sa v antl ab .c om laboratory testing services · 2021. 1. 26. · • astm d2272 rotating pressure...

S A V A N T L A B . C O M

Technical expertise in the

advancement of lubrication

technology for over 50 years

Laboratory Testing Services Complete overview of tests

ISO 9001:2015 QMS CERTIFIED

ISO/IEC 17025:2017 ACCREDITED

ASTM PROFICIENCY TESTING

PROGRAM PARTICIPANT

S A V A N T L A B S

Lab Testing Service - General Policy Information

Tests by Method

Tests in Alphabetical Order

API SN, ILSAC GF-5 / GF-5 PLUS & SAE J183

API SP, ILSAC GF-6A / GF-6B & SAE J183

API CK / FA-4

Engine Oil Tests

Automatic Transmission Fluid (ATF) Tests

Condition Monitoring Tests

Diesel Fuel Tests

Elastomer Compatibility Tests

Electrical Insulating Fluid Tests

Gear Lubricant Tests

Grease Tests

Hydraulic Fluid Tests

Marine Lubricant Tests

Marine Fuel Tests

Turbine Lubricant Tests

Tests by Category - Viscosity

Tests by Category - Wear/Performance / Simulation

Tests by Category - Oxidation

Tests by Category - Physical Properties

Tests by Category - Molecular Characterization

NORM KANAR

MARKETING AND SALES MANAGER

[email protected]

P: 989-496-2301

4800 JAMES SAVAGE RD.

MIDLAND, MI, USA 48642

0305121920212224252627282930323334353637383941

Table of Contents

S A V A N T L A B S

General Policy InformationQuality Control and AssuranceSavant is ISO 9001 quality system certified and ISO/IEC17025:2017 Accredited for specific tests. The laboratory also participates in the ASTM Test Monitoring Center (TMC) calibra-tion program for bench tests, the ASTM Proficiency Testing Program, and the European CEC annual round-robins where appropriate.

Savant is proud of its testing quality and accuracy. Tests will be rerun upon request to confirm data accuracy. If rerun test results fall within repeatability of original test results, both original and rerun tests will be billed to the customer. If rerun test results are not repeatable with original test results, subsequent analysis will be conducted to determine the source of error, accurate results will be reported to the customer, and only one test will be billed to the customer.

Interpretation and ConsultingAs a research and testing laboratory, Savant is particularly well qualified to offer interpre-tation of test results and technical advisory services regarding lubricant performance, formulation or applications. We specialize in solving problems related to the measure-ment of critical lubricant properties. Services should be arranged in advance and are provided at a reasonable additional charge beyond the testing fee.

Test Authorization FormClients are asked to enclose a copy of the Savant Test Authorization Form with every set of samples sent to Savant Labs for testing.

SavLab Test MethodsSome test methods have been developed at SAVLAB to provide special test information to our clients that may be unavailable from other sources. These internal test methods carry a SAVLAB method identification.

Test ResultsSavant provides test results in tabular and/or graphical form as appropriate to an effec-tive use of the data by our clients. Data is transmitted to clients by Email. Test results can also be transferred directly into Client databases by EDT (electronic data transfer) upon request. Results are considered owned by the party purchasing the testing, and the signer of the TAF must authorize releasing the test results to additional parties.

Sample and Data StorageClient oil and grease (non-flammable) samples submitted for testing are kept on site for a minimum of one year from date of receipt. Sample retains from fuels and other flamma-ble samples will be disposed of upon final report completion. Other arrangements can be made for the storage or return of non-flammable lubricant samples at the client’s request. Copies of reports and raw test data are kept by Savant Labs for a minimum of five years.

0 3(General Policy Information continued on next page)

Test FeesOur fee structure is designed to give clients a choice depending on the urgency of testing requested. The turnaround times listed below apply to most tests, although certain specialized analyses may require additional time, which will be brought to your attention at the time the testing is requested.

Standard Service: Delivery of data to client by fax or email within ten working days of receipt of sample. A final report will be e-mailed.

Expedited Service: Delivery of data to client by phone, fax or email within five working days. Expedited service is not available for all tests. A final report will be e-mailed. (30% Surcharge)

Rush Service: Delivery of data to client by phone or email within three working days. Some tests require more time to complete and are not able to be included in our rush service. A final report will be e-mailed. (50% Surcharge)

24 hr. Service: Delivery of data to client by phone or email within 1 business day of receipt of sample. This service must be specifically scheduled by phone and is only available for certain tests. Please call to schedule. A final report will be emailed. (100% Surcharge)

DiscountsThe following discounts apply per single purchase or single release against a blanket purchase order. Testing projects requiring expedited and RUSH service are not subject to discounts.

Multiple Oils: 10% Discount --Six to eleven oils receiving the same test. 20% Discount --Twelve or more oils receiving the same test.

Sampling SuppliesPlastic sample bottles with shipping boxes can be purchased for $5 each. Please specify bottle size.

Re-usable pump with 100 feet of disposable plastic tubing can be purchased for $120. Additional plastic tubing can be purchased for $25 / 100 feet.

Payment TermsNet 30 days with approved credit. A purchase order is required unless other arrangements have been made. A late payment charge of 1.5% per month (18% annual rate) may be applied to past due invoices.

Payments should be made payable and mailed to:

SAVANT, INC.

4800 JAMES SAVAGE RD.

MIDLAND, MI 48642 USA

MasterCard, Visa, Discover, and American Express credit cards are also accepted. Orders paid by a credit card will be

charged a 3.5% transaction fee.

04

A W O R L D O F L U B R I C A T I O N U N D E R S T A N D I N G ®

[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D86 Modified Distillation by Gas Chromatograph 400 mL

• ASTM D92 Fire Point, Cleveland Open Cup 250 mL• ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 mL• ASTM D92 Flash Point, Cleveland Open Cup 250 mL• ASTM D93 Flash Point, Pensky-Martins Closed Cup 250 mL

ASTM D94 Saponification Number 25 g• ASTM D97 Pour Point 100 mL

ASTM D130 Copper Strip Corrosion 100 mLASTM D156 Color (Saybolt Chromometer Method) 250 mLASTM D189 Carbon Residue, Conradson 50 mLASTM D217 Cone Penetration, Unworked and 60 Strokes (Grease) 800 gASTM D240 Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) 20 mLASTM D287 API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) 250 mLASTM D323 Reid Vapor Pressure 125 mLASTM D381 Gum Content of Gasoline (Washed and Unwashed) 50 mL

• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, Below 0°C 125 mL• ASTM D445 Kinematic Viscosity, Used or In-Service Oil 125 mL

ASTM D482 Total Ash 80 gASTM D524 Carbon Residue, Ramsbottom 50 mLASTM D525 Oxidation Stability (Gasoline) 200 mLASTM D566 Dropping Point Grease 50 gASTM D611 Aniline Point 100 mLASTM D613 Cetane Number 1 L

• ASTM D664 Acid Number 50 mLASTM D665 Rust Prevention 4 Hours (Method A or B) 1 LASTM D665 Rust Prevention 24 Hours (Method A or B) 1 L

• ASTM D874 Sulfated Ash 50 gASTM D877 Dielectric Breakdown Voltage 800 mL

• ASTM D892 Foaming, Sequence I - III (Specify Option A if Required) 1 L• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify Option A if Required) 1 L

ASTM D893 Insolubles, Pentane 25 mLASTM D924 Dissipation/Power Factor 500 mLASTM D942 Oxidation Stability (Grease) 100 Hours 150 mLASTM D943 Oxidation Characteristics (2.0 TAN or 1000 Hours) 600 mLASTM D943 Oxidation Characteristics (2.0 TAN or 2000 Hours) 600 mLASTM D943 Oxidation Characteristics (2.0 TAN or 3000 Hours) 600 mLASTM D972 Evaporation Loss (Grease) - Specify Time and Temperature 150 mLASTM D974 Acid Number 50 mLASTM D974 Base Number 50 mLASTM D976 & D4737 Cetane Index (Calculated from D1298 and D86) 500 mLASTM D1084 B T-Bar Viscosity VariesASTM D1092 Apparent Viscosity, Grease 500 gASTM D1177 Freeze Point 100 mLASTM D1120 Boiling Point of Coolants 100 mLASTM D1218 Refractive Index 20 mLASTM D1264 Water Washout (Single Bearing/Single Temperature) 50 gASTM D1264 Water Washout (Two Bearings Per Method/Single Temperature) 100 gASTM D1298 Density / API Gravity, Hydrometer 350 mLASTM D1319 Hydrocarbon Type 40 mL

Tests by Method Gold bullets indicate ISO/IEC 17025:2017 Accreditation

05


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D1331 Surface Tension 100 mLASTM D1401 Emulsion Characteristics, Water Separability 100 mLASTM D1403 Cone Penetration, 1/4 or 1/2 Scale 100 gASTM D1404 Harmful Particles in Grease 30 gASTM D1478 Low Temperature Torque 10 gASTM D1500 Color 150 mLASTM D1533 Water in Insulating Liquids by Coulometric Karl Fischer Titration 100 mLASTM D1662 Sulfur, Active 100 gASTM D1742 Oil Separation, Storage of Greases 300 gASTM D1743 Rust Prevention Properties of Grease 50 gASTM D1748 Rust Protection by Humidity Cabinet 1 LASTM D1768 Water and Sediment for Opaque or In-Service Oils 100 mLASTM D1831 Roll Stability of Grease 100 gASTM D1957 Hydroxyl Number 25 mLASTM D2007 Clay Gel Analysis 100 mLASTM D2008 UV Absorbance to Absorptivity 10 mLASTM D2070 Thermal Stability (Hydraulic Fluids) 300 mLASTM D2112 Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C 150 mLASTM D2155 Auto-Ignition Temperature (Hydraulic Fluids) 10 mLASTM D2265 Dropping Point 50 gASTM D2266 Four Ball Wear (Grease) 100 g

• ASTM D2270 Viscosity Index (Includes D445 at 40°C and 100°C) 125 mL• ASTM D2272 Rotating Bomb Oxidation Test (RBOT) Single Run 150 mL• ASTM D2272 Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run 150 mL• ASTM D2272 RPVOT, Run to End-of-Test, Hard Break 150 mL

ASTM D2273 Trace Sediment 200 gASTM D2274 Oxidation Stability (Petroleum Fuel Oil) 2 LASTM D2500 Cloud Point 100 mLASTM D2509 Timken OK Load for Grease (Specify Starting Load) 3400 gASTM D2532 Viscosity Stability at Low Temperature 125 mLASTM D2595 Evaporation Loss, Grease, Wide Temperature Range 25 gASTM D2596 Four Ball Extreme Pressure (Grease) Up to 400 kg 500 gASTM D2596 Four Ball Extreme Pressure (Grease) Above 400 kg 500 gASTM D2603 Sonic Shear, Oils 100 mLASTM D2619 Hydrolytic Stability 250 mL

• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mLASTM D2670 Falex Pin & Vee Wear 200 mLASTM D2699 Octane Number (Research Rating) 800 mLASTM D2700 Octane Number (Motor Rating) 800 mLASTM D2709 Water and Sediment 100 mLASTM D2711 Demulsibility - Procedure A (No EP Additives) 2 LASTM D2711 Demulsibility - Procedure B (Contains EP Additives) 2 LASTM D2714 Block on Ring Friction and Wear 200 mLASTM D2717 Thermal Conductivity - Single Temperature 100 mLASTM D2782 Timken Extreme Pressure (Specify Starting Load) 4 LASTM D2783 Four Ball Extreme Pressure Up to 400 kg. 200 mLASTM D2783 Four Ball Extreme Pressure Above 400 kg. 200 mLASTM D2879 Vapor Pressure by Isoteniscope, Single Temperature 10 mLASTM D2879 Vapor Pressure by Isoteniscope, Multiple Temperatures 10 mL

• ASTM D2887 Gas Chromatography - Carbon Distribution Extended 10 mLASTM D2893 Oxidation Characteristics Extreme Pressure 500 mL

• ASTM D2896 Base Number 50 mL


06


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D2982 Glycol-Base Antifreeze in Used Oils 20 mL

• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mLASTM D3233 Falex Extreme Pressure 200 mLASTM D3238 Carbon Distribution Analysis 250 mLASTM D3336 High Temperature Bearing Performance Up to 600 Hours 50 gASTM D3427 Air Release, Gas Bubble Separation 500 mLASTM D3520 Quenching Time 600 mL

• ASTM D3524 Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) 10 mL• ASTM D3525 Fuel Dilution, Gasoline 10 mL

ASTM D3527 High Temperature Life, Wheel Bearing Grease 120 gASTM D3703 Peroxide Value 200 mLASTM D3704 Oscillation Friction Wear, Grease 20 g

• ASTM D3829 Mini-Rotary Viscosity (MRV), Single Temperature 200 mLASTM D4048 Copper Strip Corrosion, Grease 100 gASTM D4049 Resistance of Lubricating Grease to Water Spray 25 gASTM D4052 Specific Gravity (Includes API Gravity) 50 mLASTM D4170 Fretting Wear, Grease 40 gASTM D4172 Four Ball Wear 100 mLASTM D4287 High-Shear Viscosity Using a Cone/Plate Viscometer 10 mLASTM D4289 Elastomer Compatibility NBR L and CR Grease 400 gASTM D4289 Elastomer Compatibility NBR L or CR Grease 200 gASTM D4290 Leakage of Wheel Bearing Grease 200 gASTM D4291 Glycol 5 mLASTM D4294 Sulfur by XRF - Energy Dispersive 10 mLASTM D4310 Sludging & Corrosion Tendency Up to 1000 Hours 1 LASTM D4530 Carbon Residue, Micro 150 mL

• ASTM D4629 Nitrogen by Chemiluminescence 30 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, Used Oil 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Multi-Temp., Multi-Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Temperature 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Below 50°C 150 mL• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mL

ASTM D4693 Low Temperature Torque, Wheel Bearing Grease 50 gASTM D4737 Cetane Index (Calculated from D1298 and D86) 500 mL

• ASTM D4739 Base Number 20 mLASTM D4742 Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils 50 mLASTM D4927 Sulfur Content for Automatic Transmission Fluid by XRF 30 mL

• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals (No S) 10 mL• ASTM D5133 Gelation Index 50 mL• ASTM D5133 Scanning Brookfield Viscosity (-5°C to -40°C) 50 mL• ASTM D5133 Scanning Brookfield Viscosity, Extended Temperature Range 50 mL

ASTM D5182 FZG Gear Test - Up to 12 Stages 2 LASTM D5182 FZG Gear Test - Up to 14 Stages 2 LASTM D5183 Coefficient of Friction by Four Ball 100 mL

• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D5185 Sulfur by Elemental Analysis by Inductively Coupled Plasma 10 mL

ASTM D5186 Aromatics in Diesel Fuel 150 mLASTM D5275 Fuel Injector Shear Stability (FISST), 20 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), 30 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), 40 Passes 500 mL


07


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D5275 Fuel Injector Shear Stability (FISST), Other Passes 500 mLASTM D5291 Carbon, Hydrogen and Nitrogen Content 30 mLASTM D5291 Nitrogen - Carlo Erba 30 mL

• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5293 Mod. Cold Cranking Simulator, Temperature Scan 120 mL• ASTM D5453 Sulfur 10 mL• ASTM D5453 & D5762 Sulfur and Nitrogen Package 20 mL

ASTM D5483 Oxidation Stability of Greases by PDSC 10 gASTM D5554 Iodine Value 60 mLASTM D5620 Drain and Dry Mode Using Falex Pin & Vee Block Test Machine 100 mLASTM D5621 Sonic Shear, Hydraulic Fluids 100 mLASTM D5706 Extreme Pressure Properties Using SRV, Procedure A 20 gASTM D5706 Extreme Pressure Properties Using SRV, Procedure B 20 gASTM D5707 Friction and Wear Properties Using SRV 20 g

• ASTM D5762 Nitrogen 10 mLASTM D5769 Benzene, Toluene, Total Aromatics by GC/MS 10 mL

• ASTM D5800 Noack Volatility 150 mLASTM D5827 Sulfate Analysis (SO4) 30 mLASTM D5969 Corrosion-Preventive, Dilute Synthetic Sea Water Environments 30 gASTM D5972 Freeze Point 100 mLASTM D6079 Lubricity by HFRR 10 mL

• ASTM D6082 Foaming, Sequence IV (Specify Option A if Required) 1 LASTM D6130 Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements 10 mLASTM D6138 Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) 40 gASTM D6184 Oil Separation Percent, Wire Cone Method 100 gASTM D6186 Oxidation Induction Time by PDSC 20 mLASTM D6200 Cooling Curve Analysis of Quench Oils 1.5 LASTM D6217 Particulate Contamination for Diesel Fuels 1 L

• ASTM D6278 Kurt Orbahn Shear Stability, 30 Passes 1 L• ASTM D6278 Mod. Kurt Orbahn Shear Stability, 100 Passes 1 L• ASTM D6278 Mod. Kurt Orbahn Shear Stability, Custom Number of Passes 1 L• ASTM D6278 Mod. Kurt Orbahn Shear Stability, 90 Passes 1 L• ASTM D6304 Water by Karl Fischer 100 mL• ASTM D6335 Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) 250 mL

ASTM D6371 Cold Filter Plug Point 150 mLASTM D6375 Noack Volatility by TGA 20 mL

• ASTM D6417 Simulated Distillation by Gas Chromatography 10 mL

ASTM D6425 Friction and Wear Properties of Extreme Pressure (Ep) Lubricating Oils Using SRV 100 g

• ASTM D6443 Chlorine by XRF 30 mLASTM D6557 Ball Rust Test 125 mLASTM D6560 Asphaltene Content 25 gASTM D6594 High Temperature Corrosion Bench Test at 135°C 300 mL

• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, New Oil 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Other Shear 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Used Oil 150 mL

ASTM D6793 Bulk Modulus, Up to 80°C 200 mLASTM D6794 Engine Oil Water Tolerance (EOWT) 1 LASTM D6795 Engine Oil Filterability (EOFT) 1 LASTM D6922 Homogeneity & Miscibility 300 mL

• ASTM D7097 Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) 50 mLASTM D7098 Thin Film Oxygen Uptake Test (TFOUT) Catalyst B 50 mL


08


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D7109 Kurt Orbahn Shear Stability - Includes 30 and 90 Passes 1 L

ASTM D7214 FTIR Analysis, Oxidation by Peak Area Increase 50 mL• ASTM D7216 GF-5 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 HDD Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 HDD Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 HDD Elastomer Compatibility, MAC, Vamac 1.2 L• ASTM D7216 HDD Elastomer Compatibility, NBR, Nitrile 1.2 L• ASTM D7216 HDD Elastomer Compatibility, VMQ, Silicone 1.2 L

ASTM D7217 Extreme Pressure Properties of Solid Bonded Films Using a High-Fre-quency, Linear-Oscillation SRV 100 g

ASTM D7317 Pentane Insolubles by Filtration 25 mLASTM D7321 Particulate Contamination for Biodiesel Fuels 1 LASTM D7371 FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil 100 mL

• ASTM D7412 FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear 50 mL• ASTM D7414 FTIR Analysis, In-Service Fluid, Oxidation 50 mL• ASTM D7415 FTIR Analysis, In-Service Fluid, Sulfate Content 50 mL

ASTM D7420 Tribomechanical Properties of Grease Lubricated Plastic Socket Suspen-sion Joints Using a High-Frequency, Linear-Oscillation SRV 100 g

ASTM D7421 Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation Using SRV 100 g

ASTM D7462 Oxidation Stability (Biodiesel) 2 LASTM D7462 Oxidation Stability (Biodiesel - B100 Option) 2 LASTM D7563 Emulsion of Water and Simulated Ed85 Fuel 500 mLASTM D7594 Fretting Wear, High Hertzian, High-Frequency, Linear-Oscillation (SRV) 50 g ASTM D7619/ISO 4406 Particle Count and Sizing 500 mL

• ASTM D7624 FTIR Analysis, In-Service Fluid, Nitration 50 mL• ASTM D7844 FTIR Analysis, In-Service Fluid, Soot 50 mL

ASTM D8022 Roll Stability, Presence of Water 454 gASTM E659 Auto-Ignition Temperature, Liquid Chemicals 10 mLASTM E1131 TGA Soot 5 mLASTM E1269 Specific Heat 100 mLASTM E1858 Oxidation Induction Time by PDSC 25 g

• ASTM E2412 FTIR Analysis, In-Service Fluid 50 mLASTM G 99 Wear Testing with a Pin-on-Disk Apparatus 100 gCEC L-036-90 Modified High Temperature High Shear Viscosity, 150°C, New Oil 150 mLCEC L-036-90 Modified High Temperature High Shear Viscosity, 150°C, Used Oil 150 mL

• CEC L-45-99 Mod. & D445 KRL Shear 04 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 08 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 20 Hours + 1 Temperature pre & post shear KV 100 mL


09


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• CEC L-45-99 Mod. & D445 KRL Shear 30 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 40 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D445 KRL Shear Custom Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 04 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 08 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 20 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 30 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 40 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear Custom Hours + pre & post shear VI 100 mL

CEC L-085-T99 Oxidation Induction Time by PDSC 5 mL• CEC L-112 Elastomer Compatibility, RE6 FKM 500 mL• CEC L-112 Elastomer Compatibility, RE7 ACM 500 mL• CEC L-112 Elastomer Compatibility, RE8 HNBR 500 mL• CEC L-112 Elastomer Compatibility, RE9 AEM 500 mL

DIN 50324 Tribological Test - Friction and Wear Model Test for Sliding Friction of Solids (Ball on Disc System) 100 g

DIN 51805 Flow Pressure, Kesternich Method 50 g

DIN 51834 Tribological Test - Translatory Oscillation Apparatus - Part 2: Determina-tion of Friction and Wear Data for Lubricating Oils. 100 g

DIN 62136-1 Needle and Sinker Lubricating Oils for Knitting Machines with Indepen-dent Needles 100 g

DIN ISO 7148-1 Tribological Test - Metallic Bearing Materials for Plain Bearings Under Conditions of Boundary Lubrication 100 g

DIN ISO 7148-2 Tribological Test - Polymer-Based Plain Bearing Materials Under Speci-fied Working Conditions 100 g

EN 14078 FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil 100 mLEN 14112 Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat 100 mLEN 15751 Oxidation Stability (Bio-based FAME Only) Rancimat 100 mLEPA Test 24 Volatile Organic Content (VOC) 10 mLFTM 203C Stable Pour Point 200 mLFTM 3456 Channeling Characteristics 1 LIP 346 PCA - Polycyclic Analysis 100 mLISO 14635-1 FZG Gear Test 2 LISO 14635-2 FZG Gear Test (A10/16.6R/30 or A10/16.6R/90) Custom 2 LISO 14635-3 FZG Gear Test, Grease 3.5 LISO 4406 Particle Count 100 mLNACE TM0172 Corrosive Properties of Cargoes in Petroleum Product Pipelines 1 LSAVLAB APP Appearance 50 mLSAVLAB CAP Cone & Plate Viscosity 10 mLSAVLAB FEI Fuel Efficiency Index (FEI) 300 mLSAVLAB FGE FoamGen Analysis (Custom Test) 1 LSAVLAB GES GE Locomotive Specification (GE Package 1, B82-1 test) 300 mL

• SAVLAB IR Fourier Transform Infra-Red, FTIR, Spectra Only 50 mL• SAVLAB IRG Fourier Transform Infra-Red, FTIR, Glycol Analysis 50 mL• SAVLAB IRW Fourier Transform Infra-Red, FTIR, Water Analysis 50 mL• SAVLAB LPYC Density, Pycnometer 120 mL

SAVLAB MIC Microscopy 10 mLSAVLAB PEI Phosphorus Emissions Index (PEI) at 250ºC, 1 Hour 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 16 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 32 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 48 Hours 250 mL


10


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 64 Hours 250 mLSAVLAB PH pH Determination 150 mLSAVLAB RBP Reflux Boiling Point 100 mLSAVLAB SEI Sulfur Emissions Index, (SEI) 250 mLSAVLAB SFACALC Sulfated Ash, Calculated from ICP Results N/ASAVLAB TBR High Temperature Low Shear / TBR Viscosity, New Oil 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Shear 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Temperature 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Used Oil 150 mLSAVLAB TGASCAN TGA Thermal Scan or Isotherm 5 mLSAVLAB TURBO Thermo-oxidation Engine Oil Simulation Test (TURBO) 250 mLSAVLAB VLP Viscosity Loss Profile (VLP), 20 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 30 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 40 Passes 1 LSAVLAB WHAT Fuel Additive Water Uptake 100 mL

• SAVLAB XRFSCAN Elemental Analysis, Qualitative by XRF 30 mLUS Steel LT-37 Grease Mobility 50 mL

• VDA 675301 GM Dexos 1:2015 Elastomer Compatibility, AEM, Ethylene Acrylate 1.2 L


11


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D664 Acid Number 50 mL

ASTM D974 Acid Number 50 mLASTM D3427 Air Release, Gas Bubble Separation 500 mLASTM D611 Aniline Point 100 mLASTM D287 API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) 250 mLASTM D1092 Apparent Viscosity, Grease 500 gSAVLAB APP Appearance 50 mLASTM D5186 Aromatics in Diesel Fuel 150 mLASTM D6560 Asphaltene Content 25 gASTM D2155 Auto-Ignition Temperature (Hydraulic Fluids) 10 mLASTM E659 Auto-Ignition Temperature, Liquid Chemicals 10 mLASTM D6557 Ball Rust Test 125 mLASTM D974 Base Number 50 mL

• ASTM D2896 Base Number 50 mL• ASTM D4739 Base Number 20 mL

ASTM D5769 Benzene, Toluene, Total Aromatics by GC/MS 10 mLASTM D2714 Block on Ring Friction and Wear 200 mLASTM D1120 Boiling Point of Coolants 100 mL

• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mLASTM D6793 Bulk Modulus, Up to 80°C 200 mLASTM D3238 Carbon Distribution Analysis 250 mLASTM D189 Carbon Residue, Conradson 50 mLASTM D4530 Carbon Residue, Micro 150 mLASTM D524 Carbon Residue, Ramsbottom 50 mLASTM D5291 Carbon, Hydrogen and Nitrogen Content 30 mLASTM D976 & D4737 Cetane Index (Calculated from D1298 and D86) 500 mLASTM D4737 Cetane Index (Calculated from D1298 and D86) 500 mLASTM D613 Cetane Number 1 LFTM 3456 Channeling Characteristics 1 L

• ASTM D6443 Chlorine by XRF 30 mLASTM D2007 Clay Gel Analysis 100 mLASTM D2500 Cloud Point 100 mLASTM D5183 Coefficient of Friction by Four Ball 100 mL

• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5293 Mod. Cold Cranking Simulator, Temperature Scan 120 mL

ASTM D6371 Cold Filter Plug Point 150 mLASTM D1500 Color 150 mLASTM D156 Color (Saybolt Chromometer Method) 250 mLSAVLAB CAP Cone & Plate Viscosity 10 mLASTM D1403 Cone Penetration, 1/4 or 1/2 Scale 100 gASTM D217 Cone Penetration, Unworked and 60 Strokes (Grease) 800 gASTM D6200 Cooling Curve Analysis of Quench Oils 1.5 LASTM D130 Copper Strip Corrosion 100 mLASTM D4048 Copper Strip Corrosion, Grease 100 gASTM D5969 Corrosion-Preventive, Dilute Synthetic Sea Water Evironments 30 gASTM D6138 Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) 40 gNACE TM0172 Corrosive Properties of Cargoes in Petroleum Product Pipelines 1 LASTM D2711 Demulsibility - Procedure A (No EP Additives) 2 LASTM D2711 Demulsibility - Procedure B (Contains EP Additives) 2 LASTM D1298 Density / API Gravity, Hydrometer 350 mL

12

Tests in Alphabetical Order Gold bullets indicate ISO/IEC 17025:2017 Accreditation


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• SAVLAB LPYC Density, Pycnometer 120 mL

ASTM D877 Dielectric Breakdown Voltage 800 mLASTM D924 Dissipation/Power Factor 500 mLASTM D86 Modified Distillation by Gas Chromatograph 400 mLASTM D5620 Drain and Dry Mode Using Falex Pin & Vee Block Test Machine 100 mLASTM D2265 Dropping Point 50 gASTM D566 Dropping Point Grease 50 gASTM D4289 Elastomer Compatibility NBR L and CR Grease 400 gASTM D4289 Elastomer Compatibility NBR L or CR Grease 200 g

• CEC L-112 Elastomer Compatibility, RE6 FKM 500 mL• CEC L-112 Elastomer Compatibility, RE7 ACM 500 mL• CEC L-112 Elastomer Compatibility, RE8 HNBR 500 mL• CEC L-112 Elastomer Compatibility, RE9 AEM 500 mL

ASTM D6130 Elemental Analysis by ICP, Aqueous / Coolants / Sulfur, 5 elements 10 mL• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals (No S) 10 mL• SAVLAB XRFSCAN Elemental Analysis, Qualitative by XRF 30 mL

ASTM D1401 Emulsion Characteristics, Water Separability 100 mLASTM D7563 Emulsion of Water and Simulated Ed85 Fuel 500 mLASTM D6795 Engine Oil Filterability (EOFT) 1 LASTM D6794 Engine Oil Water Tolerance (EOWT) 1 LASTM D972 Evaporation Loss (Grease) - Specify Time and Temperature 150 mLASTM D2595 Evaporation Loss, Grease, Wide Temperature Range 25 g

ASTM D7421 Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Lin-ear-Oscillation Using SRV 25 g

ASTM D7217 Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation SRV 100 g

ASTM D5706 Extreme Pressure Properties Using SRV, Procedure A 20 gASTM D5706 Extreme Pressure Properties Using SRV, Procedure B 20 gASTM D3233 Falex Extreme Pressure 200 mLASTM D2670 Falex Pin & Vee Wear 200 mLASTM D7371 FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil 100 mLEN 14078 FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil 100 mL

• ASTM D92 Fire Point, Cleveland Open Cup 250 mL• ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 mL• ASTM D92 Flash Point, Cleveland Open Cup 250 mL• ASTM D93 Flash Point, Pensky-Martins Closed Cup 250 mL

DIN 51805 Flow Pressure, Kesternich Method 50 gSAVLAB FGE FoamGen Analysis (Custom Test) 1 L

• ASTM D892 Foaming, Sequence I - III (Specify Option A if Required) 1 L• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify Option A if Required) 1 L• ASTM D6082 Foaming, Sequence IV (Specify Option A if Required) 1 L

ASTM D2596 Four Ball Extreme Pressure (Grease) Above 400 kg 500 gASTM D2596 Four Ball Extreme Pressure (Grease) Up to 400 kg 500 gASTM D2783 Four Ball Extreme Pressure Above 400 kg. 200 mLASTM D2783 Four Ball Extreme Pressure Up to 400 kg. 200 mLASTM D4172 Four Ball Wear 100 mLASTM D2266 Four Ball Wear (Grease) 100 g

• SAVLAB IRG Fourier Transform Infra-Red, FTIR, Glycol Analysis 50 mL

13



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• SAVLAB IR Fourier Transform Infra-Red, FTIR, Spectra Only 50 mL• SAVLAB IRW Fourier Transform Infra-Red, FTIR, Water Analysis 50 mL

ASTM D1177 Freeze Point 100 mLASTM D5972 Freeze Point 100 mLASTM D7594 Fretting Wear, High Hertzian, High-Frequency, Linear-Oscillation (SRV) 50 g ASTM D4170 Fretting Wear, Grease 40 g


ASTM D5707 Friction and Wear Properties Using SRV 20 g• ASTM E2412 FTIR Analysis, In-Service Fluid 50 mL• ASTM D7624 FTIR Analysis, In-Service Fluid, Nitration 50 mL• ASTM D7414 FTIR Analysis, In-Service Fluid, Oxidation 50 mL• ASTM D7412 FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear 50 mL• ASTM D7844 FTIR Analysis, In-Service Fluid, Soot 50 mL• ASTM D7415 FTIR Analysis, In-Service Fluid, Sulfate Content 50 mL

ASTM D7214 FTIR Analysis, Oxidation by Peak Area Increase 50 mLSAVLAB WHAT Fuel Additive Water Uptake 100 mL

• ASTM D3524 Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) 10 mL• ASTM D3525 Fuel Dilution, Gasoline 10 mL

SAVLAB FEI Fuel Efficiency Index (FEI) 300 mLASTM D5275 Fuel Injector Shear Stability (FISST), 20 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), 30 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), 40 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), Other Passes 500 mLASTM D5182 FZG Gear Test - Up to 12 Stages 2 LASTM D5182 FZG Gear Test - Up to 14 Stages 2 LISO 14635-1 FZG Gear Test 2 LISO 14635-2 FZG Gear Test (A10/16.6R/30 or A10/16.6R/90) Custom 2 LISO 14635-3 FZG Gear Test, Grease 3.5 L

• ASTM D2887 Gas Chromatography - Carbon Distribution Extended 10 mLSAVLAB GES GE Locomotive Specification (GE Package 1, B82-1 test) 300 mL

• ASTM D5133 Gelation Index 50 mL• ASTM D7216 GF-5 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, VMQ, Silicone 1.2 L

ASTM D4291 Glycol 5 mLASTM D2982 Glycol-Base Antifreeze in Used Oils 20 mL

• VDA 675301 GM Dexos 1:2015 Elastomer Compatibility, AEM, Ethylene Acrylate 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone 1.2 L

ASTM D240 Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) 20 mLASTM D1404 Harmful Particles in Grease 30 g

14



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D7216 HDD Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 HDD Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 HDD Elastomer Compatibility, MAC, Vamac 1.2 L• ASTM D7216 HDD Elastomer Compatibility, NBR, Nitrile 1.2 L• ASTM D7216 HDD Elastomer Compatibility, VMQ, Silicone 1.2 L

ASTM D4287 High-Shear Viscosity Using a Cone/Plate Viscometer 10 mLASTM D3336 High Temperature Bearing Performance Up to 600 Hours 50 gASTM D6594 High Temperature Corrosion Bench Test at 135°C 300 mL

• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, New Oil 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Other Shear 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Used Oil 150 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, Used Oil 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Below 50°C 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Multi-Temp., Multi-Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Temperature 150 mL

CEC L-036-90 Modified High Temperature High Shear Viscosity, 150°C, New Oil 150 mLCEC L-036-90 Modified High Temperature High Shear Viscosity, 150°C, Used Oil 150 mLASTM D3527 High Temperature Life, Wheel Bearing Grease 120 gSAVLAB TBR High Temperature Low Shear / TBR Viscosity, New Oil 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Shear 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Temperature 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Used Oil 150 mLASTM D6922 Homogeneity & Miscibility 300 mLASTM D1319 Hydrocarbon Type 40 mLASTM D2619 Hydrolytic Stability 250 mLASTM D1957 Hydroxyl Number 25 mLASTM D893 Insolubles, Pentane 25 mLASTM D5554 Iodine Value 60 mL

• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, Below 0°C 125 mL• ASTM D445 Kinematic Viscosity, Used or In-Service Oil 125 mL• CEC L-45-99 Mod. & D445 KRL Shear 04 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 04 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 08 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 08 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 20 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 20 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 30 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 30 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D445 KRL Shear 40 Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear 40 Hours + pre & post shear VI 100 mL• CEC L-45-99 Mod. & D445 KRL Shear Custom Hours + 1 Temperature pre & post shear KV 100 mL• CEC L-45-99 Mod. & D2270 KRL Shear Custom Hours + pre & post shear VI 100 mL• ASTM D7109 Kurt Orbahn Shear Stability - Includes 30 and 90 Passes 1 L• ASTM D6278 Mod. Kurt Orbahn Shear Stability, 100 Passes 1 L• ASTM D6278 Kurt Orbahn Shear Stability, 30 Passes 1 L• ASTM D6278 Mod. Kurt Orbahn Shear Stability, 90 Passes 1 L• ASTM D6278 Mod. Kurt Orbahn Shear Stability, Custom Number of Passes 1 L

15



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D4290 Leakage of Wheel Bearing Grease 200 gASTM D1478 Low Temperature Torque 10 gASTM D4693 Low Temperature Torque, Wheel Bearing Grease 50 gASTM D6079 Lubricity by HFRR 10 mLSAVLAB MIC Microscopy 10 mL

• ASTM D3829 Mini-Rotary Viscosity (MRV), Single Temperature 200 mL

DIN 62136-1 Needle and Sinker Lubricating Oils for Knitting Machines with Independent Needles 100 g

• ASTM D5762 Nitrogen 10 mLASTM D5291 Nitrogen - Carlo Erba 30 mL

• ASTM D4629 Nitrogen by Chemiluminescence 30 mL• ASTM D5800 Noack Volatility 150 mL

ASTM D6375 Noack Volatility by TGA 20 mLASTM D2700 Octane Number (Motor Rating) 800 mLASTM D2699 Octane Number (Research Rating) 800 mLASTM D6184 Oil Separation Percent, Wire Cone Method 100 gASTM D1742 Oil Separation, Storage of Greases 300 gASTM D3704 Oscillation Friction Wear, Grease 20 gASTM D943 Oxidation Characteristics (2.0 TAN or 1000 Hours) 600 mLASTM D943 Oxidation Characteristics (2.0 TAN or 2000 Hours) 600 mLASTM D943 Oxidation Characteristics (2.0 TAN or 3000 Hours) 600 mLASTM D2893 Oxidation Characteristics Extreme Pressure 500 mLASTM D6186 Oxidation Induction Time by PDSC 20 mLASTM E1858 Oxidation Induction Time by PDSC 25 gCEC L-085-T99 Oxidation Induction Time by PDSC 5 mLEN 15751 Oxidation Stability (Bio-based FAME Only) Rancimat 100 mLASTM D7462 Oxidation Stability (Biodiesel - B100 Option) 2 LEN 14112 Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat 100 mLASTM D7462 Oxidation Stability (Biodiesel) 2 LASTM D525 Oxidation Stability (Gasoline) 200 mLASTM D942 Oxidation Stability (Grease) 100 Hours 150 mLASTM D2274 Oxidation Stability (Petroleum Fuel Oil) 2 LASTM D5483 Oxidation Stability of Greases by PDSC 10 gASTM D2112 Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C 150 mLISO 4406 Particle Count 100 mLASTM D7619/ISO 4406 Particle Count and Sizing 500 mLASTM D7321 Particulate Contamination for Biodiesel Fuels 1 LASTM D6217 Particulate Contamination for Diesel Fuels 1 LIP 346 PCA - Polycyclic Analysis 100 mLASTM D7317 Pentane Insolubles by Filtration 25 mLASTM D3703 Peroxide Value 200 mLSAVLAB PH pH Determination 150 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 16 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 32 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 48 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 64 Hours 250 mLSAVLAB PEI Phosphorus Emissions Index (PEI) at 250ºC, 1 Hour 250 mL

• ASTM D97 Pour Point 100 mLASTM D3520 Quenching Time 600 mLSAVLAB RBP Reflux Boiling Point 100 mLASTM D1218 Refractive Index 20 mL

16



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D323 Reid Vapor Pressure 125 mLASTM D4049 Resistance of Lubricating Grease to Water Spray 25 gASTM D1831 Roll Stability of Grease 100 gASTM D8022 Roll Stability, Presence of Water 454 g

• ASTM D2272 Rotating Bomb Oxidation Test (RBOT) Single Run 150 mL• ASTM D2272 Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run 150 mL• ASTM D2272 RPVOT, Run to End-of-Test, Hard Break 150 mL

ASTM D665 Rust Prevention 24 Hours (Method A or B) 1 LASTM D665 Rust Prevention 4 Hours (Method A or B) 1 LASTM D1743 Rust Prevention Properties of Grease 50 gASTM D1748 Rust Protection by Humidity Cabinet 1 LASTM D94 Saponification Number 25 g

• ASTM D5133 Scanning Brookfield Viscosity (-5°C to -40°C) 50 mL• ASTM D5133 Scanning Brookfield Viscosity, Extended Temperature Range 50 mL• ASTM D6417 Simulated Distillation by Gas Chromatography 10 mL

ASTM D4310 Sludging & Corrosion Tendency Up to 1000 Hours 1 LASTM D5621 Sonic Shear, Hydraulic Fluids 100 mLASTM D2603 Sonic Shear, Oils 100 mLASTM D4052 Specific Gravity (Includes API Gravity) 50 mLASTM E1269 Specific Heat 100 mLFTM 203C Stable Pour Point 200 mLASTM D5827 Sulfate Analysis (SO4) 30 mL

• ASTM D874 Sulfated Ash 50 gSAVLAB SFACALC Sulfated Ash, Calculated from ICP Results N/A

• ASTM D5453 Sulfur 10 mL• ASTM D5453 & D5762 Sulfur and Nitrogen Package 20 mL• ASTM D5185 Sulfur by Elemental Analysis by Inductively Coupled Plasma 10 mL

ASTM D4294 Sulfur by XRF - Energy Dispersive 10 mL• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mL

ASTM D4927 Sulfur Content for Automatic Transmission Fluid by XRF 30 mLSAVLAB SEI Sulfur Emissions Index, (SEI) 250 mLASTM D1662 Sulfur, Active 100 gASTM D1331 Surface Tension 100 mLASTM D1084 B T-Bar Viscosity VariesASTM E1131 TGA Soot 5 mLSAVLAB TGASCAN TGA Thermal Scan or Isotherm 5 mLASTM D2717 Thermal Conductivity - Single Temperature 100 mLASTM D2070 Thermal Stability (Hydraulic Fluids) 300 mL

• ASTM D6335 Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) 250 mL• ASTM D7097 Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) 50 mL

SAVLAB TURBO Thermo-oxidation Engine Oil Simulation Test (TURBO) 250 mLASTM D4742 Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils 50 mLASTM D7098 Thin Film Oxygen Uptake Test (TFOUT) Catalyst B 50 mLASTM D2782 Timken Extreme Pressure (Specify Starting Load) 4 LASTM D2509 Timken OK Load for Grease (Specify Starting Load) 3400 gASTM D482 Total Ash 80 g

• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mLASTM D2273 Trace Sediment 200 g

DIN 50324 Tribological Test - Friction and Wear Model Test for Sliding Friction of Solids (Ball on Disc System) 100 g

DIN ISO 7148-1 Tribological Test - Metallic Bearing Materials for Plain Bearings Under Condi-tions of Boundary Lubrication 100 g

17



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size

DIN ISO 7148-2 Tribological Test - Polymer-Based Plain Bearing Materials Under Specified Working Conditions 100 g

DIN 51834 Tribological Test - Translatory Oscillation Apparatus - Part 2: Determination of Friction and Wear Data for Lubricating Oils. 100 g

ASTM D7420 Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV 100 g

ASTM D2008 UV Absorbance to Absorptivity 10 mLASTM D2879 Vapor Pressure by Isoteniscope, Multiple Temperatures 10 mLASTM D2879 Vapor Pressure by Isoteniscope, Single Temperature 10 mL

• ASTM D2270 Viscosity Index (Includes D445 at 40°C and 100°C) 125 mLSAVLAB VLP Viscosity Loss Profile (VLP), 20 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 30 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 40 Passes 1 LASTM D2532 Viscosity Stability at Low Temperature 125 mLEPA Test 24 Volatile Organic Content (VOC) 10 mLASTM D2709 Water and Sediment 100 mLASTM D1768 Water and Sediment for Opaque or In-Service Oils 100 mL

• ASTM D6304 Water by Karl Fischer 100 mLASTM D1533 Water in Insulating Liquids by Coulometric Karl Fischer Titration 100 mLASTM D1264 Water Washout (Single Bearing/Single Temperature) 50 gASTM D1264 Water Washout (Two Bearings Per Method/Single Temperature) 100 gASTM G 99 Wear Testing with a Pin-on-Disk Apparatus 100 g

17

18



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D445 Viscosity, Kinematic 40°C or 100°C 125 mL• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify option A if required) 1 L• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mL• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals 10 mL• ASTM D5133 Gelation Index 50 mL• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5800 Noack Volatility 150 mL• ASTM D6335 Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) 250 mL

ASTM D6557 Ball Rust Test 125 mLASTM D6794 Engine Oil Water Tolerance (EOWT) 1 LASTM D6795 Engine Oil Filterability (EOFT) 1 LASTM D6922 Homogeneity & Miscibility 300 mL

• ASTM D7097 Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) 50 mL• ASTM D7216 GF-5 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, VMQ, Silicone 1.2 L

ASTM D7563 Emulsion of Water and Simulated Ed85 Fuel 500 mL

••

API SN, ILSAC GF-5/GF-5 Plus & SAE J183

19

Tests required to qualify for API SN or ILSAC GF-5 can vary by certification and grade. The above list contains bench tests that may be required. Review the specification according to your specific situation.

The Package Price comes standard with the above listed tests. Please contact us if you would like a custom test package quoted.

Gold bullets indicate ISO/IEC 17025:2017 Accreditation


[email protected]

P: 989-496-2301

S A V A N T L A B S

API SP, ILSAC GF-6A/GF-6B & SAE J183

Method Test Description Sample Size• ASTM D445 Viscosity, Kinematic 40°C or 100°C 125 mL• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify option A if required) 1 L• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mL• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals 10 mL• ASTM D5133 Gelation Index 50 mL• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5800 Noack Volatility 150 mL• ASTM D6278 Kurt Orbahn Shear Stability, 30 Passes (GF6B Only) 1 L• ASTM D6335 Thermo-oxidation Engine Oil Simulation Test (33C) (GF6A Only) 250 mL

ASTM D6557 Ball Rust Test 125 mLASTM D6794 Engine Oil Water Tolerance (EOWT) 1 LASTM D6795 Engine Oil Filterability (EOFT) 1 LASTM D6922 Homogeneity & Miscibility 300 mL

• ASTM D7216 GF-6 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, VMQ, Silicone 1.2 L

ASTM D7563 Emulsion of Water and Simulated Ed85 Fuel 500 mL

20

Tests required to qualify for API SP or ILSAC GF-6 can vary by certification and grade. The above list contains bench tests that may be required. Review the specification according to your specific situation.


Gold bullets indicate ISO/IEC 17025:2017 Accreditation


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D874 Sulfated Ash 50 g• ASTM D892 Foaming, Sequence I - III (Specify option A if required) 1 L• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals 10 mL• ASTM D5800 Noack Volatility 150 mL

ASTM D6594 High Temperature Corrosion Bench Test at 135°C 300 mL• ASTM D7109 Kurt Orbahn Shear Stability - Includes 30 and 90 Passes 1 L• ASTM D7216 HDD Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 HDD Elastomer Compatibility, FKM, Fluroelastomer 1.2 L• ASTM D7216 HDD Elastomer Compatibility, MAC, Vamac 1.2 L• ASTM D7216 HDD Elastomer Compatibility, NBR, Nitrile 1.2 L• ASTM D7216 HDD Elastomer Compatibility, VMQ, Silicone 1.2 L

API CK / FA-4 Gold bullets indicate ISO/IEC 17025:2017 Accreditation

21

Tests required to qualify for API CK/FA-4 can vary by certification and grade. The above list contains bench tests that may be required. Review the specification according to your specific situation.



[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 mL• ASTM D97 Pour Point 100 mL

ASTM D287 API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) 250 mL• ASTM D445 Kinematic Viscosity, 0oC and Above 125 mL• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, Below 0ºC 125 mL• ASTM D445 Kinematic Viscosity, Used or In-Service Oil 125 mL• ASTM D664 Acid Number 50 mL• ASTM D874 Sulfated Ash 50 g• ASTM D892 Foaming, Sequence I - III (Specify option A if required) 1 L• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify option A if required) 1 L

ASTM D1298 Density / API Gravity, Hydrometer 350 mL• ASTM D2270 Viscosity Index (Includes D445 at 40°C & 100°C) 125 mL• ASTM D2896 Base Number 50 mL

ASTM D2982 Glycol 20 mL• ASTM D3524 Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) 10 mL• ASTM D3525 Fuel Dilution, Gasoline 10 mL• ASTM D3829 Mini-Rotary Viscosity (MRV), Single Temperature 200 mL

ASTM D4052 Specific Gravity (Includes API Gravity) 50 mLASTM D4291 Glycol 5 mL

• ASTM D4629 Nitrogen by Chemiluminescence 30 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, Used Oil 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Below 50oC 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Multi-Temperature, Multi-Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Temperature 150 mL• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mL• ASTM D4739 Base Number 20 mL

ASTM D4742 Thin Film Oxidation Uptake Test (TFOUT) Gas Engine Oils 50 mL• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals 10 mL• ASTM D5133 Gelation Index 50 mL• ASTM D5133 Scanning Brookfield Viscosity (-5ºC to -40ºC) 50 mL• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5293 Mod. Cold Cranking Simulator, Temperature Scan 120 mL• ASTM D5453 Sulfur 10 mL• ASTM D5453 & D5762 Sulfur & Nitrogen Package 20 mL• ASTM D5762 Nitrogen 10 mL• ASTM D5800 Noack Volatility 150 mL• ASTM D6082 Foaming, Sequence IV (Specify option A if required) 1 L• ASTM D6278 Kurt Orbahn Shear Stability, 30 Passes 1 L• ASTM D6304 Water by Karl Fischer 100 mL• ASTM D6335 Thermo-oxidation Engine Oil Simulation Test (TEOST 33C) 250 mL

ASTM D6375 Noack Volatility by TGA 20 mL• ASTM D6417 Simulated Distillation by Gas Chromatography 10 mL• ASTM D6443 Chlorine by XRF 30 mL

ASTM D6557 Ball Rust Test 125 mLASTM D6594 High Temperature Corrosion Bench Test at 135°C 300 mL

• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, New Oil 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Other Shear 150 mL

Engine Oil Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

22


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Used Oil 150 mL

ASTM D6794 Engine Oil Water Tolerance (EOWT) 1 LASTM D6795 Engine Oil Filterability (EOFT) 1 LASTM D6922 Homogeneity & Miscibility 300 mL

• ASTM D7097 Thermo-oxidation Engine Oil Simulation Test (TEOST MHT-4) 50 mLASTM D7098 Thin Film Oxygen Uptake Test (TFOUT) Catalyst B 50 mL

• ASTM D7109 Kurt Orbahn Shear Stability - Includes 30 and 90 Passes 1 L• ASTM D7216 GF-5 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-5 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate 1.2 L• ASTM D7216 GF-6 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile 1.2 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone 1.2 L• ASTM D7216 HDD Elastomer Compatibility, ACM, Polyacrylate 1.2 L• ASTM D7216 HDD Elastomer Compatibility, FKM, Fluroelastomer 1.2 L• ASTM D7216 HDD Elastomer Compatibility, MAC, Vamac 1.2 L• ASTM D7216 HDD Elastomer Compatibility, NBR, Nitrile 1.2 L• ASTM D7216 HDD Elastomer Compatibility, VMQ, Silicone 1.2 L

SAVLAB CAP Viscosity by Cone & Plate 10 mLSAVLAB PEI Phosphorus Emissions Index (PEI) at 250ºC, 1 Hour 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 16 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 32 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 48 Hours 250 mLSAVLAB PEI 165 Phosphorus Emissions Index (PEI) at 165ºC, 64 Hours 250 mLSAVLAB SEI Sulfur Emissions Index, (SEI) 250 mLSAVLAB SFACALC Sulfated Ash, Calculated from ICP Results N/ASAVLAB TBR High Temperature Low Shear / TBR Viscosity, New Oil 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Shear 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Temperature 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Used Oil 150 mLSAVLAB TURBO Thermo-oxidation Engine Oil Simulation Test (TURBO) 250 mLSAVLAB VLP Viscosity Loss Profile (VLP), 20 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 30 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 40 Passes 1 L

Engine Oil Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

23


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 mL• ASTM D97 Pour Point 100 mL

ASTM D130 Copper Strip Corrosion 100 mLASTM D287 API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) 250 mL

• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D445 Kinematic Viscosity, Below 0°C 125 mL• ASTM D664 Acid Number 50 mL

ASTM D665 Rust Prevention 4 Hours (Method A or B) 1 L• ASTM D892 Foaming, Sequence I - III (Specify option A if required) 1 L• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify option A if required) 1 L

ASTM D974 Acid Number 50 mLASTM D974 Base Number 50 mLASTM D1500 Color 150 mLASTM D1748 Rust Protection by Humidity Cabinet 1 L

• ASTM D2270 Viscosity Index (Includes D445 at 40°C & 100°C) 125 mL• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mL• ASTM D2896 Base Number 50 mL• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mL

ASTM D3233 Falex Extreme Pressure 200 mLASTM D4052 Specific Gravity (Includes API Gravity) 50 mLASTM D4172 Four Ball Wear 100 mL

• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mLASTM D4927 Sulfur Content for Automatic Transmission Fluid by XRF 30 mL

• ASTM D4951 Elemental Analysis by Inductively Coupled Plasma, Wear Metals 10 mLASTM D5183 Coefficient of Friction by Four Ball 100 mL

• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D5185 Sulfur by Elemental Analysis by Inductively Coupled Plasma 10 mL• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5800 Noack Volatility 150 mL• ASTM D6304 Water by Karl Fischer 100 mL• ASTM D6417 Simulated Distillation by Gas Chromatography 10 mL• ASTM D6443 Chlorine by XRF 30 mL• CEC L-45-99 Mod. & D445 KRL Shear 20 Hours + 1 Temperature pre & post shear KV 100 mL

FTM 203C Stable Pour Point 200 mL

Automatic Transmission Fluid (ATF) Gold bullets indicate ISO/IEC 17025:2017 Accreditation

24

Tests required to qualify for ATF specifications can vary by OEM. These are bench tests that may be required, review the specification according to your specific situation. Testing with Savant Labs is not a substitute for the licensing process or in any way an implied endorsement or a licensing submission.


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point, Cleveland Open Cup 250 mL• ASTM D445 Kinematic Viscosity, Used or In-Service Oil 125 mL

ASTM D482 Total Ash 80 g• ASTM D664 Acid Number 50 mL• ASTM D874 Sulfated Ash 50 g• ASTM D892 Foaming, Sequence I - III (Specify Option A if Required) 1 L

ASTM D974 Acid Number 50 mLASTM D1298 Density / API Gravity, Hydrometer 350 mLASTM D1500 Color 150 mLASTM D1768 Water & Sediment for Opaque or In-Service Oils 100 mL

• ASTM D2272 Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run 150 mLASTM D2500 Cloud Point 100 mLASTM D2709 Water & Sediment 100 mL

• ASTM D2887 Gas Chromatography - Carbon Distribution Extended 10 mL• ASTM D2896 Base Number 50 mL

ASTM D2982 Glycol-Base Antifreeze in Used Oils 20 mL• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mL

ASTM D3427 Air Release / Gas Bubble Separation 500 mL• ASTM D3524 Fuel Dilution, Diesel (Requires 250 mL of new oil and fuel) 10 mL• ASTM D3525 Fuel Dilution, Gasoline 10 mL

ASTM D4291 Glycol 5 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, Used Oil 150 mL• ASTM D4739 Base Number 20 mL• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D5185 Sulfur by Elemental Analysis by Inductively Coupled Plasma 10 mL

ASTM D6217 Particulate Contamination for Diesel Fuels 1 L• ASTM D6304 Water by Karl Fischer 100 mL• ASTM D6417 Simulated Distillation by Gas Chromatography 10 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Used Oil 150 mL

ASTM D7214 FTIR Analysis, Oxidation by Peak Area Increase 50 mLASTM D7321 Particulate Contamination for Biodiesel Fuels 1 L


ASTM D7619 / ISO 4406 Particle Count & Sizing (Diesel Fuels) 500 mL• ASTM D7624 FTIR Analysis, In-Service Fluid, Nitration 50 mL• ASTM D7844 FTIR Analysis, In-Service Fluid, Soot 50 mL• ASTM E2412 FTIR Analysis, In-Service Fluid 50 mL• SAVLAB IRG Fourier Transform Infra-Red, FTIR, Glycol Analysis 50 mL• SAVLAB IRW Fourier Transform Infra-Red, FTIR, Water Analysis 50 mL

ISO 4406 Particle Count 100 mL• SAVLAB XRFSCAN Elemental Analysis, Qualitative by XRF 30 mL

SAVLAB TBR High Temperature Low Shear / TBR Viscosity, Used Oil 150 mL

Condition Monitoring Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

25


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D86 Modified Distillation by Gas Chromatograph 400 mL

• ASTM D93 Flash Point, Pensky-Martins Closed Cup 250 mL• ASTM D97 Pour Point 100 mL

ASTM D130 Copper Strip Corrosion 100 mLASTM D189 Carbon Residue, Conradson 50 mLASTM D240 Gross Heat of Combustion (Specify BTUs/Gallon or /Pound) 20 mLASTM D323 Reid Vapor Pressure 125 mL

• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mLASTM D482 Total Ash 80 gASTM D524 Carbon Residue, Ramsbottom 50 mL

• ASTM D664 Acid Number 50 mLASTM D893 Insolubles, Pentane 25 mLASTM D974 Acid Number 50 mLASTM D976 & D4737 Cetane Index (Calculated from D1298 and D86) 500 mLASTM D1298 Density / API Gravity, Hydrometer 350 mLASTM D1500 Color 150 mLASTM D2274 Oxidation Stability (Petroleum Fuel Oil) 2 LASTM D2500 Cloud Point 100 mL

• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mLASTM D2709 Water and Sediment 100 mL

• ASTM D2887 Gas Chromatography - Carbon Distribution 10 mL• ASTM D5133 Scanning Brookfield Viscosity (-5°C to -40°C) 50 mL• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL

ASTM D5186 Aromatics in Diesel Fuel 150 mLASTM D5291 Carbon, Hydrogen and Nitrogen Content 30 mLASTM D5291 Nitrogen - Carlo Erba 30 mL

• ASTM D5453 Sulfur 10 mL• ASTM D5453 & 5762 Sulfur and Nitrogen Package 20 mL

ASTM D6079 Lubricity by HFRR 10 mLASTM D6217 Particulate Contamination for Diesel Fuels 1 L

• ASTM D6304 Water by Karl Fischer 100 mLASTM D6371 Cold Filter Plug Point 150 mLASTM D7321 Particulate Contamination for Biodiesel Fuels 1 LASTM D7371 FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil 100 mL


ASTM D7462 Oxidation Stability (Biodiesel) 2 LASTM D7462 Oxidation Stability (Biodiesel - B100 Option) 2 LASTM E659 Auto-Ignition Temperature, Liquid Chemicals 10 mLEN 14078 FAME Fatty Acid Methyl Esters Content in Diesel Fuel Oil 100 mLEN 14112 Oxidation Stability (Biodiesel & Petroleum Blends) Rancimat 100 mLEN 15751 Oxidation Stability (Bio-based FAME Only) Rancimat 100 mLSAVLAB BDICP Elemental Analysis for Biodiesel Fuels 10 mL

Diesel Fuel Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

26


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D4289 Elastomer Compatibility NBR L and CR Grease 400 gASTM D4289 Elastomer Compatibility NBR L or CR Grease 200 g

• ASTM D7216 GF-5 Elastomer Compatibility, ACM, Polyacrylate 1 L• ASTM D7216 GF-5 Elastomer Compatibility, FKM, Fluoroelastomer 1 L• ASTM D7216 GF-5 Elastomer Compatibility, HNBR, Nitrile 1 L• ASTM D7216 GF-5 Elastomer Compatibility, MAC, Ethylene Acrylate 1 L• ASTM D7216 GF-5 Elastomer Compatibility, VMQ, Silicone 1 L• ASTM D7216 GF-6 Elastomer Compatibility, ACM, Polyacrylate 1 L• ASTM D7216 GF-6 Elastomer Compatibility, FKM, Fluoroelastomer 1 L• ASTM D7216 GF-6 Elastomer Compatibility, HNBR, Nitrile 1 L• ASTM D7216 GF-6 Elastomer Compatibility, MAC, Ethylene Acrylate 1 L• ASTM D7216 GF-6 Elastomer Compatibility, VMQ, Silicone 1 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, ACM Polyacrylate 1 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, FKM, Fluoroelastomer 1 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, HNBR, Nitrile 1 L• ASTM D7216 GM dexos1:2015 Elastomer Compatibility, VMQ, Silicone 1 L• ASTM D7216 HDD Elastomer Compatibility, ACM, Polyacrylate 1 L• ASTM D7216 HDD Elastomer Compatibility, FKM, Fluroelastomer 1 L• ASTM D7216 HDD Elastomer Compatibility, MAC, Vamac 1 L• ASTM D7216 HDD Elastomer Compatibility, NBR, Nitrile 1 L• ASTM D7216 HDD Elastomer Compatibility, VMQ, Silicone 1 L• CEC L-112-16 Elastomer Compatibility, RE6, FKM, Fluoroelastomer 1 L• CEC L-112-16 Elastomer Compatibility, RE7, ACM, Polyacrylate 1 L• CEC L-112-16 Elastomer Compatibility, RE8, HNBR, Nitrile 1 L• CEC L-112-16 Elastomer Compatibility, RE9, AEM, Ethylene Acrylic 1 L• VDA 675301 GM dexos1:2015 Elastomer Compatibility, AEM, Ethylene Acrylate 1.2 L

Elastomer Compatibility Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

27


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point and Fire Point, Cleveland Open Cup 250 mL• ASTM D97 Pour Point 100 mL• ASTM D445 Kinematic Viscosity (and Calculation of Dynamic Viscosity) 125 mL

ASTM D611 Aniline Point 100 mL• ASTM D664 Acid Number 50 mL

ASTM D877 Dielectric Breakdown Voltage 800 mLASTM D924 Dissipation/Power Factor 50 mLASTM D974 Acid and Base Number by Color-Indicator Titration 100 mLASTM D1298 Density / API Gravity, Hydrometer 350 mLASTM D1500 Color 150 mLASTM D1533 Water in Insulating Liquids by Coulometric Karl Fischer Titration 100 mLASTM D2112 Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C 150 mLASTM D2717 Thermal Conductivity - Single Temperature 100 mLASTM D4052 Specific Gravity (Includes API Gravity 50 mL

Electrical Insulating Fluid Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

28


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point, Cleveland Open Cup 250 mL

ASTM D94 Saponification Number 25 g• ASTM D97 Pour Point 100 mL

ASTM D130 Copper Strip Corrosion 100 mLASTM D287 API Gravity of Crude Petroleum / Petroleum Products (Hydrometer) 250 mL

• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mLASTM D445 Kinematic Viscosity, 0°C and Above 125 mL

• ASTM D664 Acid Number 50 mLASTM D665 Rust Prevention 4 Hours (Method A or B) 1 LASTM D665 Rust Prevention 24 Hours (Method A or B) 1 L

• ASTM D874 Sulfated Ash 50 g• ASTM D892 Foaming, Sequence I - III (Specify option A if required) 1 L

ASTM D893 Insolubles, Pentane 25 mLASTM D943 Oxidation Characteristics (2.0 TAN or 1000 Hours) 600 mLASTM D1500 Color 150 mLASTM D2270 Viscosity Index (Includes D445 at 40°C and 100°C) 125 mLASTM D2603 Sonic Shear, Oils 100 mL

• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mL• ASTM D2670 Falex Pin & Vee Wear 200 mL

ASTM D2711 Demulsibility - Procedure A (No EP Additives) 2 LASTM D2711 Demulsibility - Procedure B (Contains EP Additives) 2 LASTM D2714 Block on Ring Friction and Wear 200 mLASTM D2782 Timken Extreme Pressure (SpecifyStarting Load) 4 LASTM D2783 Four Ball Extreme Pressure Up to 400 kg. 200 mLASTM D2783 Four Ball Extreme Pressure Above 400 kg. 200 mL

• ASTM D2887 Gas Chromatography - Carbon Distribution 10 mLASTM D2893 Oxidation Characteristics Extreme Pressure 500 mL

• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mLASTM D3233 Falex Extreme Pressure 200 mLASTM D3427 Air Release / Gas Bubble Separation 500 mLASTM D4172 Four Ball Wear 100 mLASTM D4310 Sludging & Corrosion Tendency Up to 1000 Hours 1 LASTM D5182 FZG Gear Test - Up to 12 Stages 2 LASTM D5182 FZG Gear Test - Up to 14 Stages 2 LASTM D5183 Coefficient of Friction by Four Ball 100 mL

• ASTM D5453 & D5762 Sulfur and Nitrogen Package 20 mLASTM D5620 Drain and Dry Mode Using Falex Pin & Vee Block Test Machine 100 mL

• CEC L-45-99 Mod. & D445 KRL Shear 20 Hours + 1 Temperature pre & post shear KV 100 mLFTM 3456 Channeling Characteristics 1 L

Gear Lubricant Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

29


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D94 Saponification Number 25 gASTM D217 Cone Penetration, Unworked and 60 Strokes (Grease) 800 gASTM D566 Dropping Point Grease 50 gASTM D942 Oxidation Stability (Grease) 100 Hours 150 mLASTM D972 Evaporation Loss (Grease) - Specify Time and Temperature 150 mLASTM D1092 Apparent Viscosity, Grease 500 gASTM D1264 Water Washout (Single Temperature) 50 gASTM D1264 Water Washout (Two Bearings Per Method/ Single Temperature) 100 gASTM D1403 Cone Penetration, 1/4 or 1/2 Scale 100 gASTM D1404 Harmful Particles in Grease 30 gASTM D1478 Low Temperature Torque - Grease 10 gASTM D1742 Oil Separation, Storage of Greases 300 gASTM D1743 Rust Prevention Properties of Grease 50 gASTM D1831 Roll Stability of Grease 100 gASTM D2265 Dropping Point 50 gASTM D2266 Four Ball Wear (Grease) 100 gASTM D2509 Timken OK Load for Grease (Specify starting load) 3400 gASTM D2595 Evaporation Loss, Grease, Wide Temperature Range 25 gASTM D2596 Four Ball Extreme Pressure (Grease) Up to 400 kg. 500 gASTM D2596 Four Ball Extreme Pressure (Grease) Above 400 kg. 500 g

• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mLASTM D3336 High Temperature Bearing Performance Up to 600 Hours 50 gASTM D3527 High Temperature Life, Wheel Bearing Grease 120 mLASTM D3704 Oscillation Friction Wear, Grease 20 gASTM D4048 Copper Strip Corrosion, Grease 100 gASTM D4049 Resistance of Lubricating Grease to Water Spray 25 gASTM D4170 Fretting Wear, Grease 40 gASTM D4289 Elastomer Compatibility NBR L and CR Grease 400 gASTM D4289 Elastomer Compatibility NBR L or CR Grease 200 gASTM D4290 Leakage of Wheel Bearing Grease 200 gASTM D4693 Low Temperature Torque, Grease 50 gASTM D5483 Oxidation Stability of Greases by PDSC 10 gASTM D5706 Extreme Pressure Properties Using SRV, Procedure A 20 g

ASTM D5706 Extreme Pressure Properties Using SRV, Procedure B 20 g

ASTM D5707 High Frequency, Linear Oscillation, SRV of Grease 20 gASTM D5969 Corrosion-Preventive, Dilute Synthetic Sea Water Environments 30 gASTM D6138 Corrosion-Preventive, Dynamic Wet Conditions (Emcor Test) 40 gASTM D6184 Oil Separation Percent, Wire Cone Method 100 gASTM D6186 Oxidation Induction Time by PDSC 20 mL

• ASTM D6304 Water by Karl Fischer 100 mLASTM D6482 Cooling Curve Analysis of Aqueous Polymer Quenchants 1100 mL

ASTM D7420 Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation SRV 100 g

ASTM D7594 Fretting Wear, High Hertzian, High-Frequency, Linear-Oscillation (SRV) 50 g ASTM D8022 Roll Stability, Presence of Water 454 gDIN 51805 Flow Pressure, Kesternich Method 50 gFTM-321 Oil Seperation, Wire Cone Method, Grease 100 gFTM-3005 Dirt Count of Grease 5 gISO 14635-1 FZG Gear Test 2 LISO 14635-2 FZG Gear Test (A10/16.6R/30 or A10/16.6R/90) Custom 2 LISO 14635-3 FZG Gear Test, Grease 3.5 L

Grease Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

30


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• SAVLAB IR Fourier Transform Infra-Red, FTIR, Spectra Only 50 mL

US Steel LT-37 Grease Mobility 50 mL

Grease Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

31


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point, Cleveland Open Cup 250 mL

ASTM D130 Copper Strip Corrosion 100 mL• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, Below 0°C 125 mL• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D664 Acid Number 50 mL

ASTM D665 Rust Prevention 4 Hours (Method A or B) 1 LASTM D665 Rust Prevention 24 Hours (Method A or B) 1 L

• ASTM D892 Foaming, Sequence I - III (Specify option A if required) 1 LASTM D943 Oxidation Characteristics (2.0 TAN or 1000 Hours) 600 mLASTM D1401 Emulsion Characteristics / Water Separability 100 mLASTM D2070 Thermal Stability (Hydraulic Fluids) 300 mLASTM D2112 Oxidation Stability of Inhibited Oil by Pressure Vessel at 140°C 150 mL

• ASTM D2272 Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run 150 mLASTM D2532 Viscosity Stability at Low Temperature 125 mLASTM D2619 Hydrolytic Stability 250 mLASTM D2670 Falex Pin & Vee Wear 200 mL

• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mLASTM D3427 Air Release / Gas Bubble Separation 500 mLASTM D4172 Four Ball Wear 100 mL

• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mLASTM D5621 Sonic Shear, Hydraulic Fluids 100 mL

• ASTM D6304 Water by Karl Fischer 100 mL• ASTM D7624 FTIR Analysis, In-Service Fluid, Nitration 50 mL

ISO 4406 Particle Count 100 mL

Hydraulic Fluid Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

32


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D92 Flash Point, Cleveland Open Cup 250 mL• ASTM D97 Pour Point 100 mL• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D664 Acid Number 50 mL• ASTM D892 Foaming, Sequence I - III (Specify option A if required) 1 L• ASTM D892 & D6082 Foaming, Sequence I - IV (Specify option A if required) 1 L

ASTM D1298 Density / API Gravity, Hydrometer 350 mL• ASTM D2270 Viscosity Index (Includes D445 at 40°C & 100°C) 125 mL

ASTM D2670 Falex Pin & Vee Wear 200 mL• ASTM D2896 Base Number 50 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mL• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5453 Sulfur 10 mL• ASTM D5762 Nitrogen 10 mL• ASTM D5800 Noack Volatility 150 mL• ASTM D6278 Kurt Orbahn Shear Stability, 30 Passes 1 L

ASTM D6795 Engine Oil Filterability (EOFT) 1 L

Marine Lubricant Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

33

Savant Labs is certified as an NMMA testing lab for FC-W and FC-W Catalyst specifications.


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D97 Pour Point 100 mL

ASTM D381 Gum Content of Gasoline (Washed and Unwashed) 50 mL• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL

ASTM D482 Total Ash 80 g ASTM D525 Oxidation Stability (Gasoline) 200 mL

• ASTM D664 Acid Number 50 mLASTM D1298 Density / API Gravity, Hydrometer 350 mLASTM D2274 Oxidation Stability (Petroleum Fuel Oil) 2 LASTM D2500 Cloud Point 100 mL

• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mLASTM D4052 Specific Gravity (Includes API Gravity) 50 mLASTM D4294 Sulfur by XRF - Energy Dispersive 10 mLASTM D4530 Carbon Residue, Micro 150 mLASTM D4737 Cetane Index (Calculated from D1298 and D86) 500 mL

• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mLASTM D6371 Cold Filter Plug Point 150 mLNACE TM0172 Corrosive Properties of Cargoes in Petroleum Product Pipelines 1 LSAVLAB WHAT Fuel Additive Water Uptake 100 mL

2929

34

Marine Fuel Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D445 Kinematic Viscosity, Used or In-Service Oil 125 mL• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D664 Acid Number 50 mL

ASTM D893 Insolubles, Pentane 25 mLASTM D943 Oxidation Characteristics (2.0 TAN or 1000 Hours) 600 mLASTM D943 Oxidation Characteristics (2.0 TAN or 2000 Hours) 600 mLASTM D943 Oxidation Characteristics (2.0 TAN or 3000 Hours) 600 mLASTM D974 Acid Number 50 mLASTM D1401 Emulsion Characteristics, Water Separability 100 mL

• ASTM D2272 Rotating Pressure Vessel Oxidation Test (RPVOT) Single Run 150 mL• ASTM D2272 Rotating Pressure Vessel Oxidation Test (RPVOT) Run to Hard Break 150 mL• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mL

ASTM D2709 Water and Sediment 100 mLASTM D2783 Four Ball Extreme Pressure Up to 400 kg. 200 mLASTM D2783 Four Ball Extreme Pressure Above 400 kg. 200 mL

• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mL• ASTM D5185 Elemental Analysis by Inductively Coupled Plasma (No S) 10 mL• ASTM D6304 Water by Karl Fischer 100 mL• ASTM D7412 FTIR Analysis, In-Service Fluid, Phosphate Anti-Wear 50 mL• ASTM D7414 FTIR Analysis, In-Service Fluid, Oxidation 50 mL• ASTM D7624 FTIR Analysis, In-Service Fluid, Nitration 50 mL• ASTM D7844 FTIR Analysis, In-Service Fluid, Soot 50 mL

ISO 4406 Particle Count 100 mL

Turbine Lubricant Tests Gold bullets indicate ISO/IEC 17025:2017 Accreditation

35


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample Size• ASTM D97 Pour Point 100 mL• ASTM D445 Kinematic Viscosity, 0°C and Above 125 mL• ASTM D445 Kinematic Viscosity, 40°C or 100°C, New Oil 125 mL• ASTM D445 Kinematic Viscosity, Below 0°C 125 mL• ASTM D445 Kinematic Viscosity, Used or In-Service Oil 125 mL

ASTM D1084 B T-Bar Viscosity of Adhesives VariesASTM D1092 Apparent Viscosity, Grease 500 g

• ASTM D2270 Viscosity Index (Includes D445 at 40°C & 100°C) 125 mLASTM D2532 Viscosity Stability at Low Temperature 125 mL

• ASTM D2983 Brookfield Viscosity, +20°C to -60°C (Per Temperature) 60 mL• ASTM D3829 Mini-Rotary Viscosity (MRV), Single Temperature 200 mL

ASTM D4287 High-Shear Viscosity Using a Cone/Plate Viscometer 10 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, New Oil 150 mL• ASTM D4683 High Temperature High Shear / TBS Viscosity, 150°C, Used Oil 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Below 50°C 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Multi-Temperature, Multi-Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Shear 150 mL• ASTM D4683 Mod. High Temperature High Shear / TBS Viscosity, Other Temperature 150 mL• ASTM D4684 TP-1 MRV Viscosity, Single Temperature 100 mL• ASTM D5133 Scanning Brookfield Viscosity (-5°C to -40°C) 50 mL• ASTM D5133 Scanning Brookfield Viscosity, Extended Temperature Range 50 mL

ASTM D5275 Fuel Injector Shear Stability (FISST), 20 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), 30 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), 40 Passes 500 mLASTM D5275 Fuel Injector Shear Stability (FISST), Other Passes 500 mL

• ASTM D5293 Cold Cranking Simulator, Single Temperature 120 mL• ASTM D5293 Mod. Cold Cranking Simulator, Temperature Scan 120 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, New Oil 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Other Shear 150 mL• ASTM D6616 High Temperature High Shear / TBS Viscosity, 100°C, Used Oil 150 mL

CEC L-036-90 Modified High Temperature High Shear Viscosity, 150°C, New Oil 150 mLCEC L-036-90 Modified High Temperature High Shear Viscosity, 150°C, Used Oil 150 mLFTM 203C Stable Pour Point 200 mLSAVLAB CAP Cone and Plate Viscosity 10 mLSAVLAB FEI Fuel Efficiency Index (FEI) 300 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, New Oil 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Shear 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Other Temperature 150 mLSAVLAB TBR High Temperature Low Shear / TBR Viscosity, Used Oil 150 mLSAVLAB VLP Viscosity Loss Profile (VLP), 20 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 30 Passes 1 LSAVLAB VLP Viscosity Loss Profile (VLP), 40 Passes 1 L

Tests by Category Gold bullets indicate ISO/IEC 17025:2017 Accreditation

36

Viscosity


[email protected]

P: 989-496-2301

S A V A N T L A B S

Method Test Description Sample SizeASTM D2266 Four Ball Wear (Grease) 100 gASTM D2509 Timken OK Load for Grease (Specify starting load) 3400 gASTM D2596 Four Ball Extreme Pressure (Grease) Up to 400 kg 500 gASTM D2596 Four Ball Extreme Pressure (Grease) Above 400 kg 500 g

• ASTM D2622 Sulfur by XRF - Wavelength Dispersive 30 mLASTM D2670 Falex Pin & Vee Wear 200 mLASTM D2670 Mod. Falex Pin & Vee Wear - Custom Configuration 200 mLASTM D2711 Demulsibility - Procedure A (No EP Additives) 2 LASTM D2711 Demulsibility - Procedure B (Contains EP Additives) 2 LASTM D2714 Block on Ring Friction and Wear 200 mLASTM D2782 Timken Extreme Pressure (Specify starting load) 4 LASTM D2783 Four Ball Extreme Pressure Up to 400 kg 200 mLASTM D2783 Four Ball Extreme Pressure Above 400 kg 200 mLASTM D3233 Falex Extreme Pressure 200 mLASTM D4170 Fretting Wear, Grease 25 mLASTM D4172 Four Ball Wear 100 mLASTM D4693 Low Temperature Torque, Grease 50 mLASTM D5182 FZG Gear Test - Up to 12 Stages 2 LASTM D5182 FZG Gear Test - Up to 14 Stages 2 LASTM D5183 Coefficient of Friction by Four Ball 100 mLASTM D5620 Drain and Dry Mode Using Falex Pin & Vee Block Test Machine 100 mLASTM D5706 Extreme Pressure Properties of Lubricating Greases Using SRV, Procedure A 20 gASTM D5706 Extreme Pressure Properties of Lubricating Greases Using SRV, Procedure B 20 gASTM D5707 Friction and Wear Properties of Lubricating Grease Using SRV 20 gASTM D6079 Lubricity by HFRR 10 mL


ASTM D7217 Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation SRV 100 g

ASTM D7420 Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequenc

sa v antl ab .c om laboratory testing services · 2021. 1. 26. · • astm d2272 rotating pressure...

Documents