roofing metal...the same as for zet®roof. zet®roof is the basic version of the zet® modular roof...

BLACHPROFIL 2 Sp. z o.o. 30-527 Kraków, ul. Nadwiślańska 11/139NIP: 6762431701, Regon: 121387608

metal

roofin

g

www.bp2.eu

www.bp2.eu

Technical Information

ContactTrapezoidal Sheets

5 6 7 864 Technical Information66 T767 T1468 T1869 T18 ECO70 T3571 T35 ECO72 T5073 T55

Flashing and Accessories

56 Flashings58 Accessories58 Roof Communication System 61 Ventilation Chimney and Roof Windows61 Skylights

76 Aluzinc and Galvanized Coatings77 Coated Steel Sheets78 Description of Coatings80 Coating Properties81 Coatings Availability82 Anti-condensation Coating 86 Colours88 List of Modular Sheets

90 Contact

2

Table of Contents

Steel Roof Tiles

Modular Steel Roof Tiles

Roof Panels

Steel Roof Gutter Systems

1 2 3 418 BETA® 22 ALFA®26 OMEGA® 30 GAMMA®

6 Technical Information ZET®8 ZET®Roof9 ZET®Look10 Colours12 Transport and Installation

36 Technical Information LAMBDA®38 LAMBDA® L3840 LAMBDA® L25

46 Technical Information INGURI® 47 Description of System Components50 Colours51 Charge Material

1

6 Technical Information zet®

8 ZET®Roof9 ZET®Look10 Colours12 Transport and Installation

modular steel roof tiles

www.bp2.eu6


Total width ~1212

Effective width 1150

37 230 20

Technical parameters [in mm]


Total width ~1212

Thickness of steel sheet 0,5

Total profile height 50

Height of forming 30

Module length 363 (batten spacing 350 mm)

Effective area (cladding) of a single sheet

0,805 m2

The main advantages of the ZET® modular tiles are:

+ “Z” type ribs making the screws and joints between the sheets become invisible,

+ guaranteed colour and structure repeatability,

+ precision level never before achieved of every element of roof system thanks to robotic, automated production line,

+ availability out of hand and option to make immediate dispatch to any location,

+ professional product packing and protection reducing the risk of damage during loading, transport and unloading,

+ cutting edge protection unavailable for traditional steel tiles against corrosion thanks to the “Z”-type ribbing (patent protected),

+ reduction of average use of screws. “Z”-type ribbing operates as a zipper, eliminating the needs of folding sheets in this place, therefore, screws that are required in competitive products become useless,

+ unlimited freedom in forming coverings and reduction of material waste to a minimum thanks to symmetricalness of a module,

+ dedicated processing and INGURI® gutter system complementing perfect roof system.


www.bp2.eu8


ZET®Look is the development of the ZET®Roof modular sheet roof tiles. With the benefits of the system’s basic version, this variant is characterized by total elimination of screws visible on the roof surface. Thanks to the advanced installation system, being at the same time extremely easy for assembly, screws are hidden under sheets which gives attractive, symmetrical roof covering without any visible fixing elements or assembly holes. This is the perfect solution where the greatest esthetics is required. Product technical parameters, packaging and protection are the same as for ZET®Roof.

ZET®Roof is the basic version of the ZET® modular roof tiles. Dynamics of shapes of slope geometry of the ZET®Roof modular steel roof tiles makes it perfect for modern, unconventional construction. Thanks to high ribbing similar to traditional ceramic roof tiles, it is widely used in renovated and monumental facilities. Great esthetics of this cladding is also achieved by hiding joints in shades created thanks to “Z”-type ribs and lack of screws on the ribbing surface.

ZET®Roof

2 cm

ZET®Look

4,5 cm

www.bp2.eu10


Material used for production of modular metal roofing tiles ZET® is a coating developed in close cooperation with leading manufacturer of lacquers for the best ironworks in Europe.

Long-term research of the previously used coatings and monitoring of customer needs, with particular attention to the demands of the roofers, helped us to combine so many different advantages in one product. HERCULIT® is a polyurethane-hardened polyester, with great resistance to all kinds of mechanical damage, and a thickness of 35 μm. Modular metal sheet roofing tiles ZET® made of HERCULIT® metal sheets mean 55 years of guarantee. Moreover, they are distinguished by repeatability of colours and coating structure.

Sheet metal, with both sides coated with275 g/m2 metallic zinc layer, an anti-corrosion coating and single-sided with an organic decorative coating. Their advantages include high resistance to mechanical damage and corrosion, excellent formability and high aesthetic qualities.

The metal is coated with a mat organic layer with a gritty texture and a 35 μm thickness. Available in 3 colours with the option to provide colours from outside of the basic colour chart. Modular metal sheet roofing tiles ZET® made of sheets with MAT 35 Standard coating are covered by 30-year long guarantee.

HERCULIT®

MAT 35 Standard

Colours !

The warranty becomes valid after online registration on www.zet-roof.eu.Specific warranty terms and conditions are stated in the warranty card.

CodeThicknessof coatings

Corrosion(resistance)

UV radiation(resistance)

Warranty period(years)

MAT 35 Standard [TK]

35 µm C3 RUV3 30*





HERCULIT® [HC]

35 µm C4 RUV4 55*

HC 3009 HC 7016 HC 8004 HC 8017 HC 9005

TK 23 TK 31 TK 33

Printing technology does not have the capability of reproducing coating colours precisely. The colours shown here are intended for the orientation purposes onlyand may vary from those of the coatings themselves.

!

*Applies to modular metal sheet roofing tiles ZET®

www.bp2.eu12

The ZET® modular steel roof tiles are symmetrical. they can be installed in any direction – with overlaps to the left or to the right. The selection of the installation direction may be a result of an aesthetic choice. Provide 350 mm spacing of laths.

12

34

56

78

910

11

1213

1415

16

17

12

34

56

78

910

11

1213

1415

16

17

Correct installation envisages keeping the sequence of sheets installation, as shown on the diagram (in case of installation from the right side). The correct installation method for the ZET® modular roof tiles is a staggered layout, in which

the rows of sheets are shifted in relation to one another. This solution is possible due to the symmetrical shape of the sheets. The advantage to this panel layout is the lack of four sheet joints. Furthermore, vertical joints are not continuous, improving

Screw fitting locations (for the ZET®Roof version).

Screw fitting locations (for the ZET®Look version)*.

* The first lath should be equipped with starting profiles for ZET®Look. (5 per each sheet). Profiles installed with spacing 230 mm (axes) must be aligned and the width of laths cannot be less than 8 cm.

the aesthetic effect. (Concerns installation of version ZET®Look and ZET®Roof).


Due to the design of the sheets (“Z”-type rib), the sheets cannot be lifted straight up from the package. Before lifting the sheet, it must be slid a few centimeters forward to avoid damaging the coating on the sheet below – see drawing.

Modular roofing tiles ZET® are delivered on non-returnable pallets. The cladding can be delivered without specialised transportation. A single palletcontains 264 sheets, equivalent to 212.5 m2 of effective cladding.

The pallet with ZET® modular roof tile sheets is covered by a protective cover. If the sheets are not all used after unpacking, the remaining sheets must be covered by the protective cover.

The standard accessories of ZET® modular roof tiles include versatile protective elements: styrofoam spacers (their shape accurately matches the form of the sheets), dedicated reusable cover with ties (to protect unused material), stretch film and straps.

Transport and Installation

Light modules enable easy handling by a single person (e.g. stairwell transport) without the need to employ specialised equipment.

www.bp2.eu14


18 beta®

22 alfa®

26 omega®

30 gamma®

steel roof tiles

2

www.bp2.eu18

+ it is possible to select the length of a module for the product: 350 or 400 mm

+ the most economic roof tile in the catalogue

+ a unique shape of the wave

15/35015/400

i

Steel Roof Tiles



Total width 1216

Thickness of steel sheet 0,5 - 0,6

Total profile height 33,5

Height of forming 15

Module length 350/400

Length of sheetmin. 500max. 5750

Weight of metal sheets with steel core ~ 4,5 kg/m2

Weight of metal sheets with aluminium core ~ 1,8 kg/m2

Length of an overlap, when separating metal sheets

150

33,5

230


18,5

www.bp2.eu20

Steel Roof Tiles

www.bp2.eu22

15/35015/40020/35020/400

+ the product offers the following module length

+ options: 350 or 400 mm + classic shape + two available heights of forming: 20 or 15 mm

i

Steel Roof Tiles



Total width 1183


Total profile height 38/43

Height of forming 15/20


Length of sheetmin. 460max. 6110




110

38/43

183,3


23

www.bp2.eu24

Dachówki BlaszaneSteel Roof Tiles

www.bp2.eu26

15/35015/40020/35020/400

+ recommended for roofs with a large surface area

+ a classic line, resembling ceramic tiles

+ the product offers the following module length options: 350 or 400 mm

i

Steel Roof Tiles



Total width 1180





Length of sheetmin. 500, max. 5750




150

47/52

140


32

www.bp2.eu28


www.bp2.eu30

25/35025/40030/35030/400

Steel Roof Tiles



Total width 1212





Length of sheetmin. 370, max. 6002




20


37230

25/30

2045/50

+ high ribbing: 25 or 30 mm

+ shape inspired by classic ceramic tiles

+ symmetric profile – reduction of scrap material

+ cutting in line with the wave shape – invisible sheet joints

i

www.bp2.eu32


roof panels

36 Technical Information lambda®

38 lambda® l3840 lambda® l25

3

www.bp2.eu36

The locking joints of the LAMBDA® panels may be cut on request in order to incorporate the folding for the starting flashing.

The optional LAMBDA® panel folding for the starting gutter flashing [codes: LWZ] increases installation speed and safety.

Note!When ordering panel versions with notches for foldingthe starting gutter flashing [codes: LW], the production system automatically adds 30 mm to the ordered panel lengths.

Note!Due to the deign of roof panels, the cladding sheets may become “wavy”. This is normal for this type of products.

!

!

It also positively affects the aesthetic value of the cladding (cut edge is not visible).

Roof Panels

The panels are available in two versions (LAMBDA® L38 and LAMBDA® L25) and are extremely versatile in shaping the cladding design. They are characterised by a simple and universal form with broad customisation possibilities for: seam height, total width, covering width, optional ribs. Such a wide selection of roof design options may either accentuate the traditional form of the building or result in a sleek and modern look, depending on the building type and selected material.

Numerous specification selection options enable accurate matching of the panel shapes to the roof construction and building character.

The use of a click lock joint enables quick and secure installation, the design of the panels results in hiding the fasteners, improving the overall aesthetics of the cladding.

Technical Information lambda

www.bp2.eu38

Code notch for folding (Code) fold for the starting flashing (Code)

L38.490P LW38.490P LWZ38.490P

L38.490R LW38.490R LWZ38.490R

L38.490T25 LW38.490T25 LWZ38.490T25

L38.490T58 LW38.490T58 LWZ38.490T58

L38.283P LW38.283P LWZ38.283P

L38.283R LW38.283R LWZ38.283R

L38.283T25 LW38.283T25 LWZ38.283T25

L38.283T58 LW38.283T58 LWZ38.283T58

lambda l38Roof Panels

38

Effective width 283

T25

T58T25

Effective width 490

RP

PR

T58

Optional ribs (height 1 mm):

P Without ribs

R Semi-circular ribs

T25 Box profile ribs width 25 mm


Product features: + two width options + optional notches for folding

+ optional fold for the starting gutter flashing

LAMBDA® L38 – technical parameters [in mm]

Glossary L.38.490 L.38.283

Seam height 38 38

Effective width 490 283

Total width ~522 ~314

Thickness of steel sheet 0,5–0,7 0,5–0,7

Length of sheet max. 10000

www.bp2.eu40

Code notch for folding (Code) fold for the starting flashing (Code)

L25.515P LW25.515P LWZ25.515P

L25.515R LW25.515R LWZ25.515R

L25.515T25 LW25.515T25 LWZ25.515T25

L25.515T58 LW25.515T58 LWZ25.515T58

L25.306P LW25.306P LWZ25.306P

L25.306R LW25.306R LWZ25.306R

L25.306T25 LW25.306T25 LWZ25.306T25

L25.306T58 LW25.306T58 LWZ25.306T58

L25.205P LW25.205P LWZ25.205P

L25.205R LW25.205R LWZ25.205R

L25.205T25 LW25.205T25 LWZ25.205T25

L25.205T58 LW25.205T58 LWZ25.205T58

lambda l25Roof Panels

25

Effective width 205

Effective width 306

Effective width 515

T25R

P

T58T25

T58T25

T58

RP

RP

Optional ribs (height 1 mm):

P Without ribs

R Semi-circular ribs



LAMBDA® L25 – technical parameters [in mm]

Glossary L.25.515 L.25.306 L.25.205

Seam height 25 25 25

Effective width 515 306 205

Total width ~547 ~337 ~236

Thickness of steel sheet 0,5 0,5 0,5

Length of sheet max. 8000

Product features: + three width options + optional notches for folding + optional fold for the starting gutter flashing

www.bp2.eu42

Panele DachoweRoof Panels

46 Technical Information inguri®

47 description of system50 Colours51 Charge material

Steel roof gutter systems

4

www.bp2.eu46

description of system components

11

12

20

19

10

1

2

4

3

9

76

5

8

13

14

15

16

17

1. Gutter2. Gutter support3. Inner corner4. Outer corner5. Corner cover6. Gutter fasteners7. Fastener stabilizer8. Gutter end cap9. Gutter outlet10. Drain pipe elbow11. Drain pipe12. Tee pipe13. Cleanout14. Spout15. Sleeve16. Drain pipe clamp half17. Pipe bracket for

anchors18. Bracket anchors19. Top rafter hooks20. Face hook

18

125/87150/100

Application of a right gutter system allows for effective water discharge from roofing, which is vital for its durability and functionality. It also protects the building’s façade from damages caused by moisture. INGURI® are complete gutter systems made from two-side coated steel of highest quality. All the systems’ elements are designed in a way that

INGURI 125/87INGURI 150/100

Technical Information inguri®

assures easy alignment and quick installation. The shape and depth of gutters assure effective water discharge, even during intense and long rainfalls.


www.bp2.eu48

GUTTER HOOKSGutter hooks are very importantelements of a gutter system. Their quality and durability is vital for the system’s endurance and proper functioning. Our offer includes two kinds of hooks in few length variants, which allows to select an optimum solution for any kind of roofing: � top rafter hook in 70, 160, 210 and

300mm variants; � face hook.

ACCESSORIESWe provide available accessories forgutter systems: interceptor gullies, spray lubricants, silicones, and priming lacquer.

PIPE BRACKET, PIPE BRACKET FOR ANCHORSWe offer two types of brackets: withmounting holes for any given fixingmethods or adapted for a dedicated joint.

BRACKET ANCHORSWe provide bracket anchors in hourlengths: 120, 160, 200 and 250 mm.

CLEANOUTThis element stops the leaves, feathersor twigs and enables their removalfrom the gutter system. This preventssystem blockages and maintains itsfull functionality.

DRAIN PIPEThe INGURI® system drain pipes areof 3 m/1 m lengths and 87 mm/100 m profiles. They carry waterdownwards. Fastening to the facadeis accomplished using dedicatedclamps maintaining proper distancefrom the wall.

GUTTER SUPPORTAn element for additional gutterfixing to the roof construction.Prevents gutter deformationsor breaking off due to increasedloads, e.g. snow sliding off the roof.

SLEEVEDrain pipes are joined using sleeves.Solid structure of this element assuresmaximum joint tightness.

GUTTER END CAP An element used to close thegutter at its ends. The offered caphas large depth, and comes witha seal.

DRAIN PIPE ELBOWDrain pipe elbow allows to shapethe gutter system with roofingand façade. The offered productis angled at 63°.

INNER CORNER, OUTER CORNER Aesthetic and functional gutterconnection in the building’s quoinsis possible thanks to our cornersystem. We offer outer and innercorners of a standard 90° angleor 135° angle.

CORNER COVERThe cover prevents water fromflowing over the corner.It is especially important for internalcorners, receiving large volumesof water from the valley gutter.It also has an aesthetic purpose.

GUTTERINGURI® gutter shape has beendesigned in a way that assures higheffectiveness of water discharge.It is deep and properly shaped,to receive water from roofingeven during intense rainfalls,eliminating the risk of overflowing.We manufacture gutters in standardlengths of 4 and 3 metres.

SPOUTThe exit part of the gutter systemis spout, which carries water off fromthe drain pipe. The offered producthas an angle of 63° and the followingdimensions: 87 mm or 100 mm.

TEE PIPEIf there is a need to carry water offfrom two drain pipes to the spout,a tee pipe should be applied.Our product allows to changethe angle of incline of the connectedpipe, which facilitates installation.

GUTTER OUTLETThe outlet receives water fromgutters and directs it to the drainpipe. This element’s design andproper assembly has large influenceon functionality of the wholesystem. The INGURI® gutter outletis properly matched with otherelements, which assures tightand durable structure. Availableversions: 125/87, 125/100, 150/100.

GUTTER FASTENERSSections of gutters, or gutterswith corners are connected usingdedicated fasteners. The INGURI®systems are equipped with clampfasteners (snap mechanism) thatassure durable connection, as wellas quick and easy installation.The fasteners are provided withseals in standard, which guaranteetightness of the joint. They are alsomade of steel sheet of identicalcolor as other elements of thesystem, adding to the overallaesthetics. Moreover, the fastenercomes with stabilizer, stiffening thejoint.


www.bp2.eu50

The material for the manufacturing of INGURI® gutters is supplied by recognized companies, which deliver the highest-quality steel in the form of Aluzinc sheet metal - galvanized and coated - constituting the input material for gutter production. A careful selection of the input material producer has a crucial impact on the quality and durability of a product. It is manifested in its resistance to corrosion and discolourations. Therefore, the INGURI® gutter systems are subject to a long warranty.

Charge material

Coated sheet section

Legend

Organic coating

Priming coat

Anti-corrosion coat

Metallic coating

Steel core

Colours Printing technology does not have the capability of reproducing coating colours precisely. The colours shown here are intended for the orientation purposes only and may vary from those of the coatings themselves.

It is a steel sheet double-side coated witha zinc-aluminium alloy in a processsimilar to hot dip galvanizing. That way, it meets the most stringent requirements regarding the resistance of steel sheets against atmospheric corrosion and corrosion in humid environments. It comes with an additional, Easyfilm® protective polymer coating, which also protects the steel edges in coils and improves the aesthetics of the surface.

INGURI ® pipes are manufactured from sheet with hot galvanized feed, whichafter chemical cleansing and undergoing passivation is coated with anti--corrosion coats and a decorative, organic coat. The sheet is 0,6 mm thick, withthe organic layer being material of high resistance to atmospheric conditionsand mechanical damage, as well as UV radiation that causes color loss.

The INGURI ® Systems are also manufactured from Aluzinc 185 sheets with additional double-sided polymeric Easyfilm® polymeric coating.

AZ

INGURI®

Aluzinc INGURI [AZ 185]

!





Aluzinc[AZ 185]

185 g/m2 C3 n/a. 15





INGURI[PUR/PUR]

50 µm C4 RUV3 30


RAL 3011

RAL 8017

RAL 7024

RAL 9002*

RAL 8004

RAL 9005

* Color RAL 9002 only available for the INGURI® 150/100 system.

Specific warranty terms and conditions are stated in the warranty card.

!

www.bp2.eu52


56 flashings58 accessories58 oof communication system61 Ventilation chimney and roof windows61 Skylights

Flashing and accessories

5

WIND BRACE I WIND BRACE II GUUTER BASKET OVER-GUTTER STRIP UNDER-GUTTER STRIP

NEAR-WALL WORKING I NEAR-WALL WORKING II TRAPEZOID RIDGE TILE BARREL-SHAPED RIDGE TILE WIDE RIDGE TILE BOTTOM OF THE TRAPEZOID RIDGE TILE

WIND BRACE EXTENSION SNOW GUARDS PANEL JOINT LAMBDA® HIP TILE ENDING STARTING PROFILE FOR ZET®Look

STARTING GUTTER FLASHING LAMBDA®

UNDER-RIDGE TILE WORKING LAMBDA®

www.bp2.eu56

85 25 30

27/38

40

22

h=8

3,5

25

27

120

49

22,560

105

100

35

230

175

7510

301

109

90

150

112 20

82

30

15

175 175

25 25

85

100

15

20

180

215

95

9070

20

60Ridge tiles and flashings are an indispensable part of every correct roofing. They prevent water and wind intrusion and improve the appearance of the roof. The flashings are made from sheets available in the same range of coatings and colours as the metal roofing tiles, trapezoidal sheets and roof panels we produce.

Flashing 20

120

137

15

85

85

180

20

130

90

62 100

196

70

15

20

15

85

15

80

20

45

130

40

15


www.bp2.eu58


Roof communication system

Accessories

The BLACHPROFIL 2® roof communication system is comprised of roof elements which, once installed, facilitate safe access to chimneys, ventilators and antennas. The access is available all year round, even when snow has accumulated on the roof. The BLACHPROFIL 2® roof communication system also eliminates the risk of mechanical damage (indenting) to the roofing.

All the elements listed are made of high-grade, galvanised and powder-coated steel. They guarantee a long service life, without the need to repaint or repair corrosion-related defects. They are constructed to bear heavy wind loads. The specially designed ribbed

Accessories are available to complete the BLACHPROFIL 2® offer. They enabling a roof or façade to be professionally assembled and protected. We stock products from renowned manufacturers on a permanent basis. Our offer includes:

+ tapes (including the expansion tapes),

+ seals, + fastening systems, + roofwork silicone, + ventilation chimney, + leak stoppers, + sealing tape, + roof membranes.

surface eliminates the effects of snow and icing, as well as preventing people moving about on the roof from slipping. The BLACHPROFIL 2® roof communication system is offered in a rich palette of colours, allowing colour synchronisation of theroofing, the chimney-sweeping benches and other structuralelements.

Our offer includes: + chimneysweep toe holds + chimneysweep foot-plates + snow guards

Printing technology does not have the capability of reproducing coating colours precisely. The colours shown here are intended for the orientation purposes only and may vary from those of the coatings themselves.

!

RAL 3004

RAL 8012

RAL 7016

RAL 8017

RAL 8004

RAL 9005

www.bp2.eu60

Skylights

Ventilation chimneys

Proper roof ventilation is crucial for the draining of excess steam from the building, thus preventing condensation in rooms.

Our offer includes ventilation chimneys and a complete set of accessories, which facilitatean air-tight installation on a roof slope, as well as additional elements: antenna penetrations and ventilators.

Each model of a ventilation chimney has been specifically adapted for installationon a particular type of roofing:

+ roof vents for low profile cladding, for BETA® and ALFA® steel roof tiles;

+ roof vents for high profile cladding, for OMEGA® steel roof tiles;

+ roof vents for the GAMMA® steel roof tiles and ZET® modular steel roof tiles;

+ roof vents dedicated for flat cladding, box profile sheets and LAMBDA® roof panels.

RAL 3009

RAL 8004

RAL 6020

RAL 8017

RAL 7016 RAL 7024

RAL 8019 RAL 9005

Skylights are trapezoid sheet profiles made of sun-ray permeable polycarbonate. They are used to light up buildings. Their great advantages include lower cost compared to their glazed counterparts, and the

option to install in cold halls. Available profiles: T18, T18 ECO, T35.

The chimneys in our catalogue are also available in the version with additional insulation that prevents condensation of steam inside a ventilation duct. They are particularly recommendedfor the ventilating of rooms with high humidity concentrations, such as kitchens, bathroomsor garages.

Roof windows: installing BLACHPROFIL 2® roof windows allows for loft space to be developed, providing its complete illumination. There are BLACHPROFIL 2® windows to satisfy our clients’ requirements and expectations, regardless of the angle of incline or the distance of the rafters. We also offer special windows for rooms with higher moisture levels and

very low angles of incline, as well as electronically-controlled windows. The possibility of rotating the window simplifies the cleaning process, while the appropriate protection of the wood, carried out during the production process, guarantees a long service life, without the need for additional maintenance.


!

664 Technical Information66 t767 t1468 t1869 t18 eco70 t3571 t35 eco72 t5073 t55

TRAPEZOIDAL SHEETS

www.bp2.eu64

Technical InformationTrapezoidal sheets are products that, owing to their versatility, find wide application in the construction industry.

They are perfect as roofing and facade cladding for the smallest buildings (garages, canopies) and for large production buildings or commercial buildings. Our offering includes a wide product range, from economical solutions to structural sheets with deep corrugations, with parameters suitable for use in the most demanding industrial applications.

The products come in a wide range of colours and coatings, cut to individual requirements.

All box profile sheet types can be covered with an anti condensation coating. Trapezoidal sheets can also be perforated – the details can be arranged with the sales department.

Our website at www.bp2.eu has the option to download load charts and product data-sheets for all trapezoid sheet profiles available in our offer.

Additional elements of a trapezoid sheet metal systems in the roof version:

+ ridge tile and eaves gaskets + communication system + skylights + anti-condensation coatings + ventilation chimney

PerforationsWe provide the perforation of trapezoidal sheets. Details (shape, size, holes layout and others) are agreed upon individually with the sales department.

!

Trapezoidal Sheets

www.bp2.eu66

Trapezoidal Sheets

t7ROOF VERSION T7D

FAÇADE VERSION T7E


18 99117

84 33

D


84 33

18 99 117

E

t14ROOF VERSION T14D

FAÇADE VERSION T14E

100


56

73 27

44D

100


56

73 27

44E



Total width ~1210

Height of profile 7,0

Thickness of steel sheet 0,5–1,0

Max. length of sheet 6000



Total width ~1140

Height of profile 12


Max. length of sheet 8000

www.bp2.eu68

ROOF VERSION T18D



101

71 63

134


33 101

33

71 63134

D

E

t18Trapezoidal Sheets


40

30

37 117

155

71188

FAÇADE VERSION T18E-E

155


40 30

37117

188

71

ROOF VERSION T18E-D

D

E

t18 ecoTechnical parameters [in mm]


Total width ~1125



Max. length of sheet 12 000



Total width ~1173




www.bp2.eu70

Trapezoidal Sheets

t35


38 168

12185

30

34 206


30 38

121 8534

206


ROOF VERSION T35D

D

E

t35 eco

3220

270

180

90


FAÇADE VERSION T35E-E

32 20 270

18090


ROOF VERSION T35E-D

D

E



Total width ~1070






Total width ~1120




www.bp2.eu72

t50Technical parameters [in mm]


Total width ~1100




38

38

34

34

264

264

120

120

144

144




ROOF VERSION T50D

D

E

Trapezoidal Sheets

t55Technical parameters [in mm]


Total width ~1054






29

29

255

255

50

50

137

137

118

118

255

255


ROOF VERSION T55D

D

E

7

76 Aluzinc and galvanized coatings77 Coated steel sheets78 Description of coatings80 Coating properties81 coatings availability82 anti-condensation coating 86 Colours88 List of modular sheets90 Contact

Technical information and contact

www.bp2.eu76


Aluzinc and galvanized coatings

Sheet cross-section

LegendThese sheets are hot dip galvanised on both sides in a continuous process to protect the steel core against corrosion. Their surface may have a specific “flower” shape (in two types) or come without it. The version without the “bloom” have a smooth and uniform surface meeting the highest requirements for appearance.

It is a steel sheet double-side coated with a zinc-aluminium alloy in a process similar to hot dip galvanizing. That way, it meets the most stringent requirements regarding the resistance of steel sheets against atmospheric corrosion and corrosion in humid environments. It comes with an additional, Easyfilm® protective polymer coating, which also protects the steel edges in coils and improves the aesthetics of the surface. The warranty period for this type of sheet metal is 25 years.

GALVANISED SHEETS [ZN] ALUZINC [AZ]

Easyfilm®*

Metallic coating

Steel core

* Only Aluzinc

Coated steel sheetsCoated metal sheets are manufactured based on hot dip galvanization or coated with a dedicated alloy (zinc, zinc magnesium, zinc aluminium).This material is cleaned during chemical pre treatment, passivated and coated with multiple layers of one of the available coatings. This provides excellent protection of the

Coated sheet cross-section

Legend

Organic coating

Priming coat

Anti-corrosion coat

Metallic coating

Steel core

metallic layers and the steel core against weather factors. The coatings may havevarious thickness, colour and surface texture. Their warranty period is up to 55 years.

COATED STEEL SHEETS[INT, RAL, TK, TKep, HC, AL, ICep, HPS, PUR]

Specific warranty terms and conditions are stated in the warranty card.

! !Specific warranty terms and conditions are stated in the warranty card.For ZET®Roof and ZET®Look metal roofing tiles, the warranty becomes valid after registration online at: www.zet-roof.eu.

www.bp2.eu78


Description of coatings

POLIESTER Standard [RAL]

MAT 35 ZM[TKep]

MAT 35Standard [TK]

A basic organic coating with a thickness of 25µm, it has a uniform, smooth surface, glossy or metallic. This material has numerous applications. It comes in a rich palette of colours, designated using RAL, a universal colour matching system. Warranty period: 10 years.

Steel sheets double-side coated with a metallic zinc layer, anti-corrosion coat and single-sided with an organic decorative coating. Their advantages include high resistance to mechanical damage and corrosion, excellent formability and high aesthetic qualities. This sheet metal is coated with a mat organic layer with a gritty texture and a 35 μm thickness, available in 9 colours, with the option to provide colours from outside of the basic colour chart. Warranty period: 15 years.Guarantee period for ZET® - 30 years.

Visually identical to the MAT35 Standard version. However, it stands out due to the modernized protective coat - an innovative zinc-magnesium alloy (ZM) was used. The result is increased resistance to white and red corrosion in a C3 environment. Guarantee period: 30 years.

POLIESTERInterior [INT]

A metal sheet, coated with a 15µm polyester layer and having a smooth and glossy surface. The organic coating’s low level of thickness means that it is mainly intended for internal applications and constructional elements that are not directly exposed to atmospheric impact.

ICE COVER® ZM [ICep]

Thick (35 μm) organic foil with interesting crystalline texture resembling thick layer of paint. The core consists of a sheet covered with zing and magnesium alloy, which ensures better protection against corrosion. As a result, the material is more resistant to white and red corrosion in C3 environment.Guarantee period: 35 years.

It is a coating developed in close cooperation with a leading manufacturer of varnishes for the best steel mills in Europe. Long-term research of the previously used coatings and monitoring of customer needs, with particular attention to the demands of the roofers, helped us to combine so many different advantages in one product. HERCULIT® is a polyurethane-hardened polyester, with great resistance to all kinds of mechanical damage, and a thickness of 35 μm. It also retains high colour repeatability to provide consistent coating colour and structure. HERCULIT® means 40 years of warranty. Guarantee period for ZET® - 55 years.

HERCULIT®[HC]

Designed for production of any kinds of dry-wipe boards. Manufactured in thickness 0.40 mm and two widths - 1000 and 1200 mm based on galvanized core and coated with special varnish - Markerboard. Surface of gloss 80-90 GU and hardness 2H secured with protective foil.

Special surface of CHALKBOARD sheet 0.50 × 1000 mm, allows for writing with chalk and is protected with foil. It is produced based on galvanized core and coated with special varnish - Chalkboard.

MARKERBOARD[M]

CHALKBOARD[C]

Steel sheets combining steel and a 200 micron thick laminate with a finishing perfectly imitating wooden cladding. Additional protections with UV filters enable extended durability of the surface aesthetics. Available patterns are characterized by high compliance with laminates used by window framework manufacturers.

DECOR Coat[PVCF-DC]

HPS200 Ultra®[HPS]

Construction steel core protected with dedicated zinc and aluminium alloy, representing efficient anti-corrosion protection, also along cut edges. Thick organic coating (200 μm) of high resistance to scratches, mechanical defects and UV radiation. These sheets have the highest utility parameters and long guarantee. Aesthetic values are ensured by unique pressing of the decorative coating. Guarantee period: 40 years.

GRANITE®Storm [PUR]

This is a polyurethane mat coating of thickness 50 μm. Mat coating of grainy texture characterizes with perfect resistance to discolouring. Irrespective of roof arrangement and differences in UV exposure and atmospheric conditions across its surface, the coating maintains uniform colour on the whole surface. High resistance to impact and scratches reduces the risk of damage during transport and installation. Guarantee: 40 years.

Aluminium sheet coated with mat polyester varnish with a thickness of 25 microns. The application of products made from this material enables a reduction of covering weight even 2.5-fold. Available in 3 most popular colours with the option to provide colours from outside of the basic colour chart. Warranty period - 30 years.

ALUMINIUM[AL]

40 micron thick polyester varnish with a Z275 zinc or ZM120 zinc-magnesium layer, distinctive wood appearance and adequate protection against corrosion and UV radiation. Such a combination enables external application, particularly in cases requiring high resistance to weather conditions with simultaneous aesthetics.

SP35 Multilayer [SP35/MULTI]

Specific warranty terms and conditions are stated in the warranty card. For ZET®Roof and ZET®Look metal roofing tiles, the warranty becomes valid after registration online at: www.zet-roof.eu.

!

www.bp2.eu80


The list below is indicative.

Coating properties

Specific warranty terms and conditions are stated in the warranty card. For ZET®Roof and ZET®Look metal roofing tiles, the warranty becomes valid after registration online at: www.zet-roof.eu.

!


Corrosionresistance

Resistanceto UV rays


Galvanised [ZN]200 g/m2275 g/m2

C2 n/a. n/a.

Aluzinc [AZ 150] 150 g/m2 C2 n/a. n/a.

POLIESTER Interior [INT] 15 µm A2 n/a. n/a.

POLIESTER Standard [RAL] 25 µm C3 RUV2 10

MAT 35 Standard [TK] 35 µm C3 RUV3 15 [ZET®- 30*]

Aluzinc [AZ 185] 185 g/m2 C3 n/a. 25

MAT 35 ZM [TKep] 35 µm C3 RUV4 30

Aluminium [AL] 25 µm C3 RUV4 30

ICE COVER® ZM [ICep] 35 µm C3 RUV4 35

HERCULIT® [HC] 35 µm C4 RUV4 40 [ZET® - 55*]

HPS200 Ultra® [HPS] 200 µm C5 RUV4 40

GRANITE® Storm [PUR] 50 µm C5 RUV4 40

The possibility of making profiles with different coatings is negotiated individually with the sales department.coatings

availabilityi

Code ZNAZ 150

INT RAL TKAZ 185

TKep HC AL ICep HPS PUR

Thickness of coatings

200/275g/m2

150 g/m2

15µm

25µm

35µm

185g/m2

35 µm

35µm

25 µm

35 µm

200 µm

50µm

ZET®Roof, ZET®Look

BETA®, ALFA®, OMEGA®

GAMMA®

LAMBDA®

Trapezoidal sheets T7 up to T18 / T18 ECO

Trapezoidal sheets T35 up to T55

Trapezoidal sheets T62, T90

Trapezoidal sheets T80, T135, T153, T160

Sheets with MAT 35 ZM, Aluminium, ICE COVER® ZM and HPS200 Ultra® coating do not require painting to protect the cut edges.

*Applies to modular metal sheet roofing tiles ZET®

www.bp2.eu82


anti-condensation coating

Anti-condensation coating is applied on flat sheet strip before profiling. It provides perfect adhering across the whole roofing.

DR!PSTOP®anti-condensation coatingCondensation of water vapour is a phenomenon that occurs with uninsulated steel roofs. It can lead to the appearance of specific problems, such as corrosion, attic moisture, and damage to materials below. BLACHPROFIL 2® offers a simple, economical, and effective way to deal with ceiling drip: the application of DR!PSTOP® anti-condensation coating. This self-adhesive membrane is applied to the underside of the sheet metal. The main advantages of this technology are:

+ absorption of moisture appearing on the interior side of the roof resulting from water vapour condensation,

+ additional protection against processes of corrosion (especially in buildings with active chemical environments, such as livestock facilities),

+ higher resistance than standard insulation and steam barriers, does not degrade, resistant to tearing,

+ easy to clean using ordinary cleaning equipment (hose or pressure washer),

+ increase in acoustic insulation of roof,

+ non-flammable, resistant to bacterial degradation.

SOUNDCONTROL®sound-absorbing coatingThe use of the SUNDCONTROL® sound-absorbing coating on steel roof and facade coverings results in a significant improving of the level of acoustic insulating power. Consequently, the noise generated by atmospheric precipitation falling on the covering, and sound propagation inside the building, are reduced. Roof coverings with the SOUNDCONTROL® coating are applied in all types of facilities that require high acoustic standards, resulting from their size or purpose, such as: production halls, sports arena, agricultural facilities, and residential buildings. The SOUNDCONTROL® coating can also function as an anti-

condensation membrane, since it features very high properties, concerning moisture absorption.Installation guidelines and requirements concerning ventilation in the building are the same, as for the DR!PSTOP® anti-condensation coating described below.

DR!PSTOP® anti-drip coating is used in every type of construction with metal roofing. These include residential and industrial construction, sports facilities, farm buildings and every type of shelter and awning (such as petrol stations). We can use

12

Assembly guidelines:

Application

sheets with the DR!PSTOP® coating to manufacture any of the steel roof tile or trapezoid sheet profiles available in our offering. For roof panels installed on battens, we recommend using the SOUNDCONTROL® coating.

During the assembly, the DR!PSTOP® anti-condensation coating must be removed from places which do not allow for the outflow of moist air. Most of all, this applies to: 1. Fragments of roofing

directly above the wall and outside the building’s limits,

2. Places where sheets overlap – in case where the roofing consists of several sheets joined by length.

The process of vapour condensation begins when the atmospheric conditions reach the dew point – that is, when the temperature and humidity reach the point at which water in the atmosphere begins to form droplets. This typically occurs at sunset. At night, the water vapour drips from uninsulated roofing. The anti-condensation coating is a membrane with specially-designed pockets that trap water, on one hand preventing them from dripping, and on the other hand insulating the roofing from direct contact. During the day the moisture evaporates back into the atmosphere.

Properties

www.bp2.eu84


WARNING! Binding is permanent. DR!PSTOP® material cannot be removed and applied again. When using DR!PSTOP® on industrial buildings, it is

recommended to wash it with a fungicidal product at least once a year. During the roofing’s assembly the phenomenon of capillary action. Hence,

the DR!PSTOP® should be manually removed around the eaves and ridges (minimum clearance of 10 cm). The sheets with the applied anticondensation coating

Proper ventilation Chimney ensures outlet for moist air.

In the case of buildings, the phenomena of condensation may be exacerbated by the difference in temperature – the building interior remains warm while the outside temperature falls. The thermal conduction properties of steel roof covering causes greater condensation of water vapour from the warm interior on the inside of the roof covering. DR!PSTOP® guarantees effective protection of the roof covering and the materials below it by halting the dripping process.

In order for the DR!PSTOP® membrane to function properly, proper ventilation of the building is required. Because humid air is lighter than dry air, it collects under the roof. For the anti-condensation coating to evaporate and remove moisture during the day, ventilation of the moist air is necessary. This factor must be considered in design of the roof. As one of the solutions of building roof ventilation are the indications of the standard DIN 4108-3.

!should stick closely to the structure’s props and frames. Therefore, regardless of the profile, they should be mounted to the props in each lower wave.

Improper ventilationmoist air is not vented.

Evening timeCrossing the dew point cause water vapour to condensate on external part of the roofing.

Night timeThe DR!PSTOP coating absorbs and keeps condensate. Prevents water dripping as in case of non-protected roofing.

Day timeAnti-condensation coating evaporates humidity.

www.bp2.eu86

Colours Non standard colours and coatings, other than the ones in the presented range, are also available upon request.

TK 11

TK 23

TK 24

TK 27

TK 28

TK 31

TK 32

TK 33

TK 750

ALUZINC [AZ]

i

Standard sheet thickness is 0.5 mm

[0.6] Material also available with the thickness of 0.6 mm




Metallic coating

GALVANISED[ZN]

MAT 35 Standard [TK]


[0.6] - [1.0] [0.7][1.0]

MAT 35 ZM [TKep] ALUMINIUM [AL]

COLORCOAT HPS200 Ultra® [HPS]

Metal sheet boards

Veneered woodgrain steel sheets DECOR Coat [PVCF-DC]

Coated woodgrain steel sheets MULTILAYER [SP35/MULTI]

Marker Board [M]

Chalkboard [C]

HERCULIT® [HC] GRANITE® Storm [PUR]

TKep 11

HC 3009

Graphite [HPS 23]

TKep 23

HC 7016

Burano[HPS 28]

ICep 23

PUR 23

TKep 24

HC 8004

Vandyke brown

[HPS32]

ICep 28

PUR 31

TKep 28

HC 8017

Black [HPS 33]

ICep 32

PUR 33

HC 9005

Terracotta[HPS 750]

ICep 750

ICep 33

TKep 31

TKep 32

TKep 33

TKep 750

AL 24

AL 31

AL 33

SL55Wenge

E-502 Maho-gany

E-521Vegne

E-722 Golden Oak

E-726 MarschyOak

E-730Winchester

GO-4Golden Oak 3D

SL252 Winch-ester

SL59Dark Oak

SL65 Golden Oak


!

ICE COVER® ZM [ICep]

RAL 7016

RAL 9007

RAL 9010

RAL 1002

RAL 1015

RAL 1021

RAL 3000

RAL 3005

RAL 3009

RAL 3011

RAL 5008

RAL 5010

RAL 6005

RAL 6020

RAL 6029

RAL 7024

RAL 7035

RAL 8004

RAL 8017

RAL 8019

RAL 8023

RAL 9002

RAL 9005

RAL 9006

RAL 6011

[0.7] [0.7]

[0.7][0.7] [0.7][0.6][0.7]

[0.7]

[0.7][0.6][0.7][1.0]

[0.7][1.0]

[0.7]

POLIESTER Standard [RAL]

www.bp2.eu88

List of modular sheets


Module 350 mm Module 400 mm Number of modules

0,46 m 0,51 m 1

0,81 m 0,91 m 2

1,16 m 1,31 m 3

1,51 m 1,71 m 4

1,86 m 2,11 m 5

2,21 m 2,51 m 6

2,56 m 2,91 m 7

2,91 m 3,31 m 8

3,26 m 3,71 m 9

3,61 m 4,11 m 10

3,96 m 4,51 m 11

4,31 m 4,91 m 12

4,66 m 5,31 m 13

5,01 m 5,71 m 14

5,36 m

6,11 m max

15

5,71 m 16

6,06 m 17


0,50 m 0,55 m 1

0,85 m 0,95 m 2

1,20 m 1,35 m 3

1,55 m 1,75 m 4

1,90 m 2,15 m 5

2,25 m 2,55 m 6

2,60 m 2,95 m 7

2,95 m 3,35 m 8

3,30 m 3,75 m 9

3,65 m 4,15 m 10

4,00 m 4,55 m 11

4,35 m 4,95 m 12

4,70 m 5,35 m 13

5,05 m

5,75 m max

14

5,40 m 15

5,75 m 16


0,50 m 0,55 m 1

0,85 m 0,95 m 2

1,20 m 1,35 m 3

1,55 m 1,75 m 4

1,90 m 2,15 m 5

2,25 m 2,55 m 6

2,60 m 2,95 m 7

2,95 m 3,35 m 8

3,30 m 3,75 m 9

3,65 m 4,15 m 10

4,00 m 4,55 m 11

4,35 m 4,95 m 12

4,70 m 5,35 m 13

5,05 m

5,75 m max

14

5,40 m 15

5,75 m 16


0,37 m 0,42 m 1

0,72 m 0,82 m 2

1,07 m 1,22 m 3

1,42 m 1,62 m 4

1,77 m 2,02 m 5

2,12 m 2,42 m 6

2,47 m 2,82 m 7

2,82 m 3,22 m 8

3,17 m 3,62 m 9

3,52 m 4,02 m 10

3,87 m 4,42 m 11

4,22 m 4,82 m 12

4,57 m 5,22 m 13

4,92 m 5,62 m 14

5,27 m

6,02 m max

15

5,62 m 16

5,97 m 17

www.bp2.eu90

Contact Notes

All numerical values and physical and chemical properties of the products included in the catalogue are provided for orientation and visual purposes only. BLACHPROFIL 2® reserves the right to introduce improvements and changes to the technical parameters of the products. The catalogue may include mistakes or errors that occurred during editing and printing.

This catalogue is an invitation to submit an offer within the meaning of art. 14 paragraph 2 of the Convention on Contracts for the International Sale of Goods.Copyright © BLACHPROFIL 2® 2018. All rights reserved.

1. Alwernia near Cracow, Poland2. Dąbrowa Górnicza, Poland3. Timisoara, Romania4. Cluj Napoca, Romania

12

4

3

BLACHPROFIL 2® SP. Z O.O.

Manufacturing and Logistics Centre32-566 AlwerniaGrojec, ul. Grojecka 39

tel. +48 12 628 00 03fax +48 12 628 03 04e-mail: [email protected]

Production plant41-303 Dąbrowa Górniczaul. Budowlanych 10

tel. +48 32 213 33 10fax +48 32 213 33 66 e-mail: [email protected]

www.bp2.eu

S.C. IMPRO® S.R.L.

Manufacturing and Logistics CentreStr. Leonardo da Vinci nr 15Jucu Herghelie, TETAROM III Jud. Cluj

Production plant (Sandwich panels)DDN 59 km 8+550 m stânga,Parcul Industrial INCONTRO307221 Chișoda, Jud. Timiș.

www.impro.ro

roofing metal...the same as for zet®roof. zet®roof is the basic version of the zet® modular roof...

Documents