roofing accessories - protect membranes...protect accessories for tile and slate roofs provide a...
TRANSCRIPT
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
CI/SfB (47) Uniclass Pr_25_93_72February 2019
ROOFING ACCESSORIES
2
ROOFING ACCESSORIES
ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROTECT SOLUTIONS
Protect accessories for tile and slate roofsprovide a range of solutions which offerbetter performance than the traditionalalternatives.
● Easier to install.
● More dependable.
● Reliably maintain the weatherprooffunction of the roof covering.
● Relevant products comply withrequirements of Dry Fix Standard BS 8612:2018.
page 3
4
5
6
7
8
9
10
11
THE PRODUCT RANGE
Fulmetal Rediroll Ventilated Dry Ridge/Hipis used with conventional ridge and hip tilesto provide both ventilation and weatherprotection.
AluFlash Lightweight Flashing is an environmentally-friendly alternative tolead; very lightweight and easy to formwithout specialist skills or tools.
Universal Dry Verge systemfor interlocking tiles; avoids the problems ofmortar verges, being easily dry-fixed,resistant to wind uplift and not subject tocracking.
DV Slate Dry Verge system for natural and artificial slates; offers thesame advantages as Universal Dry Verge.
Universal Dry Fix Valley Troughprovides a flush appearance with freedrainage; dry-fixed with all tiles and slates.
Univalley 125 Valley Troughprovides an open valley for clear drainage;dry-fixed with slates or mortar bedded withtiles.
Universal Bonding Stripprovides weather protection at the junctionbetween roofs on semi-detached orterraced houses, especially when re-roofingwith different materials.
OFV Eaves Skirtensures efficient water discharge into thegutter; avoids sagging and ponding and willnot rot.
G6 Solar Inlet terminal provides a reliable means of maintaining theintegrity of the roof covering where cablesor pipes pass through it, for example toprovide connections for solar heating orphotovoltaic panels.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FULMETAL REDIROLL VENTILATED DRY RIDGE/HIP
DescriptionProtect Fulmetal Rediroll is an innovativeuniversal dry-fixed ventilated ridge and hipsystem. Manufactured from aluminium, the FulmetalRediroll overcomes the durability andweathering problems associated withfabric-based systems.
ApplicationsA universal solution suitable for all ridgeand hip tiles and all roof tiles and slates.
Can be used to provide a ventilation areaequivalent to 5000mm2/m.
AuthorityCan be used to comply with roof spaceventilation requirements of BuildingRegulations Approved Document C2 and BS 5250.
Specification clause
Mechanically-fixedventilated ridge and hip.Provide mechanical fixingof ridge and hip tiles to BS 5534 together withhigh level roof ventilationby means of ProtectFulmetal Rediroll.Fixing system to suit anytile type on both ridgesand hips. Installcontinuously to provideventilation area equivalentto 5000mm2/m* to complywith Building RegulationsApproved Document C22004 amd. 2010 & 2013and BS 5250: 2011. Fix in accordance withmanufacturer’sinstructions.
*For plain wing angleridges please consultProtect Technical Services.
Advantages
● Provides ventilation between ridge tiles even on flat roof tiles and slates.
● All-aluminium construction is rot-proof.
● Ventilated, but driving rain resistant.
● Unique weatherproof design avoids theneed for ridge unions.
● Unique stainless steel clip systemprovides mechanical fixing of the ridgetiles and correct spacing to ensure aneven appearance.
● Screw sleeve to prevent light bleedbetween ridges (if required).
● Handy 6m pack contains all componentsneeded to install the system.
● Design life in excess of 30 years.
● Optional hip tile carrier also available.
● Complies with Dry Fix Standardrequirements BS 8612:2018.
Size300mm wide.
AppearanceColours: terracotta or grey to suit roofcovering.
Fulmetal Rediroll
passivated heavyduty steel screw
Ridge tile (not part ofsystem)
Fulmetal Rediroll with half roundridge and pantiles
FinishesColour: lead grey or terracotta.
Cross-corrugated finish*Designed for use where the flashing hasto be moulded over and around complexshapes such as profiled roof tiles andcorner junctions.
The unique cross-corrugation patternallows the AluFlash to curve and bend inmore than one direction at once.
Embossed finishDesigned for applications requiring lesscomplex shaping such as pitched roofvalleys, secret gutters, soakers for slatesand double-lap tiles, and box gutters.
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ALUFLASH LIGHTWEIGHT FLASHING
Specification clauseFlashings to be AluFlashsolvent lacquer-coatedaluminium sheet withadhesive butyl backing.Finish: embossed / cross-corrugated.AluFlash supplied by Protect Membranes, 2 Brooklands Road, Sale,Cheshire, M33 3SS.Telephone: 0161 905 5700,Fax: 0161 905 2085. Email:[email protected]
* patent applied for
Description, ApplicationAluFlash is a revolutionary andenvironmentally-friendly alternative to leadas a weathering flashing material forbuildings. It incorporates all the usefulfeatures of lead but eliminates those thatare undesirable.
It is aluminium-based and available in twounique surface finishes depending on theapplication.
Advantages
● Lightweight, easy and safe to handle.
● Minimum 30 year design life.
● Easy to form over a range of roof profileswithout the need for specialist skills ortools.
● Both elements of AluFlash have beendurability tested and have been used inEurope for over 10 years as flashingmaterials.
● Non-toxic. No potential hazards forinstallers and no contamination of run-off water.
● Environmentally friendly. Suitable forrainwater harvesting systems.
● 6% of the weight of code 4 lead,providing health and safety benefits forinstallers.
● AA fire rating, enabling unrestricted use.
● Integral self-adhesive backing eliminatesthe risk of wind uplift which might allowwater penetration.
● Recyclable backing sheet to keepadhesive clean until final installation.
● Highly durable surface finish which doesnot oxidise, stain or require patination oil.
● BM TRADA Certified, certificate numberCPS-015.
MaterialAluFlash is a combination of highly durablealuminium sheet with a solvent lacquerupper surface and an adhesive butyl backingwith high levels of tack to prevent wind uplift.
SizesRoll length: 5m.Roll widths: 150, 200, 250, 300, 350, 400,450, 500, and 600mm.Thickness: 4.1mm (cross-corrugated),0.65mm (embossed).
CPS-015
. . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIVERSAL DRY VERGE SYSTEM
Description, ApplicationThe Protect Universal Dry Verge system iscompatible with all interlocking metric sizedroof tiles and designed to overcome theproblems of traditional mortar bedding,such as cracking and long termmaintenance.
Its unique ambidextrous patented fixingmechanism locks the units in place whilstallowing lateral and vertical adjustment toaccommodate differing tile profiles.
Truly universal, the units are ambidextrousfor either left or right verges offeringsignificant advantages for ordering andstockholding purposes.
Universal Verge unit, right or left hand
Components
Specification clause
Install Protect UniversalDry Verge System at roofverges to providecontinuous cover overbatten ends and tiles toprotect against wind upliftand driving rain.System to includeambidextrous right or lefthand units and ridge endcaps in injectionmoulded UV stabilisedpolypropylene and EavesClosure in injectionmoulded polypropylene toexclude birds and largeinsects.Fix mechanically inaccordance withmanufacturer’sinstructions.
Angled Ridge Cap
Half Round Ridge Cap
Advantages
● Provides full wind uplift and weatherprotection.
● Mechanically fixed, no maintenancerequired.
● Quick and easy to fix, no special skills ortools required.
● All weather fixing, no adhesive or sealantsrequired.
● Compatible with all interlocking metricsized roof tiles at batten gauges from315mm to 345mm.
● Compatible with all mortar or dry fixedridge systems.
● Available in black, brown or grey in packs of 10.
● Retains the traditional steppedappearance of the roof tiles.
● Meets the requirements of BS 5534 formechanical fixing.
● Complies with NHBC standards forpitched roofs.
● Designed and developed under ISO 9001Quality Management Systems.
● UV and heat resistant.
● Prevents entry of birds and large insects.
● Unaffected by differential movement orsettlement
● Dry verge batten end clip availableseparately to ensure compliance with DryFix Standard BS 8612: 2018.
AuthorityCan be used to comply with BuildingRegulations.
Composition, ManufactureUnits, ridge end caps and eaves closureinjection moulded polypropylene.
. . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dry VergeBatten EndClip
Connected Verge units
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
. . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
DV SLATE DRY VERGE SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description, ApplicationThe Protect DV Slate Dry Verge system ismechanically fixed, and once installedprovides complete and continuous coverover batten ends and slates, protecting theverge from wind uplift and driving rain. Foruse with natural and artificial double-lapslates not exceeding 5mm thickness,including Redland Cambrian and MarleyMonarch.The system is designed to overcome theproblems of traditional mortar beddedverges, which may crack due to differentialmovement. Mortar will also crack and erodedue to weathering and eventually fall away,leaving vulnerable slate edges exposed.Roof verges are subject to high level winduplift and this will lead to loosening ofslates and eventual failure.
Advantages
● Provides full wind uplift and waterprotection.
● Self draining: any rainwater which entersthe system is carried away from the roofcovering and directly into the gutter.
● Modular construction: a single vergeextrusion, plus unobtrusive connectorunits and handed eaves stop ends, whichprevent ingress of birds.
● Quick fixing: completely dry-fixed andcan be installed in any weather. Noadhesive, sealant or special tools arerequired. The verge is fitted before layingthe slates.
● Requires no maintenance once installed.
● Allows for thermal movement: all fixingholes are slotted, and connector units and ridge end caps include gaskets which allow movement.
● Available in packs of 10.
● Complies with Dry Fix Standardrequirements BS 8612:2018.
AuthorityCan be used to comply with BuildingRegulations Approved Document C and BS 5534.
Composition, ManufactureExtruded PVC-U in 2.4m long sections.Ridge and end caps are vacuum-formed ABS. Connectors and stop ends areinjection-moulded polypropylene.All components are matt slate grey.
DV204 Ridge end capsIncorporating a gasketseal, and supplied withfixing bracket. For fibrecement ridge tiles only.
Half-round, for roofpitches from 221⁄2° to 45°
Plain angle, for dedicatedroof pitches of 221⁄2°, 25°,30°, 35°, 371⁄2°, 45°
Concrete or clay blockend ridges available frommost tile manufacturerscan also be used tofinish the gable end.
DV200 Dry Verge sectionlength 2440mm
DV201 Connector unit
Eaves stop endDV202 right handDV203 left hand
Dry Verge installation
25mm maximumbatten overhang
DV200 Dry Verge section
Slates
Protect VP400 Plus LRroofing underlay
Specification clause
Install Protect DV SlateDry Verge system at roofverges to providecontinuous cover overbatten ends and slates toprotect against wind upliftand driving rain. System toinclude extruded PVC-Uedge sections, preformedgasket-sealed ridge endcaps, and eaves stopends to exclude birds. Fix mechanically inaccordance withmanufacturer’sinstructions.
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIVERSAL DRY FIX VALLEY TROUGH
Description, ApplicationProtect has introduced an innovativesecond generation Universal GRP Dry FixValley Trough, adding to the extensiverange of Protect Dry Fix solutions. Dry fixing is quicker, less dependent on siteskills and guarantees a neater finish thanmortar bedding.
Advantages
● Universal - accommodates roof pitchesfrom 17.5º and above, and compatiblewith flat or profiled tiles and slates,providing a flush appearance.
● One size - 3 metres. Traditionally popularlength for speedy installation, readily cuton site.
● Positive fix to valley batten. Substantial25mm vertical weather check which alsoprovides strong fast fix to valley batten.
Specification clause
Install Protect UniversalDry Fix Valley Trough atroof valleys. Valley Troughto be GRP with gel coatfinish, with centralweather bar to assist freedrainage with secureprotection against wateringress. AB fire rating to BS 476:Part 3: 2004.
Mechanically fix inaccordance withmanufacturer’sinstructions.
Plain tiles or slates
Profiled tiles
Universal Dry Fix Valley Trough
Universal Dry Fix Valley Trough
underlay 200 x 12mmsupport board
nogging
battenrafter
● Unique shape assists with freedrainage with secure protectionagainst water ingress.
● Non-toxic and environmentally friendly.No potential hazards for installers andno contamination of run-off water.Suitable for rainwater harvestingsystems.
● No resale value to a prospective thief.
● Integral ‘Gel’ coat. Proven to provideincreased durability.
● Fire resistant. Designated AB fire ratingto BS 476: Part 3: 2004.
● Does not streak or stain tiles.
● Available in packs of 10.
Material and compositionUniversal Dry Fix Valley Trough ismanufactured from 1.2mm thick GRP in 3 metre lengths.
AppearanceColour: Lead grey.
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIVALLEY 125 VALLEY TROUGH
Description, ApplicationA valley is one of the most vulnerable partsof the roof - the Protect Univalley 125 GRPValley Trough provides a universal solutionfor valley detailing offering advantages ofeconomy and performance over valley tiles,concrete troughs and lead valleys.
The Protect Univalley 125 incorporatesmany design features and has beendeveloped as a universal product for easeof installation, simplified stockholding andminimum wastage.
Tests undertaken by Brunel University,Uxbridge, show that a clear water channelof 125mm is necessary for roof drainageareas greater than 25 square metres.
Compatible with either slates or tiles theUnivalley 125 has a 125mm clear waterchannel to ensure optimum performanceand incorporates a ‘gel’ coat, proven toprovide increased durability.
Advantages
● Universal for slate or tile. Can be dry fixedwith all slates including Redland Cambrianand Marley Monarch or wet bedded withall concrete and clay roof tiles.
● One size – 3 metres. Traditionally popularlength for speed of installation, withuniversal width. Readily cut on site.
● Integral mortar retention check. Holds ‘green’ mortar preventing slippageinto open valley during fixing. Providessecondary weather bar against rainpenetration.
● Positive fix to valley batten. Substantial25mm vertical weather check which alsoprovides strong fast fix to valley batten.
● Resin bonded wide mortar grips. Ensures maximum adhesion for mortar.
● Deep valley section and shape. Secureprotection against water ingress. MeetsLSA and Brunel University requirements.
● Integral water slew prevention bar. Tested to enhance water dischargeallowing use with dissimilar roof pitchesup to 15 degrees difference.
● Integral ‘Gel’ coat. Proven to provideincreased durability.
● Fire Resistant. Designated AB rating toBS 476: Part 3: 2004.
● Available in packs of 10.
tile batten
valley batten
slates
Univalley 125 trough
tiles
mortar retention check
water slew prevention bar
resin-bondedmortar grip
support board
nogging
rafter
Protect A1 roofing underlay
125mm clear water channel
Application showing both slate and tile
Specification clause
Install Protect Univalley125 Valley Trough at roofvalleys. Valley trough to beGRP with gel coat finish,provide 125mm wideclear water channel, andincorporate water slewprevention bar, waterchecks, mortar retentioncheck and resin bondedmortar grips. Fix inaccordance withmanufacturer’sinstructions.
mortar bedding ontoresin-bonded grip
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UNIVERSAL BONDING STRIP
Description, ApplicationThe Protect Universal GRP Bonding Stripprovides even greater protection at thejunction between old and new roofing onsemi-detached or terraced properties.
The design incorporates many features toprovide an effective and economicalsolution to the problem of weathering thejunction at party walls when properties arere-roofed at different times withincompatible materials.
Advantages
● Universal design. Can be fitted with anycombination of double lap or interlockingslates, clay and concrete tiles.
● Design ensures slates don’t ‘kick up’.Improves weather resistance. Enhancesappearance of roof.
● Secret or open gutter for efficientdischarge of water. Unobtrusive forsheltered locations.
Specification clause
Install Protect UniversalBonding Strip at junctionbetween old and newroofing. Bonding strip tobe GRP with gel coatfinish, and to incorporate agutter channel 75mm widewith 20mm upstands,10mm secondary stormbars, and mortar channelswith resin bonded mortargrips. Fix in accordancewith manufacturer’sinstructions.
● Positive gutter size (meets LSArequirements). 75mm wide gutter channelwith 20mm upstands. Ensures swiftdischarge of rainwater.
● Independent mortar fixing positions. Resin bonded for maximum adhesion.Allows for differential movement betweendissimilar roof materials.
● Design prevents battens being carried overdivision wall. Meets the requirement of BS 8000 (workmanship) for firebreak walls.
● Secondary 10mm storm bars. Enhancedweatherability.
● Integral mortar retention. Holds ‘green’mortar preventing slippage into opengutter during fixing.
● Integral ‘Gel’ coat. Proven to provideincreased durability.
● Dry fix option. Slates can be dry fixedwithout the risk of water penetration.
● One size – 3 metres. Lightweight, easy tohandle, readily cut on site.
● Fire resistant. Designated AB rating toBS 476: Part 3: 2004.Can be used in a fire separation wall detail.
● Available in packs of 10.
party wall
Universal Bonding Strip
Existing roof - slates
existing underlay
New roof - tiles
mortar bedding ontoresin-bonded grip
tiling battens cut back toprovide fire break
rafter
Open gutter
Secret gutter
Universal Bonding Strip
resin-bondedmortar grip
75mm gutter channelwith 20mm upstand
secondary 10mmstorm bars
ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
. . . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .OFV EAVES SKIRT
Description, ApplicationThe Protect OFV Eaves Skirt replaces boththe underlay into the gutter and thetraditional tilting fillet. It is designed to avoidsagging and ponding of the underlaybehind the fascia and ensure correct waterdischarge into the gutter.
Advantages
● Avoids sagging and ponding and will notrot in the gutter unlike bitumenderivatives.
● Robust 1.5mm PVC-U construction resistsimpact and UV degradation over time.
● Prevents wind noise under load.
● For use with Glidevale 10mm or 25mmover fascia ventilators or directly ontofascia board.
● Flexible design allows access to thefascia board for fitting gutter brackets.
● Supplied in 1.5m lengths, 10 lengths perpack.
● Suitable for new build or refurbishmentapplications.
AuthorityCan be used to comply with BuildingRegulations Approved Document C and BS 5534.
Specification clause
Install Protect eaves skirtto avoid sagging andponding of underlaybehind fascia and ensurecorrect water dischargeinto the gutter. Eaves skirtto be extruded in UV-stabilised PVC-U toprovide a long termdurable solution.
Continuous Rafter Roll
OFV Eaves Skirt
Fascia
Continuous Rafter Roll
OFV Eaves Skirt
FV250 Over Fascia Ventilator
Gutter bracket
Fascia
Roofing underlay
OFV Eaves Skirt
FV100 Over Fascia Ventilator
Fascia
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . .ROOFING ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G6 SOLAR INLET TERMINAL
Specification clause
Install Protect G6(versatile/slate soaker/plain tile, delete asappropriate) inlet as partof the roof covering toprovide weatherprotected inlet[s] forcables or pipes asrequired.Fix in accordance withmanufacturer’sinstructions.
Anti-capillary bars enhance driving anddeluge rain resistance
Batten bearers providepositive stop againstbatten
Low profile cowl
Compressible foam filler providesdriving and deluge rain resistanceat junction with adjacent tiles
Integral AluFlash flashingensures positive andpermanent weathering
Nail fixing point
G6 for slates
Description, ApplicationThe Protect G6 Solar Inlet Terminal hasbeen designed to guarantee the integrity ofthe roof when cables and pipes are routedthrough the tiles/slates and roofingmembrane. Ideal for solar panel installations.
Advantages
● Versatile suits virtually all single lapinterlocking roof tiles*.
● G6 also available for slates (soaker baseplate) and plain tiles. Specific profilesavailable to order.
● Easy installation.
● Allows user defined holes to be drilled toaccommodate different cable/pipediameters.
● Five colours available: red, brown, grey,terracotta and red streak.
● Supplied with Underlay OpeningProtector.
● Low profile cowl for installation underretro fit photovoltaic panels.
● Compressible foam filler ensures drivingand deluge rain resistance.
● Designed and developed under BS EN ISO9001.
● Available in packs of 5.
*Not suitable for usewith Plain Tiles, ClaySingle Pantiles,Forticrete CenturionTiles, Goxhill GaelicTiles or InterlockingSlates.
Illustration shows G6 inlet for a tiledroof. Slate roof version has no needof foam filler or AluFlash.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GENERAL
References
England and WalesBuilding Regulations 2010
Approved Document C2 2004 amd. 2010 &2013 'Resistance to moisture'
Approved Document F1 2010 'Means ofventilation'
Approved Document H 2010 'Drainage andwaste disposal'
ScotlandThe Building (Scotland) Regulations 2004Technical Handbook Domestic BuildingsSection 3.15.3 'Control of condensation inroofs'
Northern IrelandBuilding Regulations (Northern Ireland) 2012Technical Booklet C 'Site preparation andresistance to moisture'. Section 7 'Roofs'
Republic of IrelandBuilding Regulations 2012Technical Guidance Document F'Ventilation' 2009. Section 2 'Condensationin roofs'
Code of practiceBS 5250: 2011 'Code of practice for controlof condensation in buildings'
Glidevale White Papers'The new roof ventilation provisionsexplained' 2006
'Well sealed ceilings explained' 2006
Other documents
BS 5534: 2014 'Slating and tiling forpitched roofs and vertical cladding - Codeof practice'
BS 8000-6: 2013 'Workmanship on buildingsites. Code of practice for slating and tilingof roofs and cladding'
BRE Report BR 262: 2002 'Thermalinsulation - avoiding risks'
BRE Digest 415 1996 'Reducing the risk ofpest infestations in buildings'
BRE IP 5/06 ‘Modelling condensation andairflow in pitched roofs’
Robust Details: 'Limiting thermal bridgingand air leakage: Robust construction detailsfor dwellings and similar buildings' 2001,DEFRA and DTLR, The Stationery Office
'Thermal and moisture performance ofpitched roofs' PiI project report 2005
Specification clausesSpecimen clauses are given on productpages. Most clauses require choices to bemade.For Protect roofing accessory products,add the following to every specification:‘All roofing accessories to be obtained fromProtect Membranes, 2 Brooklands Road,Sale, Cheshire M33 3SS. Tel: 0161 905 5700, Fax: 0161 905 2085,Email: [email protected]’For performance specifications, productnames and references may be omitted.
Technical adviceAdvice is available from our TechnicalDepartment on all aspects of roofingunderlays, roofing accessories and design.Contact [email protected].
Other products
Protect Buildtight® Airtightness range
Protect construction membranes, includingreflective technology
Protect VC Foil Ultra vapour control layer
Protect F1 floor protection membrane
SupplyProtect Membranes products are availablethrough stockists nationally.
910034 February 2019 4590
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROTECT MEMBRANES 2 Brooklands Road, Sale, Cheshire M33 3SS Tel: 0161 905 5700 Fax: 0161 905 2085Email: [email protected] Web: www.protectmembranes.com
Protect Membranes maintains a policy of continuous development and reserves the right toamend product specifications without notice.
A division of Building Product Design Ltd. Company Registration No: 3944123
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stockist’s stamp
ISO 9001 OHSAS 18001