safety and control that improves workflow....includes: injector head, remote control...
TRANSCRIPT
Committed to Science, Committed to You.™
Touchscreen technology at the patient’s side
Safety and Control That Improves Workflow.Reengineered, setting a new standard.
MR Suite Nuclear SuiteI/Dx SuiteCT Suite
EDA™
Advanced injector engineering puts you in control, right at the patient’s side
A tangible difference in safety
Unique safety enhancements
+ Saline advance: Tests patency and vein integrity at the patient’s side
+ Saline jump: Minimizes the contrast a patient receives
+ Unique patented EDA™ (extravasation detection accessory)*: Provides additional patient safety and peace of mind for the technologist
+ eGFR calculator: Simplifies calculations for evaluation of kidney functions before contrast is delivered
+ Built-in tilt sensor and lock: Reduces the risk of air embolisms
+ Remote control pause: Allows you to start and stop an injection when needed
Saline Advance
* EDA is designed to aid in the detection of extravasations and is not intended as a substitute for proper patient monitoring and good clinical practice.
Committed to Science, Committed to You.™
+ Digital touch technology: Enhances user control and everyday efficiencies
+ Auto initialization: The most efficient way to prepare syringes for filling
+ Protocol fill: Automatically fills syringes to volumes based on the selected protocol
+ Voice prompts: Signals operational status and starts
+ Variable flow rates: Provides greater control to the technologist at the patient’s side or in the control room
+ Simultaneously operating dual syringes: Perform during loading and unloading procedures
Added conveniences for a more streamlined workflowVisionary design for enhanced efficiencies and productivity
Ordering InformationEmpowerCTA®+ Contrast Injection Systems
Includes: Injector head, remote control (Windows®-based operating system), remote control desktop mount, power supply, and all cables and injector pendant switches
To order with:
Pedestal Mount Basic system with rolling floor stand
Ceiling Mount Basic system with overhead ceiling mount
Pedestal Mount With EDA™ Basic system with rolling floor stand, EDA™ module, EDA™ cable
Ceiling Mount With EDA™ Basic system with ceiling mount, EDA™ module, EDA™ cable
Product:
FastLoad™ CTA Dual Syringe Pack With Spikes
Tray includes two 200 mL disposable syringes with bifurcated dual check valve, 60" low-pressure extension set, 1 large transfer spike for saline, and 1 small transfer spike for contrast
FastLoad™ CT Syringe Pack With SpikeTray includes 200 mL disposable syringe with 60" low-pressure extension set and 1 small transfer spike for contrast
Customize your contrast injector experience
IMPORTANT SAFETY INFORMATION: EmpowerCTA®+ Contrast Injection System
INDICATIONS: The EmpowerCTA+ Injector system is intended for the vascular administration of contrast and flushing media. The injector system is used in conjunction with computed tomography (CT) scanning of the body with an optional interface to a CT scanner and an optional calculator for glomerular filtration rate (GFR).
The Extravasation Detection Accessory (EDA) is an optional accessory and is indicated for the detection of extravasations of ionic and nonionic contrast during CT procedures using a power injector.
CONTRAINDICATIONS: The EmpowerCTA+ Injection System is not intended for use as a long-term infusion pump, nor is it intended to be used to inject any agents other than contrast media or flushing media. Do not attempt to use the injector for any other purpose (such as chemotherapy or drug infusion). The EmpowerCTA+ Injection System should not be used to inject substances into nonvascular body cavities. Any applications of the EmpowerCTA+ Injection System other than those described in the User’s Guide are inappropriate and should not be attempted.
Catalog No.102372
102369
102365
102362
SKU No.
017347
017345
Complete instructions for use available upon request.
EmpowerCTA is a registered trademark of Bracco Injeneering SA.EDA and FastLoad are trademarks of Bracco Injeneering SA.
Microsoft and Windows are registered trademarks of Microsoft Corporation.All images shown are representative images from referenced studies. Individual results may vary.Protocols have been independently developed and are not intended as medical advice. Bracco and Bracco Injeneering SA shall not be responsible for any physicians’ reliance on these or any other protocols. Not all products available in all global markets.
Distributed by: Bracco Diagnostics Inc. 259 Prospect Plains Road, Building H Monroe Township, New Jersey 08831 USA Phone: 1-800-631-5245 Fax: 1-609-514-2424Customer Service: 1-877-BRACCO 9 (1-877-272-2269)
Professional Services: 1-800-257-5181 (option 1)
Email: [email protected] Website: usa.braccoimaging.com
Manufactured by: Bracco Injeneering SA Avenue de Sévelin 46 CH - 1004 Lausanne, Switzerland
© 2015 Bracco Diagnostics Inc. All Rights Reserved. 15-011215
Committed to Science, Committed to You.™