safety data sheet for chemical products · 2016. 11. 23. · safety data sheet for chemical...
TRANSCRIPT
-
1/4 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Black [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068244A Rev.2.5.01.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
MAJOR HEALTH HAZARDS: suspect cancer hazard (in animals)
Resins
Additives
-
2/4 Creation Date : February 13, 2013
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHAACGIHEC
Personal protective equipment : Not required.
3.5mg/m3 TWA Carbon Black
oxidizing materials, halogens Carbon Black
3.5mg/m3 TWA Carbon Black
3.5mg/m3 TWA Carbon Black
-UMN-138_Black-
-
3/4 Creation Date : February 13, 2013
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Black.Odor : None odor.pH : about 8.0Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available.Autoignition temperature : Not available.Explosion limits : Not applicable.Density : about 1.1 / 25 CVapor density (air=1) : Not available.Solubility in water : Not available.Evaporation rate : Not available.Volatile : 70-73%
10. STABILITY AND REACTIVITY
Stability : Stability.Hazardous reactions : Will not occur.Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.
Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
InhalationSkin contactEye contact
Ingestion
Specific effects
Carbon Blackirritation
Carbon Black
Carbon BlackIrritant;inhalation, skin
Carbon Blackmechanical irritation,
discoloration of lids
Carbon Blackirritation
Carbon BlackIARC Group 2B
Not available.
Carbon Black>3000mg/kg-Rabbit
Not available.
Carbon Black>10000mg/kg-Rat
Carbon Black
common decomposition products
oxidizing materials, halogens
sulfur compounds
oxides of carbon, water
Lungs may be affected by repeated or prolonged exposure at
very high concentrations.
Carbon Black
-UMN-138_Black-
-
4/4 Creation Date : February 13, 2013
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Carbon Black
EU labeling : Not restricted.
CANADA Hazardous Products Act - Ingredient Disclosure List1%over Carbon Black
Hazard and safety informationProducts are manufactured in accordance with ISO 8124-3 " Safety of Toys - Part 3"
16. OTHER INFORMATION
This sheet completes the technical sheet of use but it doesn't replace it.
The information contained in this sheet are based knowledge of the products
at the data : (February 13, 2013). They are given quite sincerely.
Moreover the attention of the users is drawn on the risks possibly taken,
when a product is used for other utilization than these which it is intended.
-UMN-138_Black-
-
1/5 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Blue [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068245A Rev.2.5.01.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
-
2/5 Creation Date : February 13, 2013
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
acids, bases, combustible materials,
halo carbons, metals, metal salts,
oxidizing materials, reducing agents
1,2-Propanediol
Flush eyes with plenty of water for at least 15 minutes. Then get immediate medical attention.
If swallowed, seek medical advice, and show the MSDS to the physician then.
acids, metals, oxidizing materials Triethanolamine
-UMN-138_Blue-
-
3/5 Creation Date : February 13, 2013
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHAACGIHEC
Personal protective equipment : Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Blue.Odor : None odor.pH : about 8.0Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available. [1,2-Propanediol/ 99 C]Autoignition temperature : Not available. [1,2-Propanediol/ 371 C]Explosion limits : Not applicable.
[ Lower flammable limit / 2.6% , Upper flammable limit / 12.5% ]
Density : about 1.1 / 25 CVapor density (air=1) : Not available. [1,2-Propanediol/ 2.60-2.62]Solubility in water : Not available.Evaporation rate : Not available.Volatile : 72-75%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
Not available.
Not available.
Not available.
Triethanolamineacids, metals, oxidizing materials
1,2-Propanediolacids, bases, combustible materials, halo
carbons, metals, metal salts, oxidizing
materials, reducing agents
Triethanolamineoxides of nitrogen.
common decomposition productsoxides of carbon, water
-UMN-138_Blue-
-
4/5 Creation Date : February 13, 2013
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
Inhalation
Skin contact
Eye contact
Ingestion
Specific effects
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
TriethanolamineIrritant;skin, eye
1,2-Propanediol20800mg/kg-Rabbit
TriethanolamineRepeated or prolonged contact may cause skin sensitization.
1,2-PropanediolRepeated or prolonged contact may cause skin sensitization.
Triethanolaminesore throat,difficulty breathing
1,2-Propanediolnausea,headache
irritation,pain
Triethanolamineirritation,redness
1,2-Propanediolirritation,allergic reaction
TriethanolamineIARC Group 3
Triethanolamineburns,gastrointestinal irritation
1,2-Propanediolallergic reaction,vomiting
Triethanolamineirritation,corneal swelling
1,2-Propanediol
20000mg/kg-Rat
Triethanolamine>16mL/kg-Rat
Not available.
Triethanolamine2200mg/kg-Rabbit
5846mg/kg-Mouse
1,2-Propanediol
-UMN-138_Blue-
-
5/5 Creation Date : February 13, 2013
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Triethanolamine
EU labeling : Not restricted.
CANADA Hazardous Products Act - Ingredient Disclosure List1%over 1,2-Propanediol/ Triethanolamine
Hazard and safety informationProducts are manufactured in accordance with ISO 8124-3 " Safety of Toys - Part 3"
16. OTHER INFORMATION
This sheet completes the technical sheet of use but it doesn't replace it.
The information contained in this sheet are based knowledge of the products
at the data : (February 13, 2013). They are given quite sincerely.
Moreover the attention of the users is drawn on the risks possibly taken,
when a product is used for other utilization than these which it is intended.
-UMN-138_Blue-
-
1/5 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Red [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068246A Rev.2.5.01.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
2034733
Coloring agent Registered
Registered Registered 10- 30
Resins Registered Registered
-
2/5 Creation Date : February 13, 2013
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
Flush eyes with plenty of water for at least 15 minutes. Then get immediate medical attention.
If swallowed, seek medical advice, and show the MSDS to the physician then.
oxidizing materials, bases, acids,
reducing agents, metals
Ethylene glycol
acids, bases, combustible materials,
halo carbons, metals, metal salts,
oxidizing materials, reducing agents
1,2-Propanediol
-UMN-138_Red-
-
3/5 Creation Date : February 13, 2013
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHAACGIHEC
Personal protective equipment : Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Red.Odor : None odor.pH : about 8.0Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available. [1,2-Propanediol/ 99 C]Autoignition temperature : Not available. [1,2-Propanediol/ 371 C]Explosion limits : Not applicable.
[ Lower flammable limit / 2.6% , Upper flammable limit / 12.5% ]
Density : about 1.1 / 25 CVapor density (air=1) : Not available. [1,2-Propanediol/ 2.60-2.62]Solubility in water : Not available.Evaporation rate : Not available.Volatile : 71-74%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
ceiling 100mg/m3 (particulate)(aerosol) Ethylene glycol
Not available.
Ethylene glycol
acids, bases, combustible materials, halo
carbons, metals, metal salts, oxidizing
materials, reducing agents
oxidizing materials, bases, acids, reducing
agents, metals
52mg/m3(20ppm) TWA(skin)
104mg/m3(40ppm) STEL(skin)Ethylene glycol
common decomposition productsoxides of carbon, water
1,2-Propanediol
-UMN-138_Red-
-
4/5 Creation Date : February 13, 2013
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
Inhalation
Skin contact
Eye contact
Ingestion
Specific effects
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
1,2-Propanediol
Ethylene glycol
Repeated or prolonged contact may cause skin sensitization .
The substance may have effects on the central nervous
system, resulting in abnormal eye movements (nystagmus).
1,2-Propanediol
Ethylene glycol
nausea,headache
irritation,cough
1,2-Propanediol
Ethylene glycol
irritation,allergic reaction
irritation,dry
1,2-Propanediol
Ethylene glycol
irritation,pain
irritation,redness
Not available.
1,2-Propanediol
Ethylene glycol
allergic reaction,vomiting
nausea,vomiting
Irritant;inhalation, skin, eye
20000mg/kg-Rat
Ethylene glycol
Ethylene glycol
1,2-Propanediol20800mg/kg-Rabbit
Not available.
9530uL/kg-Rabbit
Ethylene glycol1650mg/kg-Cat
4700mg/kg-Rat
1,2-Propanediol
-UMN-138_Red-
-
5/5 Creation Date : February 13, 2013
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Ethylene glycol
EU labeling25%
-
1/5 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Orange [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068247A Rev.2.5.02.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
-
2/5 Creation Date : February 13, 2013
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
Flush eyes with plenty of water for at least 15 minutes. Then get immediate medical attention.
If swallowed, seek medical advice, and show the MSDS to the physician then.
oxidizing materials, bases, acids,
reducing agents, metals
Ethylene glycol
acids, bases, oxidizing materials, metal
oxides, peroxides, reducing agents
Glycerine
-UMN-138_Orange-
-
3/5 Creation Date : February 13, 2013
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHA
ACGIH
EC
Personal protective equipment : Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Orange.Odor : None odor.pH : about 8.0Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available.Autoignition temperature : Not available.Explosion limits : Not applicable.Density : about 1.1 / 25 CVapor density (air=1) : Not available.Solubility in water : Not available.Evaporation rate : Not available.Volatile : 77-80%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
5mg/m3 TWA(respirable dust fraction)
15mg/m3 TWA (total dust)Glycerine
52mg/m3(20ppm) TWA(skin)
104mg/m3(40ppm) STEL(skin)Ethylene glycol
ceiling 100mg/m3 (particulate)(aerosol) Ethylene glycol10mg/m3 TWA(mist) Glycerine
Glycerineacids, bases, oxidizing materials, metal oxides,
peroxides, reducing agents
Ethylene glycoloxidizing materials, bases, acids, reducing
agents, metals
Glycerinecorrosive acrolein.
common decomposition productsoxides of carbon, water
-UMN-138_Orange-
-
4/5 Creation Date : February 13, 2013
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
InhalationSkin contact
Eye contact
Ingestion
Specific effects
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
Ethylene glycolThe substance may have effects on the central nervoussystem, resulting in abnormal eye movements (nystagmus).
Glycerine
9530uL/kg-Rabbit
>10000mg/kg-Rabbit
Irritant;inhalation, skin, eye
irritation,redness
Ethylene glycolirritation,dry
Glycerineirritation,difficulty breathing
Not available.
Ethylene glycol / Glycerinenausea,vomiting
Glycerinetearing,stinging
Ethylene glycolirritation,redness
Glycerine
Ethylene glycol
Ethylene glycol
Glycerine>570mg/m3-1H-Rat
Ethylene glycol
Glycerine
1650mg/kg-Cat
4700mg/kg-Rat
4090mg/kg-Mouse
-UMN-138_Orange-
-
5/5 Creation Date : February 13, 2013
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Ethylene glycol / Glycerine
EU labeling25%
-
1/5 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Blue black [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068248A Rev.2.5.01.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
Registered
Registered
Resins
Carbon Black
Registered Registered
1,2-Propanediol 57-55-6 Registered 2003380
Coloring agent Registered Registered
range (wt%)
-
2/5 Creation Date : February 13, 2013
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
acids, bases, combustible materials,
halo carbons, metals, metal salts,
oxidizing materials, reducing agents
1,2-Propanediol
Flush eyes with plenty of water for at least 15 minutes. Then get immediate medical attention.
If swallowed, seek medical advice, and show the MSDS to the physician then.
oxidizing materials, halogens Carbon Black
-UMN-138_Blue black-
-
3/5 Creation Date : February 13, 2013
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHAACGIHEC
Personal protective equipment : Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Blue black.Odor : None odor.pH : about 8.0Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available. [1,2-Propanediol/ 99 C]Autoignition temperature : Not available. [1,2-Propanediol/ 371 C]Explosion limits : Not applicable.
[ Lower flammable limit / 2.6% , Upper flammable limit / 12.5% ]
Density : about 1.1 / 25 CVapor density (air=1) : Not available. [1,2-Propanediol/ 2.60-2.62]Solubility in water : Not available.Evaporation rate : Not available.Volatile : 80-83%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
3.5mg/m3 TWA Carbon Black3.5mg/m3 TWA Carbon Black3.5mg/m3 TWA Carbon Black
1,2-Propanediolacids, bases, combustible materials, halo
carbons, metals, metal salts, oxidizing
materials, reducing agents
Carbon Blackoxidizing materials, halogens
common decomposition productsoxides of carbon, water
Carbon Blacksulfur compounds
-UMN-138_Blue black-
-
4/5 Creation Date : February 13, 2013
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
Inhalation
Skin contact
Eye contact
Ingestion
Specific effects
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
1,2-Propanediol20000mg/kg-Rat
Carbon Black>10000mg/kg-Rat
Not available.
1,2-Propanediol20800mg/kg-Rabbit
Carbon BlackIrritant;inhalation, skin
Carbon Black>3000mg/kg-Rabbit
1,2-PropanediolRepeated or prolonged contact may cause skin sensitization.
Carbon BlackLungs may be affected by repeated or prolonged exposure atvery high concentrations.
1,2-Propanediolnausea,headache
Carbon Blackirritation
1,2-Propanediolirritation,allergic reaction
Carbon Blackirritation
1,2-Propanediolirritation,pain
Carbon Blackmechanical irritation,
discoloration of lids
1,2-Propanediolallergic reaction,vomiting
Carbon BlackIARC Group 2B
-UMN-138_Blue black-
-
5/5 Creation Date : February 13, 2013
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Carbon Black
EU labeling : Not restricted.
CANADA Hazardous Products Act - Ingredient Disclosure List1%over Carbon Black
Hazard and safety informationProducts are manufactured in accordance with ISO 8124-3 " Safety of Toys - Part 3"
16. OTHER INFORMATION
This sheet completes the technical sheet of use but it doesn't replace it.
The information contained in this sheet are based knowledge of the products
at the data : (February 13, 2013). They are given quite sincerely.
Moreover the attention of the users is drawn on the risks possibly taken,
when a product is used for other utilization than these which it is intended.
-UMN-138_Blue black-
-
1/4 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Light blue [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068249A Rev.2.5.01.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
-
2/4 Creation Date : February 13, 2013
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHA
ACGIHEC
Personal protective equipment : Not required.
acids, bases, combustible materials,
halo carbons, metals, metal salts,
oxidizing materials, reducing agents
1,2-Propanediol
5mg/m3 TWA(respirable dust fraction)
15mg/m3 TWA (total dust)Glycerine
acids, bases, oxidizing materials, metal
oxides, peroxides, reducing agents
Glycerine
Not available.
10mg/m3 TWA(mist) Glycerine
-UMN-138_Light blue-
-
3/4 Creation Date : February 13, 2013
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Black.Odor : None odor.pH : about 8.5Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available. [1,2-Propanediol/ 99 C]Autoignition temperature : Not available. [1,2-Propanediol/ 371 C]Explosion limits : Not applicable.
[ Lower flammable limit / 2.6% , Upper flammable limit / 12.5% ]
Density : about 1.1 / 25 CVapor density (air=1) : Not available. [1,2-Propanediol/ 2.60-2.62]Solubility in water : Not available.Evaporation rate : Not available.Volatile : 91-94%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Glycerineacids, bases, oxidizing materials, metal oxides,
peroxides, reducing agents
1,2-Propanediolacids, bases, combustible materials, halo
carbons, metals, metal salts, oxidizing
materials, reducing agents
Glycerinecorrosive acrolein.
common decomposition productsoxides of carbon, water
>570mg/m3-1H-Rat
Glycerine4090mg/kg-Mouse
1,2-Propanediol
1,2-PropanediolRepeated or prolonged contact may cause skin sensitization.
Not available.
20000mg/kg-Rat
Glycerine>10000mg/kg-Rabbit
1,2-Propanediol20800mg/kg-Rabbit
Glycerine
-UMN-138_Light blue-
-
4/4 Creation Date : February 13, 2013
Signs and Symptoms of overexposure and aggravated by exposure
Inhalation
Skin contactEye contact
Ingestion
Specific effects
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Glycerine
EU labeling : Not restricted.
CANADA Hazardous Products Act - Ingredient Disclosure List1%over 1,2-Propanediol
Hazard and safety informationProducts are manufactured in accordance with ISO 8124-3 " Safety of Toys - Part 3"
16. OTHER INFORMATION
This sheet completes the technical sheet of use but it doesn't replace it.
The information contained in this sheet are based knowledge of the products
at the data : (February 13, 2013). They are given quite sincerely.
Moreover the attention of the users is drawn on the risks possibly taken,
when a product is used for other utilization than these which it is intended.
1,2-Propanediolnausea,headache
1,2-Propanediolirritation,allergic reaction
Glycerineirritation,difficulty breathing
Glycerinetearing,stinging
1,2-Propanediolirritation,pain
Not available.
1,2-Propanediol
Glycerine
allergic reaction,vomiting
nausea,vomiting
-UMN-138_Light blue-
-
1/5 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Lavender black [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068250A Rev.2.5.02.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Skin contact:
Eye contact:
Ethylene glycol 107-21-1 Registered 2034733
56-81-5 Registered 2002895
-
2/5 Creation Date : February 13, 2013
Ingestion:
[Ink quantity of product : about 0.4g]
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
acids, bases, combustible materials,
halo carbons, metals, metal salts,
oxidizing materials, reducing agents
1,2-Propanediol
If swallowed, seek medical advice, and show the MSDS to the physician then.
oxidizing materials, bases, acids,
reducing agents, metals
Ethylene glycol
acids, bases, oxidizing materials, metal
oxides, peroxides, reducing agents
Glycerine
-UMN-138_Lavender black -
-
3/5 Creation Date : February 13, 2013
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHA
ACGIH
EC
Personal protective equipment : Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Lavender black.Odor : None odor.pH : about 8.5Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available. [1,2-Propanediol/ 99 C]Autoignition temperature : Not available. [1,2-Propanediol/ 371 C]Explosion limits : Not applicable.
[ Lower flammable limit / 2.6% , Upper flammable limit / 12.5% ]
Density : about 1.1 / 25 CVapor density (air=1) : Not available. [1,2-Propanediol/ 2.60-2.62]Solubility in water : Not available.Evaporation rate : Not available.Volatile : 86-89%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
5mg/m3 TWA(respirable dust fraction)
15mg/m3 TWA (total dust)Glycerine
52mg/m3(20ppm) TWA(skin)
104mg/m3(40ppm) STEL(skin)Ethylene glycol
ceiling 100mg/m3 (particulate)(aerosol) Ethylene glycol10mg/m3 TWA(mist) Glycerine
Glycerineacids, bases, oxidizing materials, metal oxides,
peroxides, reducing agents
1,2-Propanediol
Ethylene glycol
acids, bases, combustible materials, halo
carbons, metals, metal salts, oxidizing
materials, reducing agents
oxidizing materials, bases, acids, reducing
agents, metals
Glycerinecorrosive acrolein.
common decomposition productsoxides of carbon, water
-UMN-138_Lavender black -
-
4/5 Creation Date : February 13, 2013
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
Inhalation
Skin contact
Eye contact
Ingestion
Specific effects
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
1,2-Propanediol
20800mg/kg-Rabbit
Glycerine>570mg/m3-1H-Rat
Ethylene glycol
Glycerine
1650mg/kg-Cat
4700mg/kg-Rat
4090mg/kg-Mouse
1,2-Propanediol
Ethylene glycol
Repeated or prolonged contact may cause skin sensitization.
The substance may have effects on the central nervous
system, resulting in abnormal eye movements (nystagmus).
Glycerineirritation,difficulty breathing
1,2-Propanediol
Ethylene glycol
nausea,headache
irritation,cough
Glycerineirritation,redness
1,2-Propanediol
Ethylene glycol
irritation,allergic reaction
irritation,dry
tearing,stinging
1,2-Propanediol
Ethylene glycol
irritation,pain
irritation,redness
No data available.
1,2-Propanediol
Ethylene glycol / Glycerine
allergic reaction,vomiting
nausea,vomiting
Glycerine
Irritant;inhalation, skin, eye
20000mg/kg-Rat
Ethylene glycol
Ethylene glycol
Glycerine
9530uL/kg-Rabbit
>10000mg/kg-Rabbit
1,2-Propanediol
-UMN-138_Lavender black -
-
5/5 Creation Date : February 13, 2013
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Ethylene glycol / Glycerine
EU labeling25%
-
1/5 Creation Date : February 13, 2013
Safety data sheet for chemical products
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: UMN-138 Pink [ uni-ball Signo RT ]
Manufacture's name : MITSUBISHI PENCIL CO.,LTD.Address : 5-23-37, HIGASHIOHI, SHINAGAWA, TOKYO, JAPANTelephone number : 03-3458-6281 Telefax number : 03-3450-0363
Creation Date : February 13, 2013Revision DateFile No. : 068251A Rev.2.5.02.01
2. COMPOSITION/INFORMATION ON INGREDIENTS
The chemical product is a substance or a preparation : Preparation
Chemical nature: Component parts : Ink
Other parts : Other parts are excluded from 'chemical substances'.
3. HAZARDS IDENTIFICATION
Most important hazards : Not available.
Specific hazards : Information of components.
4. FIRST-AID MEASURES
Inhalation:
Ethylene glycol 107-21-1 Registered 2034733
1-Propanol,2-amino-2-methyl 124-68-5
-
2/5 Creation Date : February 13, 2013
Skin contact:
Eye contact:
Ingestion:
[Ink quantity of product : about 0.4g]
5. FIRE-FIGHTING MEASURES
Fire and explosion measures : Slight fire hazard.Extinguishing media:
Suitable : regular dry chemical, carbon dioxide, water, regular foam.Large fires : Use regular foam or flood with fine water spray.
Fire fighting : The Products is no flammable.Use extinguishing agents appropriate for surrounding fire.
Avoid inhalation of material or combustion by-products.
Stay upwind and keep out of low areas.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions : Not available.Environmental precautions : Do not wash away into shower or water way.Methods for cleaning up : Wipe off by dry cloth and wash with water.
: In accordance with national, state and local regulations.
7. HANDLING AND STORAGE
Store and handle in accordance with all current regulations and standards.Keep separated from incompatible substances.
Handling:Technical measures : Don't swallow ink.
: Don't shake.
: Keep out of the reach of infants.
: Avoid contact with skin and eyes.
Precautions : Not available.Safe handling advice : Not available.
Storage:Technical measures : Keep away from oxidizing materials, ignition sources and
high temperature.
Storage condition : Avoid direct sunlight.: Do not leave the products in high temperature space.
: Recommended temperature: 0-30 C.
Wash skin with soap and water for at least 15 minutes while removing contaminated
clothing and shoes. Get medical attention, if needed. Thoroughly clean and dry
contaminated clothing and shoes before reuse.
Flush eyes with plenty of water for at least 15 minutes. Then get immediate medical attention.
If swallowed, seek medical advice, and show the MSDS to the physician then.
-UMN-138_Pink-
-
3/5 Creation Date : February 13, 2013
Incompatible products : (Information of components.)
Packaging materials : Not applicable.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering measures : Not required.
Control parameters (Information of components.)
OSHA
ACGIH
EC
Personal protective equipment : Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] : Information of components.
Physical state : Liquid.Color : Pink.Odor : None odor.pH : about 8.5Boiling point : Not available. [Water/ 100 C]Melting point : Not available.Flash point : Not available. [1,2-Propanediol/ 99 C]Autoignition temperature : Not available. [1,2-Propanediol/ 371 C]Explosion limits : Not applicable.
[ Lower flammable limit / 2.6% , Upper flammable limit / 12.5% ]
Density : about 1.1 / 25 CVapor density (air=1) : Not available. [1,2-Propanediol/ 2.60-2.62]Solubility in water : Not available.Evaporation rate : Not available.Volatile : 73-76%
10. STABILITY AND REACTIVITY
Stability : Stability.
Hazardous reactions : Will not occur.
Conditions to avoid : Avoid heat, flames, sparks and other sources of ignition.Avoid contact with incompatible materials.
acids, bases, combustible materials,
halo carbons, metals, metal salts,
oxidizing materials, reducing agents
1,2-Propanediol
oxidizing materials, bases, acids,
reducing agents, metals
Ethylene glycol
acids, bases, oxidizing materials, metal
oxides, peroxides, reducing agents
Glycerine
5mg/m3 TWA(respirable dust fraction)
15mg/m3 TWA (total dust)Glycerine
acids, oxidizing materials 1-Propanol,2-amino-2-methyl
52mg/m3(20ppm) TWA(skin)
104mg/m3(40ppm) STEL(skin)Ethylene glycol
ceiling 100mg/m3 (particulate)(aerosol) Ethylene glycol10mg/m3 TWA(mist) Glycerine
-UMN-138_Pink-
-
4/5 Creation Date : February 13, 2013
Materials to avoid : (Information of components.)
Hazardous decomposition products : (Information of components.)
11.TOXICOLOGICAL INFORMATION
(Information of components)
Acute toxicity
Ingestion LD50
Inhalation LC50Skin LD50
Local effects
Chronic toxicity and long term toxicity
Signs and Symptoms of overexposure and aggravated by exposure
Inhalation
Skin contact
Eye contact
Ingestion
Specific effects
Ethylene glycol / 1-Propanol,2-amino-2-methyl
Glycerineacids, bases, oxidizing materials, metal oxides,
peroxides, reducing agents
1,2-Propanediol
Ethylene glycol
acids, bases, combustible materials, halo
carbons, metals, metal salts, oxidizing
materials, reducing agents
oxidizing materials, bases, acids, reducing
agents, metals
common decomposition productsoxides of carbon, water
1-Propanol,2-amino-2-methylacids, oxidizing materials
1,2-Propanediol
1-Propanol,2-amino-2-methyloxides of nitrogen.
Glycerinecorrosive acrolein.
Ethylene glycol
Glycerine
1650mg/kg-Cat
4700mg/kg-Rat
4090mg/kg-Mouse
Glycerine>570mg/m3-1H-Rat
1-Propanol,2-amino-2-methyl2150mg/kg-Mouse
1,2-Propanediol
Ethylene glycol
Repeated or prolonged contact may cause skin sensitization.
The substance may have effects on the central nervous
system, resulting in abnormal eye movements (nystagmus).
Glycerineirritation,difficulty breathing
1,2-Propanediol
Ethylene glycol
1-Propanol,2-amino-2-methyl
nausea,headache
irritation,cough
1,2-Propanediol
Ethylene glycol
irritation,allergic reaction
irritation,dry
1-Propanol,2-amino-2-methylirritation,burn
Glycerineirritation,redness
1,2-Propanediol
Ethylene glycol
irritation,pain
irritation,redness
1-Propanol,2-amino-2-methylirritation,eye damage
Glycerinetearing,stinging
Not available.
1-Propanol,2-amino-2-methylsensation,headache
1,2-Propanediol
Ethylene glycol / Glycerine
allergic reaction,vomiting
nausea,vomiting
Irritant;inhalation, skin, eye
20000mg/kg-Rat
Ethylene glycol
Glycerine
9530uL/kg-Rabbit
>10000mg/kg-Rabbit
1,2-Propanediol20800mg/kg-Rabbit
-UMN-138_Pink-
-
5/5 Creation Date : February 13, 2013
12. ECOLOGICAL INFORMATION
Not available.
13. DISPOSAL CONSIDERATIONS
Waste from residues : Disposal in accordance with all current regulations and standards.
Contaminated packaging : Not applicable.
14. TRANSPORT INFORMATION
HS Code : 960810
15. REGULATORY INFORMATION
Regulations (Information of components)Hazardous chemicals (OSHA HCS) : Ethylene glycol / Glycerine
EU labeling25%