s tr o n g ¥ r e l ia b l e ¥ c o s t e f f e c tiv...
TRANSCRIPT
www.vikingchains.com
STRONG • RELIABLE • COST EFFECTIVE
e n v i r o d i v i s i o n
DELTA, BC VANIER, PQ VANCOUVER, WA ACWORTH, GA
Four convenient locations to better serve you
VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500PAGE 2
VC720S NON-METALLIC CHAIN
e n v i r o d i v i s i o n
VC720NM CHAIN
CHAIN SPECIFICATION:
Non-Metallic Collector Chain
t 6.00" Pitch
t Glass Filled Nylon Material
t 3,100 lb. Working Load
t 7,500 lb. Average Ultimate Strength
t 1.5 lbs Per Foot
t Steel Reinforced Pin
ATTACHMENTS AVAILABLE:F226 and F228
APPLICATIONS:Collector chain for primary andsecondary clarifiers.
BENEFITS:VC720S Non-Metallic Chain is lightweight and designed for easy installation. No special tools are requiredfor chain assembly. Chain is compatible with other chain manufacturer’s non-metallic sprockets andcomponents.
www.vikingchains.com
VC720S NON-METALLIC CHAIN
www.vikingchains.com
PAGE 3
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
Dimensions, Weight and Strength of VC720S Non-Metallic Chain
VC720S NON-METALLIC/F228
VC720S NON-METALLIC/F226
Additional equipment availablefor rectangular clarifiers, barscreens and grit collectors;
t Other Chain and Attachments
t Drive Chain
t Sprockets
t Bearings
t Flights
t Filler Blocks
tWear Materials
t Hardware
Chain Part No. Pitch Weight Working Load Barrel Diameter Pin Diameter(inches) (lbs.) (lbs./ft.) (inches) (inches)
VC720S 6.00 1.5 3,100 1.465 .875
Chain Part No. A B C D E F G H Hole Dia.
VC720S / NM/F226 2.00 6.125 4.625 2.715 2.63 0.33 5.50 3.75 .438
Chain Part No. A B C D E F G H Hole Dia.
VC720S / NM/F228 2.00 8.25 6.75 2.715 4.50 0.33 5.50 3.75 .438
e n v i r o d i v i s i o n
VC/NH78 NON-METALLIC CHAIN
www.vikingchains.com
PAGE 4VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
VC/NH78 CHAIN
CHAIN SPECIFICATION:
Non-Metallic Drive Chain
t Glass filled Nylon material
t 2.609" Pitch
t 304SS pin c/w 304SS clips
tMaximum working load 1,800 lbs
t 5,000 lbs Average Ultimate Strength
APPLICATIONS:Drive chain for wastewatertreatment applications.
BENEFITS:VC/NH78 chain is designed to run in both directions. Excellent performance in applications requiring highwearability and chain strength.
VC/NH78 NON-METALLIC CHAIN
www.vikingchains.com
PAGE 5
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
Chain Part No. Weight Maximum Permissible Backflex Radius(lbs./ft.) Tensile Force (lbs.) (inches)
VC/NH78 1.41 1800 3
Dimensions, Weight and Strength of VC/NH78 Non-Metallic Chain
t Chain and Attachments
t Bearings
tWear Materials
t Other Drive Chains
t Flights
t Sprockets
t Filler Blocks
t Hardware
Additional equipment available for rectangular clarifiers, bar screens and grit collectors;
e n v i r o d i v i s i o n
VCSS700 STAINLESS STEEL CHAIN
www.vikingchains.com
PAGE 6VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
VCSS700 CHAIN
CHAIN SPECIFICATION:
Stainless Steel Collector Chain
t 6.00" Pitch
t 403 Grade Stainless SteelMaterial
t 33,000 lb. Average Ultimate Strength
t 3.9 lbs Per Foot
t Hardened Pins and Bushings
ATTACHMENTS AVAILABLE:F226, F228, D22, K2, A2, A42, AM116
APPLICATIONS:For use in primary and secondaryclarifiers, grit collectors, and barscreens.
BENEFITS:VCSS700 stainless steel chain is a lightweight but high strength chain designed to withstand highly corrosiveenvironments. Provides superior performance in long length clarifiers with high loads and longer chain life inhigh grit and abrasive environments. Designed to be compatible with VCSS700 series chain saver sprocketsand with other stainless steel chain manufacturer’s components. Can be used with either fiberglass, laminatedwood or aluminum flights.
VCSS700 STAINLESS STEEL CHAIN
www.vikingchains.com
PAGE 7
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
VCSS700/F228
VCSS700/F226
Chain Part No. A B C D E F G H I Hole Dia.
VCSS700 / F228 3.00 7.875 0.891 1.484 4.50 1.00 .234 5.50 3.75 .438
Additional equipment availablefor rectangular clarifiers, barscreens and grit collectors;
t Other Chain and Attachments
t Drive Chain
t Sprockets
t Bearings
t Flights
t Filler Blocks
tWear Materials
t Hardware
Chain Part No. A B C D E F G H I J (pitch)
VCSS700 2.844 1.563 1.281 .569 1.024 .234 1.188 1.578 1.891 6.00
All dimensions are in inches
Chain Part No. A B C D E F G H I Hole Dia.
VCSS700 / F226 3.00 6.109 0.891 1.50 2.625 1.093 .234 5.50 3.75 .438
e n v i r o d i v i s i o n
VCSS701 STAINLESS STEEL CHAIN
www.vikingchains.com
PAGE 8VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
VCSS701 CHAINDirect Replacement for Non-Metallic Chain
CHAIN SPECIFICATION:
Stainless Steel Collector Chain
t 5.844" Pitch
t 403 Grade Stainless SteelMaterial
t 19,000 lb. Average Ultimate Strength
t 2.2 lbs Per Foot
t Hardened Pins and Bushings
ATTACHMENTS AVAILABLE:F226 and F228
APPLICATIONS:For use in primary andsecondary clarifiers.
BENEFITS:VCSS701 stainless steel chain is a lightweight stainless steel alternative for use in applications that haveutilized non-metallic chain. It is designed to run on standard 720S style sprockets - perfect if sprockets are notin need of change out. This lightweight but high strength chain will withstand highly corrosive environments.It is compatible with other chain manufacturer’s components.
Chain Part No. A B C D E F G H I J (pitch)
VCSS701 2.578 1.406 1.172 .453 .882 .188 1.266 1.219 1.453 5.844
VCSS701 STAINLESS STEEL CHAIN
www.vikingchains.com
PAGE 9
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
VCSS701/F226VCSS701/F228
Chain Part No. A B C D E F G H I Hole Dia.
VCSS701 / F228 2.913 8.266 1.00 2.031 4.50 .735 .188 5.50 3.75 .438
Chain Part No. A B C D E F G H I Hole Dia.
VCSS701 / F226 2.913 6.50 1.00 1.641 2.625 1.234 .188 5.50 3.75 .438
e n v i r o d i v i s i o n
VCSS78 STAINLESS STEEL CHAIN
www.vikingchains.com
PAGE 10VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
VCSS78 CHAINCHAIN SPECIFICATION:
Stainless Steel Drive Chain
t 2.609" Pitch
t 403 Grade Stainless SteelMaterial - Hardened
t 3,300 lb. Working Load
t 24,000 lb. Average Ultimate Strength
t 3.9 lbs. Per Foot
APPLICATIONS:For use as a drive chain inwastewater treatment applications.
BENEFITS:VCSS78 stainless steel chain is a high strength chain made to withstand highly corrosive and abrasiveenvironments. Designed to stand up to high load applications with very minimal stretch.
VCSS78 STAINLESS STEEL CHAIN
www.vikingchains.com
PAGE 11
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
Additional equipmentavailable for rectangularclarifiers, bar screens and gritcollectors;
t Chain and Attachments
t Other Drive Chains
t Sprockets
t Bearings
t Flights
t Filler Blocks
tWear Materials
t Hardware
403 HARDENED STAINLESS STEEL CHAIN
MAXIMUM ABRASION AND CORROSION RESISTANCE
CAN BE USED WITH METALLIC OR NON-METALLIC STANDARD 78 SERIES SPROCKETS
Chain Part No. A B C D E F G H (pitch)
VCSS78 2.625 1.438 1.188 .438 .875 .234 1.125 2.609
www.vikingchains.com
PAGE 12VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
STRONG
Viking Chains
Viking Chains GroupEnviro DivisionYour System Provider
The Viking Chains Group-EnviroDivision has been providing qualitycomponents for Municipal andIndustrial Water & Wastewaterapplications for 15 years. TheViking Chains Group - EnviroDivision offers full systemintegration, supported by aworldwide dedicated rep network.
System projects of all sizes arehandled 100% by the Viking Group.We continue to link a chain ofsatisfied clients around the world.
Over 150 years of chain experiencesupports our application andengineering promise of being a“solution provider”. We believe it isessential to provide on site serviceand client consultation to properlyassess the customer's needs andindividual application requirements.
Our quality products include Chain,Sprockets, Flights, Wear Shoes,Bearings, Shafts, and Static SleeveBushings. Practically everyconsumable in Clarifiers, GritChannels, Bar Screens, TravelingWater Screens for all water andwaste water applications aresupplied by Viking Chains Group -Enviro Division.
DRIVE COMPONENTS
• Engineered to match systemrequirements and special tank layoutconsiderations
• Non-metallic stainless steel and cast iron drive chains
• Shear pin drive hub assemblies with replaceable non-metallicsprocket rim
• Solid or split body non-metallic or cast iron driven sprockets
FLIGHTS
• High strength fiberglass• Ultra high-strength aluminum• Laminate fir to replace existing
redwood also available• Stainless steel
hardware• 6 or 8 inch
available forstandard F26 or F28attachments
www.vikingchains.com
PAGE 13DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
RELIABLE
enviro products
WALL BEARINGS• Babbitted or
UHMW lined• Split designs for ease
of replacement• Bolt patterns
designed to matchmost existing wallanchor locations forretrofit applications
• Static shaftbracketsalso available inconjunction withsprocket sleevebearings
COLLECTOR CHAINEngineered Specific Options:
• High Strength non-metallic
• 403 Stainless Steel• Cast Iron• 6 or 8 inch
flight attachments
COLLECTOR SPROCKETSMaterials matched to specificapplication based on load and abrasion:
• Nylon and UHMW available• With or without integrally molded chain saver rim• Hunting tooth design• Split or solid construction• High-strength hub designs have non-binding hardware
to prevent accumulation
WEAR COMPONENTS• UHMW wear strips• Stainless steel hardware• UHMW wear shoes are
reversible to provide two wear surfaces• Cast iron knock-out wear shoes available for cast iron
collectors
COLLECTOR DRIVE UNITS• Viking drive units are hydraulically powered, designed to run
economically 24/7/365• Line speed and torque can be independently adjusted to fit
each particular line• Easy line monitoring, with finger tip control• No more shear pins. No prolonged
downtime
e n v i r o d i v i s i o n
VC CAST IRON CHAIN
www.vikingchains.com
PAGE 14VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
VC720S CHAIN PMICHAIN SPECIFICATION:
Pearlitic Malleable Iron Chain
t 6.00" Pitch
t Heat Treated Pin
t 304 Stainless Steel Cotter
tMeets ANSI Standards
t Cottered or Riveted
tMaximum Working Load:4,250 lbs.
tMinimum Ultimate Strength:39,000 lbs.
tWeight: 5.2 lbs./ft.
ATTACHMENTS AVAILABLE:F226, F228, A21, A42, A53,AD474, AM116, F2, F3 (SF-4),K2, M1.
APPLICATIONS:For use in primary clarifiers,secondary clarifiers, bar screensand grit applications.
BENEFITS:VC720S Cast Iron Chain offers maximum strength in harsh environments. This chain is interchangeable withother chains manufactured under ANSI standards. Heat treated pin and 304 stainless steel cotter suppliedspecifically for wastewater applications.
VC CAST IRON CHAIN
www.vikingchains.com
PAGE 15
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
VCH78 CHAIN PMICHAIN SPECIFICATION:
Pearlitic Malleable Iron Chain
t 2.609" Pitch
t Heat Treated Pin
t 304 Stainless Steel Cotter
tMeets ANSI Standards
t Cottered or Riveted
tMaximum Working Load:2,850 lbs.
tMinimum Ultimate Strength:22,300 lbs.
tWeight: 4.2 lbs./ft.
APPLICATIONS:For use as a drive chain inwastewater treatment applications.
BENEFITS:VCH78 Cast Iron Chain offers maximum strength in harsh environments. This chain is interchangeable withother chains manufactured under ANSI standards. Heat treated pin and 304 stainless steel cotter suppliedspecifically for wastewater applications.
t Other Chain and Attachments
t Other Drive Chains
t Sprockets
t Bearings
t Flights
t Filler Blocks
tWear Materials
t Hardware
Additional equipment available for rectangular clarifiers, bar screens and grit collectors;
e n v i r o d i v i s i o n
VC SPROCKETS
www.vikingchains.com
PAGE 16VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
COMBINATION SPROCKETS - CAST IRONBODY WITH UHMW SEGMENTAL RIMS
ALL UHMW SPROCKETS & ALL UHMW SEGMENTAL RIM SPROCKETS
CAST IRON CHILLED RIM SPROCKETS
Cast Nylon Sprockets and Stainless Steel Sprockets also available
SPROCKET DESIGNS AVAILABLE
VC SPROCKETS
www.vikingchains.com
PAGE 17
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
CAST IRON CHILLED RIM SPROCKETS
CHAIN COMPATIBILITY:Recommended for use with cast iron chain.
OPTIONS:t Various hub designs; A, B, C, C-Offset.
t Chain Saver Rims or Non Chain Saver Rims onall 720 style sprockets.
t Dished design available for some 78 style sprocket sizes.
t Split or solid construction.
BENEFITS:Stands up to harsh environments and high grit applications
t Shear Pin Sprocket Assemblies
t Jawclutch and HandwheelAssemblies
t Static Sleeves
t Stub Shafts
tWall Bearings
t Set Collars
t Pillow Blocks
Other related products available;
t Chain and Attachments
t Drive Chain
t Flights
t Filler Blocks
tWear Materials
t Hardware
Additional equipment available for rectangular clarifiers, bar screens and grit collectors;
COMBINATION SPROCKETS ALL UHMWSPROCKETS & ALL UHMW SEGMENTAL RIMSPROCKETS
CHAIN COMPATIBILITY:Recommended for use with non-metallic or stainlesssteel chains.
OPTIONS:t Chain Saver Rims or Non Chain Saver Rims on all
720 style sprockets.
t Dished design available for some 78 style sprocket sizes.
t Split or solid construction.
BENEFITS:All UHMW & UHMW Segmental Rims;Lightweight for easy installation and change out.
Combination Rims; can be reversed for extra wear.Easy installation and change out.
SHEAR PIN ASSEMBLY DISHEDSPROCKET
WALL BEARING PILLOW BLOCK STATIC SLEEVES
e n v i r o d i v i s i o n
VC FLIGHTBOARDS
www.vikingchains.com
PAGE 18VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
LAMINATED WOOD FLIGHTS
APPLICATIONS:For use in primary clarifiers,secondary clarifiers, and crosscollectors.
SIZES:2 1/2" X 6" = Standard 6"
2 1/2" X 7 1/2" = Standard 8"
MATERIAL:Laminated Wood – Douglas Fir
Kiln dried to 12% to 15%moisture content with gradientnot to exceed 5%.
WEIGHT:6" = 3.4 lbs./ft.
8" = 4.3 lbs./ft.
BENEFITS:Decay hazard in wastewater applications much less than other wood flight alternatives. Long life in veryharsh environments.
"C" CHANNEL FIBERGLASS FLIGHTBOARD
LAMINATED WOOD FLIGHTBOARD
t Chain and Attachments
t Drive Chains
t Sprockets
t Bearings
t Filler Blocks
tWear Materials
t Hardware
Additional equipment available for rectangular clarifiers, bar screens and grit collectors;
VC FLIGHTBOARDS
www.vikingchains.com
PAGE 19
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
"C" CHANNELFIBERGLASSFLIGHTBOARDSAPPLICATIONS:For use in primary clarifiers,secondary clarifiers, and cross collectors.
SIZES:Standard 6" and 8"
MATERIAL:Fiberglass reinforced isophthalicpolyester resin (55% minimumglass content)
WEIGHT:6" = 1.21 lbs./ft.
8" = 1.39 lbs./ft.
BENEFITS:Lightweight for ease of installation. Flights can be custom fabricated to fit any application. Standardfabrication is available for use with standard 6" and 8" flight attachments.
Also available; t 316 Stainless Steel Flight mounting Hardware Sets
t 6" and 8" Filler Blocks
t Carry and Return Wearshoes
e n v i r o d i v i s i o n
VC ALUMINIUM FLIGHTBOARDS
www.vikingchains.com
PAGE 20VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
ALUMINUM FLIGHTBOARDS
APPLICATIONS:For use in primary clarifiers,secondary clarifiers, and crosscollectors.
SIZE:2 1/2” X 7” for use with 8” flightattachments. Can be supplied incustom cut lengths up to 32 feet long.
WEIGHT:2.41 lbs./ft.
MATERIAL:6060-T6 Aluminum
BENEFITS:t Lightweight for easy installation.
t No need for filler blocks.
t No notching or drilling required.
t Can be completely assembled in advance with minor field adjustments.
t Can be repaired and welded on-site or in a shop.
t Can be RECYCLED for salvage value after use.
VC ALUMINIUM FLIGHTBOARDS
www.vikingchains.com
PAGE 21
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
ALUMINIUM EXTRUDED
FLIGHTS CAN BE SUPPLIED
WITH;
t Carry and return wearshoesmade of UHMW.
t Hardware which includesaluminum extruded nuts andstainless steel bolts andwashers for attachingwearshoes and flightattachments.
t Rubber scraper assemblycomplete with retainer plate,stainless steel bolts andwashers, and extruded nuts.
1 1 FLIGHT
2 1 RUBBER SCRAPER
3 2 GUIDE/RETURN SHOE
5 4 SINGLE NUT
6 6 DOUBLE NUT
7 1 WIPER RETAINER
4 2 CARRYING/WEAR SHOE
ITEM QTY. DESCRIPTION
t Chain and Attachments
t Drive Chain
t Other Flights
t Sprockets
t Bearings
t Filler Blocks
tWear Materials
t Hardware
Additional equipment available for rectangular clarifiers, bar screens and grit collectors;
e n v i r o d i v i s i o n
VC WEAR MATERIALS
www.vikingchains.com
PAGE 22VANCOUVER, WA 360-694-1416 TOLL FREE 1-866-513-4078
ACWORTH, GA 678-574-0251 TOLL FREE 1-877-941-1500
PRODUCTS:
t Carry Wearshoes
t Return Wearshoes
t Grit Collector Shoes
tWearstrips
MATERIALS AVAILABLE:
tWearshoes: UHMWPolyurethaneCast Nylon
tWearstrips: UHMW Cast Nylon
APPLICATIONS:
For use in primary and secondaryclarifiers, bar screens, and gritapplications.
BENEFITS:VC wear materials are lightweight and designed for easy installation. Components promote smooth andefficient operation allowing for extended system equipment life.
VC WEAR MATERIALS
www.vikingchains.com
PAGE 23
e n v i r o d i v i s i o n
DELTA, BC 604-952-4146 TOLL FREE 1-800-324-1244VANIER, PQ 418-650-6090 TOLL FREE 1-888-650-6090
STANDARD SIZES AVAILABLE:Thickness; 3/8", 1/2", 5/8"
Widths; 2 1/2", 2 5/8", 3", 3 1/2",4", 5"
t Five hole and customwearstrips available uponrequest.
t 1-3/8" weld washers can besupplied for spot weld or thru-bolt fabricating.
Chain Part No. A B C D E F
VCSC1 5.50 3.0 1.375 .875 3.75 .5625
Chain Part No. A B C D E F
VCSR1 5.00 3.50 1.375 2.50 --- .5625
WEARSHOES
WEARSTRIPSAll dimensions are in inches Custom wearshoes available upon request
STANDARD CARRY WEARSHOE STANDARD RETURN WEARSHOE
t Chain and Attachments
t Drive Chains
t Sprockets
t Bearings
t Flights
t Filler Blocks
t Hardware
Additional equipment available for rectangular clarifiers, bar screens and grit collectors;
www.vikingchains.com
637 Godin AvenueVanier, PQ
Canada G1M 3E6Phone (418) 650-6090
Fax (418) 650-2490Toll free 1-888-650-6090
EASTERN DIVISION
3411 Novis Pointe RoadAcworth, Georgia
USA 30101-6639Phone (678) 574-0251Fax 1-877-797-5554
Toll free 1-877-941-1500
USA CORPORATE & FULL SERVICE CENTER
7392 Progress Place,Delta, British Columbia
Canada V4G 1A1Phone (604) 952-4146
Fax (604) 952-4053Toll free 1-800-324-1244
HEAD OFFICE & MANUFACTURING
10914 NE 39th Street,Vancouver, Washington
USA 98682Phone (360) 694-1416
Fax (360) 694-1412Toll free 1-866-513-4078
PACIFIC SERVICE CENTER
VC CHAINS CORPORATION VIKING CHAINS
Prin
ted
in C
ana
da
on
recy
cled
pa
per
e n v i r o d i v i s i o n