• 40' ft to 150' ft (12.2 - 45.7 m) five-section formed full power boom with quick-reeve boom head

• Three boom modes: A-max1, A-max2and standard boom lifting capacities

• Optional 31 ft to 55 ft (9.5 - 16.8 m) two-piecefly with offset of 2°, 25°, and 45°

• Optional two 15 ft (4.6 m) inserts plus 55 ft (16.8 m) two-piece bi-fold fly [Total attachment length of 85 ft (25.9 m)]

• 243 ft (74.1 m) maximum tip height

• No deducts for stowed attachments

• 21,022 lbs (9 535.4 kg) maximumwinch line speed

• 431 fpm (131.4 mpm) max line speed

• Pilot-operated hydraulic controllers

• 6x2 and 6x6 drive with 23.5x25 tires

• Four steering modes: independent front, combination, crab, independent rear

• Hydrostatic drive

• Fully independent double “A” arm hydraulic suspension

Rough Terrain Crane100-ton (90.72 mt)

80100RTC

SERIES II

The industry’s most innovativesolution to big rough terraincrane maneuverability andtransportability!

• Revolutionary hydrostatic driveon a six-wheeled carrier forthe ultimate in job site mobility

• Unprecedented transportability

• Maneuverability redefined

• Over 45 tons (40.8 mt) of on-tire capacity

CALC–Outrigger beams extend to three different positions (retracted, intermediate,and fully extended) providing lifting capacitiesin confined areas

Independent front Coordinated six wheel drive Six wheel "crab"Independent rear

Flat deck design and non-slipsurface strips on deck

Complete lighting package

Fast "hook-and-go" front &rear outrigger beams

Repositionable ladders onfront and back 23.5R25 radial tires

Stowable pontoons

The reach of the optional 55' (16.8 m) two-piece offsettable, bi-folding fly can be extendedby adding two optional 15' (4.6 m) inserts

80100RTC

SERIES II

Mechanical boom angleindicator-standard

Optional integrated airconditioning

Folding viewing mirror for travel

Rough Terrain Crane100-ton (90.72 mt)

Revolutionary hydrostatic drive ona 6-wheel carrierNot only is this crane easy to get from jobsite to jobsite, it also has extraordinary creep control andjobsite maneuverability, thanks to its hydrostatic powered motors in each wheel. The smaller tires giveit an overall height that is ideal for hauling, along with its’ individual six-wheel hydrostatic drive, there isno crane in the world, any size, that can come close to the job site maneuverability and performanceof the RTC-80100 Series II.

On the job, the RTC-80100 Series II has outstanding on-tire capacity coupled with its long reach,maneuverability, incredible gradeability and low height make it truly an ideal solution for industrial sites.

Partial counterweight andno counterweight charts

Catwalks on bothsides of upper

Because of the innovative 6x6x6 hydrostatic drive/steer on each wheel, the turning

radius of the 30' 10" (9.4 m) long carrier is a remarkable 22' 3" (6.79 m).

Removable auxiliary winchwith hydraulic disconnects

Winch viewing mirrors

Aluminum fuel tank

Pullout Cabwalk™

Powerfulhydraulics• Removable auxil-

iary (rear) winchhas hydraulic quickdisconnects

• For greater produc-tivity and control,multiple pumphydraulic circuitallows simultaneousfunction

• Piston winch motorprovides smoothand precise hoisting

• Main and availableauxiliary winch areequally matched insize and perform-ance

• Provisions for thefuture installation ofthe auxiliary winchare standard

Swing-out doors provide exceptional accessto engine components.

Access is superb with strategically-locatedladders, steps, catwalks and CabWalk.

Operator cab features• Extra large windows throughout for

excellent visibility• Excellent ventilation via a large sliding

door, side and rear windows, and hingedroof window

• 6-way adjustable seat• Single or dual axis, pilot operated

controller mounted on armrest for outstanding operator comfort

• All gauges, switches, indicators, and controls are located in the operator’s forward line of sight

• All gauges and switches are backlit forexcellent visibility in low light conditions

• Integral rated capacity limiter aids operator in safe and efficient operation

• In cab comfort is maintained by the standard heater

• Available - Internal and external ratedcapacity limiter light bars

• Available - Integrated air conditioning utilizes the same ventillation outlets as the standard heating system

• Available - cab mounted warning lights

cuthere

Õ

Õ

Õ

Õ

Amax2Amax1 Standard

Full power boom withattachment flexibility

Lightweight nylon head sheaves (includingthe optional auxiliary lifting sheave shown

here) reduce overall machine weightand increase lift capacities.

Hammerhead boom noseallows the operator to work

at high boom angles.

cuth

ere

Í

A-max modesThe exclusive A-max modes offer substantially increased capacities for in-close, maximum capacity picks,and provides the operator the capability to match the crane’s configuration to specific job site conditions.

• A-max1 - 95' (29 m): Inner and center sections are extended, offering maximum strength

• A-max2 - 122' 6" (37.34 m): Tip, outer and center sections are extended yielding maximum stability.

• The basic boom extension self-proportions all four sections equally

• Boom requires no greasing because of ingenious Teflon wear pucks impregnated in the full contact wear pads.

• Quick reeve boom head eliminates the need to remove the becket when it becomes necessary to change the reeving

• Three extends modes: A-max modes enhances both the structural and stability capability and fully synchronized for normal operation

• Available two-piece bi-folding lattice fly allows the tip section to be stored, thus enhancing the lifting performance when using the base section

• Four available fly options that feature three offset positions of 2°, 25°, and 45°

• No deducts for stowed attachments

228.5'(69.65 m)

214' (65.2 m)

243'(74.07 m)

190' (57.9 m)

Breakthroughtransportability• Unlike any other rough terrain crane in this class,

in less than an hour and without a helper crane, theRTC-80100 Series II is ready for transport.

• Unlike other big RT's, the tires do not need to beremoved for transport.

• Only the counterweights and outrigger boxes needto be removed to get the crane's vehicle width under10' (3.05 m).

• Because it is under 10' (3.05 m) wide and features alow overall height, the RTC-80100 Series II transportseasier than the competition.

Link-Belt ConstructionEquipment Company isa leader in the design,manufacture and sales oftelescopic and lattice boomcranes, with headquarters inLexington, Kentucky.

In the recent decade, a dynamic and highlyfocused Link-Belt has emerged as a marketleader in crane design and product qualitystandards by focusing on continuousimprovement and employee empowerment.

Link-Belt operates on the principles ofcontinuous quality improvement, ISO 9001,and established values that support thevision of quality. These principles result inreduction in waste, better use of companyresources and improved employee andcustomer satisfaction.

With major capital improvements overthe last ten years, along with continuous

Lexington, Kentucky

www.linkbelt.com

® Link-Belt is a registered trademark. Copyright 2009.All rights reserved. We are constantly improving ourproducts and therefore reserve the right to changedesigns and specifications.

Litho in U.S.A. 10/10 #4381 (supersedes #4356)