scala2 - kingspan | australiadandenong south, vic, 3175 f: 03 9706 9533 clayton engineering p: 1300...
TRANSCRIPT
SCALA2
GRUNDFOS SCALA2 is a robust, composite, variable speed pump that adjusts performance according to water demand, providing constant pressure to all taps. The fully integrated pump includes a motor, tank, sensor, drive and non-return valve in one compact unit that is quick and easy to install. The SCALA2 is self-priming, allowing for use from both above and below ground water sources and the water-cooled motor ensures quiet operation.
Applications• Mainsboosting
• Householdwatersupply
• Pressureboostingfromabovegroundwatertanks
• Pressureboostingfrombelowgroundwatersourceseg.Belowgroundtank/dam
FeaturesVariable SpeedThe pump adjusts performance according to water demand, providing constant pressure to all taps regardless of variations in demand or inlet pressure.
Self-PrimingIdeal for pressurising water from above or below ground water sources with a suction lift of up to 8 metres and self-priming up to 4 metres.
Energy EfficientThe pump features a permanent magnet motor to help reduce power consumption while the frequency controller matches the power consumption with the required water output, also helping to conserve energy and reduce energy bills.
Simple SelectionOne model to suit most domestic applications makes selection easy.
User FriendlyThe easy to use control panel features LED indictors displaying power status, pressure setting and alarm indicator lights.
Protective FunctionsTo protect the pump and help ensure a long life, a range of protective features are incorporated into the pump such as; dry-run protection, anti-cycling alarm, auto-reset and maximum continuous operation time (30 mins).
Easy InstallationQuick and easy installation in just three steps; connect the pipes, prime the pump and plug into the power outlet.
Integrated Non-Return ValveNo additional non-return valve required - plug and pump solution.
Model Power Input (kW)
Dimensions (mm) Weight (kg)H1 H2 H3 L W A1 A2
SCALA2 0.55 302 234 114 403 193 1”F 1”F 10
SCALA2
OperatingConditionsSystempressure
Max. 10 bar
LiquidTemperature0°C to + 45°C
AmbientTemperatureMax. 55°C
RelativeAirHumidityMax. 95%
TechnicalDataMainsvoltage1 x 240 V, 50 Hz
EnclosureclassF
InsulationclassX4D (suitable for outdoor installation)
Soundpressurelevel<47 dBa
ApprovalsandmarkingsASNZ4020, CE
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [l/s]
0.0 6 12 18 24 30 36 42 48 54 60 Q [l/min]
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 Q [m3/h]
H[m]
20
15
10
5
0
45
40
35
30
25
Dimensions
A1
A2
The
nam
e G
rund
fos,
the
Gru
ndfo
s log
o, a
nd b
e th
ink
inno
vate
are
regi
ster
ed tr
adem
arks
ow
ned
by G
rund
fos H
oldi
ng A
/S o
r Gru
ndfo
s A/S
, Den
mar
k. A
ll rig
hts r
eser
ved
wor
ldw
ide.
How tHe SQ(e) protectS and reduceS wear
VolTAGE hAndlInG
Increased winding temperature caused by under voltage often reduces the lifespan of the pump. The SQ(E) motor is protected against voltage fluctuations including over and under voltage.
dry runnInG ProTEcTIon
The SQ(E) pump is factory pre-set based on minimum power consumption. Dry-running protection is activated 40 seconds after power is connected to allow priming of the pump. When there is no water in the hydraulics, power consumption is reduced. The SQ(E) stops automatically when below the dry run power limit and restarts automatically within 5 minutes after cut-out.
SQe and cu301conSTAnT PrESSurE oPErATIon
When using a CU301 controller with the SQE pump, water pressure will always remain constant regardless of how much water is being consumed. As more taps are opened, the pump automatically increases its speed, maintaining the chosen pressure at any flow rate.
PowEr lInE communIcATIon
The SQE communicates with the CU301 without the need for additional cables. If there is a failure at the pump, via the power cable, simple diagnostics can take place.
SImPlE ProGrAmmInG
The CU301 has a simple interface with up/down buttons to control the pressure of the pump. Hold both the up and down buttons for 5 seconds and the unit is locked - easy.
SofT STArT
Soft start ensures a low starting current with a smooth and steady acceleration. This offers excellent starting reliability at low voltage, prevents overload of the mains power, reduces water hammer in the pipe and reduces pump wear.
for morE InformATIon conTAcT:
PowEr SuPPly
Low ampere usage makes it possible to connect more appliances to the same fuse group or reduce the size of the power line. Small generators can be used with SQ(E).
Grundfos recommends to use a generator with a capacity 50% higher than rated pump power consumption.
The SQ(E) pump provides several features that simplify your installation and add reliability to the system.
150 180 200
207 V 244 V
Conventional AC Motor
SQ SQ
220 240 260 280 315
Supply voltage [V]
Current
Time
Soft start
Direct online (DOL)
2 sec.protective Feature SQ(e) conventional
ac motor SQe + cu301
Over voltage / under voltage protection ✔ ✖ ✔
Integrated dry running protection ✔ ✖ ✔
Over temperature protection ✔ ✖ ✔
Overload protection ✔ ✖ ✔
Start function with high torque and without starter box ✔ ✖ ✔
Visual fault indication alarm ✖ ✖ ✔
Variable speed control ✖ ✖ ✔
H
Q
Q
PP1P cut-out
H
Q
Q
PP1P cut-out
pertH 63 McDonald Crescent Bassendean, WA, 6054 F: 08 9279 7005
MeLBourne 24 Healey Road Dandenong South, VIC, 3175 F: 03 9706 9533
CLAYTON ENGINEERING P: 1300 798 022 E: [email protected]
BrISBane 26 French Ave Brendale, QLD, 4500 F: 07 3881 2780
The
nam
e G
rund
fos,
the
Gru
ndfo
s log
o, a
nd b
e th
ink
inno
vate
are
regi
ster
ed tr
adem
arks
ow
ned
by G
rund
fos H
oldi
ng A
/S o
r Gru
ndfo
s A/S
, Den
mar
k. A
ll rig
hts r
eser
ved
wor
ldw
ide.
How tHe SQ(e) protectS and reduceS wear
VolTAGE hAndlInG
Increased winding temperature caused by under voltage often reduces the lifespan of the pump. The SQ(E) motor is protected against voltage fluctuations including over and under voltage.
dry runnInG ProTEcTIon
The SQ(E) pump is factory pre-set based on minimum power consumption. Dry-running protection is activated 40 seconds after power is connected to allow priming of the pump. When there is no water in the hydraulics, power consumption is reduced. The SQ(E) stops automatically when below the dry run power limit and restarts automatically within 5 minutes after cut-out.
SQe and cu301conSTAnT PrESSurE oPErATIon
When using a CU301 controller with the SQE pump, water pressure will always remain constant regardless of how much water is being consumed. As more taps are opened, the pump automatically increases its speed, maintaining the chosen pressure at any flow rate.
PowEr lInE communIcATIon
The SQE communicates with the CU301 without the need for additional cables. If there is a failure at the pump, via the power cable, simple diagnostics can take place.
SImPlE ProGrAmmInG
The CU301 has a simple interface with up/down buttons to control the pressure of the pump. Hold both the up and down buttons for 5 seconds and the unit is locked - easy.
SofT STArT
Soft start ensures a low starting current with a smooth and steady acceleration. This offers excellent starting reliability at low voltage, prevents overload of the mains power, reduces water hammer in the pipe and reduces pump wear.
for morE InformATIon conTAcT:
PowEr SuPPly
Low ampere usage makes it possible to connect more appliances to the same fuse group or reduce the size of the power line. Small generators can be used with SQ(E).
Grundfos recommends to use a generator with a capacity 50% higher than rated pump power consumption.
The SQ(E) pump provides several features that simplify your installation and add reliability to the system.
150 180 200
207 V 244 V
Conventional AC Motor
SQ SQ
220 240 260 280 315
Supply voltage [V]
Current
Time
Soft start
Direct online (DOL)
2 sec.protective Feature SQ(e) conventional
ac motor SQe + cu301
Over voltage / under voltage protection ✔ ✖ ✔
Integrated dry running protection ✔ ✖ ✔
Over temperature protection ✔ ✖ ✔
Overload protection ✔ ✖ ✔
Start function with high torque and without starter box ✔ ✖ ✔
Visual fault indication alarm ✖ ✖ ✔
Variable speed control ✖ ✖ ✔
H
Q
Q
PP1P cut-out
H
Q
Q
PP1P cut-out
pertH 63 McDonald Crescent Bassendean, WA, 6054 F: 08 9279 7005
MeLBourne 24 Healey Road Dandenong South, VIC, 3175 F: 03 9706 9533
CLAYTON ENGINEERING P: 1300 798 022 E: [email protected]
BrISBane 26 French Ave Brendale, QLD, 4500 F: 07 3881 2780 KingspanEnvironmentalPtyLtd
HEAD OFFICE8 Bessemer Street, Blacktown NSW 2148
P: 1300 736 562 F: 1300 736 582
ABN 62 108 491 881
NEW SOUTH WALESVICTORIAQUEENSLAND
Performance