school of engineering - rk...

31
SCHOOL OF ENGINEERING SYLLABUS FOR PROGRAM: B.TECH. [MECHANICAL ENGINEERING] ACADEMIC YEAR: 2016 – 17 (BATCH: 2014-2018) SEMESTER: VI DIRECTOR SCHOOL OF ENGINEERING RK UNIVERSITY RAJKOT

Upload: truongcong

Post on 06-Mar-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

SCHOOL OF ENGINEERING

SYLLABUS

FOR

PROGRAM: B.TECH.[MECHANICAL ENGINEERING]

ACADEMIC YEAR: 2016 – 17(BATCH: 2014-2018)

SEMESTER: VI

DIRECTORSCHOOL OF ENGINEERING

RK UNIVERSITYRAJKOT

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 2

TEACHING SCHEMEPROGRAM: SEMESTERB.TECH. [ MECHANICAL ENGINEERING ] VI

ACADEMIC YEAR: 2016-17[2014-18 BATCH]

Sem-VI

Course

CodeCourse Name

Teaching Scheme (Hours)Credit

sTheoryTutoria

l

Practica

l

ME60

8DYNAMICS OF MACHINES 3 0 2 4

ME60

9HEAT AND MASS TRANSFER 3 0 2 4

ME61

0COMPUTER AIDED DESIGN 3 0 2 4

ME61

1INTERNAL COMBUSTION ENGINES 3 0 2 4

ME61

2ADVANCED MANUFACTURING PROCESSES 3 0 2 4

ME61

3SOFTWARE LAB - III 0 0 2 1

00XXX UNIVERSITY ELECTIVE - II 3 0 0 3

PC60

1COMPREHENSIVE VIVA-VOICE 0 0 0 5

Total 18 0 12 29

Total Hours 30

University Elective - II

Course

CodeCourse Name

Teaching Scheme (Hours)Credit

sTheoryTutoria

l

Practica

l

CD605 CAMPUS TO CORPORATE TRAING - II 3 0 0 3

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 3

(UNI. ELE. - II)

ESL60

1

ENGLISH AS A SECOND LANGUAGE -

ADVANCED LEVEL 2 (UNI. ELE.-II)

MG60

1ENTREPRENEURSHIP (UNI. ELE. - II) 3 0 0 3

Department ElectiveCourse

CodeCourse Name Teaching Scheme (Hours)

Credit

s

ME61

4GAS DYNAMICS (Dept. ELE. - II) 3 0 0 3

DIRECTORSCHOOL OF ENGINEERING

RK UNIVERSITYRAJKOT

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 4

Course Title DYNAMICS OF MACHINES

Course Code ME608

Course Credit

Theory :03

Practical :01

Tutorial :00

Credits :04

Course Learning Outcomes:

After Successful completion of the above course, students will be able to:

Describe the different modes of vibrations. Interpret various steps involved in vibration analysis of an engineering system. Perform the effect of vibrations using universal vibration apparatus. Explain various vibration measuring instruments. Discuss the effects of unbalanced forces from prescribed mechanism. Calculate the unbalance masses in different types of engines. Apply the theory of balancing to reciprocating and rotating masses.

Detailed Syllabus

Sr.No. Name of chapter & details Hours

Allotted

SECTION-I

1. Mechanical Vibrations:Introduction, parts of vibrating system, types of vibration, Newton’s method,D’Alembert’s principle, Energy method, Rayleigh’s Method, periodic motion,harmonic motion, superposition of simple harmonic motions.

04

2. Undamped Free Vibration:Derivation of differential equations, torsional vibrations, equivalent stiffness ofspring and dampers, transverse vibration of beam.

04

3. Free Damped Vibration:Introduction, types of damping, critical damping and damping factor, differentialequation of damped free vibration, logarithmic decrement, Dunkerley’s method

05

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 5

4. Forced Vibration:Source of excitation, forced vibration with harmonic excitation, Steady statevibrations, vector representation of forced vibration, magnification factor,frequency response curve, force transmissibility and transmissibility curve,vibration isolation, forced vibration with rotating and reciprocating part, supportmotion, whirling speed of shaft with a single disc with and without damping.

08

Total 21

SECTION-II

5. Two Degree of Freedom:Principle mode of vibration, vibrations of undamped two degree of freedom, freetorsional vibration of two rotor system, torsionally equivalent shaft, free torsionalvibration of three rotor system, torsional vibration of geared system, vibrationabsorber.

6

6. Vibration Measuring Instruments:Vibration measuring instruments, vibrometer, accelerometer and Frequencymeasuring instruments.

3

7. Balancing:Introduction, Need for balancing, Static balance, balancing of rotating masses insame and different planes.

2

8. Dynamic Balancing:Dynamic balancing, balancing of reciprocating masses. 2

9. Balancing of Locomotives:Balancing of locomotives, Partial balancing of locomotives, swaying couple,hammer blow, variation in tractive effort.

3

10. Balancing of Multi Cylinder Engine:Balancing of multi cylinder in line engines, direct and reverse crank concept. 2

11. Balancing Machines:Balancing of V and radial engines, balancing machines. 3

Total 21

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 6

Instructional method and Pedagogy:

At the start of course, the course delivery pattern, prerequisite of the subject will be discussed. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory. Minimum two internal exams will be

conducted and average of two will be considered as a part of overall evaluation. Assignments based on course content will be given to the students at the end of each

unit/topic and will be evaluated at regular interval. Surprise tests/Quizzes/Seminar/Tutorials will be conducted. The course includes a laboratory, where students have an opportunity to build an appreciation

for the concepts being taught in lectures. Minimum eight experiments shall be there in thelaboratory related to course contents.

Reference Books:

1. Singiresu S. Rao,“Mechanical Vibrations”, Prentice Hall.2. Dr. V. P. Singh, “Mechanical Vibration”, S. Chand and Sons New Delhi.3. F. Haidery, “Dynamics Of Machines”, Nirali Prakashan, Pune4. Rattan S.S., “Theory of Machines”, Tata, McGraw-Hill Publishing Company Ltd., New Delhi5. J. E. Shigley, “Theory of Machines And Mechanisms”, Tata Mcgraw Hill Publicatons.6. P. L. Ballaney, “Theory Of Machines & Mechanisms”, Khanna Publishers, Delhi7. Sadhu Singh, “Theory of Machines”,Pearson Education, 2002.8. Kelly S. Graham Kudari Shashidha“Mechanical Vibrations”, Tata Mcgraw Hill9. Tse Francis, S. Morse Ivan, E. Hinkle Rolland, “Mechanical Vibrations: Theory and

Applications”, CBS Publishers & Distributors New Delhi.

Additional Resources

http://nptel.ac.in/courses/112101096/ http://www.learnerstv.com/Free-Engineering-Video-lectures-ltv069-Page1.htm http://www.learnerstv.com/Free-Engineering-Video-lectures-ltv833-Page1.htm

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 7

Course Title HEAT AND MASS TRANSFER

Course Code ME609

Course Credit

Theory :03

Practical :01

Tutorial :00

Credits :04

Course Learning Outcomes:

After Successful completion of the above course, students will be able to:

Understand the basic laws of heat transfer. Understand the fundamentals of convective, conductive and radiative heat transfer process

and solve related problems. Calculate heat transfer coefficients for natural convection, forced convection in inside as well

as exterior surfaces. Develop solutions for transient heat conduction in simple geometries. Understand the basics of film wise and drop wise condensations process.

Detailed Syllabus

Sr.No. Name of chapter & details Hours

Allotted

SECTION-I

1. Introduction & Basic Concepts:Modes of heat transfer: Basic laws governing conduction, convection, and radiationheat transfer; Thermal conductivity; convective heat transfer coefficient; radiationheat transfer.

1

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 8

2. Conduction:The thermal conductivity of solids, liquids and gases, factors influencingconductivity, measurement. The general differential equation of conductionOne dimensional steady state conduction, linear heat flow through a plane andcomposite wall, tube and sphere, critical thickness of insulation, Effect of variablethermal conductivity. Conduction with heat sources.

Heat transfer from Extended Surface: Types of fin, heat flow throughrectangular fin, infinitely long fin, fin insulated at the tip and fin losing heat at thetip.

Transient heat conduction: lumped heat capacity analysis, time constant, transientheat conduction in solids with finite conduction and convective resistances.

12

3. Convection:Basic Concepts ,Convective Heat Transfer Coefficients , Boundary Layer ConceptTypes of Convection,Forced Convection: Dimensional Analysis ,External Flow ,Flow over Plates,Cylinders and Spheres , Internal Flow ,Laminar and Turbulent Flow , CombinedLaminar and Turbulent ,Flow over Bank of tubesFree Convection: Dimensional Analysis, Flow over Vertical Plate, HorizontalPlate, Inclined Plate, Cylinders and Spheres.Continuity, momentum and energy equations, thermal and hydrodynamic boundarylayer, blasius solution for laminar boundary layer, Von-Karman integralmomentum equation.

8

Total 21

SECTION-II

6. Thermal Radiation:Introduction, absorption and reflection of radiant energy, Emission, Radiosityand irradiation, Black and non-black bodies, Kirchoff's law; intensity ofradiation, radiation Exchange between black surface, geometric configurationfactor, grey body radiation exchange between surfaces of unit configurationfactors. Electrical analogy to simple problems.

12

7. Boiling And Condensation:Condensation Heat Transfer, Drop wise and Film wise, Condensation, Boiling HeatTransfer, Regimes of boiling, nucleate boiling, film pool Boiling.

6

8. Mass Transfer:Basic Concepts, Diffusion Mass Transfer, Fick’s Law of Diffusion, Steady stateMolecular Diffusion, Convective Mass Transfer, Momentum, Heat and MassTransfer Analogy.

3

Total 21

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 9

Instructional method and Pedagogy:

At the start of course, the course delivery pattern, prerequisite of the subject will be discussed. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory. Minimum two internal exams will be

conducted and average of two will be considered as a part of overall evaluation. Assignments based on course content will be given to the students at the end of each

unit/topic and will be evaluated at regular interval. Surprise tests/Quizzes/Seminar/Tutorials will be conducted. The course includes a laboratory, where students have an opportunity to build an appreciation

for the concepts being taught in lectures. Minimum eight experiments shall be there in thelaboratory related to course contents.

Reference Books:

1. Nag P.K, “ Heat Transfer”, Tata McGraw-Hill, New Delhi, 2002.2. Holman J.P “Heat and Mass Transfer” Tata McGraw-Hill, 2000.3. Frank P. Incropera and David P. DeWitt, “Fundamentals of Heat and Mass Transfer”, John

Wiley and Sons, 1998.4. Yunus A Cengel, “Heat and Mass Transfer” By Tata McGraw Hill5. D.S.Kumar, “Heat And Mass Transfer” By,S.K.Katariya And Sons, New Delhi.6. R. K. Rajput, “Heat And Mass Transfer”,By S. Chand & Company Ltd New Delhi.

Additional Resources

http://www.nptel.ac.in/courses/112101097 http://www.sciencedirect/science/journal/00179310 http://www.learnerstv.com/Free-engineering-Video-lectures-ltv084-Page1.htm

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 10

Course Title COMPUTER AIDED DESIGN

Course Code ME610

Course Credit

Lecture : 03

Practical : 01

Tutorial : 00

Total : 04

Course Learning Outcomes

At the end of the course the students will be able to: Understand basics techniques of Graphics, Geometric modelling, FEA and Optimization

using their mathematical derivations. Design machine components using programming language. Create an assembly and production drawing using CAD software. Use FEA solvers to solve basic design problems.

Detailed SyllabusSr.No. Name of chapter & Details Hours

AllottedSection – I

1 CAD Fundamental :Introduction, Definition, The product lifecycle and CAD/CAM, Application ofcomputers for design, Benefits and drawback of CAD, Hardware in ComputerAided Design, Technical specification of CAD workstation

02

2 Fundamental of Computer Graphics :Transformation: The software configuration of a graphics system, 2D and 3Dtransformation – Translation, Rotation, Scaling, Reflection, shear, Homogeneouscoordinate system, concatenation of transformation.Interactive Computer Graphics: Raster and vector scan graphics, Line drawingAlgorithms – DDA and Bresenham’s, Circle Algorithms – Mid Point andBresenham’s

08

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 11

3 Basics of Geometric Modelling:Introduction, Requirements of Geometric Modelling, Geometric Models – 2D,2.5D, 3D, Wireframe, Surface, Solid, CSG, B-rep, Cellular decomposition,Boolean Operations, Feature based Modelling, Parametric Modelling, Constrainbased Modelling, Relations,Representation of Curves: Parametric and Non-parametric, Explicit and Implicit,Parametric representation of analytic curves, Curvature Continuity, Parametricrepresentation of Synthetic curves, Hermite cubic curve, Bezier curve, B-splinecurve, Curve manipulations,Representation of Surfaces: Classification of surfaces, Surface representationmethods, Surface ManipulationRepresentation of Solids: Representation schemes for solid models, Sweeping,Solid ManipulationsIntroduction to Visual Realism, Demonstration of features of CAD software,Mechanism and Animation.

08

4 Computer Aided Programming:Fundamental of computer programming, Need of programming in the field ofmechanical engineering, Different levels of programming, Concept of ObjectOriented Programming – objects, classes, Polymorphism and overloading,Inheritance, Design of various mechanical members like shaft, key, spring,pressure vessel etc.

03

Total 21Section – II

Sr.No. Name of chapter & Details Hours

Allotted6 Graphics Standard:

Introduction, CAD graphics software and database, software configuration of CADSoftware system, Software standards, GKS, Exchange of CAD data – IGES, STEP,DXF, PHIGS, NAPLPS, STL

03

7 Finite Element AnalysisIntroduction, Steps in Finite element Analysis, Types of Elements, OneDimensional Linear Modeling, Natural or Intrinsic coordinate system, Shapefunction in Natural coordinate system, Displacement, Strain and StressRelationships, Element stiffness Matrix – Potential Energy Approach, EliminationApproach, Penalty Approach, Analysis of TrussesDemonstration of any FEA Package.

09

8 OptimizationIntroduction: Engineering Applications of Optimization, Statement of anOptimization Problem(Design Vector, Design Constraints, Constraint Surface,Objective Function, Objective Function Surfaces, Classification of OptimizationProblemsClassical Optimization Techniques : Introduction, Methods to solve Single-Variable Optimization, Multivariable Optimization with No Constraints andEquality constraints using Direct Substitution Method.

09

Total 21

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 12

Instructional Method and Pedagogy: Lectures will be conducted with the aid of multi-media projector, black board, OHP etc. Extensive demonstrations on various cad packages Assignments based on course content will be given to the students at the end of each

unit/topic and will be evaluated at regularly. Surprise tests/Quizzes/Seminar/Tutorials will be conducted. Minimum two drawing sheets based Assembly and detailing. Laboratory work is to be done as per their lab workbook which has various practice models.

Reference Books:

1. MikellGroover and Zimmer, “CAD/CAM: Computer Aided design and Manufacturing”,Pearson Education

2. FarazdakHaideri,“CAD/CAM – Automation”, NiraliPrakashan3. KuldeepSareen and Chandandeep Grewal,“CAD/CAM theory and concepts”, S chand and

Company4. Vikram Sharma,“Fundamentals of Computer Aided Design”, KATSON Books5. ChouguleN.K,“CAD/CAM/CAE”, Scitech publications6. Radhakrushnan,“CAD CAM CIM”, New Age International Publication7. Chendraupatla,“Finite Element Analysis”, EEE Publication8. Ibrahim Zeid,“CAD/CAM Theory & Practice”, Tata Mc Graw Hill9. P N Rao,“CAD/CAM: Principles and Applications”, Tata Mc Graw Hill10. Zeid Ibrahim,“Mastering CAD/CAM”,Tata Mc Graw-Hill Publishing Company Limited11. Kumar SurenderJhaA.K,“Technology of Computer Aided Design and Manufacturing

CAD/CAM : CAE”., Dhanpat Rai & Co. (P) Ltd Delhi12. KrishnamoorthyC.S. Rajeev S. Rajaraman,“A Computer Aided Design : Software and

Analytical Tools”, Narosa Publishing House Pvt.ltd.13. S.S. Rao,“Optimization Methods” , New Age International Publications14. Vajpayee S. Kant, “Principles of Computer Integrated Manufacturing”, Prentice-Hall of India

Private Limited, New Delhi.

Reading Materials, web materials with full citations

http://learningexchange.ptc.com/ N.P.T.L. Lecture Series, www.nptel.iitm.ac.in http://area.autodesk.com/tutorials www.mcadcentral.com http://www.cadalyst.com/ http://www.vtc.com/cad.htm http://www.solidworks.com/sw/resources/recorded-webinars.htm

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 13

Course Title INTERNAL COMBUSTION ENGINES

Course Code ME611

Course Credit

Lecture : 03

Practical : 01

Tutorial : 00

Credits : 04

Course Learning Outcomes:

After Successful completion of the above course, students will be able to:

Classify Different types of internal combustion engines. Recognize various Air Standard cycles. Interpret fuel supply systems and combustion processes in I C Engines. Compare various ignition and governing system of I C Engines Evaluate alternative fuels for I C Engines Analyze various performance improvement test on I C Engines .

Detailed SyllabusSr.No.

Name of chapter & Details HoursAllotted

Section-I1 Introduction to I.C. Engine:

Applications and actual working of I.C. engines, Valve and port timingdiagrams, Reasons for variation of specific heats of gases change of internalenergy and enthalpy during a process with variable specific heats, Isentropicexpansion with variable specific heats, and effect of variable heats on airstandard cycles of otto and diesel cycles.

04

2 Fuel Air Cycles, Actual Cycles And Their Analysis:Factors considered and assumptions made for fuel-air cycles dissociation,Comparison of air standard and fuel air cycles, effect of operating variables oncycle analysis, Difference between actual cycle and fuel air cycle for SI and CIengines.

04

3 Fuel Supply Systems For S.I. Engines:Fuel supply system for SI engines, Properties of air-petrol mixture, mixturerequirements for different loads and speeds, Simple carburetor and its working,calculation of air-fuel ratio, types of carburetors, Limitations of a single jetcarburetor, modern carburetors, Problems in carburetors, altitude compensation,gasoline injection in SI engines, MPFI system for modern automobile engines.

05

4 Fuel Supply Systems For C.I. Engines:Requirement of ideal injection system, types of injection systems, Fuel pumpsand injectors, Types of nozzles, spray formation, quantity of fuel and size ofnozzle orifice.

04

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 14

5 Combustion in SI Engines:Limits and stages of combustion, factors affecting ignition lag, Flamepropagation, effect of engine variable on flame propagation, abnormalcombustion and knocking in SI engine, Factors affecting the knocking, Effectsof knocking, control of knocking, Basic of detonation, types of combustionchamber and their comparison.

04

Total 21Section-II

6 Combustion in CI Engines:Stages of combustion in CI engines, Air fuel ratio, delay period or ignition lag,variables effecting delay period, Diesel knock, methods of controlling dieselknock, CI engine combustion chamber requirements, types of combustionchambers, Cold starting of CI engine and cold starting aids.

04

7 Ignition System And Governing System:Ignition system like battery, magneto, and electronic, spark plug, firing order,Governing system:-quality, quantity &hit and miss governing, intake andexhaust systems, Scavenging systems: scavenging processes &systems,scavenging pumps.

03

8 Super Charging:Supercharging, Limits of super charging, Super charging power problems andturbo charging, Methods of arrangements of exhaust manifold in multi cylinderengine limitations of turbo charging.

02

9 Rating, Testing and Performance:Measurements of speed, air flow, fuel consumption, indicated power brakepower, frictional horse power, and smoke, testing of engines as per IndianStandard 10001, Performance test for variable speed I.C. Engines, heat balancesheet, governing test for constant speed I.C. Engines, effect of fuel injectionparameters in CI engines and ignition advance of SI engines on performance ofengine.

04

10 Emission:Emission of pollutants from SI & CI engines, control of emissions from SI andCI engines, Measurement of pollutants in exhaust gases, Effect of differentpollutants on human and plant life, Emission (Euro & Bharat stage) norms.

03

11 Alternative Fuels for IC Engine:Methanol, Ethanol, vegetable oils, bio gas, bio-fuels and blend with diesel,Comparison of their properties with Diesel and petrol, Biomass generated gas-As a substitute Fuel, LPG, LNG and CNG gas –as alternative fuel, Non ediblevegetable and wild oils as diesel engine fuels. Overall effect in emission duealternative fuels.

02

12 Unconventional Engines:Working principle of stratified charge engines, Variable compression ratioEngine.

02

13 Trouble Shooting and Overhauling of Engines. 01Total 21

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 15

Instructional Method and Pedagogy: At the beginning of course, the course delivery pattern, prerequisite of the subject will be

discussed. Lectures will be conducted with the aid of multi-media projector, blackboard, OHP etc. Attendance is compulsory in lectures and laboratory. Minimum two internal exams will be conducted and average of two will be considered as

a part of overall evaluation. Assignments based on course content will be given to the students at the end of each

unit/topic and will be evaluated at regularly. Surprise tests/Quizzes/Seminar/Tutorials will be conducted. The course includes a laboratory, where students have an opportunity to build an

appreciation for the concepts being taught in lectures.

Reference Books:

Heywood, JB, “Internal Combustion Engine Fundamentals”, McGraw Hill InternationalNew York.

Mathur & Sharma, ”Internal Combustion Engines”,Dhanpatrai publication. V.Ganeshan, ”Internal Combustion Engines”, Tata McGraw Hill publication. Domkundwar & Domkundwar.”Course in Internal Combustion Engines”, Dhanpatrai

publication. Gill Paul, W. Smith James, H. Ziurys Eugene, J.,” Fundamentals of Internal

Combustion Engines”, Oxford University Press New York. R.K.Rajput,”Textbook of Internal Combustion Engines.”,LaxmiPublications. R. Yadav, “Thermodynamics and Heat Engines : Volume II : Thermodynamics”,Central

publishing house, Allahabad

Additional Resources:

http://nptel.ac.in/courses/101104014/ http://nptel.ac.in/courses/112104033/ http://ocw.mit.edu/courses/mechanical-engineering/2-61-internal-combustion-

engines-spring-2008/ http://auto.howstuffworks.com/engine1.htm http://www.grc.nasa.gov/WWW/k-12/airplane/engopt.html

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 16

Course Title ADVANCED MANUFACTURING PROCESSES

Course Code ME612

Course Credit

Lecture : 03

Practical : 01

Tutorial : 00

Total : 04

Course Learning Outcomes:

After Successful completion of the above course, students will be able to: Understand the capabilities/limitations and benefits/drawbacks of different machining

techniques. Apply the knowledge of recent advances in manufacturing process in industry. Analyze problems related to manufacturing tools. Develop new product through rapid prototyping.

Detailed Syllabus

Sr.No. Name of chapter & Details Hours

Allotted

Section - I

1 Welding Processes:Friction stir welding, Diffusion bonding, Weld quality, Weldability, Testing ofweld joints, Weld design and process selection.

5

2 Casting Processes:Sand casting, Continuous casting, Expendable pattern casting, Squeeze casting andsemi- solid metal forming, Vacuum casting, Ceramic mold casting, Castingtechniques for single crystal components, Design consideration, Casting alloys,Economic of casting, Defects, Inspection of castings, Foundries and FoundryAutomation.

8

3 Metal Forming ProcessesShearing, Sheet metal characteristics, Test methods of Formability of sheet metals,Stretch forming, Rubber forming, Super plastic forming, Explosive forming,Magnetic pulse forming, Peen forming, Economics of sheet metal formingprocess.

8

Total 21

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 17

Section – II

4 Abrasive Machining:Introduction, Abrasives, Bonded Abrasives, Grinding Processes, Grinding WheelWear, Grinding Fluids, Design Consideration for Grinding, Ultrasonic Machining,Finishing Operations, Deburing.

7

5 Advanced Machining Processes:Introduction, Chemical Machining, Electrochemical Grinding, Wire EDM, Laserbeam Machining, Electron beam Machining, Plasma Arc Cutting, Water JetMachining, Micro Machining, Economics of Advance Machining Processes.

9

6 Rapid Prototyping and Rapid Tooling:Sterio lithography, Fused deposition Modeling, Selective Laser Sintering,Laminated Object Manufacturing, Rapid Tooling.

5

Total 21

Instructional Method and Pedagogy:

At the start of course, the course delivery pattern, prerequisite of the subject will be discussed. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory. Minimum two internal exams will be

conducted and average of two will be considered as a part of overall evaluation. Assignments based on course content will be given to the students at the end of each unit/topic

and will be evaluated at regular interval. Surprise tests/Quizzes/Seminar/Tutorials will be conducted. The course includes a laboratory, where students have an opportunity to build an appreciation

for the concepts being taught in lectures. Minimum eight experiments shall be there in thelaboratory related to course contents.

Reference Books:

1. R. K. Jain, “Production Technology”, Book Publishing Company (P) Ltd., Delhi.2. A. K. Chakrabarti, “Casting Technology & Cast Alloys”, Prentice – Hall of India Pvt. Ltd.3. Campbell John, “Castings”, Elsevier, New Delhi.4. H.M.T., “Production Technology”, Tata McGraw Hill Publishing Company Ltd., New Delhi.5. S. Kalpakajian, “Manufacturing Engineering and Technology”, Pearson Education, Noida.6. Lindberg Roy, “Process and Materials of Manufacture”, Pearson - Allyn and Bacon.7. O. P. Khanna, “Production Technology: Volume 2”, Dhanpatrai& Company Pvt. Ltd., Delhi.8. E. P. DeGarmo, J. T Black, R. A. Kohser, "Materials and Processes in Manufacturing",

Prentice Hall of India, New Delhi.9. G.F. Benedict, Marcel Dekker, "Nontraditional Manufacturing Processes", Inc. New York.

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 18

Reading Materials, web materials with full citations:

http://nptel.ac.in/courses/112107077/ http://www.learnerstv.com/Free-Engineering-Video-lectures-ltv831-Page1.htm http://www.sme.org/fmp/ http://iitvids.blogspot.in/2012/12/manufacturing-processes-ii.html

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 19

Course Title SOFTWARE LAB - III

Course Code ME613

Course Credit

Lecture : 00

Practical : 01

Tutorial : 00

Total : 01

Course Learning Outcomes

After successful completion of the course, students will be able to: Enumerate the methods of FEA for static and dynamic analysis. Understand the concepts of FEA and FEA software interface. Produce problem specifications, description and approach to the problems of FEA. Analyze the data, obtain after processing the given problem definition.

Detailed SyllabusSr.No. Name of chapter & Details Hours

Allotted1 Introduction to FEA:

Concepts of FEA, basics of static and dynamic analysis, elements type, boundaryand loading conditions, FEA of structural elements

02

2 Introduction to FEA software:Preparing screen, formats and conventions used, task steps, action sub steps,picking graphics, interim result graphics, job name and preferences, choosing atutorial, glossary, exit program

02

3 Structural tutorials:Static analysis, problem specification, problem description, given data, approachand assumptions, summary of steps, build geometry, define materials, generatemesh, apply loads, obtain solution, review results

08

4 Thermal tutorials:Problem specification, problem description, given data, approach and assumptions,summary of steps, prepare for a thermal analysis, input geometry, define materials,generate mesh, apply loads, obtain solution, review results

08

5 Explicit dynamics tutorials:Problem specification, problem description, define analysis type, Input geometry,define element type, real constants, material model properties, generate mesh, applyloads, obtain solution, review results

08

Total 28

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 20

Instructional Method and Pedagogy:

Entire syllabus is to be covered in practical hours and it is not part of theory exam. Assignments / exercises based on course content will be given to the students at the end of

each unit/topic and will be evaluated at regular interval. For each lab session first the training session would be held and then hands on session would

be executed.

Reference Books:

1. Tickoo Sham, “Ansys Workbench 14.0 for Engineers and Designers”, Dreamtech press, NewDelhi

2. J. N. Reddy, “Finite Element Method”, Tata McGraw-Hill, New Delhi3. SaeedMoaveni, “Finite Element Analysis Theory and application with Ansys”, Pearson

Education, Delhi

Additional Resources

http://www.mece.ualberta.ca/tutorials/ansys/ http://www.ansys.com/Industries/Academic/Tools/Curriculum+Resources/Tutorials,+Exampl

es+&+Curriculum http://nptel.ac.in/courses/112106130/ http://www.scribd.com/doc/210430092/University-of-Alberta-Ansys-Tutorials#scribd http://ocw.mit.edu/courses/mechanical-engineering/2-092-finite-element-analysis-of-solids-

and-fluids-i-fall-2009/

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 21

Course Title GAS DYNAMICS (UNIVERSITY ELE. - II)

Course Code ME614

Course Credit

Theory : 03

Practical : 00

Tutorial : 00

Credits : 03

Course Learning Outcomes:

After Successful completion of the above course, students will be able to:

Understand the underlying physical mechanisms of compressible fluid flow. Apply the fundamentals of mathematics to derive compressible flow relations for solution of

fluid flow problems. Determine various flow parameters in different flow regimes with various flow conditions. Apply concepts of normal shock, oblique shock, fanno flow and Rayleigh flow for solving

the real world engineering problems.

Detailed Syllabus

Sr.No. Name of chapter & details Hours

Allotted

SECTION-I

1. Basic ConceptsThermodynamics laws, relation and processes, Properties of fluids(Gases),Continuity equation, Momentum equation, Energy equation, Compressibility, Machnumber, Mach waves, Mach cone, Mach angle, Classification of fluid flow based onMach Number, Concept of static, stagnation and critical state, Stagnation & CriticalProperties.

7

2. Fanno FlowThe fanno curves, Fanno flow equations, Variations of flow properties with ductlength, Tables and charts for fanno flow.

7

3. Rayleigh FlowThe Rayleigh curves, Fundamental equations and Rayleigh flow relations, Variationof flow properties with heat transfer, Maximum heat transfer and choking, Tablesand charts for Rayleigh flow.

7

Total 21

SECTION-II

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 22

4. One Dimensional Isentropic FlowDifferential equations for 1D isentropic flow with area variations, Static, Stagnation& Critical Property relations, Mass flow rate through nozzle, Choking of nozzle,Performance of a nozzle under decreasing back pressure.

7

5. Normal Shock WaveDevelopment of a shock wave, Normal Shock Concept, Impossibility of a shock insubsonic flow, strength of a shock wave, Normal Shock relations, Stagnationpressure ratio and change in entropy across the shock, Moving normal shocks,Tables and charts for normal shock waves.

7

6. Oblique Shock WaveConcept and theory, Oblique Shock relations, Property variations, Supersoniccompression, Tables and charts for oblique shock waves.

7

Total 21

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 23

Instructional method and Pedagogy:

At the start of course, the course delivery pattern, prerequisite of the subject will be discussed. Lectures will be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory. Minimum two internal exams will be

conducted and average of two will be considered as a part of overall evaluation. Assignments based on course content will be given to the students at the end of each unit/topic

and will be evaluated at regular interval. Surprise tests/Quizzes/Seminar/Tutorials will be conducted. Students will be allowed to use Gas tables in exams.

Reference Books:

1) E Rathakrishnan,” Gas Dynamics”, PHI Learning Private Limited.2) E Rathakrishnan, “Applied Gas Dynamics ”, John Wiley & Sons.3) S.M. Yahya, "Fundamentals of Compressible flow", New Age International (P) Limited.4) John David Anderson, "Modern Compressible flow", Tata McGraw-Hill5) Patrick H. Oosthuizen, William E. Carscallen, "Introduction To Compressible Fluid

Flow", Taylor & Francis Group.6) P. K. Nag, “Engineering Thermodynamics”, Tata McGraw-Hill.

Additional Resources

http://nptel.ac.in/downloads/101106044/ http://en.wikipedia.org/wiki/Gas_dynamics http://www.mechanical.in/gas-dynamics-and-jet-propulsion/

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 24

Course Title ENTREPRENEURSHIP (UNIVERSITY ELE. - II )

Course Code MG601

Course Credit

Theory :03

Practical :00

Tutorial :00

Credits :03

Course Learning Outcomes:

After Successful completion of the above course, students will be able to: Understand the concept and process of entrepreneurship. Understand the different ways to start the business. Expose them to ways of finding new ideas for business initiation. Analyze the entrepreneurial quality, competency and motivation required as an entrepreneur. Preparing a business plan which can be considered prerequisite of starting and obtaining

finance.

Detailed Syllabus

Sr.No. Name of chapter & details Hours

Allotted

SECTION-I

1. ENTREPRENEURSHIP: WHAT,WHY AND HOWEntrepreneurship concept, need of entrepreneur, Functions and its importance,Myths about Entrepreneurship, Pros and cons of Entrepreneurship, Process ofEntrepreneurship, Difference between Entrepreneur and Intrapreneur.

07

2 AN ENTREPRENEURTypes of Entrepreneurs, Entrepreneurial values- values, attitude and motivation,mindset of an employee and an entrepreneur, Intrapreneur - Importance in anyorganization.

05

3 INITIATE ENTREPRENEURSHIP JOURNEYSelf assessment of qualities, skills, resources and dreams, generation of ideas,feasibility report, opportunity assessment, Role of society and family in thegrowth of an entrepreneur, challenges faced by the entrepreneur, Risk takingconcept and Role of technology/social media in creating new firms.

07

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 25

4 PREPARING BUSINESS PLANBusiness plan: Concept, methods, analysis and interpretation, Sources of finance,Financial statements, Feasibility studies- Financial, Technical, Environmental andMarketing.

05

Total 24

SECTION-II

5 UNDERSTANDING THE MARKETConcept of market, Traditional and E-Commerce, Types of Business -Manufacturing, trading and services, Market forces – Sellers, Consumers andcompetitors, Expanding market- Local to global strategies needed, Pricing andfactors affecting pricing and Marketing Mix.

08

6 FINANCING AND ACCOUNTINGNeed, Source of Finance, Term loans, capital structure, Financial Institution,Costing, BEP, Overview of taxes (Income tax, Excise Duty, Sales tax etc.)

08

7 MANAGEMENT OF ENTERPRISEIntroduction to Human resource management: planning, job analysis, training,recruitment and selection etc., Institutional support towards development ofentrepreneurship in India, technical consultancy organizations, governmentpolicies for small scale enterprise.

08

Total 24

Instructional Method and Pedagogy:

Main Instructional method will be conducted by usage of Power point presentation alongwith Chalk-duster.

Brain storming, case studies, role plays and managerial games related to Entrepreneurshipwill be conducted during the sessions.

Assignments based on course content will be given to the students at the end of eachunit/topic and will be evaluated at regular interval.

Surprise tests/Quizzes will be conducted. Guest lectures and experts may be called for sharing their experience.

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 26

Reference Books:

1. Robert D. Hisrich, Michale P Peters and Dean A sheperd, ‘Entrepreneurship’ , Tata McGrawHill, Latest edition.

2. P.C. Jain , ‘Handbook of New Entrepreneurs’, Oxford University Press, latest edition.3. Paul Trot, ‘Innovation Management and New Product Development, Pearson Education,

Latest Edition.4. Ram Chandra, ‘Entrepreneurial Development’, Tata McGraw Hill, New Delhi5. Saini, J. S., ‘Entrepreneurial Development Programmes and Practices’ , Deep & Deep

Publications (P), Ltd.6. Khanka, S S. ‘Entrepreneurial Development’, S Chand & Company Ltd. New Delhi.7. Badhai, B ‘Entrepreneurship for Engineers’, Dhanpat Rai & co. (p) Ltd.8. Desai, Vasant, ‘ Project Management and Entrepreneurship’, Himalayan Publishing House,

Mumbai, 2002.9. Gupta and Srinivasan, ‘Entrepreneurial Development’, S Chand & Sons, New Delhi.

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 27

Course Title CAMPUS TO CORPORATE TRAINING – 2(UNIVERSITY ELE. - II )

Course Code CD605

Course Credit

Theory :03

Practical :00

Tutorial :00

Credits :03

Course Learning Outcomes:

At the end of the course, students will be able to :● Develop their comprehensive approach on job skills & they will be ready for placements.● Understand the importance of Portfolio & Resume preparation and apply the techniques

to develop their individual documents.● Assess their individual skills and develop all IFS on the basis of their strength areas.● Evaluate how to perform During GD & how to stand out of the Crowd.● Cultivate Public Speaking Skills and overcome with the stage fear.● Employ all the IFS skills during mock interview.

Detailed Syllabus

Sr.No. Name of chapter & details Hours

Allotted

VERBAL ABILITY

1. Verbal Ability Understand and apply techniques to develop their verbal ability skills Spotting errors, selecting words, Idioms and phrases, Verbal analogies,

synonyms, sentence corrections, ordering of sentences, antonyms, change ofspeech.

8

ESSAY WRITING

2. Report Writing Analyse and identify the techniques of report writing Sketch the layout of report writing on the basis of the

video/statistics/charts Organize the ideas/views and draft the report/essay

4/5

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 28

INTERVIEW READINESS

3. CV/ Resume Building Understand the format and design of the documents. Apply Lexical showcasing their individual skills Design their own document

3

4. Cover Letter & Research on Company details Identify the importance of a job profile from different companies. Assess their own cover letter based on the power verbs from the job profile. Reproduce the document highlighting the requisite areas

2

5. Presentation Skill Classify the do’s and don’ts of presentation skills. Locate the technique for handling questions during presentation. Analyse their presentation based on the vision and mission of a company Employ the skills acquired in delivering the presentation.

3

6. Grooming & Communication Skills Understand the importance of the first impression Apply good grooming habits for corporate culture Locate gender inferiority problems if any Review importance of gestures and body language Dramatize the developed skills to overcome cross cultural sensitivity Discriminate the traits creating barrier in communication

2

7. FAQs & Open Ended Questions Understand and analyse the significance of nonverbal skills while facing

interview. Apply the identified techniques handling stressful situation Self-assess their individual strengths/weakness based on the key skills to

handle FAQs

8

GROUP DISCUSSION

8. Interpersonal Skill – GD Understand the concept of GD over a Debate. Locate the importance of Interpersonal Skills in a GD Demonstrate the acquired skill in role-plays Analyse the key areas of improvement after demonstrating

4

NON – VERBAL ABILITY

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 29

9. Series, Analytical Reasoning, Embedded Images: Understand the types of problems asked in company tests. Apply the identified techniques Recognize the steps Solve the problems with time management

3

10. Paper Folding, Image Analysis, Mirror Images, Shape Construction: Understand the types of problems asked in company tests. Understand the short cut methods Apply the identified techniques Recognize the steps Solve the problems with time management

3

11. Analogy, Pattern Completion, Paper Cutting, Dot Situation : Understand the types of problems asked in company tests. Recognize the steps Understand the short cut methods Solve the problems with time management

2

12. Cubes and Dice, Classification, Water Images, Figure Matrix Understand the types of problems asked in company tests. Understand the short cut methods Recognize the steps Solve the problems with time management

3

Total 45

Instructional method and Pedagogy:

1. Participative – Student Centric Learning Method2. Activities and Role Plays and Audio-Visual tools will be used to enhance student

participation.

Additional Resources

www.indiabix.com

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 30

Course Title ENGLISH AS A SECOND LANGUAGE - ADVANCEDLEVEL 2 (UNIVERSITY ELECTIVE - II)

Course Code ESL601

Course Credit

Lecture : 03

Practical : 00

Tutorial : 00

Total : 03

Course Objective

Students will be able to understand conversations made in native accent by listening recordedconversations from real world context.

Students will be able to describe people, place and situation using descriptive adjectives andwill be able to make inquiries, reservation and order things over phone.

Students will practice reading to extract useful information and to comprehend variousinformative texts through skimming.

Students will be able to write a paragraph based on the data compiled using appropriateformat and tone and will be able to write letters (with cover letter), emails to invite, thankand express appreciation.

Students will be able to understand the importance of language in social media. Further, theywill be able to use the jargons, SMS lingo in social media.

Detailed SyllabusSr.No. Name of chapter & Details Hours

AllottedSection – I

1 Listen to learn - 2:

Listening audios of recorded tapes, telephonic conversation, descriptive audiosetc. to pick up foreign accent by identifying the phonemes of certain letters like 't','k', 'p' etc.

5

2 Tell me about...:

Appropriate usage of adjectives to describe one's native, region, educationalinstitute, family, friends, role models and various instances or situations.

8

3 Telephoning in English :

Appropriate usage of language for making enquiries, reservations and orders.

5

4 Skim through the text : 5

2016-17 B.TECH 6TH SEM MECHANICAL (2014-18 BATCH)Page 31

Company reports, overview reading and other related material that is meant togive bird eye view.

Total 23Section – II

5 Read to interpret :

Pie charts, graphs, tabular data and other visual data that requires interpretation.

4

6 Write to document :

Recording process and experiments. Writing paragraph from tabular data, chartsand graphs.

7

7 Learn to Correspond :

Writing cover letter. Writing letters or emails of invitation thanking andexpressing appreciation.

8

8 Be a Face book-worm :

Appropriate usage of jargons and language precision to comment and post onsocial media.

3

Total 22