saf10025 cyclone pro r1 surface drysuit - safequip
TRANSCRIPT
IONIC is a Safequip registered product brandwww.safequip.co.uk
Innovation by Design
SAF10025 Cyclone PRO R1 Surface Drysuit
Safequip Ltd. Reg. Office, Unit 4, Block 3, Dumyat Business Park, Tullibody, Scotland FK10 2PB
Tel: +44 (0)1259 727835Email: [email protected]
IONIC is a Safequip registered product brandwww.safequip.co.uk
FRONT VIEW
Neoprene super stretch neck seal
Olympia high tenacity trilaminate fabric upper body
3600 - 30mm wide reflective detail below the knee reinforcement panel
Protective ankle gaiter
Heavy duty 3 dimensional latex socks
Cordura® 1000D knee reinforcement panels
Bellows pocket with internal gear loop & Velcro closure
Knee reinforcement drainage vents
Olympia high tenacity trilaminate fabric lower body
3600 - 35mm wide reflective detail
Premium Neoprene super stretch cuff seals
All Cyclone PRO R1 drysuits come complete with quick disconnect adjustable braces
SAF10025 Cyclone PRO R1 Front Entry Drysuit
Front entry design with YKK Aquaseal® drysuit zip with cover
IONIC is a Safequip registered product brandwww.safequip.co.uk
REAR VIEW
Cordura® 1000D curved seat reinforcement panel
Reinforcement drainage vents
Elasticated waist
3600 - 35mm wide reflective strips on arms
3600 - 30mm wide reflective detail below the knee reinforcement panel
SAF10025 Cyclone PRO R1 Front Entry Drysuit
IONIC is a Safequip registered product brandwww.safequip.co.uk
SAF10025 Cyclone PRO R1 Front Entry Drysuit
COLOUR OPTIONS
IONIC is a Safequip registered product brandwww.safequip.co.uk
45mm gap in stitching for 50mm velcro tape under flap
Cyclone
• “Cyclone Pro R1” to be screen printed in Reflective Pantone - PT877C
• Font to be Arial Bold
• “Cyclone” Length of logo to be 200mm
• “Pro R1” Length of logo to be 100mm
• “e” in Cyclone to finish in line with bottom of seat reinforcement
Pocket Logo RequirementIONIC Logo 80mm wide
Embroidered on Pocket Flap
Pantone PT431C
SAF10025 Cyclone PRO R1 Front Entry Drysuit
LOWER BODY LOGO PROTOCOL
IONIC is a Safequip registered product brandwww.safequip.co.uk
Red and Black Fabric Cyclone Drysuits
Ionic logo to be screen printed
Reflective Pantone - PT877C
Size 100mm in length / on the centre of the zip cover and finishing 100mm from the end of the seam binding as per diagram
“C” in Ionic finishes 100mm from end of the seam binding for the zip cover.
Yellow and Orange Fabric Cyclone Drysuits
• Ionic logo to be screen printed
• Pantone - Solid Black
• Size 100mm in length / on the centre of the zip cover and finishing 100mm from the end of the seam binding as per diagram
100m
m10
0mm
100m
m10
0mm
SAF10025 Cyclone PRO R1 Front Entry Drysuit
UPPER BODY LOGO PROTOCOL