s12/1 s12/1 …file.seekpart.com/keywordpdf/2011/3/22/20113227518113.pdfrear suspension original...

SUSPENSION/STEERING/BRAKES/REAR AXLE

ENERGY SUSPENSION- BODY MOUNTS ................................................................. S12/1IDIDIT- TILT STEERING COLUMNS ......................................................................... S12/1FRONT SUSPENSION- ENERGY suspension bushes ................................................. S12/3HEIDTS-FRONT SUSPENSION aftermarket style ...................................................... S12/5STEERING-HEIDTS ....................................................................................................... S12/8BRAKES-HEIDTS performance..................................................................................... S12/8REAR SUSPENSION original type .................................................................................. S12/HEIDTS-REAR SUSPENSION [4-LINK] aftermarket style ....................................... S12/9AIR-RIDE- REAR SUSPENSION aftermarket style .................................................... S12/9AIR-RIDE- CONTROL- COMPRESSOR & TANK kits ........................................... S12/10AIR-RIDE FRONT SUSPENSION aftermarket style................................................. S12/10SHOCKABSORBERS-STREET front and rear ............................................................. S12/REAR AXLE & PARTS.................................................................................................. S12/11

Real Steel Tel: 01895 440505e-mail: [email protected]

Iss31

S12/1 S12/1

Body Mounts

Chevrolet full Size

BY3-4106G 1955-57 Not 2dr hardtop .................... £65.74BY3-4120G 1955-57 2dr hardtop ........................... £65.74BY3-4138G 1965-70 2dr hardtop ........................... £61.37

Polyurethane body mount set-Black

Chevrolet Camaro

BY3-4142G 1967-2002 all models Black ............... £66.33

Polyurethane body [subframe] mount set-Black

Chevrolet CorvettePolyurethane body mount set-Black

BY3-4153G 1963-64 Seat belt mounts ................... £27.29BY3-4102G 1963-67 Hardtop only ......................... £28.75[part above is pictured]BY3-4152G 1963-67 Convertible only ................... £49.61BY3-4126G 1973-82 All models ............................ £55.84

Chevrolet Chevelle, Malibu, Monte-Carlo, Laguna, El-CaminoPolyurethane body mount set-BlackBY3-4128G 1964 Not convertible .......................... £85.92BY3-4111G 1965-67 Not convertible ..................... £85.92BY3-4115G 1968-72 Not convertible ..................... £64.44BY3-4134G 1970-72 Monte-Carlo not convert ...... £69.44BY3-4113G 1968-72 El-Camino only .................... £64.44

Pontiac Firebird & Trans AmPolyurethane body [subframe] mount set-Black

BY3-4142G 1967-75 check below .......................... £65.33BY3-4157G 1973-75 +1” hole in core support ....... £53.95[part above is pictured]BY3-4144G 1976-81 .............................................. £70.86

Energy Suspension Polyurethane performance components, are made in the USA. Energyuse a material called “Hyper-Flex”, which is the result of 20+ years of experience. Carefulselection of material firmness [durometer] is used for each specific application on the vehicles suspension & frame. Hyper-Flex components do not rot or deteriorate from exposureto oils & under-car chemicals or atmospheric conditions, like smog & ozone. Handling &steering response is vastly improved over standard, soft bushes. Ride could be stiffer.

The IDIDIT steering column is world renowned, and since 1986 has been fitted to manythousands of Hot-Rods, all over the world. IDIDIT is a family business, based in the stateof Michigan, and their steering columns are made in the USA, to very high standards. Various finishes are available, although we only carry in stock- chrome & paintable-steel. Otherfinishes, like- black powder coated, brushed & polished aluminium, are available to order.These columns are available in plain, 8 position tilt and with or without column shift.Measuring your car, to see which column would be best, is critical. Please ask for measuring instructions and we will gladly send them to you . More time spent doing this, willensure a perfect fit later on. Most columns feature a flashing indicator control, a 4-wayhazaard light control & horn. Other options including cruise control are available.

Steering Columns

Tilt Steering Column Paintable Steel-Universal

Does NOT have column shift Does NOT have column shiftMade by iditit- Made by iditit-

BYAJW265 28” length, 2” tube OD .......... £330.10BYAJW255 30” length, 2” tube OD .......... £330.10BYAJW245 32” length, 2” tube OD .......... £330.10

BYAJW270 28” length, 2” tube OD .......... £433.57BYAJW260 30” length, 2” tube OD .......... £412.90BYAJW250 32” length, 2” tube OD .......... £398.33

Tilt Steering Column Chrome-Universal

Tilt Steering Column Chrome-Universal HAS column shift

Made by iditit-

BYAJW610 30” length, 2.25” tube OD ..... £665.27BYAJW615 33” length, 2.25” tube OD ..... £600.46

Tilt Steering Column Paintable Steel-UniversalHAS column shift

Made by iditit-

BYAJW605 30” length, 2.25” tube OD ..... £459.72BYAJW585 33” length, 2.25” tube OD ..... £459.72

S12/2 S12/2- SUSPENSION/STEERING/BRAKES/REAR AXLE -

Steering


Tilt Steering Column Paintable Steel-Universal

This column HAS column shift

BYAJW215 33” length, 2-1/4” tube OD .... £507.04

Tilt Steering Column Paintable Steel-1953-56 Ford 1/2 ton Tilt Steering Column Paintable Steel-1953-56 Ford 1/2 tonThis column HAS column shift Complete with horn relay &adapter plug to connect your Ford wiring to the Ididit wiring. Ifyou retain the original steering box, you will need to chop off theinner shaft and re shape to take a u-joint. 30” long. 2-1/4” tube.

BYAJW150 1953-56 Ford 1/2 ton Pickup . £522.56

Tilt Steering Column -1955-56 Chevy

Does NOT have column shift If you retain the original manualsteering box, you will need to chop off the inner shaft and reshape to take a coupler. An installation kit may be required.

Tilt Steering Column Paintable Steel-1955-56 ChevyThis column HAS column shift If you retain the original manualsteering box, you will need to chop off the inner shaft and reshape to take a coupler. An installation kit may be required. Hasprovision to use original dash indicator. Only works with 3 & 4speed, not Powerglide.

BYAJW185 1955-56 Chevy ....................... £568.09

Tilt Steering Column Paintable Steel -1967-69 Camaro

Steering Column Accessories/Installation Parts

Pivoting Drop Brackets-Polished Aluminium

Often required to hold the steering column in place, at the rightangle, where the original part will not work.

BYAJW070 2” tube, 2-1/2” drop ................. £76.37BYAJW075 2” tube, 3-1/2” drop ................. £77.59

BYAJW080 2-1/4” tube, 2-1/2” drop ........... £76.37BYAJW085 2-1/4” tube, 3-1/2” drop ........... £77.94

BYAJW515 2-1/4” tube, 5” drop 1932 Ford £75.83BYAJW520 2” tube, 5” drop 1932 Ford ...... £75.83

BYAJW830 Upper mount bracket ................ £10.92Use this metal bracket on a 47-54 Chevy P.U.

Floor Mounts for Column

In some cases, the original bottom column mount, will not workwith your new column.

BYAJW170 2” tube budget floor mount ...... £27.11BYAJW115 2-1/4” tube budget floor mount £26.57BYAJW190 2” tube budget Tr-Chevy .......... £16.81

BYAJW175 2” swivel ball floor mount ...... £111.32BYAJW500 2-1/4” swivel ball floor mount £102.28Above numbers [BYAJW175/500] are for a chrome stg column

BYAJW510 2” swivel ball floor mount ...... £100.10BYAJW505 2-1/4” swivel ball floor mount £100.10

Budget Floor Mount With Trim KitThis lower bracket comes with a polished aluminium trim ring &hardware. To complete the installation, a boot is also available.

BYAJW105 Floor mount trim kit 2” tube .... £44.98BYAJW110 Black boot for above kit ........... £20.24

Cruise Control KitIncludes the parts needed to fit cruise control on a non computer-ised engines. Servo & control unit are small enough to fit underany dash. Includes pulse generator & control handle. Add thisworthy item to your column.

BYAJW160 Cruise control kit .................... £336.58BYAJW165 Cover-cruise handle-alum pol .. £30.36

Made by iditit-

Made by iditit-

Made by iditit-

Made by iditit-

Made by iditit-

Made by iditit-

BYAJW145 1953-56 Ford 1/2 ton Pickup ............ £351.83

Does NOT have column shift Complete with horn relay & adapterplug to connect your Ford wiring to the Ididit wiring. If you retainthe original steering box, you will need to chop off the inner shaftand re shape to take a u-joint. 30” long. 2” tube.

BYAJW220 Paintable steel ......................... £330.10BYAJW225 Chrome ................................... £433.57

BYAJW045 1967-68 Camaro/Firebird ....... £351.83BYAJW050 1969 Camaro only-w/ignition £516.35

Does NOT have column shift. For the 1967-68 models, a wiringharness adaptor is included. A 1969 Camaro steering wheel, boltsdirectly to the IDIDIT column. It is recommended you fit a new“rag joint” connection.

Tilt Steering Column- Chrome- Ford Mustang

These columns are for floor shift only. Designed for your classicMustang. Save and use your original under dash mount. A newfloor mount comes with the column. Complete with a Ford turnsignal switch, and a Ford type wiring plug. Designed to acceptyour original Mustang steering wheel, and place it in the originalposition. You could use an alternative steering wheel with an adap-tor. The lower shaft is 3/4” x 36. For the 1965-66 and some 67models you will need a coupler BYAJW195. You will also needto cut off your old shaft, which goes into the steering box, &modify it to 3/4” DD. Later 67 and 68 use kit BYAJW880. The1969 model uses a “Rag Joint” BYAJW885.

BYAJW860 1965-66 Mustang ................... £548.54BYAJW865 1967 Mustang ......................... £548.54BYAJW870 1968 Mustang- collapsible ..... £602.62BYAJW875 1969 Mustang- collapsible ..... £602.62

Made by iditit-


Steering/Front Suspension


BYAJW035 3 bolt polished ...................................... £72.30BYAJW040 3 bolt chrome ..................................... £107.95BYAJW030 9 bolt polished- short .......................... £118.62BYAJW060 9 bolt polished + horn .......................... £70.82BYAJW055 9 bolt chrome + horn .......................... £108.44[part above is pictured]

Lever with Dipswitch [High Beam]

Control your high beam, from your flashing indicator lever.

BYAJW065 Dipswitch lever ....................... £132.06

INSTALLATION KITSThere are many installation kits for the 55-56-57 Chevy. Here are the onesthat we keep.

BYAJW240 55 Chevy floor shift .............. £122.40Original harness, coupler, floor mount, 4-way kit, OE manual box[above part is pictured]BYAJW230 55 Chevy floor shift .............. £194.68Original harness, rag joint, floor mount, 4-way kit, OE power boxBYAJW180 56 Chevy floor shift .............. £122.40Original harness, coupler, floor mount, 4-way kit, OE manual boxBYAJW235 56 Chevy floor shift .............. £194.68Original harness, coupler, floor mount, 4-way kit, OE power box

Cable Shift for Column Change

This kit enables you to connect up your new column to your auto-matic trans. Consists of- cable, transmission bracket and cablebracket for column.

BYAJW090 GM Trans 69 on, IDID 2” ...... £123.70BYAJW095 GM Trans 69 on, IDID 2-1/4” £113.64BYAJW625 C4 Linkage clamp assy 2-1/4” . £48.35BYAJW630 C4 Trans bracket/cable kit ....... £66.53BYAJW640 C6 Trans bracket/cable kit ....... £68.53

BYAJW620 Half moon shift lever ................ £29.09The half moon shift lever will help you avoid the brake pedal.The lever is complete with bushing & hardware to mount to yourIDIDIT steering column.

Indicator for Transmission

Enables you to see which gear you are in. Mounts on top of column.

BYAJW120 Acrylic indicator +pointer 3spd .......... £24.29BYAJW125 Acrylic indicator +pointer 4spd .......... £24.18BYAJW130 Also includes chrome housing 3spd .... £67.46BYAJW135 Also includes chrome housing 4spd .... £67.78

GM Horn kit 1955-68

This kit adapts most GM stock steering wheels to an IDIDIT steer-ing column. The kit consists of- aluminium trim ring, horn con-tact plate, spring, pin & retainer.

BYAJW100 Horn contact kit GM ................ £27.06

Female End plug for Column

This plug mates up to the plug on the IDIDIT steering column. Enables youto wire up your column and use a proper plug.

BYAJW140 Female plug ........................................ £17.75

Coupling Parts for Steering Rack/Box

There are many types of coupling to join your column to your steering rack/box. Here are some of them.

BYAJW750 UJ steel 3/4” DD to 26 x 9/16” £82.84Above joint is for Heidts manual stg rackBYAJW555 UJ steel 1”DD to 3/4” smooth .. £72.13BYAJW645 UJ steel 1”DD to 3/4”DD ......... £90.02BYAJW565 Pol S/S u-jnt 1”DDx3/4”DD .. £137.06BYAJW595 U-joint steel 3/4DD to 3/4DD £106.03BYAJW600 UJ steel 3/4DD to Mustang “V”£85.80Above joint is for Heidts power stg rackBYAJW535 Pol S/S u-jnt 3/4”DDxMust”V”£192.85The above joint has a built in vibration reducer, designed to stoppulses from the power steering pump reaching the column.

BYAJW195 Coupler- 3/4”-36 x 3/4” DD .... £55.60BYAJW200 Coupler- 1 DD x 3/4” DD ........ £55.60

BYAJW675 Steel shaft 3/4” DD - 16” ......... £21.96BYAJW680 Steel shaft 3/4” DD - 32” ......... £29.64BYAJW530 Polished S/S shaft 3/4”DD 22” £69.00

BYAJW210 Rag joint-3/4”-36 x 3/4” x 30 £130.26BYAJW205 Rag joint- 1-DD x 3/4” x 30 .. £130.26

Steering Wheels- Billet Specialties

BY29425 Indy- 14” ..................................... £225.82BY30137 Split Spoke- 14” ......................... £225.82Shown at rightBY29008 Black leather 14” half wrap .......... £45.13Leather half wrap is required for both wheels

These steering wheels use a 9 bolt adaptor. They have milled finger notchesfor an ultra comfortable grip. Many types available.

Front Suspension

Chevrolet/Pontiac Full SizePolyurethane front end control arm bushing set

BY3-3108G 1955-64 Chevrolet .............................. £59.64BY3-3150G 1965-70 Chevrolet .............................. £40.44Lowers- reuse metal partsBY3-3103G 1971-73 Chevrolet + Bonneville ......... £60.05Only models with 1-5/8” OD front lower bushes.

Chevrolet Camaro/Pontiac Firebird & Trans am

Polyurethane front end control arm bushing set

BY3-3101G 1967-69 .............................................. £60.85BY3-3102G 1970-72 .............................................. £70.25BY3-3104G 1973-74 1-3/8” OD lowers ................. £60.84BY3-3103G 1973-74 1-5/8” OD lowers ................. £60.05Above part also fits 1973 FirebirdBY3-3105G 1975-79 .............................................. £63.36Above part also fits 1974-79 FirebirdBY3-3106G 1980-81 .............................................. £67.68BY3-3157G 1982-92 Lowers only .......................... £37.26BY3-3164G 1993-02 [Lowers re-use metal parts] .. £61.78

Steering Wheel AdaptorsIn most cases, a steering wheel adaptor will be required to enableyou to attach your steering wheel.

BYAJW195 Coupler 3/4 x 36 // 3/4 DD ..... £55.601965-early 67. On these vehicles, the steering staft comes out of the steeringbox and up into the column [one piece]. To fit a different column, this shaftwill need to be cut, & then modified to take the coupler.BYAJW880 Kit later 67 and 68 ................ £178.31Consists of a coupler, short piece of connecting shaft, & a rag joint.BYAJW885 Rag joint for 69 ..................... £119.90This is a flexible coupling to join the column to the OE stg box.

Listed below, are the installation parts for the IDIDIT column, [versionthat uses the OE steering wheel] for the 1965-69 Ford Mustang.



Front Suspension

Chevrolet Corvette

Polyurethane front end control arm bushing set These bushes will give addedperformance without creating any adverse changes to the original ride.

BY3-3108G 1963-82 .............................................. £59.64BY3-3142G 1984-96 .............................................. £68.02

Polyurethane front end control arm bushing set

BY3-3117G 1964-66 .............................................. £60.84Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino, LeMans, GTO, Tem-pest. On 1966 Chevrolet models, there are two size rear lower bushes, theseare 1.9” OD.BY3-3101G 1966-74- Bushes are round ............... £60.85Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino, LeMans, GTO, Tem-pest. On 1966 Chevrolet models, there are two size rear lower bushes, theseare 1.65” OD. Nova & Chevy 2- 1968-74.BY3-3172G 1967-72 Oval rear lower bushes ........ £60.85Above number fits- Chevelle, Malibu, Monte-Carlo, Laguna, El-Camino,LeMans, GTO, Tempest.BY3-3160G 1962-67 .............................................. £51.13Above number fits- Nova, Chevy 2- 1962-67.

Chrysler- RWDPolyurethane front end control arm bushing set

BY5-3132G 1962-76 A body uppers only .............. £40.44This number also fits “B-Body” 1965-72 uppers only & “E-Body” 70-74

Ford Motor CompanyPolyurethane front end control arm bushing set. Must re-use existing outermetal shells.

BY4-3101G 1960-66 .............................................. £10.96Falcon, Ranchero, Mercury Comet 1961-65, Mustang-lowers onlyBY4-3131G 1962-65 Fairlane ................................. £16.44BY4-3102G 1967-71 1-7/16” OD lower ................... £9.78Fairlane, Grand Torino, Torino, Ranchero, Mercury Comet 1966-77, Mus-tang 67-73 1-7/16” OD lowerBY4-3106G 1967-71 1-9/16” OD lower ................... £9.05Fairlane, Grand Torino, Torino, Ranchero, Mercury Comet 1961-65, Mus-tang 1967-73 1-9/16” OD lowerBY4-3130G 1974-78 Mustang ................................ £47.72BY4-3132G 1979-82 Mustang excl HD susp’ ........ £39.36Above also fits Mustang 1983-93BY4-3108G 1979-82 Mustang with HD susp’ ........ £23.08BY4-3144G 1994-04 Mustang ................................ £55.91

Chrysler notes-

“A” body- Dart, Demon, Duster, Valiant (Barracuda to 69)

“B” body- Charger, Coronet, Satellite, GTX, Roadrunner, Superbee

“E” body- (Barracuda 70 and up) & Challenger

Chevrolet & Pontiac

Front Strut Rod Bushes

Chevrolet

Polyurethane strut rod bushes

BY3-7109G 1965-70 .............................................. £22.04Above number fits- Belair, Biscayne, Caprice, Impala, Station WagonBY3-7105G 1962-67 .............................................. £18.08Above number fits- Nova & Chevy 2

Chrysler- RWD

Polyurethane front strut rod bush set

BY5-7105G 1962-65 .............................................. £11.51Above number fits- “A” body 62-65BY5-7109G 1966-76 .............................................. £21.29Above number fits- “A” body 66-76, “B” body 65-74, “E” body 70-74.

Ford Motor Company

Polyurethane front strut rod bushes

BY4-7111G 1960-66 .............................................. £20.40Above number fits- Falcon, Ranchero, Fairlane 62-65, Mustang 64-66,Mercury Comet 1961-65BY4-7112G 1967-71 .............................................. £20.98Above number fits- Fairlane, Grand Torino, Torino, Ranchero, Mustang1967-73, Mercury Comet 1966-77, Cougar 1967-73BY4-7117G 1972-79 .............................................. £20.56Above number fits- Fairlane, Grand Torino, Torino, Ranchero, Galaxie 1965-78, Thunderbird 1972-79, Cougar 1974-79BY4-7113G 1974-78 .............................................. £18.91Above number fits- Mustang 1974-78

Front End Links- Anti-roll Bar

Front Anti-Roll Bar LinksPolyurethane bushed front end links for anti-roll bar

Lengths- relate to straight shaft between bush platform washers

BY9-8120G 1-5/8” .................................................. £18.28Above number fits- 1965-70- Belair, Biscayne, Caprice, El Camino (thru63), Impala, Station Wagon, Corvette 63-82; Chrysler “E” body 70-74;Chrysler “B” body 70-72; Chrysler “A” body 1973-76; Fairlane, Grand Torino,Torino, Ranchero 67-71; Mustang 64-66; Comet 66-77;BY9-8121G 4-1/2” .................................................. £16.94Above number fits- Mustang 79-93;BY9-8124G 3-9/16” ................................................ £16.94Above number fits- Mustang 94-04;BY3-8102G 1984-87; ............................................. £11.74Above number fits CorvetteBY3-8103G 1988-96; ............................................. £11.74Above number fits Corvette

BY9-8117G 2-5/8” .................................................. £17.29Above number fits- 1955-57 & 1971-90- Belair, Biscayne, Caprice, El Camino(thru 63), Impala, Station Wagon; Camaro/Firebird & Trans Am 1967-92;+73-77 Chevelle, Monte Carlo, Malibu & El Camino 64 up; Monza & Vega1971-80; Nova & Chevy 2- 1962-79; Mustang 67-73; Cougar 67-73; PontiacLeMans, GTO, Tempest 73-77; Bonneville, Catalina (Grand Prix to 81 only),Safari Wagon 71-81;BY9-8118G 2-7/8” .................................................. £17.65Above number fits- Camaro/Firebird & Trans Am 1993-02; +1964-72-Chevelle, Monte Carlo, Malibu & El Camino 64 up; Chrysler “B” body 65-69; Chrysler “A” body 65-72; Fairlane, Grand Torino, Torino, (Rancheroafter 15-3-72) 72-79; Galaxie 72-78; Thunderbird 72-79; Cougar 74-79;Pontiac Le Mans, GTO, Tempest 64-72;BY9-8119G 1958-64; 3-3/8” .................................. £17.65Above number fits- Belair, Biscayne, Caprice, El Camino (thru 63), Impala,Station Wagon.

Front Ant-Roll Bar Links

Polyurethane bushed front end links for anti-roll bar



Front Suspension

Anti-Roll Bar Bushes

Chevrolet Camaro-Nova & Chevy 2Polyurethane front anti-roll bar bushes

BY3-5202G 11/16” Bar .......................................... £18.04BY3-5203G 13/16” Bar .......................................... £18.04Above numbers fit- Camaro 67-69; Nova & Chevy 2 68-74

Anti-Roll Bar Bush Sets-with Brackets

Polyurethane Anti-Roll Bar Bush sets. Brackets are 4-1/2” long, by 1-3/8”wide, 1-3/4” high, 3/4” from centreline of hole for bar, to mounting face ofbracket. Mounting bolts centre to centre can be between 3-5/8” and 2- 9/16”[holes are slots].

BY9-5106G 3/4”- 19mm .............................. £16.78 setBY9-5108G 7/8”- 22mm .............................. £16.78 setBY9-5109G 15/16”- 24mm .......................... £17.12 setBY9-5110G 1”- 25mm .................................. £17.74 setBY9-5112G 1-1/8” - 28.5mm ....................... £17.74 setBY9-5113G 1-1/4” - 31.5mm ....................... £17.74 setBY9-5114G 1-5/16” - 33mm ........................ £17.12 set

HEIDTS FRONT SUSPENSION

Heidts were one of the first companies to make alternative crossmember based suspension assemblies, based on the 1974-78 Mustang II front suspension. Up until a few years ago, the Mustang II couldbe readily found in scrapyards, and it was a simple matter to “remove” the front suspension, and modify it to suit ones Hotrod. Nowadays, these cars are getting a bit thin on the ground. This is whereHeidts comes in [23 years in business], manufacturing cross members to fit many classic cars & trucks. If you have the suspension parts from a Mustang II, then these will fit the crossmember. Otherwise,you can buy all new components, with many different options. The Heidts front suspension design, follows faithfully, the design used by Ford Motor Company. This is because it is technically a very gooddesign. Ford got it right first time with this design, eliminating bumpsteer, and including built-in anti-dive into the design. Some of the other Mustang II based designs do not have these features. Hotrods& Custom/Street cars built these days, need to be safe, as more & more families have become involved, giving us a much greater responsibility. The car needs to handle and brake in safety, from speed.It is no good anymore having a car that will do 200mph in a straight line, but has poor brakes & suspension. Tailgating the family in a 2004 Mondeo on the M1 at 80mph, in your 1500bhp twin turbo ‘34Ford coupe, is not a good idea, unless you have brakes the equal of his. The Heidts front suspension cross-member is made in the USA, not China, and it is beautifully made, a work of art. I visited theHeidts factory, just north of Chicago, and was very impressed with the high quality of their work. I look forward to fitting one of these kits to my own car in the future.

FRONT SUSPENSION CROSSMEMBERS

Upper fender adapter brackets included. radiator tabs included.Must use-manual steering rack & narrowed suspension armsWeld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

Boxing plates included.Narrowed suspension arms recommended.Weld on engine mount brackets are avail-Ford V8 BYAJW335 & Chevy BYAJW450

BYPX-102-E Ford 1935-40 Car & ‘35-41 Pickup .. £383.63

BYPX-103-E Ford 1941-48 Car ............................. £383.63

Weld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

BYPX-104-E Ford 1948-52 F-1 Pickup .................. £401.21

Steering rack extensions requiredWeld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450


Steering rack extensions requiredWeld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

BYPX-105-E Ford 1953-56 F-100 Pickup .............. £383.63

Radiator mount included, must use manual steering rackWeld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

BYCX-101-E Chevy 1934-35 Standard Car ........... £401.21

Radiator mount included, must use manual steeringWeld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

BYCX-111-E Chevy 1934-36 Master Car ............... £401.21

BYCX-102-E Chevy 1937-39 Car ........................... £383.63

BYPX-101-E Ford 1933-34 Car ............................. £401.21


UNIVERSAL



Front Suspension

FRONT SUSPENSION CROSSMEMBERSBYCX-103-E Chevy 1940-48 Car ........................... £383.63

BYCX-104-E Chevy 1949-54 Car ........................... £383.63

“C” notched plates includedWeld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

BYCX-305-E Chevy 1937-39 Pickup ..................... £383.63






“C” notched plates included. Steering rack extensions required.Weld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450


56-1/2” track width crossmembers fit 24-30” frame rails.[outside to outside]. Thecrossmember & spring towers are made oversize to allow trimming & fitting to yourchassis. Templates & instructions, designed for a home builder to install.Weld on engine mount brackets are available-Ford V8 BYAJW335and Chevy V8 BYAJW450

BYKX-101-E Universal 56-1/2” track width .......... £416.88

BYPX-320-E Mustang 1964-70+ 67-70 Cougar .... £453.58Includes boxing plates that weld in place. 2” dropped spindlesrecommended for std ride height. Use a manual steering rack &rear sump. 351C will not fit. Weld on engine mount brackets areavailable-Ford V8 BYAJW335 & Chevy V8 BYAJW450

BYPX-330-E Ford Falcon 1960-65 ......................... £401.21

NOTE: Some 54’s were sold in ‘55 be sure of your model!

WHAT ELSE DO I NEED?SUSPENSION ARM KIT, BRAKE SYSTEM KIT, STEERING RACK KIT, SPRING & SHOCKABSORBER KIT,

SPINDLE/FRONT UPRIGHT KIT, BRAKE HOSE KIT, STEERING COLUMN CONNECTION PARTS [see S12/3],ANTI-ROLL BAR [option]

-all kits are pairs & include required hardware, everything is unpainted-

TUBULAR SUSPENSION ARM KITS [unpainted]choose one!

BYAJW545 Std arm kit ........................................ £534.26BYAJW560 Coil-over shock arm kit .................... £447.04Coil over shocks are more expensiveBYAJW580 Narrowed std arm kit [some Fords] .. £497.98BYAJW635 Narrowed coil-over shock arm kit ..... £469.42BYAJW550 Air-bag arm kit ................................. £540.44The above kit requires the Air-Bag installation pack BYAJW810

BRAKE SYSTEM KITS [unpainted]choose one!

BYAJW655 11” brake kit Chevy bolt circle ......... £377.84BYAJW685 11” brake kit Ford bolt circle ............ £298.70Chevy bolt cicle = 5 on 4-3/4”, Ford bolt circle = 5 on 4-1/2”BYAJW690 11” kit Chevy-Willwood blk callipers £545.77BYAJW695 11” kit Ford- Willwood blk callipers . £544.68Callipers are lighter [aluminium]. They are the 4 piston version

STEERING RACK KITS- choose one!

BYAJW710 Manual rack & pinion kit LHD ........ £187.06Use universal joint BYAJW750 with above rackBYAJW820 Manual rack & pinion kit RHD ........ £415.02Use universal joint BYAJW with above rackBYAJW715 Power rack & pinion kit LHD ........... £323.17Use universal joint BYAJW600 with above rack

SPRING & SHOCKABSORBER KITSchoose one!

BYAJW720 300lb springs & std shocks ............... £135.19BYAJW725 350lb springs & std shocks ............... £145.14Black springs fit between upper & lower arms with std shock through centre.No ride height adjustment, apart from correct pressure spring. 300lb is gen-erally for Small Block engine. 350lb for aluminium headed Big Block.BYAJW825 Spring spacers-3/4” ............................. £21.96prIf your vehicle is riding a bit low in the front, these spacers will lift theHeidts springs up around 3/4”.

BYAJW730 500lb springs & coil-over shocks ...... £432.47BYAJW735 500lb springs & adj coil-over shocks £574.40Springs mount on an adjustable platform on shockabsorber. This gives rideheight adjustment. 500lb is generally for Small Block. BYAJW730, is achrome shock with a chrome spring. BYAJW735 is a 10 position adjustablerebound damping billet aluminium shock with a chrome spring. A spanner toadjust the spring height is available under BYAJW405.

BRAKE HOSE KITSchoose one!

BYAJW590 For std Heidts brake kits ..................... £52.16Use with BYAJW655/685BYAJW740 For Heidts brake kits w/Willwood 14” £35.36Use with BYAJW690/695BYAJW745 For Willwood callipers 16” hose ......... £45.47

SPINDLE [FRONT UPRIGHT] KITSchoose one!

BYAJW700 Std height “Mustang II” .................... £204.90BYAJW705 2” drop “Mustang II” forged ............. £191.94On a Mustang, the 2” drop spindles are needed for “std” ride height

AIR BAG INSTALLATION PACKPicture shows more parts than in kit

BYAJW810 Heidts Air-Bag kit for BYAJW550 .. £343.46Use with BYAJW550 to finish air-bag type front end



Details asabove-


- SUSPENSION/STEERING/BRAKES/REAR AXLE -

Front Suspension

Chassis Stiffener Mustang 1964-70

BYAJW345 Chassis stiffener 64-70 ........... £211.13

This is another item that gives the unibody design added stiffnessfor performance use. Use with Heidts subframe connectors.

Pro-G Camaro Front Subframe Kit 1967-69Bolt on the best suspension possible for your Camaro/Firebird and Nova. HEIDTS now offer theirtrue bolt on Pro Touring full front subframe. Featuring their new Pro-G suspension package forunbelievable cornering & overall handling. Simply unbolt and remove your front sheetmetal, en-gine & trans, your old subframe, then slide in the new complete HEIDTS subframe. Reinstall yourmodified engine, the front end sheetmetal, and you are ready to “tear up the streets”, or maybe putup a good account of yourself, on a Track-Day at Brands or similar. With this subframe fitted, therear suspension “done”, and proper wheels & tyres, your Camaro will handle like a 600bhp Go-Kart!.This kit consists of- The Pro-G subframe, race car designed suspension, with adjustable [upper armonly] plain, tubular, suspension arms. 11” Wilwood disc brakes with plain discs & black calipers.Forged, 2” drop front spindles, power rack & pinion steering, aluminium coil over shocks withadjustable spring platforms & 10 position rebound adjustable damping, chrome front springs [SBC]450lbs & reversible multi-position transmission crossmember.

Forged Front Spindles 2” Drop

These front spindles are forged & are made from 1045 heat treated alloysteel. With the “stub-axle” repositioned to give a 2” drop, your suspensionangles remain as standard.

BYAJW390 2” drop spindles Camaro 67-69 ........ £303.10

Forged Front Spindles 2” Drop

These front spindles are forged & are made from 1045 heat treated alloysteel. With the “stub-axle” repositioned to give a 2” drop, your suspensionangles remain as standard. Includes calliper brackets.

BYAJW410 2” drop spindles Chevy 55-6-7 ......... £313.58

HEIDTS FRONT ANTI ROLL BARS

BYAJW435 1955-57 Chevy 1” diam+urethane .... £217.38BYAJW660* 1948-54 Ford Pickup +53-56 F100 .. £166.36BYAJW665* 1947-54 Chevy Pickup ..................... £157.37BYAJW310* 1964-70 Mustang+1967-70 Cougar . £197.38BYAJW370* 1967-81 Pro-G Camaro 1-1/4” ......... £273.00Above kit also works with 68-72 Nova

1” Dropped Coil Springs Chevy 55-6-7

BYAJW430 1” lower spring Chevy 55-6-7 ........... £108.13

To give your shoebox an even lower look, add these Heidt 1” dropped coilsprings. Combined with the 2” dropped spindles, they will put your cruiser afull 3” in the weeds safely & easily.

AirRide Air-Spring Conversion Kit

BYAJW465 AirRide conv’ kit [Must II] ............... £115.69

If you already have a Mustang II based front suspension, this kit will enableyou to fit the AirRide type of air springs. Of course you will need many otherparts as well, including a compressor kit.

S12/7 S12/7

Mustang 1964-70 Inner Wing Panels

BYAJW315 Inner wing panel 64-66 Mustang ........ £66.17BYAJW320 Inner wing panel 67-70 Mustang ........ £64.78

Use when fitting the Heidts front subframe kit. Remove the oldpanels, and replace with these.

BYAJW355 Camaro f/s/frame kit 67-69 ......... £4237.25

Pro-G Camaro Front Subframe Kit 1967-69

These anti-roll bar kits come complete with all parts required to fit. Assists inkeeping your car/truck sitting flat through the corners. If marked with * thenonly works with Heidts Must II, or Pro-G front end kit.

S12/8 S12/8



Steering

Hook-up Kit Heidt Power Steering Valve

BYAJW460 Hookup kit Heidts pwr stg valve ......... £62.64

Kit of parts to help you install the Heidt adjustable power steer-ing valve.

Heidt Adjustable Power Steering Valve

BYAJW455 Adjustable power steering valve ......... £88.93

Tune your power steering, with the Heidt patented adjustable power steeringvalve. It allows you to set or tune the “feel” of your power steering, with justthe turn of a knob. Turning the knob anticlockwise reduces the pressure tothe rack, which would tighten up the “feel” of the steering.

STEERING

Extension Kits 4”-Steering Rack

These extensions are required on some Heidt front crossmember kits.

BYAJW470 4” extensions manual Heidt rack ........ £66.10BYAJW475 4” extensions power Heidt rack .......... £65.81

BRAKES-not std

Mustang Master Cylinder/Servo

BYDB-106 Master cyl/servo Mustang 64-66 ...... £234.19Above item pictured to the right. NOT ASSEMBLED.BYAJW330 Master cyl/servo Mustang 67-70 ...... £528.84 SP

Camaro Dual Master Cylinder/Servo

BYAJW400 Dual m/cyl & servo 67-69 ................. £399.17BYDB-118 Dual m/cyl & servo 70-81 ................. £241.50

This is a complete 1” bore dual master cylinder together with abrake servo or booster, for disc/drum setups. These kits comecomplete with a proportioning valve. NOT ASSEMBLED.

Chevy 55-6-7 Dual Master Cylinder/Servo

This is a complete dual master cylinder together with a brakeservo or booster, for disc/drum setups. These kits come completewith a piped up proportioning valve.

BYAJW415 Dual m/cyl & servo 55-57 ................. £485.77

Adjustable Brake Proportioning Valve

BYAJW445 Adj’ brake proportioning valve ........... £76.28

An adjustable brake proportioning valve is used to balance frontand rear brake pressures, especially in disc/drum combinations.

Wilwood 11” Disc Brakes kit Black Callipers

BYAJW395 11” Disc brake kit Camaro 67-69 ..... £811.87

This kit has plain discs, with black callipers. The kit fits the 2”drop Heidt spindles.

Disc Brake Kit 55-57 Chevy with Std Spindles

BYAJW425 Disc brake kit 55-57 Chevy std ........ £355.87

This kit gives you all the parts required to upgrade your Chevy 55-57to disc brakes at the front. Making your car a whole lot safer.

55-57 Chevy Disc Brake Kit for 2” Drop Uprights

BYAJW420 Disc brake kit for 2” drop 55-57 ....... £282.80

This disc brake kit give you the parts required for the 55-57 Chevy, to enableyou to install disc brakes at the front, when you have the Heidt 2” drop frontuprights.

This is a complete dual master cylinder together with a brakeservo or booster, for disc/drum setups. These kits come completewith proportioning valve.

Power Steering Pipe Kit

Kit of parts to help you connect the Heidts power steering rack,Heidts adjustable valve, & the GM integral tank, power steeringpump.

BYAJW575 Power steering pipe kit ..................... £187.28

Rear Brake residual Pressure Valve

Used to maintain pressure in rear drum brake pipes/hoses.

BYAJW570 10 lb residual pressure valve ............... £25.31

BY20240702 4” up to 780lb 4.1” stroke ................. £627.76Compressed: 10.66” // Ride Height: 13” // Extended: 14.76”BY20250702 4” up to 780lb 5” stroke .................... £627.76Compressed: 11.56” // Ride Height: 14.5” // Extended: 16.56”BY20240802 5” up to 1200lb 4.1” stroke ............... £627.76Compressed: 10.66” // Ride Height: 13” // Extended: 14.76”BY20250802 5” up to 1200lb 5” stroke .................. £627.76Compressed: 11.56” // Ride Height: 14.5” // Extended: 16.56”

S12/9 S12/9



-Rear Suspension-

HEIDTS 4 BAR- CHEVY CLASSIC TRUCK

Replaces old leaf springs. Gives a much better ride, & better cornering.Will need Panhard rod, coil overs & coil springs

HEIDTS REAR SUSPENSION

PANHARD ROD FOR HEIDTS 4 BAR

Required for Heidts 4 bar for Classic Truck. Weld on.

BYAJW780 Weld on-except ‘47-54 Chevy ............ £95.98BYAJW785 Weld on- 1947-54 Chevy only ............ £95.98

REAR COIL SPRINGS

For use with Heidts 4 bar rear for Classic Truck

BYAJW795 11” black rear coil springs 250lb ........ £97.70BYAJW800 11” black rear coil springs 300lb ........ £97.70

BYAJW755 Chevy p/up 1947-53 weld in ............ £544.49BYAJW760 Chevy p/up 1954-55 weld in ............ £544.49BYAJW765 Chevy p/up 1955-59 weld in ............ £544.49

HEIDTS 4 BAR- FORD CLASSIC TRUCK

Replaces old leaf springs. Gives a much better ride, & bettercornering. Will need Panhard rod, coil overs & coil springs

BYAJW770 Ford p/up 1953-54 F100 weld in ...... £544.49BYAJW775 Ford p/up 1955-56 F100 weld in ...... £544.49

REAR COIL OVERS HEIDTS CLASSIC TRUCK

4 BAR

BYAJW790 Black- non adj damping .................... £242.45

HEIDTS REAR 4 BAR KITS

This is a bolt on kit [apart from the rear axle case brackets]complete with coil overs and springs. Does not include axlehousing.

BYAJW340 Mustang 1964-70 ............................ £1145.65BYAJW375 67-69 Cam/F-bird+Nova 68-72 ....... £1114.82

REAR ANTI-ROLL BAR KITS

BYAJW440 Chevy 55-57 std suspension only ..... £171.85Above kit has a 7/8” diameter bar with Urethane bushesBYAJW385 Camaro 67-69 with Heidts 4 bar ....... £201.96BYAJW815 Street Rod-universal Heidts .............. £251.54

AIR-RIDE REAR SUSPENSION

AIR4LINK REAR 4 BAR KITS

Here are some advantages of the rear “Air4Link”. Superior ride quality, Rubberbushes eliminate poly bushing squeak & improve ride quality, Allows maxi-mum suspension travel & tighter wheel to inner wing clearances, Highlyadaptable to most vehicles, Simple, straightforward installation, .219” walldirect threaded DOM tubing for maximum strength, .188” wall alloy steelbrackets are CNC lasercut & folded for strength & accuracy. As to whichversion you should use, this boils down to how much space is available. Thetriangulated version is more suitable is you have very little clearance aroundthe tyre. Welding & basic fabrication skills are needed. Rear “springs” areextra.

BY18987999 Triangulated 4 bar kit ........................ £470.82BY19998801 Parallel 4 bar kit with panhard rod .... £575.45

UNIVERSAL REAR BLACK SHOCKWAVESHere is some information on the Black, non adjustable, shockwave. The ride heightof the Shockwave is much more important than the air pressure it runs at. EveryShockwave has an optimal ride height. The further you deviate from this intendedride height, the more ride quality & handling performance will suffer. If run too low,the Shockwave and/or suspension may bottom out. If run too high, the excessiveair-pressure will create a stiff ride, and you may “top out” the Shockwave. In gen-eral a longer Shockwave will give more suspension travel. this will give better ridequality because the vehicle has more distance to absorb road bumps. The heavierthe vehicle, the more important this becomes. Sold in pairs.

BY90000034 Shock bracket-rear upper ....... £15.70BY90001928 4 link mount-lwr rear w/bolts . £78.48

Brackets/mounts for Shockwave.

REAR SHOCKWAVE BRACKET/MOUNT

Subframe Connectors Mustang-Coupe 1964-70

Bolt on subframe connectors help eliminate bending, flexing &cracking of spot-welded sheet metal panels. They also tie the front& rear frames together creating a solid platform for increasedperformance levels. For use with Heidts rear 4 bar kit.

BYAJW350 Subframe connectors 64-70 .............. £187.28

Subframe Connectors Camaro 67-69 Coupe

For use with the Pro-G front subframe kit. Bolt on subframe connectors helpeliminate bending, flexing & cracking of spot-welded sheet metal panels.They also tie the front & rear frames together creating a solid platform forincreased performance levels.

BYAJW380 S/frame connectors Camaro Pro-G ... £162.89

S12/10 S12/10



-Air-Suspension Control-Tanks/Pumps etc- Air-Ride Front Suspension

MANUAL AIR-RIDE SYSTEM

The original RidePro system utilizes a quality solenoid air valve system &dependable electric components to provide simple, & reliable control. Con-trol panel provides simple & accurate inflate / deflate control for eachairspring. Vehicles up to 3500lbs. Rise time 3-5 seconds. 327 Thomas com-pressor, ARV4000 airvalve, 1/4” airline & fittings, electronic control.

BY30154000 Manual system- 3 gallon tank ......... £1150.88

AIR-RIDE FRONT SUSPENSION

AIR-RIDE TANKS/PUMPS etc

RidePROe3 AIR-RIDE SYSTEMThe RidePROe3 system provides automatic adjustment with the use of anECU & digital display. Rise time 3-5 seconds. [BY30334100 3 seconds]. 2-327 Thomas compressors, ARV4000 airvalve, 1/4” airline & fittings, elec-tronic control. Relies solely on air pressure sensors for each spring, to adjustthe ride height. Three presets. LevelPRO height sensors available also.

BY30334000 RideproE3 >3500lb- 3 gallon tank . £1569.38BY30334100 RideproE3 >4500lb- 5 gallon tank . £1778.63

RidePROe3 REMOTE CONTROL

Remote control option with two “key fobs”.

BY31008500 E3 remote kit .................................... £156.95

AIR-LINE CUTTER

BY90001081 Tubing cutter- get those “square ends” £13.08


Rear Axle

Diff Carrier Gasket

BYP27857 GM 10 bolt £3.53BYP27944 GM 12 bolt £3.14BYP27807 8” Ford £4.24BYP27929 9" Ford £3.66

FORD RACING Small Parts Kit

Kit includes:- Pinion nut, O-ring, collapsible spacer, gear markingcompound, brush, and shims to set pinion gear depth.

BYM-4663-A100 Ford 9" .......................................... £26.78

ARP Ring Gear Bolt Kit

For Ford 9", 7/16" x 0.935". Special hardened, precision groundwashers are included. 190,000 PSI. Sprint car drive pins.

BYRGB-4 Ring gear bolt kit ................................ £26.76 kit

Motive Gear Hi-Performance Ring & PinionsDesigned for street use and equally at home on the drag strip and oval track.

Motive Gears allow tailoring of differentials to suit your specific needs.

Installation KitsMotive Gear installation kits provide most of the parts required for acrownwheel & pinion change. Kit contents vary. Ask salesperson for exactcontents of the kit you require.

BYR9RMK Ford 9" .............................................. £114.67 kit

FORD- 9"

10 Bolt - 9.00" dia. ring gear, 1.313" dia. pinion stem.

BYF9-325* Ratio: 3.25 Teeth: 39-12 .................. £186.92BYF9-350* Ratio: 3.50 Teeth: 35-10 .................. £176.83BYF9-370* Ratio: 3.70 Teeth: 37-10 .................. £186.92BYF9-389* Ratio: 3.89 Teeth: 35-9 .................... £188.68BYF9-411* Ratio: 4.11 Teeth: 37-9 .................... £181.75BY890430# Ratio: 4.30 Teeth: 43-10 .................. £183.24BYF9-486* Ratio: 4.86 Teeth: 34-7 .................... £167.50

* 8620 Steel, Street gears# 8620 Steel, Performance gears, double lapped & deburred


Rear axle

s12/1 s12/1 …file.seekpart.com/keywordpdf/2011/3/22/20113227518113.pdfrear suspension original...

Documents