scan here for our becker hard turning with cbn video · becker sandwich cbn grades & cutting...
TRANSCRIPT
Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted.
Available From:
Scan here forour BECKER
Hard Turning with CBN video
BECKER Sandwich CBN Grades & Cutting ParametersBECKER ISO Composition - Performance Application
PBC-15S BH-C Coated PcBN grade with high content of CBN (90%) in sandwich performance. Fine grain, high wear resistance and toughness at lower cutting speed than with PBC-10S.
Nodular cast iron • Grey cast ironSintered powdered alloys • Super alloys
PBC-40S BL-C Coated PcBN grade with low content of CBN (55%) in sandwich performance. Super fine grain, very high wear resistance, compressive strength and toughness for hard turning with continuous to extremely interrupted cut.
Hard turning, dry + wet • HRc = 48 - 65 ap = 0.002" - 0.020" • Ra = 4 - 125 RMS
High PerformanceSandwich CBN Designation
Dimensions # ofCorners PBC-15S PBC-40S SPECIAL
PRICEd s l l¹ r
CCGW-21.51-E-2MC .250 .094 .254 .110 .016
2n n
$46.95CCGW-32.51-E-2MC .375 .156 .382 .110 .016 n n
CNGA-431-E-4SC.500 .187 .508
.110 .016
4n n
$69.95CNGA-432-E-4SC .098 .031 n n
DCGW-21.51-E-2MC .250 .094 .305 .118 .016
2n n
$46.95DCGW-32.51-E-2MC .375 .156 .457 .118 .016 n n
DNGA-431-E-4SC.500 .187 .610
.110 .016
4n n
$69.95DNGA-432-E-4SC .098 .031 n n
SNGA-431-E-8SC.500 .187 .500
.110 .031
8n n
$109.95SNGA-432-E-8SC .102 .047 n n
TCGW-21.51-E-3MC.250 .094 .433
.098 .016
3n n
$62.95TCGW-21.52-E-3MC .083 .031 n n
TCGW-32.51-E-3MC.375 .156 .650
.126 .016 n n
TCGW-32.52-E-3MC .106 .031 n n
TNGA-331-E-6SC.375 .187 .650
.110 .016
6n n
$89.95TNGA-332-E-6SC .098 .031 n n
VCGW-221-E-2MC .250 .125 .437 .122 .016
2n n
$46.95VCGW-331-E-2MC .375 .187 .654 .122 .016 n n
VNGA-331-E-4SC.375 .187 .654
.110 .016
4n n
$69.95VNGA-332-E-4SC .087 .031 n n
Other edge prep’s also available - please visit our website