www.gason.com.au

S c a r i T I L L ™ a n d H y d r a T I L L ®

In February 1946 my father, Frank Gason, founded a motor trimming business at Ararat in western Victoria.

During the following year he was asked to build a cabin for a Minneapolis Moline GTA (Twin City) tractor. He did so with his usual thoroughness and commitment to quality, creating a standard for Gason agricultural equipment that continues to this day.

It was the first of many tens of thousands of cabins produced over the following 40 years that carried the Gason name on to farms in every corner of Australia. Many older farmers still fondly remember their first experience of weather protection provided by a Gason cabin.

Government contracts started to flow in and a production line was developed. We decided to build operator cabins for not just tractors and self-propelled headers, but for all agricultural, industrial and earthmoving equipment.

My father’s philosophy was to build the very best and it paid off. By the mid-1970’s our tractor, header and industrial e q u i p m e n t cabins became

the standard and were fitted as original equipment in tractor company plants across Australia. Contracts were signed with Caterpillar and John Deere, amongst others, and we captured 90% of all government contracts for a vast variety of industrial cabins.

Gason helped pioneer an Australian Standard for roll-over protective structures (ROPS) for tractors and established a NATA approved test facility at the factory. Our ROPS were the first approved by the Standards Association of Australia.

As manufacturers started bringing in tractors with cabins already fitted, we moved towards d e v e l o p i n g cultivation and

air seeder machines as a means of diversification. Engineers were engaged to design products suited to our unique Australian conditions.

The result was a range of tillage planters and seeding equipment that continued our commitment to providing farmers with tough, long-lasting machinery. Research and development has been an ongoing obsession for us here at Gason. Improvements are constantly in the pipeline. Our products are highly regarded for their accuracy and efficiency. In 2004 the independent Kondinin Group found that our Australian designed and built air seeder ranked as a world leader for accuracy of seed and fertiliser distribution.

We maintain our status as an ISO9001 licensed manufac ture r. Our facilities are constantly being improved with the ongoing

installation of modern manufacturing equipment in our 18,000 square metre, fully enclosed factory.

We maintain a strong national dealer network to ensure our farmers are well supported. We also maintain close contact with farmers in every state so that we understand their developing requirements.

The third generation of Gason’s are now working in the business as part of a strong management team. Sixty years on we remain true to Frank’s guiding principles – principles that made the company synonymous with excellence in tractor cabins, and principles that now make the Gason name synonymous with excellence in broad acre farm machinery.

THE GASON STORY

As manufacturers started bringing in tractors with cabins already fitted, we moved towards d e v e l o p i n g cultivation and

Les GasonManaging Director

My father’s philosophy was to build the very best and it paid off. By the mid-1970’s our tractor, header and industrial e q u i p m e n t cabins became

All steel and assemblies are kept under cover.

2 3

Gason equipment is designed by engineers with practical experience who understand Australian conditions. Thorough testing on farms right across Australia ensures that every Gason machine will deliver top performance in every application.

Precision manufactureHigh-capacity, highly accurate laser cutting machines capable of producing parts accurate to one tenth of a millimetre are at the heart of Gason’s manufacturing process. With computer numerical control (CNC) folders and purpose-built tooling, the Gason facility has the stringent controls necessary for high quality and repeatability of components.Our highly durable tillage and seeding equipment is capable of precise performance, time after time.

A better finishAll steel, sub-assemblies and coated fabricated parts are stored under cover. This ensures all coated parts are dispatched in an “as new” condition.The key to a good looking and durable finish is in the preparation. Frames and components are either buffed or put through our shot blasting facility as part of the coating preparation.The shot blasting process removes surface imperfections and grease, leaving a fine-textured surface for improved coating adhesion. As an added bonus, shot blasting removes surface stresses, improving the fatigue life of the component.Buffed parts are degreased through a three stage iron phosphate wash system. Components are then put through one of our electrostatic coating systems - either powder or two-coat high bake enamel.

ENGINEERED FOR AUSTRALIAN CONDITIONS

Paint depths are electronically checked. Laser cut parts are accurate to 0.1mm. All steel and assemblies are kept under cover.

2 3

SPECIFY A MACHINE TO SUIT YOUR FARMING CONDITIONS

HydraTILL®

• conventional working with sweeps

• minimum till or no till with knife points

• controlled traffic, 2, 3 or 4 m

• hydraulic breakout with soft recoil

• precision agriculture with optional parallelograms, constant seed depth with banding if required

• accommodates mounted press wheels and/or coulters

ScariTILL™

• conventional working with sweeps

• minimum till or no till with knife points

• controlled traffic, 2, 3 or 4 m

• accommodates mounted press wheels and/or coulters

Versatility is the major benefit when choosing from the Gason tillage planter range.

The Gason range of tined implements offers farmers the opportunity to specify a machine best suited to their overall requirements. The full list of configurations and options is shown on pages 16 to 19. Choose the overall width to suit your tractor and conditions, select from a variety of row spacings and nominate tyre sizes. Many machines offer a choice of floating hitch or rigid pull.

Other choices are also available. Both shanks and ground tools are easily changed in the field, providing further versatility and allowing you to switch between conventional till and zero/minimum till.

Choose between spring tines with 400 or 540 lbs breakout force, or hydraulic tines with up to 680 lbs breakout force.

ScariTILL refers to spring tine machines and HydraTILL denotes hydraulic tines.

4 5

ScariTILL™ offers standard spring release tines with two optional breakout forces and HydraTILL®’s hydraulic release mechanism provides variable adjustment and a soft return mechanism.

Tine assembly towers are mounted above the toolbar for maximum trash clearance. Choose from two types of shanks, both with vertical adjustment.

Spearpoint shanks are available with male or female adapters. Double bolt shanks are available with either 47º or 50º forged feet.

Vertical adjustment allows tines to be placed lower behind the tractor wheels to maintain a constant sowing depth.

Vertical adjustment is perfect for raised beds. Tine depth can be varied across the frame to follow the contour of the beds.

TOTAL TINE TECHNOLOGY

4 5Vertical height adjustment in 12 mm increments.Vertical height adjustment in 12 mm increments.V

ScariTILL™ HydraTILL®

Slotted top bolt hole allows for the fitting of a wide range of ground tools with bolt spacings from 1 3/4” to 2 1/4”.

Double bolt 50° forged foot shank foot shank footfor sweeps.

Double bolt 47° forged foot shank for sweeps.

Spearpoint with male adapter.

Spearpoint shank with female adapter.

Both ScariTILL™ and HydraTILL® tillage planters are available in cutting widths from 6.0 m to 18.5 m.

Transport widths vary from 4.8 m to a maximum of 8.65 m.

6 7

Spring tines are fitted with polyurethane shock pads to absorb recoil loads, reducing metal fatigue.

• large dimension hardened steel bushes and pivot pins with Molycoating for corrosion and seizure protection

• two piece stepped outer primary pivot bushes provide a grease reservoir

• inner bush has a spiral groove to transfer grease along the entire length of the bearing surface

6 7

HydraTILL® hydraulic release• two accumulator pre-charge pressures

100 – 300 lbs and 300 – 680 lbs

• variable adjustment within the ranges

• maximum jump of 350 mm (spearpoint shanks at 760 mm underframe clearance)

• remote mounted pressure gauge

• double chrome plating on cylinder rods with double seals and back up wiper for improved corrosion protection

• solid ram shaft eliminates flexing and reduces seal wear

ScariTILL™ spring release • available with either 400 lbs or 540 lbs

breakout force

• maximum jump of 350 mm (spearpoint shanks at 760 mm underframe clearance)

Holes in pivot assembly and tines allow vertical adjustment in 12 mm increments and easy changeover of shanks.

Trash clearance is exceptional with straight edge on tines, a clean underframe and minimum 800 mm between rows.

Depth control breakout geometryGason tine release geometry maintains a more constant sowing depth because of the relationship between the pivot point and ground tool. Tines tend to move horizontally rearwards before rising.

Exceptional trash clearanceGason tillage planter bars provide exceptional trash clearance with the cleanest underframe design in the business.

• up to 760 mm maximum underframe clearance

• no tine towers below the frame

• no springs below the frame

• five row frame with minimum 800 mm between rows

• total depth of frame 3.8 metres

Double shooting setup with height adjustable seed boot behind. Tine mounted boot places fertiliser at depth with seed above.

8 9

PRECISION AGRICULTURE WITH PARALLELOGRAMS

PRESS WHEELS

8 9

Precision agriculture is the name of the game with parallelograms (available only on HydraTILL®). Gason parallelograms maintain precise seed depth, and also allow for side banding, and double or triple shooting.

When double shooting, fertiliser is placed using the sowing boot on the front tine while the rear boot places seed at the correct depth. Rear tine depth is controlled by the press wheel.

Blending is also possible. Main fertiliser application is through the front sowing boot, but a starter dose of fertiliser is mixed with the seed through the rear boot.

• precise seed depth with the press wheel controlling rear tine height

• rear tine can be offset by up to 25 mm for banding

Parallelogram can be removed completely if not required and replaced with spearpoint or double bolt shank.

Users of press wheels report better utilisation of soil Users of press wheels report better utilisation of soil moisture and quicker germination, especially in drier conditions.

Available in either tine or frame mounted.

• mounts left or right of tine (frame mounted wheels)

• greasable, hardened bushes in all pivot points

• variable height settings for large range of underframe clearances

• variable wheel pressure via adjustable spring

• wide range of wheels available

• can be stored in a pin-up position if not in use - no tools required

• uses standard Holden hub with seal guard

• arm pivot allows self-alignment when turning

Tine mounted press wheels are good, lower cost Tine mounted press wheels are good, lower cost solutions in light soil conditions where there is little or no tine breakout movement.

Frame mounted press wheels are a better option in tougher conditions because they maintain their position independently of the tines. Sowing boots can be mounted on the press wheels for better seed depth control. Frame mounted press wheels are very popular in conjunction with coulters.

ScrapersOptional scrapers with tungsten tiles are available to stop soil buildup in sticky conditions.

Optional seOptional seeding boot attached to press wheel proveding boot attached to press wheel provideseding boot attached to press wheel provideseding boot attached to press wheel provbetter seed depth control. Mud scraper optional.ed depth control. Mud scraper optional.ed de

Mud scraper optional.

Both ScariTILL™ and HydraTILL® come with the choice of either rigid pull or a floating hitch. Each has its advantages depending on your conditions.

All hitches are fitted with mechanical parking jacks, safety tow chains and replaceable hitch pin bush.

Floating hitch

Floating hitch is the ideal choice for uneven ground. It is hinged at the frame attach points. The entire weight of the machine is carried on two rows of wheels (in frame and out front) allowing it to closely follow contours regardless of the tractor’s position.

Frame attach pivots use replaceable bushes.

Rigid pull

Rigid Pull is often a better choice where paddocks are fairly flat because considerable weight is transferred to the drawbar improving traction. Horsepower requirements are usually lower. The hitch tongue is adjustable to cater for different drawbar heights and working depths.

Hydraulic hitch height adjustment available on rigid pull models

RIGID PULL OR FLOATING HITCH

Controlled traffic farming reduces soil compaction. It reduces draft and can reduce tractor fuel consumption.

Both ScariTILL™ and HydraTILL® are available in controlled traffic versions with wheel spacings of 2 m, 3 m and 4 m.

CONTROLLED TRAFFIC

10 11

Large singlesStandard on all controlled traffic models or by request on some models.

Walking wheels are excellent at following contours and maintaining an even seed depth. They are especially suited to rocky conditions. Walking beam wheels can assist with depth variation.

WHEELS

10 11

COULTERSMany farmers find coulters are a very useful addition to help cut through trash and prevent soil explosion in front of the tines.

• four mounting options

- direct to frame using U bolts

- left or right of the tine tower

- directly to the tine tower replacing the cast clamp

- offset stub mount

• adjustable pressure spring up to 200 lbs breakout

• full castoring with increased spring force to hold straight

• if not in use can be stored in pin-up position

• three greasable points

• 18" coulter discs in plain, wavy and fluted styles

Offset stub mount(using u bolts).

Mount armLeft or right of tine.12 13

HARROWSGason’s philosophy for continual improvement has not neglected the traditional Finger Tined Harrows.

The Gason Harrow range has expanded to include both three and four row sections. The three row sections have been spaced further apart to accommodate greater amounts of stubble. An optional quick release mounting system is also available.

PRECISE, LONG-LASTING HYDRAULICSGason fits only the best quality hydraulic components for precise control and reduced maintenance.

• PTE depth control phasing cylinders, heavy rod typewith mechanical depth stops fitted to master cylinders

• relief valve fitted to a depth control circuits to protect

cylinders from excessive loads (circuit pressure limited to 1500psi)

• 60 micron in-line filters fitted to all circuits

• double braid non-skive hoses (1/2” bore on depth control circuit)

• dual pilot check valves on depth control circuit isolates tractor hydraulics and prevents creeping

• in-line restrictors in both wing fold and depth control circuits for safety

• hydraulically fold wings from the tractor – no locking pins to remove

Heavy duty hardened and Molycoated pins and bushes minimise wear and maintain wing hinge alignment. (Excludes SWFH and HWFH double fold range)

Grease nipples are fitted in pin ends for easy accessibility. Grooves machined into the pins also help grease distribution.

HARDENED HINGES

12 13

Controlled traffic (medium) row crop 3 m

Controlled traffic (medium)row crop 4 m

EASY FOLDINGWings can be folded up from the tractor seat. No pins to remove.

14 15

Controlled traffic row crop 2 m

FRAME COMBINATIONS TO SUIT MOST APPLICATIONS. Frame layouts are based on narrow, medium and wide centre sections with various wing options in single and double fold. Controlled traffic versions are available in 2 m, 3 m and 4 m.

Narrow

Wide - Single Fold

Wide - Double Fold

14 15

ScariTILL™ and HydraTILL® - Narrow broadacre applications

Model

TransportWing Width

Width of cut

Sin

gle

Wh

eel

Wal

kin

gW

hee

ls

Rig

id P

ull

Flo

atin

g H

itch

Hyd

rau

lic H

itch

Lev

elle

r

Do

ub

le F

old

Stab

ilise

r W

hee

ls

Spea

rpo

int

Shan

ks

Tin

e B

reak

-ou

t O

pti

on

(5

40lb

f &

spr

ing

tines

onl

y)

Para

llelo

gra

ms

1)

(hyd

raul

ic t

ines

onl

y)

Fram

e M

ou

nte

d

Pres

swh

eels

1)

Co

ult

ers

1)

Width Height

m ft m ft m ft m ft

S/HN31-250 5.72 18.8 3.65 12 2.4 7.9 7.5 24.6 - s s o o - o o o o o o

S/HN39-200 5.72 18.8 3.65 12 2.4 7.9 7.6 24.9 - s s o o - o o o - - o

S/HN33-250 5.72 18.8 3.74 12.2 2.4 7.9 8.0 26.2 - s s o o - o o o o o o

S/HN41-200 5.72 18.8 3.74 12.2 2.4 7.9 8.0 26.2 - s s o o - o o o - - o

S/HN43-200 5.72 18.8 3.93 12.9 2.4 7.9 8.4 27.6 - s s o o - o o o - - o

S/HN35-250 5.72 18.8 3.98 13.1 2.4 7.9 8.5 27.9 - s s o o - o o o o o o

S/HN45-200 5.72 18.8 4.13 13.5 2.4 7.9 8.8 28.9 - s s o o - o o o - - o

S/HN39-250 5.72 18.8 3.65 12 2.4 7.9 9.5 31.2 - s s o o - o o o o o o

S/HN39-250 5.72 18.8 4.62 15.2 3.4 11.2 9.5 31.2 - s s o o - o o o o o o

S/HN41-250 5.72 18.8 4.71 15.5 3.4 11.2 10.0 32.8 - s s o o - o o o o o o

S/HN51-200 5.72 18.8 4.62 15.2 3.4 11.2 10.0 32.8 - s s o o - o o o - - o

S/HN53-200 5.72 18.8 4.91 16.1 3.4 11.2 10.4 34.1 - s s o o - o o o - - o

S/HN43-250 5.72 18.8 4.96 16.3 3.4 11.2 10.5 34.4 - s s o o - o o o o o o

S/HN55-200 5.72 18.8 5.1 16.7 3.4 11.2 10.8 35.4 - s s o o - o o o - - o

S/HN49-250 5.72 18.8 5.69 18.7 4.4 14.4 12.0 39.4 - s s o o - s o - o - o

S/HN61-200 5.72 18.8 5.69 18.7 4.4 14.4 12.0 39.4 - s s o o - s o - - - o

S/HN31-250 denotes ScariTILL™ or HydraTILL®, narrow centre frame with 31 tines at 250 mm spacing.

ScariTILL™ and HydraTILL® - Medium broadacre applications

S/HM33-333 6.6 21.7 4.6 15.1 3.4 11.2 10.7 35.0 - s s o o - o o - o o o

S/HM47-250 6.7 22 4.9 16.1 3.4 11.2 11.5 37.7 - s s o o - o o - o o o

S/HM51-250 6.62 21.7 5.44 17.8 4.1 13.5 12.5 41.0 - s s o o - s o o o o o

S/HM39-333 6.65 21.8 5.52 18.1 4.1 13.5 12.7 41.6 - s s o o - s o - o o o

S/HM47-333 7.5 24.6 5.8 19 DF DF 15.3 50.3 - s s o o s s o - o o o

S/HM63-250 7.5 24.6 5.8 19 DF DF 15.5 50.9 - s s o o s s o - o o o

S/HM33-333 denotes ScariTILL™ or HydraTILL®, narrow centre frame with 33 tines at 333 mm spacing.

14

LEGEND- - Not Availableo Optional Equipments Standard Equipment 16 17

LEGEND

o

ScariTILL™ and HydraTILL® - Wide broadacre applications

Model

TransportWing width

Width of cut

Sin

gle

Wh

eel

Wal

kin

gW

hee

ls

Rig

id P

ull

Flo

atin

g H

itch

Hyd

rau

lic H

itch

Lev

elle

r

Do

ub

le F

old

Stab

ilise

r W

hee

ls

Spea

rpo

int

Shan

ks

Tin

e B

reak

-ou

t O

pti

on

(5

40lb

f &

spr

ing

tines

onl

y)

Para

llelo

gra

ms

(hyd

raul

ic t

ines

onl

y)

Fram

e M

ou

nte

d

Pres

swh

eels

1)

Co

ult

ers

1)

Width Height

m ft m ft m ft m ft

S/HW39-250 7.72 25.3 3.65 12 2.4 7.9 9.5 31.2 - s s o o - o o o o o o

S/HW41-250 7.72 25.3 3.74 12.2 2.4 7.9 10.0 32.8 - s s o o - o o o o o o

S/HW51-200 7.72 25.3 3.74 12.2 2.4 7.9 10.0 32.8 - s s o o - o o o - - o

S/HW53-200 7.72 25.3 3.93 12.9 2.4 7.9 10.4 34.1 - s s o o - o o o - - o

S/HW43-250 7.72 25.3 3.98 13.1 2.4 7.9 10.5 34.4 - s s o o - o o o o o o

S/HW55-200 7.72 25.3 4.13 13.5 2.4 7.9 10.8 35.4 - s s o o - o o o - - o

S/HW57-200 7.72 25.3 4.62 15.2 3.4 11.2 11.2 36.7 - s s o o - o o o - - o

S/HW47-250 7.72 25.3 4.62 15.2 3.4 11.2 11.5 37.7 - s s o o - o o o o o o

S/HW59-200 7.72 25.3 4.62 15.2 3.4 11.2 11.6 38.1 - s s o o - o o o - - o

S/HW49-250 7.72 25.3 4.71 15.5 3.4 11.2 12.0 39.4 - s s o o - o o - o o o

S/HW61-200 7.72 25.3 4.71 15.5 3.4 11.2 12.0 39.4 - s s o o - o o - - o

S/HW63-200 7.72 25.3 4.91 16.1 3.4 11.2 12.4 40.7 - s s o o - o o o - - o

S/HW51-250 7.72 25.3 4.96 16.3 3.4 11.2 12.5 41.0 - s s o o - o o o o o o

S/HW65-200 7.72 25.3 5.1 16.7 3.4 11.2 12.8 42.0 - s s o o - o o o - - o

S/HW55-250 7.72 25.3 5.68 18.6 4.4 14.4 13.5 44.3 - s s o o - s o o o o o

S/HW57-250 7.72 25.3 5.69 18.7 4.4 14.4 14.0 45.9 - s s o o - s o o o o o

S/HW71-200 7.72 25.3 5.69 18.7 4.4 14.4 14.0 45.9 - s s o o - s o o - - o

S/HW73-200 7.72 25.3 5.89 19.3 4.4 14.4 14.4 47.2 - s s o o - s o o - - o

S/HW59-250 7.72 25.3 5.94 19.5 4.4 14.4 14.5 47.6 - s s o o - s o o o o o

S/HW75-200 7.72 25.3 6.08 19.9 4.4 14.4 14.8 48.6 - s s o o - s o o - - o

S/HW61-250 7.72 25.3 6.18 20.3 4.4 14.4 15.0 49.2 - s s o o - s o o o o o

S/HW77-200 7.72 25.3 6.28 20.6 4.4 14.4 15.2 49.9 - s s o o - s o o - - o

S/HW93-200 8.65 28.4 5.89 19.3 DF DF 18.4 60.4 - s - s - s s o - - - o

S/HW75-250 8.65 28.4 5.89 19.3 DF DF 18.5 60.7 - s - s - s s o - o o o

S/HW57-337 2) 8.65 28.4 5.89 19.3 DF DF 18.5 60.7 - s - s - s s o - o o o

S/HW39-250 denotes ScariTILL™ or HydraTILL®, narrow centre frame with 39 tines at 250 mm spacing.

Footnotes:1) May not be possible to fit to all tines.

16 17

LEGEND- - Not Availableo Optional Equipments Standard Equipment

ScariTILL™ and HydraTILL® - Controlled Traffic

Model

TransportWing Width

Width of cut

Sin

gle

Wh

eel

Wal

kin

gW

hee

ls

Rig

id P

ull

Flo

atin

g H

itch

Hyd

rau

lic H

itch

Lev

elle

r

2m/3

m/4

m

Stab

ilise

r W

hee

ls

Spea

rpo

int

Shan

ks

Tin

e B

reak

ou

t O

pti

on

(5

40lb

f &

spr

ing

tines

onl

y)

Para

llelo

gra

ms

(hyd

raul

ic t

ines

onl

y)

Fram

e M

ou

nte

d

Pres

swh

eels

1)

Co

ult

ers

1)

Width Height

m ft m ft m ft m ft

S/HC2-19-333 4.8 15.8 3.62 11.9 1.9 6.2 6.0 19.7 s - s - o 2m - o - - - o

S/HC2-29-229 4.76 15.6 3.62 11.9 1.9 6.2 6.4 21.0 s - s - o 2m - o - - - o

S/HC2-37-178 4.8 15.8 3.62 11.9 1.9 6.2 6.4 21.0 s - s - o 2m - o - - - o

S/HC2-27-250 4.8 15.8 3.62 11.9 1.9 6.2 6.5 21.3 s - s - o 2m - o - - o o

S/HC2-23-333 4.8 15.8 4.1 13.5 2.5 8.2 7.3 24.1 s - s - o 2m - o - - o o

S/HC2-35-229 4.76 15.6 4.3 14.1 2.5 8.2 7.8 25.5 s - s - o 2m - o - - - o

S/HC2-45-178 4.8 15.8 4.32 14.2 2.5 8.2 7.8 25.7 s - s - o 2m - o - - - o

S/HC2-33-250 4.8 15.8 4.2 13.8 2.5 8.2 8.0 26.2 s - s - o 2m - o - - o o

S/HC3-27-333 6.6 21.7 3.6 12.1 2.5 8.2 8.7 28.4 s - - s - 3m o o o - - o

S/HC3-36-250 6.62 21.7 3.7 12.1 2.5 8.2 8.8 28.9 s - - s - 3m o o o - - o

S/HC3-41-200 2) 6.64 21.8 3.7 12.1 2.5 8.2 8.8 28.9 s - - s - 3m o o o - - o

S/HC3-28-333 6.6 21.7 3.94 12.9 2.5 8.2 9.3 30.6 s - - s - 3m o o o - o o

S/HC3-37-250 6.62 21.7 3.94 12.9 2.5 8.2 9.0 29.5 s - - s - 3m o o o - o o

S/HSC3-46-200 3) 6.64 21.8 4.1 13.5 2.5 8.2 9.4 30.8 s - - s - 3m o o - - - o

S/HC4-33-333 6.6 21.7 4.6 15.1 3.4 11.2 10.7 35.0 s - s o o 4m o o - - o o

S/HC4-47-250 6.7 22 4.9 16.1 3.4 11.2 11.5 37.7 s - s o o 4m o o - - o o

S/HC4-36-333 6.7 22 5.5 18 4.0 13.1 11.7 38.3 s - s o o 4m s o o - o o

S/HC3-36-333 6.6 21.7 5 16.4 4.0 13.1 11.7 38.3 s - - s - 3m s o o - o o

S/HC3-48-250 6.62 21.7 5 16.4 4.0 13.1 11.8 38.5 s - - s - 3m s o - - o o

S/HC3-37-333 6.6 21.7 5.17 17 4.0 13.1 12.0 39.4 s - - s - 3m s o o - o o

S/HC3-49-250 6.62 21.7 5.17 17 4.0 13.1 12.0 39.4 s - - s - 3m s o o - o o

S/HC3-58-200 3) 6.64 21.8 5 16.4 4.0 13.1 11.8 38.7 s - - s - 3m s o - - - o

S/HC3-57-200 2) 6.64 21.8 5.17 17 4.0 13.1 12.0 39.4 s - - s - 3m s o o - - o

S/HC4-51-250 6.62 21.7 5.41 17.8 4.0 13.5 12.5 41.0 s - s o o 4m s o o - o o

S/HC4-39-333 6.65 21.8 5.49 18 4.0 13.5 12.7 41.6 s - s o o 4m s o - - o o

S/HC2-19-333 denotes 2 m Controlled Traffic ScariTILL™ or HydraTILL® with centre frame wheels at 2 m centres with 19 tines at 333 mm spacing.

Footnotes:1) May not be possible to fit to all tines.2) No tines directly behind centreframe wheels - qty 4 omitted.3) No tines directly behind centreframe wheels - qty 2 omitted. 18 19

LEGEND- - Not Availableo Optional Equipments Standard Equipment

ScariTILL™ and HydraTILL® - Row Crop

Model

Transport

Wing WidthWidth of cut

Sin

gle

Wh

eel

Wal

kin

gW

hee

ls

Rig

id P

ull

Flo

atin

g H

itch

Hyd

rau

lic H

itch

Lev

elle

r

2m/4

m

Stab

ilise

r W

hee

ls

Spea

rpo

int

Shan

ks

Tin

e B

reak

-ou

t O

pti

on

(5

40lb

f &

spr

ing

tines

onl

y)

Para

llelo

gra

ms

1)

(hyd

raul

ic t

ines

onl

y)

Fram

e M

ou

nte

d

Pres

swh

eels

1)

Co

ult

ers

1)

Width Height

m ft m ft m ft m ft

S/HC2-19-333 4.8 15.8 3.62 11.9 1.9 6.2 6.0 19.7 s - s - o 2m - o - o o o

S/HC2-27-250 4.8 15.8 3.62 11.9 1.9 6.2 6.5 21.3 s - s - o 2m - o - o o o

S/HC2-23-333 4.8 15.8 4.1 13.5 2.5 8.2 7.3 24.1 s - s - o 2m - o - o o o

S/HC2-33-250 4.8 15.8 4.2 13.8 2.5 8.2 8.0 26.2 s - s - o 2m - o - o o o

S/HC4-51-250 6.62 21.7 5.41 17.8 4.0 13.3 12.5 41.0 s - s o o 4m s o o o o o

S/HC4-39-333 6.65 21.8 5.49 18 4.0 13.3 12.7 41.6 s - s o o 4m s o - o o o

S/HC2-19-333 denotes 2 m Row Crop ScariTILL™ or HydraTILL® with centre frame wheels at 2 m centres with 19 tines at 333 mm spacing.

Footnotes: 1) May not be possible to fit to all tines.

Critical parts like head ports and sowing boots are standard off the shelf items.

18 19

LEGEND

o

A.F. GASON PTY. LTD.Blake StreetArarat, Victoria 3377Australia

Tel. 03 5352 2151Fax. 03 5352 4695Email. sales@gason.com.au

www.gason.com.au

DEALER