85LS Series

Small Form Factor SATA Solid State Drive - 14 x 24 x 1.95mm 145-ball BGA packageIndustry Standard Serial ATA Interface - SATA 1.5 Gbit/sec or SATA 3.0 Gbit/sec - ATA/ATAPI-8 compliant - Supports 48-bit address feature setEnergy Efficient - 3.3V and 1.2V low power supply - Active Mode as low as 360mW (typical) - Sleep Mode, 70mW (typical)Multitasking Technology IncreasesPerformance - Sustained Read Performance up to 120 MB/sec - Sustained Write Performance up to 80 MB/sec

Robust Pre-programmed Firmware - Global advanced wear leveling maximizes product lifespan - Configurable algorithms optimize wear leveling and data retention - Embedded flash file system for seamless capacity upgrade with no change to host softwarePower Interrupt Data Protection - Prevents data corruption when power is lost or unstableBad Block Management - Replaces bad blocks with spare blocks in the NAND flash to prevent uncorrectable errorsBuilt-in ECC - Uses advanced hardware engine to correct bit errors

Advanced Data Security - Added data security through user-selectable protection zones and security erase/purge commandsSSD Lifespan Monitoring - Enables SMART command-based alerts indicating the remaining useful product life - Estimates optimal SSD capacity based upon specific application usage modelsMultiple Capacities with Same Pin-out - 2 GB, 4 GB, 8 GB, 16 GB, 32 GB, 64 GB - 1mm ball spacing enables use of lower cost PCBsCommercial and Industrial Temperatures - Commercial operation: 0°C to +70°C - Industrial operation: -40°C to +85°C

SATA NANDrive™

A p p l i c a t i o n s

— Tablet PC / Smartbook / Netbook— Set-top box / Net-top box— Internet-enabled TV— Industrial PC— Single-board computer— Industrial automation & control— Test & measurement instrumentation— Blade server— Gateway / Switch— Network firewall— Video surveillance— Black box data recorder— Video conferencing— GPS and telematics— In-vehicle infotainment— Multi-function printer

Product Description

The SATA NANDrive™ family of embedded solid state drives (SSDs) integrate Greenliant’s advanced Serial ATA controller with one or more NAND flash die in a small ball grid array (BGA) package. SATA NANDrive products have the same footprint across all capacities for backward compatibility, simplifying system-level board design. Its built-in microcontroller and flash file management firmware replace the need for host-side Flash File System (FFS) and Memory Technology Driver (MTD) software.

SATA NANDrive combines Serial ATA hard disk drive (HDD) functionality with the superior performance, data integrity and reliability of solid state memory. It is available with 2-bits-per-cell (MLC) or 1-bit-per-cell (SLC) NAND to meet various endurance (program-erase cycles) and data retention requirements. Compatible with many popular chipsets, SATA NANDrive SSDs are ideal for compact embedded systems that require secure, long-life and energy-efficient data storage.

Greenliant Systems3970 Freedom Circle, Suite 100Santa Clara, CA 95054 USATel: 1-408-200-8000 Fax: 1-408-200-8099www.Greenliant.com

Product Brief

Key Features

www.NANDrive.com

SATA NANDrive Block Diagram

SATA NANDrive Package Diagrams

Greenliant Systems3970 Freedom Circle, Suite 100Santa Clara, CA 95054 USATel: 1-408-200-8000 Fax: 1-408-200-8099www.Greenliant.com

For more information please contact your local Greenliant sales representative.See the “Sales” section of www.Greenliant.com for complete listings.© 2013 Greenliant. Greenliant and the Greenliant logo are registered trademarks, and NANDrive is a trademark of Greenliant Systems.These specifications are subject to change without notice. 10/2013

SATAHost

Interface NANDFlash

EmbeddedFlash FileSystem

SRAM Buffer

MCU

InternalDMA

PMU SCI ECC

Mem

oryC

hannel I/FM

emory

Channel I/F

ECC

Product Lineup

145-ball BGA packageFZJ is 14mm x 24mm x 1.95mm

Pb-free (RoHS compliant)

85 Series SATA NANDriveCapacity NAND Configuration Temperature Range

2 GB2 bits per cell (MLC)

Commercial

Industrial

1 bit per cell (SLC) Industrial

4 GB2 bits per cell (MLC)

Commercial

Industrial

1 bit per cell (SLC) Industrial

8 GB2 bits per cell (MLC)

Commercial

Industrial

1 bit per cell (SLC) Industrial

16 GB2 bits per cell (MLC)

Commercial

Industrial

1 bit per cell (SLC) Industrial

32 GB2 bits per cell (MLC)

Commercial

Industrial

1 bit per cell (SLC) Industrial

64 GB 2 bits per cell (MLC)Commercial

Industrial

Note: 1. All linear dimensions are in millimeters. 2. Untoleranced dimensions are nominal target values. 3. Coplanarity: 0.15 mm. 4. Ball opening size is 0.40 mm (± 0.05 mm).

BOTTOM VIEW

DETAIL VIEW SIDE VIEW

SEATING PLANE

TOP VIEW

1

2

3

4

5

6

7

8

9

10

11

A B C D E F G H J K L M N P R T U V W Y AA AB ACA B C D E F G H J K L M N P R T U V W Y AA AB AC

11

10

9

8

7

6

5

4

3

2

1

0.40 ±0.05

A1 CORNER

0.15

1.80 ±0.15

1.0

1.0

0.50 ±0.05 (145x)

8.0

14.0

24.0 ±0.1

14.0±0.1

A1 CORNER