
propellers/ thruster, sensors, reference
systems, power system etc. Rolls-Royce
marine controllers execute the DP
application and handle interfaces. The
triple redundant Icon DP2 system can beprovided either as one cabinet or as three
stand-alone cabinets.
Operator stations
The operator stations have a display with
a touch-screen interface, a positioning
device and a joystick device. Additional
touch-screen is available as an option for
Rolls-Royce operators chair.
2009 Rolls-Royce plc
Whilst this information is given in good faith,
no warranty or representation is given concerning such
information, which must not be taken as establishing
any contractual or other commitment binding upon
Rolls-Royce plc or any of its subsidiary or associated
companies.
Rolls-Royce Marine AS
Control - Aalesund
Service Box 22,
N-6025 Aalesund,
Norway
Tel: +47 815 20 070 Fax: +47 70 10 37 01
www.rolls-royce.com
03.C
ontr.
syst-1
of1-
02.0
6.0
9
Fact Sheet
Icon DP 2 - dynamic positioning systemA positioning product from Rolls-Royce
General system description - DP class 2
Unit Function Size(wxHxD)/Installation
Control cabinet Alt.1: Three stand alone DP control unit 800x1200x300mm (each)
Alt.2: Three modules in one cabinet 1000x1400x300mm /
comprising power supply, application controllers, wheelhouse or instrumentation roomI/Os for sensors and ref. systems. Serial line
interface to Rolls-Royce thruster controls.
Interface cabinet HIL/Simulation + 2x PMS + 2x steering gear 600x600x210mm / instrumentation room
Interface cabinet 6x thrusters + 2x steering gear + 2x switch board 600x600x210mm / instrumentation room
Operator station Standard 19 touch-screen Desk top mount with adjustable arm
(two or more) Mounting plate with CPU and terminals 400x600x210mm / inside control desk
Operator station - compact 10 touch-screen w/ integrated display computer Desk top mount with adjustable arm
DP joystick and DP positioning DP operation control devices with integrated push Desk top or operator chair arm rest drop in
device for operator station buttons and LED indicator lamps. Cut out: 90x120mm (oval) - dept 120mm
UPS - dual w/integrated batteries UPS status displayed at DP OS 560x800x880mm weight 220kg / instr. room
Operation mode switch Panel with switch and indication lights 195x125mm - dept 130mm/ Desk top drop in.
(DP switch) Mounting plate w/ relay and terminals 150x220x180mm/ inside control desk
Sensors and reference systems according to customer requirements. All types available
Manoeuvring mode
selector switch
DP operator stations
Sensor and
position referencesystem groups
Control cabinets
Uninterruptible
power supplies
Thrust devices
DP network