schneider-mita_floor_box_catalogue_2010_se6861.pdf

7/29/2019 SCHNEIDER-Mita_Floor_Box_catalogue_2010_SE6861.pdf

1/12

Mita floor boxesProduct catalogue 2010

Floor outlet boxes British Standard

P117622


2/122

Mitafloor boxes >

+ HighcapacityQuick-FixfunctionPre-wiredoptionsProvisionforRCDprotection


3/123

P117421


4/124

Mita floor outlet boxes British Standard

3and4compartmentfloorboxes

Supplying power and data via raised oor solution oers many advantages

or the modern ofce. Mita oor boxes give you access to power and data

wherever it is required. Both the end-user and the installer can beneft rom

the accessibility.

Strong cover

Lid reinorced

with 3 mmsteel insert

plate

RCD/MCB/RCBOProtection

The 3-compartment

100 and 130 mm box

comes complete with

a plastic cover to

house a RCD/MCB/

RCBO unit, i required.

Flush lid inll

Flush lid inills o linoleum

or brushed stainless steel

are available as optional

accessories.

Cable outlets and lid

The cable outlets are lined with oamed

plastic, preventing dirt rom penetrating

into the box. The lid can be rotated

through 180 degrees to re-position the

cable outlet in the opposite direction

and can be removed in one simple

operation.

Various knockouts

Various knockouts per

compartment or lexible

conduits.

70 mm box - 20 mm100 mm box - 20/25 mm

130 mm box - 20/25 mm

incl. one 32 mm.

Swivel xing(optional)

Metal base box

Base box in three

dierent heights, 70,

100 and 130 mm.

Metal

compartmentdividers

Ensure good

separation o

power and data.

Pre-wired boxes available

Reduce on-site installation

time and avoid wiring

errors. Fully assembled and

actory tested.

Quick x unction

For quick and easy

installation, sel

locking tabs push it

into place to secure

the boxCable retainers(optional)

To hold cables inplace and prevent

them being pulled

out or damaged

between the lid and

trim.

HingeLid will release when

opened in excess o 90

degree angle to prevent

damage to box.

Snap locks

Snap-locks (plastic lid

only) reduce the risk o

cables pushing the lid

open.

Lockable lid

On request.

DIN rail kit and

RCD/MCB/RCBOs

may be purchased

separately.

(3 compartment

70 mm box comes

complete with a

metal blanking

plate.)

P117430

P117436

P117684

P116384

P117826


5/125

Mita floor outlet boxes British Standard

Cable retainers (optional)

To hold cables in place and

prevent them being pulled

out or damaged between

the lid and trim.

Sel-closing

The lid is sel-closing

to minimize the risk o

accidents. When opened in

excess o 90 degrees, the

lid will release.

Cable outlets

The lid has double cable

outlets and can be turned

through 180 degrees.

Lockable lid (optional)

Available pre-it, on

request.

RCD/MCB/RCBO

3-compartment 100 and 130

mm box comes complete

with cover to house a RCD/

MCB/RCBO unit, i required.

DIN rail kit and RCD/MCB/

RCBOs may be purchased

separately.

Carpet/inll recess

In the plastic trim box the

maximum thickness o the

insert material is 6 mm and

in the stainless steel trim

box it is 15 mm.

Installations o raised access foor box with underfoor powertrack and tap-o units

A convenient and lexible solution or power distribution in premises where raised access loors have been installed.

High capacity

Three or our plates, with

metal compartment dividers

or good separation o

power and data.

Quick-x unction

For quick and easy

installa-tion, sel-locking

tabs push-it into place to

secure the box, eective in

all loor types. No tools are

required.

Easytoinstallanduse

Flexible solution

Use underloor powertrack

and tap-o units rom

Schneider Electric.

P117674

P117435

P116384

P117433

p117429

P117434

P117433

P117421

P112953

P117570


6/126

Floor outlet boxesRange

Floor boxes

Empty oor outlet boxesType Colour Dimensions

A/B/C (mm)Qty perpackage

Ref. No.

Complete, rectangular, three or four compartment oor outlet box for use with British Standard outlets. A wide range of mountingplates in both 75 and 87 mm width are available. The oor box is provided with a quick-x, metal base box. The lid, with integratedcable outlets, can be installed in two positions and can easily be removed during installation and use. The lid can be tted with aoor material insert; the plastic oor box has a ready-to-use inll available as an accessory.

Three-compartment oor outlet boxes for 87 mm mounting plates

P113612

P113613 The three-compartment plastic trimmed oor box has a maximum outlet capacity of 3x2 gang accessories.The 70 mm deep box

comes with a steel cover over the empty space next to the 3rd compartment, whereas the 100 and 130 mm deep versions havea plastic cover. The space underneath the cover gives extra cable space / enhanced bending radius, to the 3rd compartment.

Alternatively, for 100 and 130 mm deep versions, modular DIN-rail equipment, such as an RCD earth leakage breaker, can beused by xing the optional DIN-rail kit in the bottom of the base box and removing the knock-outs in the plastic cover.Material: PA/ABS, sheet steel.

P113614 70 mm deep Grey 70/222/348 1 INS53070

100 mm deep Grey 100/222/348 1 INS53100

130 mm deep

Grey 130/222/348 1 INS53130

P1

16960

P1

16961 As the above but in brushed stainless steel.

Material: Stainless steel, sheet steel. Available Autumn 201070 mm deep 84/222/348 1 INS53170

100 mm deep 114/222/348 1 INS53200

P116962 130 mm deep

144/222/348 1 INS53230

Four-compartment oor outlet boxes for 75 mm mounting plates

P113615

P113616 The four-compartment plastic trimmed oor box has a maximum outlet capacity of 4x75mm wide plates (maximum of 3 twin

switch sockets + 1 data plate). DIN-rail not compatible with four-compartment box.Material: PA/ABS, sheet steel.

P113617 70 mm deep Grey 70/222/348 1 INS54070

100 mm deep Grey 100/222/348 1 INS54100

130 mm deep Grey 130/222/348 1 INS54130

P11

6963

P11

6964 As the above but in brushed stainless steel.

Material: Stainless steel, sheet steel. Available Autumn 201070 mm deep 84/222/348 1 INS54170

100 mm deep 114/222/348 1 INS54200

P116965 130 mm deep

144/222/348 1 INS54230

Pre-wired oor boxesThree-compartment oor outlet boxes

Ready-to-use, pre-wired plastic trimmed oor boxes, 100 mm deep. Conguration options include one/two twin switched sockets,standard earth (SE) or clean earth (CE) and connection to a 3 m 32A unfused or a 5 m 13A fused tap-off for busbar connection(other variations available on request). RCD can be tted as an option.Material: PA/ABS, sheet steel.

P117684 Type A

One twin BS 13A SSO (SE),3 m /32A unfused tap-off

Grey 100/222/348 1 INS53101

with 30mA RCD tted INS53101RCDType BTwo twin BS 13A SSO (SE),3 m /32A unfused tap-off

Grey 100/222/348 1 INS53102

with 30mA RCD tted INS53102RCD

Type COne twin BS 13A SSO (SE),5 m /13A fused tap-off

Grey 100/222/348 1 INS53103


Type DTwo twin BS 13A SSO (SE),5 m /13A fused tap-off

Grey 100/222/348 1 INS53104


Type EOne twin BS 13A SSO (CE),3 m /32A unfused (CE) tap-off

Grey 100/222/348 1 INS53105

with 30mA RCD tted INS53105RCDType FTwo twin BS 13A SSO (CE),3 m /32A unfused (CE) tap-off

Grey 100/222/348 1 INS53106



7/127


Floor boxes

Pre-wired oor boxesType Colour Dimensions


Ref. No.

Three-compartment oor outlet boxes, cont.

P117684 Type G

One twin BS 13A SSO (CE), 5 m /13A fused(CE) tap-offwith 30mA RCD tted

Grey 100/222/348 1 INS53107

INS53107RCD

Type HTwo twin BS 13A SSO (CE), 5 m /13A fused(CE) tap-offwith 30mA RCD tted

Grey 100/222/348 1 INS53108

INS53108RCD

Four-compartment oor outlet boxes

Ready-to-use, pre-wired oor boxes, 100 mm deep. Conguration options include two/three twin switched sockets, standardearth (SE) or clean earth (CE), and connection to a 3m 32A unfused or a 5 m 13A fused tap-off for powertrack connection (othervariations available on request).Material: PA/ABS, sheet steel.

P117427 Type I

Two twin BS 13A SSO (SE), 3 m /32A unfusedtap-off

Grey 100/222/348 1 INS54101

Type JThree twin BS 13A SSO (SE), 3 m /32A unfusedtap-off

Grey 100/222/348 1 INS54102

Type KTwo twin BS 13A SSO (SE), 5 m /13A fusedtap-off

Grey 100/222/348 1 INS54103

Type LThree twin BS 13A SSO (SE), 5 m /13A fusedtap-off

Grey 100/222/348 1 INS54104

Type MTwo twin BS 13A SSO (CE), 3 m /32A unfused(CE) tap-off

Grey 100/222/348 1 INS54105

Type NThree twin BS 13A SSO (CE), 3 m /32A unfused(CE) tap-off

Grey 100/222/348 1 INS54106

Type O

Two twin BS 13A SSO (CE), 5 m /13A fused(CE) tap-off

Grey

100/222/348 1 INS54107

Type PThree twin BS 13A SSO (CE), 5 m /13A fused(CE) tap-off for powertrack

Grey 100/222/348 1 INS54108

Mounting plates for 3-compartment oor boxes87 mm wide plates with outlets

173x87 mm plates with British Standard power sockets, for use with a 3-compartment oor box.Material: Sheet steel.

P116632 Q301CE

With twin BS1363 13A switched socket (dualearth and clean earth)

Blue 32/87/173 1 INS55300

P116361 Q301

With twin BS1363 13A switched socket (dualearth)

Blue 32/87/173 1 INS55301

P116365 Q313

With twin BS5733 13A (non-standard and cleanearth) socket

Blue 28/87/173 1 INS55313

P116364 Q312

With three single BS1363 13A socketsBlue 28/87/173 1 INS55312


8/128


Floor boxes

Mounting plates for 3-compartment oor boxesType Colour Dimensions

B/C/A (mm)Qty perpackage

Ref. No.

87 mm wide mounting plates

173x87 mm mounting plates for British Standard power and data outlets, for use with a 3-compartment oor box.Plate material: Sheet steel.

P116366 Q314

Plate to accept moulded twingang accessory

Blue 87/173/7 1 INS55314

P116367 Q321

Plate to accept two mouldedsingle gang accessories,86x86mm

Blue 87/173/2 1 INS55321

P116368 Q322

Plate to accept up to six LJ6C/RJ45 data/comm. accessories,37x22mm knock-outs

Blue 87/173/2 1 INS55322

P1163

73 Q325

Plate to accept up to eight LJ6C/RJ45 data/comm. accessories,37x22mm knock-outs

Blue 87/173/1 1 INS55325

P116369 Q328

Plate (angled down) to acceptfour LJ6C/RJ45 data/comm.accessories

Blue 87/173/23 1 INS55328

P116371 Q323

Plate with two Euro 50x50 mmframes to accept data/comm.accessories

Blue 87/173/19 1 INS55323

P116372 Q326

Blank plateBlue 87/173/1 1 INS55326

Mounting plates for 4-compartment oor boxes75 mm wide plates with outlets

173x75 mm plates with British Standard power sockets, for use with a 4-compartment oor box.Plate material: Sheet steel.

P116375 Q471CE

With twin BS1363 13A switchedsocket (dual earth and cleanearth)

Blue 75/173/32 1 INS55470

P116374 Q471

With twin BS1363 13A switchedsocket (dual earth)

Blue 75/173/32 1 INS55471

P116376 Q473

With twin BS5733 13A(non-standard and clean earth)socket

Blue 75/173/28 1 INS55473

P116363 Q475

With three single BS1363 13Asockets

Blue 75/173/28 1 INS55475

75 mm wide mounting plates

Modular 173x75 mm mounting plates for British Standard power and data outlets, intended to be used for 4-module oor boxes.Plate material: Sheet steel.

P116377 Q472

Plate to accept up to six LJ6C/RJ45 data/comm. accessories,37x22mm knock-outs

Blue 75/173/2 1 INS55472

P116378 Q478

Plate (angled down) to acceptfour LJ6C/RJ45 data/comm.accessories

Blue 75/173/23 1 INS55478

P116

379 Q474

Plate with two Euro 50x50 mmframes to accept data/comm.accessories

Blue 75/173/19 1 INS55474

P116380 Q476

Blank plateBlue 75/173/1 1 INS55476


9/129


Floor boxes

AccessoriesType Colour Dimensions


Ref. No.

DIN rail RCD/MCB/RCBO kit

P116386 DIN rail kit including rail and pop rivet for the mounting of RCBs and other DIN devices. The rail is to be xed on a dedicated

location in the base box of 100 mm and 130 mm 3-compartment oor boxes.Material: Sheet steel.

DIN rail 39/8/35 1 INS55100

Lid inll, linoleum

P85844 Linoleum lid inll to be used in the lid of Mita plastic oor outlet boxes. Provided with self-adhesive tape underneath.

Material: Linoleum.

Lid inll, linoleum Grey 6/317/163 1 ISM50819

Lid inll, stainless steel

P93898 Stainless steel lid inll to be used in the lid of Mita plastic oor outlet boxes. Provided with self-adhesive tape layer underneath and

with protective lm on the surface.Material: Stainless steel, rubber.

Lid inll, stainlesssteel 6/317/163 1 ISM50820

Swivel xings

P117436 Swivel xings to be mounted on each side of the oor boxes. Intended for use as additional xing method in raised oors with a

panel thickness between 23 mm and 53 mm.Material: PA6, steel.

Swivel xing Blue 58/12/25 2 ISM50823

Cable retainers

P116385 Plastic cable retainers to safely route cables through outlets to avoid damage between lid and trim.

Material: PA6.

Cable retainer Red 28/30/68 2 INS55010

Circuit breakers

Square D and Schneider Electric circuit breakers are available

Underoor powertrack system

Type DimensionsA/B/C (mm)

Qty perpackage

InternalRef. No.

Ref. No.

The underoor powertrack system provides a convenient and exible solution for power distribution in raised access oorapplications. Shuttered outlets are located at 300 mm intervals, to aid exibility and convenience, and come complete withretained dust covers.The underoor powertrack system is designed for a rated current/voltage of 63A/240V and has both 13A fused and 32A unfusedtap-off units available. The tap-off units are wired through LSF cables and are equipped with positive latching to preventaccidental removal.

Underoor powertrack, standard earth

P117693 Underoor powertrack, standard earth (3 busbar), in four different lengths.

Material: PA6, copper, sheet steel (zinc coated).

Standard1200 mm

32/62/1200 5 PT12S 5200 010

Standard1800 mm

32/62/1800 5 PT18S 5200 020

Standard2400 mm

32/62/2400 5 PT24S 5200 030

Standard3600 mm

32/62/3600 5 PT36S 5200 040

Underoor powertrack, clean earth

P117692 Underoor powertrack, clean earth/low noise (4 busbar), in four different lengths.


Clean earth1200 mm

32/62/1200 5 PT12C 5200 015

Clean earth1800 mm

32/62/1800 5 PT18C 5200 025

Clean earth2400 mm

32/62/2400 5 PT24C 5200 035

Clean earth3600 mm

32/62/3600 5 PT36C 5200 045


10/1210


Floor boxes

Underoor powertrack systemType Dimensions


InternalRef. No.

Ref. No.

Feed unit, standard

Underoor powertrack feed unit with integrated xings, for feed ing on the left-hand or on the right-hand side. For standard earth systems.


P117691 Standard earth, left-hand/

type 150/134/229 1 PTF1S 5200 100

P117690 Standard earth, right-hand/

type 250/134/229 1 PTF2S 5200 110

Feed unit, clean earth

Underoor powertrack feed unit with integrated xings, for feed ing on the left-hand or on the right-hand side. For clean earth systems.


P117689 Clean earth, left-hand/

type 150/134/229 1 PTF1C 5200 105

P117688 Clean earth, right-hand/

type 250/134/229 1 PTF2C 5200 115

Track interconnector

Connector unit, intended to couple two underoor powertrack units. Including xing bracket to mount powertrack bodies to the solid oor.


P117687

P117686 Standard earth 30/107/95 1 PTIS 5200 320

Clean earth 30/107/95 1 PTIC 5200 325

Universal xing bracket

P117686 Fixing bracket to mount underoor powertrack to the solid oor. Can be used in any position along the powertrack body.

Recommended xing points max. 1.8 m.Material: Sheet steel (zinc coated).

Fixing bracket 25/107/95 1 PTFB 5200 300

Universal end-stop

P117685 End-stop including xing bracket, to isolate and close an open end of a powertrack.

Material: Sheet steel (zinc coated).

End-stop 30/107/95 1 PTS3 5200 360

Underoor powertrack system

Type DimensionsA/B/C (mm)

Qty perpackage

InternalRef. No.

Ref. No.

Flexible corner unit

P117620 Flexible connection unit (L=1 m), to be used for connection of two powertracks in corners or angles. To be combined with both

left-hand and right-hand feeder units.Material: Copper, sheet steel (zinc coated).

Standard earth 32/1200 1 PTFCS 5200 150

Clean earth 32/1200 1 PTFCC 5200 155

Tap-off units

Tap-off units conform to the requirements of BS7671:2008 17th Edition, section 543.7 (formerly 607 of 16th Edition). Tap-off unitincluding a exible metal conduit with cables and a powertrack plug. Length 3 m (32A unfused) or 5 m (13A fused). Standard earthor clean earth. Other variations available on request.Material: PA6, copper, sheet steel (zinc coated).

P116384 Standard earth 32A unfused,

3 m16/3000 1 PTT32S 5200 200

P116383 Standard earth 13A fused,

5 m16/5000 1 PTT13S 5200 210

P116382 Clean earth 32A unfused,

3 m16/3000 1 PTT32C 5200 205

P116381 Clean earth 13A fused,

5 m16/5000 1 PTT13C 5200 215


11/1211

Floor boxes Floor outlet boxesTechnical description

DescriptionThe Mita oor box range contains a complete portfolio of products forinstallation of British Standard outlets for power and data in raised oor

applications.Plastic and stainless steel trimmed oor boxes are available, eachincluding lid, carpet trims and a metal base box, ready for mounting eitherthree or four outlets.

The lid can be inlled with various oor materials. The plastic trim canaccommodate an insert of up to 6 mm thickness, and ready-to-use lid inllsof grey linoleum or stainless steel are available. The stainless steel trim canaccommodate up to 15 mm thick insert materials, such as carpet, woodor stone tiles.

All oor boxes feature a convenient quick-x xing system, enablinga tool-free and secure t into the oor.

The plastic oor boxes are also available in pre-wired versions.

Benets Quick and easy installation, without tools

Large outlet capacity Wide range of plates and accessories to satisfy end-user requirements Three depths: 70, 100 and 130 mm The 100 and 130 mm 3-compartment versions are prepared for

integration of a circuit breaker Lid recesses can be inlled with most common oor nishes Reversible, self closing lid Durable and scratch-resistant material Pre-wired versions: fully assembled and factory tested to eliminate wiring

errors and loss of components and reduced installation times According to BS EN 60670-23:2008 standard

Technical and Material data

PA/ABS Density 1.12 g/cm3

Linear expansion 70x106 m/mC

Water absorption 0.9%Volume resistivity 1014 cm

Dielectric strength 19 kV/mm

Colour Grey RAL 7011

PA6 Density 1.13 g/cm3

Linear expansion 70-100x106 m/m C

Colour Blue RAL 5003

Sheet steel Specication S 350 GD

Density 7.8 g/cm3

Surface treatment Zinc coated

Stainless steel Specication X5CrNi 18-10

Density 7.8 g/cm3

Cable capacity 1720 mm2, max. cable 11 mm

Temperature range Operating temperature from -25C to +60C

Degree of protection IP20Standards The products comply with BS EN 60670-23:2008

The products satisfy the provisions for CE markingaccording to the Low Voltage Directive 73/23/EECand 93/68/EEC

Floor cut-out

Dimensions

Amm

Bmm

Cmm

Dmm

Plastic trimmed boxes

INS53070INS54070

75 30 30 6

INS53100INS54100

105 45 45 6

INS53130INS54130

135 60 60 6

Steel trimmed boxes

INS53170INS54170

84 30 30 15

INS53200INS54200

114 45 45 15

INS53230INS54230

144 60 60 15

P11742

2

P117676

P117677


12/12

Nationwide support on one number -

call the Customer Inormation Centre on

0870 608 8 608Fax 0870 608 8 606

Schneider Electrics local support

Schneider Electric is committed to supporting its customers at every stage o a project. Our 180 sales engineers, the largest

dedicated sales orce in the UK electrical industry, operate rom 4 customer support centres.

Our sales engineers are skilled at assessing individual requirements and combined with the expert support o our product

specialists, will develop the most eective and economical answer taking relevant regulations and standards ully into account.

To access the expertise o the Schneider Electric group, please call 0870 608 8 608. Each customer support centre includes

acilities or demonstrations and training, and presentation rooms ully equipped with audio visual and video, p roviding

excellent meeting acilities.

Merlin Gerin is a world leader in the manuacture and

supply o high, medium and low voltage products or the

distribution, protection, control and management o

electrical systems and is ocused on the needs o both the

commercial and industrial sectors. The newly launched VDI

Network Solutions oer provides exible, confgurable

ethernet systems or all communication needs.

Square D is a total quality organisation and its business

is to put electricity to work productively and eectively,

protecting people, buildings and equipment. Its low voltage

electrical distribution equipment, systems and services are

used extensively in residential and commercial applications.

Telemecanique is a UK market leader and world expert in

automation and control. It provides complete solutions, with

its range o components, Modicon range o high technology

programmable controllers (PLCs), multiple feldbus and

ethernet communication networks, HMI, motion control

systems, variable speed drives and communications sotware.

In addition, it oers power distribution through preabricated

busbar trunking.

Product showrooms

Local customer support centres

Industrial systems and solutions showroom

Schneider Electric Ltd, University o Warwick Science Park, Sir William Lyons Road, Coventry CV4 7EZ

Building systems and solutions showroom

Schneider Electric Ltd, Staord Park 5, Telord, Shropshire TF3 3BL

Energy and Inrastructure systems and solutions showroom

Schneider Electric Ltd, 123 Jack Lane, Hunslet, Leeds LS10 1BS

member o

.co.uk

Scotland

Schneider Electric Ltd

Suites 1-6, Technology Building

James Watt Avenue

Scottish Enterprise Technology Park

East Kilbride

Glasgow G75 0QD

South West


PO Box 41

Langley Road

Chippenham

Wiltshire SN15 1JJ

North West


First Floor

Market House

Church Street

Wilmslow

Cheshire SK9 1AY

Ireland


Head ofce, Block a

Maynooth Business Campus

Maynooth, Co. Kildare

Tel: (01) 601 2200

Fax: (01) 601 2201

www.schneider-electric.ie

schneider-mita_floor_box_catalogue_2010_se6861.pdf

Documents