schneider electric didactic catalog 2013

8/20/2019 Schneider Electric Didactic Catalog 2013

1/164

Technical education

Educational

solutionsCatalogue 2013 - 2014


2/164


3/164


4/164

www.schneider-electric.fr2 Educational solutions catalogue 2013-2014

The Electrical engineering program offer

Model and prototype in the electrical engineering program

A prototype is an implementation that obtains and verifies the main

characteristics of a system, even if the technical solutions used are not the

same as those that will be implemented in the industrial system.

Models of systems are the result of a combination of existing components

that can be assembled by temporary means or not, and set, configured or

programmed depending on the specifications and student proposals.

Systems for the teaching of the technological innovation and

eco-design specialties

Charging terminal for

electric vehicle

Brushless case Wiser offer

Energy efficiency improvement model

with the help of standard components of speed variation

Energy management model carried out using

programmable electronic components


5/164

3Educational solutions catalogue 2013-2014

High and low voltage electrical distribution management.

You're looking for a system that can perform medium or low voltage

distribution, earth connectioning diagrams, protection selectivity and electrical

authorization.

Indispensable tool complementing the catalog,the France website, training section:www.schneider-electric.fr

Building management

You're looking for a solution to safely implement an electrical installation for

a building and small service industry

Global management of energy

Your research concerns systems that enable the treatment of renewable

energies and manage energy

Processes and machines management

@ Industrial control and machine safety:

You're looking for solutions to study the basic components of automatedsystems and machinery safety.

@ Drive and motion control:

Your research concerns speed variation systems for synchronous, brushless

and asynchronous motors.

@ Industrial automation and communication:

Your research concerns solutions to understand programming and

communication between systems.

@ Automated systems:

You're looking for solutions so as to implement of automated systems or

production lines.

products and services

Structure of the catalog

To help you in your choice, this catalog offers differentsections:


6/164

www.schneider-electric.fr4 Educational solutions catalogue 2013-2014

Contents

Pages Educational solutions

1- High and low

voltage electricaldistributionmanagement

8 Medium voltage switchboards

10 Communicating low voltage switchboard, energy management switchboard

12 Low Voltage Switchboard for professional school13 IT system cabinet and distribution boards

14 IT system with fault search

16 Earthing diagram (ED) benches

17 Protection selectivity bench

18 Qualification test-bench

19 Habilis system

20 Valhabilis

20 Additional electrical certification case for the Habilis system

21 Securis case

2- Buildingmanagement

24 Residential and small service industry offer

26 KNX modular offer

27 KNX case

28 KNX panel

29 Minibat: instructional mini building

30 KNX pack31 Odace radio frequency discovery kit

32 Alvidis case

33 Addressable fire security bench

34 VDI 19’’ pack

35 BAES Dardo Plus case

36 HD network camera, PELCO security imaging pack

37 Modular offer and kit for the modeling and prototyping

38 Instruction of the energy efficiency of buildings

39 Energy management solutions applied to industry areas

3- Globalmanagement

of energy

42 Modular offer for residential and small industries energy efficiency

43 KNX modular energy efficiency offer

44 Wiser kit, RT2012 application

45 iRio telemeter modular offer

46 Energy efficiency case

47 Ventilation system48 Solar modular offer

49 Instrumented solar panel bench

50 Soleolis: solar panels and wind turbine

51 SolEzy bench

52 Tube solar water heater

53 Solar water heater

54 Lubio system

55 Didalub: management of public lighting

56 Heating control bench

57 Development of the LV switchboard into the energy management switchboard

58 Compensation of reactive energy bench

59 Harmocem: electromagnetic disturbances

60 Harmotris: three-phase network harmonic interference bench

61 Minharmotris: harmonic interferences in three-phase installation

62 Load terminals for electric vehicles64 Smart Grid application

65 Photovoltaic installation, isolated and non-isolated site

66 Vizelia offer

67 Energy efficiency case

4- Processesand machinemanagement

72 Containment cabinet

73 Industrial component wiring bench

74 Motor starter packs

75 Motor starter modular offer

76 Training motors

77 Motor starter bench

78 Machine security modular offer

79 Detection workshop

80 Measurement and control bench

81 ZigBee case

81 Wireless, batteryless button pack and biometric button84 Speed controller and starter packs

85 Educational controllers


7/164


Pages Educational solutions

4- Processes

and machinemanagement

85 Controller case

86 Load bench

87 Altivar speed controller training bench88 Powder brake speed controller bench

89 Altivar 32 case

90 Brushless motor case

91 Axis X and Z test bench, asynchronous motor with flux vector control

92 Axis Z test bench, synchronous or asynchronous servo-motor

94 Mini hoisting system, ML03 cable winch

95 Vertical displacement load test bench, SL02 cable winch

96 SL71 lifting application test bench guidance by flux vector control

97 Swing control system, SLT01 suspended load

100 TSXBT control desk

100 HMI case

101 PLC packages

102 Training PLCs

104 Automation modular offer

105 Automation modular offer, operative part106 RFID modules, card game

107 RFID case

108 RFID package

108 Human - machine dialog pack

109 ZELIO - GSM / Ethernet / Modbus pack

110 Bac Pro wiring base plate, intermediate certification

111 Didaflex baseplates

112 Communication case

113 Comsi case

113 Communications case for teaching

114 3D simulator

115 Industrial shrink wrapper simulator

118 Zelio case

118 Traffic management

119 Lift119 Hanged cage surface treatment equipment

120 Numerical axis

121 Nivoreg: process control bench

122 Xylophonis: Brushless axis

123 2-axis laser machine

124 Pneumatic manipulator with rotary base

125 5 axis manipulator

126 Formatris: automatic part sorting system

127 "Pick and place" system

128 Tapiris: Sorting belt

129 Vision system, suitable for Tapiris or PLC

130 Percetris: Automated machining system

131 Hoist elevator

132 Overhead gantry crane

134 Productis: Integrated production system136 Industrial shrink wrapper packaging machine

137 Industrial packing machine

138 Industrial filler /screwer machine

139 Accumulation table industrial machine

140 Flexible packaging line

141 Flexible dosage line

142 Hydrolis: hydraulic unit

143 Hydraulic lift

144 Air treatment unit

145 Air source heat pump

5- Products and

services

148 Design and operation of MV/LV networks laboratory

150 Renewable energy and energy management laboratory

152 Our publications

152 Services

153 Website154 Index by name

156 Index by reference


8/164

6

High and low voltageelectrical distribution

management


9/164


High and low voltage

electrical distribution management

Medium voltage switchboards ......................................................................................................8

Communicating low voltage switchboardn .................................................................... 10

Low voltage switchboard for professional school .......................................................... 12

IT system cabinet and distribution boards ........................................................................13

IT system with fault searchn ............... ................ ................ ................ ................ ................ ...... 14

Earthing diagram (ED) bench ............... ................ ................ ................ ................ ................. ..... 16

Protection selectivity bench ............... ................ ................ ................ ................. ................ ........ 17

Qualification test-benchn ............... ................ ................ ................ ................ ................ ........... 18

Habilis system ................ ................ ................ ................ ................ ................ ................ ................ ...... 19

Valhabilisn ................ ................ ................ ................ ................ ................ ................ ................ ........... 20

Additional electrical certification cabinet for the Habilis system n ..................20

Securis case ................ ................. ................ ................ ................ ................ ................ ................ ........... 21

Products complying with the provisions ofof the European Directives

Compliance report available on request

All our products are delivered with: @ hard copy of the technical manual and practical exercise book @ a CD with the same documents in a PDF format and the PLC applications


10/164

www.schneider-electric.fr8

High and low voltage electrical distribution management

Educational solutions catalogue 2013-2014

Educational objectives

@ To discover and implement the equipmentof an MV installation.

@ To learn the logging procedures. @ To operate and maintain an MV installation. @ To understand the C18-510 safety

requirements.

Electrical and mechanicalfeatures

@ Power supply:Simulation of the MV by a 400 V three-phase+ Neutral + Earth

@ Dimensions (H x L x D) - weight: _ IM, QM units:

2380 x 375 x 940 mm - 130 kg _ DM1A modular unit:2380 x 700 x 940 mm - 400 kg

_ transformer:960 x 670 x 1135 mm - 550 kg

Principal industries @ Training center

Other industries concerned @ Electrical engineering

@ Maintenance engineering @ Mechanical engineering

Presentation of the kitThis equipment is intended to train on medium voltage, identify risks anddevelop interventions and procedures for medium voltage installations(modular units, transformers, low voltage switchboards, etc.).

This equipment, implemented according to customer specifications,enables, according to the configuration:

@ identification of the different medium voltage distribution architectures @ understanding the electricity safety aspects needed to operate medium

voltage equipment @ discovery of the different types of disconnections @ study of the electrical features of medium voltage equipment: _ features of the equipment _ components constituting a modular unit _ implemented functions _ operating maneuvers _ teaching aid adaptation _ maintenance and recharge operations.

Medium voltage switchboards


Fuse compartment of the SM6 unit SM6 modular unit


11/164


Configuration example of a private industrial stationIM/QM offer:

@ a switch cubicle unit consisting of: _ a 400 A three phase busbar _ a disconnecting switch and 400 A grounding switch to shutdown and

isolate in the SF6 _ a CIT type manual control _ three voltage presence indicators _ three connection pads for a unipolar dry cable. @ a motorized fuse switch combination cubicle unit consisting of: _ a 400 A three phase busbar _ a disconnecting switch and 200 A grounding switch to shutdown and

isolate in the SF6. @ a gear motor 48 V CC, CI1 type containing : _ a MX type shunt release, 48 V CC _ an undervoltage trip, 48 V CC _ four contacts, 2 Open 2 Closed on the switch-disconnector

_

a set of 3 Soléfuse fuses with a 6.3 A striker _ a grounding switch downstream of the fuses connected to the upstreamgrounding switch

_ MV locking/transfo/LV-type C4 Profalux _ a series 20 Sepam relay.

IM/DM1 offer: @ a switch cubicle unit identical to the preceding @ a motorized DM1 circuit breaker unit consisting of: _ a 400 A three phase busbar _ a disconnecting switch and an upstream grounding switch to shutdown

and isolate in the SF6. _ a Fluarc type SF1 circuit breaker to cut in the SF6, 400 A caliber _ a circuit breaker control, RI motorized type_ a counter of mechanical operations

_ A switch control, CS manual type _ three voltage presence indicators _ MV locking/transfo/LV-type C4 Profalux _ a Sepam series 40, T40 transformer protection.

Options: @ a Minera MV/LV transformer, 100 kVA @ a LV switchboard with a sealable circuit breaker

@ security accessory kit consisting of: _ a 45 kV reach pole _ a pole to test voltage _ an AF 20B poster (care for those injured by electricity) _ a PR 11 station name plate _ a PR 10 plate on the door _ an insulating stool, 24 kV _ a window box for gloves

_ a class 3 insulating pair of gloves _ a block of portable lighting _ 5 kg dry powder extinguisher.

Sepam 20

SM6 switch disconnectors

Transformer

To order

UEHGHTAppp : MV units according to customerspecificationsUEHGTRppp : transformer according to customerspecificationsUEHGACCppp: security accessories kit


12/164




Presentation of the kitThe LV switchboard or the energy management switchboard enables:

@ the distribution and control of electric power on a real installation, @ the performance of enabling tasks with an intervention on a busbar, @ the performance of measurements (I, U, P, S, Q...), @ discover the different industrial technologies used in a low voltage

switchboard (inverter, power meter, UPS, automation, load shedding...), @ organize and manage a site, @ modify an installation (add one or more starters), @ compensate for reactive energy.

This offer is available in 3 versions:

@ standard version MD1AA730PE : _ a normal power supply (through the network) and a power supply

backup (through a second network or generating set), _ two fuse disconnectors and isolation components with 100 A visible load

break switch,

_ two inverter circuit breakers from the motorized source, equipped withan adjustable differential relay, _ a remote automated remote control integrated with an inverter, allowing

the transfer of sources according to a configurable sequence to ensurethe continuity of optimum service (BA module),

_ two Powerclip busbars, _ two RCP phase control relays and a RCU voltage control relay, _ four pre-wired starters: a loadable 4-pole 63 A, a 3-pole 32 A, a rippled

single pole 4 A to power the supervisor, _ a Premium PLC (PL7 or Unity version) with web server coupler and

developed html pages that enable remote supervision and control. _ a 1 kVA inverter.

@ version according to customer specifications UEHGTGBT: _ a normal inverter/motorized backup on the busbar, _ a set of starters and necessary protections upon customer specification

(size, possible engine...), _ a power meter, _ a recovery system of the power factor, _ a Twido, Micro, Premium or M340 PLC ensure the centralization of

information through a Modbus and/or Ethernet connection, _ a human-machine terminal with touchscreen to configure or view the

condition of the installation, _ Supervision software (optional), _ an inverter (optional).

@ Energy management switchboard version according to customerspecifications UEHGTGE :

_ a normal inverter/motorized backup on the busbar, _ a set of starters and necessary protections to be specified by customer

(size, possible engine) associated with the new range of energy meters

and Acti 9 and Acti 9 Smartlink modular devices, _ a iRio PLC linked to its software (optional reading of information on a

tablet or smartphone), _ a recovery system of the power factor.

Communicating LV switchboardEnergy management switchboard

High and low voltage electrical distribution.management

low voltage switchboard according to customer specifications Controller module of the energy management switchboard


Energy distribution

@ To supply the terminal, industrial and smallservice industry applications with electricenergy.

@ To manage energy: tariff control andcontinuity of power supply.

Communicate @ To interact with the industrial or small

service industry terminal applications(production systems, heating, lighting, fire,intrusion).

@ To process the PLC and buildinginformation.

@ To centralize the alarms and faults onthe operator terminal, PC or a web server

according to the version. @ To supervise and remotely control the

production through an operator terminal,PC, tablet, or web server according to theversion.

Launch and maintain @ To launch and maintain an operation. @ To perform the measurements.

Safety @ To train and assess the electrical skills of

the students. @ To analyze the professional risks.


@ Power supply:400 V three-phase + Neutral + Earth

@ Dimensions (H x L x D) - weight:2500 x 1400 x 550 mm - 260 kg

Principal industries @ Electrotechnical engineering


13/164


Cabinets capable of being linked to the low voltage switchboard

The heating cabinet UEHGAA665CH consists of: @ Prisma Plus enclosure equipped with a transparent door, @ a 4-pole 32 A general switch, @ Bipolar circuit breakers equipped with auxiliary contacts, @ A communication interface with the low voltage switchboard or the

Energy Management Panel, @ heating management through the KNX bus.

The lighting cabinet UEHGAA665ECL consists of: @ Prisma Plus enclosure equipped with a transparent door, @ a 4-pole 32 A general switch, @ three 4-pole circuit breakers for the protection of the different lighting

circuits, @ a bipolar circuit breaker that protects the power supply and the outputs

from the PLC or the communication device with the energy managementpanel,

@ ten bipolar circuit breakers for the protection of the different lighting

circuits, @ ten bipolar remote switches enabling the launch of the lighting zones. @ a Twido PLC for the remote management of the lighting zones through

the Modbus/Ethernet network (if Twido) or ZigBee (if energy managementpanel),

@ a junction box to the Modbus network (if Modbus network is used), @ the terminal blocks and junction splitters to the different lighting circuits.

The Twido or Micro interface box UEHGAA665INT consists of: @ an enclosure equipped with a transparent door, @ a remote controlled iC60 Reflex type 4-pole circuit breaker, @ a bipolar circuit breaker that protects the power supply of the PLC, @ a Twido or Micro PLC enabling the remote launching of a system through

the Modbus/Ethernet network (only for the TGBT),

A measurement kit MDGIRIOME can be proposed to reduce theinformation of the systems to be connected to the energy managementpanel (power, ZigBee communication module and energy meters to beinstalled in the system).

Each low voltage switchboard/energy management panel comes withthe RT 2012 guide "Analysis and Solutions" along with a white leaflet onenergy efficiency.

To order

MD1AA730PE: Standard version low voltage switchboardMD1AA739: compensation cabinet for the standard versionUEHGTGBT: low voltage switchboard according tocustomer specificationsUEHGTGE: energy management switchboard according to

customer specificationsUEHGAA665ECL: lighting boxUEHGAA665CH: KNX heating boxUEHGAA665INT: Interface boxMDGIRIOME: measurement kit

Low voltage switchboard (standard)

Heating box Lighting box


14/164




Un-wired rear face

Package descriptionThis cabinet is used to:

@ perform cabling and accreditation tasks with intervention on busbars, @ take measurements (intensity, simple and composite voltages, active,

reactive and apparent power, power factor and phase order), @ take measurements using an oscilloscope and hook-on ammeter, @ distribute electrical energy on 6 separate feeders.

It can be supplied in a mounted, non-cabled version delivered with anaccessories kit to carry out cabling operations.Proposed as an option:

@ accessories batch (wires, tags, cable ends and sheaths), @ tooling batch (screwdriver, clamps, allen keys).

In the workshop, the cabinet will be used to supply: @ systems separately, @ the spatial production area (3D cells), @ the panel-builder’s workstations,

@ a lighting area, @ the cabinet cabling stations, @ the “study” zone with the microcomputers.

LV switchboard for professionalschool teaching

To order

MD1AA720 : cabled LV switchboardMD1AA720NC : non-cabled LV switchboardMD1AA728 : accessories kitMD1AA728P4 : accessories kit (Q = 4)MD1AA729 : tool kit

Teaching Objectives

@ To study the hardware of a mainswitchboard.

@ To control distribution. @ To manage energy.

Electrical andmechanical data

@ Power supply:400 V 3-Ph + ground

@ Size (H x W x D) - weight:2310 x 1000 x 530 mm - 214 kg

Main industry @ Electrotechnical engineering

This cabinet contains: @ a main power supply, @ a residual current device at the head and a

switch-disconnector with visible breaking, @ a busbar, @ a measurement unit equipped with a

configurable alarm device, @ an emergency stop device on the cabinet

and the possibility of remote installation of atleast one other emergency stop point,

@ feeder control using ON/OFF pushbutton+ indication,

@ connection of power supplies and feeders at

the back of the cabinet, @ cabinet access from the front and back (forexercises and accreditation),

@ a light beacon at the top to indicate power on, @ safety devices conform to current standards.


15/164


IT system cabinet and secondarydistribution boards

To orderMD1AA700TIT : IT system cabinetMD1AA700TDS : industrial distribution boardMD1AA700TDT : tertiary distribution board

IT system cabinet

Package descriptionIT system cabinetThis equipment is an electrical distribution cabinet equipped with fourcastors.It is used to demonstrate, through an IT isolated operation system, theprinciple of continuity of service for an installation as well as associatedmaintenance methods.

It includes: @ a 400 V/230-400 V 10 kVA three-phase transformer allowing an IT type

earthing system (neutral isolated from earth) to be created,@ three-phase feeders protected by 10 A circuit breakers, for connectingvarious other devices,

@ a TR22 permanent insulation monitor (PIM), to cover the principle ofcontinuity of service of an installation as well as maintenance methods.

The tertiary and industrial distribution boards are Prisma Plus modularswitchgear enclosures.

Each enclosure is equipped with a master switch with external lock.

The industrial distribution board is equipped with two 2-pole circuit breakersand four 3-pole circuit breakers, to protect the power supply of industrialsystems (machines, operating parts, etc.).

The tertiary distribution board is equipped with six 2-pole circuit breakersto protect the power supply of tertiary systems (lighting, sockets etc.).

These three cabinets (IT cabinet, industrial and tertiary distribution boards)are equipped with a Twido PLC centralising the state of the different feedersthrough the circuit breakers (open, closed or tripped).This information can then be sent to a concentrator PLC in a main LVswitchboard via the Ethernet network.

Teaching Objectives

@ To be used with the teaching LVswitchboards to explore the differentworkshop architectures.

@ To create an IT isolated operation system. @ To have additional electrical distribution

feeders. @ To exchange information by Ethernet. @ To create the links with a networked LV

switchboard cabinet.

Electrical andmechanical dataIT system enclosure

@ Power supply:400 V three-phase + neutral + ground /


16/164




Presentation of the kitThe isolated neutral is the solution ensuring the best continuity of service inoperation. For this reason, on can find the IT earthing diagram in hospitals(particularly in surgery rooms), the electric grids of airport runways, inmines and premises where there is a risk of fires or explosions, on boatsand in all industries where a stoppage of operation would be costly ordangerous.

@ The IT cabinet system is made of a Prisma P type cabinet. @ The equipment for improved service continuity consists of a source

inverter (EDF source no. 1 and EDF no. 2) enabling the simulation of aloss of voltage along the "normal" source with automatic switching to the"emergency" source.

@ The cabinet can be equipped with an optional three-phase inverter with abattery life of 10 min.

@ The system is equipped with a 400 V/400 V transformer with a 10 kVAdelta/star connection.

@ The cabinet is equipped with six feeders for the protection of electronic

circuits. @ A permanent insulation monitor communicating with automatic

fault search along the 6 feeders enables the recovery of the availableinformation under supervision.

@ Each feeder is equipped with a terminal plate for the measurement ofcurrent and voltage.

@ Screen printing representing the electrical diagram of the cabinet withmeasuring points for a short circuit current and the potential contactvoltage.

@ A system of fault simulation is provided on 5 feeders. The selection of thefeeder is performed using a switch.

@ A simulation system of the second fault with a limitation of the short-circuit(simulation of two types of faults: short-circuit and leakage current).

IT system with fault search


IT system cabinet


@ To present and discover the system(research and analysis).

@ To remind the E.D. (earthing diagram) @ To launch the IT system (in conformity with

NF C 15-100). @ To connect a feeder to the system. @ To search for an isolation fault. @ To connect a differential to a feeder. @ To configure an insulation monitoring

device. @ To configure the communicating systems. @ To communicate with an ETG100 module. @ To use monitoring software (optional).

Electrical and mechanical

features @ Power supply:

400 V three-phase + Neutral + Earth


Principal industries @ Electrotechnical engineering

Other industries concerned @ Electrical engineering @ Industrial science and technology

industries


17/164


List practical exercises provided: @ Practical exercise 1: presentation and discovery of the system (research

and analysis),

@ Practical exercise 2: Reminder on the E.D. (earthing diagrams), @ Practical exercise 3: the commissioning of the IT system (in conformity

with NF C 15-100), @ Practical exercise 4: connection of a feeder to the system (measurement), @ Practical exercise 5: find an isolation fault without the "locator" (use

measuring devices), @ Practical exercise 6: find an isolation fault with the "locator", @ Practical exercise 7: installation analysis upon the occurrence of a

second fault, @ Practical exercise 8: connecting a differential to a feeder, @ Practical exercise 9: configuring an insulation monitoring device@ Practical exercise 10: configuration of the communicating systems(Ethernet, Jbus),

@ Practical exercise 11: communication with the ETG100 module (use ofthe communication page). Use of monitoring software (communication with

the XLI module through the ethernet fieldbus gateway) to verify the differentaddresses of defects and settings.

Comments: @ The practical exercises include the "answer" documents for the students

and correction for the teacher, @ the monitoring software is not included in the offer, @ the measuring equipment software is not included in the offer, @ the cables necessary for the use of the installation are included.

To order

MD1AA710: IT system cabinetMD1AA719: an optional inverter

Practical exercise 6: student document

Practical exercise 6: teacher's document


18/164


19/164


Protection discrimination bench

Package descriptionThe training bench for studying discrimination between protective devicesin low voltage distribution systems demonstrates the notions of current andtime discrimination.

It promotes understanding of: @ how to use an adjustable residual current relay with separate current

transformer, @ the causes and effects of short-circuit currents, how to calculate them

and select the appropriate protection, @ the operating principles and characteristics of a thermal magnetic circuit

breaker, @ using and tracing a tripping curve for a given rating, @ the simulation of situations of total discrimination, partial discrimination

and non-discrimination, @ the study of the notions of discrimination on 2 or 3 stages and their

consequences and effects on an installation, @ the choice of earth fault loop impedance by induction coils of controllable

values, @ the simplified presentation of breaking by a very low voltage electric arc

and limitation of short-circuit current.

To orderMDG99610 : discrimination bench

Teaching objectives

@ To understand how thermal magneticcircuit-breakers work (tripping curves andbreaking capacity).

@ To implement discrimination betweenupstream and downstream protection.

@ To understand the causes and effects ofshort-circuit currents.


@ Power supply:230 V single phase + ground /


20/164




Qualification test-bench

Presentation of the packageThis bench was developed by Schneider Electric to prepare for thecertification of non- technicians, following the development of standardNF C 18-510.It consists of a service industry side and an industrial side, all mounted on achassis with wheels.There are two versions: bulk (an already assembled chassis) or cablemounted.It enables training regarding electrical hazards on LV works or installations(BC, BR, BS, BE, B0V, B1N, B1T, B1V, B2N, B2T and B2V accreditations).

OperationThis equipment is composed of the two sides:

@ the housing-service side allows for simple electrical operations;intervention regarding a socket, bulbs and Block Autonomous SecurityLighting… This side is equipped with a residential service duct and an EDFmounting plate and modular enclosure,

@

the industrial side, which enables work on the exposed parts with voltage(by removing the cover of the distributor), consists of: @ a motor starter box for operation in two directions with a control box, @ an electric motor driving a ball screw that operates two limit switches.

This bench enables : @ a connection intervention in the vicinity of the voltage, @ settings and measurement interventions, @ connection and replacement interventions, @ interventions due to a defect on a control and power circuit, @ the commissioning of equipment.

Comments : @ the cable mounted version is fully assembled and ready to use, @ the bench in both versions is provided without educational support,

@ A VOM and PPE version is ordered under the reference numberMD1AA639, @ engine and drive version is available.

To orderMD1AAHABILAV: motor qualification bench and cabledball screwMD1AAHABILAVNC: motor qualification bench and non-

cabled ball screwMD1AAHABIL: motor qualification bench and cabled driveMD1AAHABILNC: motor qualification bench and non-cabled driveMD1AA639: VOM and PPE batch

Industrial side Housing-service side


@ To understand and identify electricalhazards by non-electricians.

@ To constitute B0, B1, BR, BS and BEinterventions.


@ Power supply:400 V tree-phase


Principal industry concerned @ Electrical engineering

Other industries concerned @ Building industry


21/164


Kneader Automated systemcontrol desk

Package descriptionThis industrial equipment is designed for applying the regulations,procedures and work methods to qualify for a certificate in electricalhazards skills in compliance with European Community regulations.Based on an industrial kneader model, the equipment is used to study atypical technical system in the food industry implementing a process whichmay require uninterrupted operation.

Main cabinet with control boxMounted on an aluminium rail structure with wheels and stabiliser feet, itincludes:

@ externally controlled padlocking isolator, padlocking circuit breaker, @ power distribution by busbars protected by a removable screen, @ 24 V AC control and signal circuits, @ three padlocking starter units: _ blade motor starter (Altivar speed controller backed up by a

single-phase UPS), _ cover motor starter (reversing contactor),

_ heating starter unit, @ freestanding for mounting and wiring an extra circuit.

Kneader operating sectionThis small-scale industrial kneader is designed for maintenance operations(sensor adjustment, motor terminal verification) and develops a torque of3.64Nm at full load.The kneader includes:

@ a device to open and close the tub lid, @ a kneading blade, @ heating by electrical elements, @ sensors and detectors required for operation, @ two 90 W motors, (blade rotation and lid opening).

PLC panelThis is equipped with:

@ Magelis operator dialogue panel, @ a TSX Micro (TSX37-22) or M340 PLC for kneader speed and ingredient

heating cycle control.

NV and PPE kitOptional kit with a multimeter (NV), padlocking device, beacon, toolsand personal protection equipment (PPE) (gloves, face guard) to work incompliance with safety standards.

Habilis system

Enclosure

To order

MD1AA513 : cabinet and control boxMD1AA514 : kneader operating sectionMD1AA516 : TSX Micro control deskMD1AA518 : NV and PPE kitMD1AA516MR : M340 control desk

Teaching objectives

@ To undertake practical exercises relatingto tasks requiring electrical skills andcomplying with UTE C 18-510 regulations.

@ To understand the problems of padlockingin industrial systems.

@ To carry out maintenance and repairoperations in the electrical cabinet.

@ To study an industrial system.


@ Power supply:400 V DC 3-phase + neutral + ground / 1 kVA

@ Size (H x W x D) - weight: _ main cabinet:

2060 x 900 x 650 mm - 165 kg _ operating section:

600 x 600 x 600 mm - 43 kg _ PLC panel:

1150 x 340 x 430 mm - 15 kg

Main industry @ Electrical engineering

Other industry @ Mechanical engineering


22/164




Valhabilis

Presentation of the kitThis system consists of two complimentary cases, representing anelectrical installation. They allow to tackle electrical hazard issues for thenon-electrotechnical courses.

The first case contains three outputs that are provided with mesuringoperations, connections and bulb replacement.

The second case supplied by the first one allows the implementation ofcontrols and electrical maintenance using a motor starter.

An optional kit contains a non-voltage multimeter (VOM), a logging device,and PPE (Personal Protective Equipment) - insulating gloves and a faceguard - can be used to perform operations in compliance with the relevantsecurity standards.

Additional electrical certification caseFor the Habilis system

Presentation of the kitABS case containing:

@ a cable gland plate protected by a 10 A circuit breaker that can bereplaced by a 2P + Earth,

@ a lighting output protected by a 10 A fuse, @ A socket for bulb replacement.

A set of five 2P + Earth sockets, a bulb, fuses and two logging devices issupplied separately.

Comment:This case be added to the Valhabilis MD1AA630 cases available already onthe market, the Habilis system and can also be used alone independently.

To orderMD1AA630: ValhabilisMD1AA639: Batch VOM and PPEMD1AG630: Valhabilis with batch VOM and PPE


@ To train for level B0, B1, BE, BS, B1V andBR operations following the newNF C 18-510 standard.

@ To perform basic tasks at low voltage.


@ Power supply:230 V single phase, 10 A

@ Dimensions (H x L x D) - weight: _ Electricity distribution case:

450 x 460 x 290 mm - 10 kg _ Motor starter case:

450 x 460 x 290 mm - 12.5 kg

Principal sector concerned @ Mechanical engineering

Other industries concerned @ Civil engineering

@ Industrial technology


@ To perform the certification tasks of theBS, B0 and BH level with the Habilis system,following the new NF C 18-510 standard.

@ To implement routine operations on low

voltage installations.


@ Power supply:230 V single phase + Earth

@ Dimensions (H x L x D) - weight:230 x 300 x 120 mm - 2.5 kg(without mounted bulb)

Principal industries concerned @ Electrical engineering @ Thermal and HVAC engineering

To orderMD1AA638: BS certification case for Habilis


23/164


24/164

22

Building management


25/164


Building management

Residential and small service industry offer ......................................................................24

KNX modular offer ................ ................ ................ ................ ................ ................ ................ .............. 26

KNX casen ................ ................ ................ ................ ................ ................ ................ ................ .............. 27

KNX paneln .............. ................ ................ ................ ................ ................ ................ ................. ............. 28

Minibat, instructional mini buildingn .....................................................................................29

KNX pack .............. ................. ................ ................ ................ ................ ................ ................ ................ ... 30

Odace radio frequency discovery kitn .................................................................................31

Alvidis case ................ ................ ................ ................ ................ ................ ................ ................ .............. 32

Addressable fire security benchn ...........................................................................................33

VDI 19’’ pack ............... ................. ................ ................ ................ ................ ................ ................ ........... 34

BAES Dardo Plus casen ............... ................ ................ ................ ................ ................ ................ ... 35

HD network camera, PELCO security imaging packn ................................................. 36

Modular offer and kit for the modeling and prototypingn ....................................... 37

Instruction of the energy efficiency of buildingsn ........................................................38

Energy management solutions applied to residence

and small industry areasn .............. ................ ................ ................ ................ ................ .............. 39





26/164


Building management


Presentation of the entire modular offerThe residential and small service industry modular offer allows you to studyand install the components of an electrical installation for the residentialand small service industry.The offer contains the most commonly used products in the home, adaptedfor training purposes in box kit form.Three different training kits are available for learning and using the mainfunctions encountered when building electrical installations.

These kits are of increasing complexity and complement each other: @ the first kit allows you to create the functions encountered in 1 or 2-room

housing, @ the second kit, made up of products supplementary to the first, is used to

demonstrate the functions encountered in 3-4 room housing, @ the third kit, also made up of products supplementary to the first two,

covers the main functions encountered in a small service industry building.

Residential and small service industrypack offer

description 1 or 2 rooms 3 ou 4 rooms small service

industry

reference

MD1AM6121 MD1AM6122 MD1AM6123

DB90 500 mA circuit breaker

panel module with tariff meter

1 MD1AM6001

1P+N 10 A circuit breaker

module - 20725

3 1 1 MD1AM6002

1P+N 16 A circuit breakermodule - 20726

1 1 4 MD1AM6003

RCD module1P+N 16 A /30 mA - 20553

2 2 MD1AM6004

RCD module

1P+N 20 A /30 mA - 20554

1 MD1AM6005

impulse relay module with built-in

function 16 A, 230 V AC - 15518

1 MD1AM6006

impulse relay module with centralcontrol - 15510+15409

1 MD1AM6007

programmable time switch

module - CCT16652

1 MD1AM6008

modular contactor module2F 25 A - 15379

1 4 MD1AM6009

Min'clic 1 - 7mm time-delay switch

module, 16 A, 230 V AC - 16655

2 MD1AM6010

switch-off warning module - 15376 1 MD1AM6011

light-sensitive switchmodule type IC200 - 15284

1 MD1AM6012

CDS single-phase load-shedding

contactor, 1 channel - 15908

1 MD1AM6013

Alcyon 2-way switch - ALB74020 5 2 MD1AM6014

Alcyon single pushbutton - ALB74030 6 MD1AM6015

Alcyon simple illuminated pushbutton

module - ALB74035

3 MD1AM6016

Alcyon double pushbutton

module - ABL74080

1 MD1AM6017

Alcyon 10/16 A socket module, 2P+E 4 2 MD1AM6018

15 W bulb holder module 4 5 MD1AMP004

support frame 1 1 1 MD1AM000

For ease of use, each component is built into a box where each connectionis made using safety sockets.

Incoming circuit breaker Circuit breaker and Vigi

Teaching objectives

@ To study and install the componentsof a domestic and small service industryelectrical installation.


@ Power supply:230 V 50 Hz / < 15 A

@ Dimensions of storage boxes(H x W x D) - weight:470 x 430 x 250 mm - 20 kg

Main industry @ Civil engineering

Other industry @ Electrical engineering


27/164


Presentation of the pack contentsThis pack is designed for studying, installing and wiring the components ofan electrical installation for the residential and small service industry.

quantity description reference

1 Opale switchboard for circuit breaker 13217

1 Opale switchboard with 3 rows of 13 modules 13403

1 incoming circuit breaker 13120

1 tariff meter C 1000

5 10 A circuit breaker 20725

6 16 A circuit breaker 20726

4 30 mA, 16 A residual current circuit breaker 20553

2 30mA, 20 A residual current circuit breaker 20554

1 16 A, 230 V AC impulse relay with built-in function 15518

1 impulse relay 15510

1 impulse relay auxil iary (15510) for central ised control 15409

1 programmable timer switch CCT16652

5 25 A 2-pole contactor 15379

2 time-delay switch 15363

1 switch-off warning 15376

1 light-sensitive switch 16652

1 load-shedding device 15908

7 Alombard 2-way switch ALB74020

6 Alombard pushbutton ALB74030

3 Alombard illuminated pushbutton ALB74035

1 Alombard double pushbutton ALB74080

6 Alombard socket 2P + E 10/16 A ALB74200

50 Alombard blue flush-mounting box ALB71320

10 Alombard central socket box kit ALB71837

10 E27 plug socket ALB68010

Overview

To orderMDG99120 : residential and small service industry pack

MD1AM6121 : 1 to 2-room housing training kit with supportframeMD1AM6122 : 3 to 4-room training kit with support frameMD1AM6123 : small service industry kit with support frameMD1AM6126 : all kits MD1AM6121 to MD1AM6123

Residential and small service industry pack

2-way switch


28/164


Building management


Package descriptionThe KNX bench and kits are used to demonstrate the latest intelligenthome solutions:

@ building management, @ utility management and control.

The kits are made up of the most currently used KNX products.These components are adapted for training purposes in box kit forminstalled on an aluminium rail.

The products included in the kit are used to perform functions such as: @ control of roller blinds, @ control and dimming of lighting, @ control of actuators from pushbuttons.

Products comprising the basic bench MD1AM3BA

description bespoke reference

bus power supply module MD1AM3001

system coupler module MD1AM3002

switch actuator module with 4 outputs MD1AM3003module with 4 binary inputs 230 V MD1AM3004

dimming actuator module MD1AM3005

programmable timer module MD1AM3006

USB interface module MD1AM3007

roller blind actuator module MD1AM3008

Artec dual control module for white roller blind MD1AM3009

Artec 8-key multifunctional module with IR + faceplate MD1AM3010

Artec 4-key multifunctional module + faceplate MD1AM3011

trancent touch-sensitive control module MD1AM3012

complete movement detector module + faceplate MD1AM3013

interior presence detector module MD1AM3014

module with 2 binary inputs MD1AM3015

support frame MD1AM000

two 15 W bulb holders MD1AMP004

electric roller blind MD1AMP007

single-phase protection module MD1AM2001

USB2 programming cable -

ETS Pro software -

five ETS Trainee licences -

Other modules, not included in the basic bench, are also available.

KNX modular offer

Overview

Output module

Switch

To orderMD1AM3BA: KNX bench

All these elements are interconnected by theKonnex bus which complies with the internationalISO/IEC 14 543-3 standard.Functions are configured using ETS 3 software(included in the kit) installed on a PC.This equipment is designed for studying andinstalling KNX products.

Teaching objectives

@ To analyse the functions and principles ofa home automation installation on Konnexbus.

@ To wire the components. @ To configure the system based on different

scenarios.

Electrical and mechanical data @ Power supply:

230 V single phase + E / 200 VA

@ Size (H x W x D) - weight:780 x 650 x 1200 mm - 50 kg

Main industries @ Electrotechnical engineering, energy,

home automation

Other industry @ Electronics


29/164


Presentation of the kitThis case enables the study and implement the components of an electricalinstallation for a building industry and small commercial establishment,taking into account the economic and energy management aspects raisedby the use of KNX bus system components.

This case consists of: @ An on-off lighting control actuator module, @ A lighting variation module, @ a module for a rolling shutter, @ a USB interface module, @ a TCP interface module.

The diagram of this case represents an apartment. The rolling shutter issimulated by LEDs.

Operation: @ programming use of ETS 4 software via a USB or TCP interface, @ realization of on-off lighting control with white LEDs,

@ variation of the control of a 15W bulb, @ implementation of centralized control, @ control of the electric rolling shutter.

CommentsProvided with ETS 4 Lite software.Case comes with technical documentation, without educational support.

KNX case

To orderMD1AVKNX: KNX case


@ To understand and master the control

functions of the lighting and rolling shutterswith the KNX bus.

@ To master the ETS 4 software tool for thedesign and commissioning of a KNX project.

@ To optimize energy consumption throughthe use of suitable products.


@ Power supply:230 V single phase


Principal industries @ Energy and environment technical high

school @ High school engineering science

Other industries concerned @ Electro-technical industry @ Maintenance industry


30/164


Building management


Presentation of the kitThis equipment is made up of two educational panels with junctionconnectors and cards for a 230 V power supply and KNX bus.

@ The main panel represents a conference room that assemble applicationsinvolving lighting, access control and heating (radiator optional). It includes:

name

DT40N 1P 10A curve C 6kA

Opale enclosure, 2 rows

USB-DIN interface

8 aluminum M-PLAN push buttons

2 simple aluminum plates

M Plan interior motion detector

Actuator 2X230V 10A

DALI gateway with web server

power supply for 160mA bus

Actuator 2X230V 16A

4 X aluminum ARTEC multifunction pushbutton

power supply CC 24V 0.4AIP router

dimming actuator for light bulb

module for aluminum push button

M-Plan simple aluminum plate

electric keypad latch

set of Halogen, compact fluorescent and LED lights

@ The panel application "sun tracking"(1) representing a relaxation area.It includes:

name

electric Venetian blinds with adjustable strips

blinds actuator 2X 10A

module for the 2 M-PLAN push buttons

aluminum M-PLAN double handle

simple M-PLAN aluminum plate

multifunction weather station

Actuator 2X230V 16A

aluminum ARTEC multifunction pushbutton

simple ARTEC aluminum plate

DT40N 1P 16A curve C 6kA

Opale enclosure, 1 row

interior motion detector

(1) Cannot work except by connection with the preceding panel.

Possibility to develop tablet applications.

KNX panel

To orderMDG99DOMKNX: a complete set of 2 panels comes with a

ETS4 Lite license dongle.MDG99DOMKNXLITE: the access control-lightingapplication panel comes with a ETS4 Lite license dongle.MD1AMP010: Educational radiator 2kWNon contractual photos.

Venetian blinds management panel

Lighting and control access control panel

Educational radiator


@ To understand the building managementand the optimal management of energy.

@ To implement scenarios similar to a realcontext.

@ To introduce to ETS4 programming.


@ Power supply:230 V single phase + Earth

@ Dimensions (H x L x D) - weight:Dimensions 400 x 600 x 250 mm - 20 kg

Principal industries

@ Energy and environment engineering

Other industries concerned @ Electrical engineering @ Civil engineering


31/164


Presentation of the kitMINIBAT is the mini instructional building that provides an example ofenergy management through the regulation of temperature and lighting.This system enables the discovery, design and implementation of anautomated system (heating, lighting, control of motorized opening,access control) where the management and control is done via the KNXbus, standard compatibility and unique interoperability in the areas ofautomation and technical management of the building.

The system enables: @ the discovery of the features and implementation of the operating

components on the KNX bus, @ concept discoveries in addressing different equipment (physical

addressing of the participants), @ configuration implementation, via the ETS4 software, of the system's

components.

Minibat is composed of two 2 zones:

@ zone 1: light control with halogen spotlights, rolling shutters, presencedetector, light dimmer switch... @ zone 2: thermal regulation of theradiator, fan, timer, and temperature

sensor...

Minibat is controlled using a 7 inch touchscreen.A TCP/IP interface enabling remote control using a PC or a tablet.

MinibatInstructional mini building

To orderMDG993EB: instructional mini building


@ To understand the concepts of energyefficiency.

@ To optimize energy consumption throughaction relating to lighting and heating.

@ To configure an installation for the purposeof the optimization of energy consumption.

@ To control in an automated manner thenecessary lighting and heating.




Principal industries @ Energy and environment engineering @ Electrotechnical engineering @ Digital Electronic Systems engineering

Other industries concerned @ Electrotechnical engineering @ Electrical Engineering and Computer

Science


32/164


Building management


Presentation of the kitKNX solutions are based on a communication bus that is only to beinstalled in parallel with the power line to serve both the user interfaces(push buttons, control station, touch screens), but also the sensors andactuators will turn the building into a performing building.Among the industries where it is common to find such solutions that wemay include administrative buildings and service industries, commercialbuildings, schools, sports and cultural complexes, hospitals and long termcare residences, hotel resorts and upscale residences.The most common applications addressed by KNX solutions are lighting,heating, ventilation, air conditioning, control of openings (shutters androlling awnings), taking into account time management zone, the presenceof an occupant , the weather and interfacing with the most popularnetworks on the market (TCP-IP, for example).

The MD1AAKNXVR educational pack enables the discovery of the KNXsystem.Its 7 inch touch screen and specific actuator for the roller shutters or

Venetian blinds can, among other things, enable an understanding of all ofthe features of KNX bus and address the principles of energy efficiency.

It includes:

name

KNX 320 mA power supply

USB interface

IP router

2 M-PLAN push buttons

DBL H-B M-PLAN plate

M-PLAN aluminium finishing plate

8 aluminum ARTEC push buttons

interior motion detector + infrared

7" screen

white embellishment kit

exterior white embellishmentswitch actuator, 4x230V-16A

dimming actuator, 4x150W

1 set of cable connectors

1 DALI gateway

rolling shutter actuator

Opale enclosure, 3 rows

Opale transparent door

differential circuit breaker 30mA 10A

2 sets of 2 terminal 8 holes ph-N

@ This package comes with the ETS4 Lite implementation software. @ Rolling Venetian blinds with adjustable strips are optional.

KNX pack

To orderMD1AAKNXVR: KNX packMD1AASTORE: Venetian blindsMD1AAVOLETR: Rolling shutterRolling shutter Venetian blinds


@ To analyze the features and concept of anautomated installation on the Konnex bus.

@ To perform the wiring of the components.@ To implement the system settingsaccording to different scenarios.


Principal industries @ The STI2D diploma. @ Electrical engineering

Other industries concerned @ Energy engineering @ Civil engineering


33/164


Presentation of the kitThe Odace pack is made up of wireless products using RF (radiofrequency) technology. Solutions that are easy to implement enablecentralized control of rolling shutters and/or a wireless two way switch.

This equipment package is composed of the products below:@ A light receiver with dimmer. This RF lighting module allows the remotecontrol of a ceiling lamp and the varying of its intensity

@ Mobile RF outlet with controller. It allows remote control of lamps ordevices that are connected to it.

@ Combined controller without neutral with dimmer. This combinedcontroller is both a transmitter and a receiver. This module is used toreplace an existing switch. The lamp to which it is connected can becontrolled locally or remotely. It is used to control the receivers. It can bemounted either on 2 or 4 poles.

@ Remote control. It allows you to command the various receivers. With 8channels for the standard version. It is connected through programming insimple mode or scenario mode to Odace products.

@ 2 transmitters with centralized control for the roller shutters enable localor remote control with a centralized roller shutter function.

@ 2 battery operated push button transmitters. @ White embellishment kit. @ 4 white Design plates. @ A universal transmitter and receiver.

The transmitter is connected to a push button.The receiver controls the load connected to it.

Odace radio frequencydiscovery kit


@ To understand an apparatus used tocontrol a lighting system or rolling shutterusing RF.

@ To program a transmitter and receiver. @ To discover the benefits of radio frequency

control.


@ Power supply:230 V single phase + batteries (provided)


Principal industry @ Electrical engineering

Other industry concerned @ Home automation

To orderMDG99ODACE: Complet Odace kit

Wireless control

RF receiver Remote control


34/164


Building management


Presentation of the kitAlvidis connects the residential distribution to all media (telephone,television, internet) to RJ45 terminal outlets. This solution is very simple forthe end user: "I connect, it works."

The Alvidis case forwards to: @ discovering different media distribution solutions in a dwelling, @ study and implemention of telephone, computer and television solutions

on RJ45 sockets based on concrete specifications.

It is equiped with an IP camera enabling the development of network andremote access using internet.

The automatic Alvidis case consists of: @ an 8 port automatic Alvidis, @ two RJ45 sockets on supports, @ a 4 + 1 port switch module, @ an ITD (end of the line), @ a tripler,

@ a telephone filter, @ an IP camera, @ the cables to connect a telephone, television and a PC.

Alvidis case


@ To analyze and implement differentmedia distribution solutions in a residentialenvironment or small business.

@ To implement the system settings indifferent scenarios.

@ To study and configure an IP camera.


@ Power supply:230 V single phase + Earth / < 150 VA

@ Dimensions (H x L x D) - weight:503 x 602 x 195 mm - approximately 14 kg

Principal industry @ Home automation @ Electronics

Other industry concerned @ Electro-technical

To orderMD1ALVIDISA: Alvidis case


35/164


Presentation of the kitThis teaching equipment "Addressable Fire Security System" consistsof a monoblock mobile structure. On the front is shown a portion of anestablishment that receives the public (e.g.: a summer camp).It includes the various required components:

@ to take into account the information (automatic detectors and manualreleases),

@ to process informations (equipment control, signaling and reportingchart),

@ to manage alarms and security settings (siren and centralizing of the firesafety setting with the safety actuated device)These components are located in different parts of the representedbuilding.

All connections are found on the secure sockets enabling fast quick wiringwithout tools.The set of components on the equipment meets current standards in force.

OperationFour practical exercises are offered:@ Practical exercise 1: Implementation and recording

@ Practical exercise 2: Use of a fire security system, @ Practical exercise 3: Configuration of a fire security system (local mode), @ Practical exercise 4: Configuration of a fire security system (remote

mode).

Addressable fire security bench

To orderMDG99130A: Addressable fire security bench


@ To study a fire security system. @ To study and implement the standards and

regulations relating to fire safety system. @ To cable, configure and program of the

controling and signaling equipment. @ To do preventive maintenance of the

system components. @ To do corrective maintenance of the system.



@ Dimensions (H x L x D) - weight:1930 x 600 x 1070 mm - approximately93 kg

Principal industries @ Electronic engineering @ Electrotechnical engineering

Other industry concerned @ Electrical engineering


36/164


Building management


Presentation of the kitThe VDI 19’’ pack highlights the general organization of a VDI network.It enables the discovery of the functions of the components (splitters, PBX,inverter, switch), the principles and standards to implement the variouscables used in VDI, cabling of the RJ45 connectors, and the cabling andwiring of a patch bay. The pedagogy is based on actual specifications.

VDI 19’’ pack: MD1ALVDIC 19

quantity name

24 FUTP cable, Cat 6 300MHZ 1 m

1 19" panel, 24 points

1 telecom panel, 50 ports 1U

1 panel with 8 outlets with illuminated switch 1U

1 shelf (1U), 250mm depth (15kg max)

5 blank sealing panel (1U)

3 cable guide panels, 19" 2x1U

24 connecting rings 600x600

1 case, 19" with fixed body, glass door 12U

1 rear sealing panel1 sealing panel with air vents

1 sealing panel with brush strip

1 telecom connection tool

1 sealing shutters, blue

1 sealing shutters, green

1 kit for the grounding of cylindrical lugs

1 inverter, APC Smart-UPS 1500VA USB & Serial RM 2U

1 kit, Rack 2U for inverter

1 Switch, 24 ports, administrator level 2, 10/100

Options of the VDI 19’’ pack: @ a private automatic branch exchange MD1AE849, @ 2 x 4 twisted-pairs cable 500 m, cat 6 VDIA11204SH, @ Optiline duct pack MD1ALOPTILINE includes:

quantity name12 ducts and accessories

4 blocks of 3 outlets 2P+E with mechanical polarizing

4 blocks of 3 outlets 2P+E standard

24 supports for RJ45, blue

24 supports for RJ45, green

24 core, RJ45 slim cat. 6 plated

VDI 19’’ pack


@ To study the VDI functions encountered inindustrial or tertiary installations.

Principal industry @ Electrical engineering

Other industry concerned @ Civil engineering

To order

MD1ALVDIC19: VDI 19” pack

VDI pack


37/164


BAES Dardo Plus caseAddressable security lighting system

To orderMDGVBAES: BAES caseMDGBAESPCK: handheld testerMD1APESADR: BAES product pack delivered separatelyMD1APESPRT: printer option for the pack


@ To study an addressable security lightingsystem.

@ To configure and control remotely by aweb server.

@ To identify and test the systemcomponents.




Principal industries @ Electronic engineering @ Electrotechnical engineering

Presentation of the kit:The addressable system Dardo Plus offers features that go beyond thecentralization/automation of the testing required by the EN 50172 standard.

Easy installation and addressing: @ ease of wiring, @ easy installation in an enclosure or DIN cabinet, @ simple addressing using two rotary knobs on each fixture, @ there is no risk of error with the address testing device (test the

addresses and identify duplicates and missing ones).

Automated and remote testingCentralize and automate the mandatory controls of the security lightinginstallation (in compliance with the EN 50172 standard).Each block is tested according to the addressing plan.Tests without power interruption.Identification of components to replace (test reports).Test report available immediately on a PC, the control unit or printed (Dardo

Plus Printer or office printer).Maintenance alert via e-mail or SMS (DCM interface) or the technicalmanagement system of the building (DLM interface).

This case enables the study of the management of an addressable securitylighting installation of buildings.Fully scalable system, with the possibility of remote monitoring, SMS and/ore-mail alert (optional), direct integration in LON environments.

Includes: @ This case is composed of a Dardo Plus controller, a DCM communication

module, a BAES A-EVAC IP 42 with LED, a fluorescent BAES A-AMBIP 42, a 24 v power supply and a printer for the test reports required bystandard EN 50172,

@ spotlights to simulate real lighting.

Kit offerThis offer is available in a kit consisting of:@ 1 control unit,

@ 1 BAES EVAC IP 42 with LED, @ 1 halogen 12 v spotlight, @ 1 BAES AMB IP 42, fluorescent, @ I DCM communication module @ 1 24 v power supply, @ 1 Dardo Plus Printer.

Comments @ The practical exercises include a student document and a teacher's

document. @ Possible BAES external additions possible.


38/164


Building management


Presentation of the kit @ The extended platform (EP) camera pack is designed for quick

installation. @ The built-in analytics and other advanced features meet the needs of the

most demanding security applications. @ The camera uses a standard web browser for its extended configuration

functions and remote administration. @ The PELCO system of analytical solutions can detect specific types of

activities and automatically trigger alarms. @ Camera sabotage function. @ Movement management, abandoned object, object counting and object

removal. @ The "Adaptive movement" feature of the PELCO system detects and

tracks objects that enter a user-defined zone and can trigger an alarm.

Includes: @ 1 Extended platform (EP) high-definition camera and its adjustable

mounting,

@ 1 13M series varifocal lens for the camera network, @ 1 Mini IP dome camera system and its mounting, @ Freely downloadable DS NVs software including 4 licenses for the

PELCO camera or those of third parties, @ 1 Ethernet switch and the necessary cables for proper functioning.

Benefits: @ use of a PC or screen with an S-video input and BNC + VGA, @ open architecture, @ day/night model equipped with a mechanical infrared filter that increases

sensitivity, @ ability to view up to 4 cameras.

19" monitor option MD1PELCOMONIT: @ LCD TFT PMC319A, 1280x1024 resolution, @ inputs S-Video and BNC + VGA, @ reduced congestion, flat panel design, @ maximum brightness of 380 cd/m2, 500:1 contrast ratio, @ 100 to 240 V single phase power, 50/60 Hz, @ 3 year warranty

Key + power supply option MD1PELCOCLAV: @ key to control the dome, @ automatic detection in CM6700/CM6800 and Direct P modes, @ automatic scanning / random / image.

Outer casing option MD1PELCOEXT: @ EH1512-3MTS case, @ 230 V single phase power supply @ complies with IP 66 & NEMA 4X norms, @ 3 year warranty,

@ comes with its own support.Recorder option MD1PELCOHARD:

@ DSSRV-005-EV recorder, @ up to 8 camera licenses, @ the hardware/software solution is fully scalable with H.264 compression, @ optimization of the pre-installed NV DS software, @ support for the network encoders and IP Pelco cameras or those of third

parties.

HD network camera PELCOsecurity imaging pack


@ To study an IP camera network. @ To turn on and configure the system. @ To highlight the performance of camera

surveillance. @ To perform a back focus of the camera

with the analog output. @ To launch the AutoBackFocus without

going through the web page. @ To launch the ABF by a temperature

change and a day/night transition. @ To set the threshold for switching from day

to night mode from 0.25 to 50 lux. @ To perform the masking of an area.

Electrical and mechanical

features @ Power supply:

Ethernet network or 24 V single phase

@ Dimensions (H x L x D) - weight:camera: 136 x 79 x 85 mm -approximately 0.5 kg

Principal industry @ Technical high school

To order

MD1PELCOPACK1: security imaging camera packMD1PELCOMONIT: monitor optionMD1PELCOCLAV: Key + power supply optionMD1PELCOEXT: Casing and support option IP 66MD1PELCOHARD: Recorder option


39/164


Presentation of the kitThe prototyping and modeling in electrical engineering programs areconcerned by the accurate implementation of technical solutions toimprove energy performance and/or energy efficiency of a system, theimplementation of a wireless network and the transfer of energy or RFIDinformations.

Several solutions are available to meet these needs:@ a Wizer radio frequency pack (see page 44),

@ KNX pack for the optimization of energy consumption (see page 30), @ Energy Efficiency modular offer (see page 46), @ Energy Efficiency modular offer (see page 42), @ Energy Efficiency KNX modular offer (see page 43), @ RFID offer (See pages 106 and 108), @ Telemetering modular offer (see page 45).

Other configurations may be offered to meet the modeling and prototypingneeds (contact your usual supplier).

Modular offers and kits forthe modeling and prototyping

To order

MDG99WISER: Wiser packMD1AAKNXVR: KNX packMD1AMATVEE: Energy efficiency modular offer

MD1AM6130: Energy management modular offerMD1AM3EE: Energy efficiency KNX modular offerMD1AMLRFID: RFID modular offerMD1PACKRFID: RFID packMD1AMLIRIO: Telemetering modular offer

Wiser modular offer

Telemetering modular offerKNX pack


@ To implement technical solutions for theimprovement of energy performance.

@ To respond to a new need by providingmore efficient solutions.

@ To improve the performance of an energychain.

@ To learn the constraints of the RT2012. @ To optimize the management of energy

through the use of a control system.




Principal industry @ STI2D diploma

Other industries concerned @ Thermal and electrical engineering


40/164


Building management


Presentation of the kitThis educational offer is composed of three complementary subsets:

@ The first is a presentation report from the conclusions of the HOMESproject (1). It includes video interviews of experts in the field of energyefficiency and real case studies. From these resources, the teacher mayuse all or part of these materials to implement the course,

@ the second is a set of instructional material solutions that allowmeasurement, real-time storage of consumption and remote access usinga smartphone, tablet or PC:

_ Solution 1: MINIBAT, the mini institutional building that provides anexample of energy management through regulation of heat and lighting(see page 29),

_ Solution 2: modular telemetering energy kit to focus and present localand remote control information on building (see page 45),

_ Solution 3: WISER, a modular energy and comfort management suite inthe residential sector (see page 44).

@ the third is a modeling software. It allows dynamic simulation of thermal

behavior on energy consumption and air quality inside a building inaccordance with current standards (including RT2012). It comes withpredefined templates but also offers the possibility to create new modelingcapabilities.The software takes into account the uses of the building (number ofresidents, schedules, etc.) and the active management of the building(supervision and automation of the equipment).

(1) HOMES is an innovation program in the field of the active energy efficiency on buildings.

Its purpose: "to provide each building with efficient active energy solutions to achieve the bestenergy performance."

Instruction of the energy

efficiency of buildings

Telemetering

Wiser

Minibat

To orderMDG993EBCL: course + softwareMDG993EB: course + MinibatMDG993IRIO: course + telemeteringMDG993WISER: course + Wiser


@ Understand, analyze and master thefundamental principles for overall energymanagement.

@ Understand the concepts of energyefficiency.

@ Know how to optimize energy consumptionthrough the use of tailored solutions.

@ Educate students through case studiesand the use of energy consumptionscorecards.

@ Model different usage cases with buildingsimulation software.

@ Bring attention to the concept of a returnon investment.

Principal industry @ Industrial Science and Technology andSustainable Development high school

Other industries concerned @ Energy engineering @ Civil engineering @ Energy industries of higher education


41/164


42/164

40

Global managementof energy


43/164



Modular offer for residential and small industries energy efficiencyn

............ 42

Energy efficiency KNX modular offern ................................................................................43

Wiser kit, RT2012 applicationn ............... ................ ................ ................ ................. ................ .. 44

iRio telemeter modular offern ................................................................................................. 45

Energy efficiency casen ............... ................ ................ ................ ................ ................ ................ 46

Ventilation system ............... ................ ................ ................ ................. ................ ................ ............. 47

Solar modular offer .............. ................ ................ ................ ................. ................ ................ ............. 48

Instrumented solar panel benchn ......................................................................................... 49

Soleolis: solar panels and wind turbine ..................................................................................50

SolEzy benchn ............... ................ ................. ................ ................ ................ ................ ................ ..... 51

Tube solar water heatern .............. ................. ................ ................ ................ ................ ............. 52

Solar water heater ................ ................ ................ ................ ................. ................ ................ ............. 53

Lubio system ................. ................ ................ ................ ................ ................ ................ ................ ........ 54

Didalub: management of public lighting ............................................................................... 55

Heating control bench ................ ................ ................ ................. ................ ................ ................ ..... 56

Development of the LV switchboard into

the energy management switchboardn ............................................................................57

Compensation of reactive energy bench ............................................................................58

Harmocem: electromagnetic disturbances ......................................................................59

Harmotris: three-phase network harmonic interference bench ............................60

Minharmotris: harmonic interference in three-phase installation .......................61

Load terminals for electric vehiclesn ....................................................................................63

Smart Grid applicationn ............... ................ ................ ................ ................ ................ ................ 64

Photovoltaic installation, isolated and non-isolated siten ....................................... 65

Vizelia offern ............... ................ ................ ................ ................ ................ ................ ................ ........ 66

Energy efficiency case .............. ................ ................ ................. ................ ................ ................ ..... 67





44/164




Example of implementation

Presentation of the kitThe modular offers for residential and small industries energy efficiencyenables to study and implement the components of an electrical installation.Economics aspects and energy management are addressed through theuse of products such as a programmer, dimmer light switch, timer, timedelay switch...

The bench consists of domestic products, the most commonly used,exposed in the boxes.

The energy efficiency modular offer is composed of three informativestudy packages for the discovery, learning and use of the main functionsencountered in the implementation of electrical installations for residentialand small industries (see modular offer and kit in the electrical installationchapter).

The energy efficiency modular offer MD1AM6130 consists of the followingcomponents:

quantity name1 circuit breaker panel module DB90/500mA with tar iff meter

2 circuit breaker module 1P+Neutral 10A

2 circuit breaker module 1P+Neutral 16A

1 Differential switch module 1P+N 16A/30mA

1 Programmable time delay switch module

2 modular contactor module 2F 25A

2 MIN'clic time-delay switch module, 1 to 7mm 16A 230V AC

1 Light dimmer switch module type IC200

1 CDS single-phase load shedding contactor, 1 channel

1 motion detector

1 Room sensor module

1 Thermostat TH4 module

2 ALCYON two way switch

2 ALCYON simple push button

3 light simple push button module

2 Power outlet module 10/16A 2P+E4 Lamp support module 15W

1 Support structure

1 Electric radiator operative part

This offer can be made piece by piece by purchasing the modulesseparately.

Modular offer for residentialand small industries energy efficiency

Load shedding module

Programmable timer module

Light dimmer switch module

To order

MD1AM6130: Energy efficiency modular offer



@ To optimize energy consumption throughthe use of suitable products.



@ Dimensions of the storage boxes(H x L x D) - weight:470 x 430 x 250 mm - 20 kg

Principal industries

@ Electrical engineering @ Civil engineering


45/164


KNX modularenergy efficiency offer

Presentation of the kitThe energy efficiency modular offer using KNX enables the study andimplemention of the components of an electrical installation for thebuilding and service industries, taking into account economic aspects andenergy management through the use of the components of the KNX bus.

The bench and proposed kits are designed for the study and theimplementation of an installation or KNX solutions highlighting:@ the achievement of energy savings,@ optimized comfort for the occupant,

@ an adequate light level for the user, @ a temperature level optimized but modifiable by the user, @ an optimal and automated use of solar intake.

The energy efficiency modular offer MD1AM333 consists of the followingcomponents:

quantity name

1 bus power supply module

1 switch actuator module, 4 outputs

1 4 binary input module, 230 V

1 dimming actuator module

1 Programmable timer module

1 USB interface module

1 TCP/IP interface module

1 4 button Artic multifonction module

schneider electric didactic catalog 2013

Documents