s16-3100-cd issue: 11/06/2016 page: 1 of 4 cg · 1280 i/d 24 no. Ø13 holes on 1330 pcd pgldphwhu...
TRANSCRIPT
1.5m diameter 12 sided sump with reverse flange, corbel, adjustable height skirt, internal lid with dip tube hole, and round 1020mm flat sealed cover and frame with central dip cover.
S16-3100-CD Issue: 11/06/2016 Page: 1 of 4
For reference purposes only. This drawing is not a specification. Order against product code only. To enable continuous improvement of our products, the designs and specifications are subject to change without notice.
© Copyright
1.5m diameter 12 sided sump with reverse flange, corbel, adjustable height skirt, internal lid with dip tube hole, and round 1020mm flat sealed cover and frame with central dip cover.
S16-3100-CD Issue: 11/06/2016 Page: 2 of 4
For reference purposes only. This drawing is not a specification. Order against product code only. To enable continuous improvement of our products, the designs and specifications are subject to change without notice.
© Copyright
SELF LEVELLINGADHESIVE SEALANT
(FOR USE ON HIGH WATERTABLE APPLICATIONS)
SPOUT
CONDENSATION BOTTLE
BOTTLE CARRIER
FL100-CD COVER
DIP COVER
FL100 FRAME
FL100-SK250
S-LID-ROUND-CD
S16-3100-CORBEL
S16 CHAMBER
HANGER
FOAM BLOCK
1.5m diameter 12 sided sump with reverse flange, corbel, adjustable height skirt, internal lid with dip tube hole, and round 1020mm flat sealed cover and frame with central dip cover.
S16-3100-CD Issue: 11/06/2016 Page: 3 of 4
For reference purposes only. This drawing is not a specification. Order against product code only. To enable continuous improvement of our products, the designs and specifications are subject to change without notice.
© Copyright
350
MAX. 300MIN. 200
25
90
862
175
Max. 1537Min. 962
1516 A/F
300
175MAXIMUM TRIM POINT
MAXIMUM TRIM POINT
1020965
1500 A/F
1280 I/D
24 NO. Ø13 HOLES ON 1330 PCD
1.5m diameter 12 sided sump with reverse flange, corbel, adjustable height skirt, internal lid with dip tube hole, and round 1020mm flat sealed cover and frame with central dip cover.
S16-3100-CD Issue: 11/06/2016 Page: 4 of 4
For reference purposes only. This drawing is not a specification. Order against product code only. To enable continuous improvement of our products, the designs and specifications are subject to change without notice.
© Copyright
VERY IMPORTANTThe underside of the framemust be adequatelysupported by concrete.
Expansion joint filledwith petrol resistantmastic.
Concrete reinforcedwith 2 layers of reinforcement mesh.
Joint tied with600mm long x 12mmdowel at 600mm c/c.Half bonded
300mm5 - 10mm
"A"
500mm
OUTER EDGE "A" OF FRAME SET 5 - 10MM ABOVE GENERAL FORECOURT AREA WITHCONCRETE RAMPED AWAY OVER 300MM.
VERY IMPORTANT
TARMACADAM
SETTS
TARMACADAM CONCRETE PEA GRAVEL SAND
Minimum200mm
Maximum350mm
CONCRETE
TYPICAL INSTALLATION
ALTERNATIVE INSTALLATION ADVICE
Minimum200mmMaximum350mm
300
500
25
SETTS
130
150
A
Minimum200mmMaximum350mm
3005
5
TARMACADAM (THICKNESS AS SPECIFIED)
500
25
A
CORBEL
S16 CHAMBER
FL100CF COVER