Slide 1

Replace with a photograph

SACEA Fatal Risk Std’s UpdateNorthern Regional Meeting

Paul RedelinghuysUG Maintenance Manager (Khutala Colliery)7 May 2011

• Background• Task Team• Scope of Fatal Risk Standard (FRS)• Fatal Risk Standards (FRS) Perception• Brief Overview of these Fatal Risk Standards

– Light Vehicles– Heavy Duty Vehicles– Livery

• Way Forward• Closure

Slide 2

Topics

• SACMA & SACEA Initiative to address industry requirement on the Fatal Risk Standards (FRS).

• Alignment of Fatal Risk Standards (FRS) attempts within Colliery Industry,

• Industry Confusion with regards to contractors compliance requirements,

• Education of key stakeholders about FRS requirements,

• Best Practice Guideline for all Collieries where Fatal Risk Standards have not been adopted.

Slide 3

Background

• BECSA Paul Redelinghuys• XSTRATA Buks Loock• Anglo American Mike Thuesen

Slide 4

Task Team

• Light Vehicles (LV’s)– A Light Vehicle is a vehicle that has a gross vehicle weight that does not exceed 4500kg

and is/can be registered for use on a public road.

• Heavy Vehicles (HDV’s)– A Heavy Delivery Vehicle (HDV) is a vehicle that has a gross vehicle weight that exceeds

4500kg and is/can be registered for use on a public road.

• Busses– A Heavy Delivery Vehicle (HDV) is a vehicle that has a gross vehicle weight that exceeds

4500kg and is/can be registered for use on a public road.

• Livery– The Identification Signage which will be required on mobile equipment.

Slide 5

Scope of FRS

Slide 6

Fatal Risk Standards Perception

Buildmax FRCP Presentation

• Vehicle Classification– Class A – Vehicles with access to the mines.– Class B – Vehicles with access to operational areas.– Class C – Interaction with EME/SME’s.

• FRS Requirements i.e.:– Seatbelt,– Roll Over Protection Structures,

Slide 7

Brief Overview: LV’s

• FRS Requirements i.e.:– Positive Communication,– Airbag Requirements,– Buggy Whip,– Flashing Lights,– Seat mounting Requirements,– First Aid Kit Requirements,– Chock Blocks,– Fire Suppression Requirements, – Guarding Requirements,– Tire Type Requirements,– Advances in Technology

• IVMS systems for tracking purpose,• Collision Avoidance Requirements

– etc.

Slide 8

Brief Overview: LV’s

• Vehicle Classification– Class A – Vehicles with access to the mines.– Class B – Vehicles with access to operational areas.– Class C – Interaction with EME/SME’s.

Slide 9

Brief Overview: HDV’s

• FRS Requirements i.e.:– Lockout Requirements,– Adequate Walkways,

• 3 – Point Contact

– Chock Blocks,– Rear Under run protection,– ROPS,– Truck mounted Crane requirements,– Advances in Technology:

• IVMS systems for tracking purpose,• Collision Avoidance Requirements

– etc.

Slide 10

Brief Overview: HDV’s

Slide 11

Brief Overview: Livery

Slide 12

Brief Overview: Livery

• Draft Alignment FRS developed for:– Light Vehicles (LV’s),– Heavy Vehicles (HDV’s),– Busses, &– Livery.

• Alignment Session planned 24 May 2011 with following participants:– BECSA Paul Redelinghuys– XSTRATA Buks Loock– Anglo American Mike Thuesen– EXXARO Lou Kilian/Louis Turvey– SASOL Louis Botha

• Reach Agreement for Final Draft by End July 2011• Communication of Final FRS Guideline once agreement reached

Slide 13

Way Forward

Slide 14

Thank you