rs-20 permanent roof anchorr - best materials · tile roof #2816 - rs-20 - shown for size...
TRANSCRIPT
RS-20 PERMANENT ROOF ANCHORR
8522-216th St. Woodinville, WA 98072-8009Phone: 425-488-8868 or Fax: 360-668-1717
www.superanchor.come-mail: [email protected]
The RS-20 is one of the forerunners in our famous “RS Series” of Permanent Roof Anchors. This is a permanent, low profile, OSHA 5,000 pound fall arrest rated anchor that comes with all attach-ment hardware and instructions. The RS-20 is perfect for both new construction and retrofitting applications and can be used with tile, slate, wood shake, metal and asphalt shingle roofing materials.
#2816 Retofitted onto Asphalt Shingle Roof for Maintenance
#2816 Being used by Sider for Fall Protection
• Permanent Roof Anchor for Tile, As-phalt Shingle, Wood Shake, Metal and Slate Roofing
• Can be Retrofitted or Installed on New Construction
• Surface Mounted, Low Profile Design Does Not Detract from Roof Aesthetics
• Use on all High/Low Profile Tile Roof-ing
• Stainless Steel Construction & Fasten-ers
• Rated for OSHA 5,000 pound Fall Arrest
#2816 RS-20 Installed on to Wood Shake Roof
•
•
•
#2816 Installed on Low & High Profile Tile
8522-216th St. Woodinville, WA 98072-8009Phone: 425-488-8868 or Fax: 360-668-1717
www.superanchor.comE-mail: [email protected]
The Best in Fall Arrest!RS-20
The RS-20 is a permanent, low profile roof anchor that works with High/low Profile Tile, Slate, Wood Shake, Metal and Asphalt Composition Roofing materials. It can be retofitted onto existing roofs or installed at the building stage on new construction. The low profile design does not detract from the aesthetics of the roof surface and can be utilized for OSHA Fall Arrest. This versatile anchor point can be used on the wall surface, too.
Retail Information: Specifications:
MSRP:......................................................................$33.00 Material (Anchor):......................................................20 GA Stainless Steel Description:...........................RS-20 Fall Protection Anchor Material (D-Ring):.........................................................Di-Chromate D-Ring Part Number:..........................................................#2816 Fasteners:........................................8 - Spiral Shank Nails (Part #2013A) Shipping Weight:.........................................................2 lbs. Capacity:................................................................310 pounds user weight UPC Code:.................................................786158281606 Breaking Strength:........................................................Minimum 5,000 lbs. Compliance:.................................................................................OSHA/ANSI
Lay out the RS-20 to your specifications and use if for fall protection
The D-ring exposure can be adjusted by moving the RS-20 up/down slope
#2816 with #4001 Deluxe Lifeline on Hi Profile Tile Roof
#2816 - RS-20 - Shown for size reference.
#2815T - Tile Roof RetroFit. This anchor is basically 2 RS-20’s put together. Instead of installing one RS-20 on each side of the ridge, you only need to install one Tile Roof RetoFit.
#2815 - RetroFit Anchor. This is our most popular RS Series of Anchor. Simply install it under the ridge cap for a permanent, low profile fall arrest anchor point.
#2813 - RS-10. This anchor is essentially one-half of a RetroFit anchor. Perfect for lower shed roofs where there is not a typical ridge.
35.0”
17.5”
13.0”
7.5”
#2815T - 35” 40”#2816 - 17.5” 20”#2815 - 13” 18”#2813 - 7.5” 10”
Strap TotalLength Length