rules for construction of nuclear facility … 2015/asme bpvc-iii...appendices asme bpvc.iii.a-2015...

APPENDICES

ASME BPVC. I I I .A-2015

2015 ASME Boiler andPressure Vessel CodeAn International Code

SECTION I I IRules for Construct ion ofNuclear Faci l i ty Components

IIIRULES FOR CONSTRUCTIONOF NUCLEAR FACILITYCOMPONENTS

AppendicesASME Boiler and Pressure Vessel Committeeon Nuclear Power

AN INTERNATIONAL CODE

2015 ASME Boiler &Pressure Vessel Code2015 Edition July 1, 2015

Two Park Avenue • New York, NY • 10016 USA

Date of Issuance: July 1, 2015

This international code or standard was developed under procedures accredited as meeting the criteria forAmerican National Standards and it is an American National Standard. The Standards Committee that approvedthe code or standard was balanced to assure that individuals from competent and concerned interests havehad an opportunity to participate. The proposed code or standard was made available for public review and com-ment that provides an opportunity for additional public input from industry, academia, regulatory agencies, andthe public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with any

items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard areexpressly advised that determination of the validity of any such patent rights, and the risk of infringement of suchrights, is entirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as

government or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the es-

tablished ASME procedures and policies, which precludes the issuance of interpretations by individuals.The endnotes and preamble in this document (if any) are part of this American National Standard.

ASME collective membership mark

Certification Mark

The above ASME symbol is registered in the U.S. Patent Office.

“ASME” is the trademark of The American Society of Mechanical Engineers.

No part of this document may be reproduced in any form, in an electronicretrieval system or otherwise, without the prior written permission of the

publisher.

Library of Congress Catalog Card Number: 56-3934Printed in the United States of America

Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015.

The American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990

Copyright © 2015 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERS

All rights reserved

TABLE OF CONTENTS

List of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvForeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviiStatement of Policy on the Use of the Certification Mark and Code Authorization in Advertising . . . . . . . . . . xixStatement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . . . . . . . . . . . xixSubmittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . . . . . . . . . . . xxPersonnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiiIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxixOrganization of Section III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xliiSummary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xlvList of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xlixCross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . liMandatory Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Mandatory Appendix I Design Fatigue Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Mandatory Appendix II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26II-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26II-1200 Permissible Types of Noncyclic Tests and Calculation of Stresses . . . . . 26II-1300 Test Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27II-1400 Interpretation of Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27II-1500 Cyclic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28II-1600 Determination of Fatigue Strength Reduction Factors . . . . . . . . . . . . . . . 32II-1700 Experimental Stress Analysis of Openings . . . . . . . . . . . . . . . . . . . . . . . . . 32II-1800 Experimental Determination of Stress Indices for Piping . . . . . . . . . . . . 33II-1900 Experimental Determination of Flexibility Factors . . . . . . . . . . . . . . . . . . 33II-2100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34II-2200 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34II-2300 Test Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34II-2400 Stress Intensification Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35II-2500 Variations in Materials and Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36II-2600 Test Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Mandatory Appendix III Stress Intensity Values, Allowable Stress Values, Fatigue StrengthValues, and Mechanical Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Mandatory Appendix IV Approval of New Materials Under the ASME Boiler and PressureVessel Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Mandatory Appendix V Certificate Holder’s Data Report Forms, Instructions, and Applica-tion Forms for Certificates of Authorization for Use of Certifica-tion Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Mandatory Appendix VI Rounded Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71VI-1100 Acceptance Standards for Radiographically Determined Rounded Indi-

cations in Welds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Mandatory Appendix XI Rules for Bolted Flange Connections for Class 2 and 3 Componentsand Class MC Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

XI-1100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80XI-2100 Material Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82XI-3100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83XI-3200 Class RF Flange Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

iii

Mandatory Appendix XII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99XII-1100 Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Mandatory Appendix XIII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101XIII-1100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101XIII-2100 Methods of Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Mandatory Appendix XIV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114XIV-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114XIV-1200 Analysis for Cyclic Service of Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114XIV-1300 Analysis for Cyclic Service of Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116XIV-1400 Analysis for Thermal Stress Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Mandatory Appendix XVIII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118XVIII-1100 Procedure for Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Mandatory Appendix XIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126XIX-1100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126XIX-1200 Design Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Mandatory Appendix XXI Adhesive Attachment of Nameplates . . . . . . . . . . . . . . . . . . . . . . . . . . . 129XXI-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Mandatory Appendix XXII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130XXII-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130XXII-1200 Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130XXII-1300 Design Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Mandatory Appendix XXIII Qualifications and Duties of Specialized Professional Engineers . . 134XXIII-1100 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134XXIII-1200 Qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134XXIII-1300 Duties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Supplement 1 Nonmandatory Guidelines for Demonstrating PE Qualifications . . . 139

Supplement 2 Nonmandatory Guidelines for Establishing ASME Code Knowledge 140

Supplement 3 Nonmandatory Sample Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Mandatory Appendix XXIV Standard Units for Use in Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Mandatory Appendix XXV ASME-Provided Material Stress–Strain Data . . . . . . . . . . . . . . . . . . . . . 151XXV-1100 Stress–Strain Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Mandatory Appendix XXVI Rules for Construction of Class 3 Buried Polyethylene PressurePiping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

XXVI-1100 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152XXVI-1200 Qualification of Polyethylene Material Organizations . . . . . . . . . . . . . . . . 152XXVI-1300 Certificate Holder Responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152XXVI-2100 General Requirements for Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153XXVI-2200 Polyethylene Compound and Material Requirements . . . . . . . . . . . . . . . . 153XXVI-2300 Polyethylene Material Fusing Verification Testing . . . . . . . . . . . . . . . . . . 158XXVI-2400 Repair of Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159XXVI-2500 General Requirements for Quality Testing and Documentation . . . . . . . 159XXVI-3100 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163XXVI-3200 Soil and Surcharge Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166XXVI-3300 Temperature Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167XXVI-3400 Seismic Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168XXVI-4100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177XXVI-4200 Forming, Fitting, and Aligning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178XXVI-4300 Fusing Qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179XXVI-4400 Rules Governing Making, Examining, and Repairing Fused Joints . . . . . 182XXVI-4500 Mechanical Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

iv

XXVI-4600 Pipe Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184XXVI-4700 Thrust Collars Using Polyethylene Material . . . . . . . . . . . . . . . . . . . . . . . . 184XXVI-5100 General Requirements for Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . 185XXVI-5200 Examinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186XXVI-5300 Acceptance Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186XXVI-5400 Qualification and Certification of NDE Personnel . . . . . . . . . . . . . . . . . . . 187XXVI-5500 Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188XXVI-6100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189XXVI-6200 Hydrostatic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189XXVI-6300 Pressure Test Gages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190XXVI-8100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193XXVI-9100 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Supplement XXVI-I Polyethylene Standards and Specifications . . . . . . . . . . . . . . . . . . . . . . 195

Supplement XXVI-II Ultrasonic Examination of High Density Polyethylene . . . . . . . . . . . . 195

Supplement XXVI-III Data Report Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

Supplement XXVI-A Fusing Machine Operator Qualification Training . . . . . . . . . . . . . . . . 200

Supplement XXVI-B Unacceptable Fusion Bead Configurations . . . . . . . . . . . . . . . . . . . . . . 203

Supplement XXVI-C Alternative Seismic Analysis Method . . . . . . . . . . . . . . . . . . . . . . . . . . . 204Nonmandatory Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Nonmandatory Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205A-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205A-2100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206A-2200 Stress Intensities, Displacements, Bending Moments, and Limiting Va-

lues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207A-3100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209A-3200 Stress Intensities, Bending Analysis, Displacements, and Edge Loads . . 210A-4100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215A-5100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217A-5200 Loads, Displacements, and Geometry Constants . . . . . . . . . . . . . . . . . . . . 217A-6100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221A-6200 Method of and Procedure for Discontinuity Analysis . . . . . . . . . . . . . . . . 221A-7100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228A-8100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229A-9100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242A-9200 Interaction Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242A-9300 Allowable Loads and Stresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243A-9400 New Interaction Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244A-9500 Determination of Allowable Bending Strength of Beams by the Apparent

Stress Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

Nonmandatory Appendix B Owner’s Design Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253B-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253B-1200 Scope of Certified Design Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253B-2100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 254B-2200 Operability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258B-2300 Regulatory Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258B-3100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 259B-4100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 260B-4200 Operability Requirements for Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260B-4300 Regulatory Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260B-5100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 261B-5200 Operability Requirements for Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261B-5300 Regulatory Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

v

B-6100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 263B-7100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 264B-8100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 265B-8300 Regulatory Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265B-9100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 266B-10100 Certified Design Specification Requirements . . . . . . . . . . . . . . . . . . . . . . . 268

Nonmandatory Appendix C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269C-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269C-1200 Thermal Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270C-1300 Structural Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270C-1400 Fatigue Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

Nonmandatory Appendix D Preheat Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272D-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272D-1200 Ferrous Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272

Nonmandatory Appendix E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275E-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275E-1200 Design Cross‐Sectional Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

Nonmandatory Appendix F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277F-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277F-1200 Intent of Level D Service Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277F-1300 Level D Service Limits and Design Rules . . . . . . . . . . . . . . . . . . . . . . . . . . 277F-1400 Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

Nonmandatory Appendix G Fracture Toughness Criteria for Protection Against Failure . . . . . . . 287G-2100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288G-2200 Level A and B Service Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288G-2300 Level C and D Service Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294G-2400 Hydrostatic Test Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294G-3100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295G-4100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

Nonmandatory Appendix L Class FF Flange Design for Class 2 and 3 Components and Class MCVessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297

L-1100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297L-2100 Material Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298L-3100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299L-3200 Design of Flanges and Bolting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

Nonmandatory Appendix M Recommendations for Control of Welding, Postweld Heat Treat-ment, and Nondestructive Examination of Welds . . . . . . . . . . . . . . 312

M-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312M-1200 Welding Procedure Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312M-1300 Welding Performance Qualification and Assignment . . . . . . . . . . . . . . . . 313M-1400 Control of Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313M-1500 Nondestructive Examination of Welds . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313M-1600 Postweld Heat Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313M-1700 Examination and Dimensional Inspection . . . . . . . . . . . . . . . . . . . . . . . . . 313

Nonmandatory Appendix N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314N-1100 Introduction and Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314N-1200 Seismic Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315N-1300 Flow‐Induced Vibration of Tubes and Tube Banks . . . . . . . . . . . . . . . . . . 342N-1400 Dynamics of Coupled Fluid‐Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359N-1500 Fluid Transient Dynamics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366N-1600 Miscellaneous Impulsive and Impactive Loads . . . . . . . . . . . . . . . . . . . . . 366N-1700 Combined Responses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368

vi

N-1800 References to Nonmandatory Appendix N . . . . . . . . . . . . . . . . . . . . . . . . . 373

Nonmandatory Appendix O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379O-1100 Scope and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379O-1200 Method of and Procedure for Load Computation . . . . . . . . . . . . . . . . . . . 380O-1300 Stress Evaluation Open System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381O-1400 Closed Discharge Systems — Open Discharge Systems With Long Dis-

charge Pipes — Systems With Slug Flow . . . . . . . . . . . . . . . . . . . . . . . . 381O-1500 Design Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 382

Nonmandatory Appendix P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383P-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383P-1200 General Required Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383P-1300 Information Required Under Specific Circumstances . . . . . . . . . . . . . . . . 383P-1400 Execution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384

Nonmandatory Appendix Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385Q-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385

Nonmandatory Appendix R Determination of Permissible Lowest Service Metal TemperatureFrom TNDT for Division 1, Classes 2 and MC; and Division 3, ClassWC Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392

R-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 392R-1200 Determination of Permissible Lowest Service Metal Temperature . . . . . 392

Nonmandatory Appendix S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394S-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394S-1200 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394S-1300 Design Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394S-1400 Responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394S-1500 Operating Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394S-1600 Shaft Failure Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395S-2100 Critical Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397S-2200 Maximum Torsional Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397S-2300 Shaft Evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397S-2400 Other Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397

Nonmandatory Appendix T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399T-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399T-1200 Total Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400

Nonmandatory Appendix U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406U-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406U-1200 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406U-1300 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406U-1400 Fabrication Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419

Nonmandatory Appendix W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423W-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423W-1200 Section XI and Plex Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425W-2100 Stress Corrosion Cracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426W-2200 General Corrosion or Wastage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432W-2300 Pitting Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436W-2400 Crevice Corrosion and Denting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438W-2500 Intergranular Corrosion Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439W-2600 MIC and Fouling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441W-2700 Environmental Effects on Fatigue-Life Crack Initiation and Growth . . . . 443W-2800 Flow-Accelerated Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444W-2900 Erosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 447W-3100 Irradiation‐Assisted Stress Corrosion Cracking (IASCC) . . . . . . . . . . . . . . 449

vii

W-3200 Thermal Aging Embrittlement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451W-3300 Irradiation Embrittlement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453W-3400 Hydrogen Damage Embrittlement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457W-4100 Fretting and Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460W-4200 Thermal Fatigue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461W-4300 Dynamic Loading—Vibration, Water Hammer, and Unstable Fluid Flow 464W-4400 Creep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468

Nonmandatory Appendix Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471Y-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471Y-2100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472Y-2200 Limitations to Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472Y-2300 Nomenclature and Definitions (See Figure Y-2300-1) . . . . . . . . . . . . . . . 472Y-2400 Evaluation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473Y-2500 Analysis Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474Y-3100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475Y-3200 Limitations to Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475Y-3300 Nomenclature and Definitions (See Figure Y-3300-1) . . . . . . . . . . . . . . . 475Y-3400 Evaluation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476Y-3500 Analysis Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477Y-4100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478Y-4200 Limitations to Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478Y-4300 Nomenclature and Definitions (See Figure Y-4300-1) . . . . . . . . . . . . . . . 478Y-4400 Evaluation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479Y-4500 Analysis Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480Y-5100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481Y-5200 Limitations to Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481Y-5300 Nomenclature and Definitions (see Figure Y-5300-1) . . . . . . . . . . . . . . . 481Y-5400 Evaluation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482Y-5500 Analysis Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483

Nonmandatory Appendix Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484Z-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484Z-1200 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484Z-1300 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484Z-1400 Other Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484Z-1500 Resumption of Code Activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485

Nonmandatory Appendix AA Guidance for the use of U.S. Customary and SI Units in the ASMEBoiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 486

Nonmandatory Appendix BB Metallic Braided Flexible Hose for Class 2 and 3 Service . . . . . . . . . 489BB-1100 Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489BB-2100 Sheaths, end Pieces, and Braids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 490BB-3100 Design Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491BB-3200 General Design Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491BB-3300 Special Design Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491BB-4100 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493BB-5100 Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494BB-6100 Hydrostatic and Pneumatic Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495BB-7100 Provisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 496

Nonmandatory Appendix CC Alternative Rules for Linear Piping Supports . . . . . . . . . . . . . . . . . . . 497CC-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497CC-2100 Material Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 498CC-3100 Design Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499CC-4100 Fabrication Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500CC-5100 Examination Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501CC-8100 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 502

viii

Nonmandatory Appendix DD Polyethylene Material Organization Responsibilities Diagram . . . . 503DD-1100 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503

Nonmandatory Appendix EE Strain-Based Acceptance Criteria Definitions and Background In-formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505

EE-1100 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505EE-1200 Background Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508

Nonmandatory Appendix FF Strain-Based Acceptance Criteria for Energy-Limited Events . . . . . . 515FF-1100 Strain-Based Acceptance Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515

Nonmandatory Appendix GG Minimum Thickness for Pipe Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519GG-1100 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519

Nonmandatory Appendix HH Rules for Valve Internal and External Items . . . . . . . . . . . . . . . . . . . . 520HH-1100 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520HH-1200 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520HH-1300 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520HH-1400 Design Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 542HH-1500 Fabrication Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543

FIGURESI-9.1 Design Fatigue Curves for Carbon, Low Alloy, and High Tensile Steels for Metal Tempera-

tures Not Exceeding 700°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4I-9.1M Design Fatigue Curves for Carbon, Low Alloy, and High Tensile Steels for Metal Tempera-

tures Not Exceeding 370°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5I-9.2 Design Fatigue Curves for Austenitic Steels, Nickel–Chromium–Iron Alloy, Nickel–Iron–

Chromium Alloy, and Nickel–Copper Alloy for Temperatures Not Exceeding 800°F . . . 7I-9.2M Design Fatigue Curves for Austenitic Steels, Nickel–Chromium–Iron Alloy, Nickel–Iron–

Chromium Alloy, and Nickel–Copper Alloy for Temperatures Not Exceeding 425°C . . . 8I-9.3 Design Fatigue Curves for Wrought 70 Copper–30 Nickel Alloy for Temperatures Not Ex-

ceeding 800°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10I-9.3M Design Fatigue Curves for Wrought 70 Copper–30 Nickel Alloy for Temperatures Not Ex-

ceeding 425°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11I-9.4 Design Fatigue Curves for High Strength Steel Bolting for Temperatures Not Exceeding

700°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12I-9.4M Design Fatigue Curves for High Strength Steel Bolting for Temperatures Not Exceeding

370°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13I-9.5 Design Fatigue Curves for Nickel–Chromium–Molybdenum–Iron Alloys (UNS N06003,

N06007, N06455, and N10276) for Temperatures Not Exceeding 800°F . . . . . . . . . . . . 14I-9.5M Design Fatigue Curves for Nickel–Chromium–Molybdenum–Iron Alloys (UNS N06003,

N06007, N06455, and N10276) for Temperatures Not Exceeding 425°C . . . . . . . . . . . . 15I-9.6 Design Fatigue Curves for Grade 9 Titanium for Temperatures Not Exceeding 600°F . . . 17I-9.6M Design Fatigue Curves for Grade 9 Titanium for Temperatures Not Exceeding 315°C . . . 18I-9.7 Design Fatigue Curves for Nickel–Chromium Alloy 718 (SB-637 UNS N07718) for Design of

2 in. (50 mm) and Smaller Diameter Bolting for Temperatures Not Exceeding 800°F(427°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

I-9.8 Design Fatigue Curves, ksi, for Ductile Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22I-9.8M Design Fatigue Curves, MPa, for Ductile Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23II-1430-1 Construction for II-1430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29II-1520(c)-1 Construction of the Testing Parameters Ratio Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30II-1520(c)-2 Construction of the Testing Parameters Ratio Diagram for Accelerated Tests . . . . . . . . . . 31II-2310-1 Schematic of Test Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34II-2330-1 Displacement D and Force F Recorded During Loading and Unloading of Test Specimen,

With Linear Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35VI-1134-1 Aligned Rounded Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73VI-1134-2 Groups of Aligned Rounded Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74VI-1136-1 Charts for t Equal to 1/8 in. to

1/4 in. (3 mm to 6 mm), Inclusive . . . . . . . . . . . . . . . . . . . . . . 75

ix

VI-1136-2 Charts for t Over 1/4 in. to3/8 in. (6 mm to 10 mm), Inclusive . . . . . . . . . . . . . . . . . . . . . . . . 75

VI-1136-3 Charts for t Over 3/8 in. to3/4 in. (10 mm to 19 mm), Inclusive . . . . . . . . . . . . . . . . . . . . . . 76

VI-1136-4 Charts for t Over 3/4 in. to 2 in. (19 mm to 50 mm), Inclusive . . . . . . . . . . . . . . . . . . . . . . . 77VI-1136-5 Charts for t Over 2 in. to 4 in. (50 mm to 100 mm), Inclusive . . . . . . . . . . . . . . . . . . . . . . . 78VI-1136-6 Charts for t Over 4 in. (100 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79XI-3120-1 Types of Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84XI-3240-1 Values of T , U , Y , and Z (Terms Involving K) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94XI-3240-2 Values of F (Integral Flange Factors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95XI-3240-3 Values of V (Integral Flange Factors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96XI-3240-4 Values of FL (Loose Hub Flange Factors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97XI-3240-5 Values of VL (Loose Hub Flange Factors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97XI-3240-6 Values of f (Hub Stress Correction Factor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98XIII-1141-1 Stress Categories and Limits of Stress Intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107XIII-2122-1 Direction of Stress Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111XIII-2124(e)-1 Nozzle Nomenclature and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113XVIII-1110-1 Constant C for Gas or Vapor Related to Ratio of Specific Heats (k = cp/cv) . . . . . . . . . . . . 123XVIII-1110-1M Constant C for Gas or Vapor Related to Ratio of Specific Heats (k =cp/cv) . . . . . . . . . . . . . 124XVIII-1140-1 Flow Capacity Curve for Rating Nozzle Type Safety Valves on Saturated Water (Based on

10% Overpressure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124XVIII-1140-1M Flow Capacity Curve for Rating Nozzle Type Safety Valves on Saturated Water (Based on

10% Overpressure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125XIX-1110-1 Applicable Configurations of Flat Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126XIX-1110-2 Integral Flat Head With Large Central Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127XXVI-2234-1 Thrust Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157XXVI-3132-1 Nomenclature for Mitered Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170XXVI-4110-1 Thermal Fusion Butt Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177XXVI-4230-1 Tapered Transition Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180XXVI-4520-1 Transition Flange Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184XXVI-5220-1 Fusion Pipe Joint Examination Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186XXVI-5321-1 Polyethylene Pipe Butt Fusion Joint O.D. Bead (Cross-Section View) . . . . . . . . . . . . . . . . . . 187XXVI-B-1 Unacceptable Fusion Bead Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203A-2120-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206A-3120-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211A-5120-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217A-5212-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218A-5213-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218A-5221-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218A-5222-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219A-6230-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222A-6230-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223A-6230-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224A-6230-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224A-6230-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224A-8120-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230A-8131-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231A-8132.1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232A-8132.2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232A-8132.3-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232A-8132.4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233A-8142-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233A-8142-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234A-8142-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235A-8142-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237A-8142-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238A-8142-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239A-8143.2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

x

A-8153-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241A-9210(d)-1 Interaction Curve for Beams Subject to Bending and Shear or to Bending, Shear, and Direct

Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243A-9523.1-1 Sign Convention and Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246A-9531-1 Bending and Shear Stresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246A-9532(c)(3)-1 Interaction Exponent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248A-9533(b)-1 Interaction Curve for Bending and Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249A-9541-1 Trapezoidal Stress–Strain Relationship . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249A-9541-2 Ultimate and Yield Trapezoidal Intercept Stresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250A-9541-3 Linearized Ultimate and Yield Bending Stresses for Rectangular Section . . . . . . . . . . . . . . 250A-9541-4 Proportional Limit As a Function of Yield Stress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251A-9542-1 Linearized Bending Stress Versus Allowable Stress for SA-672 A50 Material at 600°F

(316°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252B-2123-1 Time‐Dependent Load Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256G-2210-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289G-2210-1M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290G-2214-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291G-2214-1M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292G-2214-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293L-3191-1 Bolt Hole Flexibility Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303L-3191-2 Flange Dimensions and Forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304L-3230-1 Group 1 Flange Assembly (Identical Flange Pairs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306L-3230-2 Group 2 Flange Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307L-3230-3 Group 3 Flange Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307N-1211(a)-1 Horizontal Design Response Spectra Scaled to 1g Horizontal Ground Acceleration . . . . . . 316N-1211(b)-1 Vertical Design Response Spectra Scaled to 1g Horizontal Ground Acceleration . . . . . . . . 318N-1211(a)-1M Horizontal Design Response Spectra Scaled to 1g Horizontal Ground Acceleration . . . . . . 320N-1211(b)-1M Vertical Design Response Spectra Scaled to 1g Horizontal Ground Acceleration . . . . . . . . 321N-1226-1 Response Spectrum Peak Broadening and Peak Amplitude . . . . . . . . . . . . . . . . . . . . . . . . . . 331N-1226-2 Use of Floor Spectra When Several Equipment Frequencies Are Within the Widened

Spectral Peak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333N-1228.3-1 Coefficients for a Component of Shear for a Unit Displacement of a Nondatum Support . 337N-1321-1 Vortices Shed From a Circular Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346N-1321-2 Some Typical Cross Sections of Bluff Bodies That Can Experience Vortex Shedding . . . . . 346N-1323-1 Synchronization of the Vortex Shedding Frequency and the Tube Natural Frequency for a

Single, Flexibly‐Mounted Circular Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348N-1331-1 Response of a Tube Bank to Cross Flow (Ref. [115]) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 351N-1331-2 Tube Vibration Patterns at Fluid-Elastic Instability for a Four‐Tube Row (Ref. [118]) . . . 352N-1331-3 Tube Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353N-1331-4 Stability Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354N-1343-1 Random Excitation Coefficient for Arrays in Cross Flow (Ref. [100]) . . . . . . . . . . . . . . . . . 358N-1430-1 Vibration Forms for Circular Cylindrical Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361N-1451-1 Comparison of Fritz and Kiss Solution With Exact Solution . . . . . . . . . . . . . . . . . . . . . . . . . 364N-1470-1 Imaginary Part of Z as a Function of b/a for Selected Value of S (Ref. [146]) . . . . . . . . . . 367N-1722.2-1 Definition of Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369N-1723.1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371N-1723.1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 371N-1723.1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372N-1723.1-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372O-1120(e)-1 Application Point of Venting Force F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380O-1120(e)-2 Limiting Safety Valve Arrangements and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380Q-1130-1 Typical Hub and Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388Q-1130-2 Typical Clamp Lug Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389R-1200-1 Determination of Permissible Lowest Service Metal Temperature . . . . . . . . . . . . . . . . . . . . 393S-1600-1 Typical Centrifugal Pump Shaft Failure Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396S-2300-1 Steps in the Design of a Pump Shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398

xi

T-1213-1 Illustrations of Angular Dimensions — Pipe Legs, Valves, Supports, Bends . . . . . . . . . . . . 402T-1213-2 Illustrations of Linear Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403U-1500-1 Typical for Type A, C, E, F, and/or Some J (NB‐3400) Pumps . . . . . . . . . . . . . . . . . . . . . . . . 408U-1500-2 Typical for Type B and D Pumps (NC-3400 and ND‐3400) . . . . . . . . . . . . . . . . . . . . . . . . . . 409U-1500-3 Typical for Type G and H Pumps (NC-3400 and ND‐3400) . . . . . . . . . . . . . . . . . . . . . . . . . . 410U-1500-4 Typical for Type K Pumps (NC-3400 and ND‐3400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411U-1500-5 Typical for Type L Pumps (NC-3400 and ND‐3400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412U-1500-6 Reciprocating Plunger Pump (NC-3400 and ND‐3400) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413U-1500-7 Typical for Type A and C Pumps (NC-3400 and ND‐3400) . . . . . . . . . . . . . . . . . . . . . . . . . . 415W-2120-1 Environmental Conditions Required for SCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426Y-2300-1 Nomenclature Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472Y-3300-1 Nomenclature Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475Y-4200-1 Weld Type Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478Y-4300-1 Nomenclature Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478Y-5300-1 Nomenclature Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481BB-3300-1 Bellows Configuration and Wrap Angle, α . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492DD-1100-1 Polyethylene Material Organization Responsibilities per NCA-3970 . . . . . . . . . . . . . . . . . . 504EE-1120-1 Typical Engineering Tensile Stress–Strain Curve [1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506EE-1120-2 Comparison of Engineering and True Stress–Strain Curves (Ref. [1]) . . . . . . . . . . . . . . . . . 507EE-1230-1 Quasi-Static Tensile Test Results for 304/304L Base and Welded Material at 300°F

(149°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511EE-1230-2 Quasi-Static Tensile Test Results for 316/316L Base and Welded Material at 300°F

(149°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512EE-1230-3 Comparison of Base and Welded 304/304L Material to Identical Impact Tests at −20°F

(−29°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512EE-1230-4 Comparison of Base and Welded 316/316L Material to Identical Impact Tests at −20°F

(−29°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513HH-1120-1 Gate Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522HH-1120-2 Globe Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 524HH-1120-3 Swing Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 526HH-1120-4 Globe Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527HH-1120-5 Diaphragm Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 528HH-1120-6 Plug Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529HH-1120-7 Globe Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530HH-1120-8 Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531HH-1120-9 Control Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 532HH-1120-10 Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534HH-1120-11 Nozzle Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535

TABLES1 Section III Appendices Reference Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxixI-9.0 Tabulated Values of Sa , ksi, From Figures I-9.1 through I-9.4 . . . . . . . . . . . . . . . . . . . . . 2I-9.0M Tabulated Values of Sa , MPa, From Figures I-9.1M through I-9.4M . . . . . . . . . . . . . . . . . 3I-9.1 Tabulated Values of Sa , ksi (MPa), From Figures I-9.1 and I-9.1M . . . . . . . . . . . . . . . . . . 6I-9.2 Tabulated Values of Sa , ksi (MPa), From Figures I-9.2 and I-9.2M . . . . . . . . . . . . . . . . . . 9I-9.5 Tabulated Values of Sa , ksi (MPa), From Figures I-9.5 and I-9.5M . . . . . . . . . . . . . . . . . . 16I-9.6 Tabulated Values of Sa , ksi (MPa), for Grade 9 Titanium From Figures I-9.6 and I-9.6M 19I-9.7 Tabulated Values of Sa , ksi (MPa), From Figure I-9.7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21I-9.8 Tabulated Values of Sa , ksi, From Figure I-9.8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24I-9.8M Tabulated Values of Sa , MPa, From Figure I-9.8M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25II-2440-1 Stress Intensification Increase Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V-1000 Guide for Preparation of Data Report Forms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66VI-1132-1 Maximum Size of Nonrelevant Indications and Acceptable Rounded Indications — Ex-

amples Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72XI-3221.1-1 Gasket Materials and Contact Facings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88XI-3221.1-2 Effective Gasket Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

xii

XI-3230-1 Moment Arms for Flange Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91XI-3240-1 Flange Factors in Formula Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92XIII-1130-1 Classification of Stress Intensity in Vessels for Some Typical Cases . . . . . . . . . . . . . . . . . 105XIII-1153(a)-1 Values of m , n , and Tmax for Various Classes of Permitted Materials . . . . . . . . . . . . . . . 109XIII-2123-1 Nozzles in Spherical Shells and Formed Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112XIII-2123-2 Nozzles in Cylindrical Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112XVIII-1110-1 Superheat Correction Factor, Ksh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119XVIII-1110-1M Superheat Correction Factor, Ksh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121XVIII-1110(a)-1 Molecular Weights of Gases and Vapors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123XXII-1200-1 Values of Δ for Junctions at the Large Cylinder for α ≤ 60 deg . . . . . . . . . . . . . . . . . . . . 131S2-1 Design Specification — Divisions 1 Through 3 and 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140S2-2 Design Report — Divisions 1, 3, and 5 (Excluding Nonmetallic CSS) . . . . . . . . . . . . . . . . 141S2-3 Load Capacity Data Sheet — Divisions 1 and 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143S2-4 Fabrication Specification — Division 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143S2-5 Overpressure Protection Report — Divisions 1, 2, and 5 . . . . . . . . . . . . . . . . . . . . . . . . . 144S2-6 Construction Specification, Design Drawings, and Design Report — Divisions 2 and 5

(Nonmetallic CSS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145XXIV-1000 Standard Units for Use in Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150XXVI-2221-1 Certification Requirements for Polyethylene Compound . . . . . . . . . . . . . . . . . . . . . . . . . . 154XXVI-2511-1 Minimum Quality Testing Requirements for Polyethylene Compound Lots . . . . . . . . . . 160XXVI-2512-1 Minimum Quality Testing Requirements for Natural Compound Lots . . . . . . . . . . . . . . . 160XXVI-2513-1 Testing Requirements for Pigment Concentrate Compound Lots . . . . . . . . . . . . . . . . . . . 161XXVI-2520(a)-1 Minimum Quality Testing Requirements for Polyethylene Source Material . . . . . . . . . . 161XXVI-2520(a)-2 Minimum Quality Testing Requirements for Polyethylene Material — Pipe . . . . . . . . . . 162XXVI-3131-1(a) Long-Term Allowable Stress, S , for Polyethylene, psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169XXVI-3131-1M(a) Long-Term Allowable Stress, S , for Polyethylene, MPa . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169XXVI-3131-1(b) Elevated Temperature Allowable Stress, S , for Polyethylene, psi (MPa) . . . . . . . . . . . . . 170XXVI-3132-1 Geometric Shape Ratings (GSR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170XXVI-3133-1 SA , Allowable Secondary Stress Limit, psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171XXVI-3133-1M SA , Allowable Secondary Stress Limit, MPa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171XXVI-3210-1 Maximum Allowable Ring Deflection, Ωmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171XXVI-3210-2 Soil Support Factor, FS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172XXVI-3210-3 Modulus of Elasticity of Polyethylene Pipe, Ep ipe , psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172XXVI-3210-3M Modulus of Elasticity of Polyethylene Pipe, Ep ipe , MPa . . . . . . . . . . . . . . . . . . . . . . . . . . . 172XXVI-3220-1 Allowable Sidewall Compression Stress, Scomp (psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173XXVI-3220-1M Allowable Sidewall Compression Stress, Scomp (MPa) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173XXVI-3221.2-1 Ovality Correction Factor, fO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173XXVI-3223-1 Design and Service Level Longitudinal Stress Factor, K ′ . . . . . . . . . . . . . . . . . . . . . . . . . . 173XXVI-3223-2 Short Duration (5 min) Allowable Longitudinal Tensile Stress . . . . . . . . . . . . . . . . . . . . . 173XXVI-3311-1 Stress Indices, Flexibility, and Stress Intensification Factors for PE Piping Components 174XXVI-I-100-1 PE Standards and Specifications Referenced in Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195XXVI-II-421 Requirements of an Ultrasonic Examination Procedure for HDPE Techniques . . . . . . . . 196XXVI-A-110-1 Fusion Standards and Specifications Referenced in Text . . . . . . . . . . . . . . . . . . . . . . . . . . 200XXVI-C-100-1 Seismic Strain Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204A-5240-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220A-9210(d)-1 Interaction Equations for Common Beam Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244A-9521(b)-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245D-1210-1 Suggested Minimum Preheat Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273E-1210-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276E-1210-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276F-1200-1 Level D Service Limits — Components and Supports Elastic System Analysis Acceptance

Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278L-3212-1 Trial Flange Thickness and Area of Bolting for Various Groups of Assemblies and Flange

Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305L-3240-1 Summary of Applicable Equations for Different Groups of Assemblies and Different Ca-

tegories of Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308

xiii

N-1211(a)-1 Horizontal Design Response Spectra Relative Values of Spectrum Amplification Factorsfor Control Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317

N-1211(b)-1 Vertical Design Response Spectra Relative Values of Spectrum Amplification Factors forControl Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319

N-1225.1.1(b)-1 Minimum Support Load Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328N-1226-1 Suggested Frequencies, Hz, for Calculation of Ground and Floor Response Spectra . . . 330N-1230-1 Damping Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 338N-1311-1 Added Mass for Lateral Acceleration of Structures in a Fluid Reservoir . . . . . . . . . . . . . 344N-1311-2 Guidelines for Damping of Flow‐Induced Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345N-1324.2(a)-1 Semiempirical Correlations for Predicting Resonant Vortex‐Induced Vibration Ampli-

tude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349Q-1180-1 Allowable Design Stress for Clamp Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391T-1222-1 Branch/Run Size Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404U-1600-1 Summary of Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407U-1610-1 Materials for Pump Internal Items for Class 1, 2, and 3 Pumps . . . . . . . . . . . . . . . . . . . . 416CC-3120-1 Correlation of Service Loadings and Stress Limit Coefficients . . . . . . . . . . . . . . . . . . . . . . 499EE-1150-1 Examples of Triaxiality Factor Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508EE-1250-1 Factors for Specified Strain Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513FF-1122-1 Permitted Material Specifications and Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 516GG-1100-1 Minimum Thickness for Pipe Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519HH-1120-1 Summary of Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521HH-1312-1 Allowable Stress Values, S , for Material for Internal and External Items (U.S. Customary

Units) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536HH-1312-1M Allowable Stress Values, S , for Material for Internal and External Items (SI Units) . . . . 539

FORMSN-1 Certificate Holder’s Data Report for Nuclear Vessels* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41N-1A Certificate Holder’s Data Report for Nuclear Vessels* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43N-2 Certificate Holder’s Data Report for Identical Nuclear Parts and Appurtenances . . . . . . . . . . . . . 44N-3 Owner’s Data Report for Nuclear Power Plant Components* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46N-5 Certificate Holder's Data Report for Installation or Shop Assembly or Nuclear Power Plant

Components, Supports, and Appurtenances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48N-6 Certificate Holders’ Data Report for Storage Tanks* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50NPP-1 Certificate Holder's Data Report for Fabricated Nuclear Piping Subassemblies . . . . . . . . . . . . . . 52NPV-1 Certificate Holder’s Data Report for Nuclear Pumps or Valves* . . . . . . . . . . . . . . . . . . . . . . . . . . . 54NV-1 Certificate Holder’s Data Report for Pressure or Vacuum Relief Valves* . . . . . . . . . . . . . . . . . . . . 56NCS-1 Certificate Holder’s Data Report for Core Support Structures* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58NF-1 Certificate Holder’s Data Report for Supports* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59NM-1 Certificate Holder’s Data Report for Tubular Products and Fittings Welded With Filler Metal* . 61NS-1 Certificate Holder’s Certificate of Conformance for Welded Supports* . . . . . . . . . . . . . . . . . . . . . 62C-1 Certificate Holder’s Data Report for Concrete Reactor Vessels and Containments* . . . . . . . . . . . 64S3-1 Design Specification (Div. 1, 2, and 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146S3-2 Design Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147S3-3 Overpressure Protection Report (Div. 1, 2, and 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148S3-4 Design Specification (Div. 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148S3-5 Fabrication Specification (Div. 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149NM(PE)-2 Data Report For Nonmetallic Batch-produced Products Requiring Fusing . . . . . . . . . . . . . . . . . . 199

ENDNOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545

xiv

ð15ÞLIST OF SECTIONSSECTIONSI Rules for Construction of Power Boilers

II Materials• Part A — Ferrous Material Specifications• Part B — Nonferrous Material Specifications• Part C — Specifications for Welding Rods, Electrodes, and Filler Metals• Part D — Properties (Customary)• Part D — Properties (Metric)

III Rules for Construction of Nuclear Facility Components• Subsection NCA — General Requirements for Division 1 and Division 2• Appendices• Division 1– Subsection NB — Class 1 Components– Subsection NC — Class 2 Components– Subsection ND — Class 3 Components– Subsection NE — Class MC Components– Subsection NF — Supports– Subsection NG — Core Support Structures– Subsection NH — Class 1 Components in Elevated Temperature Service*

• Division 2 — Code for Concrete Containments• Division 3 — Containments for Transportation and Storage of Spent Nuclear Fuel and High Level RadioactiveMaterial and Waste

• Division 5 — High Temperature Reactors

IV Rules for Construction of Heating Boilers

V Nondestructive Examination

VI Recommended Rules for the Care and Operation of Heating Boilers

VII Recommended Guidelines for the Care of Power Boilers

VIII Rules for Construction of Pressure Vessels• Division 1• Division 2 — Alternative Rules• Division 3 — Alternative Rules for Construction of High Pressure Vessels

IX Welding, Brazing, and Fusing Qualifications

X Fiber-Reinforced Plastic Pressure Vessels

XI Rules for Inservice Inspection of Nuclear Power Plant Components

XII Rules for Construction and Continued Service of Transport Tanks

* The 2015 Edition of Section III is the last edition in which Section III, Division 1, Subsection NH, Class 1 Components in Elevated TemperatureService, will be published. The requirements located within Subsection NH have been moved to Section III, Division 5, Subsection HB, Subpart Bfor the elevated temperature construction of Class A components.

xv

INTERPRETATIONS

Interpretations of the Code have historically been posted in January and July at http://cstools.asme.org/interpreta-tions.cfm. Interpretations issued during the previous two calendar years are included with the publication of the applic-able Section of the Code in the 2015 Edition. Interpretations of Section III, Divisions 1 and 2 and Section III Appendicesare included with Subsection NCA.Following the 2015 Edition, interpretations will not be included in editions; they will be issued in real time in ASME's

Interpretations Database at http://go.asme.org/Interpretations. Historical BPVC interpretations may also be found inthe Database.

CODE CASES

The Boiler and Pressure Vessel Code committees meet regularly to consider proposed additions and revisions to theCode and to formulate Cases to clarify the intent of existing requirements or provide, when the need is urgent, rules formaterials or constructions not covered by existing Code rules. Those Cases that have been adopted will appear in theappropriate 2015 Code Cases book: “Boilers and Pressure Vessels” or “Nuclear Components.” Supplements will be sentor made available automatically to the purchasers of the Code Cases books up to the publication of the 2017 Code.

xvi

ð15ÞFOREWORD*

In 1911, The American Society of Mechanical Engineers established the Boiler and Pressure Vessel Committee to for-mulate standard rules for the construction of steam boilers and other pressure vessels. In 2009, the Boiler and PressureVessel Committee was superseded by the following committees:

(a) Committee on Power Boilers (I)(b) Committee on Materials (II)(c) Committee on Construction of Nuclear Facility Components (III)(d) Committee on Heating Boilers (IV)(e) Committee on Nondestructive Examination (V)(f) Committee on Pressure Vessels (VIII)(g) Committee on Welding, Brazing, and Fusing (IX)(h) Committee on Fiber-Reinforced Plastic Pressure Vessels (X)(i) Committee on Nuclear Inservice Inspection (XI)(j) Committee on Transport Tanks (XII)(k) Technical Oversight Management Committee (TOMC)Where reference is made to “the Committee” in this Foreword, each of these committees is included individually and

collectively.The Committee’s function is to establish rules of safety relating only to pressure integrity, which govern the

construction** of boilers, pressure vessels, transport tanks, and nuclear components, and the inservice inspection of nu-clear components and transport tanks. The Committee also interprets these rules when questions arise regarding theirintent. The technical consistency of the Sections of the Code and coordination of standards development activities of theCommittees is supported and guided by the Technical Oversight Management Committee. This Code does not addressother safety issues relating to the construction of boilers, pressure vessels, transport tanks, or nuclear components, orthe inservice inspection of nuclear components or transport tanks. Users of the Code should refer to the pertinent codes,standards, laws, regulations, or other relevant documents for safety issues other than those relating to pressure integ-rity. Except for Sections XI and XII, and with a few other exceptions, the rules do not, of practical necessity, reflect thelikelihood and consequences of deterioration in service related to specific service fluids or external operating environ-ments. In formulating the rules, the Committee considers the needs of users, manufacturers, and inspectors of pressurevessels. The objective of the rules is to afford reasonably certain protection of life and property, and to provide a marginfor deterioration in service to give a reasonably long, safe period of usefulness. Advancements in design and materialsand evidence of experience have been recognized.

This Code contains mandatory requirements, specific prohibitions, and nonmandatory guidance for construction ac-tivities and inservice inspection and testing activities. The Code does not address all aspects of these activities and thoseaspects that are not specifically addressed should not be considered prohibited. The Code is not a handbook and cannotreplace education, experience, and the use of engineering judgment. The phrase engineering judgement refers to tech-nical judgments made by knowledgeable engineers experienced in the application of the Code. Engineering judgmentsmust be consistent with Code philosophy, and such judgments must never be used to overrule mandatory requirementsor specific prohibitions of the Code.

The Committee recognizes that tools and techniques used for design and analysis change as technology progressesand expects engineers to use good judgment in the application of these tools. The designer is responsible for complyingwith Code rules and demonstrating compliance with Code equations when such equations are mandatory. The Codeneither requires nor prohibits the use of computers for the design or analysis of components constructed to the

* The information contained in this Foreword is not part of this American National Standard (ANS) and has not been processed in accordancewith ANSI's requirements for an ANS. Therefore, this Foreword may contain material that has not been subjected to public review or a con-sensus process. In addition, it does not contain requirements necessary for conformance to the Code.

** Construction, as used in this Foreword, is an all-inclusive term comprising materials, design, fabrication, examination, inspection, testing,certification, and pressure relief.

xvii

requirements of the Code. However, designers and engineers using computer programs for design or analysis are cau-tioned that they are responsible for all technical assumptions inherent in the programs they use and the application ofthese programs to their design.The rules established by the Committee are not to be interpreted as approving, recommending, or endorsing any pro-

prietary or specific design, or as limiting in any way the manufacturer's freedom to choose any method of design or anyform of construction that conforms to the Code rules.The Committee meets regularly to consider revisions of the rules, new rules as dictated by technological development,

Code Cases, and requests for interpretations. Only the Committee has the authority to provide official interpretations ofthis Code. Requests for revisions, new rules, Code Cases, or interpretations shall be addressed to the Secretary in writingand shall give full particulars in order to receive consideration and action (see Submittal of Technical Inquiries to theBoiler and Pressure Vessel Standards Committees). Proposed revisions to the Code resulting from inquiries will be pre-sented to the Committee for appropriate action. The action of the Committee becomes effective only after confirmationby ballot of the Committee and approval by ASME. Proposed revisions to the Code approved by the Committee are sub-mitted to the American National Standards Institute (ANSI) and published at http://go.asme.org/BPVCPublicReview toinvite comments from all interested persons. After public review and final approval by ASME, revisions are published atregular intervals in Editions of the Code.The Committee does not rule on whether a component shall or shall not be constructed to the provisions of the Code.

The scope of each Section has been established to identify the components and parameters considered by the Committeein formulating the Code rules.Questions or issues regarding compliance of a specific component with the Code rules are to be directed to the ASME

Certificate Holder (Manufacturer). Inquiries concerning the interpretation of the Code are to be directed to the Commit-tee. ASME is to be notified should questions arise concerning improper use of an ASME Certification Mark.When required by context in this Section, the singular shall be interpreted as the plural, and vice versa, and the fem-

inine, masculine, or neuter gender shall be treated as such other gender as appropriate.

xviii

STATEMENT OF POLICY ON THE USE OF THE CERTIFICATIONMARK AND CODE AUTHORIZATION IN ADVERTISING

ASME has established procedures to authorize qualified organizations to perform various activities in accordancewith the requirements of the ASME Boiler and Pressure Vessel Code. It is the aim of the Society to provide recognitionof organizations so authorized. An organization holding authorization to perform various activities in accordance withthe requirements of the Code may state this capability in its advertising literature.

Organizations that are authorized to use the Certification Mark for marking items or constructions that have beenconstructed and inspected in compliance with the ASME Boiler and Pressure Vessel Code are issued Certificates ofAuthorization. It is the aim of the Society to maintain the standing of the Certification Mark for the benefit of the users,the enforcement jurisdictions, and the holders of the Certification Mark who comply with all requirements.

Based on these objectives, the following policy has been established on the usage in advertising of facsimiles of theCertification Mark, Certificates of Authorization, and reference to Code construction. The American Society of MechanicalEngineers does not “approve,” “certify,” “rate,” or “endorse” any item, construction, or activity and there shall be no state-ments or implications that might so indicate. An organization holding the Certification Mark and/or a Certificate ofAuthorization may state in advertising literature that items, constructions, or activities “are built (produced or per-formed) or activities conducted in accordance with the requirements of the ASME Boiler and Pressure Vessel Code,”or “meet the requirements of the ASME Boiler and Pressure Vessel Code.”An ASME corporate logo shall not be usedby any organization other than ASME.

The Certification Mark shall be used only for stamping and nameplates as specifically provided in the Code. However,facsimiles may be used for the purpose of fostering the use of such construction. Such usage may be by an association ora society, or by a holder of the Certification Mark who may also use the facsimile in advertising to show that clearly spe-cified items will carry the Certification Mark. General usage is permitted only when all of a manufacturer’s items areconstructed under the rules.

STATEMENT OF POLICY ON THE USE OF ASME MARKING TOIDENTIFY MANUFACTURED ITEMS

The ASME Boiler and Pressure Vessel Code provides rules for the construction of boilers, pressure vessels, and nuclearcomponents. This includes requirements for materials, design, fabrication, examination, inspection, and stamping. Itemsconstructed in accordance with all of the applicable rules of the Code are identified with the official Certification Markdescribed in the governing Section of the Code.

Markings such as “ASME,” “ASME Standard,” or any other marking including “ASME” or the Certification Mark shall notbe used on any item that is not constructed in accordance with all of the applicable requirements of the Code.

Items shall not be described on ASME Data Report Forms nor on similar forms referring to ASME that tend to implythat all Code requirements have been met when, in fact, they have not been. Data Report Forms covering items not fullycomplying with ASME requirements should not refer to ASME or they should clearly identify all exceptions to the ASMErequirements.

xix

ð15Þ SUBMITTAL OF TECHNICAL INQUIRIES TO THE BOILER ANDPRESSURE VESSEL STANDARDS COMMITTEES

1 INTRODUCTION

(a) The following information provides guidance to Code users for submitting technical inquiries to the committees.See Guideline on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code in Section II, Parts Cand D for additional requirements for requests involving adding new materials to the Code. Technical inquiries includerequests for revisions or additions to the Code rules, requests for Code Cases, and requests for Code Interpretations, asdescribed below.

(1) Code Revisions. Code revisions are considered to accommodate technological developments, address administra-tive requirements, incorporate Code Cases, or to clarify Code intent.

(2) Code Cases. Code Cases represent alternatives or additions to existing Code rules. Code Cases are written as aquestion and reply, and are usually intended to be incorporated into the Code at a later date. When used, Code Casesprescribe mandatory requirements in the same sense as the text of the Code. However, users are cautioned that notall jurisdictions or owners automatically accept Code Cases. The most common applications for Code Cases are:

(-a) to permit early implementation of an approved Code revision based on an urgent need

(-b) to permit the use of a new material for Code construction

(-c) to gain experience with new materials or alternative rules prior to incorporation directly into the Code

(3) Code Interpretations. Code Interpretations provide clarification of the meaning of existing rules in the Code, andare also presented in question and reply format. Interpretations do not introduce new requirements. In cases whereexisting Code text does not fully convey the meaning that was intended, and revision of the rules is required to supportan interpretation, an Intent Interpretation will be issued and the Code will be revised.

(b) The Code rules, Code Cases, and Code Interpretations established by the committees are not to be considered asapproving, recommending, certifying, or endorsing any proprietary or specific design, or as limiting in any way the free-dom of manufacturers, constructors, or owners to choose any method of design or any form of construction that con-forms to the Code rules.

(c) Inquiries that do not comply with these provisions or that do not provide sufficient information for a committee’sfull understanding may result in the request being returned to the inquirer with no action.

2 INQUIRY FORMAT

Submittals to a committee shall include:

(a) Purpose. Specify one of the following:

(1) revision of present Code rules

(2) new or additional Code rules

(3) Code Case

(4) Code Interpretation

(b) Background. Provide the information needed for the committee’s understanding of the inquiry, being sure to in-clude reference to the applicable Code Section, Division, edition, addenda (if applicable), paragraphs, figures, and tables.Preferably, provide a copy of the specific referenced portions of the Code.

(c) Presentations. The inquirer may desire or be asked to attend a meeting of the committee to make a formal presen-tation or to answer questions from the committee members with regard to the inquiry. Attendance at a committee meet-ing shall be at the expense of the inquirer. The inquirer’s attendance or lack of attendance at a meeting shall not be abasis for acceptance or rejection of the inquiry by the committee.

xx

3 CODE REVISIONS OR ADDITIONS

Requests for Code revisions or additions shall provide the following:(a) Proposed Revisions or Additions. For revisions, identify the rules of the Code that require revision and submit a copy

of the appropriate rules as they appear in the Code, marked up with the proposed revision. For additions, provide therecommended wording referenced to the existing Code rules.

(b) Statement of Need. Provide a brief explanation of the need for the revision or addition.(c) Background Information. Provide background information to support the revision or addition, including any data

or changes in technology that form the basis for the request that will allow the committee to adequately evaluate theproposed revision or addition. Sketches, tables, figures, and graphs should be submitted as appropriate. When applic-able, identify any pertinent paragraph in the Code that would be affected by the revision or addition and identify para-graphs in the Code that reference the paragraphs that are to be revised or added.

4 CODE CASES

Requests for Code Cases shall provide a Statement of Need and Background Information similar to that defined in 3(b)and 3(c), respectively, for Code revisions or additions. The urgency of the Code Case (e.g., project underway or imminent,new procedure, etc.) must be defined and it must be confirmed that the request is in connection with equipment that willbear the Certification Mark, with the exception of Section XI applications. The proposed Code Case should identify theCode Section and Division, and be written as a Question and a Reply in the same format as existing Code Cases. Requestsfor Code Cases should also indicate the applicable Code editions and addenda (if applicable) to which the proposed CodeCase applies.

5 CODE INTERPRETATIONS

(a) Requests for Code Interpretations shall provide the following:(1) Inquiry. Provide a condensed and precise question, omitting superfluous background information and, when

possible, composed in such a way that a “yes” or a “no” Reply, with brief provisos if needed, is acceptable. The questionshould be technically and editorially correct.

(2) Reply. Provide a proposed Reply that will clearly and concisely answer the Inquiry question. Preferably, the Replyshould be “yes” or “no,” with brief provisos if needed.

(3) Background Information. Provide any background information that will assist the committee in understandingthe proposed Inquiry and Reply.

(b) Requests for Code Interpretations must be limited to an interpretation of a particular requirement in the Code or aCode Case. The committee cannot consider consulting type requests such as the following:

(1) a review of calculations, design drawings, welding qualifications, or descriptions of equipment or parts to de-termine compliance with Code requirements;

(2) a request for assistance in performing any Code-prescribed functions relating to, but not limited to, materialselection, designs, calculations, fabrication, inspection, pressure testing, or installation;

(3) a request seeking the rationale for Code requirements.

6 SUBMITTALS

Submittals to and responses from the committees shall meet the following:(a) Submittal. Inquiries from Code users shall be in English and preferably be submitted in typewritten form; however,

legible handwritten inquiries will also be considered. They shall include the name, address, telephone number, fax num-ber, and e-mail address, if available, of the inquirer and be mailed to the following address:

SecretaryASME Boiler and Pressure Vessel CommitteeTwo Park AvenueNew York, NY 10016-5990As an alternative, inquiries may be submitted via e-mail to: [email protected] or via our online tool at http://

go.asme.org/InterpretationRequest.(b) Response. The Secretary of the appropriate committee shall acknowledge receipt of each properly prepared in-

quiry and shall provide a written response to the inquirer upon completion of the requested action by the committee.

xxi

ð15Þ PERSONNELASME Boiler and Pressure Vessel Standards Committees,

Subgroups, and Working GroupsJanuary 1, 2015

TECHNICAL OVERSIGHT MANAGEMENT COMMITTEE (TOMC)

T. P. Pastor, ChairR. W. Barnes, Vice ChairJ. S. Brzuszkiewicz, Staff SecretaryR. J. BasileJ. E. BateyT. L. BedeauxD. L. BergerD. A. CanonicoA. ChaudouetD. B. DeMichaelR. P. DeublerP. D. EdwardsJ. G. FeldsteinR. E. GimpleM. GoldT. E. HansenG. W. Hembree

J. F. HenryR. S. Hill IIIG. G. KarcherW. M. LundyJ. R. MacKayW. E. NorrisG. C. ParkM. D. RanaR. F. Reedy, Sr.B. W. RobertsS. C. RobertsF. J. Schaaf, Jr.A. SelzB. F. ShelleyW. J. SperkoR. W. SwayneC. Withers

HONORARY MEMBERS (MAIN COMMITTEE)

F. P. BartonR. J. CepluchT. M. CullenW. D. DotyG. E. FeigelO. F. HeddenM. H. Jawad

A. J. JustinW. G. KnechtJ. LeCoffT. G. McCartyG. C. MillmanR. A. MoenR. F. Reedy, Sr.

ADMINISTRATIVE COMMITTEE

T. P. Pastor, ChairR. W. Barnes, Vice ChairJ. S. Brzuszkiewicz, Staff SecretaryR. J. BasileJ. E. BateyT. L. BedeauxD. L. Berger

J. F. Henry

R. S. Hill III

G. C. Park

M. D. Rana

B. F. Shelley

W. J. Sperko

MARINE CONFERENCE GROUP

J. G. Hungerbuhler, Jr.G. Nair

N. ProkopukJ. D. Reynolds

CONFERENCE COMMITTEE

D. A. Douin — Ohio, SecretaryM. J. Adams — Ontario, CanadaJ. T. Amato — MinnesotaB. P. Anthony — Rhode IslandR. D. Austin — ArizonaR. J. Brockman — MissouriM. A. Burns — FloridaJ. H. Burpee — MaineC. B. Cantrell — NebraskaD. C. Cook — CaliforniaB. J. Crawford — GeorgiaE. L. Creaser — New Brunswick,Canada

J. J. Dacanay — HawaiiC. Dautrich — North DakotaP. L. Dodge— Nova Scotia, CanadaD. Eastman — Newfoundland andLabrador, Canada

J. J. Esch — DelawareC. Fulton — AlaskaR. J. Handy — KentuckyD. R. Hannon — ArkansasE. S. Kawa — MassachusettsJ. C. Klug — WisconsinM. Kotb — Quebec, CanadaT. C. Hellman — OklahomaE. G. Hilton — VirginiaD. T. Jagger — OhioK. J. Kraft — MarylandL. C. Leet — WashingtonA. M. Lorimor — South DakotaM. Mailman — NorthwestTerritories, Canada

D. E. Mallory — New HampshireW. McGivney — New YorkU. Merkle — IowaM. S. Moore — MichiganS. V. Nelson — ColoradoC. C. Novak — IllinoisT. Oda — WashingtonR. P. Pate — AlabamaM. K. Perdue — OregonM. Poehlmann — Alberta, CanadaJ. F. Porcella — West VirginiaA. Pratt — ConnecticutC. F. Reyes — CaliforniaM. J. Ryan — IllinoisM. H. Sansone — New YorkT. S. Scholl — British Columbia,Canada

G. L. Schultz — NevadaT. S. Seine — North DakotaC. S. Selinger — Saskatchewan,Canada

D. Slater — Manitoba, CanadaN. Smith — PennsylvaniaR. Spiker — North CarolinaR. K. Sturm — UtahS. R. Townsend — Prince EdwardIsland, Canada

R. D. Troutt — TexasM. J. Verhagen — WisconsinM. Washington — New JerseyK. L. Watson — MississippiC. J. Wilson III — Kansas

INTERNATIONAL INTEREST REVIEW GROUP

V. FelixY.-G. KimS. H. LeongW. LinO. F. Manafa

C. MinuT. S. G. NarayannenY.-W. ParkR. ReynagaP. Williamson

xxii

COMMITTEE ON POWER BOILERS (BPV I)

D. L. Berger, ChairR. E. McLaughlin, Vice ChairU. D'Urso, Staff SecretaryJ. L. ArnoldS. W. CameronD. A. CanonicoK. K. ColemanP. D. EdwardsP. FalloueyJ. G. FeldsteinG. W. GalanesT. E. HansenJ. F. HenryJ. S. HunterW. L. LowryF. Massi

L. MoedingerP. A. MolvieY. OishiE. M. OrtmanJ. T. PillowB. W. RobertsJ. M. TanzoshD. TompkinsD. E. TuttleJ. VattappillyR. V. WielgoszinskiY. Li, DelegateH. Michael, DelegateD. N. French, Honorary MemberT. C. McGough, Honorary MemberR. L. Williams, Honorary Member

Subgroup on Design (BPV I)

J. Vattappilly, ChairD. I. Anderson, SecretaryD. DeweesP. DhorajiaH. A. Fonzi, Jr.J. P. GlaspieG. B. Komora

P. A. Molvie

D. A. Olson

S. V. Torkildson

M. Wadkinson

C. F. Jeerings, Contributing Member

J. C. Light, Contributing Member

Subgroup on Fabrication and Examination (BPV I)

J. T. Pillow, ChairJ. L. Arnold, SecretaryP. BeckerD. L. BergerS. W. CameronS. FincherG. W. GalanesP. F. Gilston

J. Hainsworth

T. E. Hansen

C. T. McDaris

R. E. McLaughlin

R. J. Newell

Y. Oishi

R. V. Wielgoszinski

Subgroup on General Requirements and Piping (BPV I)

T. E. Hansen, ChairE. M. Ortman, Vice ChairF. Massi, SecretaryP. BeckerD. L. BergerP. D. EdwardsG. W. GalanesW. L. LowryR. E. McLaughlin

B. MollitorJ. T. PillowD. TompkinsS. V. TorkildsonD. E. TuttleM. WadkinsonR. V. WielgoszinskiC. F. Jeerings, Contributing MemberR. Uebel, Contributing Member

Subgroup on Heat Recovery Steam Generators (BPV I)

S. V. Torkildson, ChairJ. L. ArnoldJ. P. BellB. G. CarsonJ. GertzT. E. Hansen

G. B. KomoraC. T. McDarisY. OishiE. M. OrtmanD. TompkinsB. C. Turczynski

Subgroup on Locomotive Boilers (BPV I)

L. Moedinger, ChairS. M. Butler, SecretaryP. BoschanJ. BraunR. C. Franzen, Jr.D. W. GrinerS. D. JacksonM. A. Janssen

S. A. Lee

G. M. Ray

J. E. Rimmasch

R. B. Stone

M. W. Westland

R. Yuill

R. D. Reetz, Contributing Member

Subgroup on Materials (BPV I)

G. W. Galanes, ChairK. K. Coleman, Vice ChairJ. S. Hunter, SecretaryS. H. BowesD. A. CanonicoP. FalloueyK. L. HayesJ. F. Henry

M. Lewis

O. X. Li

F. Masuyama

D. W. Rahoi

B. W. Roberts

J. M. Tanzosh

J. Vattappilly

Subgroup on Solar Boilers (BPV I)

J. S. Hunter, ChairS. V. Torkildson, SecretaryG. W. GalanesR. E. HearneP. Jennings

D. J. KozaF. MassiE. M. OrtmanM. J. SlaterJ. C. Light, Contributing Member

India International Working Group (BPV I)

H. DalalI. KalyanasundaramS. MathurA. J. PatilA. R. PatilG. V. S. Rao

U. Revisanakaran

N. Satheesan

G. U. Shanker

D. Shrivastava

S. Venkataramana

Task Group on Modernization of BPVC Section I

D. I. Anderson, ChairU. D’Urso, Staff SecretaryJ. L. ArnoldS. W. CameronD. DeweesG. W. GalanesJ. P. GlaspieT. E. Hansen

J. F. HenryR. E. McLaughlinP. A. MolvieE. M. OrtmanJ. T. PillowB. W. RobertsD. E. TuttleJ. Vattappilly

xxiii

COMMITTEE ON MATERIALS (BPV II)

J. F. Henry, ChairD. W. Rahoi, Vice ChairN. Lobo, Staff SecretaryF. AbeA. AppletonJ. CameronD. A. CanonicoA. ChaudouetP. FalloueyJ. R. FouldsD. W. GandyM. H. GilkeyM. GoldJ. F. GrubbJ. A. HallK. M. HottleM. KatcherO. X. LiF. MasuyamaR. K. NanstadB. W. Roberts

E. ShapiroM. J. SlaterR. C. SutherlinR. W. SwindemanJ. M. TanzoshD. TylerO. Oldani, DelegateH. D. Bushfield, ContributingMember

M. L. Nayyar, Contributing MemberE. G. Nisbett, Contributing MemberE. Upitis, Contributing MemberT. M. Cullen, Honorary MemberW. D. Doty, Honorary MemberW. D. Edsall, Honorary MemberG. C. Hsu, Honorary MemberR. A. Moen, Honorary MemberC. E. Spaeder, Jr., HonoraryMember

A. W. Zeuthen, Honorary Member

Executive Committee (BPV II)

J. F. Henry, ChairD. W. Rahoi, Vice ChairN. Lobo, Staff SecretaryA. AppletonA. ChaudouetJ. R. FouldsM. Gold

J. F. Grubb

R. W. Mikitka

B. W. Roberts

R. C. Sutherlin

R. W. Swindeman

J. M. Tanosh

Subgroup on External Pressure (BPV II)

R. W. Mikitka, ChairD. L. Kurle, Vice ChairJ. A. A. Morrow, SecretaryL. F. CampbellH. ChenD. S. GriffinJ. F. Grubb

J. R. Harris IIIM. H. JawadC. R. ThomasM. WadkinsonM. Katcher, Contributing MemberC. H. Sturgeon, ContributingMember

Subgroup on Ferrous Specifications (BPV II)

A. Appleton, ChairK. M. Hottle, Vice ChairP. Wittenbach, SecretaryH. ChenB. M. DingmanM. J. DosdourianP. FalloueyJ. D. FritzT. GrahamJ. M. GrockiJ. F. GrubbC. Hyde

D. S. Janikowski

L. J. Lavezzi

S. G. Lee

W. C. Mack

A. S. Melilli

K. E. Orie

J. Shick

E. Upitis

J. D. Wilson

R. Zawierucha

E. G. Nisbett, Contributing Member

Subgroup on International Material Specifications (BPV II)

A. Chaudouet, ChairO. X. Li, Vice ChairT. F. Miskell, SecretaryS. W. CameronD. A. CanonicoH. ChenP. FalloueyA. F. GarbolevskyD. O. Henry

M. Ishikawa

W. M. Lundy

A. R. Nywening

E. Upitis

F. Zeller

D. Kwon, Delegate

O. Oldani, Delegate

H. Lorenz, Contributing Member

Subgroup on Nonferrous Alloys (BPV II)

R. C. Sutherlin, ChairM. H. Gilkey, Vice ChairH. AnadaJ. CallandD. B. DenisJ. F. GrubbA. HeinoM. KatcherJ. A. McMasterL. Paul

D. W. RahoiW. RenE. ShapiroM. H. SkillingbergD. TylerJ. WeritzR. WrightR. ZawieruchaW. R. Apblett, Jr., ContributingMember

Subgroup on Physical Properties (BPV II)

J. F. Grubb, ChairH. D. BushfieldD. B. Denis

P. FalloueyE. Shapiro

Subgroup on Strength, Ferrous Alloys (BPV II)

J. M. Tanzosh, ChairM. J. Slater, SecretaryF. AbeH. AnadaD. A. CanonicoA. Di RienzoP. FalloueyJ. R. FouldsM. GoldJ. A. HallJ. F. HenryK. Kimura

S. W. KnowlesF. MasuyamaC. PearceD. W. RahoiB. W. RobertsM. S. SheltonJ. P. ShingledeckerR. W. SwindemanW. R. Apblett, Jr., ContributingMember

H. Murakami, ContributingMember

Subgroup on Strength of Weldments (BPV II & BPV IX)

W. F. Newell, Jr., ChairS. H. BowesK. K. ColemanP. D. FlennerJ. R. FouldsD. W. GandyM. GoldK. L. Hayes

J. F. HenryJ. PensoD. W. RahoiB. W. RobertsJ. P. ShingledeckerW. J. SperkoJ. P. Swezy, Jr.J. M. Tanzosh

Working Group on Materials Database (BPV II)

R. W. Swindeman, ChairN. Lobo, Staff SecretaryF. AbeJ. R. FouldsJ. F. HenryM. KatcherB. W. Roberts

R. C. SutherlinD. Andrei, Contributing MemberJ. L. Arnold, Contributing MemberW. Hoffelner, Contributing MemberT. Lazar, Contributing MemberD. T. Peters, Contributing MemberW. Ren, Contributing Member

xxiv

Working Group on Creep Strength Enhanced Ferritic Steels (BPV II)

J. F. Henry, ChairF. AbeS. H. BowesD. A. CanonicoK. K. ColemanG. CuminoP. D. FlennerJ. R. FouldsD. W. Gandy

M. Gold

F. Masuyama

W. F. Newell, Jr.

B. W. Roberts

W. J. Sperko

R. W. Swindeman

J. M. Tanzosh

R. G. Young

Working Group on Data Analysis (BPV II)

J. R. Foulds, ChairF. AbeM. GoldJ. F. GrubbJ. F. HenryM. Katcher

F. MasuyamaW. RenB. W. RobertsM. SubanovicM. J. SwindemanR. W. Swindeman

China International Working Group (BPV II)

B. Shou, ChairYong Zhang, Vice ChairX. Tong, SecretaryW. FangQ. C. FengS. HuoH. LiJ. LiS. LiZ. RongcanS. TanC. Wang

X. Wang

F. Yang

G. Yang

R. Ye

L. Yin

H. Zhang

X.-H. Zhang

Yingkai Zhang

Q. Zhao

S. Zhao

J. Zou

COMMITTEE ON CONSTRUCTION OF NUCLEAR FACILITYCOMPONENTS (BPV III)

R. S. Hill III, ChairR. B. Keating, Vice ChairJ. C. Minichiello, Vice ChairA. Byk, Staff SecretaryT. M. AdamsA. AppletonR. W. BarnesW. H. BorterC. W. BrunyT. D. BurchellJ. R. ColeR. P. DeublerA. C. EberhardtB. A. ErlerG. M. FosterW. HoffelnerR. M. JesseeR. I. JetterC. C. KimG. H. KooV. KostarevK. A. ManolyD. E. Matthews

R. P. McIntyreM. N. MitchellM. MorishitaD. K. MortonT. NagataR. F. Reedy, Sr.I. SaitoC. T. SmithW. K. Sowder, Jr.W. J. SperkoK. R. WichmanC. S. WithersY. H. Choi, DelegateT. Ius, DelegateH.-T. Wang, DelegateM. Zhou, Contributing MemberE. B. Branch, Honorary MemberG. D. Cooper, Honorary MemberW. D. Doty, Honorary MemberD. F. Landers, Honorary MemberR. A. Moen, Honorary MemberC. J. Pieper, Honorary Member

Subcommittee on Design (BPV III)

R. P. Deubler, ChairD. E. Matthews, Vice ChairG. L. Hollinger, SecretaryT. M. AdamsG. A. AntakiR. L. BrattonC. W. BrunyP. R. DonavinR. S. Hill IIIP. HirschbergM. H. JawadR. I. Jetter

R. B. Keating

R. A. Ladefian

K. A. Manoly

R. J. Masterson

M. N. Mitchell

W. J. O’Donnell, Sr.E. L. Pleins

T.-L. Sham

J. P. Tucker

K. Wright

J. Yang

Subgroup on Component Design (SC-D) (BPV III)

T. M. Adams, ChairR. B. Keating, Vice ChairS. Pellet, SecretaryG. A. AntakiS. AsadaJ. F. BallJ. R. ColeR. P. DeublerP. HirschbergH. KobayashiR. A. LadefianK. A. ManolyR. J. MastersonD. E. MatthewsJ. C. MinichielloD. K. Morton

T. M. MustoT. NagataA. N. NguyenE. L. PleinsI. SaitoG. C. SlagisJ. R. StinsonG. Z. TokarskiJ. P. TuckerP. VockK. R. WichmanC. WilsonJ. YangC. W. Bruny, Contributing MemberA. A. Dermenjian, ContributingMember

Working Group on Core Support Structures (SG-CD) (BPV III)

J. Yang, ChairJ. F. Kielb, SecretaryL. C. HartlessD. KeckT. LiszkaiH. S. Mehta

M. Nakajima

M. D. Snyder

A. Tsirigotis

R. Vollmer

J. T. Land, Contributing Member

Working Group on Design of Division 3 Containments(SG-CD) (BPV III)

D. K. Morton, ChairD. J. AmmermanG. BjorkmanG. BrozS. HorowitzD. W. LewisJ. C. Minichiello

E. L. Pleins

C. J. Temus

I. D. McInnes, Contributing Member

R. E. Nickell, Contributing Member

H. P. Shrivastava, ContributingMember

Working Group on HDPE Design of Components (SG-CD) (BPV III)

T. M. Musto, ChairJ. Ossmann, SecretaryT. M. AdamsT. A. BaconC. BasavarajuD. BurwellS. Choi

P. KrishnaswamyM. MartinJ. C. MinichielloD. P. MunsonF. J. Schaaf, Jr.R. StakenborghsH. E. Svetlik

xxv

Working Group on Piping (SG-CD) (BPV III)

G. A. Antaki, ChairG. Z. Tokarski, SecretaryT. M. AdamsT. A. BaconC. BasavarajuJ. CatalanoF. ClaeysJ. R. ColeC. M. FaidyR. G. GiladaN. M. GrahamM. A. GrayR. W. HauptA. HiranoP. HirschbergM. KassarJ. Kawahata

R. B. KeatingV. KostarevY. LiuJ. F. McCabeJ. C. MinichielloI.-K. NamA. N. NguyenM. S. SillsG. C. SlagisN. C. SutherlandE. A. WaisC.-I. WuJ. J. Martinez, Contributing MemberN. J. Shah, Contributing MemberE. C. Rodabaugh, HonoraryMember

Working Group on Pressure Relief (SG-CD) (BPV III)

J. F. Ball, ChairA. L. Szeglin

D. G. Thibault

Working Group on Pumps (SG-CD) (BPV III)

R. A. Ladefian, ChairP. W. BehnkeR. E. Cornman, Jr.M. D. EftychiouA. FraserM. A. GaydonR. Ghanbari

M. Higuchi

S. Mauvais

R. A. Patrick

J. Sulley

R. Udo

A. G. Washburn

Working Group on Supports (SG-CD) (BPV III)

J. R. Stinson, ChairU. S. Bandyopadhyay, SecretaryK. AvrithiT. H. BakerF. J. BirchR. P. DeublerN. M. GrahamR. J. Masterson

S. PelletI. SaitoH. P. ShrivastavaC. StirzelT. G. TerryahG. Z. TokarskiP. WisemanC.-I. Wu

Working Group on Valves (SG-CD) (BPV III)

P. Vock, ChairJ. O'Callaghan, SecretaryM. C. BuckleyG. A. JollyJ. KleinT. A. McMahon

C. A. MizerK. E. Reid IIH. R. SondereggerJ. SullyI. TsengJ. P. Tucker

Working Group on Vessels (SG-CD) (BPV III)

D. E. Matthews, ChairR. M. Wilson, SecretaryC. BasavarajuJ. V. Gregg, Jr.W. J. HeilkerA. KalninsR. B. KeatingD. KeckJ. KimO.-S. Kim

K. Matsunaga

M. C. Scott

P. K. Shah

J. Shupert

C. Turylo

D. Vlaicu

W. F. Weitze

T. Yamazaki

R. Z. Ziegler

Subgroup on Design Methods (SC-D) (BPV III)

C. W. Bruny, ChairS. McKillop, SecretaryK. AvrithiW. CulpP. R. Donavin, Jr.J. V. Gregg, Jr.H. T. Harrison IIIK. HsuM. Kassar

D. KeckM. N. MitchellW. J. O’Donnell, Sr.P. J. O’ReganW. D. ReinhardtP. SmithS. D. SnowW. F. WeitzeK. Wright

Working Group on Design Methodology (SG-DM) (BPV III)

S. D. Snow, ChairM. R. Breach, SecretaryK. AvrithiC. BasavarajuR. D. BlevinsD. L. CaldwellD. DeweesC. M. FaidyH. T. Harrison IIIP. HirschbergM. KassarR. B. KeatingJ. KimH. Kobayashi

T. LiszkaiJ. F. McCabeA. N. NguyenW. D. ReinhardtD. H. RoartyP. K. ShahR. VollmerS. WangT. M. WigerK. WrightJ. YangM. K. Au-Yang, ContributingMember

Working Group on Environmental Effects (SG-DM) (BPV III)

W. Culp, ChairB. D. Frew, SecretaryK. AvrithiP. J. DobsonW. J. Heilker

C. JonkerJ. E. NestellT. SchrieferM. S. SheltonY. H. Choi, Delegate

Working Group on Environmental Fatigue Evaluation Methods(SG-DM) (BPV III)

K. Wright, ChairM. A. Gray, Vice ChairW. F. Weitze, SecretaryT. M. AdamsS. AsadaK. AvrithiR. C. CipollaJ. R. ColeT. M. DamianiC. M. Faidy

T. D. GilmanS. R. GosselinY. HeP. HirschbergH. S. MehtaJ.-S. ParkD. H. RoartyI. SaitoD. VlaicuR. Z. Ziegler

Working Group on Fatigue Strength (SG-DM) (BPV III)

P. R. Donavin, ChairT. M. DamianiD. DeweesC. M. FaidyS. R. GosselinR. J. GurdalC. F. Heberling IIC. E. HinnantP. HirschbergK. HsuS. H. KleinsmithS. Majumdar

S. N. Malik

D. H. Roarty

M. S. Shelton

G. Taxacher

A. Tsirigotis

K. Wright

H. H. Ziada

G. S. Chakrabarti, ContributingMember

W. J. O'Donnell, Sr., ContributingMember

xxvi

Working Group on Graphite and Composites Design(SG-DM) (BPV III)

M. N. Mitchell, ChairM. W. Davies, Vice ChairC. A. Sanna, Staff SecretaryT. D. Burchell, SecretaryA. AppletonR. L. BrattonS. CadellS.-H. ChiA. CovacS. W. Doms

S. F. Duffy

S. T. Gonczy

Y. Katoh

J. Ossmann

M. Roemmler

N. Salstrom

T. Shibata

S. Yu

G. L. Zeng

Working Group on Probabilistic Methods in Design(SG-DM) (BPV III)

P. J. O'Regan, ChairM. Golliet, SecretaryT. AsayamaK. AvrithiM. R. Graybeal

D. O. HenryR. S. Hill IIIM. MorishitaN. A. PalmI. Saito

Special Working Group on Computational Modeling for ExplicitDynamics (SG-DM) (BPV III)

G. Bjorkman, ChairD. J. Ammerman, SecretaryM. R. BreachG. BrozJ. JordanD. MolitorisJ. Piotter

W. D. Reinhardt

P. Y.-K. Shih

S. D. Snow

C.-F. Tso

M. C. Yaksh

U. Zencker

Subgroup on Elevated Temperature Design (SC-D) (BPV III)

T.-L. Sham, ChairT. AsayamaC. Becht IVF. W. BrustP. CarterJ. F. CervenkaB. F. HantzW. HoffelnerA. B. HullM. H. JawadR. I. Jetter

G. H. Koo

M. Li

S. Majumdar

J. E. Nestell

W. J. O'Donnell, Sr.

R. W. Swindeman

D. S. Griffin, Contributing Member

W. J. Koves, Contributing Member

D. L. Marriott, ContributingMember

Working Group on Allowable Stress Criteria (SG-ETD) (BPV III)

R. W. Swindeman, ChairR. Wright, SecretaryJ. R. FouldsK. KimuraM. LiS. N. Malik

J. E. Nestell

W. Ren

B. W. Roberts

M. Sengupta

T.-I. Sham

Working Group on Analysis Methods (SG-ETD) (BPV III)

P. Carter, ChairM. J. Swindeman, SecretaryM. AndoM. R. Breach

R. I. JetterS. KrishnamurthyT.-I. ShamD. K. Williams

Working Group on Creep-Fatigue and Negligible Creep (SG-ETD)(BPV III)

T. Asayama, ChairM. Li, SecretaryF. W. BrustP. CarterR. I. Jetter

G. H. KooB.-L. LyowS. N. MalikH. QianT.-I. Sham

Working Group on Elevated Temperature Construction (SG-ETD)(BPV III)

M. H. Jawad, ChairB. Mollitor, SecretaryD. I. AndersonR. G. BrownD. DeweesJ. P. GlaspieB. F. Hantz

G. L. HollingerR. I. JetterS. KrishnamurthyA. MannD. L. MarriottM. N. MitchellC. Nadarajah

Working Group on High Temperature Flaw Evaluation (SG-ETD)(BPV III)

F. W. Brust, ChairN. BroomP. CarterW. HoffelnerS. N. Malik

D. L. RudlandP. J. RushD.-J. ShimS. X. Xu

Subgroup on General Requirements (BPV III)

R. P. McIntyre, ChairL. M. Plante, SecretaryV. ApostolescuA. AppletonS. BellJ. R. BerryB. K. BoboJ. DeKleineJ. V. GardinerG. GrattiJ. W. HighlandsG. V. ImbroK. A. Kavanagh

Y.-S. KimM. R. MinickE. C. RenaudD. J. RoszmanC. T. SmithW. K. Sowder, Jr.G. E. SzabaturaT. G. TerryahD. M. VickeryC. S. WithersH. Michael, DelegateG. L. Hollinger, ContributingMember

Working Group on Duties and Responsibilities (SG-GR) (BPV III)

J. V. Gardiner, ChairG. L. Hollinger, SecretaryS. BellJ. R. BerryJ. DeKleineN. DeSantisY. Diaz-CastilloE. L. Farrow

G. Gratti

B. N. Juarez

K. A. Kavanagh

J. M. Lyons

L. M. Plante

D. J. Roszman

T. G. Terryah

xxvii

Working Group on Quality Assurance, Certification, and Stamping(SG-GR) (BPV III)

C. T. Smith, ChairC. S. Withers, SecretaryV. ApostolescuA. AppletonB. K. BoboS. M. GoodwinJ. GrimmJ. W. HighlandsY.-S. KimB. McGloneR. P. McIntyre

M. R. Minick

R. B. Patel

E. C. Renaud

T. Rezk

J. Rogers

W. K. Sowder, Jr.

J. F. Strunk

G. E. Szabatura

D. M. Vickery

C. A. Spletter, Contributing Member

Special Working Group on General Requirements Consolidation(SG-GR) (BPV III)

J. V. Gardiner, ChairC. T. Smith, Vice ChairS. BellM. CusickY. Diaz-CastilloJ. GrimmJ. M. LyonsM. McGloneR. PatelE. C. Renaud

T. RezkJ. RogersD. J. RoszmanB. S. SandhuG. J. SoloveyR. SpuhlG. E. SzabaturaC. S. WithersS. F. Harrison, ContributingMember

Subgroup on Materials, Fabrication, and Examination (BPV III)

R. M. Jessee, ChairB. D. Frew, Vice ChairS. Hunter, SecretaryW. H. BorterT. D. BurchellG. R. CannellR. H. DavisG. M. FosterG. B. GeorgievS. E. GingrichM. GollietJ. GrimmJ. Johnston, Jr.C. C. KimM. Lashley

T. MelfiH. MurakamiJ. OssmannJ. E. O’SullivanC. PearceN. M. SimpsonW. J. SperkoJ. R. StinsonJ. F. StrunkK. B. StuckeyR. WrightS. YeeH. Michael, DelegateR. W. Barnes, Contributing Member

Working Group on Graphite and Composite Materials (SG-MFE)(BPV III)

T. D. Burchell, ChairA. AppletonR. L. BrattonS. CadellS.-H. ChiA. CovacM. W. DaviesS. W. DomsS. F. DuffyS. T. Gonzcy

M. G. Jenkins

Y. Katoh

M. N. Mitchell

J. Ossmann

M. Roemmler

N. Salstrom

T. Shibata

S. Yu

G. L. Zeng

Working Group on HDPE Materials (SG-MFE) (BPV III)

M. Golliet, ChairM. A. Martin, SecretaryW. H. BorterM. C. BuckleyE. M. FochtB. HaugerJ. Johnston, Jr.P. Krishnaswamy

E. W. McElroyT. M. MustoS. PattersonS. SchuesslerR. StakenborghsT. TiptonM. TroughtonZ. J. Zhou

Joint ACI-ASME Committee on Concrete Components for NuclearService (BPV III)

A. C. Eberhardt, ChairC. T. Smith, Vice ChairA. Byk, Staff SecretaryJ. F. ArtusoC. J. BangF. FarzamP. S. GhosalB. D. HovisT. C. InmanO. JovallN.-H. LeeJ. McLeanJ. MunshiN. OrbovicJ. F. Strunk

T. TonyanT. J. Ahl, Contributing MemberN. Alchaar, Contributing MemberB. A. Erler, Contributing MemberJ. Gutierrez, Contributing MemberM. F. Hessheimer, ContributingMember

T. E. Johnson, ContributingMember

T. Muraki, Contributing MemberB. B. Scott, Contributing MemberM. R. Senecal, ContributingMember

M. K. Thumm, ContributingMember

Working Group on Design (BPV III-2)

J. Munshi, ChairN. AlchaarM. AllamS. BaeL. J. ColarussoA. C. EberhardtF. FarzamP. S. GhosalB. D. HovisT. C. InmanO. JovallN.-H. Lee

M. Diaz, Contributing Member

S. Diaz, Contributing Member

M. F. Hessheimer, ContributingMember

A. Istar, Contributing Member

T. E. Johnson, ContributingMember

B. R. Laskewitz, ContributingMember

Z. Shang, Contributing Member

M. Sircar, Contributing Member

Working Group on Materials, Fabrication, and Examination(BPV III-2)

P. S. Ghosal, ChairT. Tonyan, Vice ChairM. AllamJ. F. ArtusoJ.-B. DomageA. C. EberhardtC. Jones

C. T. Smith

J. F. Strunk

D. Ufuk

J. Gutierrez, Contributing Member

B. B. Scott, Contributing Member

Z. Shang, Contributing Member

Special Working Group on Modernization (BPV III-2)

J. McLean, ChairN. Orbovic, Vice ChairA. AdediranN. AlchaarO. JovallC. T. Smith

M. A. Ugalde

S. Wang

S. Diaz, Contributing Member

J.-B. Domage, Contributing Member

U. Ricklefs, Contributing Member

xxviii

Subgroup on Containment Systems for Spent Fuel and High-LevelWaste Transport Packagings (BPV III)

D. K. Morton, ChairG. M. Foster, Vice ChairG. R. Cannell, SecretaryG. AbramczykD. J. AmmermanG. BjorkmanS. HorowitzD. W. LewisP. E. McConnellR. E. NickellE. L. Pleins

R. H. Smith

G. J. Solovey

C. J. Temus

W. H. Borter, Contributing Member

R. S. Hill III, Contributing Member

A. B. Meichler, ContributingMember

T. Saegusa, Contributing Member

N. M. Simpson, ContributingMember

Subgroup on Fusion Energy Devices (BPV III)

W. K. Sowder, Jr., ChairD. Andrei, Staff SecretaryD. J. Roszman, SecretaryR. W. BarnesB. R. DoshiM. HiguchiG. HoltmeierM. KalseyK. A. KavanaghH. J. KimK. Kim

I. KimihiroS. LeeG. LiX. LiP. MokariaT. R. MuldoonM. PortonY. SongM. TrosenC. WaldonI. J. Zatz

Working Group on General Requirements (BPV III-4)

W. K. Sowder, Jr., Chair

Working Group on In-Vessel Components (BPV III-4)

M. Kalsey, Chair

Working Group on Magnets (BPV III-4)

K. Kim, Chair

Working Group on Materials (BPV III-4)

M. Porton, Chair

Working Group on Vacuum Vessels (BPV III-4)

I. Kimihiro, Chair B. R. Doshi

Subgroup on High Temperature Reactors (BPV III)

M. Morishita, ChairR. I. Jetter, Vice ChairT.-L. Sham, SecretaryN. BroomT. D. BurchellW. Hoffelner

G.-H. KooD. K. MortonJ. E. NestellN. N. RayX. Li, Contributing MemberL. Shi, Contributing Member

Working Group on High Temperature Gas-Cooled Reactors(BPV III-5)

J. E. Nestell, ChairM. Sengupta, SecretaryN. BroomT. D. BurchellR. S. Hill IIIE. V. ImbroR. I. JetterY. W. Kim

T. R. Lupold

S. N. Malik

D. L. Marriott

D. K. Morton

T.-L. Sham

X. Li, Contributing Member

L. Shi, Contributing Member

Working Group on High Temperature Liquid-Cooled Reactors(BPV III-5)

T.-L. Sham, ChairT. Asayama, SecretaryM. ArcaroR. W. BarnesP. CarterM. E. CohenA. B. HullR. I. Jetter

G. H. Koo

M. Li

S. Majumdar

M. Morishita

J. E. Nestell

X. Li, Contributing Member

G. Wu, Contributing Member

Executive Committee (BPV III)

R. S. Hill III, ChairA. Byk, Staff SecretaryT. M. AdamsC. W. BrunyR. P. DeublerA. C. EberhardtR. M. JesseeR. B. Keating

R. P. McIntyre

J. C. Minichiello

M. Morishita

D. K. Morton

C. A. Sanna

T.-L. Sham

W. K. Sowder, Jr.

China International Working Group (BPV III)

J. Yan, ChairW. Tang, Vice ChairC. A. Sanna, Staff SecretaryY. He, SecretaryH. GeZ. HanJ. JianY. JingF. KaiD. KangX. LiY. LiB. LiangH. LinS. LinJ. LiuS. LiuW. LiuK. MaoW. Pei

G. SunG. TangY. TuY. WangH. WuX. WuZ. WuS. XueZ. YanC. YeZ. YinS. ZaozhanG. ZhangK. ZhangW. ZhangG. ZhaoW. ZhaoY. ZhongZ. ZhongG. Zhu

xxix

Germany International Working Group (BPV III)

C. Huttner, ChairH.-R. Bath, SecretaryB. ArndtM. BauerG. DaumL. GerstnerG. HaenleK.-H. HerterU. JendrichG. KramarzC. KrumbW. MayingerD. Moehring

D. OstermannG. RoosJ. RudolphC. A. SannaH. SchauC. A. SpletterR. TrieglaffP. VöllmeckeJ. WendtF. WilleM. WinterN. Wirtz

India International Working Group (BPV III)

B. Basu, ChairG. Mathivanan, Vice ChairC. A. Sanna, Staff SecretaryS. B. Parkash, SecretaryV. BhasinP. ChellapandiS. Jalaldeen

D. Kulkarni

S. A. Kumar De

N. M. Nadaph

M. Ponnusamy

R. N. Sen

A. Sundararajan

Korea International Working Group (BPV III)

G. H. Koo, ChairS. S. Hwang, Vice ChairO.-S. Kim, SecretaryH. S. ByunS. ChoiJ.-Y. HongN.-S. HuhJ.-K. HwangC. JangI. I. JeongH. J. KimJ. KimJ.-S. KimK. KimY.-B. KimY.-S. Kim

D. KwonB. LeeD. LeeSanghoon LeeSangil LeeD. J. LimH. LimI.-K. NamB. NohC.-K. OhC. ParkJ.-S. ParkT. ShinS. SongO. Yoo

Special Working Group on Editing and Review (BPV III)

D. K. Morton, ChairR. L. BrattonR. P. DeublerA. C. EberhardtR. I. Jetter

J. C. MinichielloL. M. PlanteR. F. Reedy, Sr.W. K. Sowder, Jr.C. Wilson

Special Working Group on HDPE Stakeholders (BPV III)

D. Burwell, ChairS. Patterson, SecretaryT. M. AdamsS. BruceS. ChoiC. M. FaidyE. M. FochtM. GollietJ. GrimesR. M. JesseeJ. Johnston, Jr.D. Keller

M. LashleyT. R. LupoldK. A. ManolyD. P. MunsonT. M. MustoJ. E. O’SullivanM. A. RichterV. RohatgiF. J. Schaaf, Jr.R. StakenborghsM. TroughtonZ. J. Zhou

Special Working Group on Honors and Awards (BPV III)

R. M. Jessee, ChairA. AppletonR. W. Barnes

J. R. ColeD. E. MatthewsJ. C. Minichiello

Special Working Group on Industry Experience for New Plants(BPV III & BPV XI)

G. M. Foster, ChairJ. T. Lindberg, ChairH. L. Gustin, SecretaryJ. Ossmann, SecretaryT. L. ChanD. R. GrahamP. J. HennesseyD. O. HenryJ. HoncharikE. V. ImbroC. G. KimO.-S. Kim

Y.-S. Kim

K. Matsunaga

D. E. Matthews

R. E. McLaughlin

E. L. Pleins

D. W. Sandusky

D. M. Swann

T. Tsuruta

E. R. Willis

R. M. Wilson

S. M. Yee

Special Working Group on International Meetings (BPV III)

C. T. Smith, ChairA. Byk, Staff SecretaryT. D. BurchellS. W. CameronJ. R. ColeR. L. Crane

G. M. Foster

R. S. Hill III

M. N. Mitchell

R. F. Reedy, Sr.

C. A. Sanna

Special Working Group on New Advanced Light Water Reactor PlantConstruction Issues (BPV III)

E. L. Pleins, ChairM. C. Scott, SecretaryA. CardilloP. J. CocoB. GilliganJ. HoncharikG. V. ImbroO.-S Kim

M. KrisJ. C. MinichielloD. W. SanduskyC. A. SannaR. R. StevensonR. TroficantoM. L. WilsonJ. Yan

Special Working Group on Regulatory Interface (BPV III)

G. V. Imbro, ChairS. Bell, SecretaryA. CardilloA. A. DermenjianB. N. JuarezK. Matsunaga

D. E. MatthewsA. T. Roberts IIIR. R. StevensonD. TeraoM. L. WilsonR. A. Yonekawa

COMMITTEE ON HEATING BOILERS (BPV IV)

T. L. Bedeaux, ChairJ. A. Hall, Vice ChairG. Moino, Staff SecretaryB. CalderonJ. CallandJ. P. ChicoineC. M. DoveA. HeinoB. J. IskeP. A. Molvie

R. E. Olson

M. Wadkinson

R. V. Wielgoszinski

H. Michael, Delegate

D. Picart, Delegate

S. V. Voorhees, ContributingMember

J. L. Kleiss, Alternate

W. L. Haag, Jr., Honorary Member

xxx

Subgroup on Care and Operation of Heating Boilers (BPV IV)

M. Wadkinson, ChairT. L. BedeauxJ. Calland

J. A. HallP. A. Molvie

Subgroup on Cast Iron Boilers (BPV IV)

J. P. Chicoine, ChairT. L. Bedeaux, Vice ChairC. M. Dove

J. M. DownsJ. A. HallJ. L. Kleiss

Subgroup on Materials (BPV IV)

J. A. Hall, ChairM. Wadkinson, Vice ChairJ. CallandJ. M. Downs

A. HeinoB. J. IskeJ. L. KleissE. Rightmier

Subgroup on Water Heaters (BPV IV)

J. Calland, ChairJ. P. ChicoineB. J. Iske

R. E. OlsonT. E. Trant

Subgroup on Welded Boilers (BPV IV)

J. Calland, ChairT. L. BedeauxB. CalderonJ. L. Kleiss

P. A. MolvieR. E. OlsonM. WadkinsonR. V. Wielgoszinski

COMMITTEE ON NONDESTRUCTIVE EXAMINATION (BPV V)

G. W. Hembree, ChairF. B. Kovacs, Vice ChairJ. S. Brzuszkiewicz, Staff SecretaryS. J. AkrinC. A. AndersonJ. E. BateyA. S. BirksP. L. BrownM. A. BurnsB. CaccamiseN. Y. FaranssoN. A. FinneyA. F. GarbolevskyJ. F. Halley

J. W. HoufS. A. JohnsonR. W. KruzicC. MayA. B. NagelT. L. PlasekF. J. SattlerG. M. Gatti, DelegateX. Guiping, DelegateB. D. Laite, AlternateH. C. Graber, Honorary MemberO. F. Hedden, Honorary MemberJ. R. MacKay, Honorary MemberT. G. McCarty, Honorary Member

Subgroup on General Requirements/Personnel Qualifications andInquiries (BPV V)

F. B. Kovacs, ChairJ. W. Houf, Vice ChairS. J. AkrinC. A. AndersonJ. E. BateyA. S. BirksC. EmslanderN. Y. Faransso

N. A. Finney

G. W. Hembree

S. A. Johnson

D. I. Morris

A. B. Nagel

J. P. Swezy, Jr., ContributingMember

Special Working Group on NDE Resource Support (SG-GR/PQ & I)(BPV V)

N. A. Finney, ChairD. AdkinsJ. AndersonT. G. BollhalterC. T. BrownN. Carter

J. L. Garner

M. Ghahremani

J. W. Mefford, Jr.

M. Sens

D. Van Allen

Subgroup on Surface Examination Methods (BPV V)

S. A. Johnson, ChairJ. Halley, Vice ChairS. J. AkrinJ. E. BateyA. S. BirksP. L. BrownB. CaccamiseN. Y. FaranssoN. FarenbaughN. A. Finney

G. W. Hembree

R. W. Kruzic

B. D. Laite

C. May

L. E. Mullins

A. B. Nagel

F. J. Sattler

P. Shaw

G. M. Gatti, Delegate

Subgroup on Volumetric Methods (BPV V)

A. B. Nagel, ChairN. A. Finney, Vice ChairS. J. AkrinJ. E. BateyP. L. BrownB. CaccamiseN. Y. FaranssoA. F. GarbolevskyJ. F. HalleyR. W. Hardy

G. W. HembreeS. A. JohnsonF. B. KovacsR. W. KruzicC. MayL. E. MullinsT. L. PlasekF. J. SattlerM. TorokG. M. Gatti, Delegate

Working Group on Acoustic Emissions (SG-VM) (BPV V)

N. Y. Faransso, ChairJ. E. Batey, Vice Chair

S. R. DoctorR. K. Miller

Working Group on Radiography (SG-VM) (BPV V)

B. Caccamise, ChairF. B. Kovacs, Vice ChairS. J. AkrinJ. E. BateyP. L. BrownC. EmslanderN. Y. FaranssoA. F. GarbolevskyR. W. HardyG. W. Hembree

S. A. Johnson

R. W. Kruzic

B. D. Laite

S. Mango

C. May

R. J. Mills

A. B. Nagel

T. L. Plasek

M. Torok

Working Group on Ultrasonics (SG-VM) (BPV V)

N. A. Finney, ChairJ. F. Halley, Vice ChairB. CaccamiseK. J. ChizenJ. M. DavisN. Y. FaranssoP. T. HayesS. A. Johnson

R. W. Kruzic

B. D. Laite

C. May

L. E. Mullins

A. B. Nagel

F. J. Sattler

M. Torok

xxxi

Working Group on GuidedWave Ultrasonic Testing (SG-VM) (BPV V)

N. Y. Faransso, ChairJ. E. Batey, Vice ChairD. AlleyneN. AmirJ. F. Halley

S. A. JohnsonG. M. LightP. MudgeM. J. QuarryJ. Vanvelsor

COMMITTEE ON PRESSURE VESSELS (VIII)

R. J. Basile, ChairS. C. Roberts, Vice ChairS. J. Rossi, Staff SecretaryT. Schellens, Staff SecretaryG. Aurioles, Sr.V. BogosianJ. CameronA. ChaudouetD. B. DeMichaelJ. P. GlaspieJ. F. GrubbL. E. Hayden, Jr.G. G. KarcherD. L. KurleK. T. LauM. D. LowerR. MahadeenR. W. MikitkaU. R. MillerT. W. NortonT. P. PastorD. T. PetersM. J. Pischke

M. D. RanaG. B. Rawls, Jr.F. L. RichterC. D. RoderyE. SoltowD. A. SwansonJ. P. Swezy, Jr.S. TeradaE. UpitisP. A. McGowan, DelegateH. Michael, DelegateK. Oyamada, DelegateM. E. Papponetti, DelegateD. Rui, DelegateT. Tahara, DelegateM. Gold, Contributing MemberW. S. Jacobs, Contributing MemberK. Mokhtarian, ContributingMember

C. C. Neely, Contributing MemberA. Selz, Contributing MemberK. K. Tam, Contributing Member

Subgroup on Design (BPV VIII)

D. A. Swanson, ChairJ. C. Sowinski, Vice ChairM. Faulkner, SecretaryG. Aurioles, Sr.S. R. BabkaO. A. BarskyR. J. BasileM. R. BreachF. L. BrownD. ChandiramaniB. F. HantzC. E. HinnantC. S. HinsonM. H. JawadD. L. KurleM. D. LowerR. W. MikitkaU. R. Miller

T. P. PastorM. D. RanaG. B. Rawls, Jr.S. C. RobertsC. D. RoderyD. SrnicJ. VattappillyR. A. WhippleK. XuK. Oyamada, DelegateM. E. Papponetti, DelegateW. S. Jacobs, Contributing MemberP. K. Lam, Contributing MemberK. Mokhtarian, ContributingMember

A. Selz, Contributing MemberS. C. Shah, Contributing MemberK. K. Tam, Contributing Member

Working Group on Design-By-Analysis (BPV III)

B. F. Hantz, ChairT. W. Norton, SecretaryR. G. BrownD. DeweesR. D. DixonZ. GuC. E. HinnantR. JainM. H. Jawad

S. KrishnamurthyA. MannG. A. MillerC. NadarajahM. D. RanaT. G. SeippM. A. ShahS. TeradaD. Arnett, Contributing Member

Subgroup on Fabrication and Inspection (BPV VIII)

C. D. Rodery, ChairJ. P. Swezy, Jr., Vice ChairB. R. Morelock, SecretaryL. F. CampbellD. I. MorrisO. MuletM. J. PischkeM. J. RiceB. F. Shelley

P. L. Sturgill

E. A. Whittle

K. Oyamada, Delegate

W. J. Bees, Contributing Member

W. S. Jacobs, Contributing Member

J. Lee, Contributing Member

R. Uebel, Contributing Member

E. Upitis, Contributing Member

Subgroup on General Requirements (BPV VIII)

M. D. Lower, ChairJ. P. Glaspie, Vice ChairF. L. Richter, SecretaryR. J. BasileV. BogosianD. T. DavisD. B. DeMichaelM. FaulkenerL. E. Hayden, Jr.K. T. Lau

A. S. OlivaresT. P. PastorS. C. RobertsJ. C. SowinskiP. SperanzaD. B. StewartD. A. SwansonR. UebelK. Oyamada, DelegateC. C. Neely, Contributing Member

Task Group on U-2(g) (BPV VIII)

S. R. BabkaR. J. BasileD. K. ChandiramaniR. MahadeenU. R. MillerT. W. NortonT. P. Pastor

R. F. Reedy, Sr.S. C. RobertsM. A. Shah, Jr.D. SrnicD. A. SwansonR. UebelK. K. Tam, Contributing Member

Subgroup on Heat Transfer Equipment (BPV VIII)

G. Aurioles, Sr., ChairP. Matkovics, SecretaryD. AngstadtS. R. BabkaM. BahadoriJ. H. BarbeeO. A. BarskyI. G. CampbellA. ChaudouetM. D. ClarkS. JeyakumarG. G. KarcherD. L. KurleB. J. Lerch

R. MahadeenS. MayeuxU. R. MillerT. W. NortonK. OyamadaD. SrnicA. M. VoytkoR. P. WibergF. E. Jehrio, Contributing MemberJ. Mauritz, Contributing MemberF. Osweiller, Contributing MemberR. Tiwari, Contributing MemberS. Yokell, Contributing MemberS. M. Caldwell, Honorary Member

Task Group on Plate Heat Exchangers (BPV VIII)

M. J. Pischke, ChairS. R. BabkaS. FlynnJ. F. GrubbF. HamtakJ. E. Lane

R. MahadeenP. MetkovicsD. I. MorrisC. M. RomeroE. SoltowD. Srnic

xxxii

Subgroup on High Pressure Vessels (BPV VIII)

D. T. Peters, ChairR. D. Dixon, Vice ChairR. T. Hallman, Vice ChairA. P. Maslowski, Staff SecretaryL. P. AntalffyR. C. BielP. N. ChakuR. CordesL. FridlundD. M. FryerA. H. HonzaJ. A. KappJ. KeltjensA. K. KhareN. McKieS. C. Mordre

G. T. NelsonE. A. RodriguezE. D. RollK. C. Simpson, Jr.D. L. StangF. W. TatarS. TeradaJ. L. TraudR. WinkK.-J. YoungK. Oyamada, DelegateR. M. Hoshman, ContributingMember

G. J. Mraz, Contributing MemberD. J. Burns, Honorary MemberE. H. Perez, Honorary Member

Subgroup on Materials (BPV VIII)

J. F. Grubb, ChairJ. Cameron, Vice ChairP. G. Wittenbach, SecretaryA. Di RienzoJ. D. FritzM. KatcherM. KowalczykW. M. LundyJ. PensoD. W. Rahoi

R. C. Sutherlin

E. Upitis

K. Xu


G. S. Dixit, Contributing Member

M. Gold, Contributing Member

J. A. McMaster, ContributingMember

E. G. Nisbett, Contributing Member

Subgroup on Toughness (BPV II & BPV VIII)

D. L. Kurle, ChairK. Xu, Vice ChairR. J. BasileW. S. JacobsM. D. RanaF. L. RichterK. SubramanianD. A. Swanson

J. P. Swezy, Jr.

E. Upitis

J. Vattappilly


K. Mokhtarian, ContributingMember

C. C. Neely, Contributing Member

Subgroup on Graphite Pressure Equipment (BPV VIII)

E. Soltow, ChairG. C. BechererT. F. BonnF. L. Brown

M. R. MinickA. A. StupicaA. Viet

Italy International Working Group (BPV VIII)

G. Pontiggia, ChairA. Veroni, SecretaryB. G. AlboraliP. AngeliniR. BoattiA. CamanniP. ContiP. L. DinelliF. FincoL. GaetaniA. Ghidini

M. Guglielmetti

P. Mantovani

M. Maroni

M. Massobrio

L. Moracchioli

L. Possenti

C. Sangaletti

A. Teli

I. Venier

G. Gobbi, Contributing Member

Special Working Group on Bolted Flanged Joints (BPV VIII)

R. W. Mikitka, ChairG. D. BibelW. BrownH. ChenW. J. Koves

M. MorishitaJ. R. PayneG. B. Rawls, Jr.M. S. Shelton

Working Group on Design (BPV VIII Div. 3)

J. Keltjens, ChairC. Becht VR. C. BielR. CordesR. D. DixonL. FridlundR. T. HallmanG. M. MitalS. C. MordreG. T. NelsonD. T. PetersE. D. Roll

K. C. SimpsonD. L. StangK. SubramanianS. TeradaJ. L. TraudR. WinkY. XuF. Kirkemo, Contributing MemberD. J. Burns, Honorary MemberD. M. Fryer, Honorary MemberG. J. Mraz, Honorary MemberE. H. Perez, Honorary Member

Working Group on Materials (BPV VIII Div. 3)

F. W. Tatar, ChairL. P. AntalffyP. N. Chaku

J. A. KappA. K. Khare

Task Group on Impulsively Loaded Vessels (BPV VIII)

E. A. Rodriguez, ChairP. O. Leslie, SecretaryG. A. AntakiJ. K. AsahinaD. D. BarkerA. M. ClaytonJ. E. Didlake, Jr.T. A. DuffeyB. L. HaroldsenK. HayashiD. HildingK. W. KingR. Kitamura

R. A. Leishear

R. E. Nickell

F. Ohlson

C. Romero

N. Rushton

J. H. Stofleth

Q. Dong, Contributing Member

H.-P. Schildberg, ContributingMember

J. E. Shepherd, ContributingMember

M. Yip, Contributing Member

Subgroup on Interpretations (BPV VIII)

U. R. Miller, ChairT. Schellens, Staff SecretaryG. Aurioles, Sr.R. J. BasileJ. CameronR. D. DixonJ. F. GrubbD. L. KurleM. D. LowerR. Mahadeen

D. T. Peters

S. C. Roberts

C. D. Rodery

D. B. Stewart

P. L. Sturgill

D. A. Swanson

J. P. Swezy, Jr.

J. Vattappilly

T. P. Pastor, Contributing Member

xxxiii

COMMITTEE ON WELDING, BRAZING, AND FUSING (BPV IX)

W. J. Sperko, ChairD. A. Bowers, Vice ChairS. J. Rossi, Staff SecretaryM. BernasekM. L. CarpenterJ. G. FeldsteinP. D. FlennerS. E. GingrichR. M. JesseeJ. S. LeeW. M. LundyT. MelfiW. F. Newell, Jr.A. S. OlivaresD. K. PeetzM. J. PischkeM. J. Rice

M. B. SimsM. J. StankoP. L. SturgillJ. P. Swezy, Jr.P. L. Van FossonR. R. YoungA. Roza, DelegateR. K. Brown, Jr., ContributingMember

M. Consonni, Contributing MemberS. A. Jones, Contributing MemberS. Raghunathan, ContributingMember

W. D. Doty, Honorary MemberB. R. Newmark, Honorary MemberS. D. Reynolds, Jr., HonoraryMember

Subgroup on Brazing (BPV IX)

M. J. Pischke, ChairE. W. BeckmanL. F. CampbellM. L. Carpenter

A. F. GarbolevskyA. R. NyweningJ. P. Swezy, Jr.

Subgroup on General Requirements (BPV IX)

P. L. Sturgill, ChairE. W. BeckmanJ. P. BellG. ChandlerP. R. EvansA. HowardR. M. Jessee

A. S. OlivaresD. K. PeetzH. B. PorterK. R. WillensE. W. WoelfelE. Molina, DelegateB. R. Newmark, Honorary Member

Subgroup on Materials (BPV IX)

M. Bernasek, ChairT. AndersonJ. L. ArnoldM. L. CarpenterE. CutlipS. S. FioreS. E. GingrichL. HarbisonR. M. Jessee

C. C. KimT. MelfiM. J. PischkeC. E. SainzW. J. SperkoM. J. StankoP. L. SturgillR. R. YoungV. G. V. Giunto, Delegate

Subgroup on Performance Qualification (BPV IX)

D. A. Bowers, ChairM. J. Rice, SecretaryM. A. BoringR. B. CorbitP. D. FlennerK. L. Hayes

J. S. Lee

W. M. Lundy

T. Melfi

E. G. Reichelt

M. B. Sims

Subgroup on Plastic Fusing (BPV IX)

M. L. Carpenter, ChairD. BurwellJ. M. CraigM. GhahremaniK. L. HayesR. M. JesseeJ. Johnston, Jr.E. W. McElroyJ. E. O’SullivanE. G. ReicheltM. J. Rice

S. Schuessler

P. L. Sturgill

J. P. Swezy, Jr.

M. Troughton

E. W. Woelfel

J. Wright

J. C. Minichiello, ContributingMember

C. W. Rowley, ContributingMember

Subgroup on Procedure Qualification (BPV IX)

D. A. Bowers, ChairM. J. Rice, SecretaryM. BernasekM. A. BoringL. HarbisonW. M. LundyW. F. Newell, Jr.S. Raghunathan

M. B. SimsW. J. SperkoS. A. SpragueJ. P. Swezy, Jr.P. L. Van FossonT. C. WiesnerD. Chandiramani, ContributingMember

COMMITTEE ON FIBER-REINFORCED PLASTIC PRESSURE VESSELS(BPV X)

D. Eisberg, ChairB. F. Shelley, Vice ChairP. D. Stumpf, Staff SecretaryF. L. BrownJ. L. BustillosT. W. CowleyI. L. DinovoT. J. FowlerM. R. GormanB. HebbD. H. Hodgkinson

L. E. Hunt

D. L. Keeler

B. M. Linnemann

N. L. Newhouse

D. J. Painter

G. Ramirez

J. R. Richter

F. W. Van Name

D. O. Yancey, Jr.

P. H. Ziehl

COMMITTEE ON NUCLEAR INSERVICE INSPECTION (BPV XI)

G. C. Park, ChairR. W. Swayne, Vice ChairR. A. Yonekawa, Vice ChairR. L. Crane, Staff SecretaryJ. M. AgoldV. L. ArmentroutJ. F. BallW. H. BamfordT. L. ChanR. C. CipollaD. D. DavisG. H. DeBooR. L. DyleE. V. Farrell, Jr.E. L. FarrowE. B. GerlachR. E. GimpleT. J. GriesbachD. O. HenryR. D. KerrS. D. KulatD. W. LamondD. R. Lee

G. A. LofthusE. J. MaloneyJ. E. O’SullivanR. K. RhyneD. A. ScarthF. J. Schaaf, Jr.J. C. Spanner, Jr.G. L. StevensD. E. WaskeyJ. G. WeicksT. YuharaH. D. Chung, DelegateC. Ye, DelegateB. R. Newton, Contributing MemberR. A. West, Contributing MemberJ. Hakii, AlternateJ. T. Lindberg, AlternateC. J. Wirtz, AlternateC. D. Cowfer, Honorary MemberF. E. Gregor, Honorary MemberO. F. Hedden, Honorary MemberP. C. Riccardella, Honorary Member

xxxiv

Executive Committee (BPV XI)

R. A. Yonekawa, ChairG. C. Park, Vice ChairR. L. Crane, Staff SecretaryW. H. BamfordR. L. DyleM. J. FerlisiE. B. GerlachR. E. Gimple

S. D. Kulat

J. T. Lindberg

W. E. Norris

R. K. Rhyne

J. C. Spanner, Jr.

G. L. Stevens

R. W. Swayne

China International Working Group (BPV XI)

J. H. Liu, ChairY. Nie, Vice ChairC. Ye, Vice ChairM. W. Zhou, SecretaryJ. CaiD. X. ChenH. ChenH. D. ChenY. B. GuoY. HouP. F. HuD. M. KangX. Y. LiangZ. X. LiangS. X. Lin

L. Q. LiuY. LiuW. N. PeiC. L. PengG. X. TangQ. WangQ. W. WangZ. S. WangF. XuZ. Y. XuQ. YinK. ZhangY. ZhangZ. M. ZhongL. L. Zou

Germany International Working Group (BPV XI)

C. A. Spletter, SecretaryH.-R. BathB. HoffmannU. Jendrich

H. SchauX. SchulerJ. Wendt

Subgroup on Evaluation Standards (SG-ES) (BPV XI)

W. H. Bamford, ChairG. L. Stevens, SecretaryH. D. ChungR. C. CipollaG. H. DeBooR. L. DyleB. R. GantaT. J. GriesbachK. HasegawaK. HojoD. N. HopkinsK. Koyama

D. R. LeeY. LiR. O. McGillH. S. MehtaK. MiyazakiR. PaceJ. C. PoehlerS. RanganathD. A. ScarthT. V. VoK. R. WichmanS. X. Xu

Task Group on Evaluation of Beyond Design Basis Events (SG-ES)(BPV XI)

R. Pace, ChairK. E. Woods, SecretaryG. AntakiP. R. DonavinR. G. GiladaT. J. GriesbachH. L. GustinM. Hayashi

K. HojoS. A. KleinsmithH. S. MehtaD. V. SommervilleT. V. VoK. R. WichmanG. M. WilkowskiT. Weaver, Contributing Member

Working Group on Flaw Evaluation (SG-ES) (BPV XI)

R. C. Cipolla, ChairW. H. BamfordM. L. BensonB. BezensekH. D. ChungG. H. DeBooC. M. FaidyB. R. GantaR. G. GiladaH. L. GustinF. D. HayesP. H. HoangK. HojoD. N. HopkinsY. KimK. KoyamaV. LacroixD. R. Lee

Y. LiH. S. MehtaG. A. A. MiessiK. MiyazakiR. K. QashuS. RanganathH. RathbunP. J. RushD. A. ScarthW. L. ServerD.-J. ShimA. UdyawarT. V. VoB. WasilukK. R. WichmanG. M. WilkowskiD. L. Rudland, Alternate

Task Group on Evaluation Procedures for Degraded Buried Pipe(WG-PFE) (BPV XI)

R. O. McGill, ChairS. X. Xu, SecretaryG. AntakiR. C. CipollaG. H. DeBooK. HasegawaK. M. Hoffman

G. A. A. Miessi

M. Moenssens

D. P. Munson

R. Pace

P. J. Rush

D. A. Scarth

Working Group on Operating Plant Criteria (SG-ES) (BPV XI)

T. J. Griesbach, ChairV. Marthandam, SecretaryK. R. BakerW. H. BamfordH. BehnkeT. L. DicksonR. L. DyleA. E. FreedS. R. GosselinM. HayashiS. A. KleinsmithH. S. MehtaA. D. Odell

R. PaceN. A. PalmJ. C. PoehlerS. RanganathW. L. ServerD. V. SommervilleC. A. TomesA. UdyawarT. V. VoD. P. WeaklandK. E. WoodsT. Hardin, Alternate

Working Group on Pipe Flaw Evaluation (SG-ES) (BPV XI)

D. A. Scarth, ChairG. M. Wilkowski, SecretaryW. H. BamfordH. D. ChungR. C. CipollaN. G. CofieJ. M. DavisG. H. DeBooC. M. FaidyB. R. GantaS. R. GosselinL. F. GoyetteC. E. Guzman-LeongK. HasegawaP. H. HoangK. HojoD. N. HopkinsE. J. Houston

K. KashimaY. LiR. O. McGillH. S. MehtaG. A. A. MiessiK. MiyazakiS. H. PelletH. RathbunD. L. RudlandP. J. RushD.-J. ShimA. UdyawarT. V. VoB. WasilukS. X. XuA. Alleshwaram, AlternateM. L. Benson, Alternate

xxxv

Subgroup on Nondestructive Examination (SG-NDE) (BPV XI)

J. C. Spanner, Jr., ChairD. R. Cordes, SecretaryD. AlleyT. L. ChanC. B. CheezemF. E. DohmenD. O. Henry

J. T. LindbergG. A. LofthusG. R. PerkinsS. A. SaboF. J. Schaaf, Jr.R. V. SwainC. J. Wirtz

Working Group on Personnel Qualification and Surface Visual andEddy Current Examination (SG-NDE) (BPV XI)

J. T. Lindberg, ChairJ. E. Aycock, SecretaryS. E. CumblidgeA. DiazN. FarenbaughD. O. Henry

J. W. HoufJ. C. Spanner, Jr.J. T. TimmM. C. WeatherlyM. L. WhytsellC. J. Wirtz

Working Group on Procedure Qualification and VolumetricExamination (SG-NDE) (BPV XI)

G. A. Lofthus, ChairG. R. Perkins, SecretaryM. T. AndersonM. BrileyC. B. CheezemA. D. ChockieD. R. CordesM. DennisS. R. Doctor

F. E. DohmenK. J. HackerD. B. KingD. A. KullC. A. NoveS. A. SaboR. V. SwainS. J. ToddD. K. Zimmerman

Subgroup on Repair/Replacement Activities (SG-RRA) (BPV XI)

E. B. Gerlach, ChairE. V. Farrell, Jr., SecretaryJ. F. BallS. B. BrownR. E. CantrellR. ClowP. D. FisherR. E. GimpleD. R. GrahamR. A. HermannK. J. KarwoskiR. D. Kerr

S. L. McCracken

B. R. Newton

J. E. O'Sullivan

S. Schuessler

R. R. Stevenson

R. W. Swayne

D. L. Tilly

D. E. Waskey

J. G. Weicks

R. A. Yonekawa

E. G. Reichelt, Alternate

Working Group on Welding and Special Repair Processes (SG-RRA)(BPV XI)

D. E. Waskey, ChairD. J. Tilly, SecretaryR. E. CantrellS. J. FindlanP. D. FisherM. L. HallR. A. HermannK. J. Karwoski

C. C. Kim

S. L. McCracken

D. B. Meredith

B. R. Newton

J. E. O'Sullivan

R. E. Smith

J. G. Weicks

Working Group on Nonmetals Repair/Replacement Activities(SG-RRA) (BPV XI)

J. E. O'Sullivan, ChairS. Schuessler, SecretaryM. T. AudrainJ. Johnston, Jr.T. M. Musto

S. PattersonB. B. RajiF. J. Schaaf, Jr.Z. J. Zhou

Task Group on Repair by Carbon Fiber Composites(WGN-MRR) (BPV XI)

J. E. O'Sullivan, ChairJ. W. CollinsM. GollietL. S. GordonT. JimenezG. M. LupiaM. P. Marohl

R. P. OjdrovicD. PegueroA. PridmoreB. B. RajiC. W. RowleyV. RoyJ. Wen

Working Group on Design and Programs (SG-RRA) (BPV XI)

R. Clow, ChairA. B. Meichler, SecretaryO. BhattyS. B. BrownJ. W. CollinsL. R. CorrR. R. CroftE. V. Farrell, Jr.E. B. Gerlach

D. R. Graham

G. F. Harttraft

T. E. Hiss

H. Malikowski

M. A. Pyne

R. R. Stevenson

R. W. Swayne

R. A. Yonekawa

Subgroup on Water-Cooled Systems (SG-WCS) (BPV XI)

S. D. Kulat, ChairN. A. Palm, SecretaryJ. M. AgoldV. L. ArmentroutJ. M. BoughmanS. T. ChesworthA. D. CinsonD. D. DavisH. Q. DoE. L. Farrow

M. J. Ferlisi

P. J. Hennessey

D. W. Lamond

A. McNeill III

T. Nomura

G. C. Park

J. E. Staffiera

H. M. Stephens, Jr.

R. Turner

Task Group on High Strength Nickel Alloys Issues (SG-WCS) (BPV XI)

R. L. Dyle, ChairB. L. Montgomery, SecretaryW. H. BamfordP. R. DonavinR. E. GimpleR. HardiesK. KoyamaM. LashleyH. Malikowski

S. E. Marlette

G. C. Park

J. M. Shuping

J. C. Spanner, Jr.

K. B. Stuckey

E. J. Sullivan, Jr.

B. C. Thomas

D. P. Weakland

Working Group on Containment (SG-WCS) (BPV XI)

J. E. Staffiera, ChairH. M. Stephens, Jr., SecretaryP. S. GhosalH. T. HillR. D. HoughB. LehmanJ. A. Munshi

D. J. Naus

A. A. Reyes-Cruz

E. A. Rodriguez

M. Sircar

S. G. Brown, Alternate

T. J. Herrity, Alternate

xxxvi

Working Group on Inspection of Systems and Components(SG-WCS) (BPV XI)

J. M. Agold, ChairN. Granback, SecretaryR. W. BlydeC. Cueto-FelguerosoR. E. DayH. Q. DoM. J. FerlisiK. W. Hall

K. M. Hoffman

S. D. Kulat

A. Lee

T. Nomura

J. C. Nygaard

R. Rishel

G. J. Navratil, Alternate

Task Group on Optimization of Ultrasonic Evaluation Requirements(WG-ISC) (BPV XI)

M. J. Ferlisi, ChairK. W. HallD. O. HenryK. M. Hoffman

B. L. MontgomeryG. J. NavratilM. OrihuelaJ. C. Poehler

Working Group on Pressure Testing (SG-WCS) (BPV XI)

D. W. Lamond, ChairJ. M. Boughman, SecretaryD. AlleyY.-K. ChungJ. A. Doughty

R. E. HallA. E. KeyserJ. K. McClanahanB. L. MontgomeryS. A. Norman

Task Group on Buried Components Inspection and Testing(WG-PT) (BPV XI)

D. W. Lamond, ChairJ. M. Boughman, SecretaryM. Moenssens, SecretaryC. BlackwelderG. C. CokerR. E. DayR. Hardies

T. Ivy

A. Lee

G. M. Lupia

J. Ossmann

M. A. Richter

D. Smith

Working Group on Risk-Informed Activities (SG-WCS) (BPV XI)

M. A. Pyne, ChairS. T. Chesworth, SecretaryJ. M. AgoldC. Cueto-FelguerosoH. Q. DoR. FougerousseM. R. GraybealR. HaesslerJ. HakiiK. W. Hall

K. M. Hoffman

S. D. Kulat

D. W. Lamond

R. K. Mattu

A. McNeill III

P. J. O’ReganN. A. Palm

D. Vetter

J. C. Younger

Special Working Group on Editing and Review (BPV XI)

R. W. Swayne, ChairC. E. MoyerK. R. Rao

J. E. StaffieraD. J. TillyC. J. Wirtz

Special Working Group on Nuclear Plant Aging Management(BPV XI)

B. R. Snyder, ChairA. B. Meichler, SecretaryT. M. AnselmiS. AsadaD. V. BurgessY.-K. ChungD. D. DavisR. L. Dyle

A. L. Hiser, Jr.R. E. NickellK. SakamotoW. L. ServerR. L. TurnerG. G. YoungZ. ZhongM. Srinivasan, Alternate

Working Group on General Requirements (BPV XI)

R. K. Rhyne, ChairE. J. Maloney, SecretaryJ. F. BallT. L. ChanE. L. Farrow

P. J. HennesseyK. M. HermanR. K. MattuC. E. MoyerR. L. Williams

Special Working Group on Reliability and Integrity ManagementProgram (BPV XI)

F. J. Schaaf, Jr., ChairA. T. Roberts III, SecretaryN. BroomS. R. DoctorJ. FletcherS. R. GosselinN. GranbackJ. GrimmA. B. Hull

D. M. JonesA. L. KrinzmanD. R. LeeR. K. MillerM. N. MitchellR. MorrillT. RoneyR. W. SwayneS. Takaya

JSME/ASME Joint Task Group for System-Based Code (SWG-RIM)(BPV XI)

T. Asayama, ChairK. DozakiM. R. GraybealM. HayashiY. Kamishima

H. MachidaM. MorishitaF. J. Schaaf, Jr.S. TakayaD. Watanabe

COMMITTEE ON TRANSPORT TANKS (BPV XII)

M. D. Rana, ChairN. J. Paulick, Vice ChairT. Schellens, Staff SecretaryA. N. AntoniouP. ChilukuriW. L. GarfieldG. G. KarcherM. Pitts

T. A. RogersS. StaniszewskiA. P. VargheseM. R. WardJ. A. Byers, Contributing MemberR. Meyers, Contributing MemberM. D. Pham, Contributing MemberA. Selz, Contributing Member

Subgroup on Design and Materials (BPV XII)

A. P. Varghese, ChairR. C. Sallash, SecretaryD. K. ChandiramaniP. ChilukuriG. G. KarcherS. L. McWilliamsN. J. PaulickM. D. Rana

T. A. Rogers

A. Selz

M. R. Ward

K. Xu

J. Zheng, Corresponding Member

T. Hitchcock, Contributing Member

M. D. Pham, Contributing Member

xxxvii

Subgroup on Fabrication, Inspection, and Continued Service(BPV XII)

M. Pitts, ChairP. Chilukuri, SecretaryW. L. GarfieldD. HayworthK. ManskerG. McRaeO. MuletT. A. RogersM. Rudek

R. C. SallashS. StaniszewskiS. E. Benet, Contributing MemberJ. A. Byers, Contributing MemberA. S. Olivares, ContributingMember

L. H. Strouse, Contributing MemberS. V. Voorhees, ContributingMember

Subgroup on General Requirements (BPV XII)

S. Staniszewski, ChairA. N. AntoniouJ. L. FreilerW. L. GarfieldO. MuletB. Pittel

M. Pitts

T. Rummel

R. C. Sallash

K. L. Gilmore, Contributing Member

L. H. Strouse, Contributing Member

Subgroup on Nonmandatory Appendices (BPV XII)

N. J. Paulick, ChairS. Staniszewski, SecretaryP. ChilukuriD. HayworthK. ManskerS. L. McWilliamsM. PittsT. A. RogersR. C. SallashD. G. Shelton

M. R. WardS. E. Benet, Contributing MemberD. D. Brusewitz, ContributingMember

J. L. Conley, Contributing MemberT. Eubanks, Contributing MemberT. Hitchcock, Contributing MemberA. Selz, Contributing MemberA. P. Varghese, ContributingMember

COMMITTEE ON BOILER AND PRESSURE VESSEL CONFORMITYASSESSMENT (CBPVCA)

P. D. Edwards, ChairL. E. McDonald, Vice ChairK. I. Baron, Staff SecretaryM. Vazquez, Staff SecretaryS. W. CameronJ. P. ChicoineD. C. CookM. A. DeVriesT. E. HansenK. T. LauD. MillerB. R. MorelockJ. D. O'LearyG. ScribnerB. C. TurczynskiD. E. TuttleE. A. WhittleR. V. WielgoszinskiP. Williams

D. Cheetham, Contributing MemberV. Bogosian, AlternateJ. B. Carr, AlternateJ. W. Dickson, AlternateM. B. Doherty, AlternateJ. M. Downs, AlternateB. J. Hackett, AlternateB. L. Krasiun, AlternateP. F. Martin, AlternateK. McPhie, AlternateM. R. Minick, AlternateI. Powell, AlternateR. Pulliam, AlternateR. Rockwood, AlternateR. D. Troutt, AlternateR. Uebel, AlternateJ. A. West, AlternateD. A. Wright, AlternateA. J. Spencer, Honorary Member

COMMITTEE ON NUCLEAR CERTIFICATION (CNC)

R. R. Stevenson, ChairJ. DeKleine, Vice ChairE. Suarez, Staff SecretaryG. GobbiS. M. GoodwinJ. W. HighlandsK. A. HuberJ. C. KraneM. A. LockwoodR. P. McIntyreM. R. MinickL. M. PlanteH. B. PrasseT. E. QuakaC. T. SmithD. M. VickeryC. S. Withers

S. YangS. F. Harrison, ContributingMember

S. Andrews, AlternateV. Bogosian, AlternateP. J. Coco, AlternateP. D. Edwards, AlternateD. P. Gobbi, AlternateK. M. Hottle, AlternateK. A. Kavanagh, AlternateB. G. Kovarik, AlternateM. A. Martin, AlternateM. Paris, AlternateA. Torosyan, AlternateE. A. Whittle, AlternateH. L. Wiger, Alternate

Subcommittee on Safety Valve Requirements (SC-SVR)

D. B. DeMichael, ChairJ. F. Ball, Vice ChairC. E. O’Brien, Staff SecretaryJ. BurgessS. CammeresiJ. A. CoxR. J. DoellingJ. P. Glaspie

S. F. Harrison, Jr.W. F. HartD. MillerB. K. NutterT. PatelZ. WangJ. A. WestR. D. Danzy, Contributing Member

Subgroup on Design (SC-SVR)

D. Miller, ChairC. E. BeairJ. A. ConleyR. J. Doelling

T. PatelJ. A. WestR. D. Danzy, Contributing Member

Subgroup on General Requirements (SC-SVR)

J. F. Ball, ChairG. BrazierJ. BurgessD. B. DeMichael

S. T. FrenchJ. P. GlaspieB. PittelD. E. Tuttle

Subgroup on Testing (SC-SVR)

J. A. Cox, ChairT. BeirneJ. E. BrittS. CammeresiJ. W. DicksonG. D. Goodson

W. F. Hart

B. K. Nutter

C. Sharpe

Z. Wang

A. Wilson

U.S. Technical Advisory Group ISO/TC 185 Safety Relief Valves

T. J. Bevilacqua, ChairC. E. O’Brien, Staff SecretaryJ. F. BallG. Brazier

D. B. DeMichaelD. MillerB. K. NutterJ. A. West

xxxviii

ð15Þ

ð15Þ

INTRODUCTION

Section III appendices are referred to as either Section III Appendices or Subsection Appendices. These appendices arefurther designated as either mandatory or nonmandatory for use. Mandatory Appendices are referred to in the SectionIII rules and contain requirements that must be followed in construction. Nonmandatory Appendices provide additionalinformation or guidance when using Section III.

Section III Appendices are contained in this book. These appendices have the potential for multiple subsection applic-ability. Mandatory Appendices are designated by a Roman numeral followed, when appropriate, by Arabic numerals toindicate the various articles, subarticles, and paragraphs of the appendix, such as II-1500 or XIII-2131. NonmandatoryAppendices are designated by a capital letter followed, when appropriate, by Arabic numerals to indicate various arti-cles, subarticles, and paragraphs of the appendix, such as D-1200 or Y-2410.

Subsection Appendices are specifically applicable to one subsection and are contained within that subsection.Subsection-specific Mandatory and Nonmandatory Appendices are numbered in the same manner as Section III Appen-dices but with a subsection identifier (e.g., NF, D2, HBB, etc.) preceding either the Roman numeral or the capital letter fora unique designation. For example, NF-II-1100 or NF-A-1200 would be a part of Subsection NF Mandatory AppendixNF-II or Nonmandatory Appendix NF-A, respectively. For Subsection CC, D2-IV-1120 or D2-D-1330 would be a partof Subsection CC Mandatory Appendix D2-IV or Nonmandatory Appendix D2-D, respectively.

A Reference Table (Table 1) has been developed for Section III Appendices to provide additional guidance on appendixusage for the Code user. This Reference Table, reflecting down to a Subsection level, does not take precedence over Coderules.

TABLE 1SECTION III APPENDICES REFERENCE TABLE

AppendixIdentifier

Sub.

Division 1Div.2 Division 3 Division 5

Subsections Sub. Subsections Subsections

NCA NB NC ND NE NF NG CC WA WB WC

HA HB HC HF HG HH

Sub-partA

Sub-partB

Sub-partA

Sub-partB (1)

Sub-partA

Sub-partB (1)

Sub-partA

Sub-partA

Sub-partB (1)

Sub-partA

MANDATORY APPENDICES

I X X X X X (3) (3) (3) (3) X

II X X X X X X X (3) X (3) (3) (3) X

III X X X X X (3) (3) (3) (3)

IV X (3) (3) (3) (3)

V X (2) (2) (2) (2) (2) (2) X (2) X (3) (2) (3) (2) (3) (3) (2) (4)

VI X X X X X X X X (3) (5) (3) (3) (3)

VII Not in use

VIII Not in use

IX Not in use

X Not in use

XI X X X X X (3) (3) (3) (3)

XII (3) (3) (3) (3)

XIII X X X (3) (3) (3) (3)

XIV X X (3) (3) (3) (3)

xxxix

TABLE 1SECTION III APPENDICES REFERENCE TABLE (CONT'D)

AppendixIdentifier

Sub.

Division 1Div.2 Division 3 Division 5

Subsections Sub. Subsections Subsections

NCA NB NC ND NE NF NG CC WA WB WC

HA HB HC HF HG HH

Sub-partA

Sub-partB

Sub-partA

Sub-partB (1)

Sub-partA

Sub-partB (1)

Sub-partA

Sub-partA

Sub-partB (1)

Sub-partA

MANDATORY APPENDICES

XV Not in use

XVI Not in use

XVII Not in use

XVIII X X X X (3) (3) (3) (3)

XIX X X (3) (3) (3) (3)

XX Not in use

XXI X (2) (2) (2) (2) (2) (2) (2) (2) (3) (2) (3) (2) (3) (3) (2)

XXII X (3) (3) (3) (3)

XXIII X X X X X (2) (2) (2) X (2) X (3) (5) (3) (2) (3) (3) (2) (4)

XXIV X (3) (3) (3) (3)

XXV

NONMANDATORY APPENDICES

A X X X X X X X X (3) X (3) (3) (3) X

B X (2) (2) (2) (2) (2) (2) (2) (2) (2) X (3) (2) (3) (2) (3) (3) (2) (4)

C X (2) X (2) (2) (2) (2) (2) (2) X (2) X (3) (2) (3) (2) (3) (3) (2) (4)

D X X X X X X (5) X X (3) (5) (3) (3) (3)

E X X X (3) X (3) (3) (3)

F X X X X X X X X X (3) X (3) (3) (3) X

G X X X (2) X X X X (2) X X (2) (3) X (3) (2) (3) (3) X

H Not in use

I Not in use

J Not in use

K Not in use

L X X (3) (3) (3) (3)

M (3) (3) (3) (3)

N (3) (3) (3) (3)

O (3) (3) (3) (3)

P (3) (3) (3) (3)

Q (3) (3) (3) (3)

R X X X (3) (3) (3) (3)

S X X X (3) (3) (3) (3)

T X (3) (3) (3) (3)

U (3) (3) (3) (3)

V Not in use

W X (2) (2) (2) (2) (2) (2) (2) (2) (2) (3) (2) (3) (2) (3) (3) (2)

X Not in use

Y X X X (3) (3) (3) (3)

Z (3) (3) (3) (3)

AA X (2) (2) (2) (2) (2) (2) (2) (2) (2) X (3) (2) (3) (2) (3) (3) (2) (4)

BB X X (3) (3) (3) (3)

xl

TABLE 1SECTION III APPENDICES REFERENCE TABLE (CONT'D)

NONMANDATORY APPENDICES

CC X (2) (2) (3) (3) (3) (3)

DD X (2) (2) (3) (3) (3) (3)

EE

FF X X

GENERAL NOTE: This reference table is not intended to provide specific Code requirements. It provides general guidance only. Mandatoryand Nonmandatory Appendices marked with an ‘X’ in the table are specifically referred to in the identified Subsection rules. Section III Man-datory Appendices are not to be interpreted as being a requirement for all Section III Subsections. However, certain Mandatory or Nonman-datory Section III Appendices may be appropriate for use in other subsections as long as the respective subsection rules are satisfied.Sub. = SubsectionDiv. = Division

NOTES:(1) Subpart B for Subsections HB, HC, and HG contain provisions for the use of all or portions of the rules in Division 1, Subsections NB, NC,

and NG, respectively, if creep effects are negligible. In those circumstances, the reference to the Appendices is governed by the referencedefined for those respective subsections of Division 1.

(2) The Appendix reference determined by Subsection NCA (or, for Division 5, via Subsection HA, Subpart A referencing Subsection NCA)shall apply.

(3) The Appendix reference determined by the referenced Division 1 Subsection shall apply.(4) The Appendix reference determined by Subsection HA, Subpart B shall apply.(5) The Appendix reference determined by Subsection NB shall apply.

xli

ð15Þ ORGANIZATION OF SECTION III

1 GENERAL

Section III consists of Division 1, Division 2, Division 3, and Division 5. These Divisions are broken down into Subsec-tions and are designated by capital letters preceded by the letter “N” for Division 1, by the letter “C” for Division 2, by theletter “W” for Division 3, and by the letter “H” for Division 5. Each Subsection is published separately, with the exceptionof those listed for Divisions 2, 3, and 5.• Subsection NCA — General Requirements for Division 1 and Division 2• Appendices• Division 1

– Subsection NB — Class 1 Components– Subsection NC — Class 2 Components– Subsection ND — Class 3 Components– Subsection NE — Class MC Components– Subsection NF — Supports– Subsection NG — Core Support Structures– Subsection NH — Class 1 Components in Elevated Temperature Service*

• Division 2 — Code for Concrete Containments– Subsection CC — Concrete Containments

• Division 3 — Containments for Transportation and Storage of Spent Nuclear Fuel and High Level Radioactive Materialand Waste– Subsection WA — General Requirements for Division 3– Subsection WB — Class TC Transportation Containments– Subsection WC — Class SC Storage Containments

• Division 5 — High Temperature Reactors– Subsection HA — General Requirements

Subpart A — Metallic MaterialsSubpart B — Graphite MaterialsSubpart C — Composite Materials

– Subsection HB — Class A Metallic Pressure Boundary ComponentsSubpart A — Low Temperature ServiceSubpart B — Elevated Temperature Service

– Subsection HC — Class B Metallic Pressure Boundary ComponentsSubpart A — Low Temperature ServiceSubpart B — Elevated Temperature Service

– Subsection HF — Class A and B Metallic SupportsSubpart A — Low Temperature Service

– Subsection HG — Class A Metallic Core Support StructuresSubpart A — Low Temperature ServiceSubpart B — Elevated Temperature Service

– Subsection HH — Class A Nonmetallic Core Support StructuresSubpart A — Graphite MaterialsSubpart B — Composite Materials

2 SUBSECTIONS

Subsections are divided into Articles, subarticles, paragraphs, and, where necessary, subparagraphs andsubsubparagraphs.

* The 2015 Edition of Section III is the last edition in which Section III, Division 1, Subsection NH, Class 1 Components in Elevated TemperatureService, will be published. The requirements located within Subsection NH have been moved to Section III, Division 5, Subsection HB, Subpart Bfor the elevated temperature construction of Class A components.

xlii

rules for construction of nuclear facility … 2015/asme bpvc-iii...appendices asme bpvc.iii.a-2015...

Documents