sap grc global trade services 7.2 - preferred practice- us–automated export systems (us-aes)
DESCRIPTION
SAP GRC gtc differenceTRANSCRIPT
SAP GRC Global Trade Services 7.2
Preferred Practice
US – Automated Export Systems (AES)
SAP GRC Updated September 2010
2
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD 1. Table of Contents
1. Introduction ..................................................................................................................................................3 2. Prerequisites .................................................................................................................................................4
3. Scenario Description ....................................................................................................................................5 4. Process Diagram ...........................................................................................................................................5 5. Step By Step Procedure ................................................................................................................................6
5.1 Foreign Trade Organization and Legal Unit .........................................................................................6
5.2 Set Up the Legal Regulation ...............................................................................................................12
5.3 Define and Assign the Determination Procedure ................................................................................12
5.4 Activate the Legal Regulation ............................................................................................................14
5.5 Configuring Messages for Post Processing Framework (PPF) Actions for Customs
Shipments/Declarations .................................................................................................................................15
5.6 Check Electronic Messages ................................................................................................................17
5.7 Customs Management Service Control ..............................................................................................22
5.8 Set Up the Process Flow for Customs Processing with AES ..............................................................23
5.9 Define Rules for Message Output .......................................................................................................26
5.10 Customs Code Lists .........................................................................................................................27
5.11 Partner Group ..................................................................................................................................29
5.12 Document Type ...............................................................................................................................30
5.13 Setup Communication Process ........................................................................................................33
5.14 Print Control for Documents ...........................................................................................................35
5.15 Message and Printer Determinations ...............................................................................................36
5.16 Defaulting Data ...............................................................................................................................39
5.17 Sample IDoc of Customs Declaration .............................................................................................41
6. Comments and Feedbacks ..........................................................................................................................43
3
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
1. Introduction
SAP GRC Global Trade Services (GTS) release 7.2 provides automatic communications with US Customs
and Border Patrol (CBP) system – Automated Export Systems (US-AES).
As of June 2, 2008 the CBP released this notice.
Mandatory Automated Export System (AES) Filing for all Shipments Requiring Shipper’s Export Declaration (SED) information The U.S. Census Bureau has issued the final rule implementing provisions in the Foreign Relations Authorization Act, Public Law 107-228. This rule was published in the Federal Register on June 2, 2008, amending Title 15, Code of Federal Regulations, Part 30, Foreign Trade Regulations (FTR) in its entirety. Effective July 2, 2008, the Census Bureau is requiring mandatory filing of export information through the Automated Export System (AES) or through the AESDirect for all shipments where a Shipper’s Export Declaration (SED) is required. We are also providing the trade an additional 90 days to implement these new requirements. After the 90-day implementation period, which ends September 30, 2008, you must file your export information electronically through the AES or AESDirect. Additionally, these new regulations have tougher penalty provisions that affect everyone in the export process. Penalties may be imposed per violation of the FTR from $1,100 to $10,000 both civil and criminal, for the delayed filing, failure to file, false filing of export information, and/or using the AES to further any illegal activity. Also, all AES filers are faced with new filing deadlines by mode of transportation for reporting export information. It is important that you understand these new requirements so that you avoid the increased penalties and seizure of your commodities. The Census Bureau has instructed filers of export information to make every effort to submit these data via the AES or AESDirect to eliminate the use of paper SEDs immediately. During the 120-day implementation phase, the Census Bureau will use “informed compliance” to outreach to filers identified in violation of the FTR. Anyone submitting paper after September 30, 2008 will be in violation of the FTR and subject to penalties.
The following is a guide for the implementation of the functionality of US-AES with SAP GTS 7.2 and SAP
ECC 6.0 as a preferred practice. Once this guide is completed, the implementer should be able to
communicate successfully with the Customs office.
4
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
2. Prerequisites
PREREQUISITE DETAILS
SAP GRC Global Trade Services GTS Release 7.2 Required
Required components and Support Packages for SLL-LEG 7.20
SAP_BASIS 700 SAPKB70010
SAP_ABA 700 SAPKA70010
PI_BASIS 2005_1_700 SAPKIPYJ7A
SAP_BW 700 SAPKW70010
SAP_AP 700 SAPKNA7005
Support Packages for SLL-LEG 7.20
Note 1113991
SAP ERP backend system for
logistics processing
ECC 6.0 – Configuration and enhancements will need to be done to determine
the billing documents and information that come over to GTS Customs
Processing. (Not included in this documentation.)
R/3 plug-in for SAP Global Trade Services (SAP GTS)
Note 858706
Seeburger Adapter One of the adapters that can be used for the EDI communication. Plan and budget for approximately one week of time and cost for Seeburger Consulting. The adapter (client software, interface maps) is included in the GTS license, but the installation and configuration activities performed by Seeburger are not. Here is the contact information of Seeburger: Phone: (770) 604-3888 Website: http://www.seeburger.com/. Please refer to SAP Note 1106268, and 1453578 for detailed mapping information.
Customs Communication
Authorization
Request and receive authorization for electronic communication with a Customs
Office, this would include ID and password.
Letter of Intent Complete and submit a letter of intent to US Customs as soon as possible. It can take a long time (months) to have a Customs Case Officer assigned and engaged. i. You can find the LOI form here: http://www.cbp.gov/xp/cgov/trade/automated/aes/letter_intent/form_commodity_data.xml ii. And instructions/overview here:
http://www.cbp.gov/xp/cgov/trade/automated/aes/letter_intent/register.xml
IDoc Customizing IDocs are used for the communication with customs offices. IDocs capture the
necessary data used by the Seeburger adapter to send information to customs
offices in the correct format.
5
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
3. Scenario Description
This process describes the export of product from IDES US, USA to IDES AG, Germany. The product is
subject to authorization. The foreign trade relevant activities are fully integrated in the logistic process. The
relevant export documents for AES are available and can be printed at the end of the process.
4. Process Diagram
6
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5. Step By Step Procedure
5.1 Foreign Trade Organization and Legal Unit
SAP Global Trade Services (SAP GTS) uses the SAP Business Partner Concept. You create a business
partner for each party (person, organization) involved in foreign trade business. Within the individual
business transactions, such as an import transaction, a business partner can take on various partner functions,
providing the business partner meets the relevant requirements.
When creating both foreign trade organization and legal unit, you have to at least enter the address and assign
the relevant role for each business partner.
Foreign Trade Organization
SPRO → SAP Global Trade Services → General Settings → Organizational Structure → Define Foreign
Trade Organizations
7
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Maintain the business partner in role “SLLFTO” for Foreign Trade Organization:
Legal Unit
SPRO → SAP Global Trade Services → General Settings → Organizational Structure → Define Legal Units
8
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Maintain the business partner in role “SLLSIT” for Legal Unit:
9
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Assign company code to Foreign Trade Organization (FTO)
SPRO → SAP Global Trade Services → General Settings → Organizational Structure → Assignment of
Organizational Units from Feeder System to Foreign Trade Org:
The Foreign Trade Organization (FTO) can be assigned at Feeder System Level or Feeder System Group
Level. It depends on if you have set up a Feeder System Group or not.
You can manually assign or automatically transfer company codes from feeder system to FTO.
If you choose to do it automatically, double click on “Automatically Transfer Company Code”. You will
have to enter the Logical System (Feeder System) from where data is to be transferred, and enter the FTO to
assign the company code.
If you choose to do it manually, double click on “Manually Assign Company Code”, and then select the
button “New Entries”. Enter the company code information and match it to your desired FTO.
10
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Assign Legal Unit to Foreign Trade Organization
SPRO → SAP Global Trade Services → General Settings → Organizational Structure → Assign Legal Unit
to the Foreign Trade Organization:
11
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Assign Plant from Feeder System to Legal Unit
SPRO → SAP Global Trade Services → General Settings → Organizational Structure → Assignment of
Organizational Units from Feeder System to Legal Unit
You can assign the plant from feeder system to the legal unit either at Feeder System or Feeder System
Group level. You have the options to do it manually or automatically. If you select to do it automatically, you
need to enter the feeder system. If you select to do it manually, click the button “New entries”, then chose the
Legal Units to assign the plant from the feeder system.
12
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD 5.2 Set Up the Legal Regulation
Legal regulations are the central control elements for services performed in GTS. Here you define which laws
are checked for export and import processes. In addition, you assign different deadline types to each legal
regulation and the country groups a legal regulation is valid for. If country groups are used during the license
determination, you need to define the country groups first.
SPRO → SAP Global Trade Services → General Settings → Legal Regulations → Define Legal Regulation
Note:
1) This legal regulation represents the procedure of AES
2) The Type of Legal Code is: Customs Processing
3) The country from which the legal regulation was issued is: US
5.3 Define and Assign the Determination Procedure
You have to enter a determination procedure to enable the system to determine the legal regulations for a
service. To do so, you assign the determination table to the determination procedure. The system can then
uses the departure country (export) and the destination country (import) to determine the legal regulations.
13
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD You can also define for each determination procedure whether the system stops determination as soon as it
finds the first active legal regulation or whether it goes through all the available active legal regulations for
the service. If your logistics processes involve several countries and legal regulations in a service, this lets
you perform the checks and determination for several legal regulations.
Define Determination Procedure
SPRO → SAP Global Trade Services → General Settings → Legal Regulations → Define Determination
Procedure for Active Legal Regulations
Assign Determination Procedure to Service
SPRO → SAP Global Trade Services → SAP Customs Management → “Customs Processing” Service →
Assign Determination Procedure for Active Legal Regulations
14
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.4 Activate the Legal Regulation
Here you activate the legal regulations for each departure country or country group (export) and destination
country or country group (import). This enables you to specifically define the validity area of a legal
regulation.
Activate the Legal Regulation for a Country
SPRO → SAP Global Trade Services → General Settings → Legal Regulations → Activate Legal
Regulations at Country/Country Group Level
In this case, the departure country for export is US.
Activate the Legal Regulation for Export
Here you activate the legal regulations for each departure country or country group (export) and destination
country or country group (import) for each service that will be active in GTS.
SPRO → SAP Global Trade Services → Customs Management → “Customs Processing” Service →
Activate Legal Regulations
15
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.5 Configuring Messages for Post Processing Framework (PPF) Actions for Customs
Shipments/Declarations
The configuration of the Post Processing Framework (PPF) defines the technical medium that GTS uses to
communicate with the US Customs offices.
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Communication
Processes → Define Techn. Medium for Msgs (PPF Actions) from Cust.Shipm. and Cust.Decl.
16
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Action Definition
Process Type
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Communication
Processes → Define Conditions and output Parameters for Comm. of Cust. Ship. & Cust. Dcl
17
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.6 Check Electronic Messages
Double-check Electronic Message ID
These are electronic messages that GTS uses to communicate with the US customs authorities as the customs
declaration.
In transaction SM31, call the view “/SAPSLL/V_TLEEME” in maintenance view for the message scheme
“CUS_US”:
18
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD To display the details of electronic message ID, select the message ID and click “Details”. To change the
customizing of electronic message ID, highlight the message ID and click “Display → Change” to edit.
Make sure the electronic message ID (AES2) to the US customs authorities is configured as shown in the
screenshot below:
Check Message Definitions
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Communication
Processes → Define Messages for Communication Processes
Search for the message M0410 – Export Declaration Option 2 (US).
Find the message M0410 – Export Declaration Option 2 (US) and double click on it.
19
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Make sure all the values of the fields are maintained as shown below:
20
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Then, verify the messages I1560 - Commodity Shipment Filing Response (US) and I1570 - Commodity
Shipment Warning Response (US).
I1560:
I1570:
21
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD If you need to print the Shipper’s Export Declaration (SED), check out the message P0360 and verify all the
settings. Perform the same action to other printing documents needed.
22
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Verify the Function Module for Incompletion Checks
The incompletion schema should be configured to use the function module
“/SAPSLL/CHECK_US_CUS_AES2”. This can be checked with the menu path:
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Document
Structure → Control Incompleteness Checks in Customs Shipments and Customs Declarations
5.7 Customs Management Service Control
You specify the possible status, status sequence and time zone for the authorizations. You also assign process
template to a legal regulation.
SPRO → SAP Global Trade Services → SAP Customs Management → “Customs Processing” Service →
Control Settings for “Customs Processing” Service
23
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.8 Set Up the Process Flow for Customs Processing with AES
In order to declare export goods with the US government electronic customs system, Automated Export
System (AES), you must define a process flow that allows you to electronically communicate with the US
customs authorities. The process template is where electronic messages are attached for entering and sending
a Customs Export Declarations. If your export declaration is accepted, the customs authorities send you a
confirmation with a registration number (confirmation number).
Define Process Template
You assign the message schema “CUS_US” for electronic messages to this process template.
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Communication
Processes → Define Control Settings for Communication Processes
24
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Define Processes
Define communication process with customs authorities, for example “CUSEX” for US export.
Define Activities
You can logically group messages into activities for the chosen process. In the example below, one activity
(CUSEX) is set up for electronic messages and another one (CUSE2) for printed messages.
Assign Messages to Activities
You assign messages to activities. The screenshot below shows that messages for electronic communication
with AES are assigned to the activity “CUSEX”.
If you chose to have a single activity for the US export process, add the printed messages into this activity as
well. If you prefer having another activity for all the printed messages, assign those printed messages to that
separate activity.
25
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Define Activity Sequences
You define the activity execution order in the Subsequent Activities level. The example below shows that the
process of electronic messages (CUSEX) is followed by the printed messages (CUSE2). In another words,
the printed messages will not be executed until the process of electronic messages is completed.
The drawback of this kind of customizing is that you will not be able to process the printed messages until
the first activity is finished. If you do not like it, you have the option to configure a single activity with both
electronic and printed messages.
26
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Define Fall-back Activities Sequence
Here, you define the default activity sequence in case the AES system is down, or the communication
between GTS and AES is broken. The example shown here indicates that printed messages are the fall-back
process.
5.9 Define Rules for Message Output
Once the PPF is properly configured, it is necessary to tell GTS which messages are expected to appear under
the “Communication” tab of the export declaration. This is specified in default rules of output determination:
SAP GTS Area Menu → SAP Customs Management → Master Data → Default Data → Define Rules for
Output Determination
Select the procedure “COEUS” Messages – Export – U.S. and your legal regulation for US customs exports.
At a very minimum level, you should select the outbound AES message (M0410); plus all the printed
messages you expect to be processed:
27
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.10 Customs Code Lists
Define Customs Code List Procedure
The customs code lists are issued by customs offices. You need the customs codes for communications with
customs authorities, and in particular for the exchange of electronic messages. The customs codes are
officially valid values which enable customs authorities to precisely identify goods, means of transport and
other general attributes for import and export processes.
As a first step, a customs code list procedure is created so that custom codes can be assigned to it.
SPRO → SAP Global Trade Services → Customs Management → General Settings → Customs Code Lists
→ Define Procedures for Customs Code List
28
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Assign Customs Code List
In this step, you select which customs code lists are valid for your legal regulation.
SPRO → SAP Global Trade Services → SAP Customs Management → Customs Code List → Assign
Customs Code Lists Procedure to Legal Regulations
Maintain Customs Code Lists
Maintain values of customs code lists for legal regulations with the following menu path:
SPRO → SAP Global Trade Services → SAP Customs Management → Customs Code List → Maintain
Customs Code Lists for Legal Regulation
Below are the values of the customs code lists “Range of Goods”. Maintain all other lists as needed.
29
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
For the customs code list “Customs Status“, you also need to assign the status to a process and a legal
regulation with the menu path:
SPRO → SAP Global Trade Services → SAP Customs Management → Customs Code List → Assign
Customs Status to a Process and Legal Regulation
5.11 Partner Group
Partner functions are combined in a group for US Exports. The partner function group controls which types
of functions are displayed in the customs declaration.
SPRO → SAP Global Trade Services → General Settings → Partner Structure → Define Groups of Partner
Functions
Select partner group PGCEUS - Partner Group for Export "Customs Processing" - U.S. and then double click
on the folder “Assign Partner Functions”. Make sure you have all the partner functions included as per the
screenshot below:
30
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Please note that the latest mapping update from Seeburger supports the AES self-filer with employed
forwarding agent scenario in SAP GTS 7.2. To customize the scenario, you need to make sure:
a) The Carrier has the partner function (SP by default) with the partner function type CUSFRW assigned, as
the SCAC/IATA code in customs declaration is taken from the business partner master data of the Carrier.
b) The Forwarding Agent has the partner function (CUSSTP by default) with the partner function type
CUSSTP assigned.
c) The partner function SP and CUSSTP are in the partner function group PGCEUS.
Please refer to SAP Note 1492664 on detailed explaination.
As a summary, SAP GTS 7.2 supports the following AES filing scenarios:
1) AES self-filer without forwarding agent
2) AES self-filer with employed forwarding agent (new in GTS 7.2)
However, SAP GTS 7.2 does not support the following AES filing scenario:
3) Forwarding Agent filing on behalf of USPPI (U.S. Principle Party in Interest)
5.12 Document Type
Define Document Type
Define the document type for Export Customs Processing services in SAP GTS Customs Management.
SPRO → SAP GTS → SAP customs management → General setting → Document Structure → Define
Document Types
31
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Activate the Document Type
Activate the document type for Export Customs Processing services in SAP GTS Customs Management.
SPRO → SAP GTS → SAP customs management → General setting → Document Structure → Activate
Document Types
Assign the Document Type from Feeder Systems
Assign the document type for Export Customs Processing services in SAP GTS Customs Management to
document types from feeder system at Feeder System or Feeder System Group Level.
SPRO → SAP GTS → SAP customs management → General setting → Document Structure → Assignment
of Document Types from Feeder Systems
In the pop-up, select application level SD0C and enter the document type from the Feeder System or Feeder
System Group that triggers the creation of the export customs declaration in GTS:
32
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Define Item Category
Define the item category for Export Customs Processing services in SAP GTS Customs Management.
SPRO → SAP GTS → SAP customs management → General setting → Document Structure → Define Item
Categories
Assign Item Category
Assign the item category for Export Customs Processing services in SAP GTS Customs Management to an
item category from a Feeder System or Feeder System Group.
SPRO → SAP GTS → SAP customs management → General setting → Document Structure → Assignment
of Item Categories from Feeder Systems
33
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.13 Setup Communication Process
The following steps are used to customize how the outbound IDocs are sent out of GTS to the EDI adapter
and from there to the authorities, and vice versa for the inbound IDocs.
RFC Destination
First, create a RFC destination of Connection Type “TCP/IP” with the transaction SM59.
Port
In transaction WE21, create a port in the folder “Transactional RFC” with reference to the RFC destination
defined above:
34
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Partner Profile
In transaction WE20, create a partner profile under the “Partner Type GP” for each customs office you plan
to communicate with. The port for each customs office should have the outbound message type
“/SAPSLL/CUS_EXP” assigned:
35
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Also in transaction WE20, create a partner profile under the Partner Type GP for the IDoc adapter, such as
Seeburger. Only one partner profile is needed for the IDoc adapter. The port for the adapter must have the
inbound message type “/SAPSLL/CUS_INBOUND” assigned:
5.14 Print Control for Documents
The following steps are used to customize the print control that enables you to create and print the Shippers
Export Document. Other customs-relevant foreign trade documents can be customized in the same manner.
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Communication
Processes → Print Control for Foreign Trade Documents
36
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
5.15 Message and Printer Determinations
The messages will be assigned to a legal regulation as well as a document type which is essential for the
message determination in the customs document. Without this definition, the message does not appear in the
customs document.
Transaction code: /SAPSLL/PRNDT1 or the menu path:
SAP GTS Area Menu → SAP Customs Management → Customs Processing - Import/Export
37
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Message Parameters → Message Determination
38
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD GTS uses the legal unit and user ID to determine which output device to use for printed messages. If you
have specified this information, the printer name displays next to the printed message in the customs
declaration under the “Communication” tab.
Message Parameters → Printer Determination
39
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD 5.16 Defaulting Data
Based on the business rules, GTS allows you to default data when generating customs documents in customs
management. Defaulting data significantly speeds up the process of creating customs declaration documents.
SPRO → SAP Global Trade Services → SAP Customs Management → General Settings → Procedures for
Defaulting Data → Define Default Data for Document Fields, Messages, and Documents
Default Rules
40
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Once the rules are defined in the customizing, business user can set the declaration default values from the
GTS Area Menu based on the procedure and legal regulation.
Below is an example of how to default the office of departure based on the Foreign Trade Organization and
the Legal Unit
SAP GTS Area Menu → SAP Customs Management → Master Data → Default Data → Define Rules for
Default Document Data
41
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD 5.17 Sample IDoc of Customs Declaration
Here is a sample outbound EDI message (X12 601) to the AES:
Note:
The transmitter ID (EIN) and password have been blacked out in the sample files for security reason.
42
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD Here is a sample inbound EDI (X12 824) message with acceptance status from AES.
Here is a sample inbound EDI (X12 824) message with rejection status from AES.
43
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
6. Comments and Feedbacks
Your feedback is very valuable and will enable us to improve our documents. Please take a few moments to
complete our feedback form. Any information you submit will be kept confidential.
You can access the feedback form at: http://www.surveymonkey.com/s.aspx?sm=stdoYUlaABrbKUBpE95Y9g_3d_3d
44
©SAP Labs LLC. 2010
SAP GRC GLOBAL TRADE SERVICES 7.2
PREFERRED PRACTICE
US - AES
SANCTIONED PARTY LIST OFFLINE SCREENING
UPLOAD
Copyright SAP Labs, LLC. 2010 All Rights Reserved
No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP
AG. The information contained herein may be changed without prior notice.
Some software products marketed by SAP AG and its distributors contain proprietary software components of other software
vendors.
SAP, R/3, mySAP, mySAP.com, xApps, xApp, SAP NetWeaver, Duet, Business ByDesign, ByDesign, PartnerEdge and other SAP
products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in
Germany and in several other countries all over the world. All other product and service names mentioned and associated logos
displayed are the trademarks of their respective companies. Data contained in this document serves informational purposes only.
National product specifications may vary.
The information in this document is proprietary to SAP. This document is a preliminary version and not subject to your license
agreement or any other agreement with SAP. This document contains only intended strategies, developments, and functionalities of
the SAP® product and is not intended to be binding upon SAP to any particular course of business, product strategy, and/or
development. SAP assumes no responsibility for errors or omissions in this document. SAP does not warrant the accuracy or
completeness of the information, text, graphics, links, or other items contained within this material. This document is provided
without a warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness
for a particular purpose, or non-infringement.
SAP shall have no liability for damages of any kind including without limitation direct, special, indirect, or consequential damages
that may result from the use of these materials. This limitation shall not apply in cases of intent or gross negligence.
The statutory liability for personal injury and defective products is not affected. SAP has no control over the information that you may
access through the use of hot links contained in these materials and does not endorse your use of third-party Web pages nor
provide any warranty whatsoever relating to third-party Web pages