roof boots

8
The Marco Pipe Flashing System RoofBoots • Easy, on-site customization • Maximum resistance to ozone/ ultraviolet weathering • Flexible base forms seal with most panels • EPDM or Silicone sleeve accommodates expansion/contraction • Lots of sizes and color choices • 20-year warranty • 35-year warranty available RoofBoots are made with clearly marked sleeves which can be cut on-site to easily customize and precisely fit the pipe diameter you need. The sleeves come in EPDM 500 and Silicone—designed for the maximum resistance to weathering due to ozone and ultraviolet light. The base on RoofBoots is flexible and designed to form a seal on all types of roofing surfaces (including metal, plastic, tile, and more), and on almost any panel configuration and roof pitch, regardless of the pipe location. So installation is simple: choose the pipe opening and trim the sleeve, slide the boot over the pipe, form to the roof profile, apply sealant, and fasten to complete the installation. You can also choose from round or square base, from Marco’s full selection of wraparound retrofit and solar boots, many sizes, and several color choices. High temperature RoofBoot shown here 20 YEAR WARRANTY Customizable, flexible sleeves that form a seal around pipes on all roofing surfaces

Upload: jonathan1479

Post on 06-Mar-2015

91 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Roof Boots

The Marco Pipe Flashing System

RoofBoots™

• Easy, on-site customization

• Maximum resistance to ozone/ultraviolet weathering

• Flexible base forms seal with most panels

• EPDM or Silicone sleeve accommodates expansion/contraction

• Lots of sizes and color choices

• 20-year warranty

• 35-year warranty available

RoofBoots™ are made with

clearly marked sleeves which can

be cut on-site to easily customize and precisely fit the pipe

diameter you need. The sleeves come in EPDM 500 and Silicone—designed for the maximum resistance to weathering due to ozone and ultraviolet light.

The base on RoofBoots™ is flexible and designed to form a seal on all types of roofing surfaces (including metal, plastic, tile,

and more), and on almost any panel configuration and roof pitch, regardless of the pipe location.

So installation is simple: choose the pipe opening and trim the sleeve, slide the boot over the pipe, form to the roof profile, apply sealant, and fasten to complete the installation.

You can also choose from round or square base, from Marco’s full selection of

wraparound retrofit and solar boots, many sizes, and several color

choices.

High temperature RoofBoot shown here

20yEar waRRanty

Customizable, flexible sleeves that form a seal around pipes on all roofing surfaces

Page 2: Roof Boots

3 4

21

5

Step-by-step installation

Choose the pipe opening and trim the sleeve

Apply sealant

Slide the boot over the pipe and form to the roof profile

Fasten to roof

Installation complete

Page 3: Roof Boots

Dark Blue

Terra Cotta

Gray

Dark Green

Light Green

Bright Red

Black

Light Blue

White

Brown

Squa

reRo

und

2.77" - 75.25"[See chart on following page for specific size

information and availability]

2.77" - 75.25"[See chart on following page for specific size

information and availability]

9 sizes / 10 colors

Specification Data EPDM 500 SILICONEADVANCED OZONE RESISTANCE tested 70 hours @ 500 pphm 70 hours @ 500 pphm HIGH TEMPERATURE RESISTANCETested to: intermittent +100°C (+275°F) +135°C (+275°F)Tested to: continuous +225°C (+437°F) +260°C (+500°F) Solar: Tested to: intermittent +135°C (+275°F) +260°C (+500°F) Solar: Tested to: continuous +100°C (+212°F) +225°C (+437°F) LOW TEMPERATURE RESISTANCE tested -55°C (-65°F) -74°C (-100°F) Solar Low Temp -50°C (-67°F) -74°C (-101°F)TENSILE SET maximum 10 MPa (1450 psi) 5 MP1 (700 psi)COMPRESSION SET maximum 25% 50%

Complete specification data and testing methods are available upon request.

EDPM / Silicone CompoundsAs part of a standard classification system for rubber products these general specifications present conservation engineering minimums which should be used for design criteria.

General recommendations must be tested for extreme applications.

edpm RoofBoots™ engineeRing specificationsAstm d2000 m3 bA 510 A1 b13 c12 f17 z1 z2 z3 z4 z5 z6 z7

gRade 3

type b General tes temp 100°cclass A Volume swell no req5 50 durometer (range)10 tensile 10 mpa (approx. 1450 psi)A14 Heat Aging 70 hrs @ 100°cb13 compression set 22 hrs @ 70°c max 25% Astm d395bc12 Ozone Resistance 70 hrs @ 50pphm Astm d1171 100% Quality Retentionf17 Low temperature brittleness 3 min @ -40°c pass Astm d2137 A, 9, 3, 2z1 55 durometer (specific target)z2 epdm (specific elastomer)z3 Horizontal flame Resistance, uL 94 Not to exceed 3"/minz4 Ozone Resistance Advanced Requirementz5 70 hrs @ 500pphm @ 100°f Accelerated Weathering Resistancez6 (u.V. Light), Astm G-53z7 tear Resistance, Astm d-624, die “d” Resistance to discoloration, Astm

silicone RoofBoots™ engineeRingAstm d2000 m4 Ge 505 A19 b37 c12 f19 G11 z1 z2 z3 z4

gRade 4

type G General tes temp 225°ccLAss e Volume swell max 80%5 50 durometer (range)05 tensile 5 mpa (minimum 725 psi)A19 Heat Aging 70 hrs @ 225°c change in Hardness max +10 pts change in tensile max -30% change in ultimate elongation max -30%b37 compression set 22 hrs @ 175°c max 50% Astm d395bc12 Ozone Resistance 70 hrs @ 50pphm Astm d1171f19 Low temperature brittleness 3 min @ -55°c pass Astm d2137 A, 9, 3, 2G11 tear Resistance, Astm d-624, die “b”z1 55 durometer (specific target)z2 silicone (specific elastomer)z3 Horizontal flame Resistance, uL 94 not to exceed 3"/minz4 Ozone Resistance Advanced Requirement 70 hrs @ 500pphm @ 100°f

Page 4: Roof Boots

pipe Range compound paRt # flashing details

#1 1/4"–2 1/2" Black EPDM RD101BE A Top opening diameter Closed (6.35–63.5) Grey EPDM RD101GG B Overall height 2.77" (70.4 mm) Red Silicone RD101RG C Base diameter 4.75" (120.7mm)

#2 1 3/4"–3" Black EPDM RD201BE A Top opening diameter 1.44" (36.6 mm) (44.5–76.2 mm) Grey EPDM RD201GG B Overall height 3.35" (89.7 mm) Red Silicone RD202RG C Base diameter 6.21" (157.7 mm)

#3 1/4"–5" Black EPDM RD301BE A Top opening diameter Closed (6.35–127 mm) Grey EPDM RD301GG B Overall height 3.64" (92.5 mm) Red Silicone RD302RG C Base diameter 7.74" (196.6 mm)

#4 3"–6 1/4" Black EPDM RD401BE A Top opening diameter 2.38" (60.5 mm) (76.2–158.8 mm) Grey EPDM RD401GG B Overall height 5.05" (128.3 mm) Red Silicone RD402RG C Base diameter 9.26" (235.2 mm)

#5 4 1/4–7 3/4" Black EPDM RD501BE A Top opening diameter 3.50" (88.9 mm) (108–196.9 mm) Grey EPDM RD501GG B Overall height 4.43" (112.5 mm) Red Silicone RD502RG C Base diameter 10.75" (273.1.7 mm)

#6 5"–9" Black EPDM RD601BE A Top opening diameter 4.25" (108 mm) (127–228.6 mm) Grey EPDM RD601GG B Overall height 5.60" (142.2 mm) Red Silicone RD602RG C Base diameter 12.50" (317.5 mm)

#7 6"–11" Black EPDM RD701BE A Top opening diameter 4.90" (124.5 mm) (152.4–279.4 mm) Grey EPDM RD701GG B Overall height 5.84" (148.3 mm) Red Silicone RD702RG C Base diameter 14.60" (370.8 mm)

#8 7"–13" Black EPDM RD801BE A Top opening diameter 5.80" (147.3 mm) (177.8–330.2 mm) Grey EPDM RD801GG B Overall height 7.53" (191.3 mm) Red Silicone RD802RG C Base diameter 16.5" (419.1 mm)

#9 9"–19" Black EPDM RD901BE A Top opening diameter 7.45" (189.2 mm) (228.6–482.6 mm) Grey EPDM RD901GG B Overall height 8.09" (205.5 mm) Red Silicone RD902RG C Base diameter 75.25" (641.4 mm)

pipe Range compound paRt # flashing details

Min. 1/8"–3/4" Black EPDM SQ051BA A Top opening diameter 1/16" (3–20 mm) B Cut to suit pipe size 1/8"–3/4" C Base diameter 2 1/4"

#1 1/4"–2" Black EPDM SQ101BA A Top opening diameter Closed (6–50 mm) Grey EPDM SQ101GA B Cut to suit pipe size 1/4"–2" Red Silicone SQ101RA C Base diameter 4 1/4"

#2 1 1/4"–3" Black EPDM SQ201BA A Top opening diameter 7/8" (32–76 mm) Grey EPDM SQ201GA B Cut to suit pipe size 1 1/4"–3" Red Silicone SQ202RA C Base diameter 6"

#3 1/4"–4" Black EPDM SQ301BA A Top opening diameter Closed (6–102 mm) Grey EPDM SQ301GA B Cut to suit pipe size 1/4–4" Red Silicone SQ302RA C Base diameter 8"

#4 3"–6" Black EPDM SQ401BA A Top opening diameter 2 1/2" (76–152 mm) Grey EPDM SQ401GA B Cut to suit pipe size 3"–6" Red Silicone SQ402RA C Base diameter 10"

#5 4"–7" Black EPDM SQ501BA A Top opening diameter 3 1/2" (102–178 mm) Grey EPDM SQ501GA B Cut to suit pipe size 4"–7" Red Silicone SQ502RA C Base diameter 11"

#6 5"–9" Black EPDM SQ601BA A Top opening diameter 4" (127–228 mm) Grey EPDM SQ601GA B Cut to suit pipe size 5"–9" Red Silicone SQ602RA C Base diameter 12"

#7 6"–11" Black EPDM RD701BE A Top opening diameter 5" (152–280 mm) Grey EPDM RD701GG B Cut to suit pipe size 6"–11" Red Silicone RD702RG C Base diameter 14"

#8 7"–13" Black EPDM SQ801BA A Top opening diameter 6" (178–330 mm) Grey EPDM SQ801GA B Cut to suit pipe size 7"–13" Red Silicone SQ802RA C Base diameter 17"

#9 10"–18" Black EPDM SQ901BA A Top opening diameter 8 1/2" (254–467 mm) Grey EPDM SQ901GA B Cut to suit pipe size 10"–18" Red Silicone SQ902RA C Base diameter 25"

Max. 13"–26" Black EPDM SQ951BA A Top opening diameter 11" (330–660 mm) Grey EPDM SQ951GA B Cut to suit pipe size 13"–26" Red Silicone SQ952RA C Base diameter 34"

Sizing Chart Check diameter of pipe. Select the appropriate RoofBooTS™ product for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the RoofBooTS™ product desired.

Page 5: Roof Boots

Steep Slope

Specifically designed for the metal roof industry, for applications with a 35 to 65 degree angle, while accepting and responding to the most commonly encountered pipe penetrations.

The built in 40° pitch allow the Extreme Angle Master Flash to handle any extreme roof pitch, sleeve flexibility accommodates vibration and pipe movement caused by expansion and contraction. Easy on site customization handles all normal installations, too. Fast, one piece construction allows for easy on-site installation in usually 5 minutes.

Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. The soft aluminum base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

Steep Slope’s flexible design meets virtually all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. Steep Slope was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and mechanical Officials (for the uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with Type B vents. Listed with IAPMO certification No. 3121.

pipe Range compound paRt # flashing details

1/4" - 5 3/4" Black EPDM MFEA101BA A Top opening diameter Closed B Cut to suit pipe size 1/4" - 5 3/4" (6 - 146mm) Red Silicone MFEAS102RA C Base diameter 11" (279mm)

Made of EPDM or Silicone, these standard solar flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. A C-12 ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available.

With a pre-cut hole for pipe sizes 3/4" to 1" inch allowing minimal on-site preparation and assembly.The base is designed to form a seal on most panel configurations and roof pitch regardless of pipe location. The pitch canal allows for maximum flexibility, easily accommodating up to a 60 degree pitch without affecting the performance.

Multiport is specifically designed for Solar and Electrical Applications5 Port Design - One Design, Multiple Functions

Accommodates: 4-1/2” (114mm) BaseOne 0" - 1-15/16" - (0 - 49mm) Pipe Up to 4 cables or wires per flashingTwo 3/8" (0.9525mm) pipe / cable Extra ports accommodate copper pipe/electrical cablingTwo 3/4" (20mm) pipe / cable Easy install for solar applications

pipe compound paRt # flashing details

3/4"–1" Black EPDM MFSL A Top opening diameter 3/4" - 1" (19 - 25mm) B Overall height 2 1/2" (63mm)3/4"–1" Red Silicone MFSLS C Base diameter 4" (101mm)

pipe compound paRt # flashing details

0"-1 5/16" Black EPDM MFMP A Top opening diameter 0" - 1 5/16" (0 - 49mm) B Overall height 2 1/2" (63.5mm) Red Silicone MFMPS C Base diameter 4 1/2" (114mm)

Solar – Standard / Multiport

STEEP SLoPE

STEEP SLoPE

SoLar / MULTIPorT

Page 6: Roof Boots

titebond® Roof sealant is specifically formulated to outperform all other sealant technologies, including silicones, tri-polymers, and polyurethanes. this superior polymer formula provides a waterproof seal against water, wind, dust and dirt. It offers exceptional adhesion to Kynar™ coated metal surfaces, plastics and glass. the product is ideal for use on a wide variety of metal roof, trim, architectural metal siding, aluminum, galvanized steel, galvanized gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, brass and other common building substrates.

A trimmable joint and end lap sealing tape for metal roofing and wall jobs. Mastix is a high quality adhesive on a roll...the roll won’t telescope from heat before installation, and Mastix really holds hot metals. It’s made with a superior adhesive that’s non-staining and permanently flexible. Use it to provide an excellent seal around windows, doors, roof vents, stacks, access doors, and other penetration points... wherever you need to seal metal to metal.

Quikdrill metal-to-metal fasteners and QuikGrip metal-to-wood fasteners are the bedrock of the marco Weather-tite system. Quikdrill and QuikGrip offers you the right fastener for all pre-engineered metal building applications – any job, any size, any conditions, any environment.

both fastener families feature fasteners with a higher crown to allow a better, tighter socket fit, and cupped head and HWH for improved pullover strength. mechanical plating is standard with most fasteners, with stainless steel and zinc also available. No matter what your application or environment, there’s a coating that’s right for you. Whether it’s the matchtech painted coating or tripleGuard corrosion protection, marco has your fasteners covered from start to finish.

Ordering RoofBoots? For easy installation, don’t forget to order...

Page 7: Roof Boots

The Expanding Marco Weather-Tite System™

For nearly twenty years, Marco Industries™ has been delivering award-winning products to the metal building industry that offer easy installation, remarkable building ventilation, lower utility costs, extreme durability, and outstanding warranties...products that are economically and ecologically smart. Choose Marco for Everything you need to Make your Structure weather-tite.™

angLEkUT™

Custom Beveled Inside/Outside Closure

M-CLIPS™

Many clips and fastenersfrom which to choose

TITEbonD SEaLanTDurable & flexible

x-SEaL™ Expandable Foam tape

MaSTIx™

Butyl tape

WEaThEr-TITE DoorS™

Rolled Edge, Reliable Seal (5 models)

CLoSUrE FoaM™

Inside/Outside Closures with adhesive

rooF booTS™

Pipe Flashing

rE2™

non-warping, non-Corroding Reroof Retrofit Spacer

SILL-rITEMulti-use sill plate sealer provides a long-lasting seal

LP2™

Low Profile Vented Closure as ridge vent

QUIkgrIP™

Metal to wood fastener

FLEx-o-vEnT™

Flexible Foam Ridge Vent as universal ridge vent

QUIkDrILL™

Metal to metal fastener

Page 8: Roof Boots

To order: 1.800.800.8590 | MarcoIndustries.com | [email protected]

Marco Industries Corporate: 9410 E. 54th Street | Tulsa, oK 74145 | 1.800.800.8590 | fax: 1.918.622.4536

Marco Industries Canada: 1632 Broder Street | Regina, Sask S4N 7K1 | 1.866.244.7573 | fax: 1.306.775.0072041

RoofBoots™ represent yet another Marco Industries technological development in bringing you innovative, higher quality, and more economical products for the building industry.

MADE IN USA

Made withRecycled MateRial