rust veto as

Upload: qazim786

Post on 09-Mar-2016

17 views

Category:

Documents


0 download

DESCRIPTION

Rust Veto AS is a grease-type rust preventive containing high quality corrosion inhibitors and formulated for use in extremes of climatic conditions. It may be applied readily by stiff brush at -30°C but when in place it sets to a soft greasy film which will not melt or run off at temperatures up to 120°C. Rust Veto AS was particularly designed for the long-term protection of threads on offshore tubular goods, stored in hostile outdoor environments.Rust Veto AS is designed specifically for long-term protection of drill pipe and capped casing threads, especially in offshore tubular products. It protects metal against corrosion for up to 12 months during outdoor storage in extreme climate conditions. Indoors, it provides protection for two years or more. Rust Veto can be removed easily when required, and it does not interfere with subsequent manufacturing processes.

TRANSCRIPT

  • Revision Date: 21-Nov-2011 Version 2Issuing Date: 21-Nov-2011

    MATERIAL SAFETY DATA SHEET

    E-mail Address [email protected]

    2.2. Label Elements

    1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THECOMPANY/UNDERTAKING

    1.4. Emergency telephone number

    Symbol(s) Not dangerous

    Uses advised against Any other purpose.

    1.1. Product identifier

    Emergency telephone +44 (0) 161 874 5000 (9 - 5)

    R-phrase(s) None

    Product Code(s)

    1.2. Relevant identified uses of the substance or mixture and uses advised against

    S-phrase(s) None

    1.3. Details of the supplier of the safety data sheet

    2. HAZARDS IDENTIFICATION

    67817

    2.1. Classification of the substance or mixture

    _____________________________________________________________________________________________

    Product Name

    Recommended use

    According to present data no classification and labelling is required according to Directives 67/548/EEC or 1999/45/EC.

    Rust preventative, Use as Directed.

    Page 1 / 8

    Rust-Veto AS

    Manufacturer, Importer, Supplier Houghton plcBeacon RoadTrafford ParkManchesterM17 1AFTel: +44 (0)161 874 5000

    mmk2vnText BoxRust Veto ASRust Veto AS is a grease-type rust preventive containing high quality corrosion inhibitors and formulated for use in extremes of climatic conditions. It may be applied readily by stiff brush at -30C but when in place it sets to a soft greasy film which will not melt or run off at temperatures up to 120C. Rust Veto AS was particularly designed for the long-term protection of threads on offshore tubular goods, stored in hostile outdoor environments.Rust Veto AS is designed specifically for long-term protection of drill pipe and capped casing threads, especially in offshore tubular products. It protects metal against corrosion for up to 12 months during outdoor storage in extreme climate conditions. Indoors, it provides protection for two years or more. Rust Veto can be removed easily when required, and it does not interfere with subsequent manufacturing processes.

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    Ingestion

    5. FIRE-FIGHTING MEASURES

    Clean mouth with water and afterwards drink plenty of water. Do not induce vomitingwithout medical advice.

    5.1. Extinguishing media

    2.3. Other hazards None

    Inhalation Move to fresh air.

    Suitable Extinguishing Media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment: Water spray, drychemical, carbon dioxide (CO2), or foam

    Protection of First-aiders Use personal protective equipment

    4.1. Description of first-aid measures

    Extinguishing media which shall not be used for safety reasons None

    4.2. Most important symptoms and effects, both acute and delayed

    5.2. Special hazards arising from the substance or mixture

    Skin contact Wash off immediately with soap and plenty of water, Wash contaminated clothing beforereuse.

    Special Hazard Thermal decomposition can lead to release of irritating gases and vapors.

    Main Symptoms None

    4. FIRST AID MEASURES

    General advice

    4.3. Indication of immediate medical attention and special treatment needed

    Eye contact Rinse thoroughly with water as necessary; Keep eye wide open while rinsing.

    If symptoms persist, call a physician.

    Notes to physician Treat symptomatically

    Non-hazardous ingredients

    _____________________________________________________________________________________________

    For the full text of the R-phrases mentioned in this Section, see Section 16

    3.2. Mixtures

    Page 2 / 8

    3. COMPOSITION/INFORMATION ON INGREDIENTS

    For the full text of the H-Statements mentioned in this Section, see Section 16.

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    Incompatible Materials Strong oxidizing agents, Strong acids, Strong bases

    6.4. Reference to other sections

    7.3. Specific end uses

    6. ACCIDENTAL RELEASE MEASURES

    See Section 8/12/13 for additional information

    6.2. Environmental precautions

    Specific use(s) Rust preventative, Use as Directed.

    Ensure adequate ventilation

    5.3. Advice for fire-fighters

    8. EXPOSURE CONTROLS/PERSONAL PROTECTION

    7. HANDLING AND STORAGE

    Special protective equipment for fire-fighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and fullprotective gear

    8.1. Control parameters

    Prevent further leakage or spillage if safe to do so

    7.1. Precautions for safe handling

    Contains no substances with occupational exposure limit values

    Advice for non-emergencypersonnel

    Material can create slippery conditions

    Ensure adequate ventilation. Do not eat, drink or smoke when using this product.

    6.3. Methods and materials for containment and cleaning up

    Hazardous Decomposition Products Incomplete combustion and thermolysis produces potentially toxic gases such as carbon monoxide and carbon dioxide.

    7.2. Conditions for safe storage, including any incompatibilities

    _____________________________________________________________________________________________

    6.1. Personal precautions, protective equipment and emergency procedures

    Sweep up and shovel into suitable containers for disposal.

    Technical measures/Storage conditions Keep container tightly closed in a dry and well-ventilated place

    Advice for emergency responders

    Page 3 / 8

    For personal protection see section 8

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    Skin and body protection Long sleeved clothingRespiratory protection No special protective equipment required In case of mist, spray or aerosol exposure wear

    suitable personal respiratory protection and protective suit

    Engineering Measures Ensure adequate ventilation, especially in confined areas

    Predicted No Effect Concentration(PNEC)

    Hygiene measures Handle in accordance with good industrial hygiene and safety practice.

    No information available

    Derived No Effect Level (DNEL)

    Environmental Exposure Controls No special environmental precautions required

    Personal protective equipment

    Thermal hazards None under normal use conditions

    No information available

    Eye Protection

    9. PHYSICAL AND CHEMICAL PROPERTIES

    Explosive properties Not applicable

    Tightly fitting safety goggles

    Oxidizing Properties Not applicable

    Other information

    8.2. Exposure controls

    Hand Protection Protective gloves. Barrier cream. Please observe the instructions regarding permeabilityand breakthrough time which are provided by the supplier of the gloves. Also take intoconsideration the specific local conditions under which the product is used, such as thedanger of cuts, abrasion.

    Not applicable

    Property

    Melting/freezing point

    negligible

    negligible

    No information available

    Autoignition temperature

    Vapor density

    Odor

    pH

    No information available

    No information available

    Flammability (solid, gas)

    Flash Point

    > 150 C

    Decomposition temperature

    lower flammability limit

    Mild

    Relative density

    No information available

    No information available

    Physical state @20C Paste/Gel

    No information available

    0.90

    > 200 C

    Viscosity (kinematic)

    @15.5C

    No information available.

    ValuesNot applicable .

    Water Solubility

    Cleveland Open Cup (COC)

    Flammability Limits in Air

    Immiscible in water

    Appearance

    Boiling point/boiling range

    brown

    Solubility in other solvents

    Evaporation rate

    No information available

    Odor Threshold

    _____________________________________________________________________________________________

    Note

    Vapor pressure

    > 300 C

    No information available

    Partition coefficient: n-octanol/water

    Not applicable

    Page 4 / 8

    .

    upper flammability limit

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    Ingestion None known; LD50>2000 mg/kg (rat)

    Incomplete combustion and thermolysis produces potentially toxic gases such as carbon monoxide and carbon dioxide.

    None under normal use conditions

    No information available

    Acute toxicity - Product Information

    11. TOXICOLOGICAL INFORMATION

    Do not freeze

    10. STABILITY AND REACTIVITY

    Product does not present an acute toxicity hazard based on known or supplied information.

    11.1. Information on toxicological effects

    10.3. Possibility of hazardous reactions

    10.1. Reactivity

    10.5. Incompatible Materials

    Acute toxicity - Component Information

    Product Information - Principle Routes of Exposure

    Non-hazardous ingredients

    10.2. Chemical stability

    VOC Content

    Inhalation No known hazard by inhalation; LC50>5mg/l/4h (rat)

    Strong oxidizing agents, Strong acids, Strong bases

    None under normal use conditions

    Irritation May cause irritation.

    Eye contact None known

    _____________________________________________________________________________________________

    10.6. Hazardous decomposition products

    Skin contact No known hazard in contact with skin; LD50>2000 mg/kg (rat)

    Page 5 / 8

    10.4. Conditions to avoid

    Stable under normal conditions

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    Sensitization

    No information available

    12.2. Persistence and degradability

    12.6. Other adverse effects

    Repeated Dose Toxicity None known

    None known

    Not readily biodegradable.

    Mutagenicity None known

    13. DISPOSAL CONSIDERATIONS

    12. ECOLOGICAL INFORMATION

    None known

    12.3. Bioaccumulative potential

    13.1. Waste treatment methods

    Waste from Residues / UnusedProducts

    Dispose of in accordance with local regulations

    Product has a low potential to bioconcentrate

    12.1. Toxicity

    Special risks and unsuitable meanswhen handling product waste/wastepackaging

    None

    Corrosivity

    Toxicity to Reproduction

    Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling ordisposal

    None known

    12.4. Mobility in soil

    Ecotoxicity effects

    _____________________________________________________________________________________________

    Contains no substances known to be hazardous to the environment or that are notdegradable in waste water treatment plants

    Carcinogenicity

    The product is insoluble and floats on water

    Page 6 / 8

    None known

    None.

    12.5. Results of PBT and vPvB assessment

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    ADR/RID Not regulated

    14.5. Environmental Hazards

    Not regulated

    ICAO/IATA Not regulated

    14.3. Transport hazard class

    None

    According to the European Waste Catalogue, Waste Codes are not product specific, butapplication specific. Waste codes should be assigned by the user based on the applicationfor which the product was used.

    15. REGULATORY INFORMATION

    14.6. Special precautions for users

    15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

    Not regulated

    14.1. UN-Number

    Take note of Directive 2000/39/EC establishing a first list of indicative occupational exposure limit values

    14.2. UN proper shipping name

    None

    Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemicalagents at work

    14. TRANSPORT INFORMATION

    14.4. Packing group

    Take note of Dir 94/33/EC on the protection of young people at work.

    14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code

    Other information

    _____________________________________________________________________________________________

    Not applicable

    Not regulated

    Not regulated

    Page 7 / 8

    IMDG/IMO Not regulated

  • _____________________________________________________________________________________________67817 - Rust-Veto AS Revision Date: 21-Nov-2011

    Exposure scenario No information available

    Disclaimer The information provided on this SDS is correct to the best of our knowledge, information and belief at the date of itspublication. The information given is designed only as a guide for safe handling, use, processing, storage,transportation, disposal and release and is not to be considered as a warranty or quality specification. The informationrelates only to the specific material designated and may not be valid for such material used in combination with any othermaterial or in any process, unless specified in the text.

    16. OTHER INFORMATION

    This safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 & (EC) No. 1272/2008 & (EC) 1999/45. Acts of Parliament: The Health and Safety at Work etc. Act 1974. Environment Protection Act 1990Statutory Instruments: Control of Substances Hazardous to Health Regulations 2002. Chemicals (Hazard Information andPackaging) Regulations 2009The Carriage of Dangerous Goods Regulations 2009The Hazardous Waste (England and Wales) Regulations 2005Workplace exposure limits (EH40)The classification detailed on this Safety Data Sheet refer to the neat material only. Dilution of the product may reduce theclassification

    Issuing Date: 21-Nov-2011

    _____________________________________________________________________________________________

    No information available

    Revision Date: 21-Nov-2011

    Full text of R-phrases referred to under sections 2 and 3 No information available

    15.2. Chemical Safety Assessment

    Page 8 / 8

    Full text of H-Statements referred to under section 2 and 3 No information available

    Revision Note Not applicable