page �

s t o r a g e & i n s t a l l a t i o n o f y o u r m a r b l e t o p

2. Opening crate

�. Before unpacking make sure you have installation requirements present:

�. A professional two man crew

2.Sinkbaseinstalledaccordingtoinstructionswithplumbwallandfloor.

3. Ensure the marble top is the correct one for the base.

4. Tools and materials required:

�. Flat, non-abrasive work surface, such as a blanket or smooth cardboard

2. Carpenter’s level

3. Phillips head screwdriver

4. Sealant

2. Carefully, without allowing any free fall,

rotatethecratefromverticaltoflat.

This is the only time the crate should be horizontal.

�. Storage

�. Keep marble top in it’s crate until installation.

2. Store crate vertically in a place safe from being hit or knocked over

3. Do not stack anything on top of the crate.

page 2

s t o r a g e & i n s t a l l a t i o n o f y o u r m a r b l e t o p

3. Remove metal bands

4. Unscrew the slats or lid and remove.

3. Examination of marble top

�. Examine the marble top for cracks or defects.

2. If defects are detected, please call 877-777-7059, do not install.

3. To clean the marble top, wipe with a soft cloth.

4. Installation of marble top

�. Always use a two man crew, a single person crew is much more likley to break or chip the marble top.

Double tops might require a 3 man crew.

page 3

s t o r a g e & i n s t a l l a t i o n o f y o u r m a r b l e t o p

2.SpecificInstructionsforinstallationbetweentwowalls

�. Set top on it’s edge at back of counter.

2. Lower the front of the marble top to the sink base, making sure both ends come down at the same rate. 3. Do not shimmie, twist or turn the top as you lower it. - risk of breakage!

If defects are detected please call 877-777-7059 - do not install.

Caution! Installation between two walls requires special care.

page �

w e a t h e r e d o a k s i n g l e w a s h s t a n d s i n k a s s e m b l y i n s t r u c t i o n s

before you begin:

Professional installation by two-person crew is required for this fixture. Install water supply and drain piping according to local plumbing and building codes. Insure that wall and floor are square and plumb at site of installation.

tools and materials required:

�. Flat, nonabrasive work surface such as a blanket or smooth cardboard2. Sealant3. Phillips head screwdriver

ASSEMBLED SINK

page 2

w e a t h e r e d o a k s i n g l e w a s h s t a n d s i n k a s s e m b l y i n s t r u c t i o n s

Parts list

Stone top (sold separately)

Backsplash (sold separately)

Lavatory basin

Washstand base

A.

B.

C.

D.

page 3

w e a t h e r e d o a k s i n g l e w a s h s t a n d s i n k a s s e m b l y i n s t r u c t i o n s

�.

assembly instructions:

Place the basin (C) on the support bars of washstand (D). (See Illustration) Overflow of Lavatory basin should be on the same side as pre-drilled faucet holes on the stone top.

2. Note removable insert in middle shelf. If p-trap installation requires, the insert can be removed so shelf does not interfere with waste line. Remove four screws to take out the insert.

page �

w e a t h e r e d o a k s i n g l e w a s h s t a n d s i n k a s s e m b l y i n s t r u c t i o n s

cleaning and maintenance instructions:

Avoid abrasive and harsh chemical cleaners.

To maintain and protect luster of vanity sink components, Restoration Hardware Bathroom Cleaning Products are recommended.

Restoration Hardware natural stone tops have a honed finish and hand-polished edges. They are sealed twice before shipment with inert silicone sealant. For cleaning and maintenance, Restoration Hardware Stone Care Products are recommended. To maintain your natural stone top, reseal it once a year.

3.

�.

5.

Apply a continuous bead of sealant to the top surface of rim of lavatory basin where it will contact underside of stone top.

Using two people, lift stone top (A), carefully place it in position on top of washstand base.

Apply silicone sealant to bottom and back of backsplash (B) and attach to wall and marble top.

24

SID

EV

IEW

323

16

36

34

107

8

FR

ON

TV

IEW

113

8

34

Ø 1

14

36

24

TO

PV

IEW

84

18

36

34

BA

CK

VIE

W

323

16

WEA

TH

ERED O

AK

36” VA

NIT

YD

RAW

ING

S REPRESENT

ORIG

INA

L DESIG

N SPEC

IFICA

TIO

NS. A

CT

UA

L PROD

UC

T D

IMEN

SION

S MY

VA

RY SLIG

HT

LY.A

LL DIM

ENSIO

NS A

RE REPRESENT

ED IN

INC

HES.

PROFESSIO

NA

L INSTA

LLAT

ION

REQU

IREDU

nless otherwise noted, all design and content, im

ages, artwork, graphics, photography, text, and the like are copyrights, tradem

arks, trade dress, and/or intellectual property that are owned, controlled, or licensed by Restoration H

ardware.

12

1316

13

14

24

10

316

15

1316

43

8R

EF

10

34

Ø1

14

36

3

84

18

35

716

4

Hu

tton

Sing

leN

ote: Sto

ne is 1 1/4” th

ick.

HU

TTO

N SIN

GLE SIN

K TO

P

HU

TTO

N 17" BA

SIN