run-out measuring instruments - igel cmmsliding prism art. no. 541120 sliding prism, adjustable art....

2
Measuring elements Suitable for: » Concentricity and coaxiality » Radial and axial run-out » Total run-out » Diameter comparison testing » Optical measurements » Mounting station for roughness depth measurement RUN-OUT MEASURING INSTRUMENTS

Upload: others

Post on 10-Mar-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RUN-OUT MEASURING INSTRUMENTS - IGEL CMMSliding prism Art. no. 541120 Sliding prism, adjustable Art. no. 541130 Overview of range Combinations Field of application: Thanks to its robust

Measuring elements

Suitable for:

» Concentricity and coaxiality» Radial and axial run-out » Total run-out » Diameter comparison testing » Optical measurements » Mounting station for roughness depth measurement

RUN-OUT MEASURING INSTRUMENTS

Page 2: RUN-OUT MEASURING INSTRUMENTS - IGEL CMMSliding prism Art. no. 541120 Sliding prism, adjustable Art. no. 541130 Overview of range Combinations Field of application: Thanks to its robust

Sliding prism Art. no. 541120

Sliding prism, adjustable Art. no. 541130

Overview of range Combinations

Field of application:

Thanks to its robust construction, radial run-out testing equipment can be used in the measuring room as well as in production. The testing equipment can be fitted with dial gauges or electronic measuring probes.

Technical description:

The prismatic supports consist of carbide rods. Using the integrated positioning device, the stop unit can be precisely and quickly adjusted to the centre point of the workpiece. The handwheel enables the workpiece to be turned very slowly. The contact pressure of the friction wheel can be regulated using a sliding weight. The structural elements are designed in such a way that they can be flexibly combined with each other.

Support diameter: 1 – 32 mm, support length 10 – 220 mm, dimensions 300 mm x 120 mm x 200 mm

Radial run-out testing equip-ment with prism mounting

» Workpiece length 220 mm » Workpiece diameter 32 mm

Art. no. 540010

Self-adjusting stop unit block with prism Art. no. 541110

Spring-loaded point mountingArt. no. 541170

Centring insert (optional) Art. no. 541190

Dial gauge stand Art. no. 541140

Dial gauge holderArt. no. 541240

108° prism, adjustable Art. no. 541220

108° stop unit D50Art. no. 541230

Radial run-out testing equip-ment with adjustable prism mounting

» Workpiece length 220 mm » Workpiece diameter 32 mm

Art. no. 540020

Radial run-out testing equip-ment with mounting between points

» Point width 180 mm » Point height 100 mm » Max. workpiece weight 3 kg

Art. no. 540030

Measuring station for testing tapers, radial run-out and dimensions

» Workpiece length 300 mm » Workpiece diameter 50 mm

Art. no. 540040

Measuring station for testing radial run-out, roundness and constant thickness

» Workpiece length 300 mm » Workpiece diameter 50 mm

Art. no. 540050

Stop unit block with prismArt. no. 541200

Sliding prismArt. no. 541210

Clamping piece (pair)Art. no. 541250

Base plateArt. no. 541100

Positioning footArt. no. 541260

Rigid point mountingArt. no. 541180

Drive block Art. no. 541150

Stand Art. no. 541160

dk Fixiersysteme GmbH & Co. KGFerdinand-Lassalle-Straße 3572770 Reutlingen, Germany

Tel. +49 (0) 7121 90 97 10Fax +49 (0) 7121 90 97 [email protected]