s · web viewfig. s2 eis response for modified gold electrodes incubated with 1, 2and 3µm as1411...
TRANSCRIPT
Supplementary Information
Electrochemiluminescence Detection of Human Breast Cancer Cells using Aptamer 3D
Printed Microchannel Bipolar Electrode
Hasan Motaghi, Sima Ziyaee, Masoud Ayatollahi Mehrgardi*, Abolghasem Abbasi Kajani, Abdol-Khalegh Bordbar
Department of chemistry, University of Isfahan, Isfahan, 81746-73441, Iran
∗ Corresponding author. Tel.: +98 311 7932710; fax: +98 311 6689732. E-mail addresses:
[email protected], [email protected] (M.A. Mehrgardi).
Fig. S1 Nyquist plots for electrochemical impedance spectroscopy (EIS) data collected from the bare
or modified gold electrodes with 2µM AS1411 aptamer following different incubation time. All
measurements were recorded in a solution containing K3[Fe(CN)6]/K4[Fe(CN)6] (1 : 1, 0.5 mM) and
KCl (0.1 M). (impedance spectral frequency 0.1 – 10 kHz)
Fig. S2 EIS response for modified gold electrodes incubated with 1, 2and 3µM AS1411 aptamer in
PBS solution (pH 7.4)
Fig. S3 Ultraviolet-visible spectra of the gold nanoparticles before and after modification with aptamers
Fig. S4 Plots of ECL intensity of aptasensor in different concentrations of H2O2 solution (luminol:10
mM)
Fig. S5 Dependence of ECL responses on pH of the detection solution (luminol: 10 mM and H2O2: 20 µM)