7/30/2019 Safety Instrumented Systems-Outlines

http://slidepdf.com/reader/full/safety-instrumented-systems-outlines 1/2

Course Information Sheet

tle Safety Instrumented Systems 

ef 

ate & Dur. 

ocation

escription

The course provides an overview of the key concepts associated with Functional SafetyEngineering, covering in depth the entire safety life cycle and will help you develop a thoroughunderstanding of the Safety Instrumented Systems (SIS) by covering Process Hazard and riskanalysis, management of functional safety, SIL determination, Layer of Protection Analysis,basics of Safety Instrumented Systems (SIS) design and implementation requirements based oncurrent and emerging standards and covers design verification techniques. Real life exampleswill be discussed to enforce the teaching. The content is well suited for managers, engineeringprofessionals, technicians, and sales personnel who would like to formalize their knowledgebase.

bjective

You will be able to:

Differentiate between process control and safety control

Implement the ISA84 (IEC 61511) standard

Evaluate process risk levels

Select Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety

of techniques

Analyze the performance of different logic system technologies

Analyze the performance of various sensor, logic, and final element configurations, as well as

the impact of diagnostics, test intervals, common cause, system size, imperfect manual testing,

and bypassing

Determine optimum system test intervals

Specify and select safety instrumented systems

Apply the documentation requirements for process safety management, regulations, and

industry standards

Who should Attend

Who should attend: • Professionals who need to understand the concepts and principles of IEC

61508 and IEC 61511 • Loss Prevention Professionals • Risk Professionals

• Safety & Reliability Engineers & Co-ordinators • Instrumentation Engineers & Technologists •Maintenance Engineers & Technicians • Consulting Engineers • Management Personnel  

nstructor Dr. Montasser Tahat

7/30/2019 Safety Instrumented Systems-Outlines

http://slidepdf.com/reader/full/safety-instrumented-systems-outlines 2/2

utline

Introduction: Accidents and Resulting Regulations | Lessons Learned From Past

Accidents | Standards & Guidelines of Interest

• Scope & Safety Life Cycle: Management Issues | Design Life Cycle | 

• Safety Layers: Independent Safety Layers | Separation of Control and Safety 

• Risk, Hazard Analysis, Safety Integrity Levels: Hazard Identification | Risk

Assessment | Selecting Safety Integrity Levels | Layer of Protection Analysis

• Failure Modes & Reliability Concepts: Safe vs. Dangerous | Failure Mode vs.Technology | Failure Rates | Modeling Techniques | Test Intervals | Fault Tolerance

Requirements

• System Technologies: Pneumatic | Relay | Microprocessor | Field Devices |

Certification | Prior Use

• System Design: Requirements Specification | General Design Issues

(Environment, Interfaces, Bypasses, Resets, etc.)

• Operations and Maintenance: Installation | Operation & Maintenance | Testing |

Management of Change | Decommissioning

dditional Info.