rtn 980 product overview(v100r003c00_04)-20101030

5/24/2018 RTN 980 Product Overview(V100R003C00_04)-20101030

1/34

OptiX RTN 980 Radio Transmission SystemV100R003C00

Product Overview

Issue 04

Date 2010-10-30

HUAWEI TECHNOLOGIES CO., LTD.


2/34


3/34

Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the commercial contract made between

Huawei and the customer. All or partial products, services and features described in this document may not

be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all

statements, information, and recommendations in this document are provided AS ISwithout warranties,guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Issue 04 (2010-10-30)Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.i
http://www.huawei.com/mailto:[email protected]:[email protected]://www.huawei.com/


4/34


5/34

OptiX RTN 980 Radio Transmission System

Product Overview Contents

Issue 04 (2010-10-30) Huawei Proprietary and Confidential

Copyright Huawei Technologies Co., Ltd.

iii

Contents

1 Introduction.................................................................................................................................1-1

1.1 Network Application ............................................................... ................................................................ ......1-1

1.2 Benefits .............................................................. ................................................................ ...........................1-3

2 Architecture.................................................................................................................................2-1

2.1 Overview.......................................................................................................................................................2-1

2.2 Hardware Architecture ............................................................. ............................................................... ......2-3

2.2.1 IDU ........................................................... ............................................................... ............................2-3

2.2.2 ODU.....................................................................................................................................................2-6

2.3 Software Structure.........................................................................................................................................2-7

2.3.1 NMS Software ............................................................... ................................................................ ......2-7

2.3.2 IDU Software.......................................................................................................................................2-7

2.3.3 ODU Software ............................................................... ................................................................ ......2-8

3 Products and Application Scenarios ......................................................................................3-13.1 Typical Networking Modes ................................................................ ........................................................... 3-1

3.1.1 Multi-directional Nodal Convergence..................................................................................................3-1

3.1.2 Large-Capacity Microwave Convergence Ring ........................................................ ...........................3-2

3.1.3 Upstream Networking..........................................................................................................................3-3

4 Operation and Maintenance ....................................................................................................4-1

4.1 Network Management Solution.....................................................................................................................4-1

4.2 Web LCT.......................................................................................................................................................4-1T

4.3 U2000............................................................................................................................................................4-3

A Acronyms and Abbreviations............................................................................................... A-1


6/34


7/34


Product Overview 1 Introduction



1-1

1 IntroductionThe OptiX RTN 980 is one of

system.

the series products of the OptiX RTN 900 radio transmission

1.1 Netwo

new generation split microwave transmission system developed by

seamless microwave transmission solution for a mobile

OptiX RTN 90 amily

e N 950,

d O

U of the OptiX RTN 910 is 1U high and supports one or two IF boards.

.

rk Application

The OptiX RTN 900 is a

Huawei. It can provide a

communication network or private network.

0 Product F

Th OptiX RTN 900 products are available in three types: OptiX RTN 910, OptiX RT

an ptiX RTN 980. The users can choose an appropriate type based on the actualrequirements.

The ID

The IDU of the OptiX RTN 950 is 2U high and supports one to six IF boards.

The IDU of the OptiX RTN 980 is 5U high and supports one to fourteen IF boards

The OptiX RTN 900 series products support the same IF boards and service interface boards.

The OptiX RTN 900 products provide several types of service interfaces and facilitate

installation and flexible configuration. It can provide a solution that is integrated with the

TDM microwave, Hybrid microwave, and Packet microwave based on the networkrequirements. It supports the smooth upgrade from the TDM microwave to the Hybridmicrowave, and from the Hybrid microwave to the Packet microwave. The solution can

lve based on the service changes that occur due to radio mobile network evolution. Thus,solution can meet the transmission requirements of not only 2G and 3G networks, but

OptiX RTN 98

The OptiX RTN 980 is the large-capacity nodal microwave equipment at the convergence

layer, supports the convergence of up to 14 microwave links, and supports multiple protection

evothis

also future LTE and 4G networks.

0

Figure 1-1shows the microwave transmission solution that is provided by the OptiX RTN

980.


8/34

1 Introduction


Product Overview

1-2 Huawei Proprietary and Confidential


Issue 04 (2010-10-30)

schemes.Figure 1-1shows the microwave transmission solution that is provided by the OptiXRTN 980.

Figure 1-1Microwave transmission solution provided by the OptiX RTN 980

TDM Network

(SDH)

STM-1/4STM-1/4

GE

OptiX RTN 980 BSCRNCOptiX RTN 910/950

Radio link Cable/fiber

Regional

backhaul

network

Ethernet Network

(Metro)

Raido trassmission network

FE/GE

STM-1/4

ATM

FE/GE

Packet Network

(PTN)

FE/GE

In the solution, the OptiX RTN 980 can be connected to the RNC and BSC directly or through the

regional backhaul network.

(TDM) network or packet switching network (PSN).

The OptiX RTN 980 supports the pseudo wire emulation edge-to-edge (PWE3)technology, and therefore TDM and ATM services can be backhauled through a PSN.

The OptiX RTN 980 provides a wide range of interfaces and service bearer technologies to adapt tothe regional backhaul network. The regional backhaul network can be a time-division multiplexing


9/34





1-3

1.2 Benefits

Integrated IP Radio with High Bandwidth and High Efficiency

The OptiX RTN 980 supports integrated IP microwave, high bandwidth, and hightransmission efficiency.

The air interfaces provide channel bandwidth from 7 MHz to 56 MHz and support AMmodes from QPSK to 256 QAM.

The integrated IP radio is capable of transmitting any or severail of the following threetypes of services: Native E1/STM-1, Native Ethernet, and packet services encapsulated

through PWE3. The types of services can be configured by using software. Therefore,the OptiX RTN 980 supports a smooth upgrade from the Hybrid radio to the Packetradio.

The OptiX RTN 980 supports flexible configuration of the transmission modes of

various services. The equipment can transmit TDM E1 services, IMA E1 services, andEthernet services in Native mode or in PWE3 mode.

Each channel of the IP-based radio supports a maximum of 75 Native E1 services or twoSTM-1 services and a maximum Ethernet throughput of 400 Mbit/s.

The OptiX RTN 980 supports XPIC. The 56 MHz RF channel supports a maximumEthernet throughput of 800 Mbit/s.

The OptiX RTN 980 supports adaptive modulation (AM) for improving spectralefficiency and ensuring the availability of the services with a higher priority. In addition,priority levels can be set for Native E1 services and packet services.

Figure 1-2Adaptive modulation

Channel

Capability

E1 Services

256QAM

32QAM

QPSK

256QAM

128QAM

32QAM

128QAM

64QAM

64QAM

16QAM

16QAM

Ethernet

Services


10/34

1 Introduction


Product Overview



Issue 04 (2010-10-30)

New-Generation Multi-Function IF Boards The new-generation multi-function IF boards ISU2/ISX2 support various services over

air interfaces, so that the requirements of all the service application scenarios are met.The supported services type over air interfaces include:

Native E1+ Ethernet

Native STM-1+Native Ethernet

1xSTM-1 or 2xSTM-1

Adopts the optimized air interface QoS technology, which supports quick forwarding of

high-priority services and therefore reduces transmission delay.

Adopts a highly efficient encapsulation technology and therefore increasing the packetservice throughput over the air interface.

Large-Capacity and Network-Oriented Nodal Equipment

TheOptiX RTN 980 is the large-capacity and network-oriented Nodal equipment.

One OptiX RTN 980 subrack supports a maximum of radio links in 14 directions.

Supports the convergence of the TDM radio, Hybrid radio, and Packet radio services.

Adopts the TDM/Packet dual-plane design based on the same platform. The equipment isa type of large-capacity and network-oriented equipment.

Provides a higher order cross-connect capacity of 128x128 VC-4s and a lower ordercross-connect capacity equivalent to 32x32 VC-4s for TDM services.

Provides a packet switching capacity of 22 Gbit/s.

Provides multiple RF configuration modes, and supports XPIC, N+0 protection, 1+1protection, and N+1 protection.

The TDM plane uses the same platform as that of the OptiX MSTP equipment, embedsan MADM, and therefore allows interconnection between the OptiX RTN 980 and the

OptiX MSTP equipment.

The packet service plane provides various Ethernet service processing functions.

Supports the MPLS and PWE3 technologies that emulate and encapsulate TDM E1services, IMA E1 services, and Ethernet services and transmit the services throughMPLS tunnels.

Supports E-line or E-LAN services based on VLAN, QinQ. Supports E-line servicesbased on PW.

Provides various protections for packet services.

Provides various QoS functions.

Provides various OAM functions, including Ethernet OAM, MPLS OAM, ATMOAM, and PW OAM

The OptiX RTN 980 can be directly interconnected with the OptiX PTN packettransmission equipment.

Supports end-to-end service grooming by using the U2000 on the network consisting ofthe OptiX RTN 980 only or the network consisting of the OptiX RTN 980 and other

equipment.

Complete Protection Scheme and Highly Reliable Network

Table 1-1describes the protection capability of the OptiX RTN 980.


11/34





1-5

Table 1-1Protection schemes

Item Protection Capability

Power input 1+1 hot backup

Internal powermodule

1+1 hot backup

Equipment-level

protection

Control, switching,and timing board

1+1 hot backup

1+1 HSB/SD/FD protectionRadio links

N+1 protection

MPLS MPLS tunnel 1:1 protection

PW PW 1:1 protection

LAG protection (including FE/GE ports andradio links)

Ethernet

ERPS protection (including FE/GE ports andradio links)

MSTP protection (including FE/GE ports and

radio links)

ATM over E1 IMA protection

TDM services

(VC-12/VC-4)

SNCP (including radio links and SDH lines)

STM-1 1+1 or 1:N linear multiplex section protection

(MSP)

Network-level

protection

STM-4 1+1 or 1:1 Linear MSP

Two-fiber bi-directional MSP ring


12/34


13/34


Product Overview 2 Architecture



2-1

2 Architecture2.1 Overview

The OptiX RTN 980 adopts a split structure. The system consists of the IDU 980 and the

IDU 980

stem. It accesses services, performs

multiplexing/demultiplexing and IF processing of the services, and provides system control

T 1lists the basic features

T ction of the IDU

ODU. An ODU is connected to an IDU through an IF cable.

The IDU 980 is the indoor unit of an OptiX RTN 980 sy

and communication function.

able 2- of the IDU 980.

able 2-1Introdu 980

Item Performance

Chassis height 5U

Pluggable Supported

Number of microwave

directions

1 to 14

RF configuration mode on

onfiguration

1+1 protection configuration

N+1 protection configuration

XPIC configuration

1+0 non-protection configurati

N+0 non-protection c


14/34

2 Architecture


Product Overview



Issue 04 (2010-10-30)

Figure 2-1IDU 980

ODU

The ODU is the outdoor unit of the OptiX RTN 900. It performs frequency conversion andamplification of signals.

There are two methods of mounting the ODU and the antenna: direct mounting and separatemounting.

The direct mounting method is normally adopted when a small-diameter and

single-polarized antenna is used. In this situation, if one ODU is configured for oneantenna, the ODU is directly mounted at the back of the antenna. If two ODUs are

configured for one antenna, an RF signal combiner/splitter (hereinafter referred to as ahybrid coupler) must be mounted to connect the ODUs to the antenna. Figure 2-2showsthe direct mounting method.

Figure 2-2Direct mounting


15/34





2-3

The separate mounting method is adopted when a double-polarized antenna orbig-diameter and single-polarized antenna is used. Figure 2-3shows the separate method.In this situation, a hybrid coupler can be mounted. That is, two ODUs share one feedboom.

Figure 2-3Separate mounting

The OptiX RTN 980 provides an entire frequency band antenna solution, and supports thesingle-polarized antenna and dual-polarized antenna with a diameter of 0.3 m to 3.7 m and the

corresponding feeder system.

2.2 Hardware Architecture

2.2.1 IDU

The IDU 980 is the indoor unit of the OptiX RTN 980.

The IDU 980 adopts the card plug-in design. It can implement different functions byconfiguring different types of boards. All the service boards support hot-swapping.


16/34

2 Architecture


Product Overview



Issue 04 (2010-10-30)

Figure 2-4IDU slot layout

Slot 15 (CSHN)

Slot 1 (EXT)

Slot 5 (EXT)

Slot 3 (EXT)

Slot 2 (EXT)

Slot 4 (EXT)

Slot 6 (EXT)

Slot 28

(FAN)

Slot 7 (EXT) Slot 8 (EXT)

Slot 9 (EXT)

Slot 13 (EXT)

Slot 11 (EXT)

Slot 10 (EXT)

Slot 12 (EXT)

Slot 14 (EXT)

Slot 20 (CSHN)

Slot 26 (PIU) Slot 27 (PIU)

The EXT represents an extended slot, which can be inserted with various IF boards and interface boards.

Table 2-2List of IDU boards

BoardName

FullSpelling Valid Slot Description

CSHN Hybridcontrol,

switching,and timingboard

Slot 15/20 Supports the TDM cross-connect function,provides 128x128 VC-4 higher order

cross-connections and VC-12/VC-3 lowerorder cross-connections equivalent to32x32 VC-4s.

Supports the 22 Gbit/s packet switchingfunction.

Performs system communication andcontrol.

Processes clocks and provides one clockinput/output interface.

Provides one network managementinterface, one network management serialport, and one NE cascading interface.

Uses the SFP module to provide twoSTM-1 or STM-4 optical interfaces.

Provides two GE interfaces (Each GEinterface can use an RJ-45 electrical

interface or an SFP optical interfaceindependently.)


17/34





2-5

Board FullValid Slot DescriptionName Spelling

ISU2 Universal IF

board

Slot 1 to slot

14

Provides one IF interface

Supports integrated IP microwave andSDH microwave. The supported servicemodes can be Native E1+Ethernet, Native

STM-1+Ethernet or SDH (1xSTM-1 or2xSTM-1).

Supports AM function.

Supports highly efficient encapsulationtechnology

ISX2 Universal

XPIC IFboard

Slot 1 to slot14

Provides one IF interface

Supports integrated IP microwave and

SDH microwave. The supported service

modes can be Native E1+Ethernet, NativeSTM-1+Ethernet or SDH (1xSTM-1 or

2xSTM-1).

Supports the XPIC function.


Supports highly efficient encapsulation

technology

IF1 SDH IF

board

Slot 1 to slot

14

Provides one IF interface.

Supports the TU-based PDH microwavesolution and the STM-1-based SDH

microwave solution.

IFU2 Universal IFboard

Slot 1 to slot14


Supports the integrated IP microwave .


IFX2 Universal

XPIC IFboard

Slot 1 to slot14


Supports the integrated IP microwave .

Supports the XPIC function.

Supports the AM function.

SL1D 2xSTM-1interfaceboard

Slot 1 to slot14 Uses the SFP module to provide two STM-1optical interfaces.

EM6T 6 Port RJ45

Ethernet/Gig

abit EthernetInterfaceBoard

Slot 1 to slot

14

Provides four FE electrical interfaces.

Provides two GE electrical interfaces that

are compatible with the FE electricalinterface.


18/34

2 Architecture


Product Overview



Issue 04 (2010-10-30)

Board FullValid Slot DescriptionName Spelling

EM6F 4 Port RJ45

+ 2 Port SFPFast

Ethernet/Gig

abit EthernetInterfaceBoard

Slot 1 to slot

14

Provides four FE electrical interfaces.

Uses the SFP module to provide two GEoptical or electrical interfaces. The GEelectrical interfaces are compatible with

the FE electrical interfaces.

ML1 16xE1

(smart)tributaryboard

Slot 1 to slot

14

Provides sixteen 75-ohm or 120-ohm

smart E1 interfaces.

Supports CES E1, IMA E1, and fractionalE1.

MD1 32xE1

(smart)tributaryboard

Slot 1 to slot

14

Provides thirty-two 75-ohm or 120-ohm

smart E1 interfaces. Supports CES E1, IMA E1, and fractional

E1.

SP3S 16xE1

tributaryboard

Slot 1 to slot

14

Provides sixteen 75-ohm or 120-ohm TDM

E1 interfaces.

SP3D 32xE1

tributaryboard

Slot 1 to slot14

Provides thirty-two 75-ohm or 120-ohmTDM E1 interfaces.

AUX Auxiliary

interfaceboard

Slot 1 to slot

14

Provides one orderwire interface, one

asynchronous data interface, onesynchronous data interface, and four-inputand two-output external alarm interfaces.

PIU Power board Slot 26 orslot 27

Provides one -48 V/-60 V DC power input.

FAN Fan board Slot 28 Cools and ventilates the IDU.

2.2.2 ODU

The ODU is an integrated system and is of various types. The structures and working

principles of various types of ODUs are the same.


19/34





2-7

Block Diagram

Figure 2-5Block diagram of the ODU

Antenna port

CTRL

Tx IF

Rx IF

Cable port

PWR

Up-conversionMultiplexer

O&M

uplink

O&M

downlink

DC

Down-conversion

AMP

LNA

Synthesizers

Duplexer

Rx RF

Tx RF

2.3 Software Structure

The OptiX RTN 980 software consists of the NMS software, IDU software, and ODUsoftware.

Figure 2-6shows the software structure. The NMS software communicates with the NE

software through the Qx interface. The Qx interface uses the OptiX private management

protocol.

Figure 2-6Software structure

NMS software

Qx interface

IDU software ODU software

2.3.1 NMS Software

Huawei provides a transmission network management solution that meets the requirements ofthe telecommunication management network (TMN) for managing all the OptiX RTN

products and other OptiX series transmission products on the network.

2.3.2 IDU Software

The IDU software consists of the NE software and the board software.

The NE software manages, monitors, and controls the running status of the IDU. Through theNE software, the NMS communicates with the boards, and controls and manages the NE. The


20/34

2 Architecture


Product Overview



Issue 04 (2010-10-30)

NE software communicates with the ODU software to manage and control the running of theODU.

The board software manages and controls the running status of other boards of the IDU except

the system control, switching, and timing board. The board software of the EM6T/EM6F

board is stand-alone and runs in the CPU of the board. The board software of the boardsexcept the EM6T/EM6F board in the IDU is integrated as software modules with the NE

software and runs in the CPU of the system control, switching, and timing board.

2.3.3 ODU Software

The ODU Software manages and controls the running status of the ODU. The ODU softwarecontrols the running of the ODU based on the parameters transmitted by the IDU software.

The ODU running status is reported to the IDU software.


21/34


Product Overview 3 Products and Application Scenarios



3-1

3 Products and Application ScenariosTo provide solutions to different service a

various networking modes to meet differe

pplication scenarios, the OptiX RTN 980 supports

nt requirements of the customers.

3.1.1 Multi-directional Nodal Convergence

tiX RTN 980 can support the nodal convergence of up to 14 radio links in different

Network Diagram

As nodal microwave equipment, the OptiX RTN 980 supports the convergence of

large-capacity radio links in multi-directions. Figure 3-1provides an example.

3.1 Typical Networking Modes

The OptiX RTN 980 supports various networking modes.

The Opdirections, and support various transmission modes in the upstream direction.


22/34

3 Products and Application Scenarios


Product Overview



Issue 04 (2010-10-30)

Figure 3-1Multi-directional Nodal Convergence

Regional network

OptiX RTN 980 OptiX RTN 910/950

Packet radio link

Cable/fiber

Hybrid radio link TDM radio link

Convergence of Radio Links Supports the convergence of up to 14 radio links in different directions.

Supports the convergence of TDM radio links, Hybrid radio links, and Packet radio linksat the same time.

Supports the convergence of microwave chain subnets and the microwave ring subnets.

Upstream Transmission Supports the convergence of the TDM microwave services and Hybrid microwave

services, and then transmission of them to the TDM network and the metropolitanEthernet network in upstream direction in Native mode.

Supports the convergence of the Packet microwave services, and then direct transmissionof them to the PSN in the upstream direction by swapping MPLS labels.

Supports the convergence of the TDM microwave services and Hybrid microwaveservices, encapsulation of them by the PWE3/MPLS protocol, and then transmission ofthem to the PSN as gateway equipment.

3.1.2 Large-Capacity Microwave Convergence Ring

The OptiX RTN 980 can form a large-capacity convergence ring and support various

protection schemes for a ring network.

Network Diagram

OptiX RTN 980 can form a large-capacity convergence ring. Figure 3-2provides an example.


23/34





3-3

Figure 3-2Large-capacity convergence ring

MPLS tunnel 1:1/ERPS/SNCP

OptiX RTN 980 Radio linkRadio chains and/or

radio sub-rings

Types of Radio Links

The OptiX RTN 980 on the convergence ring can converge the services on themicrowave sub-ring or microwave sub-link.

The radio links on the convergence ring can adopt XPIC, N+1, and other RFconfiguration modes to achieve large-capacity transmission.

When adopting Hybrid radio links, the convergence ring can converge the Hybridmicrowave services or TDM microwave services directly.

When adopting Packet radio links, the convergence ring can do as follows:

Converge the Packet microwave services at the access layer and transmit them to thePSN directly for service backhaul.

Converge the Hybrid microwave services or TDM microwave services, encapsulate

them into packet signals through the MPLS/PWE3 technology on the OptiX RTN 980,and transmit them to the PSN directly for service backhaul.

Protection Schemes

On the Hybrid microwave convergence ring, the TDM services can be configured withSNCP, and the Ethernet services can be configured with ERPS.

On the Packet microwave convergence ring, the services can be configured with theMPLS tunnel 1:1 protection or PW 1:1 protection.

3.1.3 Upstream Networking

The OptiX RTN 980 can form a ring network with the upstream equipment, or can be

connected to the upstream equipment through a protection link, to achieve reliable service

backhaul.


24/34

3 Products and Application Scenarios


Product Overview



Issue 04 (2010-10-30)

Upstream Networking of TDM Services

The OptiX RTN 980 can form a two-fiber bidirectional MS shared protection ring with SDH

equipment through the STM-4 ports, or can be connected to MSTP equipment through the

STM-1/STM-4 ports configured with the 1+1/1:1 linear MSP. Figure 3-3provides an example

of the upstream networking of TDM services.

Figure 3-3Upstream ring network of TDM services

TDM Network

STM-16Linear MSP

or ring MSP

OptiX RTN 980 NG-SDHRadio transmissionsub-network

Upstream Networking of Ethernet ServicesThe OptiX RTN 980 can form an ERPS ring with the metropolitan area network (MAN)

equipment through the GE ports, or can be connected to the MAN equipment through theFE/GE ports configured with the LAG protection. Figure 3-4provides an example of the

upstream networking of Ethernet services.


25/34





3-5

Figure 3-4Upstream ring network of Ethernet services

ERPS

Metro Network

OptiX RTN 980 MSTP/MetroRadio transmission

sub-network

Upstream Networking of MPLS Services

The OptiX RTN 980 can form a ring network or a mesh network with MPLS packet switchingequipment through the GE ports. MPLS tunnel 1:1 protection is adopted. Figure 3-4provides

an example of the upstream networking of MPLS services.

Figure 3-5Upstream ring network of MPLS services

OptiX RTN 980

MPLS

tunnel 1:1

Packet Network

PTN Radio transmissionsub-network


26/34


27/34


Product Overview 4 Operation and Maintenance



4-1

4 Operation and MaintenanceBy using the Huawei iManager network managem

operate and maintain the OptiX RTN 980.

ent system, the user can conveniently

4.1 Network Management Solution

aw olution compliant with TMN for

diffe ion networks.

The NM solutions include the following:

nt system

smission network

Hu ei provides a complete transport network management s

rent function domains and customers on telecommunicat

iManager U2000 Web LCT local maintenance terminal

iManager U2000 unified network manageme

Figure 4-1Network management solution to the tran

Network-level NM iManagerU2000

Local craft terminaliManager U2000

Web LCT

4.2 Web LC

The Web LCT is a local maintenance terminal. The Web LCT provides the following

gement functions at the NE layer: NE management, alarm management, performancegement, configuration management, communication management, and security

na

T

manamana

ma gement.


28/34

4 Operation and Maintenance


Product Overview



Issue 04 (2010-10-30)

NE Management

ch of NEs

ition/Deletion of NEs

ment

rm monitoring strategies

rmance monitoring strategies

registers

Configuration Ma

onfiguration

ion

ration

tion

Communicatio M

anagement

C protocol management

ol management

ent

Security Mana m

anagement

NE security parameters

NE security log

NMS user management

Sear

Add

Login or logout of NEs NE time manage

Alarm Management Setting of ala

View of alarms

Deletion of alarms

Performance Management Setting of perfo

View of performance events

Resetting of performance

nagement Basic NE information c

Radio link configurat

Protection configu

Interface configura

Service configuration

Clock configuration

n anagement Communication parameter m

DCC management

HWEC

IP protoc

OSI protocol managem

Inband DCN management

ge ent NE user management

NE user group m

LCT access control

Online user management

NMS log management


29/34


Product Overview 4 Operation and Maintenance



4-3

4.3 U2000

The U2000 is a network-level network management system. A user can access the U2000h a U2000 client to manage Huawei transport subnets in the unified manner. The

00 e NE-level management function, but also the managementfunct

NE Level Manage

ent

ration management

n management

Network Leve

ent

ement

Network level communication management

anagement

nagement

Others

ement

Database management

Report function

Northbound SNMP, CORBA and XML interface

server throug

U2 0 can provide not only thion at the network layer.

ment NE object management

NE level alarm management

NE level performance managem

NE level configu

NE level communicatio

NE level security management

l Management Topology management

Network level alarm management

Network level performance managem

Network level configuration manag

Network level security m

Network-wide clock ma

Inventory manag

Log management


30/34


31/34


Product Overview A Acronyms and Abbreviations



A-1

A Acronyms and AbbreviationsA ms and abbreviati etical order.

TM synchronous Transfer Mode

PC utomatic Transmit Power Control

C ase Station Controller

S lass of Service

CN ata Communication Network

CP ifferentiated Services Code Point

RPS thernet Ring Protection Switching

TSI uropean Telecommunications Standards Institute

crony ons are listed in alphab

A

AM Adaptive Modulation

APS Automatic Protection Switching

A A

AT A

B

BS B

C

Co C

D

DC Direct Current

DCC Data Communications Channel

D D

DS D

E

E-LAN Ethernet-LAN

EoPDH Ethernet Over PDH

E E

E E


32/34

A Acronyms and Abbreviations


Product Overview

A-2 Huawei Proprietary and Confidential


Issue 04 (2010-10-30)

F

FD Frequency Diversity

SB ot Standby

M itless Switch Mode

ency

IP

tional Telecommunication Union - Telecommunicationtandardization Sector

Terminal

MSP inear Multiplex Section Protection

E ong Term Evolution

g

SP ultiplex Section Protection

TP ultiple Spanning Tree Protocol

S etwork Management System

AM perations, Administration and Maintenance

H

H H

HS H

I

IDU Indoor Unit

IF Intermediate Frequ

IMA Inverse Multiplexing for ATM

Internet Protocol

ITU-T InternaS

L

LAG Link Aggregation Group

LCT Generation-Local Craft

L L

LT L

M

MPLS MultiProtocol Label Switchin

MADM Multi Add-Drop Multiplexer

M M

MS M

N

NM N

O

O O


33/34


Product Overview A Acronyms and Abbreviations



A-3

ODU utdoor Unit

W seudo Wire

E3 seudo Wire Emulation Edge to Edge

S uality of Service

er

SL eceived Signal Level

N adio Transmission Node

rchy

P onnection Protection

tocol

sage

TM-1 DH Transport Module -1

M-N DH Transport Module -N

DM ime Division Multiplex

N elecommunication Management Network

O

P

PDH Plesiochronous Digital Hierarchy

P P

PW P

Q

Qo Q

R

RF Radio Frequency

RNC Radio Network Controll

RNC Radio Network Controller

R R

RT R

S

SD Space Diversity

SDH Synchronous Digital Hiera

SFP Small Form-Factor Pluggable

SNC SubNetwork Connection

SNC Sub-Network C

SNMP Simple Network Management Pro

SP Strict Priority

SSM Synchronization Status Mes

S S

ST S

T

T T

TM T


34/34

A Acronyms and Abbreviations


Product Overview

A-4 Huawei Proprietary and Confidential


Issue 04 (2010-10-30)

V

VC Virtual Container

VC-12

ner -3

C-4 irtual Container -4

AN irtual LAN

X

XPIC Cross-polarization Interference Cancellation

Virtual Container -12

VC-3 Virtual Contai

V V

VL V

rtn 980 product overview(v100r003c00_04)-20101030

Documents

huawei trademarks

huawei proprietary

product overviewv100r003c00

optix rtn

huawei industrial basebantian

purchased scope

usage scope

commercial contract