CI/SfB

(53.3) xOctober 2010

Horizontal and vertical water heaters

Aquaheat SS

Unv

entedwater

heaters

The new range of Aquaheat SS unvented horizontal and vertical water heaters are available in 50 – 100 litre capacities.Whilst the attractive, modern design makes the Santon water heaters perfect for wall mounting, they are also ableto be mounted within air conditioning ceiling voids. With no sacrificial anode necessary there is no need for regularmaintenance checks or costly replacements. The superior heat loss characteristics and resultant energy efficiencyperfectly demonstrates Santon’s commitment to providing performance and value for money.

Using only high grade Duplex stainless steel the cylinders are manufactured in our own factory in the UnitedKingdom. Fully tested to meet stringent UK and European safety standards, these lowmaintenance, high performanceheaters are supplied with a 10 year cylinder warranty with on-site service support.

Features and benefits

• A choice of 50, 80 or 100 litre capacities

• Factory-fitted temperature and pressure relief valve

• Temperature gauge

• Expansion vessel

• Cold water control kit

• Installation brackets

• Neon indicator light

• Detailed fitting instructions

• Ideal for use in:Ceiling voids or risers (central voids)Remote areasWashrooms with multiple basins (toilet cores)Student accommodationHoliday homes

Unv

entedwater

heaters

Aquaheat SSHorizontal and vertical water heaters

SPECIFICATION ADVICE: 01603 420128 E-MAIL: specifier@santon.co.uk

Commercial UnventedSelection GuideCapacity of NumberWater Heater of Basins

50 litres 4–5

80 litres 5–8

100 litres 8–10

Note: These figures are for guidanceonly and local conditions should betaken into account when sizing theinstallation. For full details contactour Specification Advice Hotline on01603 420128 or fax 01603 420229

SpecificationRating3kW @ 240v.

ElementLong life Incalloy 825 element and plate.

Outer casingWhite painted steel, stove enamelled corrosion resistant.

Insulation38mm thick CFC/HCFC-free (ODP zero) flame retardant expandedpolyurethane.

ThermostatElectromechanical capillary type adjustable from 10ºC to 70ºC.

SafetyFactory-fitted temperature and pressure relief valve set at 90ºC and 10 bar.Pressure reducing valve at 3.5 bar. Non return valve. Pressure relief valve at 6 bar.Expansion vessel. Over-temperature capillary cut-out set at 85ºC.All units pressure tested to 15 bar. IPX 4 rated.

AnodeNone required.

ApprovalsBEAB and kiwa approved. Manufactured in the UK in our BS EN ISO9001:2008 registered factory.

InstallationFixingHorizontally or vertically wall-mounted with brackets provided.

Plumbing3/4" BSP Male connections.

Maximum working pressure10 bar.

Electrical240v AC, 50/60Hz.

GuaranteeThe Aquaheat SS duplex stainless steel cylinder carries a full 10 year on-siteparts and labour transferable guarantee against faulty manufacture ormaterials provided that:

• It has been correctly installed as per the instructions contained in theinstruction manual and all relevant Codes of Practice and Regulations inforce at the time of installation.

• It has not been modified in any way other than by Santon or Heateam.

• It has not been frost damaged.

• It has only been used for the storage of potable water.(Max 250mg/l chloride)

• Following commissioning the unit is put into service within a period of7 days. If this is not the case it must either be drained or regularly flushed.

• It has not been tampered with or been subjected to misuse or neglect.

• Within 60 days of installation the user completes and returns thecertificate supplied along with proof of purchase to register the product.

• It has been installed in the United Kingdom.

All other components carry a 2 year guarantee.

Technical Specification

Unv

entedwater

heaters

Model Product Code

H50 94:050:047H80 94:050:049H100 94:050:051V50 94:050:053V80 94:050:055V100 94:050:057

Dimensions

Ordering Guide

Model Capacity A B C D E(mm) (mm) (mm) (mm) (mm)

H50 50 litre 695 451 475 105 100H80 80 litre 953 451 475 105 100H100 100 litre 1141 451 475 105 100V50 50 litre 695 470 475 238 100V80 80 litre 953 470 475 238 100V100 100 litre 1141 470 475 238 100

C

D EB

400min

A

D E

C 400min

A

B

Vertical

Horizontal

The pace of product development is such that we reserve the right to change product specifications without notice.We do, however, strive to ensure that all information in this catalogue is accurate at the time of going to publication.

© October 2010 Issue 1 part no. 94 900 021

National Service Network

A nationwide network of experienced engineers is available to providefast and efficient on-site service support if required. Spare parts forSanton products are readily available through a network of approvedspares stockists.

ProductsUnvented Water Heating PremierPlus | Aquaheat | Aquaheat SS | Aqualine

Solar Unvented Water Heating PremierPlus Solar

Vented Water Heating Aquarius | Taps

Drinking Water Speediboil

Hand Hygiene EV 2008 | Aqua-dri

Instantaneous Water Heating PowerPack

Combination Storage R Unit

Rectangular Heating and Storage DFB

Immersions Industrial

SpecificationTel: 01603 420128 Fax: 01603 420229 E-mail: specifier@santon.co.uk

After Sales ServiceTel: 0844 871 1530 Fax: 0844 871 1528 E-mail: santonservice@heateam.co.uk

Websitewww.santon.co.uk

Santon, Hurricane Way, Norwich, Norfolk, NR6 6EA