rotary scrubber

7/25/2019 Rotary Scrubber

1/14

Rotary Scrubber

Use for removingthe surface clayfrom the ore

The minimum feedsize of the ore is 2 .

The drum rotates atlow rpm 15-20 rpm.

The ore with waterppro! 50 to "0 #$% is fed

The angle lifterspush the oreforward to wardsthe discharge end.


2/14

%ust suppression in $rimary dump hopper


3/14

Apron Feeder

Used for handling large&oulders falling fromheight. with impact

'igh capacity feeding aprimary or secondarycrusher.

(t is used for heavy duty

application. (n lighter duty application it

is used for wet anda&rasive ore where otherfeeders cannot handle

pron feeder can &einclined or horizontal with

varia&le speedarrangement.

The material in apronfeeder is carried forward &ypans pulled &y sproc)etand &ull gear arrangement.


4/14

Circular motionVibrating screen

*ersatile sieving e+uipmentcapa&le of handling widerange of material for sizing.

,imitation of handling veryne particles and with highmoisture content.

The eccentric massmounted on a horizontalrotating shaft impartsoscillating circular motion.(t produces steep angle ofthrow to the particle lyingon the screen dec) which ishaving a down ward slopeof 150 to 220. degree

$arameters li)e shape &ul)density moisturecapacity are important forsize selection


5/14

Linear motionVibratingscreen ,inear or elliptical

motion screens are highperformance sievingmachine in terms ofcapacity and e/ciency.

(t is widely used in sizingdewatering de-sliming

or de-slurry (ngapplication.

The vi&ration is provided&y un&alanced motorsor eccentric shaftmatched &y gears.

The angle of throw is 0to "0 degree.

The water sprayingarrangement can &edone to enhance thener screeningarrangement.


6/14

$rimary rushing

econdary rushing

cru&&ing

creening

32-4 mm 4-1mm -1 mm

Tertiary rushing

oarse igging 6ine igging %e sliming cyclone

T7

Coarse JigConc

8ig9eect

8ig 9eect

oarsepirals 7an)

SpiralConc

:id;Tails

9e


7/14


8/14

9e


9/14

-1 mm 7eneciation


10/14

Ja Crus!er

rushing ta)es place&etween one !ed andone mova&le aw.

Used as primary >secondary crushingapplication.

8aw plate and side linersare of ustenitic :nsteel.

The uni+ue crushingwithout ru&&ing actionenhances the aw plate

life su&stantially 'igh processing capacity

'igh reduction ratio

9ugged ro&ust > 'eavyduty


11/14

ize control = (t is a tool for improvement of the size fraction inthe process stages and in the nal product. &ove 1-2 mm screens

in ner particles spiral classier or hydro cyclones are used


12/14

?nrichment- @ashing@ashing is the simplest method ofenrichment to improve the value of roc)and mineral.

@ashing using wet screens

cru&&er ttrition cells

Aravity &ed


13/14

?nrichment -separation

Aravimetric separation

6lotation separation

:agnetic separation ,eaching


14/14

Upgrading methods edimentation in thic)ener :echanical %ewatering

Thermal %rying

rotary scrubber

Documents