sccm deployment - support.upslide.net · upslide | sccm deployment 2 upslide sas - r.c.s. paris 791...

January 2017

UpSlide

SCCM

DEPLOYMENT

Step by step guide

UpSlide | SCCM Deployment

UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40

UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589

UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346

www.upslide.net

2 | 23

Table of contents

1 Introduction ............................................................................................................................................................................... 3

2 Prerequisites Packaging ......................................................................................................................................................... 3

2.1 .NET Framework Packaging ......................................................................................................................................... 3

2.2 Visual Studio Tools for Office Runtime (VSTO) ..................................................................................................... 9

3 UpSlide Packaging ..................................................................................................................................................................17

http://www.upslide.net/





www.upslide.net

3 | 23

1 Introduction

UpSlide is fully compatible with SCCM Deployment. The following pages describe, in details, how UpSlide

should be deployed via SCCM.

2 Prerequisites Packaging

UpSlide will only function if these two Prerequisites are found on the machine:

.NET Framework 4.5.2: https://www.microsoft.com/en-us/download/details.aspx?id=42642

Visual Studio Tools for Office Runtime 2010: https://www.microsoft.com/en-

us/download/details.aspx?id=48217

2.1 .NET Framework Packaging

For UpSlide to function, .NET Framework needs to be installed. This section describes How to create the

package on System Center Configuration Manager.

The first step is to download the offline package of .NET Framework from this link:

https://www.microsoft.com/en-us/download/details.aspx?id=42642

Once downloaded, open the Configuration Manager Console:

Fig. 1: Configuration Manager Console










www.upslide.net

4 | 23

Next, go to Applications and select Create Application.

Fig. 2: Create a New Application

On the General page of the Create Application Wizard, select Manually specify the application

information, then click on Next.

Fig. 3: General Page

Specify general information about the Application such as Name, and Version.

Fig. 4: General Information

On the Application Catalog page, enter Application details such as name and language and click on Next:






www.upslide.net

5 | 23

Fig. 5: Application Catalog

On the Deployment Types page of the Create Application Wizard, click on Add to create a new

deployment type.

Fig. 6: Add a new Deployment Type

The Create Deployment Type Wizard will open.






www.upslide.net

6 | 23

On the General page of the Create Deployment Type Wizard, select Manually configure the deployment

type information.

Fig. 7: Create Deployment Type Wizard

On the General Information page, enter deployment details such as the Name and comments, and click on

Next.

Fig. 8: General Information






www.upslide.net

7 | 23

On the Content Page, fill these two fields:

Content Location: Path to .NET Framework Install File (1)

Installation Program: {.NET Install Filename}.exe /q /norestart (2)

Fig. 9: Content Page

Next, configure the detection methods to indicate the presence of the application with these settings:

Setting type: Registry,

Hive: HKEY_LOCAL_MACHINE,

Key: SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full,

Value: Release,

Data Type: Integer,

Select “This Registry Settings Must Exist on the Target System to indicate presence of this Application”.






www.upslide.net

8 | 23

Fig. 10: Detection Methods Parameters

Validate the Detection Rule, on the User Experience screen specify these settings:

Installation Behavior: Install for System,

Logon Requirement: Only when a user is logged on,

Installation program visibility: Normal.

Fig. 11: User Experience

Click on Next and leave Requirements and Dependencies pages with default settings. Close the

Deployment Type Creation wizard.






www.upslide.net

9 | 23

Fig. 12: Deployment Type Successfully Created

On Application Creation Wizard under Deployment Types page select the newly created deployment

type and click on Next.

Fig. 13: Deployment Types

Close the Application Creation Wizard. You can now push your Application to the Distribution Point.

2.2 Visual Studio Tools for Office Runtime (VSTO)

For UpSlide to function, Visual Studio Tools for Office Runtime needs to be installed. Please follow these

steps to create the package on System Center Configuration Manager.

The first step is to download the offline package of VSTO from this link: https://www.microsoft.com/en-

us/download/details.aspx?id=48217

Once downloaded, open the Configuration Manager Console:

Fig. 14: Configuration Manager








www.upslide.net

10 | 23

Next, go to Applications and select “Create Application”.

Fig. 15: Create Application

On the General page of the Create Application Wizard, select Manually specify the application

information, and click on Next.

Fig. 16: General Page






www.upslide.net

11 | 23

Specify general information about the Application such as Name, and Version and click on Next.

Fig. 17: Application Information

On the Application Catalog page, enter applications details such as name and language and click on Next.

Fig. 18: Application Catalog






www.upslide.net

12 | 23

On the Deployment Types page of the Create Application Wizard, click Add to create a new deployment

type:

Fig. 19: Add a New Deployment Type

The Create Deployment Type Wizard will open, on the General page of the Create Deployment Type

Wizard, select Manually configure the deployment type information:

Fig. 20: Create Deployment Type Wizard






www.upslide.net

13 | 23

On the General Information page, enter Deployment details such as the Name and comments, and click

on Next:

Fig. 21 General Information

On the Content Page, fill these two fields:

Content Location: Path to VSTO Install File (1),

Installation Program: {VSTO Install Filename}.exe /q /norestart (2).

Fig. 22: Content Page






www.upslide.net

14 | 23

On the next Screen the Detection method needs to be defined, select Add a Clause and fill with these

settings:

For x64 Systems:

Settings Type: Registry,


Key: SOFTWARE\WOW6432Node\Microsoft\VSTO Runtime Setup\v4

Value: Version,

Data Type: String,

Select “This Registry Settings Must Satisfy the following rule to indicate the presence of the application”.

Operator: Equals

Value: Version of VSTO downloaded (on our case 10.0.60301)

For x86 Systems:

Settings Type: Registry,


Key: SOFTWARE\Microsoft\VSTO Runtime Setup\v4,

Value: Version,

Data Type: String,

Select “This Registry Settings Must Satisfy the following rule to indicate the presence of the application”.

Operator: Equals

Value: Version of VSTO downloaded (on our case 10.0.60301)

Fig. 23 VSTO Detection Clauses






www.upslide.net

15 | 23

You can keep the two clauses to ensure compatibility with x64 and x86 Clients, the condition between the

two clauses needs to be changed first from AND to OR.

Fig. 24: Detection Clauses Conditions

Validate the Detection Rule, on the User Experience screen specify these settings:

Installation Behavior: Install for System,

Logon Requirement: Only when a user is logged on,

Installation program visibility: Normal.

Fig. 25: User Experience






www.upslide.net

16 | 23

Click on Next and close the Deployment Type Creation Wizard.

Fig. 26: Deployment Type successfully created

On Application Creation Wizard under Deployment Types page select the newly created deployment

type and click on Next.

Fig. 27: Select Deployment Type

Close the Application Creation Wizard. You can now push your Application to the Distribution Point.






www.upslide.net

17 | 23

3 UpSlide Packaging

The last part consists in creating UpSlide Application in SCCM and make Prerequisites install with UpSlide if

they are not detected on the computer.

Open the Configuration Manager Console.

Fig. 28: Configuration Manager Console

Next, go to Applications and select Create Application.

Fig. 29: Create Application






www.upslide.net

18 | 23

On the General page of the Create Application Wizard, select Automatically detect information about

this application from installation files:

Type: Windows Installer (*.msi file),

Location: Path to UpSlide MSI Installer.

Fig. 30: Create Application Wizard

Click on Next, default parameters should be loaded automatically.

Fig. 31: Automatic Detection from MSI File






www.upslide.net

19 | 23

On the General Information page, the next step consists in configuring UpSlide installer to run silently.

Fill the Setup Software field, by default fill with: msiexec /i "UpSlide.msi" /q EXEOPTIONS="-q2".

You can adjust with the UpSlide Installer Switches:

-q2 to force install to be silent.

"LANG=en-US" to force the UpSlide User Interface to be in English. You can of course change

the UI language and replace en-US by any supported language UID.

o Supported languages are: en-US, fr-FR.

TsuRunMode=2 to force uninstall.

/a1 to force single user install.

/a4 to force all user install (setup will request an administrator password to proceed if current

user does not have sufficient permissions).

"KeepExistingConfig=1" to force UpSlide to install on top of any existing version. In that case,

the configuration folder is not modified by a new installation. Useful when the customization

should not be impacted by deployment.

"DeployReactivationService=1" to deploy the reactivation service.

Example for Silent Install and Reactivation Service:

msiexec /i "UpSlide.msi" /q EXEOPTIONS =”-q2 DeployReactivationService=1”.

Fig. 32: Installer Switches


https://upslide.zendesk.com/knowledge/articles/218152463





www.upslide.net

20 | 23

To have the Application marked as Successfully installed by SCCM, the detection method needs to be

changed first.

Go back to Configuration Manager Console -> Applications -> UpSlide and go to Deployment Types.

Fig. 33: Deployment Types

Edit the properties of the Deployment type associated with UpSlide Application.

• Right Click on Deployment Type -> Properties -> Detection Methods.

Fig. 34: Change Detection Method

Remove the Default Detection Method which is based on the MSI Product code. And Add a new clause:

Setting Type: File System,

Type: File,

Path: C:\ProgramData\UpSlideBinaries,

File name: Finance3point1.UpSlide.Engine.dll,

Select This file setting must exist on the target system to indicate presence of this application






www.upslide.net

21 | 23

Fig. 35: New Detection Method Settings

Next step is to tell SCCM to install UpSlide for All Users on the computer.

Go to User Experience, and on Installation Behavior select Install for System.

Fig. 36: User Experience Settings






www.upslide.net

22 | 23

The last step of this guide is to add the dependencies to VSTO and .NET Runtime packages configured

earlier in this guide.

On Dependencies Tab Add two dependencies to .NET Runtime Applications and VSTO Application.

Fig. 37: Dependencies Configuration

Click on OK. The UpSlide package is now successfully configured and ready to be pushed to users.


PARIS

20, Avenue de l’Opéra,

75001 Paris

LONDON

Level 39, One Canada Square,

Canary Wharf,

London, E14 5AB

NEW YORK

1460 Broadway, New York,

NY 10036

sccm deployment - support.upslide.net · upslide | sccm deployment 2 upslide sas - r.c.s. paris 791...

Documents