schede latitude a4tread builder builder developed for the cold retreading industry and designed to...
TRANSCRIPT
TREAD BUILDERBuilder developed for the cold retreading industry and designed to apply pre-cured tread strips on truck, bus and light transport vehicle tyre casings. It is equipped with a support for application of calendered cushion gum and an automatic rotating knife to cut the pre-cured tread strips.The machine can be tread roll lifting system provided.
KEY FEATURES• For tyres from 15” to 24”, including 445/65R22,5”
• Expandable chuck unit driven centrally with gearbox motor
• Automatic stitching cycle (Radial stitching)
• Limit switch for automatic tread length control
• Foot pedal that controls tyre rotation in both directions for manual cushion gum application
• Rotating knife integrated in the machine
• Crank for poly removal
• Full tread rolls lifting system
• Automation components Rockwell
3552
1548
3552
1548
LAYOUT
(image just for illustrative purposes the machine may have different configurations)
Shamrock marketing, inc11206 Bluegrass parkway - louisville, ky 40299 - [email protected] - www.Shamrockmarketinginc.Com
TECHNICAL DATAPower Supply Voltage 400/460 V - 50/60 Hz
Total installed power 5kW
Tyre diametermin. 600 mm - 23,6’’max. 1260 mm - 49,6’’
Tread widthmin. 160 mm - 6,3’’max. 460 mm - 18,1’’
Bead diameter min. 15’’ – max. 24’’
Air supply pressure 8 bar (120 psi)
Width 71 inches
Height (from the floor) 83 inches
Length 138 inches
Weight 4.000 pounds
OPTIONAL:• Tread roll lifting system
TREAD BUILDER