schmidt offers the worldwide largest selection made of
TRANSCRIPT
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
TS SeriesET Series SC Series
DN Series DT Series
DX SeriesZ Series ZE Series
Version ZE 6 /2 011 Language
SCHMIDT offers the worldwide largest selectionof Tension Meters in
made
Germany
2
c o n t r o l i n s t r u m e n t s
www.hans-schmidt.com
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Today, more than 170.000
SCHMIDT tension meters are
used worldwide.
Please visit us in the World Wide Web !
M O R E T H A N
Y E A R S
Click to select the desired product group ...
Click for the desired series ...
... you will fi nd detailed, latest information for the product you are looking for !
In reponse to today’s needs, involving new advanced materialsand stricter production standards, SCHMIDT offers a large selectionof tension meters and ranges to satisfy those requirements.
Competition is constantly changing. Higher effi ciency requirementsand continuous quality control make monitoring of tension more importantthan ever. If, for instance, the winding tension of a copper wireis too high, the wire diameter will decrease, resulting in a changein the electrical resistance. With natural fi bers, excessive fi ber tension leads to a change in characteristic. With synthetic fi bers, this results in irreversible molecular shifts, which may cause the fabric to dye unevenly. The inevitable consequence is a product of poor quality.
SCHMIDT tension meters help you eliminate tension-related defects.
We solve tension-measuring problems.More than 60 years. Worldwide.In 1948, the founder of the company Mr. Hans Schmidt started sellingand distributing yarns and textile machinery.He became aware of the importance which the control of tension hadfor production processes, and soon developed and constructeda 3-Roller Tension Meter which featured one measuring roller andtwo guiding rollers. This ingenious principle of operationhas been proved to be the best method for tension measuring. The 3-roller measuring system has become the hallmark of all SCHMIDT tension meters and remains unsurpassed in its effi ciency even today. Since 1962, the company’s headquarter is in Waldkraiburg, located near Munich, Germany.
3
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Examples of typical applications 4
SCHMIDT Quality Management 7
What you should know about SCHMIDT tension meters 8
Guidelines for selecting the right tension meter 9
Hand-Held, mechanical
Z Series: Model ZF2, ZD2 A 1 – 2DX Series: Model DX2 A 3 – 4 Model DXE, DXV, DXP A 5 – 6 Model DXF, DXL A 7 Model DXK, Model MKM A 8 Model DXB, DXR, DXT A 9 – 10DN Series: Model DN1 A 11 – 12
Stationary, mechanical
Model Q, MK, DX2S B 1 – 2
Hand-Held, electronic
PT Series: Model PT-100, PT-100-L C 1 – 2Z E Series: Model ZEF, ZED C 3 – 4DT Series: Model DTMB, DTMX C 5 – 9 Model DTEB, DTEX, DTVB, DTVX C 10 Model DTFB, DTFX, DTLB, DTLX C 11 Model DTBB, DTBX C 12ET Series: Model ETB, ETX, ETPB, ETPX C 13 – 14MST Series: Model MST C 15KXE Series: Model KXE C 15SZM Series: Model SZM1, SZM2, SZM3 C 16
Stationary, electronic
Online Measuring Systems: D 1TS Series: Sensor Model TS1 D 2 Sensor Model TSP, TSH D 3 Sensor Model TSL, TSF D 4 Sensor Model TSB1, TSB2 D 5LTS Series: Sensor Model LTS D 6Specifi cations: TS Series, Sensor LTS-422 D 7SC Series: Display Units Model SC-PM, SCD-1 D 8RFS Series: Sensor Model RFS, RFSE D 9 – 10
Customized designs E
Guide roller dimensions and optional accessories F
The best tension meter for Gyour application:On the application guide fold out page,you will fi nd suggestions for our differentmodels, grouped according to theirapplication in the textile and wire industries.This makes it easy to select the modelsthat suit your specifi c application.
Tension meters for special applications H
Mailing address:HANS SCHMIDT & CO GMBHP. O.B. 1154844 64 Waldkraiburg, Germany
Shipping address:HANS SCHMIDT & CO GMBHSchichtstrasse 1684478 Waldkraiburg, Germany
Phone:int. + 49 (0) 86 38 / 9410 - 0
Fax:int. + 49 (0) 86 38 / 48 25int. + 49 (0) 86 38 / 678 98
e-mail:info @ hans-schmidt .com
Internet:www.hans-schmidt.com
Contents Page
A
B
C
D
F
G
H
SCHMIDT offersthe worldwidelargest selection ofTension Meters: 12 different series, 44 models and more than 2000 possible variations ...
Wherever precision andsuperior quality are essentialin producing and processing Threads Yarns Fibers Carbon fi bers Split tapes Rovings Wires Cables EDM wires Steel Cord Sawing wires Fiber optics Tapes & narrow fabrics Foil strips Films, etc.
SCHMIDT tension metersare indispensable in produc-tion monitoring, qualitycontrol, automation, andprocess engineering.Take benefi tof our experience !
E
4
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Should you need customized solutions to yourmeasuring problem, please contact us.We will be glad to design a model for yourspecial application.
SCHMIDT Tension Meters are used throughoutthe world in a wide variety of typical aswell as special applications.A few samples are shown below.
In WireEDM Technologyfor machines toremachine profi ledcutting tools
In theWire Industries e.g. for wiredrawing or winding machines
In the OpticalFiber Productione.g. winding machine
In theMan-MadeFiber Productione.g. doubling twister
In Textile IndustryOnline tension sensor to controlthe bobbin creel
In the KnittingIndustryexact adjusting ofyarn feeders of circularknitting machines
5
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
In theAutomotiveIndustryproducing tires andAirbag-fabrics
In Industriesprocessing carbon fi bers and NAV
In the Wire EDMTechnologythe correct adjusted tensionis the condition for bestexact cuts cutting tools
In the Fiber Producing Industrye.g. for winding machines
Currency Printing andLetter Sortingprecise adjustment of thetransport belt ensures that the product is not damaged during transport
Solar Industrye. g. wafer cutting machines
6
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
In the Aircraft Industryproducing parts made byfi ber-reincorced materials forairplanes on embroidery machines In Satellite Technology
before launching accurately tension settingof the cables holding the solar panels
For Technical Fibersproducing harvesting nets and protection nets with warpknitting machines
In OpticFiber Producing Industrythe above illustration showsa motor-operated measuringunit designed to measureautomatically the tensions of12 optic fi bers simultaneously
In Telecommunicationscontinuous tension monitoringis essential in the productionand processing of copper wiresand optic fi bers
In the Medical Industry e.g. producing bandages and sutures
SCHMIDT custom-
made confi guration
SCHMIDT Tension Meters are usedthroughout the world.
c o n t r o l i n s t r u m e n t s
7
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
QUALITY..............CHECKED BY SCHMIDT
SCHMIDTQuality Management
Warranty: SCHMIDT tension meters are subject to stringent quality checks. We therefore guarantee all our tension meters for 12 months. Improper use, abuse and parts subjected to wear (e.g. guide rollers) are excluded from coverage.
Delivery includes: Tension meter(with carrying case if hand-held model),Certifi cate of Compliance with the order 2.1 operating instructions in English or German as requested
HANS SCHMIDT & Co GmbH was the fi rst tension meter manufacturer tobe certifi ed according to International Standard DIN EN ISO 9001.
Sample of Calibration Report
The optional Inspection Certifi cate includes a calibration report.
It can be ordered also for instruments which were sent for repair.
This emphasizes our continuous commitment to quality which ensures that our staff produces the highest quality products. This also gives you the confi dence in a company in which quality and customer service has the highest priority.
The SCHMIDT Quality Management covers the area of design, development, production, installation and maintenance of our tension meters. Calibration Standards: Since there are no international standards for the calibration of tension meters, we have established and documented a SCHMIDT Standard which is accepted worldwide. SCHMIDT Quality Control When completed, each instrument undergoes an extensive fi nal quality check ensuring proper operation as well as a fi nal calibration verifi cation. Only those instruments meeting our strict quality regulations receive the SCHMIDT Quality Seal. This is also confi rmed in a Certifi cate of Compliance with the order 2.1 which is supplied free of charge with the instrument. SCHMIDT Inspection Certifi cate 3.1 A Inspection Certifi cate according to European Standard EN 10204, which includes a Calibration Report, is optionally available. The Calibration Report shows the measured values compared to the standards. This verifi cation of the calibration is performed prior to shipment. The Calibration Label is fi xed on the instrument, indicating the calibration date. ISO 9000 – certifi ed companies frequently require such a Inspection Certifi cate to verify inspection of their measuring, inspection and test equipment. Our Inspection Certifi cate according to EN 10204 is the European equivalent to the test reports of other international organizations, such as NIST (USA) or JAL (Asia).
The optional Inspection Certifi cate includes a calibration report.
This emphasizes our continuous commitment to quality which ensures that our staff produces the highest quality products. This also gives you the confi dence in a company in which quality and customer service has the highest priority.
The production, installation and maintenance of our tension meters. Calibration Standards: the calibration of tension meters, we have established and documented the calibration of tension meters, we have established and documented a SCHMIDT Standard which is accepted worldwide. a SCHMIDT Standard which is accepted worldwide. SCHMIDT Quality Control When completed, each instrument undergoes an extensive fi nal quality check ensuring proper operation as well as a ensuring proper operation as well as a Only those instruments meeting our strict quality regulations Only those instruments meeting our strict quality regulations This is also confi rmed in a This is also confi rmed in a SCHMIDT Inspection Certifi cate SCHMIDT Inspection Certifi cate A includes a Report shows the measured values compared to the standards. This verifi cation of the calibration is performed prior to shipment. The the calibration date. ISO 9000 – certifi ed companies frequently require such a measuring, inspection and test equipment. Our Our European equivalent to the test reports of other international European equivalent to the test reports of other international organizations, such as NIST (USA) or JAL (Asia).
The optional Inspection Certifi cate includes a calibration report. organizations, such as NIST (USA) or JAL (Asia).
The optional Inspection Certifi cate includes a calibration report.
measuring, inspection and test equipment.
c o n t r o l i n s t r u m e n t s
S C H M I D T
DTMX -1000 - E
22
40
50 -1000
E
580 -02653
50 52
49 700 695 7
00
100 101 98
900 903 904
200 198 198 1
000 1004 1005
500 499 503
0,2 0,4
14.06.2011 A. Meisl
Calibration Report Page 2 from 2 Pages
2011
1
7
4
2
35
68
910
11
12
X X
X
1
2
3 3 4
56
7
8
1
4
3
2
8
X
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Special scale for customer materials:
Special calibration to customer-supplied material is optionally available.This takes into account the customermaterial’s rigidity and diameter, if itdiffers signifi cant from the SCHMIDTcalibration material. Special calibration
General Information on SCHMIDT Tension Meters
The width of the measuring head varies with the modeldesign and the tension range. Dimension »X« defi nes the mini-mum access space required along the material path. It isdetermined by the width of the fi lament guide, the distancebetween the two outer guide rollers, or the outside dimensionsof the front plate, whichever is the largest.
Operating elements DX2:
All SCHMIDT tension metersfeature the 3-roller measuringsystem. The center measuring rolleris defl ected by the tension of themeasured material. This measuringprinciple assures highest accuracyand repeatability.All rollers are equipped withprecision ball bearings.
SCHMIDT tension
meters – everything in
operator’s view:
the guide rollers
the measured material
the readings
Material thickness compensator:
SCHMIDT hand-held tension metersare equipped, if necessary, witha material thickness compensator.This exclusive feature is only found onSCHMIDT tension meters and mini-mizes any error caused by changingmaterial diameters.
1 Material sample 2 + 3 two Discs 4 Sample holder clip
SCHMIDT calibration:
To ensure highest precision, eachtension meter is individually calibratedaccording to the SCHMIDT factoryprocedure. For calibration a knownweight is suspended from the standardcalibration material, vertically, asshown in the fi gure.This method is accepted – worldwide –as the industry standard.
Measuring head width on hand-held instruments:
Measuring head width on online sensors:
Filament guide and roller-shifting mechanism ensure easy acquisition of the running material
1 Measured material2 Measuring roller (center guide roller)3 Outer guide rollers4 Filament guide5 Scale6 Thumbpiece7 Sample holder clip8 Material thickness compensator
to two different materials is optionally available.
Subj
ect
to c
hang
e w
ithou
t no
tice.
9
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Guidelines for selectingthe right SCHMIDT Tension Meter 1. Select the desired model:
According to your desired use: – Hand-held or stationary model – Mechanical or electronic model According to application: Selection Guide see page G
2. Determine the appropriate tension range:
Recommendations for typical textile and wire applications:
20 cN Filament: 25 tex 25 tex max. 0.05 mm Ø 50 cN PA: 0.12 mm Ø 50 tex max. 0.08 mm Ø 120 cN PA: 0.12 mm Ø 120 tex max. 0.13 mm Ø 200 cN PA: 0.12 mm Ø 200 tex max. 0.17 mm Ø 300 cN PA: 0.20 mm Ø 300 tex max. 0.20 mm Ø 400 cN PA: 0.20 mm Ø 400 tex 0.10 - 0.25 mm Ø 500 cN PA: 0.20 mm Ø 500 tex 0.10 - 0.25 mm Ø 1000 cN PA: 0.30 mm Ø 1000 tex 0.10 - 0.40 mm Ø 1500 cN PA: 0.30 mm Ø 1500 tex 0.15 - 0.50 mm Ø 2000 cN PA: 0.50 mm Ø 2000 tex 0.30 - 0.60 mm Ø 3500 cN PA: 0.80 mm Ø 3500 tex 0.35 - 0.80 mm Ø 5000 cN PA: 0.80 mm Ø 5000 tex 0.40 - 1.00 mm Ø 8000 cN PA: 1.00 mm Ø 8000 tex 0.50 - 1.10 mm Ø 10 daN PA: 1.00 mm Ø 10000 tex 0.70 - 1.20 mm Ø 20 daN PA: 1.50 mm Ø 20000 tex 1.20 - 1.70 mm Ø 30 daN PA: 1.50 mm Ø 30000 tex 1.50 - 2.00 mm Ø 50 daN Steel rope: 50000 tex 1.50 - 2.50 mm Ø 1.50 mm Ø (7 x 7 x 0.20)* Tension measured in N (Newton): 1 cN = 1.02 g = 0.01 N; 1 daN = 1.02 kg = 10 N;** Calibration with standard materials – such as polyamide monofi lament (PA) – according to the SCHMIDT factory procedure has been proved to provide the best results for 95 % of all industrial applications.
Tensio
n Range*
up to T
extile In
dustry
e.g. ya
rn count
max. S
CHMIDT
Calibration
Material**
If your material to be measured differs in kind and diameter: Please contact us for assistance to determine the right tension range and model. For this purpose a material sample of 5 m should be supplied.
Wire
Industry
e.g. co
pper wire,
soft-annealed
If you need assistance ... Should you need any help in selecting yourtension meter, please contact us directly, or the service department of yourmachinery supplier. In any case, please furnish the following information: Description of application and machinery Description of the material to be measured (Ø, type, characteristics, etc.) Line speed of the material Recommended or estimated tension Maximum measuring head width or available access space If necessary, submit a material sample of about 5 m
Note: We recommend selecting the tension range twicethe tension you intend to measure. This has the advantagethat you can measure higher than expected values. It alsofacilitates reading the measured tension on analog scales.
3. Select the guide rollers according to the following criteria:
– Roller shape V-grooved or with asymmetrical groove ... – Roller shape U-grooved with radius or cylindrical ... – Roller material (hardcoated aluminium, plastic, steel, etc.) ... – Max. line speed of the measured material ... see page F
4. Required accessories: see page F
– Adjustable damping – Special lever – Memory pointer
5.Special custom-made designs: on request
– Special tension ranges – Customized measuring head widths for applications with limited access space – Customized distance between the two outer rollers to minimize material defl ection – Calibration for material path other than vertical – Calibration to different units, such as g or kg
6. Calibration using customer-supplied material:
This is recommended when the material to be measureddiffers signifi cantly from the SCHMIDT calibration materialin diameter, rigidity or shape etc. For this purposea material sample of about 5 m should be supplied.
7. Inspection Certifi cate and Calibration Reports:
These Quality Certifi cates are optionally available and arerecommended especially for ISO 9000 certifi ed companies.
A wide variety of rollertypes are offered dependingon the material to bemeasured:
unsymmetrical cross sections
fl exible, with small diameters
fl exible, with large diameters
sensitive materials
tapes and bands
A
ZF2-5
ZF2-10
ZF2-12
A 1
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Subj
ect
to c
hang
e w
ithou
t no
tice.
Economical low tension measuring instrumentsfor checking fi bers, yarns and fi ne wires
Actual size
Model ZF2-12
Hand-Held, mechanicalZ Series
Z SERIES10 Tension rangesfrom 1 - 5 cN to 20 - 300 cN
Special features:
Light weightLarge, easy to read scale (54 mm Ø)Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Standard features:
Everything in operator’s view: – the guide rollers – the measured material – the readings Ball-bearing mounted, V-grooved guide rollers Each instrument is individually calibrated for highest accuracyHousing made of high-strength plasticInspection Certifi cate with calibration report optionally available
Slim fi lament guide with
small guide rollers – ideal
for limited access space
With bigger rollers
for universal use
Actual size
Model ZD2-100
A
ZF2-20 ZF2-30 / ZD2-30 ZF2-50 / ZD2-50 ZF2-100 / ZD2-100 ZD2-150 ZD2-200 ZD2-300
A 2
c o n t r o l i n s t r u m e n t s
Model ZF2Most popular tension
meter in the textile industry
with small rollers ! Model ZD2
Available Models
MODEL
ZF2-5 1 - 5 43 Filament: 25 tex ZF2-10 1 - 10 43 Filament: 25 tex ZF2-12 1 - 12 43 Filament: 25 tex ZF2-20 2 - 20 43 Filament: 25 tex ZF2-30 3 - 30 43 PA: 0.12 mm Ø ZF2-50 5 - 50 43 PA: 0.12 mm Ø ZF2-100 10 - 100 43 PA: 0.12 mm ØOther tension ranges available on request. Other units of measure available, such as g.* Width of fi lament guide** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Specifi cations ZF2 Series
Calibration: According to SCHMIDT factory procedure Accuracy: ±1 % full scale or ±1graduation on scale Scale diameter: 54 mm Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Housing material: Plastic (POM) Housing dimensions: 157 x 85 x 32 mm (L x W x H) Weight, net (gross): approx. 200 g (600 g)
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 900 Hardcoated aluminium Code K 2000 Hardcoated aluminium Code T 450 Plastic (POM) black Code W 450 Nickel-plated steel
Available Models
MODEL
ZD2-30 3 - 30 63 PA: 0.12 mm Ø ZD2-50 5 - 50 63 PA: 0.12 mm Ø ZD2-100 10 - 100 63 PA: 0.12 mm Ø ZD2-150 20 - 150 63 PA: 0.12 mm Ø ZD2-200 20 - 200 63 PA: 0.12 mm Ø ZD2-300 20 - 300 63 PA: 0.20 mm ØOther tension ranges available on request. Other units of measure available, such as g.* Width of fi lament guide** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Guide Rollers see page F
V-grooved
Standard 2000 Hardcoated aluminium Code K 3500 Hardcoated aluminium Code H 5000 Plasma-coated aluminium (for Model ZD2-100 and higher ranges) Code T 1000 Plastic (POM) black Code W 1000 Nickel-plated steel Code ST 1000 Hardened steel Code CE 1 1000 Ceramic
To place an orderplease indicate the complete model number, e.g.: ZD2-100 + K = ZD2 – 100 – K
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Complete Order N
o.
Universal tension meter for
a variety of applications in the
textile and wire industries
SCHMIDT scales are manufactured according to the most stringent quality requirements. Printed scales are not used. Instead, each scaleis individually marked for the instrument involved. This ensures highest quality. Our special procedure makes it possible to provide tensionmeters fi ne tuned to a specifi c tension range, or calibrated to custom supplied material, or units of measure such as g.
Hand-Held, mechanicalZ Series
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Roller
Mater
ial Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial Li
ne Speed
vmax. ...
m / min
Specifi cations ZD2 Series
Calibration: According to SCHMIDT factory procedure Accuracy: ±1 % full scale or ±1graduation on scale Scale diameter: 54 mm Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Housing material: Plastic (POM) Housing dimensions: 157 x 85 x 32 mm (L x W x H) Weight, net (gross): approx. 220 g (620 g)
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
A
DX2-50 DX2-120
DX2-200 DX2-400
DX2-1000 DX2-2000
DX2-5000 DX2-8000
DX2-10 K DX2-20 K
DX2-2000 EDM DX2-3000 EDM
A 3
c o n t r o l i n s t r u m e n t s
DX2-3000 EDM
DX2-50
DX2-200
DX2-1000
DX2-5000
DX2-10 K
DX2-2000 EDM
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Actual size
Model DX2-200
Hand-Held, mechanicalDX Series
Universal tension metersfor most industrial applications
DX SERIES12 Tension rangesfrom 10 - 50 cN to 5 - 20 daN
Special features:
Built-in material thickness compensator improves accuracy for changing diameters on DX2-1000 and higher rangesSpecial fi nger support reduces the effort to move the outer roller assemblyFilament guide and roller shifting mechanism ensure easy acquisi- tion of the running materialCustom-built confi gurations and special calibration are availableBuilt-in mounting holes permit fi xed installation for continuous tension measurement
Standard features:
Everything in operator’s view: – the guide rollers – the measured material – the readings Ball-bearing mounted, V-grooved guide rollers Each instrument is individually calibrated for highest accuracy 41 mm Ø scale Rugged aluminium housing Inspection Certifi cate with calibration report optionally available
Best selling tension meter
worldwide !
fi g. 1: Adjustable damping(Code A) toprovide steadytension readings(see page F)
fig. 2: Special fi nger support located on the rear side of the housing
fi g. 3: Material thicknesscompensator with materialsample inserted
SCHMIDT scales are manu-factured according to the moststringent quality requirements.Printed scales are not used. Instead, each scale is indivi- dually marked for the instru- ment involved. This en- sures highest quality. Our special procedure makes it possible to provide tension meters fi ne tuned to a specifi c tension range, or cali- brated to custom supplied material, or units of measure such as g or kg.
Subj
ect
to c
hang
e w
ithou
t no
tice.
without dampingwith damping
A
A 4
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
Available Models
MODEL
DX2-50 10 - 50 66 PA: 0.12 mm Ø DX2-120 20 - 120 66 PA: 0.12 mm Ø DX2-200 20 - 200 66 PA: 0.12 mm Ø DX2-400 20 - 400 66 PA: 0.20 mm Ø DX2-1000 50 - 1000 66 PA: 0.30 mm Ø
DX2-2000 200 - 2000 116 PA: 0.50 mm Ø
DX2-5000 400 - 5000 116 PA: 0.80 mm Ø
DX2-8000 1000 - 8000 116 PA: 1.00 mm Ø
DX2-10 K 2.5 - 10 daN 116 PA: 1.00 mm Ø
DX2-20 K-L 5 - 20 daN 216 PA: 1.50 mm Ø
Other tension ranges and measuring head widths available on request.Other units of measure available – g or kg.* Depending on model, either width of fi lament guide or outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Specifi cations DX Series
Calibration: According to SCHMIDT factory procedure Accuracy: ±1 % full scale or ±1graduation on scale Scale diameter: 41 mm Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Housing material: Die-cast aluminium Housing dimensions: 188 x 85 x 45 mm (L x W x H) Weight, net (gross): up to DX2-10 K approx. 470 g (1000 g) DX2-20 K-L approx. 580 g (2000 g)
Hand-Held, mechanicalDX Series
Model DX2
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Mater
ial
thickn
ess co
m-
pensator
included
Guide Rollers see page F
V-grooved
Standard 2000 Hardcoated aluminium Code K 3500 Hardcoated aluminium Code H 5000 Plasma-coated aluminium (for Model DX2-120 and higher ranges) Code T 1000 Plastic (POM) black Code W 1000 Nickel-plated steel Code ST 1000 Hardened steel Code B 1000 Tempered steel for tire cord Code CE 1 1000 Ceramic Code ASY 1000 Hardcoated aluminium* Code ASYB 1000 tempered steel for tire cord* asymmetrical groove (for Model DX2-120 and higher ranges)
U-grooved
Code U 2000 Hardcoated aluminium
Wire EDM version(Code EDM)
Model DX2-2000-EDM
with special lever (Code L) foreasy use on higher tension ranges
Model DX2-10 K-L
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
DX2-400 + H + A – M = DX2 – 400 – H – A – M
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Optional Accessories see page F
Code A Air damping (Model DX2-120 to DX2-5000 only)
Code L Special lever (standard for Model DX2-20 K
– recommended for Model DX2-10 K – Code M Memory pointer (DX2-120 and higher ranges)
Code EDM Version for electro discharging machines Model DX2-2000-EDM: 50 - 2000 cN
Model DX2-3000-EDM: 100 - 3000 cN
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Please ask for additional
informations !
*Gauge without fi lament guide
A
A 5
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Model DXESpecial tension meter for limitedaccess space
Hand-Held, mechanicalDX Series
Available Models
MODEL
DXE-50 10 - 50 38 47 PA: 0.12 mm Ø DXE-120 20 - 120 38 47 PA: 0.12 mm Ø DXE-200 20 - 200 38 47 PA: 0.12 mm Ø DXE-400 20 - 400 38 47 PA: 0.20 mm Ø DXE-1000 50 - 1000 36 47 PA: 0.30 mm Ø DXE-2000 200 - 2000 36 47 PA: 0.50 mm ØOther tension ranges available on request. Other units of measure available, such as g.* Width of bracket assembly** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Measurin
g Head Width X*
approx.
mm
Measurin
g Head Length Y
approx.
mm
Guide Rollers see page F
Models DXE, DXV
V-grooved
Standard 900 Hardcoated aluminium Code K 2000 Hardcoated aluminium Code T 450 Plastic (POM) black Code W 450 Nickel-plated steel
Optional Accessories see page F
Models DXE, DXV, DXP
Code A Air damping (Model -120 and higher ranges)
Code M Memory pointer (Model -120 and higher ranges)
Special purpose models feature smallmeasuring heads, where access space is limitedor where fi laments run close togetherThese tension meters are recommended wherethe standard Model DX2 cannot be used.
Special features:
Turned-up outer fi nger edges guide the running fi lament into the roller grooves Small, ball-bearing mounted, V-grooved guide rollers (Models DXE and DXV) Model DXP features ceramic pins for applications with high line speeds or texturizing machines Special calibration using customer supplied samples is available (Models DXE and DXV only) Standard features same as Model DX2 Note: The below models do not include a material thickness compensator
Guide Pins see page F
Model DXP
V-grooved
Standard 6000 Oxide ceramic 5 mm Ø
Specifi cations same as Model DX2 (see page A 4)
fi g. 1: Measuring head, Model DXE
with guide rollers (Code K)for line speeds upto vmax. 2000 m/ min
Model DXE-400-K
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Li
ne Speed
vmax. ...
m / min
Pin M
aterial
Subj
ect
to c
hang
e w
ithou
t no
tice.
SCHMIDT
Calibration
Material**
A
A 6
c o n t r o l i n s t r u m e n t s
Model DXVThis special design provides easier reading when thestandard design makes dial reading diffi cult
Model DXPNon-rotating ceramic pins permitline speeds up to vmax. 6000 m / min
Hand-Held, mechanicalDX Series
Available Models
MODEL
DXV-50 10 - 50 40 38 PA: 0.12 mm Ø DXV-120 20 - 120 40 38 PA: 0.12 mm Ø DXV-200 20 - 200 40 38 PA: 0.12 mm Ø DXV-400 20 - 400 40 38 PA: 0.20 mm Ø DXV-1000 50 - 1000 40 38 PA: 0.30 mm Ø DXV-1500 150 - 1500 40 38 PA: 0.30 mm Ø DXV-2000 200 - 2000 40 38 PA: 0.50 mm ØOther tension ranges available on request. Other units of measure available, such as g.* Width of bracket assembly** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Available Models
MODEL
DXP-50 10 - 50 27 44 PA: 0.12 mm Ø DXP-120 20 - 120 27 44 PA: 0.12 mm Ø DXP-200 20 - 200 27 44 PA: 0.12 mm ØOther tension ranges available on request. Other units of measure available, such as g.* Width of bracket assembly** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Ranges
cN
DXE-400 + K + A – M = DXE – 400 – K – A – M
Special version
with measuring head
rotated by 90 º
Smallest measuring head possible –
only for textile applications !
fi g. 2: Measuring head, Model DXV fi g. 3: Measuring head, Model DXP
Model DXV-1500
Model DXP-120
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Measurin
g Head Width X*
approx.
mm
Measurin
g Head Length Y
approx.
mm
SCHMIDT
Calibration
Material** M
easuring Head W
idth X*
approx.
mm
Measurin
g Head Length Y
approx.
mm
SCHMIDT
Calibration
Material**
A
A 7
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, mechanicalDX Series
Model DXFSpecial purpose models feature largerollers to minimize bending of materials likefi ber optics, carbon and technical fi bersFragile fi laments such as fi ber optics and other technical fi bersmay require large roller diameters and a wide roller spacing.
Special features:
Large, V-grooved guide rollers with 32 mm groove diameter, ball-bearing mounted Large bending radius assures gentle handling of the material being measured Standard features same as Model DX2 Note: These models do not have a built-in material thickness compensatorSCHMIDT has the solution to any tension measuring problem !Please contact us to discuss yourapplication requirements.
Tensio
n Ranges
cN
Measurin
g
Head Width *
mm
SCHMIDT
Calibration M
aterial **
for fi ber optic cables and buffertubes up to 8 mm Ø max.
Model DXL-5000
Large guide rollers minimize
material defl ection
with plastic guiderollers (Code T)
Model DXF-120-T
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Subj
ect
to c
hang
e w
ithou
t no
tice.
Available Models
MODEL
DXF-120 20 - 120 140 PA: 0.12 mm Ø DXF-200 20 - 200 140 PA: 0.12 mm Ø DXF-400 20 - 400 140 PA: 0.20 mm Ø DXF-1000 50 - 1000 140 PA: 0.30 mm Ø
DXL-2000 200 - 2000 235 Buffer tube Ø 2.5 mm DXL-5000 400 - 5000 235 Buffer tube Ø 2.5 mm DXL-10 K 2.5 - 10 daN 288 Buffer tube Ø 2.5 mmOther tension ranges available on request. Other units of measure available, such as g.* Outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Guide Rollers see page F
Model DXF
V-grooved
Standard 4000 Hardcoated aluminium Code T 4000 Plastic (PVC) red (Same dimensions as standard roller)
Model DXL
V-grooved
Standard 4000 Hardened-steel roller
U-grooved
Code R 1 4000 Hardened-steel roller (radius R 5) Specifi cations same as Model DX2 (see page A 4)
Optional Accessories see page F
Code A Air damping (available for Models -400 to -5000)
Code M Memory pointer
Model DXF, DXL
A
A 8
c o n t r o l i n s t r u m e n t s
SCHMIDT · 1st IN TENSION METERS WORLDWIDE
stIN TENSIONMETERSWORLDWIDE1
Large reference frame
(15 x 17 cm)
for precise readings
Hand-Held, mechanicalDX Series
Model DXKTension meter for measuringwarp threads on weaving machines
Model DXK measures the warp thread tension while the weavingmachine is not running. We recommend always measuring thesame number of ends, such as 5 or 10 ends (repeat of pattern) oronly a single end at a time. During measurement make sure thatthe ends are not pulled or pressed out of their alignment.
Special features:
Width of the sensing pin 10 mm (34 mm optionally available) Reference frame assures a stable, perpendicular position Standard features same as Model DX2 – Note: This model does not have a built-in material thickness compensator.
Available Models
MODEL
DXK-300 20 - 300 DXK-1000 100 - 1000 DXK-2000 200 - 2000SCHMIDT calibration material textile ribbon. Other tension ranges availableon request. Other units of measure available, such as g.
Specifi cations same as Model DX2 (see page A 4)
Optional Accessories see page F
Code M Memory pointer
Tensio
n Ranges
cN
Mechanical tension meter with take-up wheel, for example for setting yarn tension devices and sewing machines
Model DXK-1000
Model MKM-400
Tensio
n Ranges
cN
Available Models
MODEL
MKM-50 10 - 50 MKM-100 10 - 100 MKM-400 50 - 400
Special features:
Motorized take-up fi xture to have a constant unwinding speed (v = 16 m /min) for unchanged measurement Handle can be reversed Accumulator operated Battery operation Weight, net (gross): approx. 650 g (1250 g)
Specifi cations
same as Model MK (see page B 2)
Model MKM
A
A 9
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, mechanicalDX Series
Model DXBCylindrical rollers pointingtoward the operator
Special purpose tension meter for measuringall kinds of tapes and bands, such as textileribbons, fi lms, foils, fi ber bunches, etc.
Special features:
Dual-fl anged outer guide rollers with various widths, from 7 mm to 100 mm (single-fl anged rollers optional) Special calibration is available Standard features same as Model DX2 – Note: This model does not include a fi lament guide and material thickness compensatorWhen selecting the instrument for your specifi capplication, please keep in mind that:1. Rollers of different widths are not interchangeable by the user2. The roller width should correspond with the width of the material to be measured. Otherwise incorrect measuring results may occur and the instrument may be damagedSCHMIDT has the solution to any tensionmeasuring problem ! Please contact us to discussyour application requirements.To assist you in selecting the right tension meterfor your specifi c application, please furnish:– Kind and dimensions of the material to be measured– Expected tension range– Material sample of about 5 m
Available Models
MODEL
DXB-50 10 - 50 55 7 DXB-120 20 - 120 55 7, 10, 15, 20, 30 DXB-200 20 - 200 55 7, 10, 15, 20, 30 DXB-400 20 - 400 55 7, 10, 15, 20, 30 DXB-1000 100 - 1000 55 7, 10, 15, 20, 30, 36, 41, 50 DXB-2000 200 - 2000 117 7, 10, 15, 20, 30, 36, 41, 50 DXB-5000 400 - 5000 117 7, 10, 15, 20, 30, 36, 41, 50 DXB-10 K 2.5 - 10 daN 117 7, 10, 15, 20, 30, 36, 41 DXB-20 K-L 5 - 20 daN 167 7, 10, 15, 20, 30Other tension ranges, measuring head widths, and material path calibrationsavailable on request. Other units of measure available – g or kg.* SCHMIDT calibration material textile ribbon or fi lm, depending on tension range and roller width** Outer distance between outside guide rollers
Tensio
n Ranges
cN
Roller
Widths
mm
Guide Rollers see page F
Standard 1000 Hardcoated aluminium (Exception: 7 mm rollers are made of nickel-plated steel)Other roller materials (nickel-plated steel or plastic), as well as special coatings (ceramic, anti-adhesive or carbon fi bres - NAV optimized) are available on request.
Optional Accessories see page F
Code A Air damping (available for Models -400 to -5000)
– not available for Model DXR – Code L Special lever (Standard for Models -20 K and higher)
– recommended for -10 K Models – Code M Memory pointer – not available for DXB-50 and DXT-50 –
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Specifi cations same as Model DX2 (see page A 4)
Models DXB, DXR, DXT
Version with 30 mm rollers
Model DXB-5000-30 Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Subj
ect
to c
hang
e w
ithou
t no
tice.
Measurin
g
Head Width **
mm
A
A 10
c o n t r o l i n s t r u m e n t s
Model DXRWith heavy-duty bracket andspecial roller support
Model DXTCylindrical rollers pointing awayfrom the operator
Available Models
MODEL
DXT-50 10 - 50 57 7 DXT-120 20 - 120 57 7, 10, 15, 20, 30 DXT-200 20 - 200 57 7, 10, 15, 20, 30 DXT-400 20 - 400 57 7, 10, 15, 20, 30 DXT-1000 100 - 1000 57 7, 10, 15, 20, 30, 36, 41, 50 DXT-2000 200 - 2000 117 7, 10, 15, 20, 30, 36, 41, 50 DXT-5000 400 - 5000 117 7, 10, 15, 20, 30, 36, 41, 50 DXT-10 K 2.5 - 10 daN 117 7, 10, 15, 20, 30 DXT-20 K-L 5 - 20 daN 117 7, 10, 15, 20Other tension ranges, measuring head widths, and material path calibrationsavailable on request. Other units of measure available – g or kg.* SCHMIDT calibration material textile ribbon or fi lm, depending on tension range and roller width** Outer distance between outside guide rollers
Tensio
n Ranges
cN
Roller
Widths
mm
Available Models
MODEL
DXR-2000 200 - 2000 125 50, 100 DXR-5000 400 - 5000 125 50, 100 DXR-10 K-L 2.5 - 10 daN 125 50, 100 DXR-20 K-L 5 - 20 daN 200 50, 100 DXR-30 K-L 5 - 30 daN 200 50, 100 DXR-50 K-L 5 - 50 daN 200 50, 100Other tension ranges and other measuring head widths available on request.Other units of measure available – g or kg.* SCHMIDT calibration material textile ribbon or fi lm, depending on tension range and roller width** Outer distance between outside guide rollers
Note: Standard equipmentof Models DXR-10 K to DXR-50 Kincludes special lever (Code L).
Tensio
n Ranges
cN
Roller
Widths
mm
DXB-1000 + 20 + A = DXB – 1000 – 20 – A
Version with 100 mm rollersand special lever (Code L) foreasy use at higher ranges
Model DXR-50 K-100-L
Version with 20 mm rollers
Model DXT-1000-20
Hand-Held, mechanicalDX Series
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Roller width in mm
Measurin
g
Head Width **
mm
Measurin
g
Head Width **
mm
A
A 11
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
DN 1-120 DN 1-200
DN 1-400 DN 1-1000
DN 1-2000 DN 1-3500
DN 1-5000 DN 1-8000 DN 1-10 K
DN 1-30 K DN 1-50 KDN 1-20 K
Hand-Held, mechanicalDN Series
Durable tension meters for a wide range ofapplications in the textile, fi ber and wire industries
DN SERIES12 Tension rangesfrom 20 - 120 cN to 5 - 50 daN
Special features:
Large, easy to read scale (54 mm Ø)Linearized scale provides a better readingShock-resistant movementBuilt-in material thickness compensator improves accuracy for changing diameters on DN1-1000 and higher rangesFilament guide and roller shifting mechanism ensure easy acquisition of the running material
Standard features:
Everything in operator’s view: – the guide rollers – the measured material – the readings Ball-bearing mounted, V-grooved guide rollers Each instrument is individually calibrated for highest accuracy Special calibration is available Rugged aluminium housing Inspection Certifi cate with calibration test report optionally available
For high tensions up
to 50 daN – large, easy
to read scale
Actual size
Model DN1-400
fi g. 2: Material thickness compen-sator with material sample inserted
SCHMIDT scales are manufac-tured according to the moststringent quality requirements.Printed scales are not used.Instead, each scale is individuallymarked for the instrument invol-ved. This ensures highest quality.Our special procedure makesit possible to provide tension meters fi ne tuned to a specifi c tension range, or calibrated to custom supplied material, or units of measure such as g or kg.
Subj
ect
to c
hang
e w
ithou
t no
tice.
fi g. 1:Adjustabledamping(Code A) toprovidesteady tensionreadings(see page E)
without dampingwith damping
A
A 12
c o n t r o l i n s t r u m e n t s
Hand-Held, mechanicalDN Series
Available Models
MODEL
DN 1-120 20 - 120 65 PA: 0.12 mm Ø DN 1-200 20 - 200 65 PA: 0.12 mm Ø DN 1-400 20 - 400 65 PA: 0.20 mm Ø DN 1-1000 50 - 1000 65 PA: 0.30 mm Ø
DN 1-2000 200 - 2000 116 PA: 0.50 mm Ø
DN 1-3500 400 - 3500 116 PA: 0.80 mm Ø
DN 1-5000 400 - 5000 116 PA: 0.80 mm Ø
DN 1-8000 500 - 8000 116 PA: 1.00 mm Ø
DN 1-10 K 2 - 10 daN 116 PA: 1.00 mm Ø
DN 1-20 K-L 5 - 20 daN 216*** PA: 1.50 mm Ø
DN 1-30 K-L 5 - 30 daN 265*** PA: 1.50 mm Ø DN 1-50 K-L 5 - 50 daN 265*** Steel rope: 1.50 mm Ø (7 x 7 x 0.20)Other tension ranges and measuring head widths available on request.Other units of measure available – g or kg.* Depending on model, either width of fi lament guide or outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament*** deviating measuring head width 285 mm with Code V 1
Specifi cations DN Series
Calibration: According to SCHMIDT factory procedure Accuracy: ±1 % full scale (FS) or ±1graduation on scale Scale diameter: 54 mm Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Housing material: Die-cast aluminium Housing dimensions: 220 x 74 x 42 mm (L x W x H) Weight, net (gross): up to DN 1-10 K approx. 700 g (1200 g) (approx.) DN 1-20 K-L and higher ranges 900 g (2200 g)
Model DN 1
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT-
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 2000 Hardcoated aluminium 1000 Model DN 1-30 K and DN 1-50 K Code K 3500 Hardcoated aluminium Code H 5000 Plasma-coated aluminium (not available for DN 1-30 K and DN 1-50 K)
Code T 1000 Plastic (POM) black Code W 1000 Nickel-plated steel Code ST 1000 Hardened steel Code B 1000 Tempered steel for tire cord Code CE 1 1000 Ceramic Code ASY 1000 Hardcoated aluminium Code ASYB 1000 Tempered steel for tire cord asymmetrical groove – Gauge without fi lament guide – Code V 1 1000 Hardcoated aluminium*
U-grooved
Code U 2000 Hardcoated aluminium
Optional Accessories see page F
Code A Air damping (Models DN 1-120 to DN 1-2000 only)
Code L Special lever (standard for DN 1-20 K and
higher ranges) – recommended for DN 1-10 K –
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
DN1-400 + ST + A = DN1 – 400 – ST – A
with guide rollers (Code V1) for better and safer handling of higher tensionand special lever for easy useat high ranges (Code L)
Model DN1-50 K-L-V1
Model DN1-2000-K
with special guide rollers for linespeeds up to vmax. 3500 m /min (Code K)
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Mater
ial
thickn
ess co
m-
pensator
included
*only for DN1-20K up to DN1-50K
B
B 1
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
WORLDWIDE
stIN TENSIONMETERSWORLDWIDEWORLDWIDE11
Specifi cations Q Series
Calibration: According to SCHMIDT factory procedure Accuracy: ±1 % full scale (FS) or ±1graduation on scale Scale diameter: 54 mm Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Housing material: Chill-cast aluminium Housing dimensions: 78 x 62 x 27 mm (L x W x H) Weight, net (gross): approx. 300 g (400 g)
Stationary, mechanical
Model QTension meter with large, easyto read scale (54 mm Ø)
Stationary tension metersfor continuous tensionmeasurement applications
Special features:
Easy online mounting with screws User-set MIN and MAX limits alert operator to out-of-tolerance conditions (This feature is not available for Model Q)Note: Stationary tension meters do not includea fi lament guide and material thickness compensator
Models Q, MK, DX2S
Available Models
MODEL
Q-10 2 - 10 65 PA: 0.12 mm Ø Q-20 2 - 20 65 PA: 0.12 mm Ø Q-30 3 - 30 65 PA: 0.12 mm Ø Q-50 5 - 50 65 PA: 0.12 mm Ø Q-100 10 - 100 65 PA: 0.12 mm Ø Q-200 20 - 200 65 PA: 0.12 mm Ø Q-300 20 - 300 65 PA: 0.20 mm Ø Q-500 50 - 500 85 PA: 0.20 mm Ø Q-1000 50 - 1000 85 PA: 0.30 mm ØOther tension ranges available on request. Other units of measure available, such as g.* Outer distance between outside guide rollers** SCHMIDT calibration material Polyamide Monofi lament PA (see chart on page 9)
Tensio
n Ranges
cN
Optional Accessories see page F
Models MK, DX2S
Code A Air damping MK: Model MK-100 and higher ranges DX2 S: Models DX2S-120 to -5000 only Code D Tension-detecting screw contacts Adjustable MIN and MAX contacts trigger a signal, as soon as MIN or MAX tension value is reached
Movement with
magnetic damping
Model Q-50 Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Subj
ect
to c
hang
e w
ithou
t no
tice.
Guide Rollers see page F
Models Q, MK
V-grooved
Standard 1000 Hardcoated aluminium Code T 1000 Plastic (POM) black Code W 1000 Nickel-plated steel (Model -100 and higher)
Model DX2 S
V-grooved
Standard 2000 Hardcoated aluminium Code K 3500 Hardcoated aluminum Code H 5000 Plasma-coated aluminium (for Model DX2S-120 and higher ranges)
Code T 1000 Plastic (POM) black Code W 1000 Nickel-plated steel Code ST 1000 Hardened steel Code B 1000 Tempered steel for tire cord Code CE 1 1000 Ceramic Code ASY 1000 Hardcoated aluminium Code ASYB 1000 Tempered steel for tire cord asymmetrical groove (for Model DX2S-120 and higher ranges)
U-grooved
Code U 2000 Hardcoated aluminum
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Measurin
g
Head Width*
mm SCHMIDT
Calibration M
aterial **
B
B 2
c o n t r o l i n s t r u m e n t s
max.24 V DC2 W
max.24 V DC2 W
max.24 V DC2 W
Specifi cations MK Series
Calibration: According to SCHMIDT factory procedure Accuracy: ±1 % full scale (FS) or ±1graduation on scale Scale diameter: 41 mm Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Housing material: Plastic (Makrolon) Housing dimensions: 96 x 44 x 23 mm (L x W x H) Weight, net (gross): approx. 80 g (200 g)
Specifi cations same as Model DX2 (see page A 4)
The following models of the DX series are available as stationary models for fi xed installation: Model DXE Model DXES Model DXF Model DXFS Model DXB Model DXBS Model DXT Model DXTS
Stationary, mechanical
Model MKSmall, compact and easy to installmeasuring instrument
Model DX2SVersatile tension meter for manyindustrial applications
Available Models
MODEL
DX2S-50 10 - 50 54 PA: 0.12 mm Ø DX2S-120 20 - 120 54 PA: 0.12 mm Ø DX2S-200 20 - 200 54 PA: 0.12 mm Ø DX2S-400 20 - 400 54 PA: 0.20 mm Ø DX2S-1000 50 - 1000 54 PA: 0.30 mm Ø DX2S-2000 200 - 2000 116 PA: 0.50 mm Ø DX2S-5000 400 - 5000 116 PA: 0.80 mm Ø DX2S-8000 1000 - 8000 116 PA: 1.00 mm Ø DX2S-10 K 2.5 - 10 daN 116 PA: 1.00 mm Ø DX2S-20 K 5 - 20 daN 216 PA: 1.50 mm ØOther tension ranges, measuring head widths, and material pathcalibrations available on request. Other units of measure available – g or kg.* Outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial **
Tensio
n Ranges
cN
DX2 S-400 + K + A = DX2S – 400 – K – A
Economical unit for
low tension ranges
Model MK-400
Model DX2S-400
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Available Models
MODEL
MK-12 3 - 12 56 PA: 0.12 mm Ø MK-20 5 - 20 56 PA: 0.12 mm Ø MK-30 5 - 30 56 PA: 0.12 mm Ø MK-50 10 - 50 56 PA: 0.12 mm Ø MK-100 10 - 100 56 PA: 0.12 mm Ø MK-250 20 - 250 56 PA: 0.12 mm Ø MK-300 20 - 300 56 PA: 0.20 mm Ø MK-400 50 - 400 56 PA: 0.20 mm ØOther tension ranges available on request. Other units of measure available, such as g.SCHMIDT calibration material Polyamide Monofi lament PA (see chart on page 9)
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial **
C
C 1
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicPT Series
Economical low tension measuring instruments for checking fi bers, threads, yarns etc.
Model PT-100
PT SERIESTension rangefrom 0.5 - 100 cN
Measurin
g Range
Tensio
n
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Actual size
Model PT-100
Guide Rollers see page F
V-grooved
Standard 2000 Hardcoated aluminium
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Subj
ect
to c
hang
e w
ithou
t no
tice.
For fast measurings on
circular knitting machines
Available Models
MODEL
PT-100 0.5 - 100.0 --- --- 24 PA: 0.12 mm Ø PT-100-L 0.5 - 100.0 0 - 1999 0 - 1999 24 PA: 0.12 mm Ø* Outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Special featuresModel PT-100 and PT-100-L:
Easy threading of the material to be measured using the cone shaped guide rollers and turning the instru- ment by 180°Automatic »Zero setting« independent to measuring position Tension meter can be used for right and left hand useAdjustable electronic damping to provide steady tension readings Switchable measuring units cN or grsDisplay of the average after fi nishing the measurementLiPo accumulator
Standard features Tension meter with small, compact aluminium housing Ball-bearing mounted, V-grooved guide rollers Tension meter with easy to read LCD display CE proofed, interference resistance about static charge Inspection Certifi cate with calibra- tion report optionally available
Measurin
g Range
Speed
m/min
Measurin
g Range
Lenght
m
fi g. 1: To thread the material the instrument has to be turned by 180°
C
C 2
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
3 1IN
Hand-Held, electronicPT Series
Model PT-100-L
Hand tension meter
with low wight
Specifi cations Model PT-100 and PT-100-L
Calibration: SCHMIDT factory procedure Accuracy: ± 1.5 % FS* and ± 1 digit, Length measuring ± 0.5 % FS*; 1 digit Overrange (approx.): 10% FS*, without accuracy guarantee Overload protection: 200 % Measuring principle: Strain gauge bridge Measuring units: cN, grs switchable m, in, m/min, in/min (only PT-100-L) Display update rate: 2 times / sec Damping: Selectable electronic damping (moving averaging) Display: LCD 3 ½ digits, 9 mm high Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Power supply: LiPo accumulator (~ 40 h continous use, charging time 3½ h) and AC adapter 100 - 240 V with adapters (EU/USA/UK) Auto power off: Automatically after 3 minutes of non use Housing material: Aluminium Housing dimensions: 141 x 36 x 22 mm (L x W x H) Weight, net (gross): approx. 170 g (approx. 500 g)
* FS = Full Scale
Actual size
Model PT-100-L
Tension meter mostly used for the knitting machines
Accessories Model PT-100-L
PT-S Sensor with cable and Magnet (only PT-100-L)
Special Features Model PT-100-L:
Multifunctional instrument:− Tension Meter− Yarn speed meter− Length to determine the yarn consumption of a single feeder for one or more (max. 10 revo- lutions) machine cycles of a circular knitting machine
Length measurement - 2 operation modes:− „Manual“ (without external Sensor): The instrument works as long as the operator presses the button− „Auto“ (with magnet sensor): Sensor and magnet are supplying a start/stop signal for a user-defi ned number of machine revolutions (1 to 10)
• Tension Meter• Yarn Speed Meter• Yarn Consumption Meter
with sensor for measuring yarn consumption
C
C 3
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicZE Series
Economical low tension measuring instrumentsfor checking fi bers, yarns and fi ne wires
Model ZEF
ZE SERIES4 Tension rangesfrom 0.5 - 100 cN to 1- 500 cN
Special features:
Simple handlingAutomatic »Zero setting« independent to measuring positionAdjustable electronic damping to provide steady tension readingsEasy to read LCD displayFilament guide and roller shifting mechanism ensure easy acquisition of the running materialLight weightLiPo accumulator
Standard features:
Everything in operator’s view: – the guide rollers – the measuring material – the readings Ball-bearing mounted, V-grooved guide rollers Housing made of high-strength plastic Inspection Certifi cate with calibration report optionally available
Available Models
MODEL
ZEF-50 0.5 - 50.0 43 PA: 0.12 mm Ø ZEF-100 0.5 - 100.0 43 PA: 0.12 mm Ø ZEF-200 1 - 200 43 PA: 0.12 mm Ø* Width of fi lament guide** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 900 Hardcoated aluminium Code K 2000 Hardcoated aluminum Code T 450 Plastic (POM) black Code W 450 Nickel-plated steel
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Actual size
Model ZEF-100
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Subj
ect
to c
hang
e w
ithou
t no
tice.
Slim fi lament guide
with small guide
rollers – ideal for limited
access space
fi g. 1: Model ZEF-100-T with easy running plasticrollers to measure Spandex (Lycra) fi laments
C
C 4
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
Hand-Held, electronicZE Series
Model ZED
ZEF-200 + K = ZEF – 200 – K
With bigger rollers
for universal use
Specifi cations Model ZEF and ZED
Calibration: SCHMIDT factory procedure Accuracy: ± 1 % FS* and ± 1 digit, typical ± 0.5 % FS* Overrange (approx.): 10 % FS*, without accuracy guarantee Overload protection: 100 % Measuring principle: Strain gauge bridge Measuring roller defl ection: 0.5 mm max. Display: 3-digit LCD, 10 mm high Model ZEF-50,ZEF -100: 3½-digit LCD Display update rate: 2 times / sec Damping: Selectable electronic damping (moving averaging) Signal processing: digital Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Power supply: LiPo accumulator (about 80 h continous use, charging time approx. 3 ½ h) and AC Adapter with adapters (EU/USA/UK) Housing material: Plastic (POM) Housing dimensions: 157 x 85 x 32 mm (L x W x H) Weight, net (gross): approx. 200 g (600 g)
* FS = Full Scale
Available Model
MODEL
ZED-200 1 - 200 63 PA: 0.20 mm Ø ZED-500 1 - 500 63 PA: 0.20 mm Ø* Width of fi lament guide** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Range
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 2000 Hardcoated aluminium Code K 3500 Hardcoated aluminium Code H 5000 Plasma-coated aluminium Code T 450 Plastic (POM) black Code W 450 Nickel-plated steel
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Actual size
Model ZED-500
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Universal tension meter for a variety of applicationsin the textile and wire industries
C
C 5
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Special featuresModels DTMB and DTMX:
Microprocessor controlled for highest accuracyReliable strain gauge measuring principleSelectable update rates (0.5 – 1 –2 or 4 seconds) to provide steady readings when tensions fl uctuate (electronic damping)Measuring frequency: 62 measurements / second
The display shows averaged values calculated during the up- date interval t1Recall of measured MIN, MAX and PEAK values
Zero adjustment feature permits use of the tension meter in various measuring positions, maintaining highest accuracyCalibration to customer supplied material is available (up to two different material calibrations)Built-in material thickness compensator improves accuracy for changing diameters on Models -500 cN and higher rangesBuilt-in mounting holes permit fi xed installation for online use
Standard Model DTMB and Model DTMX
Hand-Held, electronicDT Series
Electronic tension meters providing detailed process dataand analysis. Available in two models: DTMB and DTMX
DT SERIES
Model DTMB:
The basic unit for easy use,
for many applications
fi g. 1: Field adjustment functionfor fi ne tuning of the calibrationfor materials which differ fromfactory standard calibration material; the displayed value can be increasedor decreased in ± 1.5 % increments
Model DTMB
t1 t1 t1 t1
* Averaged values
F
PEAK
MAX*last value*
MIN *
Actual size with specialhigh speed guide rollersfor line speeds up tovmax. 5000 m /min (Code H)
Model DTMB-1000-H
Subj
ect
to c
hang
e w
ithou
t no
tice.
9 Tension rangesfrom 0 - 200 cN to 5- 50 daN
Standard featuresModels DTMB and DTMX:
Everything in operator’s view: – the guide rollers – the measured material – the readings Filament guide and roller shifting mechanism ensure easy acquisition of the running material Ball-bearing mounted, V-grooved guide rollers Rugged aluminium housing Battery operated (AC adapter for continuous operation available) CE approved (tested for electromagnetic compatibility) Inspection Certifi cate with calibration report optionally available
C
C 6
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicDT Series
Model DTMX For applications requiring additional process data,such as ISO 9000 certifi ed quality management systems
Additonal features model DTMX:
Memory for up to 100 tension values plus MIN, MAX, PEAK values;– automatic calculation of average and standard deviation;– all these data values can be recalled in the display or downloaded to a printer or Personal Computer.2 Memory modes: Continuous storage or on-demand storageAnalog and serial interfacesMaterial selector switch for textile and wire applications (Tex and Wire) assures highest accuracyCalibration to customer supplied material is available (up to four different material calibrations)
Standard Model DTMB and Model DTMX
fi g. 3: DIP switches for operator settings, such as up- date rates, memory mode, etc.
fi g. 2: Easy mounting for online application, built-in materialthickness compensator with material sample inserted
fi g. 4: Model DTMX provides detailed process data and analysis (for software see page C 9)
Actual size
Model DTMX-200
The DTMX model also provides:
– Built-in Data Logger
– Statistical evaluation
– Interfaces for data printer and
PC connection
C
C 7
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial
Hand-Held, electronicDT Series
Specifi cations DTMB and DTMX
Calibration: According to SCHMIDT factory procedure Accuracy: 10 % to 90 % of range: ± 0.5 % FS* and ± 1 digit Remaining range and other calibration material: ± 3 % FS* and ± 1 digit or better Overrange (approx.): 15% FS*, without accuracy guarantee Overload protection: 100 % Measuring principle: Strain gauge bridge Measuring roller defl ection: 0.2 mm max. Signal processing: Digital Measuring frequency: 62 measurements / sec Converter: 12 bit A / D Display: 4-digit LCD, 12 mm high Display update rate: 0.5 – 1 – 2 or 4 seconds selectable Memory: Last, MIN, MAX, PEAK values Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Power supply: 4 size AA batteries 1.5 V (about 20 hours of continuous use) Housing material: Die-cast aluminium Housing dimensions: 235 x 76 x 45 mm (L x W x H) Weight, net (gross): Up to Model -10 K 680 g (1500 g) (approx.) Model -20 K-L and higher 1000 g (2200 g)
* FS = Full Scale
Model DTMB
Optional Accessories Model DTMB see page F
Code L Special lever (standard for DTMB -20 K and DTMX-50 K)
– recommended for DTMB-10 K –
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Available Models
MODEL
DTMB-200 0.1 - 200.0 65 0.12 mm Ø max. 200 tex max. 0.15 mm Ø DTMB-500 0.1 - 500.0 65 0.12 + 0.20 mm Ø 20 - 500 tex 0.05 - 0.25 mm Ø
DTMB-1000 50 - 1000 65 0.20 + 0.40 mm Ø 50 - 1000 tex 0.10 - 0.40 mm Ø
DTMB-2000 200 - 2000 65 0.40 + 0.70 mm Ø 300 - 2000 tex 0.30 - 0.60 mm Ø
DTMB-2500 250 - 2500 116 0.40 + 0.70 mm Ø 400 - 2500 tex 0.30 - 0.60 mm Ø
DTMB-5000 500 - 5000 116 0.60 + 1.20 mm Ø 800 - 5000 tex 0.40 - 1.00 mm Ø
DTMB-10 K 1.00 - 10.00 daN 116 0.80 + 1.40 mm Ø 1500 - 10000 tex 0.70 - 1.20 mm Ø
DTMB-20 K-L 2.00 - 20.00 daN 216*** 1.20 + 1.80 mm Ø 2500 - 20000 tex 1.00 - 1.70 mm Ø
DTMB-50 K-L 5.00 - 50.00 daN 216*** Steel rope 1.5 mm Ø 6000 - 50000 tex 1.40 - 2.00 mm Ø (7 x 7 x 0.2)Other measuring head widths * Depending on model, either width of fi lament guideavailable on request. Other units or outer distance between outside guide rollersof measure available – g or kg. ** Suitable for 95 % of applications (see also chart on page 9) *** deviating measuring head width 285 mm with Code V 1
Tensio
n Ranges
cN
Measurin
g Head
Width*
mm
SCHMIDT
Calibration M
aterial**
Polyamid (PA
)-Monofi l
Textile
Industry
Applicatio
ns
e.g. ya
rn count
Wire
Industry
Applicatio
ns
e.g. so
ft-annealed
copper w
ire
Additional Equipment Model DTMB
DTM-AC AC adapter 100 V DC - 240 V AC, 50 - 60 Hz with adapters (EU, USA, UK)
Subj
ect
to c
hang
e w
ithou
t no
tice.
Mater
ial
thickn
ess
compensator
included
Guide Rollers see page F
Model DTMB
V-grooved
Standard 2000 Hardcoated aluminium Code K 3500 Hardcoated aluminium Code H 5000 Plasma-coated aluminium Code T 1000 Plastic (POM) black Code W 1000 Nickel-plated steel Code ST 1000 Hardened steel Code B 1000 Tempered steel for tire cord Code CE 1 1000 Ceramic Code ASY 1000 Hardcoated aluminum Code ASYB 1000 Tempered steel for tire cord asymmetrical groove – Gauge is without fi lament guide – Code V 1 1000 Hardcoated aluminium (only for ranges 20 daN and higher)
U-grooved
Code U 2000 Hardcoated aluminium
with guide rollers (Code V1) forbetter and safer handling of highertension and special lever for easyuse at high ranges (Code L)
Model DTMX -50 K-L-V1
C
C 8
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
Hand-Held, electronicDT Series
Additional Equipment Model DTMX
DTM-AC AC adapter 100 - 240 V AC, 50 - 60 Hz with 3 adapters (EU, USA, UK) battery powered, charger for 115 V AC DTMX-P-230 Data printer with RS 232, rechargeable battery powered, charger for 230 V AC DTMX-CA Connecting cable for analog signal (1.5 m long) DTMX-CP Connecting cable for printer RS 232 (2 m long) DTMX-CC Connecting cable for PC RS 232 (2 m long) DTMX-P2 »Tension View« software (WIN’95 and higher)
Specifi cations same as Model DTMB, additional:
Extended memory: up to 100 tension values, average, standard deviation Digital output: RS 232 C (4800, 8, N, 2) Analog output: 0 - 1 V DC (conversion rate 16 ms) Digimatic: Mitutoyo
Model DTMX
Available Models
MODEL
DTMX-200 0.1 - 200.0 65 0.12 mm Ø max. 200 tex 0.10 mm Ø max. 0.15 mm Ø DTMX-500 0.1 - 500.0 65 0.12 + 0.20 mm Ø 20 - 500 tex 0.16 + 0.25 mm Ø 0.05 - 0.25 mm Ø
DTMX-1000 50 - 1000 65 0.20 + 0.40 mm Ø 50 - 1000 tex 0.25 + 0.40 mm Ø 0.10 - 0.40 mm Ø
DTMX-2000 200 - 2000 65 0.40 + 0.70 mm Ø 300 - 2000 tex 0.40 + 0.60 mm Ø 0.30 - 0.60 mm Ø
DTMX-2500 250 - 2500 116 0.40 + 0.70 mm Ø 400 - 2500 tex 0.40 + 0.60 mm Ø 0.30 - 0.60 mm Ø
DTMX-5000 500 - 5000 116 0.60 + 1.20 mm Ø 800 - 5000 tex 0.60 + 1.00 mm Ø 0.40 - 1.00 mm Ø
DTMX-10 K 1.00 - 10.00 daN 116 0.80 + 1.40 mm Ø 1500 - 10000 tex 0.70 + 1.20 mm Ø 0.70 - 1.20 mm Ø
DTMX-20 K-L 2.00 - 20.00 daN 216**** 1.20 + 1.80 mm Ø 2500 - 20000 tex Steel rope 1.5 mm Ø 1.00 - 2.00 mm Ø
Steel rope 2.0 mm Ø DTMX-50 K-L 5.00 - 50.00 daN 216**** Steel rope 1.5 mm Ø 6000 - 50000 tex Steel rope 2.0 mm Ø 1.80 - 2.20 mm Ø (7 x 7 x 0.2) (7 x 7 x 0.25)Other measuring head widths * Depending on model, either width of fi lament guide or outer distance between outside guide rollersavailable on request. Other units ** Suitable for 95 % of applications (see also chart on page 9) – PA = Polyamide Monofi lamentof measure available – g or kg. *** Accuracy: ± 3 % Full Scale (FS) and ± 1 dgit **** deviating measuring head width 285 mm with Code V 1
Tensio
n Ranges
cN
Measurin
g Head
Width*
mm
SCHMIDT Calibratio
n Mater
ial**
Position Te
x
Polyamid (PA
)-Monofi l
Textile
Industry
Applicatio
ns
e.g. ya
rn count
SCHMIDT Calibratio
n Mater
ial***
Position W
ire
Soft-annealed
copper w
ire
Wire
Industry
Applicatio
ns
e.g. so
ft-annealed
copper w
ire
Optional Accessories Model DTMX see page F
Code L Special lever – recommended for DTMX-10 K – (standard for DTMX-20 K and DTMX-50 K)
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Guide Rollers same as Model DTMB
DTMX-5000 + H + L = DTMX – 5000 – H – L
fi g. 1: Connecting cable analog, printer and PC, AC adapter
Model DTMB-10 K
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Mater
ial
thickn
ess
compensator
included
C
C 9
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicDT Series
Model DTMX for Storing and Analyzingthe Measured Data
The stored tension values and statisticaldata can be recalled to the DTMX displaywhenever they are desired.
All stored data can be downloaded over the serial inter-face to a printer (optionally available) or to a Personal Computer.The data printout is ideal for ISO 9000 quality reports.
You can downloadsingle tension values overthe serial interface toa PC. For this purpose,the DTMX supportsseveral communicationsprograms, such asWindows terminal.
The DTMX can be mounted online for continuous tension monitoring.It can be connected to a PC using the RS 232 output.Using the programm »Tension View« following basic functions are available: Real time tension display Graphical X-Y chart (reading no. – tension value) Long time recording using operator set time span and sampling time Analyzing and printing of all stored data (graphs and numeric reports)
The DTMX tension meterprovides a 0 - 1 V DC analogoutput that can be connected toa line recorder. This permitscontinuous data analysis overlonger periods of time.
A Poll Command: B Software (optional equipment): C Grafi c Presentation:
BA
Continuous online data acquisition and analysis:
Subj
ect
to c
hang
e w
ithou
t no
tice.
»Tension View« (WIN’95 and higher) to connect the DTMXto a PC; all datas are stored in an EXCEL fi le (.xls).
Versatile and state-of-the-art: The DTMX model can be used as a data logger forup to 100 measured values. You can choose between two memory modes:
1. Continuous Mode: The STORE key starts continuous datalogging of up to 100 tension values.
2. On-Demand Mode: A tension value is stored each time the STORE key is pressed.
From the measured data, the DTMX automatically calculates maximum, minimum, average, and standarddeviation values. The stored data are retained in memory even after the tension meter is turned off.
stIN TENSIONMETERSWORLDWIDE1
Please ask for
additional
information !
C
C 10
c o n t r o l i n s t r u m e n t s
Hand-Held, electronicDT Series
Models DTEB, DTEXSpecial purpose models feature smallmeasuring heads, where access space is limitedor where fi laments run close together
Available Models
MODEL
DTEB-200 DTEX-200 2.0 - 200.0 38 PA: 0.12 mm Ø DTEB-500 DTEX-500 5.0 - 500.0 38 PA: 0.20 mm Ø DTEB-1000 DTEX-1000 50 - 1000 36 PA: 0.30 mm Ø DTEB-2000 DTEX-2000 200 - 2000 36 PA: 0.50 mm Ø
DTVB-200 DTVX-200 2.0 - 200.0 40 PA: 0.12 mm Ø DTVB-500 DTVX-500 5.0 - 500.0 40 PA: 0.20 mm Ø DTVB-1000 DTVX-1000 50 - 1000 40 PA: 0.30 mm Ø DTVB-2000 DTVX-2000 200 - 2000 40 PA: 0.50 mm ØOther units of measure available, such as g.* Width of bracket assembly** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT Calibratio
n
Material**
Guide Rollers see page F
V-grooved
Standard 900 Hardcoated aluminium Code K 2000 Hardcoated aluminium Code T 450 Plastic (POM) black Code W 450 Nickel-plated steel
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
These tension meters are recommended where the standardModels DTMB and DTMX cannot be used.
Special features:
Turned-up outer fi nger edges guide the running fi lament into the roller grooves Length of measuring head approx. 59 mm Small, ball-bearing mounted, V-grooved guide rollers SCHMIDT calibration with Polyamide Monofi lament (PA) Special calibration using customer supplied samples is available Standard features same as Model DTMB and DTMX respectively Note: The below models do not include a material thickness compensator
Additional Equipment · Specifi cations same as DTMB or DTMX (see page C 7)
Models DTVB, DTVX
Models DTEB, DTEX, DTVB, DTVX
DTEX-2000 + T = DTEX – 2000 – T
Model DTVB-500
with special guide rollersfor line speeds up tovmax. 2000 m /min (Code K)
Model DTEB-500-K
Measuring head
rotated by 90º
Ideal for applications
with limited access space
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
Line S
peed
vmax. ...
m / min
Roller
Mater
ial
C
C 11
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicDT Series
Models DTFB, DTFX
Available Models
MODEL
DTFB-200 DTFX-200 2.0 - 200.0 140 PA: 0.12 mm Ø DTFB-500 DTFX-500 5.0 - 500.0 140 PA: 0.20 mm Ø DTFB-1000 DTFX-1000 50 - 1000 140 PA: 0.30 mm Ø
DTLB-2000 DTLX-2000 200 - 2000 185 Ø 2.6 mm*** DTLB-5000 DTLX-5000 400 - 5000 235 Ø 3.4 mm*** DTLB-10 K DTLX-10 K 1.00 - 10.00 daN 235 Ø 3.4 mm***Other units of measure available, such as g.* Outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament*** Cu wire with insulation
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Additional Equipment · Specifi cations same as DTMB or DTMX (see page C 7)
Models DTFB, DTFX, DTLB, DTLX
Large guide rollers
minimize material
defl ection
Model DTFX-1000
Subj
ect
to c
hang
e w
ithou
t no
tice.
Special purpose models feature largerollers to minimize bending of materials likefi ber optics, carbon and technical fi bers
Special features:
Large, V-grooved guide rollers with 32 mm groove diameter, ball-bearing mounted Large bending radius assures gentle handling of the material being measured Special guides on the bracket assembly permit easy material acquisition Standard features same as Models DTMB respectively DTMX Note: These models do not have a built-in material thickness compensator
Fragile fi laments such as fi ber optics and other technical fi bersmay require large roller diameters and a wide roller spacing.
for fi bre opticcables and buffertubes up to8 mm Ø max.
Model DTLB-10 K-L
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial Guide Rollers see page F
DTFB, DTFX
V-grooved
Standard 4000 Hardcoated aluminium Code T 4000 Plastic (PVC) red (Same dimensions as standard roller)
DTLB, DTLX
V-grooved
Standard 4000 Hardened-steel roller
U-grooved
Code R 1 4000 Hardened-steel roller (radius R 5)
C
C 12
c o n t r o l i n s t r u m e n t s
Hand-Held, electronicDT Series
Models DTBB, DTBX
Available Models
MODEL
DTBB-200 2.0 - 200.0 55 7, 10, 15, 20, 30 DTBB-500 5.0 - 500.0 55 7, 10, 15, 20, 30 DTBB-1000 50 - 1000 55 7, 10, 15, 20, 30 DTBB-2000 200 - 2000 55 7, 10, 15, 20, 30 DTBB-2500 250 - 2500 117 7, 10, 15, 20, 30 DTBB-5000 500 - 5000 117 7, 10, 15, 20, 30 DTBB-10 K 1.00 - 10.00 daN 117 7, 10, 15, 20 DTBB-20 K-L 2.00 - 20.00 daN 217 7, 10, 15 DTBB-50 K-L 5.00 - 50.00 daN 217 7, 10
DTBX-200 2.0 - 200.0 55 7, 10, 15, 20, 30 DTBX-500 5.0 - 500.0 55 7, 10, 15, 20, 30 DTBX-1000 50 - 1000 55 7, 10, 15, 20, 30 DTBX-2000 200 - 2000 55 7, 10, 15, 20, 30 DTBX-2500 250 - 2500 117 7, 10, 15, 20, 30 DTBX-5000 500 - 5000 117 7, 10, 15, 20, 30 DTBX-10 K 1.00 - 10.00 daN 117 7, 10, 15, 20 DTBX-20 K-L 2.00 - 20.00 daN 217 7, 10, 15 DTBX-50 K-L 5.00 - 50.00 daN 217 7, 10Other measuring head widths available on request.Other units of measure available – g or kg.* SCHMIDT calibration material textile ribbon or fi lm, depending on tension range and roller width** Outer distance between outside guide rollers
Tensio
n Ranges
cN
Measurin
g
Head Width**
mm
Roller
Widths
mm
Guide Rollers see page F
Standard 1000 Hardcoated aluminium (Exception: 7 mm rollers are made of nickel-plated steel)Other roller materials (nickel-plated steel or plastic), as well as special coatings (ceramic, anti adhesive or carbon fi bres - NAV optimized) are available on request.
Optional Accessories see page F
Code L Special lever (standard for Models -20 K and -50 K)
– recommended for -10 K Models –
Models DTBB, DTBX
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Additional Equipment · Specifi cations same as DTMB or DTMX (see page C 7)
DTBB-10 K + 10 + L = DTBB – 10 K – 10 – L
Version with 20 mm rollers
Model DTBB-5000-20
With cylindrical
rollers pointing
toward the
operator
Code for a
ccesso
ry
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Roller width in mm
Li
ne Speed
vmax. ...
m / min
Special purpose tension meters for measuringall kinds of tapes and bands, such as textileribbon, fi lms, foils, fi ber bunches, etc.
Special features:
Dual-fl anged outer guide rollers with various widths, from 7 mm to 20 mm (single-fl anged rollers optional) Custom-built confi gurations and special calibration are available Standard features same as Models DTMB respectively DTMX Note: These models do not include a fi lament guide and material thickness compensatorWhen selecting the instrument for your specifi capplication, please keep in mind that:1. Rollers of different widths are not interchangeable by the user2. The roller width should correspond with the width of the material to be measured. Otherwise incorrect measuring results may occur and the instrument may be damagedTo assist you in selecting the right tension meterfor your specifi c application, please furnish:– Kind and dimensions of the material to be measured– Expected tension range– Material sample of about 5 m
Roller
Mater
ial
C
C 13
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicET Series
Electronic tension meters for hard to reach andlimited access space applications. Available in two models:ETB (Basic unit) and ETX (with memory and output)
ET SERIES3 Tension rangesfrom 0.5 - 100 cN to 1 - 500 cN
Smallest measuring head – only for
textile applications and copper wire,
soft-annealed (max. 0.17 mm Ø)
fi g. 1: Model ETPB with ceramic pins for line speeds up to vmax. 6000 m /min
Actual size
Model ETB-200
Subj
ect
to c
hang
e w
ithou
t no
tice.
Models ETPB and ETPX
Special features Models ETX and ETPX
USB interfaces for connection to a PCMemory of max. 4000 tension values split up to 255 series of measurements and statistics (Last, AVG, MIN, MAX, MIN Peak and MAX Peak )4 different memory modes:− Mode S: only statistics− Mode L: statistics plus 10 displayed values of each series of measurements− Mode C: statistics plus 4000 displayed values split up to 255 series− Mode F: as L plus higher sampling rate of 100 HzDelivery includes: tension meter, connecting cable for PC and Software »Tension Inspect«
Standard features:
Models ETB and ETX with ball-bearing mounted, V-grooved guide rollers for line speeds up to vmax. 2000 m / min Models ETPB and ETPX with ceramic pins for line speeds up to vmax. 6000 m / min Automatic »Zero setting« independent to measuring position Storage of AVG, MIN, MAX and PEAK tension values which can be recalled in the display Adjustable electronic damping for better reading when tension is constantly changing The display can be background lightened for better reading if necessary Changeable units cN and g Display update time 0.5 sec LiPo accumulator CE approved (tested for electromagnetic compatibility) Inspection Certifi cate with calibration report optionally available Display can be reversed for right and left hand use
MEMORY MODE LPos : 1 Pos : 2 Pos : 3
AVG : 12.0 AVG : 16.3 AVG : 17.2
Last : 22.1 Last : 12.8 Last : 15.1
MAX : 22.1 MAX : 22.9 MAX : 22.7
MIN : 5.4 MIN : 12.3 MIN : 13.8
MAXPEAK : 28.1 MAXPEAK : 26.5 MAXPEAK : 26.3
MINPEAK : 1.8 MINPEAK : 10.5 MINPEAK : 10.9
Values : 10 Values : 10 Values : 10
10.8
14.2 14.1
10.0
19.4 19.0
7.3
22.9 22.7
6.1
17.3 18.9
5.4
12.3 14.3
9.2
13.4 16.8
13.4
17.0 18.4
17.4
19.5 19.8
19.0
15.1 13.8
22.1
12.8 15.1
MAX : 22.1 MAX : 22.9 MAX : 22.7
MIN : 5.4 MIN : 12.3 MIN : 13.8
C
C 14
c o n t r o l i n s t r u m e n t s
Hand-Held, electronicET Series
Model ETWith ball-bearing mounted,
V-grooved guide rollers
Model ETP
Available Models
MODEL
ETB-100 ETX-100 0.5 - 100.0 24 PA: 0.20 mm Ø ETB-200 ETX-200 1 - 200 24 PA: 0.20 mm Ø ETB-500 ETX-500 1 - 500 24 PA: 0.20 mm Ø* Outer distance between outside guide rollers** Suitable for 95 % of applications PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT Calibratio
n**
with ru
nning fi lament
approx. 100 m / m
in
Guide Rollers see page F
V-grooved
Standard 2000 Aluminium, hard chromed
Specifi cations Models ETB, ETPB, ETX, ETPX
Calibration: According to SCHMIDT factory procedure Accuracy: ± 1 % FS* and ± 1 digit, typical ± 0.5 % FS* Units: cN or g Overrange (approx.): 10 % FS*, without accuracy guarantee Overload protection: 200 % Measuring principle: Strain gauge bridge Measuring roller defl ection: 0.5 mm max. Signal processing: Digital, 24 bit A / D converter Damping: adjustable electronic damping (Moving averaging) Sampling rate: approx. 1 kHz (Internal only) Display update time: approx. 2 times / sec Display: LCD 4 digit, 11 mm high (back-lit) Memory: Last, Average, MAX, MIN, MAX Peak , MIN Peak Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Power supply: LiPo accumulator (60 h continuous use charging time 3 ½ h ) and mains adap- ter 100 - 240 V AC, adapters (EU,US,UK) Housing material: Aluminium frame profi le with plastic outer casing (PVC) Housing dimensions: 197 x 58 x 47 mm (L x W x H) Weight, net (gross): approx. 340 g (1250 g)* FS = Full Scale
Available Models
MODEL
ETPB-100 ETPX-100 0.5 - 100.0 22 PA: 0.20 mm Ø ETPB-200 ETPX-200 1 - 200 22 PA: 0.20 mm Ø ETPB-500 ETPX-500 1 - 500 22 PA: 0.20 mm Ø* Outer distance between outside guide pins** Suitable for 95 % of applications PA = Polyamide Monofi lament
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT Calibratio
n**
with ru
nning fi lament
approx. 60 m / m
in
Guide Pins see page F
V-grooved
Standard 6000 AL-Oxide ceramic
With ceramic pins for line
speeds up to vmax. 6000 m /min
Li
ne Speed
vmax. ...
m / min
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial Pin M
aterial
fi g. 3:Models ETX and ETPX series can be connectedto PC for monitoringor downloadingstored data
Please ask for
additional information ! Models ETX and ETPX additonal:
Output signal digital: USB Memory: max. 4000 values Communication frequency: max. 100 readings / sec
ETB-200 + A4 = ETB-200-A4To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for a
ccesso
ry
Complete Order N
o.
fi g. 2:Filament guide for easy material acquisition of running fi laments;
The two outer rollers can be tilted upwards using the lever on the rear side. If required, the fi lament guide can be unscrewed.
C
C 15
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicMST and KXE Series
Tension meter for measuring the tension on weaving machines
Available Models
MODEL
KXE-20 K 0.50 - 20.00 fabric tape KXE-50 K 0.5 - 50.0 fabric tape * Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model KXE
Tensio
n Ranges
daN SCHMIDT
Calibration M
aterial*
2 Tension ranges from 0.50 - 20 daN to 0.5 - 50.00 daN
Tension meter for measuring and adjusting the tension of sewing machines and yarn breaks
Available Models
MODEL
MST-500 1 - 500 PA: 0.20 mm Ø MST-1000 1- 1000 PA: 0.30 mm Ø MST-2000 1 - 2000 PA: 0.50 mm Ø* Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model MST
Tensio
n Ranges
cN
3 Tension ranges from 1 - 500 cN to 1 - 2000 cN
KXE special features:
Hand measuring head with 100 mm roller width to measure yarn groups of 50 mm widthSpecial designed yarn catching system for easy thread and unthread while the machine is running For easy adjusting machines of the same construction to compare tension values Measurements can be made over the total width of the loom Possibility for connection to a PC; used software »Tension Inspect«
MST special features:
Integrated electronic tension meterStorage of AVG, MIN, MAX and PEAK tension values which can be recalled in the display Motorized take-up fi xture to have a constant unwinding speed (v = 12 m / min) for unchanged measurement Special fi xture to determine shuttle tension Vacuum base for positioning the unit on the work plate Possibility for connection to a PC; used software »Tension Inspect«
For measure the tension
of sewing machinesModel MST-500For determine the
tension of yarn groups
Model KXE-20K
Subj
ect
to c
hang
e w
ithou
t no
tice.
SCHMIDT
Calibration M
aterial*
Standard features:
Battery or mains-operated (MST-2000 only mains-operated) Zero setting by using the "Zero" button before measurement Output signal (option): analog 0 - 2 V DC digital RS 232 Switchable units cN and g Inspection Certifi cate with calibration report optionally available
Standard features:
Storage of AVG, MIN, MAX and PEAK tension values which can be recalled in the display Output signal: digital USB Data communication to a PC using standard programs, e. g. Terminal, Win Wedge, Lab View, etc. LiPo accumulator Inspection Certifi cate with calibration report optionally available
C
C 16
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Hand-Held, electronicSZM Series
For pretensioned ropes and belts asguy wires, support cables, catenary ropes, etc.
Model SZM35 Tension ranges from from 0 - 100 daN 0 - 2000 daN, max. Ø 16 mm
For ropes, buffer tubes and cablesup to max. 30 mm Ø
Model SZM1 - SZM211 Tension ranges from 0 - 5 daN to 0 - 500 daN
SZM3 special features:
For use in closed force systemsMinimal sensor infl uence on the tension by smallest defl ection angle Independent of the material diameter by means of the material thickness compensator Available with special rollers also for tape grooved material, such as tension belts
SZM1 and SZM2 special features:
No infl uence of the material diameter and measured material to the readingsNo excursion of the material being measured from its guidance For measurement the sensor is gently pressed against the material being measured The measuring range can be reduced by changing the material path (max. 3 measuring ranges)
please ask for
additional
information!
Model SZM1
Model SZM3
Standard features:
Ball-bearing mounted, V-grooved guide rollers Measuring head width depending on measuring range from 220 up to max. 520 mm V-grooved or tape rollers are available in different materials (steel, ceramic etc.) and other dimensions on request
Standard features:
Measuring head width 600 mm (standard) Rugged design with hardened steel rollers High resolution and accuracy < 1 % Digital display SCD-SZM-DMS is required
fi g. 1: Constructions with different measuring head widths
Available Models
Model
SZM1 for material up to max. 6 mm Ø SZM2 for material up to max. 30 mm Ø
Display Units
Model SCA-SZM(only for SZM1 and SZM2)
• Analog display with different measuring ranges (100 % and 30 % of nominal load)• Output signal 0 - 1 V (Option 0 - 5 V)• Zero adjustment for the sensor• Battery operated
fi g. 2: Material thickness compensator for adjusting the material diameter
Closed Force System
Available Models
Model
SZM3-S12 for material from 4 - 12 mm Ø SZM3-S16 for material from 8 - 16 mm Ø
Model SCD-SZM and SCD-SZM-DMS
• Digital Display (LCD)• Displays the current reading or the peak value• automatic zero setting of the sensor• Battery operated
D
D 1
c o n t r o l i n s t r u m e n t s
0001...00100100...10000001...0010
stIN TENSIONMETERSWORLDWIDE1
0001...00100100...10000001...0010
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Stationary, electronicOnline-Measuring Systems
Online Tension Measuring Systems
Subj
ect
to c
hang
e w
ithou
t no
tice.
B Complete Tension System 3-Roller Sensor only
sensor and display unit provide continuous tension readingsthe analog output signal can be used for recording and control purposesCustomer Signal Processing:for example closed loop control
Analog output0 - 10 V DC(standard)
C Tension System 1-Roller Sensor only
replacing an existing reversing pointexternal amplifi er with analog outputsavailable with or without guiderollerCustomer SignalProcessing:for example closedloop control
A Tension System 3-Roller Sensor only
for use with customer supplied indicators and closed loop control units orcustomer must supply regulated DC power sourceCustomer Signal Processing:for example closed loop control
Analog output0 - 1 V DC(standard)0 - 10 V(optional)
Software (optional equipment):
»Sensor View« (WIN’95 and higher WIN 7 only 32 Bit)
The series TS can be mounted online for continuous tension monitoring.The sensor can be connected to a PC using RS 232 or RS 422 (optional) output.With the programm »Sensor View« the tension reading of max. 32 TS sensors can be transfered to a PC. All datas are stored in an EXCEL fi le (.xls).
Please ask for
additional information !
Digital outputRS 232 or RS 422(optional)
We provide the best solution. Pleasecontact our technical departmentto discuss your applications.
Main Features:
Real time tension display Long time recording using operator set time span and sampling rate Analyzing and printing of all stored data with time (graphs and numeric report) Zero setting and cali- bration of the sensor using PC
Depending on the application, SCHMIDT Online Tension Sensorscan be supplied alone or as part of a complete system:
Digital outputRS 232 or RS 422
(optional)
SCHMIDT Online-sensors and display units:
For the continuous measurement of the running line tensions of threads and yarns, wires, cables, optic and carbon fi bers and similar materials, SCHMIDT offers a wide variety ofsensors using different guide rollers and frontplate dimensions.Measuring principle 3-Roller Tension System:3-roller measuring system, consisting of two outer guide rollers and a middle measuring roller. The tension of the measured material slightly defl ects the measuring roller.This defl ection (up to 0.5 mm) is measured by a load cell. The built-in amplifi er then generates an analog output signal which is proportional to the measured tension.Measuring principle 1-Roller Tension System:In combination with 2 outer reference guiding points the sensor builds a force triangle. The angle of contact has to be stable. The sensor uses straingauges and supplies a output signal in mV or V (with integrated amplifi or).
Analog output0 - 10 V DC(standard)
For more see page G
Continuous measurement
and data logging
D
D 2
c o n t r o l i n s t r u m e n t s
Stationary, electronicTS Series
Universal Online Tension Sensorfor yarns, fi bers, thin wires, etc.Sensors for many
applications
Available Models
MODEL
TS 1-50 0 - 50 64 PA: 0.12 mm Ø TS 1-100 0 - 100 64 PA: 0.12 mm Ø TS 1-200 0 - 200 64 PA: 0.12 mm Ø TS 1-500 0 - 500 64 PA: 0.20 mm Ø TS 1-1000 0 - 1000 64 PA: 0.30 mm Ø TS 1-2000 0 - 2000 124 PA: 0.50 mm Ø TS 1-5000 0 - 5000 124 PA: 0.80 mm Ø TS 1-10 K 0 - 10 daN 124 PA: 1.00 mm Ø TS 1-20 K 0 - 20 daN 224 PA: 1.50 mm Ø TS 1-50 K 0 - 50 daN 224 Steel rope 1.50 mm ØOther tension ranges and measuring head widths available on request.Other units of measure available – g or kg.* Outside dimensions of front plate** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model TS 1
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 2000 Hardcoated aluminium Code K 3500 Hardcoated aluminium Code H 5000 Plasma-coated aluminium (for Model TS 1-100 and higher ranges) Code T 1000 Plastic (POM) black Code ST 1000 Hardened steel Code B 1000 Tempered steel for tire cord Code CE 1 1000 Ceramic Code ASY 1000 Hardcoated aluminium Code ASYB 1000 Tempered steel for tire cord asymmetrical groove for Model TS 1-500* and higher ranges
U-grooved
Code U 2000 Hardcoated aluminium
10 Tension ranges from 0 - 50 cN to 0 - 50 daN
Output Signal (Supplied with diode connector)
Standard Output signal 0 - 1 V DC Code A 2 Output signal 0 - 10 V DC Code A 3 Output signal 4 - 20 mA DC Code 232 Output signal digital RS 232, analog 0 - 1 V DC (Communication frequency max. 100 readings / sec)
Code 232 H * Output signal digital RS 232, analog 0 - 1 V DC (Communication frequency max. 500 readings / sec)
* Available only for selected ranges. Please contact us. Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Specifi cations see page D 7
Special features model TS1:
Easy to installMechanical overload protectionMany confi gurations are possibleEasy calibration by operatorVarious output signalsWide variety of roller types can be specifi ed
Standard features model TS1:
Ball-bearing mounted, V-grooved guide rollers Rugged aluminium housing Power supply: + 12 ... 24 V DC (1-phase, regulated) Inspection Certifi cate with calibration report optionally available
Universal sensor for
continuous measurement
Model TS1-200
with ceramic guiderollers (Code CE1)
Model TS1-5000-CE1
TS1-1000 + ASY + A 3 = TS1 – 1000 – ASY – A3
Code for o
utput signal /
power supply
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
(if not st
andard)
Li
ne Speed
vmax. ...
m / min
TS SERIES
Roller
Mater
ial
* Measuring Head Width 124 mm
D
D 3
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Stationary, electronicTS Series
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Tension sensors for fl exible wire, cable, plastictubing and other materials up to 8 mm Ø
Available Models
MODEL
TSH-1000 0 - 1000 150 PA: 0.30 mm Ø TSH-2000 0 - 2000 150 PA: 0.50 mm Ø TSH-5000 0 - 5000 150 PA: 0.80 mm Ø TSH-10 K 0 - 10 daN 200 PA: 1.00 mm Ø TSH-20 K 0 - 20 daN 250 PA: 1.50 mm Ø TSH-50 K 0 - 50 daN 250 Steel rope 1.50 mm Ø (7 x 7 x 0.20)Other tension ranges and measuring head widths available on request.Other units of measure available – g or kg.* Outer distance between outside guide rollers or outside dimensions of front plate** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model TSH
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 4000 Hardened-steel
U-grooved
Code R 1 4000 Hardened-steel (radius R 5)
6 Tension ranges from 0 - 1000 cNto 0 - 50.00 daN
Special tension sensors with ceramic pinsfor yarns and fi bers at high speed
Available Models
MODEL
TS P-50 0 - 50 64 PA: 0.12 mm Ø TS P-100 0 - 100 64 PA: 0.12 mm Ø TS P-200 0 - 200 64 PA: 0.12 mm Ø TS P-500 0 - 500 64 PA: 0.20 mm ØOther tension ranges and measuring head widths available on request.Other units of measure available, such as g.* Outside dimensions of front plate** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model TSP
Tensio
n Ranges
cN
Measurin
g Head
Width*
mm
SCHMIDT Calibratio
n**
with ru
nning fi lament
approx. 300 m / m
in
Guide Pins see page F
Standard 6000 AL-Oxide ceramic 5 mm Ø
4 Tension ranges from 0 - 50 cNto 0 - 500 cN
Output Signal / Power Supply · Specifi cations Models TSP and TSH same as Model TS 1 (see page D 2 and D 7)
Special features model TSH:
Guide rollers 30 mm Ø, available with V- or U-grooveTSH standard features same as Model TS 1. Custom designs available – contact our technical department.
Special features model TSP:
Non-rotating, exchangeable ceramic pinsSuitable only for yarns and fi bers – TSP standard features same as Model TS 1
For line speeds up to vmax. 6000 m /min
Model TSP-200
Hardened guide rollers for heavy-duty appli-
cations and minimized material defl ection
Model TSH-5000
Subj
ect
to c
hang
e w
ithou
t no
tice.
Li
ne Speed
vmax. ...
m / min
Line S
peed
vmax. ...
m / min
Pin M
aterial
Roller
Mater
ial
D
D 4
c o n t r o l i n s t r u m e n t s
Stationary, electronicTS Series
Available Models
MODEL
TSF-100 0 - 100 270 PA: 0.12 mm Ø TSF-200 0 - 200 270 PA: 0.12 mm Ø TSF-500 0 - 500 270 PA: 0.20 mm Ø TSF-1000 0 - 1000 270 PA: 0.30 mm Ø TSF-2000 0 - 2000 270 PA: 0.50 mm Ø TSF-5000 0 - 5000 270 PA: 0.80 mm ØOther tension ranges available on request.Other units of measure available, such as g.* Outer distance between outside guide rollers** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model TSF
Tensio
n Ranges
cN
Measurin
g
Head Width*
mm
SCHMIDT
Calibration M
aterial**
Guide Rollers see page F
V-grooved
Standard 5000 Hardcoated aluminium
6 Tension ranges from 0 - 100 cNto 0 - 5000 cN
Output Signal / Power Supply · Specifi cations Models TSL and TSF same as Model TS 1 (see page D 2 and D 7)
Special tension sensors feature large rollers to minimize bendingof materials like fi ber optics, carbon and technical fi bers
Available Models
MODEL
TSL-50 0 - 50 150 PA: 0.12 mm Ø TSL-100 0 - 100 150 PA: 0.12 mm Ø TSL-200 0 - 200 150 PA: 0.12 mm Ø TSL-500 0 - 500 150 PA: 0.20 mm Ø TSL-1000 0 - 1000 150 PA: 0.30 mm ØOther tension ranges and measuring head widths available on request.Other units of measure available, such as g.* Outside dimensions of front plate** Suitable for 95 % of applications (see also chart on page 9) PA = Polyamide Monofi lament
Model TSL
Tensio
n Ranges
cN
Guide Rollers see page F
V-grooved
Standard 4000 Hardcoated aluminum
U-grooved
Code T 4000 Plastic (PVC) red (same dimensions as standard roller)
5 Tension ranges from 0 - 50 cNto 0 - 1000 cN
Special features model TSF:
Large bending radius for gentle handling of sensitive materialBall-bearing mounted, V-Grooved guide rollers with 70 mm ØThe outer rollers can be moved downwards to minimize contact in case of non-measurements – TSF standard features same as Model TS 1
Special features model TSL:
Gentle handling of sensitive material during measurementExtremly leight weight, low inertia guide rollersBest suitable for low tension ranges – TSL standard features same as Model TS 1
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
32 mm Ø guide rollers mini-
mize material defl ection With movable
outer rollers
Model TSF-200
with guide rollers (Code T)
Model TSL-50-T
TSL-500 + T + A 2 = TSL – 500 – T – A2
Code for o
utput signal /
power supply
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
(if not st
andard)
Li
ne Speed
vmax. ...
m / min
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial Roller
Mater
ial
Measurin
g
Head Width*
mm SCHMIDT
Calibration M
aterial**
D
D 5
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Stationary, electronicTS Series
Available Models
MODEL
TSB 2-1000 0 - 1000 30, 36, 41, 50, 100 TSB 2-2000 0 - 2000 30, 36, 41, 50, 100 TSB 2-5000 0 - 5000 10, 15, 20, 30, 36, 41, 50, 100 TSB 2-10 K 0 - 10 daN 10, 15, 20, 30, 36, 41, 50, 100 TSB 2-20 K 0 - 20 daN 10, 15, 20, 30, 36, 41, 50, 100 TSB 2-50 K 0 - 50 daN 10, 15, 20, 30, 36, 41, 50, 100Other tension ranges available on request.Other units of measure available – g or kg.* SCHMIDT calibration material textile ribbon or fi lm, depending on tension range and roller width
Model TSB 2
Tensio
n Ranges*
cN
Guide Rollers see page F
Standard 1000 Hardcoated aluminium, 13 mm Ø
6 Tension ranges from 0 - 1000 cNto 0 - 50 daN
Online sensors for continuously measuring low or high tensionsof textile ribbons, fi lms, foils, fi ber bunches, etc.
Available Models
MODEL
TSB 1-100 0 - 100 60 7, 10, 15, 20 TSB 1-200 0 - 200 60 7, 10, 15, 20 TSB 1-500 0 - 500 60 7, 10, 15, 20 TSB 1-1000 0 - 1000 60 7, 10, 15, 20 TSB 1-2000 0 - 2000 120 7, 10, 15, 20Other tension ranges and measuring head widths available on request.Other units of measure available – g or kg.* SCHMIDT calibration material textile ribbon or fi lm, depending on tension range and roller width** Outside dimensions of front plate
Model TSB 1
Tensio
n Ranges*
cN
Measurin
g
Head Width**
mm
Roller
Widths
mm
Guide Rollers see page F
Standard 1000 Hardcoated aluminum, 13 mm Ø (Exception: 7 mm rollers are made of nickel-plated steel)Other roller materials (nickel-plated steel or plastic), as well as special coatings (ceramic, anti adhesive or carbon fi bres - NAV optimized) are available on request.
5 Tension ranges from 0 - 100 cNto 0 - 2000 cN
Output Signal / Power Supply · Specifi cations Models TSB 1 and TSB 2 same as Model TS 1 (see page D 2 and D 7)
Roller
Widths
mm
This model is custom-built to your specifi capplication requirements.
Please submit the following details: – Description of application – Expected tension range – Kind and dimensions of the material to be measured – Material sample of about 5 m
Special features model TSB1:
Dual-fl anged outer guide rollers with various widths, from 7 mm to 20 mmThe roller width should correspond with the width of the material to be measured. – TSB 1 standard features same as Model TS 1
Special calibration using customer supplied samples is available: Please supply a sample of at least 5 m in length.
Cylindrical rollers with special
supports for higher tension ranges
Customized confi guration
Model TSB2-50K-30Model TSB1-500-20
Max. width of material
to be measured 20 mm
Subj
ect
to c
hang
e w
ithou
t no
tice.
Li
ne Speed
vmax. ...
m / min
Li
ne Speed
vmax. ...
m / min
Roller
Mater
ial Roller
Mater
ial
D
D 6
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
A
B
0 - 10 V
0 - 10 V
Stationary, electronicTS Series Series
Sensors for low-cost applicationsLTS SERIES
Output Signal
Standard Output signal 0 - 1 V DC Code A 2 Output signal 0 - 10 V DC Code A 3 Output signal 4 - 20 mA DC Code 422 Output signal digital RS 422 Code 422 A Output signal RS 422 and 0 - 1 V DC
Available Models
MODEL
LTS 0 - 100 cN up to 0 - 20 daN see TS1 LTSH 0 - 1000 cN up to 0 - 20 daN see TSH LTSL 0 - 100 cN up to 0 - 1000 cN see TSL LTSB 0 - 100 cN up to 0 - 2000 cN see TSBOther tension ranges available on request. Other units of measure available – gSCHMIDT calibration material Polyamide Monofi lament PA (see chart on page 9)
Measurin
g Range
Guide R
ollers
(page D2)
Special features:
Easy to installMechanical overload protection Different output signals: Analog: 0 - 1 V DC (standard) Code A2: 0 - 10 V (optionally) Digital: Code 422: RS 422 for several sensors connected in seriesEasy calibration by operatorAccording to the application a wide range of different models are available, which differ in the roller geometry and material, e. g. LTS, LTSH; LTSL and LTSB
Model LTS-422
Universal Online Tension Sensorfor yarns, fi bers, thin wires, etc.
Model LTS8 Tension ranges from 0 - 100 cN to 0 - 20 daN
Standard feature:
Ball-bearing mounted, V-grooved guide rollers Power supply: + 12 ... 24 V DC (1-phase, regulated) Inspection Certifi cate with calibration report optionally available
LTS-1000 + ASY + A 3 = LTS – 1000 – ASY – A3
Code for o
utput signal /
power supply
Complete Order N
o.
To place an orderplease indicate the complete model number, e.g.:
Model with
tensio
n range
Code for g
uide roller
s
(if not st
andard)
(if not st
andard)
Model LTSH
mit 30 mm large guide rollers for wires, thin ropes and cables up to 8 mm Ø
Converter RS 422/232
LTS with standard output for connecting a display unit, Option: Display and downloading readings on a PC
LTS with Code 422; max. 32 sensors can be connected in line to a PC
please ask for
additional
information!
D
D 7
c o n t r o l i n s t r u m e n t s
stIN TENSIONMETERSWORLDWIDE1
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Specifi cations
Calibration: According to SCHMIDT factory procedure Accuracy: ± 1 % FS* and ± 1 digit Other calibration material: ± 3 % FS* or better Overload protection: 100 % of range Measuring principle: Strain gauge bridge Measuring roller defl ection: 0.5 mm max. Signal processing: Analog (Option: digital) Output signal: Standard: 0 - 1 V DC (analog) Option: 0 - 10 V DC, 4 - 20 mA (analog) Option: RS 232 (digital) Damping (fg): Standard: 30 Hz (other values on request) Temperature drift: Less than ± 0.05 % FS*/ ºC Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Power supply: + 12 ... 24 V DC, 21 mA (regulated) Housing material: Aluminium Weight, net (gross): e.g. Model TS 1-100 approx. 300 g (800 g)
Delivery includes: If sensor is ordered only: 1 diode male connector (Cable length – see price list) If sensor and display unit is ordered: 1 connecting cable for each sensor
* FS = Full Scale
Stationary, electronicTS Series and SC Series
Online sensors TS SERIES
Models TS 1, TSP, TSH, TSL, TSF, TSB 1, TSB 2
fi g. 1:Dimensions in mm of Series TSshown on Model TS1-1000(Dimensional drawings of all models available on request)
Subj
ect
to c
hang
e w
ithou
t no
tice.
Specifi cations
Calibration: According to SCHMIDT factory procedure Accuracy: ± 1 % FS* and ± 1 digit Other calibration material: ± 3 % FS* or better Overload protection: 100 % of range Measuring principle: Strain gauge bridge Measuring roller defl ection: 0.5 mm max. Signal processing: Analog (Option: digital) Output signal: Standard: 0 - 1 V DC (analog) Option: 0 - 10 V DC, 4 - 20 mA (analog) Option: RS 422 (digital) Damping (fg): Standard (analog): 30 Hz (others on request) Standard (digital): customer fl exible adjustable Temperature drift: Less than ± 0.05 % FS*/ ºC Temperature range: 10 - 45 ºC Air humidity: 85 % RH, max. Power supply: Analog: + 12 ... 24 V DC, 21 mA (regulated) Digital: + 12 ... 24 V DC, 50 mA (regulated) Housing material: Aluminium Weight, net (gross): e.g. Model TS 1-100 approx. 300 g (800 g)
Delivery includes (Standard): If sensor is ordered only: 1 diode male connector (Cable length – see price list) If sensor and display unit is ordered: 1 connecting cable for each sensor
* FS = Full Scale
Online sensors LTS SERIES
Models LTS, LTSH, LTSL, LTSB
fi g. 2:Dimensions in mm of Series LTSshown on Model LTS-1000(Dimensional drawings of all models available on request)
D
D 8
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
0 -10 V
0 -10 V
Stationary, electronicDisplay Units
Digital display units with data analysis for one sensor
SC SERIES
SCHMIDT display unitsare available for all SCHMIDTtension sensors.
SC Series Standard features
For sensors with output signal 0 - 1 -V For sensors without amplifi er the special designed display units SC-PMD and SCD-1D with inte- grated amplifi er can be used Connection for one sensor Power supply for connected sensor Sensor calibration adjustment (Zero and Gain) Analog output 0 - 10 V DC Dotmatrix LCD display User-set damping for output signal and display Software »Tension Inspect« for displaying and saving readings on a PC (optional) CE certifi ed with sensors connected
Special features:
Panel-mount digital display Output 0 - 10 V analog (option: RS232, RS422 or current)MIN and MAX limits with color-coded indicators and open collector Calibration for 3 different materials can be saved
Special features:
Desktop unit Output 0 - 10 V analog, RS 232 digital,MIN- MAX-limits with color-coded indicators and open collector outputPower supply through seperate AC adapter
Model SC-PM Model SCD-1
Model SC-PM Model SC-PMD Model SCD-1 Model SCD-1D Specifi cations
Digital display: 8 digit LCD with user-set tension range 8 digit LCD with user-set tension range Height of digit: 12mm 12 mm Units of measure: cN, daN, g or kg, depending on range cN, daN, grs or kg, selectable Damping (fg) adjustable to: electronic adjustable electronic adjustable Output signal: 0 - 10 V DC (option: RS 232, RS 422, 4 - 20 mA) 0 - 10 V DC, RS 232 Amplifi er: no yes no yes Exit hub: Terminal strip 2 x Mini-DIN (PS 2) Voltage output for sensor: yes yes Power supply: 12 ... 24 V DC, 100 mA 12 ... 24 V DC , 100 mA AC adapter: External AC adapter 100 - 240 V AC, 50 - 60 Hz, with 3 adapters (EU/USA/UK) Alarm output: 30 V DC, 10 mA, open collector 35 V DC, 20 mA, 2 x open collectors Housing: Plastic Aluminium (with wall mounting facility) Dimensions (L x W x H): 120 x 95 x 48 mm 182 x 85 x 34 mm Cutout required: 92 x 44 mm Weight, net (gross): approx. 300 g (1000 g) approx. 300 g (1000 g)
Connecting example for display units for displaying and saving the readings on a PC
Ask for additonal
information
D
D 9
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
75 min. 25
106/8
M25 x 1.5Ø 24.8
SW 19
M3/
4/5
5/8/
10
Series RFS ®15 tension rangesfrom 0 - 1 N up to 0 - 1000 N
Stationary, electronicRFS Series
Tension sensor - single roller system - forinstallation at an existing defl ection pully
Two models: - RFS without integrated amplifi er - RFSE with integrated amplifi er
Special features for model RFS and RFSE:
Overload protection up to 800 % High precision sensor with best accuracy High mechanical stiffness of the load cell enables measurement with virtually no excursion Independent of the force introduction point, not affected by lever arm action A huge number of rollers with different geometry and different materials are available on request - send us your demand profi le
Model RFS
Subj
ect
to c
hang
e w
ithou
t no
tice.
Model RFSE
Standard features model RFS and RFSE
Rugged, stainless steel housing Threaded housing (M 25) with lock-nuts permits easy mounting and simple alignment Depending to the used guide roller different bearing journals are available Supplied with 3 m shielded cable with open ends; other lengths optional available
Additonal features model RFSE
Integrated amplifi er Power supply 20 ... 24 V DC Output signal: - Analog: 0 ... 10 V (standard) - Code 20: 0 ... 20 mA - Code 24: 4 ... 20 mA
Ask for additional
Information!
RFS with and without guide roller
RFSE with integrated amplifi er
Options
• Seal gas protection• Vacuum design• Cylindrical sensor housing
Model SK122For higher ranges up to 20 kN other models e. g. SK122 are available. Ask for further informa-tion including your demand profi le!
For ribbons and wovens the model RFS cab be used as a tape tension meter with one or two RFS installed. Inform us about your application!
D
D 10
c o n t r o l i n s t r u m e n t s
Fz
Fz
α
Hand-Held, mechanicalRFS Series
Available Models
MODEL
RFS-2 RFSE-2 2 5, 8 or 10 RFS-5 RFSE-5 5 5, 8 or 10 RFS-10 RFSE-10 10 5, 8 or 10 RFS-20 RFSE-20 20 5, 8 or 10 RFS-30 RFSE-30 30 5, 8 or 10 RFS-40 RFSE-40 40 5, 8 or 10 RFS-50 RFSE-50 50 8 or 10 RFS-60 RFSE-60 60 8 or 10 RFS-100 RFSE-100 100 8 or 10 RFS-200 RFSE-200 200 8 or 10 RFS-300 RFSE-300 300 8 or 10 RFS-400 RFSE-400 400 8 or 10 RFS-500 RFSE-500 500 10 RFS-600 RFSE-600 600 10 RFS-1000 RFSE-1000 1000 10
Connection Types
Code O Connecting cables with open ends Code S Connecting cables with 6-pole plug
GuideRoll
Line Tension
WrapAngle
αWrap Angle
Resultant Force Multiplier
30° 0.5 x (Line Tension)60° 1.0 x (Line Tension90° 1.4 x (Line Tension)
180° 2.0 x (Line Tension)
Additional Equipment
TS 621 Universal amplifi er TS 621-HD Amplifi er for high-frequency output TSA 723 Small compact amplifi er DPM 502 LED-display, 3 ½ digit, power 24 V AC
Output Signal
Standard Analog 1.5 mV/V (nur RFS) Standard Analog 0 - 10 V DC (nur RFSE) Code 20 Current 0 ... 20 mA (only RFSE) Code 24 Current 0 ... 24 mA (only RFSE)
Tensio
n Ranges
N
Bearin
g
journal
Ø mm
Recommended wrapping angle 20 ... 180°
Calculation of the tension range:
Amplifi er and display unitsfor model RFSSensor RFS without amplifi er can be connected to different amplifi ers.
General function:
Required power 24 V DC Temperature and long time stability Provides a well-regulated power supply for sensor excitation Zero and gain adjustment
Special features display unit DPM 502:
LED-Display, 3 ½ digit freely scalable front-side operation 24 V DC power supply
Specifi cations
Accuracy: ±0.5 % Full Scale or better Measuring roller deviation: 0.07 mm Sensor output: 1.5 mV/V (RFS), 0 ... 10 V Power supply: 10 V, max. 12 V DC (RFS) 20 ... 28 V DC (RFSE)
More details on request
Special features model TS 621:
Galvanic isolation (power and measu- ring signal)Output: Analog 0 - 10 V Option: - 0 - 10 V with fi lter 0.5 ... 20 Hz - 0/4 ...20 mA - Second analog output with selectable amplifi cations factor 2x ... 5x - High frequency output 40 kHz
Special features model TSA 723:
Small, compact designOutput signal: analog 0 - 10 V Option: 0 ... 20 mA 4 ... 20 mA
Model with
tensio
n range
Bearing journal Ø
in mm
cable length in m
Complete Ordern
No.
(standard 3 m)
connection typ
es
To place a order:please indicate the complete model number e.g. RFSE-5 + 8 + 3 + S + 20 = RFSE – 5 – 8 – 3 – S – 20
Output signal
(if not st
andard)
E
E
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Custom designed modelsSu
bjec
t to
cha
nge
with
out
notic
e.
Tension Meter for hand-held Use
Tension Meter for Online Use
Model DXHWith hooks to measure fi xed ropes up to 5 mm Ø, e. g. guy wires
If our standard instruments can not be used, we try to modify our standard models according your demand profi le. Please inform us about your application requirements.
Model DX2With extension handle and ceramic pins to reach critical measuring positions
Model DX2With extended measuring feeler for diffi cult to reach measuring positions
Model DX2With small guide rollers for limited access applications, e. g. EDM machines
Model DXXWith big roller and high range up to 80 daN using a unique rope catching system
Model DXRWith small, both-sided ball bearing mounted rollers for high tensions up to 50 daN
Model DTMBWith extended measuring feeler for diffi cult to reach measuring positions
Model DTBBEquipped with tape rollers with big fl anges for better material control
Model DX2SWith big guide rollers and big measuring head width for less material defl ection
Model TS1Sensor with non-rotating ceramic pin and outside roller, as well as fi ber guide plates
Model TSFTape roller with big Ø for fragile materials to be measured, as fi ber optics or glass fi bre strands
Model TSB1-roller-system with anti adhesive coating e. g. scotch tape foils
Model TSB2Crank handle to open or closing the sensor, as well as not-rotating ceramic tape roller
Model LTSSensor with integrated display
Model TSH1-roller-system with big guide roller made of hard material for steel cord
Model TSESmall compact sensor for textile; non-rotating pins with special yarn guiding
F
R 3
8
Ø 1
2
6
Ø 1
7
Ø 1
6
6
Ø 1
2.5
Ø 1
2
6
Ø 1
5
8
Ø 7
.4
3.7
Ø 1
0
5.7
Ø 1
2
6
Ø 1
5
8
Ø 1
2
11.5
Ø 1
8
5
Ø 2
9.5
R 5
Ø 3
9.5
13
Ø 1
2
6
Ø 1
6
8
Ø 1
0
3.7
Ø 7
.4
5.7
Ø 1
2
6
Ø 1
6
8
Ø 1
2
6
Ø 1
5
8
Ø 7
5.6
Ø 5
.2
8.2
Ø 6
Ø 3
.2
3.6
5.47
Ø 8
0
5
Ø 7
0
Ø 1
3
Ø 1
6
a
a + 2
Ø 2
9.5
8
Ø 3
4.5
5.8
Ø 3
2
2.5
Ø 4
0
4
F
c o n t r o l i n s t r u m e n t s
12.2
15.3
Ø 3
Ø 2
Ø 5
Ø 5
Ø 1
3.5
Ø 1
6,5
7.1
R 1.75
Ø 1
8R 3
Ø 3
0
16
Ø 1
4R 20
Ø 1
8
17
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
10.7
4.5
Ø 1
1
7.4
Standard
Standard
StandardStandard
Standard Standard
Standard
Standard
Standard
Standard
Standard
SCHMIDT Guide Roller Dimensions Optional AccessoriesStandard All dimensions are given in mm
Optional All dimensions are given in mm
Guide RollersOptional Accessories
ModelZF2DXEDXVZEFDTEBDTEXDTVBDTVXDXES
ModelDXFDTFBDTFXTSLDXFS
Tape rollers
ModelZD2DX2DN1DX2SZEDDTMBDTMX
ModelDXLTSHDTLBDTLX
ModelQMKMKM( DN1)
ModelTSF
ModelTS1
ModelDXBDXRDXTDTBBDTBXTSB1TSB2DXBSDXTS
ModelDXPTSP
ModelETBETX
Code T
Code CE1
ModelZF2DXEDXVZEFDTEBDTEXDXES
Code ST Code ASYModelZD2DX2DN1DX2SDTMBDTMXTS1
Code H
Code R1
ModelZD2DX2QMKDN1DX2SZEDDTMBDTMXTS1
Code U
Code KModelZD2DX2DN1DX2SZEDDTMBDTMXTS1
ModelDX2DN1DX2SDTMBDTMXTS1
ModelDXLTSHDTLBDTLX
ModelZF2DXEDXVZEFDTEBDTEXDTVBDTVX
ModelETPBETPX
Code W
ModelZD2DX2DN1DX2SZEDDTMBDTMXTS1Model
ZD2DX2DN1DX2SDTMBDTMXTS1
ModelDX2DN1DX2SDTMBDTMXTS1
up to V̄max.2000 m / min
Specialrollers forhigh linespeeds
up to V̄max.3500 m / min
Plastic (POM)black
Nickel-platedsteel
Code T
Code W
Plastic (POM)black
Nickel-platedsteel
Code A Air Damping
Code L
Code M Memory Pointer
This adjustable mechanical airdashpot is recommended for appli-cations in which great fl uctuationsof the measured tension occur, asin spooling and winding machines.This assures steady tensionreadings on the scale.
Facilitates acquisition of therunning material when measuringhigh tensions. Reduces forcenecessary to extend outer rollers:Recommended for tension rangesof 10 daN and higher.
Retains the highest measured value(PEAK). Available for mechanicaltension meters (Series DX only).
Special Lever
a from 7 mm to 100 mm
Code B
Subj
ect
to c
hang
e w
ithou
t no
tice.
Code V 1 ModelDN1DTMBDTMX
Code ASYB
We have a wide range of guide roller. Please ask for our roller catalog!Beside the standard roller, we also offer roller with different geometry, special coating e. g. ceramic coating or anti adhesive coating or roller made of special material like e. g. stainless steel.
G
G
c o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
ZF2 A2 ● ● ● ● ● ● ● ● ● ● ●
ZD2 A2 ● ● ● ● ● ● ● ● ●
DX2 A4 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
DXE A5 ● ● ● ● ● ● ● ●
DXV A6 ● ● ● ● ● ● ● ●
DXP A6 ● ●
DXF/DXL A7 ● ●
DXK A8 ●
MKM A8 ●
DXB A9 ● ● ●
DXR A10 ● ● ●
DXT A10 ● ● ●
DN1 A12 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Q B1 ● ● ● ● ● ● ● ● ●
MK B2 ● ● ● ●
DX2S B2 ● ● ● ● ● ● ● ● ● ●
DXES B2 ● ● ● ● ● ● ● ●
DXFS B2 ●
DXBS B2 ● ● ●
DXTS B2 ● ● ●
PT C1 ● ●
ZEF C4 ● ● ● ● ● ● ● ● ● ● ● ●
ZED C4 ● ● ● ● ● ● ● ● ● ●
DTMB C5 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
DTMX C6 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
DTEB/DTEX C10 ● ● ● ● ● ● ● ● ●
DTVB/DTVX C10 ● ● ● ● ● ● ● ●
DTFB/DTFX C11 ●
DTLB/DTLX C11 ● ●
DTBB/DTBX C12 ● ● ●
ETB/ETX C14 ● ● ● ● ● ● ● ● ●
ETPB/ETPX C14 ● ● ●
MST C15 ● ●
KXE C15 ●
TS1 D2 ● ● ● ● ● ● ● ● ●
TSP D3 ● ●
TSH D3 ● ● ● ● ●
TSL D4 ● ● ● ● ● ● ● ● ●
TSF D4 ●
TSB1 D5 ● ● ●
TSB2 D5 ● ● ●
RFS/RFSE D9 ● ● ● ● ● ● ● ● ● ● ●
SelectionGuide
ApplicationsNarro
w web machines
Tensio
ning
Braiding
SewingOpen en
d spinning
Polyeste
r spinning
Raschel k
nitting
Circular kn
itting
Warpers
SizingPirn winders
Winding
Texturizi
ng
Weaving (lo
om only)
Warping
Twisting
Strip winding
Wire ED
M
Wire drawing
Extruders
Fine w
ire drawing
Fiber o
ptics / B
uffer tu
bes
Winding and coilin
g
Stranders
T E X T I L E W I R E
This table is for guidance only and does not claim to be exhaustive.
MODEL Page
Subj
ect
to c
hang
e w
ithou
t no
tice.
Hand-held, mechanical
Stationary, mechanical
Hand-held, electronic
Stationary, electronic
H
Hc o n t r o l i n s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLDwww.hans-schmidt.com
Tension metersfor special applications
Series FT
Synthetic mesh always looses tension in time. Correct mesh tension is one of the most important conditions for accurate, reproducable and high quality screen printing.Special features:To be used for synthetic and steel meshes Warpwise or weftwise measuring is possible 2 adjustible markers to set limits (MIN, MAX) Protected precision dial gaugeMeasuring range 6 - 50 N/cmDepth of indentation max. 1 mmMeasuring force 2.1 - 3.0 Naccording DIN EN16611
Series RTM
For measuring the static tension of transmission belts ase.g. timing or vee belts. The instrument measures thefrequency of a taut belt and displays the frequency in Hertz or tension in Newton. For meauring the staticbelt has to be tapped to oscillate.
Special features:Hand-held instrument The readings can be displayed as frequency (Hz) or strand force (N or lbf) The belt tension meter includes a display unit as well as a plug in probe for one-hand operation and a probe with cable for limited acces space For determinating the spring force in Newton, 2 parameters are needed. Thereby the following restrictions are obtained: - free strand length 9.99 m - belt mass up to 9.999 kg/mMeasuring range 10 - 800 HzDisplay error ± 1 HzTotal error < 5 %Battery operated Rugged plastic housing Microprocessor controlled belt tension meter Mulitilingual operator guidance and display
Series TEN
For measuring tensionof fi bers and fi laments only.Special features:Compact mechanical tension meter with 2 rollers11 measuring ranges up to 170 g (cN)
Model RTM
Please ask for additional information !
Subj
ect
to c
hang
e w
ithou
t no
tice.
Series SY
For measuring the tension of overhead lines, tensioning ropes, aerials etc.Measuring principle:With the outer rolls, the de-vice will be hooked into thestrained rope. With a knurledscrew, the middle roll will bebrought in the measuring position to press with a con-stant force towards to therope. The generated defl ec-tion is displayed on a dial indicator. The measuring result has to be converted from mm reading to the corresponding force in daN by using a conversion chart.Special features: for ropes diameter up to 20 mm large scale (100 mm Ø)
Model FT
M O R E T H A N
Y E A R S
M O R E T H A N
Y E A R Sc o n t r o l i n
s t r u m e n t s
SCHMIDT · ALL OVER THE TECHNICAL WORLD
www.hans-schmidt.com
Mailing address:HANS SCHMIDT & CO GMBHP. O.B. 1154844 64 WaldkraiburgGermany
Shipping address:HANS SCHMIDT & CO GMBHSchichtstrasse 1684478 WaldkraiburgGermany
Phone:int. + 49 (0) 86 38 / 9410 - 0
Fax:int. + 49 (0) 86 38 / 48 25int. + 49 (0) 86 38 / 678 98
e-mail:info @ hans-schmidt .com
Internet:www.hans-schmidt.com
© 2
0 11
Han
s Sc
hmid
t & C
o. G
mbH
, Wal
dkra
ibur
g
Request Your Free Catalog Today !
SCHMIDT · ALL OVER THE TECHNICAL WORLD
www.hans-schmidt.com
SCHMIDT · ALL OVER THE TECHNICAL WORLD
www.hans-schmidt.com
Our Product Lines
Version E 8 /2 011
Sample Cutter / Weight Balance
Thickness Gauge
Textile Moisture Meter
Torque Meter
Test Stand
Force Gauge
Tachometer
Stroboscope
Hardness Tester
SCHMIDT control instruments –
over 60 years all over the world.
Language