safety data sheet...emergency telephone (24 hr) appearance: clear 1-800-527-5722 1-352-323-3500...
TRANSCRIPT
Issue Date: 24-Jun-2016
Product Identifier
Product Name
Other means of identification
Product Code
Safety Data Sheet
Revision Date: 02-Apr-2018 Version: 2
1. IDENTIFICATION
MicroShield 360 Renew
752
Recommended use of the chemical and restrictions on use
Recommended Use Disinfectant
Details of the supplier of the safety data sheet
Manufactured for
MicroShield 360
4700 Rockside Rd, Ste 610
Independence, OH 44131
Telephone Number
Company Phone Number Emergency Telephone (24 hr)
Appearance: Clear
1-800-527-5722
1-352-323-3500 (International)
1-800-535-5053 (North America)
2. HAZARDS IDENTIFICATION
Physical State: Liquid Odor: N.A.
SECTION 2. HAZARDS IDENTIFICATION
GHS Classification
Skin corrosion
Serious eye damage
GHS Label element
Hazard pictograms
Signal word
Hazard statements
Precautionary statements
Category 1
Category 1
Danger
H314 Causes severe skin burns and eye damage. H318
Causes serious eye damage.
Prevention: P264 Wash skin thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response: P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 + P310 IF INHALED: Remove person to fresh air
Page 1 of 9
PC752 Microshield 360
Appropriate engineering controls
Personal protective equipment
Respiratory protection
Hand protection
Remarks
Eye protection
Skin and body protection
Hygiene measures
Revision Date: 02-Apr-2018
In the case of vapor formation use a respirator with an approved filter.
Wear suitable gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of con- tact).
Tightly fitting safety goggles Face-shield
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Rubber or plastic apron Rubber or plastic boots
Wash hands before breaks and immediately after handling the
product.
Avoid contact with skin, eyes and clothing.
Remove and wash contaminated clothing and gloves, including the inside, before re-use.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Color
Odor
Odor Threshold
pH
Melting point/range
Boiling point/boiling range
Flash point
Evaporation rate
Upper explosion limit
Lower explosion limit
Vapour pressure
Relative vapour density
Relative density
liquid
Clear
N.A.
no data available
7.2 - 8.2
not determined
no data available
> 93.33 'C
no data available
no data available
no data available
no data available
Page 4 of 9