royco aerospace & defense fluids reference guide 2012
DESCRIPTION
ROYCO Aerospace & Defense Fluids Reference Guide 2012TRANSCRIPT
1
For Questions or Comments, please call +1 (203) 573-4595
At the dawn of the jet age Anderol Specialty Lubricants’
ROYCO® brand established itself as the preeminent lubricant
for aviation. Ever since,
ROYCO® fluids have been
a trusted and a leading
technology for the most
critical of applications.
From the bitter cold of the
poles to the simmering
heat of the world’s deserts, these engineered fluids deliver
unrivaled performance for the most advanced defense and
commercial aerospace requirements. It is certain that the
ROYCO® brand is what you can rely on for your aerospace
and defense fluids needs.
Advanced Technology for:
• Fire-Resistant Hydraulic Fluids • Mineral Oil based Hydraulic Fluids • Performance Compounds and Greases • Specialty Application & Performance Fluids • Turbine & Drivetrain Fluids • Weapons Cleaner/Preservative Lubes
ROYCO® Aerospace and Defense Fluids set a quality and technology standard for the confidence that you can depend on today and have trusted for the past seventy years.
AS 9100 / ISO 9001:2000 Certified
1
For Questions or Comments, please call +1 (203) 573-4595
Table of Contents
Cross Reference Tablesi. Product to MIL-SPEC Cross-Reference ............................................ 2 ii. MIL-SPEC to Product Cross-Reference ............................................ 3
iii. NATO code to Product Cross-Reference ........................................ 4
iv. National Stock Number to Product Cross-Reference ................... 5 - 6
Fluid Category Summaries .................................................................. 7 - 9
Hydraulic Fluids ............................................................................. 10 - 17
Weapons Cleaner & Preservative Lubes ............................................. 18 - 19
Turbine & Drivetrain Fluids ............................................................... 20 - 25
Performance Compounds & Greases ................................................ 26 - 35
Specialty Application & Performance Fluids ....................................... 36 - 48
Appendixi. Shelf Life Descriptions ............................................................... 49 ii. Fluid-Elastomer Compatibility Tables .................................... 50 - 52
iii. Tariff code table ....................................................................... 53
Aerospace and Defense Fluids are proudly brought to you by:
2
For Questions or Comments, please call +1 (203) 573-4595
3
For Questions or Comments, please call +1 (203) 573-4595
Product to MIL-SPEC Cross-Reference
Fluid Specification NATO Code Page
ROYCO® LGF BMS-3-32-TYPE 2 N/A 11
ROYCO® SSF BMS-3-32-TYPE 1 N/A 10
ROYCO® 1MS MIL-PRF-83483 S-722 26
ROYCO® 11MS MIL-G-7711A O-155 27
ROYCO® 22CF MIL-PRF-81322 G-395 28
ROYCO® 22MS MIL-G-81827 S-578 29
ROYCO® 27 MIL-PRF-23827-TYPE 1 G-354 30
ROYCO® 43 SAE-AMS-4343 G-392 31
ROYCO® 44 SAE-AMS-2518 S-720 32
ROYCO® 46 MIL-L-46000 O-158 18, 33
ROYCO® 49 MIL-DTL-23549 G-392 34
ROYCO® 64 MIL-G-21164 G-353 35
ROYCO® 308CA MIL-PRF-32033 O-190 (obsolete) 36
ROYCO® 315 MIL-PRF-3150 O-192 37
ROYCO® 363 MIL-PRF-7870 O-142 38
ROYCO® 481 MIL-PRF-6081- GRADE 1010 O-133 20
ROYCO® 482 MIL-C-6529-TYPE 2 C-609 39
ROYCO® 483 MIL-C-6529-TYPE 3 C-610 40
ROYCO® 500 MIL-PRF-23699-STD O-156 21
ROYCO® 555 DOD-PRF-85734 O-160 22
ROYCO® 560 MIL-PRF-23699-HTS O-156 23
ROYCO® 581 MIL-C-6529-TYPE 1 C-608 41
ROYCO® 586L MIL-PRF-6086-GRADE L O-153 42
ROYCO® 586M MIL-PRF-6086-GRADE M O-155 43
ROYCO® 602 MIL-PRF-87252 S-1748 44
ROYCO® 634E MIL-PRF-63460-E S-758 19, 45
ROYCO® 717 MIL-DTL-17111 H-575 12
ROYCO® 756 MIL-PRF-5606 H-515 13
ROYCO® 770 MIL-PRF-46170 H-544 16
ROYCO® 782 MIL-PRF-83282 H-537 17
ROYCO® 783 MIL-PRF-6083 C-635 15
ROYCO® 808 MIL-PRF-7808-GRADE 3 OX-9 24
ROYCO® 885 MIL-PRF-6085 O-147 46
ROYCO® 899 MIL-PRF-23699-CI O-156 25
ROYCO® 950 MIL-PRF-7024-TYPE 2 O-158 48
2
For Questions or Comments, please call +1 (203) 573-4595
3
For Questions or Comments, please call +1 (203) 573-4595
MIL-SPEC to Product Cross-Reference
Specification Fluid NATO Code Page
BMS-3-32-TYPE 1 ROYCO® SSF N/A 10
BMS-3-32-TYPE 2 ROYCO® LGF N/A 11
DOD-PRF-85734 ROYCO® 555 O-160 22
MIL-C-6529-TYPE 1 ROYCO® 581 C-608 41
MIL-C-6529-TYPE 2 ROYCO® 482 C-609 39
MIL-C-6529-TYPE 3 ROYCO® 483 C-610 40
MIL-DTL-17111 ROYCO® 717 H-575 12
MIL-DTL-23549 ROYCO® 49 G-392 34
MIL-G-21164 ROYCO® 64 G-353 35
MIL-G-7711A ROYCO® 11MS O-155 27
MIL-G-81827 ROYCO® 22MS S-578 29
MIL-L-46000 ROYCO® 46 O-158 18, 33
MIL-PRF-23699-CI ROYCO® 899 O-156 25
MIL-PRF-23699-HTS ROYCO® 560 O-156 23
MIL-PRF-23699-STD ROYCO® 500 O-156 21
MIL-PRF-23827-TYPE 1 ROYCO® 27 G-354 30
MIL-PRF-3150 ROYCO® 315 O-192 37
MIL-PRF-32033 ROYCO® 308CA O-190 (obsolete) 36
MIL-PRF-46170 ROYCO® 770 H-544 16
MIL-PRF-5606 ROYCO® 756 H-515 13
MIL-PRF-6081- GRADE 1010 ROYCO® 481 O-133 20
MIL-PRF-6083 ROYCO® 783 C-635 15
MIL-PRF-6085 ROYCO® 885 O-147 46
MIL-PRF-6086-GRADE L ROYCO® 586L O-153 42
MIL-PRF-6086-GRADE M ROYCO® 586M O-155 43
MIL-PRF-63460-E ROYCO® 634E S-758 19, 45
MIL-PRF-7024-TYPE 2 ROYCO® 950 O-158 48
MIL-PRF-7808-GRADE 3 ROYCO® 808 OX-9 24
MIL-PRF-7870 ROYCO® 363 O-142 38
MIL-PRF-81322 ROYCO® 22CF G-395 28
MIL-PRF-83282 ROYCO® 782 H-537 17
MIL-PRF-83483 ROYCO® 1MS S-722 26
MIL-PRF-87252 ROYCO® 602 S-1748 44
SAE-AMS-2518 ROYCO® 44 S-720 32
SAE-AMS-4343 ROYCO® 43 G-392 31
4
For Questions or Comments, please call +1 (203) 573-4595
5
For Questions or Comments, please call +1 (203) 573-4595
NATO code to Product Cross-Reference
NATO Code Specification Fluid Page
C-608 MIL-C-6529-TYPE 1 ROYCO® 581 41
C-609 MIL-C-6529-TYPE 2 ROYCO® 482 39
C-610 MIL-C-6529-TYPE 3 ROYCO® 483 40
C-635 MIL-PRF-6083 ROYCO® 783 15
G-353 MIL-G-21164 ROYCO® 64 35
G-354 MIL-PRF-23827-TYPE 1 ROYCO® 27 30
G-392 MIL-DTL-23549 ROYCO® 49 34
G-392 SAE-AMS-4343 ROYCO® 43 31
G-395 MIL-PRF-81322 ROYCO® 22CF 28
H-515 MIL-PRF-5606 ROYCO® 756 13
H-537 MIL-PRF-83282 ROYCO® 782 17
H-544 MIL-PRF-46170 ROYCO® 770 16
H-575 MIL-DTL-17111 ROYCO® 717 12
O-133 MIL-PRF-6081- GRADE 1010 ROYCO® 481 20
O-142 MIL-PRF-7870 ROYCO® 363 38
O-147 MIL-PRF-6085 ROYCO® 885 46
O-153 MIL-PRF-6086-GRADE L ROYCO® 586L 42
O-155 MIL-G-7711A ROYCO® 11MS 27
O-155 MIL-PRF-6086-GRADE M ROYCO® 586M 43
O-156 MIL-PRF-23699-CI ROYCO® 899 25
O-156 MIL-PRF-23699-HTS ROYCO® 560 23
O-156 MIL-PRF-23699-STD ROYCO® 500 21
O-158 MIL-L-46000 ROYCO® 46 18, 33
O-158 MIL-PRF-7024-TYPE 2 ROYCO® 950 48
O-160 DOD-PRF-85734 ROYCO® 555 22
O-190 (obsolete) MIL-PRF-32033 ROYCO® 308CA 36
O-192 MIL-PRF-3150 ROYCO® 315 37
OX-9 MIL-PRF-7808-GRADE 3 ROYCO® 808 24
S-578 MIL-G-81827 ROYCO® 22MS 29
S-720 SAE-AMS-2518 ROYCO® 44 32
S-722 MIL-PRF-83483 ROYCO® 1MS 26
S-758 MIL-PRF-63460-E ROYCO® 634E 19, 45
S-1748 MIL-PRF-87252 ROYCO® 602 44
N/A BMS-3-32-TYPE 1 ROYCO® SSF 10
N/A BMS-3-32-TYPE 2 ROYCO® LGF 11
4
For Questions or Comments, please call +1 (203) 573-4595
5
For Questions or Comments, please call +1 (203) 573-4595
National Stock Number Product Specification Page
9150-00-082-7524 ROYCO® 756 MIL-PRF-5606 13
9150-00-108-5359 ROYCO® 808 MIL-PRF-7808-GRADE 3 24
9150-00-111-6254 ROYCO® 770 MIL-PRF-46170 16
9150-00-111-6255 ROYCO® 770 MIL-PRF-46170 16
9150-00-111-6256 ROYCO® 770 MIL-PRF-46170 16
9150-00-119-9291 ROYCO® 43 SAE-AMS-4343 31
9150-00-145-0268 ROYCO® 22CF MIL - PRF - 81322 28
9150-00-149-7431 ROYCO® 782 MIL-PRF-83282 17
9150-00-149-7432 ROYCO® 782 MIL-PRF-83282 17
9150-00-180-6266 ROYCO® 899 MIL-PRF-23699-CI 25
9150-00-180-6290 ROYCO® 782 MIL-PRF-83282 17
9150-00-180-6381 ROYCO® 11MS MIL - G - 7711A 27
9150-00-180-6382 ROYCO® 11MS MIL - G - 7711A 27
9150-00-180-6383 ROYCO® 11MS MIL - G - 7711A 27
9150-00-181-7724 ROYCO® 22CF MIL - PRF - 81322 28
9150-00-223-4004 ROYCO® 64 MIL-G-21164 35
9150-00-223-4116 ROYCO® 586L MIL-PRF-6086-GRADE L 42
9150-00-223-4129 ROYCO® 885 MIL-PRF-6085 46
9150-00-223-4130 ROYCO® 586M MIL-PRF-6086-GRADE M 43
9150-00-223-4134 ROYCO® 756 MIL-PRF-5606 13
9150-00-231-2356 ROYCO® 315 MIL-PRF-3150 37
9150-00-231-2357 ROYCO® 315 MIL-PRF-3150 37
9150-00-231-2361 ROYCO® 315 MIL-PRF-3150 37
9150-00-231-6676 ROYCO® 481 MIL-PRF-6081- GRADE 1010 20
9150-00-231-6689 ROYCO® 308CA MIL-PRF-32033 36
9150-00-231-9045 ROYCO® 308CA MIL-PRF-32033 36
9150-00-231-9062 ROYCO® 308CA MIL-PRF-32033 36
National Stock Number Product Specification Page
9150-00-235-5555 ROYCO® 49 MIL-DTL-23549 34
9150-00-240-2235 ROYCO® 586M MIL-PRF-6086-GRADE M 43
9150-00-252-6383 ROYCO® 756 MIL-PRF-5606 13
9150-00-257-5449 ROYCO® 885 MIL-PRF-6085 46
9150-00-263-3490 ROYCO® 363 MIL-PRF-7870 38
9150-00-265-9408 ROYCO® 756 MIL-PRF-5606 13
9150-00-265-9417 ROYCO® 586L MIL-PRF-6086-GRADE L 42
9150-00-269-8255 ROYCO® 43 SAE-AMS-4343 31
9150-00-270-4057 ROYCO® 808 MIL-PRF-7808-GRADE 3 24
9150-00-273-2388 ROYCO® 481 MIL-PRF-6081- GRADE 1010 20
9150-00-273-2397 ROYCO® 363 MIL-PRF-7870 38
9150-00-273-8807 ROYCO® 481 MIL-PRF-6081- GRADE 1010 20
9150-00-281-2060 ROYCO® 308CA MIL-PRF-32033 36
9150-00-281-9438 ROYCO® 363 MIL-PRF-7870 38
9150-00-408-9635 ROYCO® 22CF MIL-PRF-81322 28
9150-00-542-1430 ROYCO® 363 MIL-PRF-7870 38
9150-00-664-6518 ROYCO® 885 MIL-PRF-6085 46
9150-00-681-5999 ROYCO® 899 MIL-PRF-23699-CI 25
9150-00-687-4241 ROYCO® 46 MIL-L-46000 18, 33
9150-00-753-4686 ROYCO® 46 MIL-L-46000 18, 33
9150-00-754-2595 ROYCO® 64 MIL-G-21164 35
9150-00-782-2627 ROYCO® 808 MIL-PRF-7808-GRADE 3 24
9150-00-782-2679 ROYCO® 808 MIL-PRF-7808-GRADE 3 24
9150-00-823-8047 ROYCO® 49 MIL-DTL-23549 34
9150-00-889-3522 ROYCO® 46 MIL-L-46000 18, 33
9150-00-935-4017 ROYCO® 22MS MIL-G-81827 29
9150-00-935-4017 ROYCO® 27 MIL-PRF-23827-TYPE 1 30
National Stock Number to Product Cross-Reference
6
For Questions or Comments, please call +1 (203) 573-4595
7
For Questions or Comments, please call +1 (203) 573-4595
National Stock Number Product Specification Page
9150-00-935-4018 ROYCO® 64 MIL-G-21164 35
9150-00-935-5851 ROYCO® 22CF MIL - PRF - 81322 28
9150-00-935-6597 ROYCO® 46 MIL-L-46000 18, 33
9150-00-935-9807 ROYCO® 783 MIL-PRF-6083 15
9150-00-935-9808 ROYCO® 783 MIL-PRF-6083 15
9150-00-935-9809 ROYCO® 783 MIL-PRF-6083 15
9150-00-935-9810 ROYCO® 783 MIL-PRF-6083 15
9150-00-944-8953 ROYCO® 22CF MIL - PRF - 81322 28
9150-00-965-2003 ROYCO® 64 MIL-G-21164 35
9150-00-985-7099 ROYCO® 899 MIL-PRF-23699-CI 25
9150-00-985-7244 ROYCO® 22MS MIL-G-81827 29
9150-00-985-7244 ROYCO® 27 MIL-PRF-23827-TYPE 1 30
9150-00-985-7245 ROYCO® 22MS MIL-G-81827 29
9150-00-985-7245 ROYCO® 27 MIL-PRF-23827-TYPE 1 30
9150-00-985-7246 ROYCO® 22MS MIL-G-81827 29
9150-00-985-7246 ROYCO® 27 MIL-PRF-23827-TYPE 1 30
9150-00-985-7247 ROYCO® 22MS MIL-G-81827 29
9150-00-985-7247 ROYCO® 27 MIL-PRF-23827-TYPE 1 30
9150-00-985-7248 ROYCO® 22MS MIL-G-81827 29
9150-00-985-7248 ROYCO® 27 MIL-PRF-23827-TYPE 1 30
9150-00-985-7316 ROYCO® 49 MIL-DTL-23549 34
9150-01-009-7709 ROYCO® 782 MIL-PRF-83282 17
9150-01-018-8959 ROYCO® 885 MIL-PRF-6085 46
9150-01-053-6688 ROYCO® 634E MIL-PRF-63460-E 19, 45
9150-01-054-6453 ROYCO® 634E MIL-PRF-63460-E 19, 45
9150-01-079-6124 ROYCO® 634E MIL-PRF-63460-E 19, 45
9150-01-102-1473 ROYCO® 634E MIL-PRF-63460-E 19, 45
National Stock Number Product Specification Page
9150-01-158-0462 ROYCO® 770 MIL-PRF-46170 16
9150-01-209-2684 ROYCO® 555 DOD-PRF-85734 22
9150-01-209-3399 ROYCO® 555 DOD-PRF-85734 22
9150-01-210-1938 ROYCO® 555 DOD-PRF-85734 22
9150-01-219-1629 ROYCO® 64 MIL-G-21164 35
9150-01-237-7468 ROYCO® 22CF MIL - PRF - 81322 28
9150-01-262-3358 ROYCO® 22CF MIL - PRF - 81322 28
9150-01-304-0885 ROYCO® 602 MIL-PRF-87252 44
9150-01-306-2470 ROYCO® 602 MIL-PRF-87252 44
9150-01-306-2475 ROYCO® 602 MIL-PRF-87252 44
9150-01-311-5640 ROYCO® 885 MIL-PRF-6085 46
9150-01-327-9631 ROYCO® 634E MIL-PRF-63460-E 19, 45
9150-01-332-7819 ROYCO® 770 MIL-PRF-46170 16
9150-01-336-7174 ROYCO® 602 MIL-PRF-87252 44
9150-01-345-6449 ROYCO® 22CF MIL-PRF-81322 28
9150-01-378-0559 ROYCO® 22CF MIL - PRF - 81322 28
9150-01-378-0693 ROYCO® 22CF MIL - PRF - 81322 28
9150-01-378-0744 ROYCO® 22CF MIL - PRF - 81322 28
9150-01-439-0756 ROYCO® 560 MIL-PRF-23699-HTS 23
9150-01-439-0764 ROYCO® 560 MIL-PRF-23699-HTS 23
9150-01-439-2070 ROYCO® 560 MIL-PRF-23699-HTS 23
9150-01-466-7280 ROYCO® 1MS MIL-PRF-83483 26
9150-01-476-1063 ROYCO® 500 MIL-PRF-23699-STD 21
9150-01-476-1074 ROYCO® 500 MIL-PRF-23699-STD 21
9150-01-476-1075 ROYCO® 500 MIL-PRF-23699-STD 21
9150-01-501-5729 ROYCO® 22CF MIL - PRF - 81322 28
9150-01-519-1200 ROYCO® 22CF MIL - PRF - 81322 28
National Stock Number to Product Cross-Reference
6
For Questions or Comments, please call +1 (203) 573-4595
7
For Questions or Comments, please call +1 (203) 573-4595
Product Specifications* ISO GradeNATO
DesignationDescription
ROYCO® SSF BMS - 3 - 32 - TYPE 1 — — Shock Strut Fluid
ROYCO® LGF BMS - 3 - 32 - TYPE 2 — — Landing Gear Fluid
ROYCO® 717 — 32 H-575 Power Transmission Hydraulic Fluid
ROYCO® 756 MIL - PRF - 5606 14 H-515 “Red Oil” - Hydraulic Fluid
ROYCO® 756A — 14 —Hydraulic fluid that meets obsolete MIL-PRF-5606(A)
ROYCO® 757 — 4 — Hydraulic and Preservative Fluid
ROYCO® 783 MIL - PRF - 6083 14 C-635Land Systems Hydraulic and Preservative Fluid
ROYCO® 770 MIL - PRF - 46170 16 H-544Fire-Resistant, Synthetic, Severe-Duty Hydraulic Fluid
ROYCO® 782 MIL - PRF - 83282 14 H-537 Fire-Resistant, Synthetic Hydraulic Fluid
Hydraulic Fluids
ROYCO® Hydraulic Fluids are engineered for the most rigorous of applications – the battlefield. With such credentials you can be sure that ROYCO® Hydraulic Fluids will perform for your aerospace and industrial hydraulic needs. These fluids are additized to provide optimal anti-wear, corrosion, demulsibility, and oxidation performance across broad operating temperature ranges. For added reliability many of the ROYCO® Hydraulic Fluids are produced to meet or exceed the military’s cleanliness requirements for hydraulic fluids.
Weapons Cleaner & Preservative Lubes
The modern firearm has come a long way. The world’s militaries demand that their firearms work every time and all the time. The ROYCO® Weapons Cleaner & Preservative Lubes are not simple “gun oils.” These fluids are complex formulations of contemporary technology that removes fouling, prevents corrosion, and provides long-lasting lubrication for weapon readiness. These characteristics are proven for use in both small and large caliber weapons - even after severe firing and in the harshest of environments. A truly military grade product that will exceed any sporting demands.
Product Specifications* NATO Designation Description
ROYCO® 46 MIL - L - 46000 O-158 Semi-Fluid Synthetic Lubricant with Lithium
ROYCO® 634E MIL - PRF - 63460 - E S-758 Advanced Weapons Cleaner, Lube & Preservative
Fluid Category Summaries
8
For Questions or Comments, please call +1 (203) 573-4595
9
For Questions or Comments, please call +1 (203) 573-4595
Product Specifications* NATO Designation Description
ROYCO® 481 MIL - PRF - 6081 GRADE 1010 O-133 Mineral Oil Turbine Engine Oil
ROYCO® 500 MIL - PRF - 23699 STD O-156 Synthetic Turbine Engine Oil
ROYCO® 555 DOD - PRF - 85734 O-160 Turbine Engine & Helicopter Transmission Oil
ROYCO® 560 MIL - PRF - 23699 HTS O-156 High Temperature Stability Turbine Engine Oil
ROYCO® 808 MIL - PRF - 7808 GRADE 3 O-148 Low viscosity Turbine Engine Oil
ROYCO® 899 MIL - PRF - 23699 CI O-156 Corrosion Inhibition Turbine Engine Oil
Product Specifications* NATO Designation Description
ROYCO® 1MS MIL - PRF - 83483 —Anti-Seize Thread and Severe-Duty/Heavy-Load Compound
ROYCO® 11MS — —Severe-Duty General Purpose Aircraft Grease that meets obsolete MIL - G - 7711A
ROYCO® 22CF MIL - PRF - 81322 G-395A Chromate-Free, Wide Operating Temperature, Multi-Function & General Purpose Grease
ROYCO® 22MS MIL - G - 81827 —Wide-Operating Temperature, High-Load Synthetic Grease
ROYCO® 27 MIL - PRF - 23827 TYPE 1 G-354 Multi-purpose Instrument & Airframe Grease
ROYCO® 43 SAE - AMS - 4343 G-392 Lithium Grease
ROYCO® 44 SAE - AMS - 2518 S-720 Graphite Anti-Seize Compound
ROYCO® 46 MIL - L - 46000 O-158 Semi-Fluid Synthetic Lubricant with Lithium
ROYCO® 49 MIL - DTL - 23549 — Extreme Pressure Grease with MoS2
ROYCO® 64 MIL - G - 21164 G-353 Advanced MoS2 Synthetic Grease
Turbine & Drivetrain Fluids
Today’s aerospace turbine engines serve a life critical role. With such responsibility, ROYCO® Turbine Fluids are developed to deliver performance to a sophisticated industry. At the crossroads of this obligation are decades of technical wherewithal and dedicated manufacturing. You can have confidence in ROYCO® Turbine Fluids, for the most advanced fighters to commercial jets and through to helicopter drivetrains.
Performance Compounds and Greases
ROYCO® Performance Compounds and Greases are semi-solid blends of the latest technology for additives, base fluids and modern thickeners. The delicate balance of these components and the artful science that goes into these mixtures should only be trusted to experienced practitioners of ROYCO® Performance Compounds and Greases. These systems are designed for the most demanding lubrication requirements. From severely loaded gears and extreme pressure sliding surfaces, while exposed to high altitude, corrosive and/or marine environments, ROYCO® Performance Compounds and Greases deliver the needed performance.
8
For Questions or Comments, please call +1 (203) 573-4595
9
For Questions or Comments, please call +1 (203) 573-4595
Product Specifications*NATO
DesignationDescription
ROYCO® 308CA MIL - PRF - 32033 O-190 (obsolete)A General Purpose, Lubricating, and Preservative/Water-Displacing Oil
ROYCO® 315 MIL - PRF - 3150 O-192 General Purpose Preservative Lube
ROYCO® 363 MIL - PRF - 7870 0-142Low Temperature, General Purpose & Instrument Lube
ROYCO® 482 MIL - C - 6529 TYPE 2 C-609 Aircraft Piston Engine & Parts Preservative Fluid
ROYCO® 483 MIL - C - 6529 TYPE 3 C-610 Aircraft Turbojet Engine & Parts Preservative Fluid
ROYCO® 581 MIL - C - 6529 TYPE 1 C-608 Preservative CONCENTRATE for Aircraft Engines
ROYCO® 586L MIL - PRF - 6086 GRADE L O-153 Low Temperature Load Carrying Lube
ROYCO® 586M MIL - PRF - 6086 GRADE M O-155 High Temperature Load Carrying Lube
ROYCO® 602 MIL - PRF - 87252 S-1748Hydrolytically Stable Coolant & Dielectric Lubricating Fluid
ROYCO® 634E MIL - PRF - 63460 - E S-758 Advanced Multi-purpose Lubricant
ROYCO® 885 MIL - PRF - 6085 O-147 Low-Volatility Instrument & General Lubricating Fluid
ROYCO® HF-825 — — Assembly Grease
ROYCO® 950 MIL - PRF - 7024 TYPE 2 — Fuel System Calibration Fluid
Specialty Application and Performance Fluids
Today’s aerospace environment is broad and has many needs. The ROYCO® Specialty Application Fluids line brings the most advanced technology and confidence to those needs. From coolant to dielectric protection through to gear and sliding surface lube requirements, ROYCO® Specialty Application Fluids are the solution.
HYDRAULIC FLUIDS
10
For Questions or Comments, please call +1 (203) 573-4595
11
For Questions or Comments, please call +1 (203) 573-4595
Royco® SSF
Product Description: Shock Strut Fluid - a mineral based landing gear system and preservative fluid formulated with corrosion inhibition in mind. This fluid is offered in both red and Boeing specified yellow (straw) colors.
Specification: BMS - 3 - 32 - TYPE 1
NATO Specification: N/A
Joint Service Designation: N/A MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 4 Years
Tariff Code: 2710.19.3080
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
10
For Questions or Comments, please call +1 (203) 573-4595
HYDRAULIC FLUIDS
11
For Questions or Comments, please call +1 (203) 573-4595
Royco® LGF
Product Description: Landing gear Fluid - a mineral based landing gear system fluid formulated for excellent low-temperature operability. This fluid is offered in both red and Boeing specified yellow (straw) colors.
Specification: BMS - 3 - 32 - TYPE 2
NATO Specification: N/A
Joint Service Designation: N/A MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 4 Years
Tariff Code: 2710.19.3080
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
HYDRAULIC FLUIDS
12
For Questions or Comments, please call +1 (203) 573-4595
13
For Questions or Comments, please call +1 (203) 573-4595
Royco® 717
Product Description: An additized power transmission hydraulic fluid designed to afford superior corrosion, demulsibility, oxidation and wear performance. Originally designed to meet the US Navy’s strict maritime requirements for ordinance systems - the obsolete MIL-DTL-17111.
Specification: Obsolete (MIL - DTL - 17111)
NATO Specification: H-575
Joint Service Designation: N/A
MIL-SPEC Scope: N/A
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 5 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
National Stock Number Grade Amount Container
9150-00-290-4091 — 8 oz. Can
9150-00-261-8317 — 5 gal. Can
9150-00-261-8318 — 55 gal. Drum
12
For Questions or Comments, please call +1 (203) 573-4595
HYDRAULIC FLUIDS
13
For Questions or Comments, please call +1 (203) 573-4595
Royco® 756
Product Description: “RED OIL” - A super clean, highly refined mineral oil based, hydraulic fluid for operation over wide temperature ranges.
Specification: MIL - PRF - 5606
NATO Specification: H-515
Joint Service Designation: OM-15 MIL-SPEC Scope: This specification describes the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54 °C to +135 °C temperature range. This fluid is identified by military symbol OHA and NATO Code No. H-515. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 5 YearsNATO 2 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-252-6383 — 1 quart Can
9150-00-223-4134 — 1 gal. Can
9150-00-082-7524 — 10 gal. Can
9150-00-265-9408 — 55 gal. Drum
HYDRAULIC FLUIDS
14
For Questions or Comments, please call +1 (203) 573-4595
15
For Questions or Comments, please call +1 (203) 573-4595
Royco® 757
Product Description: A super-clean, additized, highly refined mineral oil ordinance system hydraulic and preservative fluid that has been designed to be used in across a wide operating temperature threshold. A proprietary development for the advanced features of unmanned aerial vehicles and more.
Specification: N/A
NATO Specification: N/A
Joint Service Designation: OM-18 MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
14
For Questions or Comments, please call +1 (203) 573-4595
HYDRAULIC FLUIDS
15
For Questions or Comments, please call +1 (203) 573-4595
Royco® 783
Product Description: A super clean, mineral based, hydraulic fluid designed with oxidation, corrosion, and anti-wear performance in mind. This is also an excellent preservative fluid.
Specification: MIL - PRF - 6083
NATO Specification: C-635
Joint Service Designation: PX-26 MIL-SPEC Scope: This specification covers one grade of petroleum base hydraulic fluid that is rust inhibited and used both as a preservative for hydraulic systems and components as well as being an operational fluid. The hydraulic fluid is identified by Military Symbol OHT and NATO Symbol C-635. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-935-9807 — 1 quart Can
9150-00-935-9808 — 1 gal. Can
9150-00-935-9809 — 5 gal. Can
9150-00-935-9810 — 55 gal. Drum
HYDRAULIC FLUIDS
16
For Questions or Comments, please call +1 (203) 573-4595
17
For Questions or Comments, please call +1 (203) 573-4595
Royco® 770
Product Description: A super clean, synthetic based, severe-duty, hydraulic fluid demonstrating fire-resistivity and is specifically additized for excellence in corrosion, oxidation and rust inhibition performance.
Specification: MIL - PRF - 46170
NATO Specification: H-544
Joint Service Designation: N/A MIL-SPEC Scope: This specification covers the requirements for one type of synthetic hydrocarbon base hydraulic fluid. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 5 YearsNATO 3 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Hydraulics Good Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-01-332-7819 Type I 1 pt. Can
9150-00-111-6256 Type I 1 quart Can
9150-00-111-6254 Type I 1 gal. Can
9150-00-111-6255 Type I 5 gal. Can
9150-01-158-0462 Type I 55 gal. Drum
16
For Questions or Comments, please call +1 (203) 573-4595
HYDRAULIC FLUIDS
17
For Questions or Comments, please call +1 (203) 573-4595
Royco® 782
Product Description: A super clean, synthetic based hydraulic fluid with suitability for the most extreme operating temperatures. Designed for improved fire-resistivity.
Specification: MIL - PRF - 83282
NATO Specification: H-537
Joint Service Designation: OX-19 MIL-SPEC Scope: This specification covers the requirements for a synthetic hydrocarbon-base hydraulic fluid for use in the temperature range of -40 °C to +205 °C. This hydraulic fluid is identified by NATO Code Number H-537. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 5 YearsNATO 2 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Hydraulics Good Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-149-7431 — 1 quart Can
9150-00-149-7432 — 1 gal. Can
9150-01-009-7709 — 10 gal. Can
9150-00-180-6290 — 55 gal. Drum
WEAPONS CLEANER & PRESERVATIVE LUBES
18
For Questions or Comments, please call +1 (203) 573-4595
19
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A synthetic based, lithium stearate thickened semi fluid grease for automatic weapons. Modern additive technology provides corrosion, oxidation, rust inhibition and anti-wear performance.
Specification: MIL - L - 46000
NATO Specification: O-158
Joint Service Designation: N/A MIL-SPEC Scope: This specification covers a semi-fluid lubricant for automatic weapons operating within a temperature range of -54 to +127 °C (-65 to +260 °F). The lubricant is identified by Military Symbol LSA and NATO Code Number O-158. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 2 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Synthetic
Ester Based Grease
Poorto
Good
Fair to
Good
Poor to
Fair
Very Good
Poor to
FairPoor Good Poor Poor
Poor to
Fair
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-00-935-6597 — 2 fl oz. Bottle
9150-00-889-3522 — 4 fl oz. Bottle
9150-00-687-4241 — 1 quart Can
9150-00-753-4686 — 1 gal. Can
Royco® 46
18
For Questions or Comments, please call +1 (203) 573-4595
WEAPONS CLEANER & PRESERVATIVE LUBES
19
For Questions or Comments, please call +1 (203) 573-4595
Royco® 634E
Product Description: An advanced military weapons system lubricant that is engineered for cleaning, lubrication, and preservation of both small and large caliber arms through a wide range of environmental conditions. Technically sophisticated to serve the military and useful in many other demanding lubrication requirements.
Specification: MIL - PRF - 63460 - E
NATO Specification: S-758
Joint Service Designation: N/A
MIL-SPEC Scope: This specification describes the performance requirements and verification methods for a type of LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS. This product is for use in cleaning, lubricating and short-term preservation of small and large caliber military weapons, operating in the temperature range of -51 to +71 °C (-60 to +160 °F).
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 3 Years
Tariff Code: 3403.99.0000
National Stock Number Grade Amount Container
9150-01-102-1473 — 0.5 fl oz. Bottle
9150-01-079-6124 — 4 fl oz. Bottle
9150-01-054-6453 — 1 pt. Sprayer
9150-01-327-9631 — 1 liter Sprayer
9150-01-053-6688 — 1 gal. Bottle
TURBINE & DRIVETRAIN FLUIDS
20
For Questions or Comments, please call +1 (203) 573-4595
21
For Questions or Comments, please call +1 (203) 573-4595
Royco® 481
Product Description: A mineral oil based fluid blended for improved low-temperature and oxidation performance. An excellent choice for fuel system and parts storage and is often used for “air show smoke.”
Specification: MIL - PRF - 6081 GRADE 1010
NATO Specification: O-133
Joint Service Designation: MK-8 (OM-10 - obsolete) MIL-SPEC Scope: This specification covers the requirements for two grades of jet engine lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 3 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Turbine Oils Good Good
Not Accept-able to Poor
Very Good
GoodPoor to
FairGood
Poor to
Good
Fair to
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-273-2388 Grade 1010 1 quart Can
9150-00-273-8807 Grade 1010 1 gal. Can
9150-00-231-6676 Grade 1010 55 gal. Drum
20
For Questions or Comments, please call +1 (203) 573-4595
TURBINE & DRIVETRAIN FLUIDS
21
For Questions or Comments, please call +1 (203) 573-4595
Royco® 500
Product Description: A synthetic ester-based, broad application, 5 cSt turbine engine oil that is blended for strong oxidative and thermal stability performance.
Specification: MIL - PRF - 23699 STD
NATO Specification: O-156
Joint Service Designation: OX-27
MIL-SPEC Scope: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 °C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156.
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Turbine Oils
Poorto
Good
Poorto
Good
Poorto
Fair
Very Good
Poorto
FairPoor Good Poor Poor Good
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-01-476-1075 Class STD 8 fl oz. Can
9150-01-476-1074 Class STD 1 quart Can
9150-01-476-1063 Class STD 55 gal. Drum
TURBINE & DRIVETRAIN FLUIDS
22
For Questions or Comments, please call +1 (203) 573-4595
23
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A synthetic-based, 5 cSt turbine engine oil that is formulated for excellent load carrying capacity - making it the premier fluid for use in many helicopter turbines, transmissions and gearboxes.
Specification: DOD - PRF - 85734
NATO Specification: O-160
Joint Service Designation: OX-26 MIL-SPEC Scope: This specification covers the requirements for one grade of a synthetic base helicopter transmission system lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Turbine Oils
Poorto
Good
Poorto
Good
Poorto
Fair
Very Good
Poorto
FairPoor Good Poor Poor Good
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-01-209-2684 — 1 quart Can
9150-01-210-1938 — 1 gal. Can
9150-01-209-3399 — 55 gal. Drum
Royco® 555
22
For Questions or Comments, please call +1 (203) 573-4595
TURBINE & DRIVETRAIN FLUIDS
23
For Questions or Comments, please call +1 (203) 573-4595
Royco® 560
Product Description: An advanced, high performance, 5 cSt synthetic based turbine engine oil that is engineered for engine cleanliness while providing for excellent thermal and oxidative stability performance.
Specification: MIL - PRF - 23699 HTS
NATO Specification: O-156
Joint Service Designation: OX-27
MIL-SPEC Scope: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 °C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156.
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Turbine Oils
Poorto
Good
Poorto
Good
Poorto
Fair
Very Good
Poorto
FairPoor Good Poor Poor Good
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-01-439-0764 Class HTS 8 fl oz. Can
9150-01-439-0756 Class HTS 1 quart Can
9150-01-439-2070 Class HTS 55 gal. Drum
TURBINE & DRIVETRAIN FLUIDS
24
For Questions or Comments, please call +1 (203) 573-4595
25
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A synthetic ester-based low-viscosity oil that is designed for excellent performance in turbo-prop and turbo-jet engines.
Specification: MIL - PRF - 7808 GRADE 3
NATO Specification: OX-9
Joint Service Designation: AN-0-3 MIL-SPEC Scope: This specification covers the requirements for two grades of aircraft turbine engine lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Turbine Oils
Poorto
Good
Poorto
Good
Poorto
Fair
Very Good
Poorto
FairPoor Good Poor Poor Good
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-00-108-5359 Grade 3 8 oz. Can
9150-00-782-2627 Grade 3 1 quart Can
9150-00-270-4057 Grade 3 1 gal. Can
9150-00-782-2679 Grade 3 55 gal. Drum
Royco® 808
24
For Questions or Comments, please call +1 (203) 573-4595
TURBINE & DRIVETRAIN FLUIDS
25
For Questions or Comments, please call +1 (203) 573-4595
Royco® 899
Product Description: A synthetic ester-based, broad application, 5 cSt turbine engine oil that is blended with corrosion inhibition in mind and for strong oxidative and thermal stability performance.
Specification: MIL - PRF - 23699 CI
NATO Specification: O-156
Joint Service Designation: N/A MIL-SPEC Scope: This specification covers three classes of gas turbine engine lubricating oils, primarily used for aircraft engines, which have a nominal viscosity of 5 centistokes at 100 °C and which are typically made with neopentyl polyol ester base stocks. This oil is identified by NATO Code Number 0-156. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Turbine Oils
Poorto
Good
Poorto
Good
Poorto
Fair
Very Good
Poorto
FairPoor Good Poor Poor Good
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-00-180-6266 Class C/I 8 fl oz. Can
9150-00-985-7099 Class C/I 1 quart Can
9150-00-681-5999 Class C/I 55 gal. Drum
26
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
27
For Questions or Comments, please call +1 (203) 573-4595
Product Description: An engineered compound of advanced additives, inorganic gel thickeners, and MoS2 that provides superior performance for high load and sliding surface use under severe operating conditions, broad temperatures and/or corrosive environment.
Specification: MIL - PRF - 83483
NATO Specification: S-722
Joint Service Designation: N/A MIL-SPEC Scope: This specification presents requirements for one type of anti-seize thread compound composed of molybdenum disulfide and petrolatum. Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Mineral Grease
Good Good
Not Accept-able to Poor
Very Good
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
Royco® 1MS
26
For Questions or Comments, please call +1 (203) 573-4595
27
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
Royco® 11MS
Product Description: A high load bearing, sliding surface application oriented grease where severe operating conditions include broad temperature ranges and corrosive environments. Designed with exceptional water resistance and load carrying properties make it suitable for use in bogie pivot pins and other landing gear assemblies, actuators, and other airframe applications.
Specification: MIL - G - 7711A
NATO Specification: O-155
Joint Service Designation: AN-0-3 MIL-SPEC Scope: N/A
Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years
Tariff Code: 2710.19.4000
Compatibility: See table on page 51. (†See page 49.)
National Stock Number Grade Amount Container
9150-00-180-6381 — 1.75 lb. Can
9150-00-180-6382 — 6.5 lb. Can
9150-00-180-6383 — 35 lb. Can
28
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
29
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A synthetic based multi-purpose grease that has robust performance across operating conditions and needs. Designed to perform against severe loading and high speed applications across a broad operating temperature range.
Specification: MIL - PRF - 81322
NATO Specification: G-395
Joint Service Designation: XG-293 (equivalent) MIL-SPEC Scope: This specification covers one grade of general purpose, aircraft grease, NATO Code G-395, formulated to withstand operations at high speeds and a wide temperature range of -54 to 177 °C (-65 to 350 °F). Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 6 YearsNATO 3 Years
Tariff Code: 3403.99.0000
Compatibility: See table on page 51. (†See page 49.) National Stock Number Grade Amount Container
9150-00-145-0268 Grade 2 6.5 lb. Can
9150-00-181-7724 Grade 2 8 oz. Tube
9150-00-935-5851 Grade 2 35 lb. Can
9150-00-944-8953 Grade 2 1.75 lb. Can
9150-01-237-7468 Grade 1 120 lb. Drum
9150-01-262-3358 Grade 2 14 oz. Cartridge
9150-01-378-0559 Grade 1 1.75 lb. Can
9150-01-378-0693 Grade 1 6.5 lb. Can
9150-01-378-0744 Grade 1 8 oz. Tube
9150-01-501-5729 Grade 1 12 oz. Tube
9150-01-519-1200 Grade 1 12.5 oz. Cartridge
Royco® 22CF
28
For Questions or Comments, please call +1 (203) 573-4595
29
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
Royco® 22MS
Product Description: A clay thickened, synthetic based grease with molybdenum disulfide for use in anti-friction bearings and where superior load carrying and sliding surface protection performance is required.
Specification: MIL - G - 81827
NATO Specification: S-758
Joint Service Designation: N/A
MIL-SPEC Scope: This specification covers the requirements for one grade of grease for use as a lubricant on heavily loaded sliding steel surfaces.
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Synthetic Hydro- carbon Based Grease
Good Good
Not Accept-able to Poor
Very Good
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-408-9635 — 1.75 lb. Can
9150-01-345-6449 — 14 oz. Cartridge
30
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
31
For Questions or Comments, please call +1 (203) 573-4595
Product Description: Aircraft and instrument, gear bearing, and actuator screw grease. An advanced synthetic ester based grease paired with a lithium stearate thickener and robust additives that impart corrosion, oxidation and rust inhibition for extreme pressure anti-wear properties. This system is designed for highly loaded actuators, gears, and high-speed bearings as well as instruments over broad temperatures.
Specification: MIL - PRF - 23827 TYPE 1
NATO Specification: G-354
Joint Service Designation: XG-287 MIL-SPEC Scope: This specification covers the requirements for one grade of grease for use at extremely low temperatures on aircraft and instruments. This grease is effective in the temperature range from -73 to 121 °C. The type I grease is identified by NATO code Number G-354. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 3 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Synthetic
Ester Based Grease
Poorto
Good
Fair to
Good
Poor to
Fair
Very Good
Poor to
FairPoor Good Poor Poor
Poor to
Fair
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-00-935-4017 Type 1 14 oz. Cartridge
9150-00-985-7244 Type 1 4 oz. Tube
9150-00-985-7245 Type 1 8 oz. Tube
9150-00-985-7246 Type 1 1.75 lb. Can
9150-00-985-7247 Type 1 6.5 lb. Can
9150-00-985-7248 Type 1 35 lb. Can
Royco® 27
30
For Questions or Comments, please call +1 (203) 573-4595
31
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
Royco® 43
Product Description: A lithium based grease system used for specific heterogeneous materials applications.
Specification: SAE - AMS - 4343
NATO Specification: G-392
Joint Service Designation: N/A
MIL-SPEC Scope: N/A
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 3 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Synthetic
Ester Based Grease
Poorto
Good
Fair to
Good
Poor to
Fair
Very Good
Poor to
FairPoor Good Poor Poor
Poor to
Fair
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-00-119-9291 — 2 oz. Tube
9150-00-269-8255 — 1.75 lb. Can
32
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
33
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A specialized anti-seize compound that has been formulated to delicately balance electrical conductivity needs with corrosion resistant metal/metal alloy contact suitability.
Specification: SAE - AMS - 2518
NATO Specification: S-720
Joint Service Designation: ZX-38 MIL-SPEC Scope: N/A Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 YearsNATO 4 Years
Tariff Code: 2712.00.9020
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Mineral Grease
Good Good
Not Accept-able to Poor
Very Good
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
Royco® 44
32
For Questions or Comments, please call +1 (203) 573-4595
33
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
Royco® 46
Product Description: Semi fluid grease for precision machinery that is synthetic based and thickened with lithium stearate. Modern additive technology provides corrosion, oxidation, rust inhibition and anti-wear performance.
Specification: MIL - L - 46000
NATO Specification: O-158
Joint Service Designation: XG-485 MIL-SPEC Scope: This specification covers a semi-fluid lubricant for automatic weapons operating within a temperature range of -54 to +127 °C ( -65 to +260 °F). The lubricant is identified by Military Symbol LSA and NATO Code Number O-158. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 2 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Synthetic
Ester Based Grease
Poorto
Good
Fair to
Good
Poor to
Fair
Very Good
Poor to
FairPoor Good Poor Poor
Poor to
Fair
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container
9150-00-935-6597 — 2 fl oz. Bottle
9150-00-889-3522 — 4 fl oz. Bottle
9150-00-687-4241 — 1 quart Can
9150-00-753-4686 — 1 gal. Can
34
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
35
For Questions or Comments, please call +1 (203) 573-4595
Product Description: Mineral oil based grease with an inorganic gel thickener and micro-fine molybdenum disulfide that is compounded with additives to impart oxidation resistance, water washout, and both fresh and salt-water corrosion protection.
Specification: MIL - DTL - 23549
NATO Specification: G-392
Joint Service Designation: XG-271 MIL-SPEC Scope: This specification covers the requirements for one type and grade of a general purpose molybdenum disulfide grease for extended use at temperatures up to 177 °C (350 °F) and for brief periods of use at temperatures up to 204 °C (400 °F). Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Mineral Grease
Good Good
Not Accept-able to Poor
Very Good
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-235-5555 — 6.5 lb. Can
9150-00-823-8047 — 35 lb. Can
9150-00-985-7316 — 1.75 lb. Can
Royco® 49
34
For Questions or Comments, please call +1 (203) 573-4595
35
For Questions or Comments, please call +1 (203) 573-4595
PERFORMANCE COMPOUNDS & GREASES
Royco® 64
Product Description: A synthetic based grease system that is formulated for outstanding oxidation and water resistance performance over a very broad temperature operating envelope. Designed specifically for heavily loaded sliding surface protection.
Specification: MIL - G - 21164
NATO Specification: G-353
Joint Service Designation: XG-276
MIL-SPEC Scope: This specification covers the requirements for one grade of low and high temperature molybdenum disulfide grease for use as a lubricant on heavily loaded sliding steel surfaces. This grease is identified by NATO Symbol G-353 Military Symbol GMD.
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 3 YearsNATO 3 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Royco® Synthetic
Ester Based Grease
Poorto
Good
Fair to
Good
Poor to
Fair
Very Good
Poor to
FairPoor Good Poor Poor
Poor to
Fair
Very Good
PoorPoor to
FairPoor
National Stock Number Grade Amount Container9150-00-935-4018 — 14 oz. Cartridge9150-00-754-2595 — 1.75 lb. Can9150-00-223-4004 — 6.5 lb. Can9150-00-965-2003 — 35 lb. Can9150-01-219-1629 — 20 kg. Drum
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
36
For Questions or Comments, please call +1 (203) 573-4595
37
For Questions or Comments, please call +1 (203) 573-4595
Product Description: An blend of highly refined hydrocarbons and additives that offers excellent corrosion inhibition, low-temperature fluidity and water displacing capability. Originally designed for the most stringent requirements to maintain the military’s small arms this lubricant will meet the needs of any demanding application/environment where performance is in demand.
Specification: MIL - PRF - 32033
NATO Specification: O-190 (obsolete)
Joint Service Designation: OX-18 (obsolete) MIL-SPEC Scope: This specification covers one type and grade of water-displacing, preservative lubricating oil, known hereinafter as “oil”, for general purpose applications at low temperatures. The oil can be applied by dipping, brushing, or by spraying from gas-pressurized cans. The oil is identified by Military Symbol PL-S and NATO Code Number O-190. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-231-6689 — 1 quart Can
9150-00-231-9045 — 1 gal. Can
9150-00-231-9062 — 5 gal. Can
9150-00-281-2060 — 55 gal. Drum
Royco® 308CA
36
For Questions or Comments, please call +1 (203) 573-4595
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
37
For Questions or Comments, please call +1 (203) 573-4595
Royco® 315
Product Description: A highly refined mineral oil-based lubricating oil blended with modern additives for rust and corrosion inhibition and improved water displacing characteristics.
Specification: MIL - PRF - 3150
NATO Specification: O-192
Joint Service Designation: N/A MIL-SPEC Scope: This specification covers one grade of preservative lubricating oil. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 2 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-231-2361 — 1 quart Can
9150-00-231-2356 — 5 gal. Can
9150-00-231-2357 — 55 gal. Drum
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
38
For Questions or Comments, please call +1 (203) 573-4595
39
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A general-purpose lubricant for instrument and wide range of airframe components for both military and civilian aircraft. It is suitable for use over a wide temperature range.
Specification: MIL - PRF - 7870
NATO Specification: O-142
Joint Service Designation: OM-12 MIL-SPEC Scope: This specification covers one grade of general purpose, low temperature lubricating oil.
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Hydraulic
OilsGood Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-542-1430 — 4 oz. Can
9150-00-263-3490 — 1 quart Can
9150-00-273-2397 — 1 gal. Can
9150-00-281-9438 — 55 gal. Drum
Royco® 363
38
For Questions or Comments, please call +1 (203) 573-4595
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
39
For Questions or Comments, please call +1 (203) 573-4595
Royco® 482
Product Description: An ashless, anti-corrosion preservative and “fly away” fluid for piston engines. Developed with highly refined petroleum base oils and a finely-tuned additive system Royco® 482 is developed to minimize the effects of ambient humidity and to neutralize acidic moieties from internal combustion engines’ oil oxidation/combustion by-products.
Specification: MIL - C - 6529 TYPE 2
NATO Specification: C-609
Joint Service Designation: N/A
MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.
Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 YearsNATO 3 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Turbine Oils Good Good
Not Accept-able to Poor
Very Good
GoodPoor to
FairGood
Poor to
Good
Fair to
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
40
For Questions or Comments, please call +1 (203) 573-4595
41
For Questions or Comments, please call +1 (203) 573-4595
Product Description: An ashless, anti-corrosion preservative and “fly away” fluid for turbine engines. Formulated with a balanced ashless, anti-corrosion additive system and highly refined petroleum base oils this fluid protects turbine engines by minimizing the effects of ambient humidity and neutralizing acidic oxidation/combustion by-products. This preservative is recommended for gas turbine engines normally lubricated with mineral based fluids.
Specification: MIL - C - 6529 TYPE 3
NATO Specification: C-610
Joint Service Designation: OX-11 MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified. Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Turbine Oils Good Good
Not Accept-able to Poor
Very Good
GoodPoor to
FairGood
Poor to
Good
Fair to
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
Royco® 483
40
For Questions or Comments, please call +1 (203) 573-4595
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
41
For Questions or Comments, please call +1 (203) 573-4595
Royco® 581
Product Description: A convenient CONCENTRATE of an ashless, anti-corrosion additive system and highly refined petroleum base oils that are designed to protect aircraft engines by minimizing the effects of ambient humidity and by neutralizing acidic oxidation/combustion by-products. Easy to dilute for immediate use and uncompromising protection during short to long term storage. This CONCENTRATE has robust design for added use as a preservative for industrial gasoline/diesel fueled engines, industrial gearboxes and machine tools.
Specification: MIL - C - 6529 TYPE 1
NATO Specification: C-608
Joint Service Designation: ZX-21
MIL-SPEC Scope: This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.
Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 3 Years
Tariff Code: 2710.19.4000
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
42
For Questions or Comments, please call +1 (203) 573-4595
43
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A low viscosity blend of highly refined mineral oils and additives that achieve strong load carrying capacity and corrosion/oxidation inhibition, all while through a wide temperature operating range. Designed for application in gear boxes and specified helicopter transmissions.
Specification: MIL - PRF - 6086 GRADE L
NATO Specification: O-153
Joint Service Designation: OEP-30 (equivalent)
MIL-SPEC Scope: This specification covers two grades of petroleum-based lubricating oils for gears. This oil is identified by NATO Code Numbers O-153 and O-155.
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Turbine Oils Good Good
Not Accept-able to Poor
Very Good
GoodPoor to
FairGood
Poor to
Good
Fair to
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-265-9417 Grade L 1 gal. Can
9150-00-223-4116 Grade L 5 gal. Can
Royco® 586L
42
For Questions or Comments, please call +1 (203) 573-4595
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
43
For Questions or Comments, please call +1 (203) 573-4595
Royco® 586M
Product Description: A blend of highly refined mineral oils and additives that achieve excellent load carrying capacity and corrosion/oxidation inhibition. A higher viscosity and load carrying capacity than Royco® 586L Lubricating Oil. Designed for application in gear boxes and specified helicopter transmissions.
Specification: MIL - PRF - 6086 GRADE M
NATO Specification: O-155
Joint Service Designation: OEP-70 MIL-SPEC Scope: This specification covers two grades of petroleum-based lubricating oils for gears. This oil is identified by NATO Code Numbers O-153 and O-155. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 4 Years
Tariff Code: 2710.19.4000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Mineral Turbine Oils Good Good
Not Accept-able to Poor
Very Good
GoodPoor to
FairGood
Poor to
Good
Fair to
GoodGood
Very Good
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-240-2235 Grade M 1 pt. Can
9150-00-223-4130 Grade M 1 gal. Can
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
44
For Questions or Comments, please call +1 (203) 573-4595
45
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A synthetic based coolant engineered for use in avionics and other electronics. Specifically designed for hydrolytic stability and dielectric performance.
Specification: MIL - PRF - 87252
NATO Specification: S-1748
Joint Service Designation: N/A
MIL-SPEC Scope: This specification describes the characteristics and provides the requirements for a -54 to 200 °C synthetic hydrocarbon fluid for use in electronic applications. This fluid is identified by NATO Code No. S-1748.
Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 5 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Buna N
Ethylene
Flurocarbon (Viton®)
FluorosiliFaircone
Nitrile (N
497-70)
Nitrile (N
674-70)
Polyacrylate
Propylene
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Hydrocarbon
FluidPoor Poor Good Good Fair Good Good Poor Poor
National Stock Number Grade Amount Container
9150-01-306-2475 — 1 quart Can
9150-01-304-0885 — 1 gal. (Round)
9150-01-336-7174 — 1 gal. (Oblong)
9150-01-306-2470 — 55 gal. Drum
Royco® 602
44
For Questions or Comments, please call +1 (203) 573-4595
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
45
For Questions or Comments, please call +1 (203) 573-4595
Royco® 634E
Product Description: An advanced military weapons system lubricant that is engineered for cleaning, lubrication, and preservation of both small and large caliber arms through a wide range of environmental conditions. Technically sophisticated to serve the military and useful in many other demanding lubrication requirements.
Specification: MIL - PRF - 63460 - E
NATO Specification: S-758
Joint Service Designation: N/A
MIL-SPEC Scope: This specification describes the performance requirements and verification methods for a type of LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS. This product is for use in cleaning, lubricating and short-term preservation of small and large caliber military weapons, operating in the temperature range of -51 to +71 °C (-60 to +160 °F).
Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 4 YearsNATO 3 Years
Tariff Code: 3403.99.0000
National Stock Number Grade Amount Container
9150-01-102-1473 — 0.5 fl oz. Bottle
9150-01-079-6124 — 4 fl oz. Bottle
9150-01-054-6453 — 1 pt. Sprayer
9150-01-327-9631 — 1 liter Sprayer
9150-01-053-6688 — 1 gal. Bottle
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
46
For Questions or Comments, please call +1 (203) 573-4595
47
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A synthetic ester based lubricant engineered for some the most advanced aerospace applications - ranging from delicate gyro bearing through high speed bearings to complex electronic equipment. This fluid is formulated with low-volatility in mind as is a great choice general aircraft lubrication.
Specification: MIL - PRF - 6085
NATO Specification: O-147
Joint Service Designation: OX-14 (equivalent) MIL-SPEC Scope: This specification covers one grade of aircraft instrument lubricating oil only. The lubricating oil is identified by military symbol OAI and NATO Code No. 0-147. Shelf Life: (Please refer to shelf life descriptions on page 52.)US Military 3 YearsCommercial 5 YearsNATO 4 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Hydraulics Good Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
National Stock Number Grade Amount Container
9150-00-664-6518 — 1.5 oz. Bottle
9150-00-257-5449 — 4 oz. Can
9150-00-223-4129 — 1 quart Can
9150-01-311-5640 — 1 gal. Can
9150-01-018-8959 — 5 gal. Can
Royco® 885
46
For Questions or Comments, please call +1 (203) 573-4595
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
47
For Questions or Comments, please call +1 (203) 573-4595
Royco® HF-825
Product Description: A specially designed system to facilitate assembly of small parts. Designed with a high “tack” to allow parts to temporarily remain in place while being assembled.
Specification: N/A
NATO Specification: N/A
Joint Service Designation: N/A
MIL-SPEC Scope: N/A
Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 5 Years
Tariff Code: 3403.99.0000
Compatibility: (†See page 49.)
Material:
Acrylonitrile
acrylonitrile-butadiene rubber (Perbunan
®)
Butyl rubber
Flurocarbon (Viton®)
Methacrylate
Natural rubber/latex
poly (ethylene)
Polyamide (N
ylon)
polychloroprene (N
eoprene®)
Polyester
PTFE (Teflon®)
Polyvinyl chloride (PVC)
Silicone
Styrene-butadiene or styrene-butadiene rubber
(SBR) or Buna S
Synthetic Hydraulics Good Good
Not Accept-able to Poor
Accept-able
GoodPoorto
FairGood
Poorto
Good
Fairto
GoodGood
Accept-able
Poorto
Good
Poor to
GoodPoor
SPECIALTY APPLICATION & PERFORMANCE FLUIDS
48
For Questions or Comments, please call +1 (203) 573-4595
49
For Questions or Comments, please call +1 (203) 573-4595
Product Description: A specialized fractionation of a Stoddard solvent with stabilizing additives to prevent the formation of gums and peroxides for use in the calibration of fuel system components in both reciprocating and gas turbine aircraft engines.
Specification: MIL - PRF - 7024 TYPE 2
NATO Specification: O-158
Joint Service Designation: N/A MIL-SPEC Scope: This specification covers the requirements for three types of calibrating fluid used in the calibration of aircraft fuel system components. Shelf Life: (Please refer to shelf life descriptions on page 52.)Commercial 2 Years
Tariff Code: 2710.11.4500
Compatibility: (†See page 49.)
Royco® 950
48
For Questions or Comments, please call +1 (203) 573-4595
49
For Questions or Comments, please call +1 (203) 573-4595
DISCLAIMER
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
Material Royco® Mineral Oil Based Hydraulic Fluid
Royco® Synthetic Hydraulic Fluid
Acrylonitrile Good Good
acrylonitrile-butadiene rubber (Perbunan®) Good Good
Butyl rubber Not Acceptable - Poor Not Acceptable - Poor
Flurocarbon (Viton®) Acceptable Acceptable
Methacrylate Good Good
Natural rubber/latex Poor - Fair Poor - Fair
poly(ethylene) Good Good
Polyamide (Nylon) Poor - Good Poor - Good
polychloroprene (Neoprene®) Fair - Good Fair - Good
Polyester Good Good
Polytetrafluoroethylene (PTFE or Teflon®) Acceptable Acceptable
Polyvinyl chloride (PVC) Poor - Good Poor - Good
Silicone Poor - Good Poor - Good
Styrene-butadiene or styrene-butadiene rubber (SBR) or Buna S
Poor Poor
† Hydraulic Fluid Material CompatibilityAnderol Specialty Lubricants, a division of Chemtura Corporation, does not make warranty the compatibility of any material with Royco Hydraulic Fluids. A true understanding of material compatibility may only be had after careful consideration of the material’s composition and the intended application’s conditions and performance requirements. Material and equipment manufacturer’s recomenations should be followed.
Mineral Hydraulic Oils - Royco® SSF, LGF, 717, 756, 756A, 757, 783
Synthetic Hydraulic Oils - Royco® 770, 782
APPENDIX
50
For Questions or Comments, please call +1 (203) 573-4595
51
For Questions or Comments, please call +1 (203) 573-4595
Turbine Engine Oil Elastomer Material Compatibility
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
Material Royco® Mineral Turbine Oil
Royco® Synthetic Turbine Oil
Acrylonitrile Good Poor - Good
acrylonitrile-butadiene rubber (Perbunan®) Good Poor - Good
Butyl rubber Not Acceptable - Poor Poor - Fair
Flurocarbon (Viton®) Very Good Very Good
Methacrylate Good Poor - Fair
Natural rubber/latex Poor - Fair Poor
poly(ethylene) Good Good
Polyamide (Nylon) Poor - Good Poor
polychloroprene (Neoprene®) Fair - Good Poor
Polyester Good Good
Polytetrafluoroethylene (PTFE or Teflon®) Very Good Very Good
Polyvinyl chloride (PVC) Poor - Good Poor
Silicone Poor - Good Poor - Fair
Styrene-butadiene or styrene-butadiene rubber (SBR) or Buna S
Poor Poor
Mineral Turbine Oils - Royco® 481
Synthetic Turbine Oils - Royco® 500, 555, 560, 808, 899
50
For Questions or Comments, please call +1 (203) 573-4595
51
For Questions or Comments, please call +1 (203) 573-4595
APPENDIX
Grease Elastomer Material Compatibility
Teflon®, Viton®, and Neoprene® are registered trademarks of DuPontPerbunan® is a registered trademark of Lanxess
Material Royco® Mineral Oil Based Grease
Royco® Synthetic Hydrocarbon Based
Grease
Royco® Synthetic Ester Based Grease
Acrylonitrile Good Good Poor - Good
acrylonitrile-butadiene rubber (Perbunan®) Good Good Fair - Good
Butyl rubber Not Acceptable - Poor
Not Acceptable - Poor Poor - Fair
Flurocarbon (Viton®) Very Good Very Good Very Good
Methacrylate Good Good Poor - Fair
Natural rubber/latex Poor - Fair Poor - Fair Poor
poly(ethylene) Good Good Good
Polyamide (Nylon) Poor - Good Poor - Good Poor
polychloroprene (Neoprene®) Fair - Good Fair - Good Poor
Polyester Good Good Poor - Fair
Polytetrafluoroethylene (PTFE or Teflon®) Very Good Very Good Very Good
Polyvinyl chloride (PVC) Poor - Good Poor - Good Poor
Silicone Poor - Good Poor - Good Poor - Fair
Styrene-butadiene or styrene-butadiene rubber (SBR) or Buna S
Poor Poor Poor
Mineral Greases - Royco® 1MS, 11MS, 44, 49
Synthetic Hydrocarbon Based Greases - Royco® 22CF, 22MS
Synthetic Ester Based Greases - Royco® 27, 43, 46, 64
APPENDIX
52
For Questions or Comments, please call +1 (203) 573-4595
Product to Tariff Code Cross-Reference
Fluid Tariff Code Fluid Tariff Code
ROYCO® LGF 2710.19.3080 ROYCO® 555 3403.99.0000
ROYCO® SSF 2710.19.3080 ROYCO® 560 3403.99.0000
ROYCO® 1MS 2710.19.4000 ROYCO® 581 2710.19.4000
ROYCO® 11MS 2710.19.4000 ROYCO® 586L 2710.19.4000
ROYCO® 22CF 3403.99.0000 ROYCO® 586M 2710.19.4000
ROYCO® 22MS 3403.99.0000 ROYCO® 602 3403.99.0000
ROYCO® 27 3403.99.0000 ROYCO® 634E 3403.99.0000
ROYCO® 43 3403.99.0000 ROYCO® 717 2710.19.4000
ROYCO® 44 2712.00.9020 ROYCO® 756 2710.19.4000
ROYCO® 46 3403.99.0000 ROYCO® 757 2710.19.4000
ROYCO® 49 2710.19.4000 ROYCO® 770 3403.99.0000
ROYCO® 64 3403.99.0000 ROYCO® 782 3403.99.0000
ROYCO® 308CA 2710.19.4000 ROYCO® 783 2710.19.4000
ROYCO® 315 2710.19.4000 ROYCO® 808 3403.99.0000
ROYCO® 363 2710.19.4000 ROYCO® HF-825 3403.99.0000
ROYCO® 481 2710.19.4000 ROYCO® 885 3403.99.0000
ROYCO® 482 2710.19.4000 ROYCO® 899 3403.99.0000
ROYCO® 483 2710.19.4000 ROYCO® 950 2710.11.4500
ROYCO® 500 3403.99.0000
Shelf Life Notes:US Military Type II shelf life items may be retested to conformance with the applicable specification - at which time the material is reapproved for use for another shelf life period. All the products listed herein are classified as Type II.
Commercial The United States Government Defense General Supply Center has defined shelf life or retest periods which are more conservative than those defined by Anderol Specialty Lubricants, a division of Chemtura Corporation.
NATO Defined according to NATO STANAG 3149 (EDITION 9 DATED 2 FEB 2006).
North America:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura Corporation215 Merry LaneEast Hanover, New Jersey 07936 Technical Service: +1.973.887.7410 Customer Service: +1.203.573.4595 Fax: +1.203.573.2324 email: [email protected] www.anderol.com
Europe, Middle East and Africa:ANDEROL B.V.P.O. Box 14896201 BL MaastrichtThe NetherlandsTel: +31.43.352.41.90Fax: +31.43.352.41.99email: [email protected]
Mexico and Latin America North:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura CorporationCalzada de Guadalupe No. 410, Cuautitlan, Edo. de Mexico Tel: (52 55) 5010 6549 (52 55) 5010 6581 (52 55) 5010 6611 Fax: (52 55) 5010 6565email: PerformanceProducts-Latinoamerica@ chemtura.com www.anderol.com
Latin America South:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura CorporationAv. Brasil, 5333 - Distrito Industrial, CEP 13505-600 Rio Claro - SP Tel: +55-19-3522-5000 Customer Care: 0800 970-6082 Fax: +55-19-3527-0955email: PerformanceProducts-Latinoamerica@ chemtura.com www.anderol.com
Asia and the Pacific:ANDEROL SPECIALTY LUBRICANTSa Division of Chemtura CorporationRoom 1703-1705,No. 1568 Century Avenue, Shanghai 200122 China Tel: +86-21-3866 6688Fax: +86-21-6876 0772email: [email protected]
CONTACT ANDEROL SPECIALTY LUBRICANTS TODAYAnderol Specialty Lubricants, a division of Chemtura Corporation, is your source for the highest quality specialty lubricants. Our customer relationship and technical professionals are ready to assist you with your specific application needs. For additional information on any of our products, call, e-mail, or visit our web site today.
Customer Service: (203) 573-4595 E-mail: [email protected]
Web: www.anderol.com
Product data and Material Safety Data Sheets (MSDS) for our specialty fluids are available upon request.
Anderol Specialty Lubricants markets a wide variety of synthetic and specialty fluids under the ANDEROL® and ROYCO® registered trademarks. These products are used with confidence globally and are designed with leading technology for use in the aerospace & defense, commercial, and industrial markets.
If you would like improved performance from your critical equipment, call us
today. We are pleased to discuss our lubricants, provide additional technical
data, and offer advice on specialty lubrication issues.
WARRANTY: ALL PRODUCTS PURCHASED FROM ANDEROL SPECIALTY LUBRICANTS, A DIVISION OF CHEMTURA CORPORATION AND ITS GLOBAL SUBSIDIARIES ARE SUBJECT TO THE TERMS AND CONDITIONS SET OUT IN THE APPLICABLE SALES CONTRACT, ORDER ACKNOWLEDGEMENT, AND/OR BILL OF LADING. ANDEROL SPECIALTY LUBRICANTS WARRANTS ONLY THAT ITS PRODUCTS WILL MEET ANDEROL’S STANDARD WRITTEN SPECIFICATIONS FOR THE SUBJECT PRODUCT IN EFFECT AT THE TIME OF SHIPMENT OR THE WRITTEN SPECIFICATIONS FOR THE SUBJECT PRODUCT SET OUT IN THE APPLICABLE SALES CONTRACT, ORDER ACKNOWLEDGEMENT, AND/OR BILL OF LADING, AS APPLICABLE. ANDEROL NEITHER MAKES NOR INTENDS, NOR DOES IT AUTHORIZE ANY BUYER, AGENT OR REPRESENTATIVE TO MAKE, ANY OTHER WARRANTIES, EXPRESS OR IMPLIED AND, TO THE EXTENT PERMITTED BY LAW, IT EXPRESSLY EXCLUDES AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING, WITHOUT LIMITATION, ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALL OTHER INFORMATION SUPPLIED BY ANDEROL SPECIALTY LUBRICANTS IS BELIEVED TO BE ACCURATE BUT IS FURNISHED UPON THE EXPRESS CONDITION THAT THE CUSTOMER OR USER SHALL MAKE ITS OWN ASSESSMENT TO DETERMINE THE PRODUCT’S USE AND/OR SUITABILITY FOR A PARTICULAR PURPOSE. NO WARRANTY, OF ANY KIND EXPRESS OR IMPLIED, IS MADE BY ANDEROL REGARDING SUCH OTHER INFORMATION, THE DATE UPON WHICH THE SAME IS BASED, OR THE RESULTS OBTAINED FROM THE USE THEREOF, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY THAT THE PRODUCT SHALL BE MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, OR THAT THE USE OF SUCH OTHER INFORMATION OR PRODUCT WILL NOT INFRINGE ANY PATENT. BEFORE USING ANY CHEMICAL, READ AND ABIDE BY THE TERMS OF ITS LABEL AND MATERIAL SAFETY DATA SHEET.
Authorized Distributor:
ANDEROL Specialty Lubricants - September 2012. ROYCO Aero - 100 - 1MPrinted in U.S.A.
Aerospace and Defense Fluids are proudly brought to you by: