school of industrial engineering and management · 2019. 9. 24. · vietnam and a member of vietnam...
TRANSCRIPT
School of Industrial Engineering and Management
0 | P a g e
SCHOOL OF INDUSTRIAL
ENGINEERING AND
MANAGEMENT
STUDENT’S HANDBOOK
INTERNATIONAL UNIVERSITY
VIETNAM NATIONAL UNIVERSITY HCMC
BLOCK 6, LINH TRUNG WARD, THU DUC DISTRICT, HCMC
School of Industrial Engineering and Management
School of Industrial Engineering and Management
Table of Contents
1. INTRODUCTION ............................................................................................. 1
2. SCHOOL OF INDUSTRIAL ENGINEERING AND MANAGEMENT ..... 3
2.1 Vision ........................................................................................................... 3
2.2 Mission......................................................................................................... 3
2.3 Program Objectives.................................................................................... 3
2.4 Expected Learning Outcomes ................................................................... 4
2.5 Career Opportunities ................................................................................. 4
2.6 Programs ..................................................................................................... 5
2.7 Course Design ............................................................................................. 5
2.8 Scholarship .................................................................................................. 6
2.9 Course Assessment ..................................................................................... 6
2.10 Grading system ........................................................................................... 7
IU ISE PROGRAM................................................................................................... 8
3. IU ISE PROGRAM (for batch 2016) ............................................................... 9
3.1 English Level 1: TOEFL ≥ 500.................................................................. 9
3.2 English Level 2: 430 ≤ TOEFL < 500 ..................................................... 16
3.3 English Level 3: TOEFL < 430 .............................................................. 22
4. IU ISE PROGRAM (for batch 2017 and 2018) ............................................ 28
4.1 English Level 1: TOEFL ≥ 500................................................................ 28
4.2 English Level 2: 430 ≤ TOEFL < 500 ..................................................... 33
4.3 English Level 3: TOEFL < 430 ............................................................... 38
5. IU ISE PROGRAM (for batch 2019 and forwards) ..................................... 44
School of Industrial Engineering and Management
5.1 English Level 1: TOEFL ≥ 500................................................................ 44
5.2 English Level 2: 430 ≤ TOEFL < 500 ..................................................... 49
5.3 English Level 3: TOEFL < 430 ............................................................... 55
LOGISTICS & SCM PROGRAM ........................................................................ 61
6. LOGISTICS & SCM PROGRAM (for batch 2016, 2017, 2018)................. 62
6.1 English Level 1: TOEFL ≥ 500................................................................ 62
6.2 English Level 1: 430 ≤ TOEFL < 500 ..................................................... 69
6.3 English Level 3: TOEFL < 430 ............................................................... 77
7. LOGISTICS & SCM PROGRAM (for batch 2019 and forwards)............. 83
7.1 English Level 1: TOEFL ≥ 500................................................................ 83
7.2 English Level 1: 430 ≤ TOEFL < 500 ..................................................... 91
7.3 English Level 3: TOEFL < 430 ............................................................... 97
TWINNING PROGRAM ..................................................................................... 103
8. IU-RG (Rutgers University) PROGRAM (For batch 2014 and forwards)
………………………………………………………………………………. 104
8.1 English Level 1: TOEFL ≥ 500.............................................................. 104
8.2 English Level 1: 430 ≤ TOEFL < 500 ................................................... 106
8.3 English Level 1: TOEFL < 430 ............................................................. 108
9. IU-SB PROGRAM (The State University of New York, University at
Binghamton) (For batch 2017 and forwards) ..................................................... 111
9.1 English Level 1: TOEFL ≥ 500.............................................................. 111
9.2 English Level 1: 430 ≤ TOEFL < 500 ................................................... 113
9.3 English Level 1: TOEFL < 430 ............................................................. 116
School of Industrial Engineering and Management
10. COURSE DESCRIPTION ........................................................................ 118
DISCIPLINARY PROCEDURES & RIGHTS .................................................. 145
NỘI QUY SINH VIÊN ...................................................................................... 146
A1. QUY ĐỊNH CHUYỂN ĐỔI CHƯƠNG TRÌNH ..................................... 149
A2. QUI CHẾ ĐÀO TẠO THEO HỌC CHẾ TÍN CHỈ - BẬC ĐẠI HỌC .. 151
A4. ĐĂNG KÝ MÔN HỌC .............................................................................. 160
A5. ĐÁNH GIÁ VÀ XỬ LÝ KẾT QUẢ HỌC TẬP ....................................... 166
TIÊU CHÍ XÉT HỌC BỔNG KHUYẾN KHÍCH HỌC TẬP TỪ KHÓA 2011
............................................................................................................................. 177
A6. CÁC FORM MẪU CẦN THIẾT .............................................................. 181
School of Industrial Engineering and Management
School of Industrial Engineering and Management
1 | P a g e
1. INTRODUCTION
The International University (IU) is the first public International University of
Vietnam and a member of Vietnam National University – Ho Chi Minh City (VNU).
The IU is currently striving to become a prestigious research institution and training
high quality human resources for the country. It is fully empowered to award all
degrees from undergraduate to post graduate levels. Its internationality is reflected in
international academic environment of IU as a whole, including all degree programs,
teaching staff, languages of instruction, academic and research infrastructure. Its
publicity is reflected in the long-term support from the government and other
funding agencies and organizations at all levels – from local national to regional and
international.
Schools and Departments
• School of Industrial Engineering and Management
• School of Biotechnology
• School of Business
• School of Computer Science and Engineering
• School of Electrical Engineering
• School of Biomedical Engineering
• Department of Civil Engineering
• Department of English
• Department of Mathematics
School of Industrial Engineering and Management
2 | P a g e
• Department of Physics
• Department of Environmental Engineering
School of Industrial Engineering and Management
3 | P a g e
2. SCHOOL OF INDUSTRIAL ENGINEERING AND MANAGEMENT
2.1 Vision
Take leading in education, research and transfer in the field of Advanced
Technologies and Management.
2.2 Mission
Develop high-quality undergraduate, graduate and PhD education in the field of
Advanced Technologies and Management to meet regional and international
standards.
2.3 Program Objectives
1. Be practicing engineers in the field of production and services, who are able
to:
(i) Design or redesign Industrial, Logistics & Supply Chain systems
(ii) Operate and manage Industrial, Logistics & Supply Chain systems
(iii) Improve the existing Industrial, Logistics & Supply Chain systems
(iv) Support for wise decision making
2. Engage in lifelong learning to maintain and enhance professional skills
3. Work effectively with people and demonstrate leadership, professional skills
and ethical behavior in the workplace
4. Fulfill the needs of community and industrial sector of Vietnam in solving
technical and management problems using industrial and systems engineering
principles, tools and techniques.
School of Industrial Engineering and Management
4 | P a g e
2.4 Expected Learning Outcomes
a. An ability to apply knowledge of mathematics, science and engineering
b. An ability to design and conduct experiments, as well as to analyze and
interpret data
c. An ability to design a system, component, or process to meet desired needs
within realistic constraints such as economic, environmental, social, political,
ethical, health and safety, manufacturability, and sustainability
d. An ability to function in multidisciplinary teams
e. An ability to identify, formulate, model and simulate and solve industrial and
systems problems
f. An understanding of professional and ethical responsibility
g. An ability to communicate effectively
h. The broad education necessary to understand the impact of engineering
solutions in a global, economic, environmental, and societal context
i. A recognition of the need for, and an ability to engage in life-long learning
j. A knowledge of contemporary issues and ability to self-update
k. An ability to use the techniques, skills, and modern engineering tools
necessary for engineering practice
2.5 Career Opportunities
IEM engineers can take on and perform excellently tasks in various fields, namely
Logistics & Supply Chain Management, Procurement Management, Project
Management, Inventory Management, Quality Management, Production
Management, Optimization in Production and Service, developing an integrated
solution to reduce the operation cost, etc. Qualified graduated engineers can achieve
the top-level positions in organizations such as Production Director and Chief
Executive Officer.
School of Industrial Engineering and Management
5 | P a g e
2.6 Programs
School of Industrial Engineering and Management has two different programs:
Industrial and Systems Engineering (ISE) and Logistics and Supply Chain
Management (LSCM).
• ISE trains students to be engineers who have ability to design, operate,
coordinate, manage production systems and services to create products and
services.
• LSCM trains students to be engineers who have ability to design, operate,
coordinate, manage activities in Logistics and supply chain. These systems
support the supply and storage of raw materials for production, services,
distribution and delivery the finished goods to customers.
2.7 Course Design
The course of the B.S Degree in ISE & LSCM in the IU – VNU HCM provides the
students the flexibility to join either the IU program (4 years at IU) or the twining
program (2 years at IU and 2 years at Rutgers University, or at University
Binghamton, the State University of New York). Students will receive bachelor
degree awarded by the IU if taking the IU program and bachelor degree awarded by
the overseas partner universities if taking the twining program.
The IEM programs are designed with consideration of students’ English level which
is estimated on TOEFL or TOEFL IBT scores. First year students are classified into
three levels:
• English level 1: TOEFL ≥ 500 (TOEFL IBT ≥ 60 or IELTS > 6.5): Students
are admitted to take full program.
School of Industrial Engineering and Management
6 | P a g e
• English level 2: 430 ≤ TOEFL < 500 (40 ≤ TOEFL IBT < 60): Students are
admitted to take partial program together with English preparation classes
(IE2).
• English level 3: TOEFL < 430 (TOEFL IBT < 40): Students are required to
take only intensive English course (IE1) for the first semester of the first year
at school.
• (See more on the curricula of different IEM programs)
2.8 Scholarship
Students with entrance examination scores equal or above 25 are eligible to receive
full scholarship which is worth 168.000.000 VND (~ $6,000 USD) for the whole
course (4 years for domestic programs and 2 years for twinning programs). Partial
scholarship, which is worth 84.000.000 VND (~ $ 3,000 USD for the whole course),
is offered to students with entrance examination scores from 24 to 25. To maintain
the scholarship throughout the whole course, students need to keep their GPA equal
or above 70 and scores of all subjects equal or above 50.
To encourage students with good merits, each semester the International University
spends around 24,000 USD awarding those who achieve excellent merits in the
second semester of the first year. Every semester, 40 scholarships, each worth
12.620.000 VND (~ 600 USD), are granted to the best students who receive neither
full nor partial scholarships.
2.9 Course Assessment
• Mid-term exam: 10% - 20%
• Final exam: 40% - 60%
• Others (e.g. In-class quizzes, group presentation, etc): 20% - 40%`
School of Industrial Engineering and Management
7 | P a g e
2.10 Grading system
Classification 100-Point Grading 4-Point
Grading
Alphabet
Grading
Passing
Excellent 85 <= GPA <= 100 4.0 A
Very Good 75 <= GPA < 85 3.75 A-
Good 65 <= GPA < 75 3.5 B+
Fair 60 <= GPA < 65 3.0 B
Fair-Good 55 <= GPA < 60 2.5 C+
Average 50 <= GPA < 55 2.0 C
No Passing
Weak 30 <= GPA <= 50 1.3 D+
Very weak 10 <= GPA <= 30 1.0 D
Bad GPA <= 10 0 F
School of Industrial Engineering and Management
School of Industrial Engineering and Management
8 | P a g e
IU ISE PROGRAM
School of Industrial Engineering and Management
9 | P a g e
3. IU ISE PROGRAM (for batch 2016)
3.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 144 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007IU Writing AE1 2 EN011IU Writing AE2 2
EN008IU Listening AE1 2 EN012IU Speaking AE2 2
MA001IU Calculus 1 4 MA003IU Calculus 2 4
PH013IU Physics 1 2 PE008IU Critical Thinking 3
PH014IU Physics 2 2 PT002IU Physical Training 2 3
PT001IU Physical Training 1 3 IS001IU
Introduction to
Industrial
Engineering
1
CH011IU Chemistry for
Engineers 3 IS054IU
Engineering
Drawing 3
PH015IU Physics 3 3
Total Credits 18 Total Credits 21
School of Industrial Engineering and Management
10 | P a g e
Summer Semester Crds
PE011IU Principles of
Marxism 5
PE012IU HCM’ s thoughts 2
PE013IU
Revolutionary
Lines of
Vietnamese
Communist Party
3
Total Credits 10
School of Industrial Engineering and Management
11 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 IS077IU
Introduction to
Programming –
C++/C#, Python
2
IS019IU Production
Management 3 IS020IU
Engineering
Economy 3
IS076IU
Introduction to
Computing -
Matlab Application
3 IS081IU Deterministic
models in OR 4
IS004IU
Engineering
Probability &
Statistics
4 IS017IU Work design &
Ergonomics + Lab 4
MA023IU Calculus 3 4 IS034IU Product Design &
Development 3
IS016IU
Engineering
Mechanics –
Dynamics
3 MA029IU Differential
Equations for ISE 2
Total Credits 19 Total Credits 18
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
12 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
IS040IU
Management
Information
System
3 IS079IU Scientific Writing 2
IS025IU Quality
Management 3 IS028IU
Simulation Models
in IE 4
IS026IU Project
Management 3 IS027IU
Scheduling &
Sequencing 3
IS024IU Probabilistic
Models in OR 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS___IU
ISE Elective
Course (choose 1
course below)
3 IS___IU
ISE Elective
Course (choose 1
course below)
3
IS031IU Experimental
Design 3 IS044IU
Computer Control
Manufacturing
Systems
3
IS018IU CAD/CAM 3 IS068IU Procurement
Management 3
IS058IU
Time series &
forecasting
technique
3
Total Credits 15 Total Credits 15
School of Industrial Engineering and Management
13 | P a g e
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
14 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Project 1 IS048IU Thesis research 10
IS033IU Multi-Criteria
Decision Making 3
IS041IU Lean Production 3
IS032IU Facility Layout 3
IS___IU
ISE Elective
Course (choose 3
course below)
9
IS080IU Creative Thinking 3
IS035IU Systems
Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
School of Industrial Engineering and Management
15 | P a g e
IS062IU
E-Logistics in
Supply Chain
Management
3
Total Credits 19 Total Credits 10
School of Industrial Engineering and Management
16 | P a g e
3.2 English Level 2: 430 ≤ TOEFL < 500
TOTAL CREDITS: 159 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN074IU Reading & writing
IE2 8 EN007IU Writing AE1 2
EN075IU Listening &
speaking IE2 8 EN008IU Listening AE1 2
PT001IU Physical Training 1 3 CH011IU Chemistry for
Engineers 3
MA001IU Calculus 1 4 PH014IU Physics 2 2
PH013IU Physics 1 2 PT002IU Physical Training 2 3
MA003IU Calculus 2 4
IS001IU
Introduction to
Industrial
Engineering
1
IS054IU Engineering
Drawing 3
Total Credits 25 Total Credits 20
School of Industrial Engineering and Management
17 | P a g e
Summer Semester Crds
PE011IU Principles of
Marxism 5
PE012IU HCM’ s thoughts 2
PE013IU
Revolutionary
Lines of
Vietnamese
Communist Party
3
Total Credits 10
School of Industrial Engineering and Management
18 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 IS077IU
Introduction to
Programming –
C++/C#, Python
2
IS019IU Production
Management 3 IS020IU
Engineering
Economy 3
IS076IU
Introduction to
Computing –
Matlab Application
3 IS081IU Deterministic
models in OR 4
IS004IU
Engineering
Probability &
Statistics
4 IS017IU Work design &
Ergonomics + Lab 4
IS016IU
Engineering
Mechanics –
Dynamics
3 IS034IU Product Design &
Development 3
EN011IU Writing AE2 2 MA029IU Differential
Equations for ISE 2
EN012IU Speaking AE2 2 MA023IU Calculus 3 4
PE008IU Critical Thinking 3
Total Credits 22 Total Credits 22
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
19 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PH015IU Physics 3 3 IS079IU Scientific Writing 2
IS040IU Management
Information System 3 IS028IU
Simulation Models
in IE 4
IS025IU Quality
Management 3 IS027IU
Scheduling &
Sequencing 3
IS026IU Project
Management 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS024IU Probabilistic
Models in OR 3 IS___IU
ISE Elective
Course (choose 1
course below)
3
IS___IU
ISE Elective
Course (choose 1
course below)
3 IS068IU Procurement
Management 3
IS031IU Experimental
Design 3 IS044IU
Computer Control
Manufacturing
Systems
3
IS018IU CAD/CAM 3
IS058IU
Time series &
forecasting
technique
3
Total Credits 18 Total Credits 15
School of Industrial Engineering and Management
20 | P a g e
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
21 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS033IU Multi-Criteria
Decision Making 3 IS048IU Thesis research 10
IS041IU Lean Production 3
IS032IU Facility Layout 3
IS___IU
ISE Elective
Course (choose 3
courses below)
9
IS080IU Creative Thinking 3
IS035IU Systems
Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
IS062IU
E-Logistics in
Supply Chain
Management
3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
22 | P a g e
3.3 English Level 3: TOEFL < 430
TOTAL CREDITS: 181 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN072IU Reading & Writing
IE1 11 EN074IU
Reading &
writing IE2 8
EN073IU Listening & Speaking
IE1 11 EN075IU
Listening &
speaking IE2 8
PT001IU Physical Training 1 3 PT002IU Physical
Training 2 3
IS001IU
Introduction to
Industrial
Engineering
1
MA001IU Calculus 1 4
Total Credits 25 Total Credits 24
Summer Semester Crds
PE011IU Principles of Marxism 5
PE012IU HCM’ s thoughts 2
PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
Total Credits 10
School of Industrial Engineering and Management
23 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 CH011IU
Chemistry for
Engineers 3
EN007IU Writing AE1 2 IS081IU Deterministic
models in OR 4
EN008IU Listening AE1 2 EN011IU Writing AE2 2
IS004IU
Engineering
Probability &
Statistics
4 EN012IU Speaking AE2 2
PH013IU Physics 1 2 PE008IU Critical
Thinking 3
PH014IU Physics 2 2 IS054IU Engineering
Drawing 3
MA003IU Calculus 2 4 MA023IU Calculus 3 4
MA027IU Applied Linear
Algebra 2
Total Credits 18 Total Credits 21
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
24 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PH015IU Physics 3 3 IS077IU
Introduction to
Programming –
C++/C#, Python
2
IS019IU Production
Management 3 IS020IU
Engineering
Economy 3
IS076IU
Introduction to
Computing - Matlab
Application
3 IS017IU
Work design &
Ergonomics +
Lab
4
IS040IU Management
Information System 3 IS034IU
Product Design
& Development 3
IS025IU Quality Management 3 MA029IU
Differential
Equations for
ISE
2
IS016IU
Engineering
Mechanics –
Dynamics
3 IS___IU
ISE Elective
Course (choose
1 course below)
3
IS___IU
ISE Elective Course
(choose 1 course
below)
3 IS044IU
Computer
Control
Manufacturing
Systems
3
IS031IU Experimental Design 3 IS068IU Procurement
Management 3
IS018IU CAD/CAM 3
School of Industrial Engineering and Management
25 | P a g e
IS058IU Time series &
forecasting technique 3
PH015IU Physics 3 3
Total Credits 21 Total Credits 17
School of Industrial Engineering and Management
26 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS033IU Multi-Criteria
Decision Making 3 IS028IU
Simulation
Models in IE 4
IS026IU Project Management 3 IS027IU Scheduling &
Sequencing 3
IS024IU Probabilistic Models
in OR 3 IS032IU Facility Layout 3
IS041IU Lean Production 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS___IU
ISE Elective Course
(choose 3 courses
below)
9 IS079IU Scientific
Writing 2
IS080IU Creative Thinking 3
IS035IU Systems Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
School of Industrial Engineering and Management
27 | P a g e
IS067IU
International
Transportation &
Logistics
3
IS062IU E-Logistics in Supply
Chain Management 3
Total Credits 21 Total Credits 15
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
Senior Year (Year 5)
Semester 9 Crds
IS048IU Thesis research 10
Total Credits 10
School of Industrial Engineering and Management
28 | P a g e
4. IU ISE PROGRAM (for batch 2017 and 2018)
4.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 146 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007IU Writing AE1 2 EN011IU Writing AE2 2
EN008IU Listening AE1 2 EN012IU Speaking AE2 2
MA001IU Calculus 1 4 MA003IU Calculus 2 4
PH013IU Physics 1 2 PT002IU Physical Training 2 3
PH014IU Physics 2 2 IS001IU
Introduction to
Industrial
Engineering
1
PT001IU Physical Training 1 3 IS054IU Engineering
Drawing 3
CH011IU Chemistry for
Engineers 3 PH015IU Physics 3 3
PE008IU Critical Thinking 3
Total Credits 18 Total Credits 21
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
School of Industrial Engineering and Management
29 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 IS020IU
Engineering
Economy 3
IS019IU Production
Management 3 IS081IU
Deterministic
models in OR 4
IS076IU
Introduction to
Computing -
Matlab Application
3 IS017IU Work design &
Ergonomics + Lab 4
IS004IU
Engineering
Probability &
Statistics
4 IS077IU
Introduction to
Programming –
C++/C#, Python
2
MA023IU Calculus 3 4 IS034IU Product Design &
Development 3
PE012IU HCM’ s thoughts 2 PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
IS016IU
Engineering
Mechanics –
Dynamics
3 MA029IU Differential
Equation 2
Total Credits 21 Total Credits 21
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
30 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
IS040IU Management
Information System 3 IS079IU Scientific Writing 2
PE014IU Environmental
Science 3 IS028IU
Simulation Models
in IE 4
IS025IU Quality
Management 3 IS027IU
Scheduling &
Sequencing 3
IS026IU Project
Management 3 IS041IU Lean Production 3
IS024IU Probabilistic
Models in OR 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS___IU
ISE Elective
Course (choose 1
course below)
3
IS031IU
Experimental
Design 3
IS018IU CAD/CAM 3
IS058IU
Time series &
forecasting
techniques
3
Total Credits 18 Total Credits 15
School of Industrial Engineering and Management
31 | P a g e
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS048IU Thesis research 10
IS033IU Multi-Criteria
Decision Making 3
IS032IU Facility Layout 3
IS___IU
ISE Elective
Course (choose 3
courses below)
9
IS080IU Creative Thinking 3
IS035IU Systems
Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
School of Industrial Engineering and Management
32 | P a g e
IS062IU
E-Logistics in
Supply Chain
Management
3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
33 | P a g e
4.2 English Level 2: 430 ≤ TOEFL < 500
TOTAL CREDITS: 162 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN074IU Reading & writing
IE2 8 EN007IU Writing AE1 2
EN075IU Listening &
speaking IE2 8 EN008IU Listening AE1 2
PT001IU Physical Training 1 3 PH013IU Physics 1 2
MA001IU Calculus 1 4 CH011IU Chemistry for
Engineers 3
PT002IU Physical Training 2 3
PH014IU Physics 2 2
MA003IU Calculus 2 4
IS001IU
Introduction to
Industrial
Engineering
1
IS054IU Engineering
Drawing 3
Total Credits 23 Total Credits 22
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
School of Industrial Engineering and Management
34 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 IS020IU
Engineering
Economy 3
IS019IU Production
Management 3 IS081IU
Deterministic
models in OR 4
IS076IU
Introduction to
Computing -
Matlab
3 IS017IU Work design &
Ergonomics + Lab 4
IS004IU
Engineering
Probability &
Statistics
4 IS077IU
Introduction to
Programming –
C++/C#, Python
2
IS016IU
Engineering
Mechanics –
Dynamics
3 IS034IU Product Design &
Development 3
MA023IU Calculus 3 4 PE008IU Critical Thinking 3
EN011IU Writing AE2 2
EN012IU Speaking AE2 2 MA029IU Differential
Equation 2
Total Credits 23 Total Credits 21
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
35 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PH015IU Physics 3 3 IS079IU Scientific Writing 2
IS040IU Management
Information System 3 IS028IU
Simulation Models
in IE 4
PE014IU Environmental
Science 3 IS027IU
Scheduling &
Sequencing 3
IS025IU Quality
Management 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS026IU Project
Management 3 PE012IU HCM’ s thoughts 2
IS024IU Probabilistic
Models in OR 3 PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
IS___IU
ISE Elective
Course (choose 1
course below)
3 IS041IU Lean Production 3
IS031IU Experimental
Design 3
IS018IU CAD/CAM 3
IS058IU
Time series &
forecasting
technique
3
Total Credits 21 Total Credits 20
School of Industrial Engineering and Management
36 | P a g e
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
37 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS048IU Thesis research 10
IS033IU Multi-Criteria
Decision Making 3
IS032IU Facility Layout 3
IS___IU
ISE Elective
Course (choose 3
courses below)
9
IS080IU Creative Thinking 3
IS035IU Systems
Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
BA146IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
IS062IU
E-Logistics in
Supply Chain
Management
3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
38 | P a g e
4.3 English Level 3: TOEFL < 430
TOTAL CREDITS: 181 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN072IU Reading & Writing
IE1 11 EN074IU
Reading &
writing IE2 8
EN073IU Listening & Speaking
IE1 11 EN075IU
Listening &
speaking IE2 8
PT001IU Physical Training 1 3 PT002IU Physical
Training 2 3
IS001IU
Introduction to
Industrial
Engineering
1
MA001IU Calculus 1 4
Total Credits 25 Total Credits 24
Summer Semester Crds
PE011IU Principles of Marxism 5
Total Credits 5
School of Industrial Engineering and Management
39 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 CH011IU
Chemistry for
Engineers 3
EN007IU Writing AE1 2 IS081IU Deterministic
models in OR 4
EN008IU Listening AE1 2 EN012IU Speaking AE2 2
IS004IU
Engineering
Probability &
Statistics
4 EN011IU Writing AE2 2
PE008IU Critical Thinking 3 IS054IU Engineering
Drawing 3
PH013IU Physics 1 2 PE012IU HCM’ s
thoughts 2
PH014IU Physics 2 2 MA023IU Calculus 3 4
MA003IU Calculus 2 4
Total Credits 21 Total Credits 20
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
40 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PH015IU Physics 3 3 IS076IU
Introduction to
Computing-
Matlab
3
IS084IU Environmental
Science 3 IS020IU
Engineering
Economy 3
IS019IU Production
Management 3 IS017IU
Work design &
Ergonomics +
Lab
4
IS077IU
Introduction to
Programming –
C++/C#, Python
2 IS034IU Product Design
& Development 3
IS040IU Management
Information System 3 IS041IU Lean Production 3
IS016IU
Engineering
Mechanics –
Dynamics
3 PE013IU
Revolutionary
Lines of
Vietnamese
Communist
Party
3
IS025IU Quality Management 3 MA029IU Differential
Equation 2
IS___IU
ISE Elective Course
(choose 1 course
below)
3
IS031IU Experimental Design 3
School of Industrial Engineering and Management
41 | P a g e
IS018IU CAD/CAM 3
IS058IU Time series &
forecasting technique 3
Total Credits 23 Total Credits 18
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
42 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS028IU Simulation
Models in IE 4
IS033IU Multi-Criteria
Decision Making 3 IS027IU
Scheduling &
Sequencing 3
IS026IU Project Management 3 IS032IU Facility Layout 3
IS024IU Probabilistic Models
in OR 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS___IU
ISE Elective Course
(choose 3 courses
below)
9 IS079IU Scientific
Writing 2
IS080IU Creative Thinking 3
IS035IU Systems Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
School of Industrial Engineering and Management
43 | P a g e
IS062IU E-Logistics in Supply
Chain Management 3
Total Credits 21 Total Credits 15
Senior Year (Year 5)
Semester 9 Crds
IS048IU Thesis research 10
Total Credits 10
School of Industrial Engineering and Management
44 | P a g e
5. IU ISE PROGRAM (for batch 2019 and forwards)
5.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 146 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007IU Writing AE1 2 EN011IU Writing AE2 2
EN008IU Listening AE1 2 EN012IU Speaking AE2 2
MA001IU Calculus 1 4 MA003IU Calculus 2 4
PH013IU Physics 1 2 PE008IU Critical Thinking 3
PH014IU Physics 2 2 PT002IU Physical Training 2 3
PT001IU Physical Training 1 3 IS001IU
Introduction to
Industrial
Engineering
1
CH012IU Chemistry
Laboratory 1 IS054IU
Engineering
Drawing 3
CH011IU Chemistry for
Engineers 3 PH015IU Physics 3 3
Total Credits 19 Total Credits 21
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
School of Industrial Engineering and Management
45 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 IS020IU
Engineering
Economy 3
IS019IU Production
Management 3 IS081IU
Deterministic
models in OR 4
IS086IU Introduction to
Computing 3 IS017IU
Work design &
Ergonomics + Lab 4
IS004IU
Engineering
Probability &
Statistics
4 IS085IU CAD/CAM/CNC 3
MA023IU Calculus 3 4 IS034IU Product Design &
Development 3
PE012IU HCM’ s thoughts 2 PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
IS016IU
Engineering
Mechanics –
Dynamics
3
Total Credits 21 Total Credits 20
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
46 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
IS040IU Management
Information System 3 IS079IU Scientific Writing 2
PE014IU Environmental
Science 3 IS028IU
Simulation Models
in IE 4
IS025IU Quality
Management 3 IS027IU
Scheduling &
Sequencing 3
IS026IU Project
Management 3 IS041IU Lean Production 3
IS024IU Probabilistic
Models in OR 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS___IU
ISE Elective
Course (choose 1
course below)
3
IS031IU Experimental
Design 3
IS087IU Manufacturing
Processes 3
IS058IU
Time series &
forecasting
techniques
3
Total Credits 18 Total Credits 15
School of Industrial Engineering and Management
47 | P a g e
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
48 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS048IU Thesis research 10
IS033IU Multi-Criteria
Decision Making 3
IS032IU Facility Layout 3
IS___IU
ISE Elective
Course (choose 3
courses below)
9
IS080IU Creative Thinking 3
IS035IU Systems
Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
IS062IU
E-Logistics in
Supply Chain
Management
3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
49 | P a g e
5.2 English Level 2: 430 ≤ TOEFL < 500
TOTAL CREDITS: 162 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN074IU Reading & writing
IE2 8 EN007IU Writing AE1 2
EN075IU Listening &
speaking IE2 8 EN008IU Listening AE1 2
PT001IU Physical Training 1 3 CH012IU Chemistry
Laboratory 1
MA001IU Calculus 1 4 CH011IU Chemistry for
Engineers 3
PH013IU Physics 1 2
PH014IU Physics 2 2
PT002IU Physical Training 2 3
MA003IU Calculus 2 4
IS001IU
Introduction to
Industrial
Engineering
1
IS054IU Engineering
Drawing 3
Total Credits 23 Total Credits 23
School of Industrial Engineering and Management
50 | P a g e
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 IS020IU
Engineering
Economy 3
IS019IU Production
Management 3 IS081IU
Deterministic
models in OR 4
IS086IU Introduction to
Computing 3 IS017IU
Work design &
Ergonomics + Lab 4
IS004IU
Engineering
Probability &
Statistics
4 IS085IU CAD/CAM/CNC 3
IS016IU
Engineering
Mechanics –
Dynamics
3 IS034IU Product Design &
Development 3
MA023IU Calculus 3 4 PE008IU Critical Thinking 3
EN011IU Writing AE2 2
EN012IU Speaking AE2 2
Total Credits 23 Total Credits 20
School of Industrial Engineering and Management
51 | P a g e
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
52 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PH015IU Physics 3 3 IS079IU Scientific Writing 2
IS040IU
Management
Information
System
3 IS028IU Simulation Models
in IE 4
PE014IU Environmental
Science 3 IS027IU
Scheduling &
Sequencing 3
IS025IU Quality
Management 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS026IU Project
Management 3 PE012IU HCM’ s thoughts 2
IS024IU Probabilistic
Models in OR 3 PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
IS___IU
ISE Elective
Course (choose 1
course below)
3 IS041IU Lean Production 3
IS031IU Experimental
Design 3
IS087IU Manufacturing
Processes 3
School of Industrial Engineering and Management
53 | P a g e
IS058IU
Time series &
forecasting
technique
3
Total Credits 21 Total Credits 20
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
54 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS048IU Thesis research 10
IS033IU Multi-Criteria
Decision Making 3
IS032IU Facility Layout 3
IS___IU
ISE Elective
Course (choose 3
courses below)
9
IS080IU Creative Thinking 3
IS035IU Systems
Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
BA146IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
IS062IU
E-Logistics in
Supply Chain
Management
3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
55 | P a g e
5.3 English Level 3: TOEFL < 430
TOTAL CREDITS: 184 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN072IU Reading & Writing
IE1 11 EN074IU
Reading &
writing IE2 8
EN073IU Listening & Speaking
IE1 11 EN075IU
Listening &
speaking IE2 8
PT001IU Physical Training 1 3 PT002IU Physical
Training 2 3
IS001IU
Introduction to
Industrial
Engineering
1
MA001IU Calculus 1 4
Total Credits 25 Total Credits 24
Summer Semester Crds
PE011IU Principles of Marxism 5
Total Credits 5
School of Industrial Engineering and Management
56 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 CH012IU
Chemistry
Laboratory 1
EN007IU Writing AE1 2 CH011IU Chemistry for
Engineers 3
EN008IU Listening AE1 2 IS081IU Deterministic
models in OR 4
IS004IU
Engineering
Probability &
Statistics
4 EN012IU Speaking AE2 2
PE008IU Critical Thinking 3 EN011IU Writing AE2 2
PH013IU Physics 1 2 IS054IU Engineering
Drawing 3
PH014IU Physics 2 2 MA023IU Calculus 3 4
MA003IU Calculus 2 4
Total Credits 21 Total Credits 19
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
57 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PH015IU Physics 3 3 IS086IU Introduction to
Computing 3
IS084IU Environmental
Science 3 IS020IU
Engineering
Economy 3
IS019IU Production
Management 3 IS017IU
Work design &
Ergonomics +
Lab
4
IS040IU Management
Information System 3 IS034IU
Product Design
& Development 3
IS025IU Quality Management 3 IS041IU Lean Production 3
IS016IU
Engineering
Mechanics –
Dynamics
3 PE013IU
Revolutionary
Lines of
Vietnamese
Communist
Party
3
PE012IU HCM’ s thoughts 2 IS085IU CAD/CAM/
CNC 3
IS___IU
ISE Elective Course
(choose 1 course
below)
3
IS031IU Experimental Design 3
IS087IU Manufacturing
Processes 3
School of Industrial Engineering and Management
58 | P a g e
IS058IU Time series &
forecasting technique 3
Total Credits 23 Total Credits 22
Summer Semester Crds
IS053IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
59 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS028IU Simulation
Models in IE 4
IS033IU Multi-Criteria
Decision Making 3 IS027IU
Scheduling &
Sequencing 3
IS026IU Project Management 3 IS032IU Facility Layout 3
IS024IU Probabilistic Models
in OR 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
IS___IU
ISE Elective Course
(choose 3 courses
below)
9 IS079IU Scientific
Writing 2
IS080IU Creative Thinking 3
IS035IU Systems Engineering 3
IS043IU
Flexible
Manufacturing
Systems
3
IS045IU Leadership 3
IS023IU Inventory
Management 3
IS082IU Retail Management 3
IS067IU
International
Transportation &
Logistics
3
School of Industrial Engineering and Management
60 | P a g e
IS062IU E-Logistics in Supply
Chain Management 3
Total Credits 21 Total Credits 15
Senior Year (Year 5)
Semester 9 Crds
IS048IU Thesis research 10
Total Credits 10
School of Industrial Engineering and Management
61 | P a g e
LOGISTICS & SCM
PROGRAM
School of Industrial Engineering and Management
62 | P a g e
6. LOGISTICS & SCM PROGRAM (for batch 2016, 2017, 2018)
6.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 143 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007IU Writing AE1 2 EN011IU Writing AE2 2
EN008IU Listening AE1 2 EN012IU Speaking AE2 2
MA001IU Calculus 1 4 MA003IU Calculus 2 4
PH013IU Physics 1 2 PE008IU Critical Thinking 3
PH014IU Physics 2 2 PT002IU Physical Training 2 3
PT001IU Physical Training
1 3 IS056IU
Introduction to
Logistics & Supply
Chain Management
1
CH011IU Chemistry for
Engineers 3 IS054IU
Engineering
Drawing 3
PH015IU Physics 3 3
Total Credits 18 Total Credits 21
School of Industrial Engineering and Management
63 | P a g e
Summer Semester Crds
PE011IU Principles of
Marxism 5
PE012IU HCM’ s thoughts 2
PE013IU
Revolutionary
Lines of
Vietnamese
Communist Party
3
Total Credits 10
School of Industrial Engineering and Management
64 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
IS019IU Production
Management 3 IS077IU
Introduction to
Programming –
C++/C#, Python
2
IS076IU
Introduction to
Computing –
MatLab
Application
3 IS020IU Engineering
Economy 3
MA027IU Applied Linear
Algebra 2 IS081IU
Deterministic
models in OR 4
IS004IU
Engineering
Probability &
Statistics
4 IS057IU
Warehouse
Engineering
Management
3
IS055IU
Principles of
Logistics and
Supply Chain
Management
3 BA003IU Principles of
Marketing 3
IS073IU Business Law 3
Total Credits 18 Total Credits 18
School of Industrial Engineering and Management
65 | P a g e
Summer Semester Crds
IS069IU Internship 1 2
Military Training 0
Total Credits 2
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
IS061IU
Information
Systems in
Supply Chain
3 IS079IU Scientific Writing 2
IS023IU Inventory
Management 3 IS028IU
Simulation Models
In IE 4
IS059IU
Materials
Handling
Systems
3 IS027IU Scheduling &
Sequencing 3
IS082IU Retail
Management 3 IS078IU
Logistics
Engineering &
Supply Chain
Design
3
BA184IU Financial
Accounting 4 IS068IU
Procurement
Management 3
School of Industrial Engineering and Management
66 | P a g e
IS___IU
LSCM Elective
Course (choose 1
course below)
3
IS058IU
Time series &
forecasting
techniques
3
IS024IU Probabilistic
Models in OR 3
IS035IU Systems
Engineering 3
Total Credits 18 Total Credits 15
Summer Semester Crds
IS070IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
67 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS033IU Multi-Criteria
Decision Making 3 IS048IU Thesis research 10
IS067IU
International
Transportation &
Logistics
3
IS026IU Project
Management 3
IS___IU
LSCM Elective
Course (choose 2
courses below)
6
IS025IU Quality
Management 3
IS062IU
E-Logistics in
Supply Chain
Management
3
IS063IU Sustainability in
Supply Chain 3
IS064IU Entrepreneurship
in Supply Chain 3
School of Industrial Engineering and Management
68 | P a g e
IS065IU
Supply Security
and Risk
Management
3
IS066IU Data Mining In
Supply Chain 3
IS072IU Port Planning and
Operations 3
BA130IU Organizational
Behavior 3
BA032IU Sales
Management 3
IS045IU Leadership 3
IS080IU Creative
Thinking 3
BA156IU
Human
Resources
Management
3
Total Credits 15 Total Credits 10
School of Industrial Engineering and Management
69 | P a g e
6.2 English Level 1: 430 ≤ TOEFL < 500
TOTAL CREDITS: 159 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN074IU Reading & writing
IE2 8 EN007IU Writing AE1 2
EN075IU Listening &
speaking IE2 8 EN008IU Listening AE1 2
PT001IU Physical Training
1 3 CH011IU
Chemistry for
Engineers 3
MA001IU Calculus 1 4 PH014IU Physics 2 2
PH013IU Physics 1 2 PT002IU Physical Training 2 3
IS056IU
Introduction to
Logistics & Supply
Chain Management
1
IS054IU Engineering
Drawing 3
MA003IU Calculus 2 4
Total Credits 25 Total Credits 20
School of Industrial Engineering and Management
70 | P a g e
Summer Semester Crds
PE011IU Principles of
Marxism 5
PE012IU HCM’ s thoughts 2
PE013IU
Revolutionary
Lines of
Vietnamese
Communist Party
3
Total Credits 10
School of Industrial Engineering and Management
71 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
EN011IU Writing AE2 2 IS077IU
Introduction to
Programming –
C++/C#, Python
2
EN012IU Speaking AE2 2 IS020IU Engineering
Economy 3
IS019IU Production
Management 3 IS081IU
Deterministic
models in OR 4
IS004IU
Engineering
Probability &
Statistics
4 BA003IU Principles of
Marketing 3
PE008IU Critical Thinking 3 IS057IU
Warehouse
Engineering
Management
3
IS055IU
Principles
Logistics and
Supply Chain
Management
3 PH015IU Physics 3 3
IS076IU
Introduction to
Computing –
MatLab
Application
3
MA027IU Applied Linear
Algebra 2
Total Credits 22 Total Credits 18
School of Industrial Engineering and Management
72 | P a g e
Summer Semester Crds
IS069IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
73 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
BA184IU Financial
Accounting 4 IS068IU
Procurement
Management 3
IS061IU
Management
Information
Systems in Supply
Chain
3 IS079IU Scientific Writing 2
IS023IU Inventory
Management 3 IS078IU
Logistic
engineering &
supply chain design
3
IS059IU Materials Handling
Systems 3 IS028IU
Simulation Models
in IE 4
IS082IU Retail
Management 3 IS074IU
Import – Export
Management 3
IS073IU Business Law 3 IS027IU Scheduling &
Sequencing 3
IS___IU
LSCM Elective
Course (choose 1
course below)
3
IS058IU
Time series &
forecasting
techniques
3
IS024IU Probabilistic
Models in OR 3
School of Industrial Engineering and Management
74 | P a g e
IS035IU Systems
Engineering 3
Total Credits 22 Total Credits 18
Summer Semester Crds
IS070IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
75 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS033IU Multi-Criteria
Decision Making 3 IS048IU Thesis research 10
IS067IU
International
Transportation &
Logistics
3
IS026IU Project
Management 3
IS___IU
LSCM Elective
Course (choose 2
courses below)
6
IS025IU Quality
Management 3
IS062IU
E-Logistics in
Supply Chain
Management
3
IS063IU Sustainability in
Supply Chain 3
IS064IU Entrepreneurship
In Supply Chain 3
IS065IU
Supply Security
And Risk
Management
3
IS066IU Data Mining In
Supply Chain 3
School of Industrial Engineering and Management
76 | P a g e
IS072IU Port Planning and
Operations 3
BA130IU Organizational
Behavior 3
BA032IU Sales Management 3
IS045IU Leadership 3
IS080IU Creative Thinking 3
BA156IU Human Resources
Management 3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
77 | P a g e
6.3 English Level 3: TOEFL < 430
TOTAL CREDITS: 181 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN072IU Reading & writing
IE1 11 EN074IU
Reading & writing
IE2 8
EN073IU Listening &
speaking IE1 11 EN075IU
Listening &
speaking IE2 8
PT001IU Physical Training 1 3 MA001IU Calculus 1 4
PT002IU Physical Training 2 3
IS056IU
Introduction to
Logistics & Supply
Chain Management
1
Total Credits 25 Total Credits 24
Summer Semester Crds
PE011IU Principles of
Marxism 5
PE012IU HCM’ s thoughts 2
PE013IU
Revolutionary
Lines of
Vietnamese
Communist Party
3
Total Credits 10
School of Industrial Engineering and Management
78 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 CH011IU
Chemistry for
Engineers 3
EN007IU Writing AE1 2 IS081IU Deterministic
models in OR 4
EN008IU Listening AE1 2 EN011IU Writing AE2 2
IS004IU
Engineering
Probability &
Statistics
4 EN012IU Speaking AE2 2
PH013IU Physics 1 2 PE008IU Critical Thinking 3
PH014IU Physics 2 2 IS054IU Engineering
Drawing 3
MA003IU Calculus 2 4 PH015IU Physics 3 3
Total Credits 18 Total Credits 20
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
79 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
IS019IU Production
Management 3 IS020IU
Engineering
Economy 3
IS076IU
Introduction to
Computing –
MatLab
Application
3 IS057IU
Warehouse
Engineering
Management
3
IS055IU
Principles Logistics
and Supply Chain
Management
3 BA184IU Financial
Accounting 4
IS073IU Business Law 3 BA003IU Principles of
Marketing 3
IS061IU
Management
Information
Systems in Supply
Chain
3 IS074IU Import – Export
Management 3
IS023IU Inventory
Management 3 IS077IU
Introduction to
Programming –
C++/C#, Python
2
IS___IU
LSCM Elective
Course (choose 1
course below)
3
IS058IU
Time series &
forecasting
techniques
3
School of Industrial Engineering and Management
80 | P a g e
IS024IU Probabilistic
Models in OR 3
IS035IU Systems
Engineering
Total Credits 21 Total Credits 18
School of Industrial Engineering and Management
81 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS082IU Retail Management 3 IS028IU Simulation Models
in IE 4
IS059IU Materials Handling
Systems 3 IS027IU
Scheduling &
Sequencing 3
IS033IU Multi-Criteria
Decision Making 3 IS078IU
Logistic
engineering &
supply chain design
3
IS067IU
International
Transportation &
Logistics
3 IS068IU Procurement
Management 3
IS026IU Project
Management 3 IS079IU Scientific Writing 2
IS___IU
LSCM Elective
Course (choose 2
courses below)
6
IS025IU Quality
Management 3
IS062IU
E-Logistics in
Supply Chain
Management
3
IS063IU Sustainability in
Supply Chain 3
IS064IU Entrepreneurship in
Supply Chain 3
School of Industrial Engineering and Management
82 | P a g e
IS065IU
Supply Security
And Risk
Management
3
IS066IU Data Mining in
Supply Chain 3
IS072IU Port Planning and
Operations 3
BA130IU Organizational
Behavior 3
BA032IU Sales Management 3
IS045IU Leadership 3
IS080IU Creative Thinking 3
BA156IU Human Resources
Management 3
Total Credits 21 Total Credits 15
Summer semester Crds
IS047IU Internship 2 3
Total Credits 3
Senior Year (Year 5)
Semester 9 Crds
IS048IU Thesis research 10
Total Credits 10
School of Industrial Engineering and Management
83 | P a g e
7. LOGISTICS & SCM PROGRAM (for batch 2019 and forwards)
7.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 146 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007IU Writing AE1 2 EN011IU Writing AE2 2
EN008IU Listening AE1 2 EN012IU Speaking AE2 2
MA001IU Calculus 1 4 MA003IU Calculus 2 4
PH013IU Physics 1 2 PE008IU Critical Thinking 3
PH014IU Physics 2 2 PT002IU Physical Training 2 3
PT001IU Physical Training 1 3 IS056IU
Introduction to
Logistics & Supply
Chain Management
1
CH012IU Chemistry
Laboratory 1 PH015IU Physics 3 3
CH011IU Chemistry for
Engineers 3
Total Credits 19 Total Credits 18
School of Industrial Engineering and Management
84 | P a g e
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
School of Industrial Engineering and Management
85 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
IS019IU Production
Management 3 IS020IU
Engineering
Economy 3
IS086IU Introduction to
Computing 3 IS081IU
Deterministic
models in OR 4
MA027IU Applied Linear
Algebra 2 IS057IU
Warehouse
Engineering
Management
3
IS004IU
Engineering
Probability &
Statistics
4 MA023IU Calculus 3 4
IS055IU
Principles of
Logistics and
Supply Chain
Management
3 IS074IU Import – Export
Management 3
PE012IU HCM’ s thoughts 2 PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
IS073IU Business Law 3
Total Credits 20 Total Credits 20
School of Industrial Engineering and Management
86 | P a g e
Summer Semester Crds
IS069IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
87 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PE014IU Environmental
Science 3 IS079IU Scientific Writing 2
IS040IU
Management
Information
Systems
3 IS027IU Scheduling &
Sequencing 3
IS023IU Inventory
Management 3 IS028IU
Simulation Models
in IE 4
IS059IU Materials Handling
Systems 3 IS078IU
Logistic engineering
& supply chain
design
3
IS082IU Retail Management 3 BA184IU Financial
Accounting 4
IS___IU
LSCM Elective
Course (choose 1
course below)
3 IS068IU Procurement
Management 3
IS058IU
Time series &
forecasting
techniques
3
IS054IU Engineering
Drawing 3
School of Industrial Engineering and Management
88 | P a g e
IS024IU Probabilistic
Models in OR 3
IS035IU Systems
Engineering 3
Total Credits 18 Total Credits 19
Summer Semester Crds
IS070IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
89 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS033IU Multi-Criteria
Decision Making 3 IS048IU Thesis research 10
IS083IU Capstone Design 3
IS067IU
International
Transportation &
Logistics
3
IS026IU Project
Management 3
IS___IU
LSCM Elective
Course (choose 2
courses below)
6
IS025IU Quality
Management 3
IS062IU
E-Logistics in
Supply Chain
Management
3
IS063IU Sustainability in
Supply Chain 3
IS064IU Entrepreneurship In
Supply Chain 3
School of Industrial Engineering and Management
90 | P a g e
IS065IU
Supply Security
And Risk
Management
3
IS066IU Data Mining In
Supply Chain 3
IS072IU Port Planning and
Operations 3
IS080IU Creative Thinking 3
BA130IU Organizational
Behavior 3
BA032IU Sales Management 3
IS045IU Leadership 3
BA156IU Human Resource
Management 3
BA003IU Principles of
Marketing 3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
91 | P a g e
7.2 English Level 1: 430 ≤ TOEFL < 500
TOTAL CREDITS: 162 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN074IU Reading &
writing IE2 8 EN007IU Writing AE1 2
EN075IU Listening &
speaking IE2 8 EN008IU Listening AE1 2
PT001IU Physical Training
1 3 CH012IU
Chemistry
Laboratory 1
MA001IU Calculus 1 4 CH011IU Chemistry for
Engineers 3
PH014IU Physics 2 2
PT002IU Physical Training 2 3
IS056IU
Introduction to
Logistics & Supply
Chain Management
1
PH013IU Physics 1 2
MA003IU Calculus 2 4
Total Credits 23 Total Credits 20
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
School of Industrial Engineering and Management
92 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
EN011IU Writing AE2 2 IS020IU Engineering
Economy 3
EN012IU Speaking AE2 2 IS081IU Deterministic
models in OR 4
IS019IU Production
Management 3 IS057IU
Warehouse
Engineering
Management
3
IS004IU
Engineering
Probability &
Statistics
4 PH015IU Physics 3 3
PE008IU Critical Thinking 3 MA023IU Calculus 3 4
IS055IU
Principles
Logistics and
Supply Chain
Management
3 IS073IU Business Law 3
IS086IU Introduction to
Computing 3
MA027IU Applied Linear
Algebra 2
Total Credits 22 Total Credits 20
Summer Semester Crds
IS069IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
93 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
PE014IU Environmental
Science 3 IS068IU
Procurement
Management 3
BA184IU Financial
Accounting 4 IS079IU Scientific Writing 2
IS040IU
Management
Information
systems
3 IS078IU
Logistic engineering
& supply chain
design
3
IS023IU Inventory
Management 3 IS028IU
Simulation Models
in IE 4
IS059IU Materials
Handling Systems 3 IS074IU
Import – Export
Management 3
IS082IU Retail
Management 3 IS027IU
Scheduling &
Sequencing 3
PE012IU HCM’ s thoughts 2 PE013IU
Revolutionary Lines
of Vietnamese
Communist Party
3
IS___IU
LSCM Elective
Course (choose 1
course below)
3
IS058IU
Time series &
forecasting
techniques
3
IS054IU Engineering
Drawing 3
School of Industrial Engineering and Management
94 | P a g e
IS024IU Probabilistic
Models in OR 3
IS035IU Systems
Engineering 3
Total Credits 24 Total Credits 21
Summer Semester Crds
IS070IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
95 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
IS083IU Capstone Design 3 IS048IU Thesis research 10
IS033IU Multi-Criteria
Decision Making 3
IS067IU
International
Transportation &
Logistics
3
IS026IU Project
Management 3
IS___IU
LSCM Elective
Course (choose 2
courses below)
6
IS025IU Quality
Management 3
IS062IU
E-Logistics in
Supply Chain
Management
3
IS063IU Sustainability in
Supply Chain 3
IS064IU Entrepreneurship
In Supply Chain 3
IS065IU
Supply Security
And Risk
Management
3
School of Industrial Engineering and Management
96 | P a g e
IS066IU Data Mining In
Supply Chain 3
IS072IU Port Planning and
Operations 3
BA130IU Organizational
Behavior 3
BA032IU Sales
Management 3
IS045IU Leadership 3
IS080IU Creative Thinking 3
BA003IU Principles Of
Marketing 3
BA156IU Human Resources
Management 3
Total Credits 18 Total Credits 10
School of Industrial Engineering and Management
97 | P a g e
7.3 English Level 3: TOEFL < 430
TOTAL CREDITS: 184 (Note: Credits of Physical Training 1 and Physical
Training 2 are not included in cumulative credits)
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN072IU Reading & writing
IE1 11 EN074IU
Reading & writing
IE2 8
EN073IU Listening &
speaking IE1 11 EN075IU
Listening &
speaking IE2 8
PT001IU Physical Training 1 3 MA001IU Calculus 1 4
PT002IU Physical Training 2 3
IS056IU
Introduction to
Logistics & Supply
Chain Management
1
Total Credits 25 Total Credits 24
Summer Semester Crds
PE011IU Principles of
Marxism 5
Total Credits 5
School of Industrial Engineering and Management
98 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA027IU Applied Linear
Algebra 2 MA023IU Calculus 3 4
EN007IU Writing AE1 2 CH012IU Chemistry
Laboratory 1
EN008IU Listening AE1 2 CH011IU Chemistry for
Engineers 3
IS004IU
Engineering
Probability &
Statistics
4 IS081IU Deterministic
models in OR 4
PH013IU Physics 1 2 EN011IU Writing AE2 2
PH014IU Physics 2 2 EN012IU Speaking AE2 2
MA003IU Calculus 2 4 PE008IU Critical Thinking 3
PH015IU Physics 3 3
Total Credits 18 Total Credits 22
Summer Semester Crds
IS052IU Internship 1 2
Military Training 0
Total Credits 2
School of Industrial Engineering and Management
99 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
IS019IU Production
Management 3 IS082IU Retail Management 3
IS086IU Introduction to
Computing 3 IS020IU
Engineering
Economy 3
IS055IU
Principles Logistics
and Supply Chain
Management
3 IS057IU
Warehouse
Engineering
Management
3
IS073IU Business Law 3 BA184IU Financial
Accounting 4
IS040IU
Management
Information
Systems
3 PE013IU
Revolutionary
Lines of
Vietnamese
Communist Party
3
IS023IU Inventory
Management 3 IS074IU
Import – Export
Management 3
PE012IU HCM’ s thoughts 2
IS___IU
LSCM Elective
Course (choose 1
course below)
3
IS058IU
Time series &
forecasting
techniques
3
IS024IU Probabilistic
Models in OR 3
School of Industrial Engineering and Management
100 | P a g e
IS054IU Engineering
Drawing 3
IS035IU Systems
Engineering 3
Total Credits 23 Total Credits 19
Summer semester Crds
IS047IU Internship 2 3
Total Credits 3
School of Industrial Engineering and Management
101 | P a g e
Senior Year (Year 4)
Semester 7 Crds Semester 8 Crds
PE014IU Environmental
Science 3 IS083IU Capstone Design 3
IS059IU Materials Handling
Systems 3 IS028IU
Simulation Models
in IE 4
IS033IU Multi-Criteria
Decision Making 3 IS027IU
Scheduling &
Sequencing 3
IS067IU
International
Transportation &
Logistics
3 IS078IU
Logistic
engineering &
supply chain design
3
IS026IU Project
Management 3 IS068IU
Procurement
Management 3
IS___IU
LSCM Elective
Course (choose 2
courses below)
6 IS079IU Scientific Writing 2
IS025IU Quality
Management 3
BA032IU Sales Management 3
IS062IU
E-Logistics in
Supply Chain
Management
3
IS063IU Sustainability in
Supply Chain 3
IS064IU Entrepreneurship
In Supply Chain 3
School of Industrial Engineering and Management
102 | P a g e
IS065IU
Supply Security
And Risk
Management
3
IS066IU Data Mining In
Supply Chain 3
IS072IU Port Planning and
Operations 3
BA130IU Organizational
Behavior 3
IS045IU Leadership 3
IS080IU Creative Thinking 3
BA003IU Principles Of
Marketing 3
BA156IU Human Resources
Management 3
Total Credits 21 Total Credits 18
Senior Year (Year 5)
Semester 9 Crds
IS048IU Thesis research 10
Total Credits 10
School of Industrial Engineering and Management
103 | P a g e
TWINNING
PROGRAM
(Curricula for the first two years in IU)
School of Industrial Engineering and Management
104 | P a g e
8. IU-RG (Rutgers University) PROGRAM (For batch 2014 and forwards)
8.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 74
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007RG Writing AE1 2 EN011RG Writing AE2 2
EN008RG Listening AE1 2 EN012RG Speaking AE2 2
MA001RG Calculus 1 4 MA003RG Calculus 2 4
PH013RG Physics 1 2 PE008RG Critical Thinking 3
PH014RG Physics 2 2 CH008RG Analytical chemistry 3
CH011RG Chemistry for
Engineers 3 IS001RG
Introduction to
Industrial
Engineering
1
CH012RG Chemistry
Laboratory 1 IS002RG
Introduction to
Computing 3
IS005RG Engineering
Mechanics - Statics 3
Total Credits 16 Total Credits 21
School of Industrial Engineering and Management
105 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA023RG Calculus 3 4 MA024RG Differential
Equations 4
PH015RG Physics 3 3 IS014RG Analytical Physics
IIB 3
PH016RG Physics 3 Lab 1 IS015RG Analytical Physics
IIB Lab 1
IS006RG IE Lab 2 IS016RG
Engineering
Mechanics -
Dynamics
3
IS004RG Engineering
Probability 3 IS017RG
Work design &
Ergonomics + Lab 4
IS013RG Mechanics of
Solids 3 IS003RG
Introduction to
Microeconomic 3
IS012RG Introduction to
Macroeconomics 3
Total Credits 16 Total Credits 21
School of Industrial Engineering and Management
106 | P a g e
8.2 English Level 1: 430 ≤ TOEFL < 500
TOTAL CREDITS: 90
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN075RG Listening &
Speaking IE2 8 CH011RG
Chemistry for
Engineers 3
EN074RG Reading & Writing
IE2 8 CH012RG
Chemistry
Laboratory 1
MA001RG Calculus 1 4 MA003RG Calculus 2 4
PH013RG Physics 1 2 IS005RG Engineering
Mechanics – Statics 3
PH014RG Physics 2 2 PE008RG Critical thinking 3
EN007RG Writing AE1 2
EN008RG Listening AE1 2
IS001RG
Introduction to
Industrial
Engineering
1
Total Credits 24 Total Credits 19
Summer Semester Crds
EN011RG Writing AE2 2
EN012RG Listening AE2 2
Total Credits 4
School of Industrial Engineering and Management
107 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA023RG Calculus 3 4 MA024RG Differential
Equations 4
PH015RG Physics 3 3 IS014RG Analytical Physics
IIB 3
PH016RG Physics 3 Lab 1 IS015RG Analytical Physics
IIB Lab 1
IS006RG IE lab 2 IS016RG
Engineering
Mechanics –
Dynamics
3
IS004RG Engineering
Probability 3 IS003RG
Introduction to
Microeconomic 3
IS013RG Mechanics of
Solids 3 IS012RG
Introduction to
Macro economics 3
CH008RG Analytical
chemistry 3 IS017RG
Work design &
Ergonomics + Lab 4
IS002RG Introduction to
Computing 3
Total Credits 19 Total Credits 24
School of Industrial Engineering and Management
108 | P a g e
8.3 English Level 1: TOEFL < 430
TOTAL CREDITS: 112
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN072RG Reading & writing
IE1 11 EN075RG
Listening & Speaking
IE2 8
EN073RG Listening &
speaking IE1 11 EN074RG
Reading & Writing
IE2 8
PH013RG Physics 1 2
PH014RG Physics 2 2
MA001RG Calculus 1 4
IS001RG Introduction to IE 1
Total Credits 22 Total Credits 25
Summer Semester Crds
EN007RG Writing AE1 2
EN008RG Listening AE1 2
MA003RG Calculus 2 4
Total Credits 8
School of Industrial Engineering and Management
109 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
CH011RG Chemistry for
Engineers 3
CH008RG Analytical chemistry 4
CH012RG Chemistry
Laboratory 1 IS005RG
Engineering
Mechanics – Statics 3
IS006RG IE lab 2 IS002RG Introduction to
Computing 3
IS004RG Engineering
Probability 3 IS017RG
Work design &
Ergonomics + Lab 4
MA023RG Calculus 3 (Multi-
variable Calculus) 4 IS013RG Mechanics of Solids 3
EN011RG Writing AE2 2 IS003RG Introduction to
Microeconomic 3
EN012RG Speaking AE2 2 IS012RG Introduction to
Macro economics 3
Total Credits 17 Total Credits 23
School of Industrial Engineering and Management
110 | P a g e
Junior Year (Year 3)
Semester 5 Crds
MA024RG Differential
Equations 4
PH015RG Physics 3 3
PH016RG Physics 3 Lab 1
IS016RG
Engineering
Mechanics –
Dynamics
3
IS014RG Analytical Physics
IIB 3
IS015RG Analytical Physics
IIB Lab 1
PE008RG Critical thinking 3
Total Credits 18
School of Industrial Engineering and Management
111 | P a g e
9. IU-SB PROGRAM (The State University of New York, University at
Binghamton) (For batch 2017 and forwards)
9.1 English Level 1: TOEFL ≥ 500
TOTAL CREDITS: 54
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN007SB Writing AE1 2 EN011SB Writing AE2 2
EN008SB Listening AE1 2 EN012SB Speaking AE2 2
MA001SB Calculus 1 4 MA003SB Calculus 2 4
PH013SB Physics 1 2 PH014SB Physics 2 2
CH011SB Chemistry for
Engineers 3 PT002SB Physical Training 2 0
CH012SB Chemistry
Laboratory 1 IS001SB
Introduction to
Industrial
Engineering
1
PT001SB Physical Training 1 0
Total Credits 14 Total Credits 11
School of Industrial Engineering and Management
112 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
MA024SB
or
MA023SB
Differential
Equations or Cal 3 4 IS017SB Human Factors 4
PH015SB Physics 3 3 IS077SB
Introduction to
Programming –
C++/C#, Python
2
PH016SB Physics 3 Lab 1 IS005SB Engineering
Mechanics - Statics 3
PE008SB Critical Thinking 3 IS020SB Engineering
Economy 3
IS004SB Engineering
Probability 4 PH012SB Physics 4 2
Total Credits 15 Total Credits 14
School of Industrial Engineering and Management
113 | P a g e
9.2 English Level 1: 430 ≤ TOEFL < 500
TOTAL CREDITS: 70
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN075SB Listening &
Speaking IE2 8 EN007SB Writing AE1 2
EN074SB Reading & Writing
IE2 8 EN008SB Listening AE1 2
PT001SB Physical Training 1 0 MA001SB Calculus 1 4
PH013SB Physics 1 2
PT002SB Physical Training 2 0
IS001SB
Introduction to
Industrial
Engineering
1
Total Credits 16 Total Credits 11
School of Industrial Engineering and Management
114 | P a g e
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
EN011SB Writing AE2 2 PH015SB Physics 3 3
EN012SB Listening AE2 2 PH016SB Physics 3 Lab 1
MA003SB Calculus 2 4 IS005SB Engineering
Mechanics – Statics 3
PH014SB Physics 2 2 IS077SB
Introduction to
Programming –
C++/C#, Python
2
IS004SB Engineering
Probability 4 IS017SB Human Factors 4
IS020SB
Engineering
Economy 3
Total Credits 14 Total Credits 16
School of Industrial Engineering and Management
115 | P a g e
Junior Year (Year 3)
Semester 5 Crds
MA024SB
or
MA023SB
Differential
Equations or Cal 3 4
CH011SB Chemistry for
Engineers 3
CH012SB Chemistry
Laboratory 1
PE008SB Critical thinking 3
PH012SB Physics 4 2
Total Credits 13
School of Industrial Engineering and Management
116 | P a g e
9.3 English Level 1: TOEFL < 430
TOTAL CREDITS: 92
Freshman Year (Year 1)
Semester 1 Crds Semester 2 Crds
EN073SB Listening &
Speaking IE1 11 EN075SB
Listening &
Speaking IE2 8
EN072SB Reading & Writing
IE1 11 EN074SB
Reading & Writing
IE2 8
PT001SB Physical Training 1 0 PT002SB Physical training 2 0
IS001SB Introduction to IE 1
Total Credits 22 Total Credits 17
Sophomore Year (Year 2)
Semester 3 Crds Semester 4 Crds
EN007SB Writing AE1 2 EN011SB Writing AE2 2
EN008SB Listening AE1 2 EN012SB Listening AE2 2
MA001SB Calculus 1 4 MA003SB Calculus 2 4
PH013SB Physics 1 2 PH014SB Physics 2 2
IS004SB Engineering
Probability 4 IS005SB
Engineering
Mechanics – Statics 3
IS017SB Human Factors 4
Total Credits 14 Total Credits 17
School of Industrial Engineering and Management
117 | P a g e
Junior Year (Year 3)
Semester 5 Crds Semester 6 Crds
MA024SB
or
MA023SB
Differential
Equations or Cal 3 4 CH011SB
Chemistry for
Engineers 3
PE008SB Critical thinking 3 CH012SB Chemistry
Laboratory 1
PH015SB Physics 3 3 IS077SB
Introduction to
Programming –
C++/C#, Python
2
PH016SB Physics 3 Lab 1 IS020SB Engineering
Economy 3
PH012SB Physics 4 2
Total Credits 11 Total Credits 11
**Subject to change. The RG ISE and SB ISE curricula for students whose TOEFL
scores below 500 provided here are just examples based on their English levels at
the year of intake. The subjects to be taken are usually fixed in the freshmen year but
might be varied in the years following, depending on their progress in English
which is frequently assessed by every semester. The students will be counseled by
their appointed advisors on the subjects to be taken in the new semester.
School of Industrial Engineering and Management
118 | P a g e
10. COURSE DESCRIPTION
EN007IU Writing Academic English 1 2 credits
This course provides students with instruction and practice in essay writing,
including transforming ideas into different functions of writing such as definitions,
classifications, cause – effects, arguments. Through reading a few representative
university-level texts, students will develop the ability to read critically and write
accurately, coherently, and in appropriate academic style in response to those texts.
They will also practice necessary skills to write a research report.
EN008IU Listening Academic English 1 2 credits
To provide students with the study skills needed to listen to academic lectures, take
effective notes and prepare for examinations.
EN011IU Writing Academic English 2 2 credits
This course provides an overview of the organizational format for a research paper
and assists students in completing research projects in any content area course by
providing assistance in writing effective research papers using a step-by-step process
approach. Course content includes the components of a research paper, and
techniques of selecting and narrowing topics; writing argumentative thesis
statements; outlining; locating and documenting sources; taking notes. Students also
have to read extensively about a chosen topic to explore different ideas of multiple
authors about that topic. Students work with projects relating to their content area
courses.
Prerequisite: EN007 & EN008 (Academic English 1)
School of Industrial Engineering and Management
119 | P a g e
EN012IU Speaking Academic English 2 2 credits
Students are provided with practical strategies for effective presentations. They also
have chance to practice giving presentations in class and receive feedback.
Prerequisite: EN007 & EN008 (Academic English 1)
PE011IU Principles of Marxism 5 credits
The first chapter will give a general introduction about the Marxism and the content
of the course. The remaining part of the course will be divided into three sections:
Section 1 includes the basic concepts of the worldview and methodology of
Marxism; Section 2 covers the economic theory of Marxism on the capitalist modes
of production; Section 3 includes basic reasoning of Marxism on the socialism and
the prospects of real socialism.
PE012IU HCM’ s Thoughts 2 credits
The course includes 7 chapters: Chapter 1 presents the basis and the development
process of Ho Chi Minh’s thoughts; the remaining chapters cover the basic contents
of Ho Chi Minh’s thoughts according to the course objectives.
PE013IU Revolutionary Lines of Vietnamese Communist
Party
3 credits
The course will provide students with the basic knowledge of the revolutionary
lines of the Party, especially in the innovative periods.
MA001IU Calculus 1 4 credits
Functions; Limits; Continuity; Derivatives, Differentiation, Derivatives of Basic
Elementary Functions, Differentiation Rules; Applications of Differentiation:
L’Hôpital’s Rule, Optimization, Newton’s Method; Anti-derivatives; Indefinite
Integrals, Definite Integrals, Fundamental Theorem of Calculus; Techniques of
School of Industrial Engineering and Management
120 | P a g e
Integration; Improper Integrals; Applications of Integration.
MA003IU Calculus 2 4 credits
Sequence and Series; Convergence Tests; Power Series; Taylor and Maclaurin
Series; Cartesian Coordinates; Lines, Planes and Surfaces; Derivatives and Integrals
of Vector Functions, Arc Length and Curvature, Parametric Surfaces; Functions of
Several Variables; Limits, Continuity, Partial Derivatives, Tangent Planes; Gradient
Vectors; Extrema; Lagrange Multipliers; Multiple Integrals: Double Integrals, Triple
Integrals, Techniques of Integration; Vector Fields, Line Integrals, Surface Integrals.
Prerequisite: MA001 (Calculus 1)
MA023IU Calculus 3 4 credits
Complex numbers, complex series, complex functions, complex derivatives;
Laplace transform, z-transform, Fourier series, Fourier transform, the inverse
transform, transforms of derivatives and integrals, first-order differential equations,
second-order differential equations, difference equations, applications to electrical
circuits and signal processing.
Prerequisite: MA003 (Calculus 2)
MA024IU Differential Equations 2 credits
First-order differential equations, second-order linear differential equations,
undetermined coefficients, variation of parameters, applications, higher-order linear
differential equations, systems of first-order linear equations, elementary partial
differential equations and the method of separation of variables.
Prerequisite: MA003 (Calculus 2)
School of Industrial Engineering and Management
121 | P a g e
MA027IU Applied Linear Algebra 2 credits
The course provides the student with basic knowledge in linear algebra with
applications, in particular the skill of solving linear systems of equations using
Gauss elimination method.
Prerequisite: None
PH013IU Physics 1 2 credits
An introduction to mechanics including: planar forces, free body diagrams, planar
equilibrium of rigid bodies, friction, distributed forces, shear force and bending
moment diagrams, simple stress and strain and associated material properties,
kinematics and kinetic of particles, work and energy, motion of rigid bodies in a
plane.
PH014IU Physics 2 2 credits
This course provides students basic knowledge about fluid mechanics; macroscopic
description of gases; heat and the first law of thermodynamics; heat engines and the
second law of thermodynamics; microscopic description of gases and the kinetic
theory of gases.
PH015IU Physics 3 3 credits
To provide a thorough introduction to the basic principles of physics to physics and
engineering students in order to prepare them for further study in physics and to
support their understanding and design of practical applications in their fields.
Content: Electrostatics, particles in electric and magnetic fields, electromagnetism,
circuits, Maxwell's equations, electromagnetic radiation.
Co-requisite: PH016 (Physic 3 Laboratory)
PH016IU Physics 3 Lab 1 credit
School of Industrial Engineering and Management
122 | P a g e
Physics 3 Lab is an experimental course on electricity and magnetism given to
undergraduate students who attended Physics 3 (Electricity and Magnetism). Each
student will do eight different experiments in a small group, and then write a lab
report based on the experimental results.
PH012IU Physics 4 2 credits
• Know and understand basic physical processes and phenomena.
• Solve basic physics problem by applying both theoretical and experimental
techniques.
• Understand and acquire skills needed to use physical laws governing real
process and to solve them in the engineering environment.
CH011IU Chemistry for Engineers 3 credits
This course is designed for non-chemistry majors, as it is intended for students
pursuing a degree in information technology, electronic and telecommunication. The
course is designed to provide a strong background in the fundamentals of chemistry,
preparing students for further study in their major field. Topics include important
principles, theories, concepts of chemistry, and chemical calculations necessary for a
comprehension of the structure of matter, the chemical actions of the common
elements and compounds. The impact of chemistry on everyday life and on the
environment is also introduced wherever possible.
Prerequisite: Co-requisite: CH012 (Chemistry for Engineers Laboratory)
School of Industrial Engineering and Management
123 | P a g e
CH012IU Chemistry Laboratory 1 credit
This course is designed for non-chemistry majors, as it is intended for students
pursuing a degree in information technology, electronic and telecommunication. The
course introduces the lab-work with emphasis on techniques relevant to engineering
in chemistry.
Prerequisite: None
PE008IU Critical Thinking 3 credits
This course aims to introduce to you the fundamentals of critical thinking. Its course
integrates basic critical thinking, persuasive communication, and related errors in
thinking lessons with examination of arguments from several sources, including
literature, politics, commercials, and the media.
The primary focus of this course is the development of critical skills. To this end,
you will learn to identify common fallacies, reflect on the use of language for the
purpose of presentation, and think critically about ethical judgments, advertisement,
TV and film, magazines and newspapers.
IS001IU Introduction to Industrial Engineering 1 credit
Introduction to basic engineering concepts. Opportunities are provided to develop
skills in oral and written communication, and department-specific material. Case
studies are presented and analyzed.
IS003RG Introduction to Microeconomic 3 credits
This course seeks to provide an in-depth understanding of basic economic concepts
and scare resources, market in which supply, demand and prices are examined in
connection with consumers as well as producer behavior. The students can also
evaluate various types of market structures as well as the Government intervention
into the market. The subject also provides the students with necessary abilities to
School of Industrial Engineering and Management
124 | P a g e
evaluate economic variables of efficiency. All of the help students plan for a
company’s short-run and long-run development more effectively with consideration
of effects of the government’s policies.
IS004IU Engineering Probability & Statistics 4 credits
The aim of this course is to examine various concepts in probability and statistics.
This course also discusses various statistical techniques and the use of them in
practical situations. Key topics of this course include: descriptive statistics, discrete
and continuous random variables, sampling and sampling distributions, confidence
intervals, hypothesis testing, analysis of variance, simple linear and multiple
regressions.
IS004RG Mechanics of Solids 3 credits
Axial force, shear, moment, and torque in structural members; stress, strain, and
stress-strain relations; principal stresses and strains; torsion of circular shafts;
bending of singly symmetric beams; compound loading; buckling of columns;
statically indeterminate systems.
IS005IU Engineering Mechanics – Statics 3 credits
The classification of systems of forces and their resultants; geometrical and
analytical conditions for the equilibrium of force systems, frames and trusses,
friction, parabolic and catenary cables, centers of gravity.
IS012RG Introduction to Macro economics 3 credits
Knowledge in the subject would enable the students not only to understand various
broad economic issues of a country or a region but also to evaluate macroeconomic
policies as well as economic fluctuations both in a country and in the world. The
subject also provides the students with necessary abilities to evaluate economic
School of Industrial Engineering and Management
125 | P a g e
variables as a whole. All of this helps the students plan for a company’s short- run
and long-run development more effectively with consideration of effects of the
government’s macroeconomic policies.
IS014RG Analytical Physics 2B 3 credits
The course covers the fundamental ideas of geometrical and wave optics and of
modern physics (relativity, quantum, atomic, nuclear and particle physics). It thus
gives an understanding of the nature and behaviors of light, electrons, atoms and
nuclei, which are fundamental to a wide range of modern technologies. Tracing the
historical development these subjects, it explains why relativity and quantum
mechanics are needed, the key equations and concepts, and their applications in
diverse fields from telecommunications to nuclear power.
IS015RG Analytical Physics 2B Lab 1 credit
Laboratory to complement Analytical Physics 2B
IS016IU Engineering Mechanics – Dynamics 3 credits
Kinematics of particles to rigid bodies, rotation of a rigid body, plane motion of a
rigid body, relative motion, the principles of work and energy, impulse and
momentum, impact.
IS017IU Work Design & Ergonomics 4 credits
Problem solving tools (recording and analysis tools, activity charts, line balancing).
Operation analysis, manual work design (principles of motion economy, motion
study). Time study (performance rating and allowances). Work sampling,
predetermined time systems. Work environment design.
School of Industrial Engineering and Management
126 | P a g e
IS017SB Human Factors 3 credits
Introduction: Historical background, definition, importance. Human Machine
Systems/ interfaces, Ergonomics at Work Place. Anthropometric Principles,
Anthropometric Data – Sample, equipment, analysis. Applied Anthropometry and
Work Space Design & Seating, Product design. Work related musculoskeletal
disorders, visual environment, thermal environment, auditory environment,
vibrations. Legal and Safety Aspects
Prerequisite: Engineering Probability & Statistics
Laboratory: This lab gives students opportunities to perform hands-on
experimentation in human factors
IS018IU CAD/CAM 3 credits
This course introduces you to modern manufacturing with three areas of emphasis:
computer aided design, computer aided manufacturing, and computer aided process
planning.
This course provides the important theory, concepts, technology, and the state-of-
the-art development in CAD/CAM. It is very important to understand how the
CAD/CAM systems work and know the current industry status. The subjects
covered in this class include part design specification, NC programming, process
planning, and Computer aided process planning (CAPP), CAD and CAM systems,
and CAD/CAM data exchange.
IS080IU Creative Thinking 3 credits
Students will learn techniques for improving the flexibility and originality of their
thinking and will explore approaches used by managers and organizations to create
and sustain high levels of innovation. Topics include: personal thinking
preferences, everyday creativity and eliminating mental blocks, creative thinking
techniques, idea selection approaches, teaming techniques for creativity, conditions
School of Industrial Engineering and Management
127 | P a g e
that promote creativity, design for interaction, disruptive technologies, and
intellectual property. The course uses fun and hands-on activities to stimulate
innovation.
IS086IU Manufacturing Processes 3 credits
This course provides students with basic background about the manufacturing
processes of products by using machining technologies such as casting, forging,
welding, turning, milling, grinding, . . . These are the basic machining processes and
common use; students can apply and develop in manufacturing areas for produce
new products with advanced technologies.
IS084IU Environmental Science 3 credits
This course provides the basic knowledge of environmental science that includes
general issues, ecology, and the impact of human activities to natural resources and
environment and sustainable development & study all general issues; ecology: the
basics of environmental science; population growth and utilization of natural
resources and the environment; natural resources and current exploitation; pollution
and its impacts, environmental economic and sustainable development & develop
general awareness of the students about possible impacts of human activities on the
environment and natural resources in order to justify relevant economic practices.
IS085IU
CAD/CAM/CNC
3 credits
This course aims to help students to design parts or mechanical products by
CAD/CAM software. The students are studied geometric transformations,
geometric modeling, mathematical representations of curves, Wire frame modeling,
surface and solid modeling. Numerical control systems and machine tools. Manual
part programming, computerized part programming, CAD-CAM-CNC systems
integration.
School of Industrial Engineering and Management
128 | P a g e
IS083IU Capstone design 3 credits
Capstone design is a semester-long course, this work will be done by group project
including 2 – 3 students taken at the senior year. This project reflects practical
industrial system engineering. Each project includes the use of open-ended
problems, development and use of design methodology, formulation of design
problem statements and specification; consideration of alternative solutions,
feasibility consideration and detailed system descriptions. It also includes realistic
constraints (such as economic factors, social impact, and environmental problem).
The students choose the particular design project with approval of appropriate
faculty, advisors. The capstone design topics should be related to the real case from
industry, e.g. projects in the internship company of students in the previous
semester. Also, this project emphasizing the use of knowledge in previous courses
to design, evaluate a system such as facility designs, mathematical modeling and
optimization, implement Lean tools, value stream mapping concepts, time-motion
studies, etc.
IS086IU Introduction to Computing 3 credits
This course will cover some basic topics and applications of Matlab about variables,
data types, statements, control structures, arrays, strings, functions and Graphical
User Interfaces (GUIs). Students are learning consists solely of an extensive lesson,
a broad overview of Matlab.
IS019IU Production Management 3 credits
Introduction to production systems. Production planning and control in decision
making. Forecasting. Aggregate production planning. Capacity planning. Materials
requirement planning. Scheduling. Advanced techniques and approaches in modern
production planning and control for designing manufacturing and service systems.
School of Industrial Engineering and Management
129 | P a g e
IS020IU Engineering Economy 3 credits
Economic decisions involving engineering alternatives; annual cost, present worth,
rate of return, and benefit-to-cost; before and after tax replacement economy;
organizational financing; break-even charts; unit and minimum-cost public sector
studies.
IS022IU Database Systems 3 credits
Introduce the fundamental concepts necessary for the design and use of modern
database systems. Examine the concepts in the order that encountering them in the
actual database design process. Discuss various forms for relations that possess
good properties. Discuss how to use the relational database language SQL to define
the relations and to write SQL statements to insert, delete, retrieve and update the
data. Examine some of the fundamental storage structures that are used in relational
database systems. Discuss some advanced topics in the database management area.
IS023IU Inventory Management 3 credits
Every organization holds stocks of materials to allow for variations and uncertainty
in supply and demand. Stocks are replenished by deliveries from suppliers and
reduced to meet demands from customers. Inventory management is responsible for
all aspects of stock control. High stock buffer comes at a high price and
organizations are continually looking for ways of reducing their inventory costs
without affecting service.
This course provides students with an understanding of the principles, processes and
methods for the effective management of inventory in relation to other activities in
the supply chain. The course examines both the independent demand and dependent
demand methods. Attention is given to the information needed to support these
methods, including information from the inventory management information
system, forecasts of demand and planned operations.
School of Industrial Engineering and Management
130 | P a g e
IS025IU Quality Management 3 credits
This course introduces to the principles of quality management, with an emphasis
on cross-functional problem solving. It provides methods for quality planning,
improvement and control with applications in manufacturing and service. The
students also gain a basic understanding of the philosophy, conceptual frameworks
and the tools of the Total Quality Management.
IS026IU Project Management 3 credits
Project management” course is developed to provide the principal concept on
project management which was characterized by the project management body of
knowledge guide (PMBOK Guide). The course emphasizes the five project process
groups of initiating, planning, executing, controlling and closing, and the nine
knowledge areas of project integration, scope, time, cost, quality, human resources,
communication, risk, and procurement management.
In addition, this course also provides a computer aid for project management by
introducing the application of Microsoft Project and project scheduling.
IS024IU Probabilistic Models in Operations Research 3 credits
To introduce the student into basic topics of mathematical modeling process of
decision problems in complex stochastic industrial environments. This course
covers stochastic operations research models, algorithms, and applications.
Markov chains and queuing models are discussed. Renewal theory, reliability
theory, and stochastic models for manufacturing systems are also taken into
consideration. Students will acquire in this course the basis for the study of other
probabilistic topics in their curriculum.
School of Industrial Engineering and Management
131 | P a g e
IS027IU Scheduling and Sequencing 3 credits
This course gives an introduction to scheduling problems: techniques, principles,
algorithms and computerized scheduling systems. Topics include scheduling
algorithms for single machine, parallel machine, flow shop, job shop and also
solution methodologies such as heuristic procedures, constructive algorithms,
branch and bound approaches, and genetic algorithms.
IS028IU Simulation Models In IE 4 credits
Systems modeling and simulation techniques find applications in fields as diverse as
physics, chemistry, biology, economics, medicine, computer science, and
engineering. The purpose of this course is to introduce fundamental principles and
concepts in the general area of systems modeling and simulation. Topics to be
covered in this course include basics of discrete-event system simulation,
mathematical and statistical models.
IS029IU Logistics Engineering and Supply Chain Design 3 credits
Logistics and Supply chain management involves a number of decisions that benefit
by quantitative techniques of analysis and design. The course will explore modeling,
computation implementation of solutions in some areas of Logistics and Supply
Chain Management. The content also includes material flow management across the
supply chain, value management and analysis of total supply chain costs, robust
design of supply chains, co-ordination of supply chain decisions and handling of
uncertainties in supply chain management.
School of Industrial Engineering and Management
132 | P a g e
IS031IU Experimental Design 3 credits
An applied statistics course on planning, statistical analysis, and interpretation of
experiments of various types. Coverage includes factorial designs, randomized
blocks, Latin squares, incomplete block designs, nested, crossover designs, and
optimal design.
IS032IU Facility Layout 3 credits
This course focuses on the fundamentals of the design, layout, and location of
industrial and nonmanufacturing facilities. Selection of machines and material
handling equipment and their efficient arrangement. Emphasis on quantitative
methods. Warehouse layout. Facility location theory.
IS033IU Multi- Criteria Decision Making 3 credits
Decision making is one of the important parts in operation research or management
science. Decision making techniques help management to choose the best alternative
based on quantitative criteria. This course provides students with basic knowledge
about decision model formulation, so that they can make decisions based on the
results of the models. This course also provides students with specific techniques for
practical applications in production and services.
IS034IU Product Design and Development 3 credits
Product Design and Development course introduces to the students the role of
multiple functions in creating a new product (e.g. marketing, finance, industrial
design, engineering, production) as well as tools and methods for product design
and development. Highlight of the course is the project in which the students will
design a new product and produce a prototype version of it. Throughout the project,
the students will apply their learned principles and methods of product development
in a realistic context. The course also enables the students to coordinate
School of Industrial Engineering and Management
133 | P a g e
interdisciplinary tasks in order to achieve a common objective.
IS035IU Systems Engineering 3 credits
Systems Science is the course of methods to developing and analyzing the systems.
This course provides the knowledge and skills necessary for the engineers in the
development process and systems analysis (manufacturing and services): systems
engineering processes, methods of evaluation, selection and integration of system
components, system simulation, and assessment of reliability, availability, and
serviceability of the systems.
IS040IU Management Information Systems 3 credits
Integrates topics of management and organization theory, information and
communication theory, and systems theory relevant to managing an organization’s
information resources. Includes computer hardware and software,
telecommunications, and database concepts and emphasizes the e-commerce and
Internet based business models to get a competitiveness of global based business
environments. This course meets the requirements for a Technology Intensive
course.
IS041IU Lean Production 3 credits
This course will help students to understand the concepts and philosophies of lean,
get familiar with lean tools/techniques, especially the concepts behind the
tools/techniques used, and develop analytical, problem solving skills. Therefore, the
students will be able to join well in most of foreign-invested enterprises or large
organizations in Vietnam after graduation. Ultimately, they will be able to apply
lean philosophy creatively in each unique practical situation.
School of Industrial Engineering and Management
134 | P a g e
IS044IU Computer Controls of Manufacturing Systems 3 credits
Programmable automation applied to manufacturing. Controller architecture,
sensors and automatic data acquisition, computer control of actuators, continuous
and discrete control of processes, computer integration and local area networks.
IS045IU Leadership 3 credits
Organizational development and learning; leading learning organizations; leadership
theories and perspectives, followership, leadership development; coaching and
mentoring; leading groups and teams, leadership and diversity.
IS052IU Internship 1 2 credits
This course is an internship and is designed to supplement traditional classroom-
based learning with experiential learning. The internship provides students with the
opportunity to practically apply knowledge gained in their courses of Industrial &
Systems Engineering.
Internships can be with a variety of host organizations, including foreign companies,
government agencies and private industries. A minimum of 15 working days is
IS043IU Flexible Manufacturing Systems 3 credits
This course studies the concept and method of flexible manufacturing system
planning and control. The study covers flexible manufacturing system technology,
flexible manufacturing system component, flexible manufacturing system
performance evaluation: analytical model, simulation model, flexible manufacturing
system configuration planning: routing optimization, capacity optimization, tools
optimization, flexible manufacturing system production planning and control:
batching, set-up planning. The course provides ability to plan and control flexible
manufacturing system.
School of Industrial Engineering and Management
135 | P a g e
required (5 days visit factory, 5 days write report, 5 days to get approval from
supervisor). Whether the students have arranged their internship themselves or have
been assisted in arranging one by the program assistant or other lecturers, they
should let the program assistant know once there is a problem with the internship.
The program coordinator can either intervene appropriately or see if the students can
be transferred to a different company.
Students should be both supported and challenged and encouraged to take initiative
and develop life-long learning skills. Each intern works under a site supervisor at the
host organization and an advisor from IU (ISE’s lecturer). The role of the site
supervisor (or advisor) is to oversee the students and provide mentorship throughout
the internship. The site supervisor and advisor will complete a performance
evaluation form at the conclusion of the internship. Students will discuss their
experiences through weekly reports and online discussions.
IS053IU Internship 2 3 credits
This course is an internship and is designed to supplement traditional classroom-
based learning with experiential learning. The internship provides students with the
opportunity to practically apply knowledge gained in their courses of Industrial &
Systems Engineering.
Internships can be with a variety of host organizations, including foreign
companies, government agencies and private industries. A minimum of 320
working hours or 40 working days is required. Whether the students have arranged
their internship themselves or have been assisted in arranging one by the program
assistant or other lecturers, they should let the program assistant know once there is
a problem with the internship. The program coordinator can either intervene
appropriately or see if the students can be transferred to a different company.
Students should be both supported and challenged and encouraged to take initiative
and develop life-long learning skills. Each intern works under a site supervisor at
School of Industrial Engineering and Management
136 | P a g e
the host organization and an advisor from IU (ISE’s lecturer). The role of the site
supervisor (or advisor) is to oversee the students and provide mentorship throughout
the internship. The site supervisor and advisor will complete a performance
evaluation form at the conclusion of the internship. Students will discuss their
experiences through weekly reports and online discussions.
IS054IU Engineering Drawing 3 credits
This course provides students skills to present and interpret spatial models on planar
models, present engineering drawings according to international standards (ISO).
Methods of presenting models: orthogonal projection, isometric projection, oblique
projection… Apply the projections to present objects in the drawings.
IS055IU Principles of Logistics and Supply Chain
Management
3 credits
This is an introductory course to Logistics and supply chain management (SCM). It
provides an overview of fundamental concepts, business processes and models/tools.
The objective of this course is to identify problems, issues and strategies in today’s
supply chain operations via real-world cases. Analytical models and technical tools
are introduced as needed. This course combines SCM business knowledge with
analytical thinking and pinpoints the role of SCM relative to other business
disciplines. It serves as a roadmap to more in-depth courses on related topics.
IS056IU Introduction to Logistics and Supply
Chain Management
3 credits
This course focuses on familiarizing new Logistics & Supply Chain Management
students to Logistics & Supply Chain Management in general and Logistics &
Supply Chain Management at IU. The intention is to prepare students to become
successful at IU and successful Logistics & Supply Chain Management Engineers.
School of Industrial Engineering and Management
137 | P a g e
IS058IU Time series & Forecasting Techniques 3 credits
The simplest definition of economic forecasting is that it is a process that has as its
objective the prediction of future events or conditions to reduce that uncertainty so
that our decisions will be better ones.
Specific objectives are to instruct you in:
1. The formulation and specification of forecasting models;
2. Data collection, interpretation, organization, and analysis for building forecasting
models;
3. Fundamental statistical and probability concepts used in forecasting;
4. The existence of a hierarchy of forecasting models;
5. The use of econometric software in a lab setting.
IS059IU Materials Handling Systems 3 credits
Proper methods for material handling and storage including safety practices, proper
equipment usage, engineering controls, and personal protective equipment. Included
are procedures for storage of non-hazardous and hazardous materials, material
handling equipment preventative maintenance, and motor fleet safety.
IS057IU Warehouse Engineering Management 3 credits
This course provides the students with an understanding of the principles, processes
and techniques for the effective planning, management and operation of warehouses.
Through this exposure, students will gain insights into how warehousing adds value
to the organization’s supply chain and how warehousing decisions impact the
performance of the organization.
School of Industrial Engineering and Management
138 | P a g e
IS063IU Sustainability in Supply Chain 3 credits
There is global experience and examples that show how comprehensive
organizational environmental sustainability and archaeological criteria integrated
into the supply chain management/procurement process and decision-making of
public and private agencies, organizations and corporate entities can improve
financial and environmental performance, while addressing ethics, social
regeneration, resource/waste impacts and economic development concerns. This
course will allow students to participate in applied research projects that include
designing supply chain management and procurement systems and products, which
address environmental, social and ethical considerations in organizational and
corporate policy, program and reporting.
IS064IU Entrepreneurship in Supply Chain 3 credits
The nature and importance of entrepreneurship; forms of entrepreneurship; the
entrepreneurial process; the entrepreneurial mind; creativity, ideas and innovation;
screening entrepreneurial opportunities; identifying resources to support
entrepreneurial activities; intellectual property issues; accessing finance and other
resources; the entrepreneurial team; assessing risk; business structure and ethics;
entrepreneurial strategy; finding and reaching customers and marketing innovation;
feasibility planning.
IS062IU E-Logistics in Supply Chain Management 3 credits
Comprehensive inquiry into the role of e-commerce in collaborative distribution and
logistics relationships. Special attention is afforded to resource and technology
interdependencies, exchange governance mechanisms and relationship management
bench-marking. Emphasis is given to the tools for creating value in the supply
chain.
School of Industrial Engineering and Management
139 | P a g e
IS065IU Supply Security and Risk Management 3 credits
Supply security and risk management have become major business concerns in view
of the need to protect the supply chain and maintain business continuity in the wake
of high-consequence disruptive events. This course provides a broad overview of
key supply chain security areas and issues in the context of homeland security.
IS066IU Data Mining in Supply Chain 3 credits
Data mining refers to a family of techniques used to detect interesting nuggets of
relationships/knowledge in data. With the availability of large databases to store,
manage and assimilate data, the new thrust of data mining lies at the intersection of
database systems, artificial intelligence and algorithms that efficiently analyze data.
The distributed nature of several databases, their size and the high complexity of
many techniques present interesting computational challenges.
An overview of business intelligence in the field of supply chain management and
marketing. Addresses how to leverage business intelligence systems to define KPIs,
sharpen the accuracy of forecasting and planning, track business activities, and
deliver dashboards, scorecards, strategic reporting, and operational/real-time
reporting to enhance decision making for supply chain and marketing. SAP business
intelligence solution is introduced to illustrate the concepts.
IS067IU International Transportation & Logistics 3 credits
Students learn the significance of international traffic and transport logistics.
Student will learn basic methods and applications of operations research to
implement, operate and optimize overall company material flow technical networks.
This applies in particular to the subject of the optimal arrangement of sources and
outflows and their dimension as well as their optimal interconnection from a
transport technology point of view.
School of Industrial Engineering and Management
140 | P a g e
Topics include: requirements for logistics companies; active in road freight, rail, air
and sea transport; competition in international transport; competition in
international transport; cost accounting for freight forwarding; price setting in road
freight, rail, air and sea transport; information management in freight forwarding.
IS068IU Procurement Management 3 credits
This unit covers the following: the role of Purchasing and Procurement in Supply
Chain Management, purchasing procedures, supplier sourcing and management,
negotiations, supplier relationships, specifying product quality, matching supply
with demand and support tools for purchasing and procurement. Comprehensive
theories and models developed by practitioners are examined.
IS072IU Port Planning and Operations 3 credits
This course provides the students with an understanding of port system,
geographical location of ports, related planning and operational issues. Methods and
processes for port planning and design. Besides that, the students are provided the
knowledge about Inland connectivity, port’s linkage to transport infrastructure,
intermodal connections, and marine operations in ports. Traffic management, cargo
handling, terminal operations, facilities and equipment, port security.
IS073IU Business Law 3 credits
The aim of this course is to:
• Familiarize the student with legal language; basic concepts, principles and
general knowledge of business Law.
• Introduce to students about main business forms in Vietnam and regulations
for each. Also, possibility of reorganization and Insolvency for enterprises,
as main subject matter of this course.
• Increase the student’s understanding of the Vietnamese regulations over
School of Industrial Engineering and Management
141 | P a g e
business dispute resolution.
• Expose the student to legal reasoning and develop his/her ability to apply
legal concepts.
• Introduce students to main trade international organizations and main
international trade rules.
• Develop problem solving and legal analyzing skills and apply it to day-to-
day practical situations.
IS074IU Import & Export Management 3 credits
The basic objective of this course is to provide to students with the necessary
knowledge, skills and foundations for acquiring a wide range of rewarding careers
into the rapidly expanding world of Import & Export Management. In addition, this
course aims at imparting knowledge of trade procedures and documentation
formalities with a view to enable the participants to develop a systematic approach in
handling trade transaction and incidental paper work.
IS076IU Introduction to Computing – Matlab
Application
3 credits
Introduction to MATLAB, a powerful programming package for engineers and
scientists. Students will learn the fundamentals of MATLAB, how to write programs
in MATLAB, and how to solve engineering problems using MATLAB. Emphasis on
problem-solving skills and mathematical tools of importance in engineering.
IS077IU Introduction to Programming –
C++/C#, Python
2 credits
Introduction to programming in C++. Operators and the C++ system; fundamental
data types; flow of control; functions; arrays, pointers, and strings; application of
C++ for solving engineering problems and numerical analyses.
School of Industrial Engineering and Management
142 | P a g e
IS079IU Scientific Writing 2 credits
This course is offered for undergraduate students at School of IEM, IU. It aims to
improve students’ academic and scientific writing in English, and helps them
successfully complete course reports, thesis, dissertations, and articles for
publication as well as doing a proper presentation, etc. Upon completion of the
course, we hope our students become more effective, more efficient, and more
confident writers.
IS082IU Retail Management 3 credits
This course provides the student with a comprehensive view of retailing and an
application of marketing concepts in a practical retail managerial environment. As a
potential marketing manager, this course will give students insight into the retailing
environment of which students will be a part and allow students to make informed
decisions in your interaction with retailers. The course also provides a good
foundation for those interested in owning or running a small retail business or those
interested in pursuing a retail career as a merchandise buyer or store manager.
IS081IU Deterministic Models in Operations Research 4 credits
Elements of problem solving and algorithmic design. Use of numerical analysis and
linear algebra to solve industrial engineering problems. Topics to be covered
include: problem formulations, simplex method in tableau form, duality theory, an
introduction to the geometry of the simplex method, sensitivity analysis,
transportation and network flow problems, optimality conditions and basic
numerical methods for nonlinear programs.
School of Industrial Engineering and Management
143 | P a g e
BA003IU Principles of Marketing 3 credits
The course of Principles of Marketing provides the students with necessary
information on the basic concepts of Marketing. It focuses on the understanding of
Market Demand and Customers Behaviors as well as Marketing strategies developed
by firms in terms of Pricing, Product, Place, Promotion, etc. The course also
mentions various methods to market research and environmental factors that affects
the marketing activities.
BA028IU Organizational Behavior 3 credits
The nature of organizational behavior, individual behavior in organizations;
personality; perception; motivation concepts; decision-making; cultural differences;
leadership; managing and understanding groups and teams; influence and power;
managing organizations through change; stress management and organizational
culture.
BA032IU Sales Management 3 credits
Problems, policies, and functions of sales management as the vital link between
selling and marketing. Role of the sales manager in the development of a successful
salesforce. Topics include territory and market analyses, compensation, sales
planning, and control.
BA156IU Human Resource Management 3 credits
This course studies the effects of sociological, legal, economic, ethical, political,
strategic and environmental changes, issues and developments on human resource
management processes, practices, programs and policies.
School of Industrial Engineering and Management
144 | P a g e
BA184IU Financial Accounting 4 credits
This course develops a basic understanding on the theories, principles, and
applications of accounting and financial reporting, essentials in the US standard,
including topics such as the theory of debit and credit, accounts, special journals, the
accounting cycle, notes and interest, accruals and deferrals, cash, receivables,
inventory, fixed assets, and the preparation of financial statements. In general, its
primary aim is to provide the basic knowledge in preparing and processing
accounting transactions in order to present financial details in a relevant and
effective manner, as well as interpreting this accounting information for different
types of external and internal investors, management and other accounting
information users.
School of Industrial Engineering and Management
145 | P a g e
DISCIPLINARY
PROCEDURES &
RIGHTS
School of Industrial Engineering and Management
146 | P a g e
ĐẠI HỌC QUỐC GIA TP.HCM
TRƯỜNG ĐẠI HỌC QUỐC TẾ
CỘNG HÒA XÃ HỘI CHỦ NGHĨA VIỆT
NAM
Độc lập – Tự do – Hạnh phúc
Thành phố Hồ Chí Minh, ngày 9 tháng 8 năm
2019
NỘI QUY SINH VIÊN
(Ban hành theo Quyết định số 276/ QĐ-ĐHQT/ĐT ngày 10/9/2008
của Hiệu trưởng trường Đại học Quốc tế Tp. HCM)
Để đảm bảo môi trường sinh hoạt học tập tốt tại trường Đại học Quốc tế - Đại học
Quốc gia TP.HCM, trường Đại học Quốc tế đề ra Nội quy sinh viên như sau:
1. Nghiêm cấm mọi hành vi gian lận với bất kỳ hình thức nào trong nhà trường.
2. Lên lớp đúng giờ, trang phục gọn gàng lịch sự kín đáo, ứng xử giao tiếp văn
minh lịch sự phù hợp với môi trường sư phạm. Ngôn ngữ giao tiếp trong
khuôn viên Nhà trường bằng tiếng Anh.
3. Phải tôn trọng lễ phép với thầy cô giáo, cán bộ viên chức, lịch sự và hiếu
khách, hòa đồng và sẵn sàng giúp đỡ bạn bè.
4. Đi xe buýt cần xếp hàng thứ tự trước sau khi lên xe, giữ gìn vệ sinh, văn
minh lịch sự và trật tự trên xe buýt.
5. Giữ gìn vệ sinh chung, sử dụng nhà vệ sinh theo đúng qui định. Không mang
hoặc sử dụng các loại thức ăn, nước uống vào phòng học, giảng đường,
phòng thí nghiệm.
6. Không được nằm ở khu vực hành lang, trên lối đi, được nghỉ trưa tại phòng
học từ 11 giờ 30 đến 12 giờ 30.
School of Industrial Engineering and Management
147 | P a g e
7. Phải đảm bảo an ninh trật tự trong khuôn viên nhà trường, không gây tiếng
ồn, không sử dụng các loại phương tiện gây tiếng ồn; không chơi thể thao,
chạy nhảy đùa giỡn trong phòng học, khu vực gần phòng học, khu vực hành
chính gây ảnh hưởng tới hoạt động của nhà trường.
8. Tuân thủ theo tất cả quy định chung của tòa nhà Điều hành ĐHQG-HCM.
Các loại phương tiện vào trường phải gửi đúng nơi quy định.
9. Giữ gìn bảo quản tài sản và các trang thiết bị của nhà trường. Thực hiện tốt
quy định về việc mượn và trả thiết bị phục vụ công tác giảng dạy. Không tự
ý di chuyển, sắp xếp, điều chỉnh sử dụng các thiết bị phục vụ giảng dạy.
Không dán giấy, viết vẽ trên tường, bàn học. Chỉ được phép tổ chức hội họp,
di chuyển bàn ghế, trang trí phòng học, sử dụng các trang thiết bị khi có sự
chấp thuận của Phòng Quản trị Thiết bị.
10. Không được sử dụng trang thiết bị của nhà trường vào các mục đích khác với
học tập và nghiên cứu.
11. Không đùa giỡn trong thang máy, tùy tiện bấm chọn các tầng khi không có
nhu cầu.
12. Cấm hút thuốc, uống rượu bia trong khuôn viên trường học.
13. Cấm thành lập, tham gia các hoạt động mang tính chất chính trị pháp luật, tệ
nạn xã hội; tổ chức tham gia các hoạt động tập thể mang danh nghĩa nhà
trường khi chưa được Hiệu trưởng cho phép.
14. Cấm sản xuất, buôn bán, vận chuyển, tàng trữ, phát tán, sử dụng các loại vũ
khí, chất gây nổ, chất ma túy, hàng cấm …; các tài liệu, ấn phẩm phản động,
đồi trụy, cấm truy cập các nguồn thông tin không lành mạnh trên Internet.
Nghiêm cấm tổ chức, tham gia truyền bá các hoạt động mê tín dị đoan, các
hoạt động của các tổ chức, tôn giáo trong nhà trường và các hoạt động vi
phạm đạo đức khác.
School of Industrial Engineering and Management
148 | P a g e
15. Nghiêm cấm các hình thức trộm cắp hoặc phá hoại tài sản công và tài sản cá
nhân người khác.
16. Nội dung này được áp dụng kể từ ngày ký. Mọi vi phạm tùy mức độ cụ thể
sẽ được xử lý từ khiển trách đến buộc thôi học. Trường hợp nghiêm trọng
giao cho cơ quan chức năng xử lý theo qui định của pháp luật.
Hiệu trưởng
DR. TRẦN TIẾN KHOA
School of Industrial Engineering and Management
149 | P a g e
A1. QUY ĐỊNH CHUYỂN ĐỔI CHƯƠNG TRÌNH
1. Chuyển đổi ngành học do trường cấp bằng:
Nguyên tắc chung:
- Thực hiện các văn bản: công văn số 1479/ĐHQG-ĐH&SĐH ngày
11/9/2008, Quy chế 1368 và công văn 1391/ĐHQT-ĐH&SĐH ngày
09/8/2010.
- Ngành được chuyển sang còn chỉ tiêu đào tạo; số lượng sinh viên chuyển
sang không quá 10% tổng chỉ tiêu được giao của ngành.
- Trường phải quy định các môn học cần chuyển đổi, môn học được công nhận
đảm bảo tích lũy kiến thức của chương trình đào tạo (CTĐT) ngành chuyển
đến. Các môn học tương đương phải được thể hiện trong CTĐT và quy định
học vụ của nhà trường.
Đối với các trường hợp không đạt yêu cầu xét tuyển xét tuyển đầu vào đối với khóa
tuyển sinh tương ứng của ngành xin chuyển đến thì phải thỏa các điều kiện sau:
- Có lý do chính đáng về việc chuyển ngành học;
- Kết quả học tập ít nhất 3 học kỳ đầu tiên (không tính học kỳ học ngoại ngữ)
đạt từ loại khá trở lên và đã tích lũy đủ số tín chỉ tối thiểu cho mỗi học kỳ
theo quy định.
2. Chuyển đổi ngành học từ chương trình liên kết do trường nước ngoài cấp
bằng sang chương trình do trường Đại học Quốc tế cấp bằng:
Nguyên tắc chung:
- Chương trình liên kết có Quyết định của ĐHQG-HCM về việc liên kết đào
tạo.
- Thỏa các quy định về chuyển đổi ngành học trong các chương trình so
trường cấp bằng theo nội dung mục 1.1 của văn bản này.
School of Industrial Engineering and Management
150 | P a g e
Đối với các trường hợp không đạt điều kiện trúng tuyển đầu vào của khóa tuyển sinh
tương ứng của ngành xin chuyển đến thì phải thỏa các điều kiện sau:
- Chương trình liên kết có cùng phương thức tuyển sinh, cùng nhóm ngành với
chương trình do trường ĐH Quốc tế cấp bằng.
- Sinh viên có hoàn cảnh thực sự khó khăn không thể theo học tiếp giai đoạn 2
của chương trình liên kết.
- Đã hoàn thành giai đoạn 1 của chương trình liên kết (không tính học kỳ học
ngoại ngữ) và có điểm trung bình tích lũy tại thời điểm xin chuyển ngành
thuộc top 10% hoặc >= 7,0 điểm (thang điểm 10).
- Số lượng sinh viên diện 2.2 chuyển sang không quá 5% tổng chỉ tiêu được
giao của ngành.
School of Industrial Engineering and Management
151 | P a g e
A2. QUI CHẾ ĐÀO TẠO THEO HỌC CHẾ TÍN CHỈ - BẬC ĐẠI HỌC
1. Chương trình đào tạo (CTĐT)
CTĐT là tập hợp các môn học được bố trí giảng dạy học tập kế tiếp nhau theo một
trình tự khoa học nhằm đào tạo người học có đủ kiến thức, khả năng và tiềm năng
cho một lĩnh vực khoa học kỹ thuật. Người học hoàn thành một CTĐT thì được cấp
một văn bằng tương ứng.
Nội dung đào tạo trong toàn khóa học của từng ngành ở mỗi trình độ được thể hiện
thành CTĐT. CTĐT của mỗi ngành đào tạo do Trường xây dựng trên cơ sở khung
chương trình do Bộ GD&ĐT qui định và tham khảo chương trình đào tạo của các
trường đại học danh tiếng nước ngoài. Mỗi CTĐT có thời lượng từ 135 đến 145 tín
chỉ và thời gian đào tạo 4 năm (không tính chứng chỉ Giáo dục quốc phòng, Giáo
dục thể chất) bao gồm các loại môn học như sau:
1.1 Nhóm môn học bắt buộc gồm những môn học chứa đựng những nội dung chính
yếu của ngành đào tạo và bắt buộc sinh viên phải tích lũy.
1.2 Nhóm môn học tự chọn là những môn học mà sinh viên được tự chọn để tích lũy
đủ số tín chỉ qui định. Trong đó có thể chia ra:
• Môn học tự chọn định hướng: là những môn học tự chọn được xác định theo
định hướng chuyên ngành của một CTĐT, chứa đựng những nội dung cần
thiết mà sinh viên phải chọn trong số các môn học tự chọn do trường qui
định theo nhóm ngành và ngành.
• Môn học tự chọn tự do: là các môn học mà sinh viên có thể chọn tùy ý theo
học.
• Việc hoàn tất đạt yêu cầu của CTĐT là điều kiện để người học được cấp
bằng cho mỗi cấp học.
2. Tín chỉ
School of Industrial Engineering and Management
152 | P a g e
Tín chỉ là một đơn vị dùng để lượng hóa khối lượng lên lớp và tự học bắt buộc đối
với một sinh viên để đạt được các yêu cầu học tập. Một tín chỉ được qui định bằng
15 tiết lý thuyết, hoặc 30 đến 45 tiết thực hành và thời gian tự học cần thiết theo ước
lượng chung của Nhà trường trong học kỳ: học 1 tiết lý thuyết sinh viên phải học 2
tiết tự học.
3. Khóa học, năm học và học kỳ
3.1 Khóa học
Khóa học là thời gian qui định để sinh viên hoàn tất một CTĐT của một ngành nhất
định. Khóa học theo một CTĐT được quy thành số học kỳ chính hay thành số tín chỉ
tối thiểu phải tích lũy. Tùy ngành nghề đào tạo, khóa học được thiết kế từ 8 đến 10
học kỳ chính cho bậc đại học. Tùy theo khả năng, sinh viên có thể rút ngắn hoặc kéo
dài thời gian học tập, nhưng không được kéo dài quá thời gian qui định cho toàn
khóa học như sau: rút ngắn tối đa 2 học kỳ, kéo dài tối đa 4 học kỳ.
3.2 Năm học và học kỳ
Năm học gồm 2 học kỳ chính và 1 học kỳ hè. Học kỳ là một khoảng thời gian nhất
định gồm một số tuần dành cho các hoạt động giảng dạy, học tập, và đánh giá kết
quả học tập.
• Học kỳ chính gồm 16 đến 20 tuần, trong đó có ít 'nhất 14 tuần dành cho các
hoạt động giảng dạy, học tập và các tuần còn lại dành cho việc kiểm tra, thi,
bảo vệ luận văn, đánh giá và đăng ký học tập.
• Học kỳ hè là học kỳ không bắt buộc phải học. Khi sinh viên có nhu cầu và
Nhà trường có điều kiện sẽ tổ chức học kỳ hè, gồm 8 đến 10 tuần trong đó có
ít nhất 7 tuần dành cho việc giảng dạy, học tập, kiểm tra và một tuần dành
cho việc thi cử, đánh giá.
4. Lớp học
Lớp sinh viên:
School of Industrial Engineering and Management
153 | P a g e
Được tổ chức cho các sinh viên học cùng ngành chuyên môn trong cùng một khóa
đào tạo. Lớp sinh viên được tổ chức tương đối ổn định từ đầu đến cuối khóa học
nhằm duy trì các sinh hoạt đoàn thể, các phong trào thi đua, các hoạt động chính trị-
xã hội, văn hóa thể thao và để quản lý sinh viên trong quá trình học tập theo qui định
của Nhà trường. Nhà trường căn cứ vào số lượng sinh viên của mỗi khóa, mỗi ngành
đào tạo, để qui định số lớp sinh viên.
Lớp môn học:
Bao gồm các sinh viên theo học cùng môn học, có cùng thời khóa biểu của môn học.
Mỗi lớp môn học đều được ký hiệu bằng một mã số riêng. Số lượng sinh viên của
lớp môn học được Trường quy định như sau:
• Với môn cơ bản như Toán, Lý, Hóa v.v.v. . .: tối đa là 120 sinh viên.
• Với môn học cơ sở ngành và môn chuyên ngành: tối đa 60 sinh viên.
• Với môn ngoại ngữ: tối đa 30 sinh viên.
• Sĩ số tối thiểu của một lớp môn học sẽ do Ban Giám hiệu quyết định từng
trường hợp cụ thể.
5. Môn học- Môn học tương đương - Điểm môn học
5.1 Môn học
5.1.1 Môn học là tập hợp tất cả các dạng hoạt động học tập của một phần khối lượng
kiến thức. Tùy theo khối lượng kiến thức của môn học yêu cầu, mỗi môn học được
lượng hóa bằng một số tín chỉ và định danh bằng mã số môn học.
5.1.2 Các dạng hoạt động học tập của một môn học bao gồm số tín chỉ lý thuyết, số
tín chỉ rèn luyện kỹ năng: bài tập, thí nghiệm, thực tập, seminar, tiểu luận, v.v... và
số tín chỉ tự học.
5.1.3 Tùy theo yêu cầu về mặt kiến thức, môn học có thể có một hay nhiều môn học
tiên quyết, một hay nhiều môn học trước. Đối với mỗi sinh viên theo học một CTĐT
School of Industrial Engineering and Management
154 | P a g e
nào đó, các môn học được xếp thành: các môn học bắt buộc, các môn học tự chọn
định hướng, các môn học tự chọn tự do.
• Môn học tiên quyết: các môn học là tiên quyết đối với môn học A là các môn
học mà sinh viên phải theo học trước và phải thi đạt mới được theo học môn
học A.
• Môn học trước: môn học A được gọi là môn học trước của môn học B nếu
như sinh viên đã đăng ký học và có điểm thi của môn học A, kể cả điểm I,
W, X, Z.
• Môn học tương đương: một hay nhiều môn học được gọi là tương đương với
môn học A của CTĐT khi chúng có nội dung và thời lượng đáp ứng được
yêu cầu của môn học A đó (có nội dung giống nhau từ 80% trở lên và có số
tín chỉ tương đương hoặc lớn hơn). Danh mục các môn học tương đương
được Nhà trường quy định theo đề nghị của Trưởng Khoa.
• Môn học thay thế: môn học thay thế là môn học được sử dụng để thay thế
một môn học khác có trong chương trình đào tạo nhưng không còn tổ chứa
giảng dạy nữa.
5.2 Điểm môn học
5.2.1 Điểm cuối cùng dùng để đánh giá một môn học được gọi là điểm môn học.
Điểm môn học được đánh giá dựa trên kết quả học tập toàn diện của sinh viên trong
suốt học kỳ đối với môn học đó.
5.2.2 Điểm môn học có thể bao gồm các loại điểm thành phần sau:
• Thực hành: bài tập, thực hành, seminar, tiểu luận...
• Kiểm tra giữa học kỳ.
• Thi cuối học kỳ.
5.2.3 Điểm thành phần:
School of Industrial Engineering and Management
155 | P a g e
Các điểm thành phần được cho dưới dạng số nguyên từ 0 đến 100 và điểm tổng kết
môn học là con số đã làm tròn thành số nguyên.
Tỷ lệ các điểm thành phần trong kết quả cuối cùng của một môn học được qui định
như sau :
• Điểm thực hành, bài tập, tiểu luận : từ 20% - 40%
• Điểm kiểm tra giữa kỳ : từ 20% - 40%
• Điểm thi cuối học kỳ : từ 40% - 60%
Riêng đối với các môn thực hành, được quy định như sau:
• Điểm các bài thực hành trong học kỳ : từ 70 – 80%
• Điểm thi cuối học kỳ : từ 20 – 30%
Các trường hợp không thi giữa kỳ mà thay thế bằng hình thức khác phải có đề xuất
của lãnh đạo Khoa và có sự phê duyệt của Ban Giám Hiệu trong vòng 2 tuần (1 tuần
đối với học kỳ hè) kể từ khi môn học bắt đầu. Những qui định này thay đổi tùy theo
môn học và phải được ghi trong đề cương chi tiết các môn học và đề cương được
công bố trước sinh viên ở buổi lên lớp đầu tiên. Đối với các môn học đã đăng ký và
đã được chấp nhận, sinh viên có trách nhiệm thực hiện đầy đủ và nghiêm túc mọi
yêu cầu của cán bộ giảng dạy về việc lên lớp, làm bài tập, thực hành thí nghiệm,
thực tập, tham gia thảo luận, dự kiểm tra giữa môn học và thi kết thúc môn học. Nếu
không thực hiện phần việc nào, sinh viên sẽ nhận điểm không (0) cho điểm thành
phần tương ứng.
School of Industrial Engineering and Management
156 | P a g e
Mức điểm đối với một môn học
Điểm môn học được làm tròn đến một chữ số thập phân của điểm trung bình tính
theo phân lượng của các điểm thành phần. Trường sẽ tiếp tục qui đổi điểm theo
thang điểm 4 hay 100 ra thang điểm chữ khi cần thiết.
5.2.4 Những ký hiệu sau đây được sử dụng trong các trường hợp đặc biệt: Cấm thi
hoặc Vắng thi không phép (F); Miễn học hoặc Bảo lưu (WH); Vắng thi có phép
hoặc điểm chưa hoàn tất (I); Chưa có điểm thi (NA);
5.2.5 Điểm chưa hoàn tất (điểm I): là điểm tạm thời do cán bộ giảng dạy phụ trách
môn học xem xét và cho đối với những sinh viên vì những lý do chính đáng không
thể hoàn tất các yêu cầu của môn học vào cuối mỗi học kỳ hay khóa học.
• Điều kiện để sinh viên có thể xin nhận điểm “I” của môn học: Sinh viên đã
dự học, dự các lần kiểm tra giữa học kỳ, các hoạt động liên quan đến môn
học như thí nghiệm, thực hành.
• Đã nộp học phí của môn học.
• Vì các lý do bất khả kháng nên vắng mặt trong buổi kiểm tra, thi cuối học kỳ
(ốm đau, tai nạn…).
• Những thủ tục sau đây phải được thực hiện:
• Trường hợp đơn xin điểm I xảy ra trong thời điểm trước ngày thi: sinh viên
làm đơn kèm theo
• chứng cứ hợp lệ, trình bày với CBGD. Dựa vào ý kiến của CBGD và ý kiến
đồng ý của Lãnh đạo
• Khoa, phòng Đào tạo xem xét về việc ra quyết định cho phép sinh viên nhận
điểm I. Trường hợp sinh viên đau ốm bất thường hoặc lý do chính đáng bất
khả kháng không tham gia thi: sinh viên làm đơn kèm chứng lý hợp lệ tại
phòng Đào Tạo trong vòng 3 ngày kể từ ngày thi
School of Industrial Engineering and Management
157 | P a g e
• Những trường hợp đặc biệt sinh viên làm đơn gởi Ban chủ nhiệm Khoa và
Khoa đề xuất để BGH phê duyệt. Sinh viên không cần đăng ký học lại các
môn học được nhận điểm I trong học kỳ tiếp theo, mà chỉ nộp đơn xin dự thi
xóa điểm I. Trong thời hạn là 1 năm tiếp theo, nếu sinh viên không có đủ
điểm để đánh giá môn học, điểm I tự động được chuyển sang điểm F (điểm
không).
6. Điểm trung bình học kỳ, điểm trung bình tích lũy
6.1 Điểm trung bình học kỳ (ĐTBHK)
• ĐTBHK là điểm trung bình của tất cả các môn học mà sinh viên đã đăng ký
học và được trường xếp lớp trong học kỳ đó.
• Các môn học chưa hoàn tất (điểm I), Miễn học, bảo lưu (WH), chưa có điểm
thi (NA) không tính trong điểm trung bình học kỳ.
• ĐTBHK được làm tròn đến 1 chữ số thập phân.
• ĐTBHK được dùng để xét học bổng, khen thưởng, học vượt, học cùng một
lúc ở nhiều ngành, nhiều trường và xử lý học vụ
6.2 Điểm trung bình tích lũy (ĐTBTL)
ĐTBTL là điểm trung bình có trọng số của tất cả các môn học mà sinh viên đã đăng
ký học và được trường xếp lớp từ lần đăng ký đầu tiên đến thời điểm tính. ĐTBTL
được tính theo thang điểm 100 và được làm tròn đến 1 chữ số thập phân. ĐTBTL
được dùng để xét phân loại kết quả học tập của khóa học, xử lý học vụ, xét tốt
nghiệp.
7. Số tín chỉ tích lũy
Số tín chỉ tích lũy là tổng số tín chỉ của các môn học (kể cả môn học bảo lưu) đã
hoàn tất và đạt điểm môn học ≥ 50 từ lúc bắt đầu khóa học đến thời điểm được tính.
School of Industrial Engineering and Management
158 | P a g e
A3. CÁC DIỆN SINH VIÊN
1. Sinh viên hệ chính quy
Sinh viên hệ chính quy là sinh viên đã hoàn tất các thủ tục nhập học và học chương
trình chính qui theo phương thức tập trung toàn thời gian. Một số trường hợp đặc
biệt cũng sẽ được xem xét để thu nhận vào hệ chính qui tập trung như: sinh viên
đang học ở nước ngoài có nguyện vọng muốn về nước học tiếp, sinh viên các trường
đại học khác ở trong nước (cùng khối thi, cùng nhóm ngành đào tạo) có nguyện
vọng muốn chuyển trường.
2. Sinh viên tạm dừng
2.1 Nếu có lý do chính đáng sinh viên có thể làm đơn xin tạm dừng học tập và phải
nộp đơn tại Phòng Đào tạo. Sinh viên chỉ được phép tạm dừng khi có quyết định cho
phép của Ban Giám hiệu.
2.2 Thời gian tạm dừng do thi hành nghĩa vụ quân sự không tính vào thời gian học
của sinh viên. Thời gian tạm dừng vì các lý do khác phải chịu sự ràng buộc nói trong
Mục 3.1-Điều 2.
2.3 Sinh viên thuộc diện ưu tiên 1, theo qui định của quy chế tuyển sinh đại học, có
tổng thời gian cho phép tạm dừng tối đa là 4 học kỳ chính cho toàn khóa học có thời
gian đào tạo từ 5-6 năm. Tổng thời gian tạm dừng được tính vào quỹ thời gian cho
phép học của khóa học và không được tạm dừng quá 2 học kỳ liên tiếp.
3. Sinh viên
3.1 Tìm hiểu, nghiên cứu để nắm được kế hoạch học tập, chương trình đào tạo, và
những qui định, chế độ của nhà trường. Khi cần thiết, sinh viên nên đến các phòng
chức năng, CVHT, và cán bộ giảng dạy môn học để được hướng dẫn và giúp đỡ.
School of Industrial Engineering and Management
159 | P a g e
3.2 Phải liên hệ với CVHT để được hướng dẫn và thông qua danh sách các môn học
dự kiến chọn trong mỗi học kỳ để thực hiện việc đăng ký học tập theo đúng qui
định.
3.3 Tất cả sinh viên (trừ trường hợp được giải quyết cho tạm dừng hoặc chưa hoàn
thành đầy đủ nghĩa vụ qui định đối với nhà trường) đều phải thực hiện việc đăng ký
học tập theo đúng qui định.
3.4 Khối lượng học tập đăng ký chỉ được coi là chính thức khi đã được nhà trường
chấp thuận và xếp được lớp môn học. Sinh viên có trách nhiệm theo dõi thông báo
về kết quả học tập của học kỳ trước và kết quả đăng ký môn học tại phòng Đào tạo
hoặc Văn phòng Khoa quản ngành.
School of Industrial Engineering and Management
160 | P a g e
A4. ĐĂNG KÝ MÔN HỌC
Việc đăng ký môn học nhằm giúp cho sinh viên chủ động trong việc xây dựng kế
hoạch học tập của mình, lựa chọn các môn học cho từng học kỳ trong toàn khóa học
sao cho phù hợp với năng lực, hoàn cảnh cá nhân nhằm đạt hiệu quả học tập cao
nhất.
• Phải đăng ký tối thiểu 12 tín chỉ cho mỗi học kỳ, trừ học kỳ cuối khóa học
• Chỉ được đăng ký tối đa 24 tín chỉ cho mỗi học kỳ, trừ học kỳ cuối khóa học,
đối với sinh viên có ĐTBTL >= 65.
• Bảng đăng ký môn học phải có sự chấp thuận và phê duyệt của GVCN.
• Các trường hợp đặc biệt, sinh viên phải có đơn và được sự phê duyệt của
lãnh đạo Khoa.
1. Quy trình đăng ký môn học:
Sinh viên năm thứ nhất học theo thời khóa biểu quy định, Phòng Đào tạo phối hợp
với các khoa tổ chức và hướng dẫn cho sinh viên từ năm thứ 2 trở lên đăng ký môn
học theo quy trình đăng ký môn học như sau:
• Trước khi kết thúc học kỳ 1 tháng, Phòng Đào tạo chuyển về cho Khoa: sổ
tay sinh viên, phiếu đăng ký môn học, danh sách sinh viên.
• Khoa thông qua hệ thống giáo viên chủ nhiệm tổ chức phát sổ tay, phiếu
đăng ký môn học (phải có ký nhận) và tư vấn hướng dẫn sinh viên đăng ký
môn học. Giáo viên chủ nhiệm phải tập trung sinh viên lớp mình chủ nhiệm
ít nhất 1 lần để thực hiện công tác này.
• Sau khi hết thời hạn đăng ký môn học (ghi trong sổ tay sinh viên) sinh viên
nộp phiếu đăng ký môn học về cho giáo viên chủ nhiệm, thông qua Khoa
nộp về Phòng Đào tạo theo lịch quy định: phiếu đăng ký môn học của sinh
School of Industrial Engineering and Management
161 | P a g e
viên đã đăng ký có ký xác nhận của giáo viên chủ nhiệm, sổ tay và phiếu
đăng ký môn học dư và danh sách sinh viên ký nhận để lưu giữ đối chiếu khi
cần.
• Chậm nhất là 2 tuần sau khi kết thúc thời hạn đăng ký môn học, Phòng Đào
tạo chuyển đến các Khoa: thời khóa biểu tạm thời của Khoa, giảng viên, của
từng sinh viên. Khoa chuyển thời khóa biểu giảng viên đến cho các giảng
viên và thông qua giáo viên chủ nhiệm chuyển cho sinh viên thời khóa biểu
cũng chính là kết quả đăng ký môn học chính thức của sinh viên (có ký
nhận)
• Sau khi nhận thời khóa biểu mọi sai sót phải được gửi về Phòng Đào tạo
thông qua Khoa trong vòng 1 tuần kể từ ngày Khoa nhận được thời khóa
biểu.
• Sau 1 tuần thực học, sinh viên được đăng ký thêm môn học hoặc hủy môn
học do những lý do khách quan, năng lực học tập (để hạn chế thay đổi này
giáo viên chủ nhiệm cần tư vấn kỹ cho sinh viên để sinh viên đăng ký số
môn học phù hợp khả năng). Sinh viên nộp đơn có ý kiến của giáo viên chủ
nhiệm, phiếu đăng ký môn học có chữ ký xác nhận của giáo viên chủ nhiệm
(trường hợp đăng ký thêm môn học) gửi về khoa.
• Phòng Đào tạo sẽ xử lý các thay đổi về thời khóa biểu trong tuần thực học
thứ 2. Sau đó sẽ trình Ban Giám hiệu ký duyệt và công bố thời khóa biểu
chính thức. Thời khóa biểu chính thức là văn bản chính thức của nhà trường,
là căn cứ để tính khối lượng giảng dạy của giảng viên và khối lượng học tập
của sinh viên, và là cơ sở để thực hiện các hoạt động khác.
• Đối với các trường hợp nộp phiếu đăng ký môn học bị trễ: 3 ngày sau thời
hạn đăng ký môn học quy định, sinh viên nộp phiếu đăng ký môn học và đơn
cho Trưởng Khoa xem xét, có ý kiến chuyển cho Phòng Đào tạo xử lý. Sau
School of Industrial Engineering and Management
162 | P a g e
hơn 3 ngày trễ nhất là 1 tuần sau thời hạn đăng ký môn học quy định sinh
viên nộp trễ có lý do chính đáng nộp đơn kèm theo bằng chứng và phiếu
đăng ký môn học có xác nhận của giáo viên chủ nhiệm nộp trực tiếp cho
Phòng Đào tạo xử lý. Sinh viên phải theo dõi và nhận kết quả xử lý tại nơi đã
nộp đơn.
2. Đăng ký môn học:
- Sinh viên căn cứ vào các thông tin sau đây để đăng ký môn học: quy chế , quy
định về đào tạo, thời khóa biểu dự kiến để biết các thông tin về môn học, thời
khóa biểu từng môn học, lịch đăng ký môn học; kết quả học tập để chọn đăng ký
môn học phù hợp với khả năng.
- Việc đăng ký môn học của sinh viên được xếp theo thứ tự ưu tiên như sau:
• Đăng ký các môn học đúng chương trình của khóa – ngành học.
• Ưu tiên cho trả nợ môn học để kịp tiến độ chuyển tiếp (đối với chương trình
liên kết).
• Đăng ký các môn học học vượt đối với sinh viên khá giỏi.
- Sinh viên cần phải nhận sự tư vấn của giáo viên chủ nhiệm để được tư vấn về kế
hoạch học tập, đăng ký môn học cho phù hợp. Sinh viên phải chịu trách nhiệm
với việc đăng ký môn học của mình không chấp thuận mọi trường hợp chỉnh sửa
do nhờ người khác đăng ký hộ.
- Sau khi cân nhắc và ghi chính xác đầy đủ nội dung yêu cầu của phiếu đăng ký
môn học, sinh viên ký và ghi rõ học tên vào phiếu đăng ký môn học và nộp cho
giáo viên chủ nhiệm, GVCN phải ký duyệt và chịu trách nhiệm liên đới về tính
chính xác, hợp lý của phiếu ĐKMH.
- Quy trình chỉnh sửa thời khóa biểu sinh viên hoặc đăng ký bổ sung
2.1 Chỉnh sửa thời khóa biểu:
School of Industrial Engineering and Management
163 | P a g e
Khi nhận được TKB của mình sinh viên phải kiểm tra các thông tin trên thời khóa
biểu: số môn học đăng ký, học phí v.v.v . . nếu có bất kỳ sai sót nào cần chỉnh sửa,
hoặc khiếu nại về thời khóa biểu sinh viên phải nộp đơn về Khoa trong vòng 3 ngày
kể từ ngày công bố thời khóa biểu. Khoa có nhiệm vụ kiểm tra (thông qua giáo viên
chủ nhiệm) và cho ý kiến xử lý vào đơn của sinh viên, sau đó tổng hợp gửi về Phòng
Đào tạo để xử lý. Phòng Đào tạo sẽ chuyển kết quả xử lý về Khoa để trả lời cho sinh
viên.
2.2 Quy trình đăng ký bổ sung hoặc hủy môn học:
Trong 1 tuần thực học đầu tiên, căn cứ thời khóa biểu, khả năng và điều kiện học tập
sinh viên có thể xin bổ sung hoặc hủy môn học, theo quy định và quy trình như sau:
2.2.1 Quy đinh về việc bổ sung hoặc hủy các môn học:
- Không được hủy các môn học thực hành thí nghiệm, đồ án môn học.
- Không được hủy môn học tiên quyết.
- Được đăng ký thêm môn học chỉ được chấp nhận nếu còn chỗ, hoặc bố trí được
giảng viên hướng dẫn: thực hành, thí nghiệm.
2.2.2 Học cùng lúc hai chương trình:
- Sinh viên học cùng lúc hai chương trình là sinh viên có nhu cầu đăng ký học
thêm một chương trình thứ hai để khi tốt nghiệp được cấp hai văn bằng.
- Điều kiện để học cùng lúc hai chương trình:
• Ngành đào tạo chính ở chương trình thứ hai phải khác ngành đào tạo chính ở
chương trình thứ nhất;
• Sau khi đã kết thúc học kỳ thứ nhất năm học đầu tiên của chương trình thứ
nhất;
• Sinh viên không thuộc diện xếp hạng học lực yếu ở chương trình thứ nhất
School of Industrial Engineering and Management
164 | P a g e
- Sinh viên đang học thêm chương trình thứ hai, nếu rơi vào diện bị xếp hạng học
lực yếu của chương trình thứ hai, phải dừng học thêm chương trình thứ hai ở học
kỳ tiếp theo.
- Thời gian tối đa được phép học đối với sinh viên học cùng lúc hai chương trình
là thời gian tối đa quy định cho chương trình thứ nhất, quy định tại Khoản 3
Điều 2 của Quy chế này. Khi học chương trình thứ hai, sinh viên được bảo lưu
điểm của những môn học có nội dung và khối lượng kiến thức tương đương có
trong hai chương trình và đã được học ở một chương trình.
- Sinh viên chỉ được xét tốt nghiệp chương trình thứ hai, nếu có đủ điều kiện tốt
nghiệp ở chương trình thứ nhất.
2.2.3 Điều kiện chuyển ngành, chuyển chương trình:
- Điều kiện đề chuẩn ngành, chuyển chương trình: Sinh viên được phép xin
chuyển ngành, chương trình học trong khoảng thời gian 4 học kỳ đầu.
- Điều kiện để sinh viên xin chuyển từ chương trình đào tạo do trường Đại Học
Quốc Tế cấp bằng sang chương trình liên kết:
• Nếu sinh viên xin chuyển tại thời điểm học kỳ I năm thứ nhất, nhà trường sẽ
xem xét dựa trên các cơ sở sau đây:
▪ Chỉ tiêu của ngành muốn chuyển đổi phải còn chỉ tiêu.
▪ Điểm trúng tuyển của sinh viên phải ≥ điểm chuẩn của ngành thuộc
chương trình muốn chuyển đổi.
• Nếu sinh viên xin chuyển tại thời điểm sau khi học ít nhất một học kỳ, nhà
trường sẽ dựa trên các cơ sở sau đây:
▪ Chỉ tiêu của ngành muốn chuyển đổi còn phải còn chỉ tiêu.
▪ Sinh viên không bị các hình thức kỷ luật, xử lý học vụ.
School of Industrial Engineering and Management
165 | P a g e
- Điều kiện để sinh viên xin chuyển từ chương trình liên kết do trường Đại học
nước ngoài cấp bằng sang chương trình do trường Đại học Quốc tế cấp bằng:
sinh viên chỉ được xem xét chuyển đổi sau khi đã hoàn tất ít nhất 1 học kỳ, nhà
trường sẽ căn cứ vào các cơ sở sau đây để xem xét trình Đại học Quốc gia quyết
định:
• Chỉ tiêu của ngành muốn chuyển đổi phải còn chỉ tiêu.
• Điểm trúng tuyển của sinh viên phải ≥ điểm chuẩn của ngành thuộc chương
trình muốn chuyển đổi.
2.2.4 Điều kiện để chuyển trường
- Sinh viên được xét chuyển trường nếu có các điều kiện sau đây:
• Trong thời gian học tập, nếu gia đình chuyển nơi cư trú hoặc sinh viên có
hoàn cảnh khó khăn, cần thiết phải chuyển đến trường gần nơi cư trú của gia
đình để thuận lợi trong học tập;
• diện nằm ngoài vùng tuyển quy định của trường xin chuyển đến; Sinh viên
năm thứ nhất và năm cuối khóa;
• Sinh viên đang trong thời gian bị kỷ luật từ cảnh cáo trở lên.
- Thủ tục chuyển trường:
• Sinh viên chuyển trường phải làm hồ sơ xin chuyển trường theo quy định
của nhà trường;
• Hiệu trưởng trường có sinh viên xin chuyển đến quyết định tiếp nhận hoặc
không tiếp nhận; quyết định việc học tập tiếp tục của sinh viên, công nhận
các học môn học mà sinh viên chuyển đến được chuyển đổi kết quả và số
môn học phải học bổ sung, trên cơ sở so sánh chương trình ở trường sinh
viên xin chuyển đi và trường xin chuyển đến.
School of Industrial Engineering and Management
166 | P a g e
A5. ĐÁNH GIÁ VÀ XỬ LÝ KẾT QUẢ HỌC TẬP
Trong buổi lên lớp đầu tiên của môn học, cán bộ giảng dạy phụ trách môn học sẽ
thông báo cho sinh viên biết nội dung tóm tắt của môn học, vị trí môn học trong
CTĐT, cách thức học, và các hình thức được áp dụng để đánh giá kết quả học tập
môn học liên quan (các tiêu chuẩn, phân lượng của các điểm thành phần trong kết
quả đánh giá cuối cùng, số lần kiểm tra trong học kỳ, các điều kiện để được dự thi
cuối học kỳ và những vấn đề liên quan đến kỳ thi cuối học kỳ), lịch thi, kiểm tra và
thí nghiệm.
Kiểm tra thường kỳ và thi kết thúc môn học
1. Điều kiện để được tham dự kiểm tra và thi kết thúc môn học
1.1 Mỗi môn học có thể có nhiều kỳ kiểm tra nhưng chỉ tổ chức một kỳ kiểm tra
chính vào giữa học kỳ và một kỳ thi kết thúc môn học vào cuối học kỳ. Không có kỳ
kiểm tra lại hoặc kỳ thi lại cho những sinh viên đã dự thi không đạt yêu cầu hoặc
vắng thi.
1.2 Điểm để đánh giá kết quả học tập của môn học bao gồm điểm kiểm tra giữa kỳ,
điểm thực hành và bài tập (nếu có) và điểm thi kết thúc môn học.
1.3 Vắng mặt khi lên lớp:
• Sinh viên (SV) vắng mặt quá 20% số giờ trên lớp sẽ bị cấm dự thi cuối học
kỳ, và phải nhận điểm không (0) cho môn học đó.
• Nếu sinh viên vắng mặt (có và không có lý do) quá 20% số giờ thực hành
(bài tập, thí nghiệm, seminar, ...) và 50% số kỳ kiểm tra trong học kỳ sẽ phải
nhận điểm không (0) cho môn học thí nghiệm và cho phần kiểm tra của môn
học đó.
1.4 Sinh viên phải hoàn thành tất cả các bài thí nghiệm và thực tập, tham dự các kỳ
kiểm tra và thi cuối học kỳ.
School of Industrial Engineering and Management
167 | P a g e
• Sinh viên vắng mặt trong các giờ thí nghiệm hay thực tập, đều phải có đơn
kèm theo chứng lý trình bày với cán bộ giảng dạy phụ trách môn học. Thời
hạn phải trình bày muộn nhất là 01 ngày sau ngày vắng mặt (không kể ngày
chủ nhật và lễ). Nếu lý do được công nhận thì sinh viên được xếp cho làm bù
theo sự sắp xếp của giảng viên hướng dẫn thực hành. Nếu sinh viên không
trình bày hoặc lý do vắng mặt không được công nhận thì phải nhận điểm
không (0) cho các buổi đã vắng.
• Sinh viên vắng mặt trong các giờ kiểm tra và thi phải có đơn kèm theo chứng
lý trình bày với Trưởng Khoa quản lý sinh viên, trong thời hạn muộn nhất 01
ngày sau ngày kiểm tra hay thi. Nếu sinh viên không trình bày hoặc lý do
vắng mặt không được công nhận thì phải nhận điểm không (0) cho kỳ kiểm
tra hay thi đã vắng. Chỉ sau khi Trưởng Khoa quản lý sinh viên duyệt đơn và
phòng Đào tạo ra quyết định công nhận thì sinh viên được xem là vắng có lý
do chính đáng, và trong bảng điểm ghi điểm chưa hoàn tất (điểm I).
1.5 Đến trễ giờ kiểm tra, thi: Sinh viên đến trễ giờ thi từ 15 phút trở lên sẽ không
được vào phòng thi và sẽ nhận điểm không (0) đối với môn kiểm tra hoặc môn thi
đó.
1.6 Lịch thi, kiểm tra và thí nghiệm:
• Lịch kiểm tra môn học hoặc lịch thi sẽ được công bố ở Phòng Đào tạo và
Khoa ít nhất 2 tuần trước thời gian thi hoặc kiểm tra.
• Lịch thí nghiệm chung sẽ được công bố cụ thể ở các Phòng thí nghiệm, Văn
phòng Khoa quản lý sinh viên. Sinh viên có nhiệm vụ theo dõi để biết lịch
học vụ của mỗi học kỳ.
School of Industrial Engineering and Management
168 | P a g e
2. Cách tính điểm môn học, điểm trung bình học tập và xếp loại kết quả học tập
Cách tính điểm trung bình học tập: điểm trung bình học tập của mỗi học kỳ, mỗi
năm học, hoặc mỗi khóa học được tính theo công thức sau:
Trong đó: A là điểm trung bình học tập
ai là điểm môn học thứ i
ni là số tín chỉ của môn học thứ i
N là tổng số môn học
2.1 Điểm trung bình học kỳ (xem Mục 6.1 -Điều 2) sau từng học kỳ, từng năm học
được dùng để xét học bổng, khen thưởng, được lấy theo kết quả thi kết thúc môn
học ở lần thi thứ nhất.
2.2 Điểm trung bình chung tích lũy (xem Mục 6.2 -Điều 2) được dùng để xét học
cùng một lúc ở nhiều ngành, phân loại kết quả học tập của khóa học, xét tốt nghiệp,
ngừng học hay thôi học, được tính theo điểm thi cao nhất trong các lần thi.
2.3 ĐTBHK, ĐTBTL được tính theo thang điểm 4 hoặc theo thang điểm 100 và
được làm tròn đến 1 chữ số thập phân.
2.4 Xếp loại sinh viên: ĐTBTL là cơ sở để xếp loại học lực sinh viên theo bảng như
sau:
Xếp loại Thang điểm 100 Thang điểm chữ
Đạt
Xuất sắc 90 <= GPA <= 100 A
Giỏi 80 <= GPA < 90 A-
Khá giỏi 70 <= GPA < 80 B+
School of Industrial Engineering and Management
169 | P a g e
Trung bình khá 60 <= GPA < 70 B
Trung bình 50 <= GPA < 60 C
Không đạt
Yếu 40 <= GPA <= 50 D
Kém GPA < 40 F
2.5 Không tính kết quả thi các môn học Giáo dục quốc phòng vào điểm trung bình
học kỳ, năm học hay khóa học. Việc đánh giá kết quả và điều kiện cấp chứng chỉ đối
với môn học này theo qui định của Bộ Giáo dục và Đào tạo.
3 Thông báo kết quả
3.1 Tất cả các kết quả của các hoạt động học tập đều được thông báo cho sinh viên
tại Văn phòng Khoa quản lý sinh viên đối với các môn học thuộc nhóm ngành và tại
Phòng Đào tạo đối với môn học chung cho toàn trường. Điểm kiểm tra được CBGD
thông báo tại lớp. Các điểm kiểm tra và kết quả học kỳ đối với mỗi môn học đều
phải được CBGD gởi đến Phòng Đào tạo hoặc Khoa, chậm nhất là 15 ngày sau ngày
thi của môn học đó. Thời gian dán thông báo là 5 ngày (không kể ngày lễ và chủ
nhật)
3.2 Mỗi học kỳ, phòng Đào tạo thông báo cho sinh viên kết quả điểm của các môn
học trong học kỳ, ĐTBHK và ĐTBTL tính đến hết học kỳ đó.
3.3 Trong quá trình học, sinh viên có thể đề nghị trường cấp hoặc gởi bảng điểm đến
nơi cần thiết theo yêu cầu của sinh viên. Để thực hiện công việc này, sinh viên phải
làm đơn và nộp lệ phí. Mức lệ phí do trường qui định.
3.4 Đối với sinh viên bị cảnh cáo học vụ và bị buộc thôi học, Trường gửi thư báo
cho gia đình sinh viên. Riêng sinh viên bị buộc thôi học Trường còn gửi thư báo về
địa phương nơi cư trú chậm nhất là 01 tháng sau khi có quyết định buộc thôi học.
School of Industrial Engineering and Management
170 | P a g e
4 Chấm phúc tra
Sinh viên có quyền đề nghị chấm phúc tra kết quả thi. Đơn xin phúc tra kết quả thi,
kiểm tra phải được gởi đến phòng Đào tạo hoặc Khoa trong vòng 1 tuần kể từ ngày
công bố kết quả. Tất cả các đề nghị phúc tra kết quả đều phải đóng lệ phí, mức lệ phí
do trường qui định.
5 Xử lý kỷ luật đối với sinh viên
5.1 Khiển trách áp dụng đối với những sinh viên phạm lỗi một lần: nhìn bài của bạn,
trao đổi với bạn (hình thức này do cán bộ coi thi quyết định tại biên bản được lập).
Sinh viên bị khiển trách trong khi thi môn nào sẽ bị trừ 25% số điểm thi của môn đó.
5.2 Cảnh cáo đối với các sinh viên vi phạm một trong các lỗi sau đây:
• Đã bị khiển trách một lần nhưng trong giờ thi môn đó vẫn tiếp tục vi phạm
Quy chế.
• Mang vào phòng thi vũ khí, chất gây nổ, gây cháy, bia, rượu hoặc các vật
dụng gây nguy hại khác.
• Trao đổi bài làm hoặc giấy nháp cho bạn.
• Chép bài của người khác. Những bài thi đã có kết luận là giống nhau thì xử
lý như nhau. Nếu người bị xử lý có đủ bằng chứng chứng minh mình bị quay
cóp thì trường có thể xem xét giảm từ mức kỷ luật cảnh cáo xuống mức
khiển trách. Người bị kỷ luật cảnh cáo trong khi thi môn nào sẽ bị trừ 50% số
điểm thi của môn đó. Hình thức kỷ luật cảnh cáo do cán bộ coi thi lập biên
bản, thu tang vật và ghi rõ hình thức kỷ luật đã đề nghị trong biên bản.
5.3 Đình chỉ thi đối với các thí sinh vi phạm một trong các lỗi sau đây:
School of Industrial Engineering and Management
171 | P a g e
• Đã bị cảnh cáo một lần nhưng trong giờ thi môn đó vẫn tiếp tục vi phạm Quy
chế.
• Khi vào phòng thi còn mang tài liệu, phương tiện kỹ thuật thu, phát, truyền
tin, ghi âm, ghi hình, thiết bị chứa đựng thông tin có thể lợi dụng để làm bài
thi.
• Đưa đề thi ra ngoài hoặc nhận bài giải từ ngoài vào phòng thi.
• Viết vẽ những nội dung không liên quan đến bài thi.
• Có hành động gây gổ, đe dọa cán bộ có trách nhiệm trong kỳ thi hay đe dọa
sinh viên khác. Hình thức đình chỉ thi do cán bộ coi thi lập biên bản, Điều
hành thi quyết định.
• Sinh viên bị kỷ luật đình chỉ thi trong khi thi môn nào sẽ bị điểm không (0)
môn đó; phải ra khỏi phòng thi ngay sau khi có quyết định của Điều hành thi.
5.4 Đối với sinh viên đi thi hộ hoặc nhờ người thi hộ đều bị kỷ luật ở mức buộc thôi
học.
School of Industrial Engineering and Management
172 | P a g e
Xử lý kết quả học tập:
1. Học lại một môn học
1.1 Nếu sinh viên không đạt yêu cầu đối với một môn học bắt buộc, thì phải đăng ký
học lại môn học đó khi môn học được tổ chức giảng dạy.
1.2 Đối với môn học tự chọn không đạt, sinh viên phải
• Đăng ký học lại môn học đó, hoặc
• Đăng ký học lại môn học khác trong số các môn học qui định của môn học
tự chọn.
2. Cải thiện điểm
Đối với các môn học có kết quả đạt, sinh viên được phép đăng ký học lại để cải
thiện ĐTBCTL nếu có nguyện vọng. Điểm cuối cùng của môn học cải thiện là điểm
cao nhất trong các lần thi. Việc đăng ký học cải thiện điểm phải theo qui định của
trường.
3. Cảnh cáo học vụ
3.1 Hằng năm, Hội đồng học vụ trường sẽ xét xử lý học vụ sau học kỳ 1 và sau học
kỳ hè. Kết quả học tập của học kỳ hè sẽ được nhập vào học kỳ 2 của năm học tương
ứng khi xét xử lý học vụ.
3.2 Sinh viên vi phạm các qui định sau sẽ bị cảnh cáo học vụ:
• Không đạt số tín chỉ tối thiểu quy định trong một học kỳ.
• Có ĐTBTL dưới 35 theo thang điểm 100.
• Có ĐTBTL của 2 học kỳ liên tiếp dưới 50 theo thang điểm 100.
School of Industrial Engineering and Management
173 | P a g e
Thời hạn cảnh cáo học vụ kéo dài trong 1 học kỳ chính tiếp theo. Sinh viên sẽ được
xóa tên trong danh sách cảnh cáo học vụ trước thời hạn, nếu có kết quả học tập ở
cuối học kỳ kế không vi phạm Mục 3.2 của Điều này. Đến cuối thời hạn cảnh cáo
học vụ nếu kết quả học tập của sinh viên vẫn vi phạm Mục 3.2 của Điều này thì sẽ bị
cảnh cáo học vụ lần thứ hai. Khi đến cuối thời hạn cảnh cáo học vụ lần thứ hai nếu
kết quả vẫn rơi vào mục 3.2 thì sẽ bị xử lý theo Mục 4.2 của Điều này.
4. Đình chỉ học tập và xóa tên khỏi danh sách sinh viên
4.1 Trường sẽ xóa tên khỏi danh sách sinh viên nếu sinh viên gửi đơn xin thôi học
và được Trường ra quyết định cho phép nghỉ học.
4.2 Trường sẽ ra quyết định đình chỉ học tập và xóa tên khỏi danh sách sinh viên nếu
sinh viên rơi vào một trong các trường hợp sau:
• Đã hết thời gian tối đa được phép học.
• Đã tự ý bỏ học từ một học kỳ chính trở lên.
• Sau thời hạn bị cảnh cáo học vụ hai lần vẫn vi phạm các qui định tại Mục 3.2
của Điều này.
• Vi phạm quy chế học vụ và các qui định khác của trường theo đến mức buộc
thôi học.
• Không làm thủ tục đăng ký môn học.
• Không đóng học phí theo đúng qui định của trường.
• Không thỏa các điều kiện để được cấp bằng trong khoảng thời gian qui định
của khóa học.
• Đã đăng ký và được trường xếp lớp học, nhưng sinh viên không đến nhận
phiếu kết quả đăng ký môn học (chậm nhất là trong tuần lễ đầu tiên của học
kỳ).
School of Industrial Engineering and Management
174 | P a g e
5. Điều kiện để được học tiếp
Sinh viên không thuộc diện qui định ở Mục 4 của Điều này thì được đăng ký học
tiếp.
6. Chế độ ưu tiên cho việc xét học tiếp, thôi học
Sinh viên thuộc diện ưu tiên 1 và 2 theo Quy chế tuyển sinh đại học được giảm tiêu
chuẩn xét học tiếp và thôi học như sau:
Khu vực 1 Khu vực 2
Ưu tiên 1 Giảm 0.6 điểm Giảm 0.4 điểm
Ưu tiên 2 Giảm 0.4 điểm Giảm 0.2 điểm
Sinh viên thuộc diện ưu tiên 1 được ngừng học để củng cố kiến thức tối đa không
quá hai năm cho toàn khóa học đối với các ngành có thời gian đào tạo từ 3-4 năm,
không quá ba năm cho toàn khóa học đối với các ngành có thời gian đào tạo từ 5-6
năm. Các năm ngừng học này không được kế tiếp nhau.
Điều kiện để nhận đồ án, luận án tốt nghiệp, thi cuối khóa:
Sinh viên không bị cảnh cáo học vụ và các sinh viên đã hoàn số môn học và tín chỉ
đã quy định, không bị nợ môn học.
Điều kiện xét và công nhận tốt nghiệp:
Sinh viên sẽ được công nhận tốt nghiệp nếu hội đủ các điều kiện sau: (tính cho toàn
khoá học)
- Cho đến thời điểm xét tốt nghiệp không bị kỷ luật đình chỉ học tập hoặc
không bị truy cứu hình sự.
School of Industrial Engineering and Management
175 | P a g e
- Đạt tất cả các môn học qui định trong CTĐT cho ngành đào tạo.
- Có các chứng chỉ Giáo dục Quốc phòng.
Sau mỗi học kỳ, Hội đồng xét tốt nghiệp của Khoa và Trường sẽ xem xét để lập ra
danh sách những người đủ điều kiện tốt nghiệp. Dựa trên đề nghị của Hội đồng xét
tốt nghiệp, Hiệu trưởng ra quyết định công nhận tốt nghiệp cho những sinh viên đạt
điều kiện theo qui định.
Mỗi sinh viên tốt nghiệp được Trường cấp cho 01 bằng tốt nghiệp và 01 bảng điểm
tốt nghiệp, trong bảng điểm có ghi lĩnh vực chuyên sâu hoặc chuyên môn phụ nếu
có.
Những sinh viên không đủ điều kiện cấp bằng tốt nghiệp, nhưng hết thời gian tối đa
cho phép học ở trường thì được cấp bảng điểm, chứng nhận kết quả các môn học đã
học trong thời gian theo học tại trường. Ở mỗi phần kiến thức, sinh viên đăng ký và
thi theo qui định của trường.
Kết quả thi viết được công bố chậm nhất là 10 ngày sau khi thi.
Xếp hạng tốt nghiệp:
1. Loại tốt nghiệp được xác định căn cứ vào ĐTBTL của các môn học qui định cho
ngành đào tạo. Cách phân loại được thực hiện theo qui định tại Mục 2.4-Điều 10.
2. Đối với loại giỏi và loại xuất sắc, nếu rơi vào một trong các trường hợp sau thì
loại tốt nghiệp bị giảm một cấp:
• Thời gian học tại trường của sinh viên vượt quá một học kỳ so với tiến độ
quy định đối với khóa học.
• Có số tín chỉ phải thi lại vượt quá 5% so với tổng số tín chỉ qui định cho toàn
khóa học.
• Đã bị kỷ luật trong thời gian học từ mức cảnh cáo ở cấp trường trở lên.
School of Industrial Engineering and Management
176 | P a g e
Thu hồi văn bằng hay chứng chỉ đã cấp:
Các văn bằng chứng chỉ sẽ bị thu hồi trong các trường hợp sau:
• Bị phát hiện có chứng cớ là có sự gian lận trong kỳ thi tuyển sinh và quá
trình học đại học của người được cấp văn bằng hay chứng chỉ.
• Bị phát hiện có chứng cớ là có sự vi phạm “Qui chế văn bằng bậc đại học”
do ĐHQG-HCM ban hành.
Hiệu trưởng sẽ ra quyết định hủy bỏ việc công nhận tốt nghiệp, thu hồi văn bằng
hoặc chứng chỉ trong các trường hợp trên và đương sự sẽ bị xử lý theo luật định.
Chỉnh sửa, bổ sung:
Qua quá trình hoạt động, các điều khoản sẽ được điều chỉnh, bổ sung cho phù hợp
với thực tế. Việc điều chỉnh, bổ sung các điều khoản của quy chế do Hiệu trưởng
quyết định.
HIỆU TRƯỞNG
(đã ký)
School of Industrial Engineering and Management
177 | P a g e
TIÊU CHÍ XÉT HỌC BỔNG KHUYẾN KHÍCH HỌC TẬP TỪ KHÓA 2011
I/ Học kỳ 1 và học kỳ 2
Học bổng của học kỳ đang học được xét trên điểm của học kỳ kế trước (gọi là học
kỳ được dùng xét học bổng).
- Điểm học kỳ 3 được tách riêng với điểm học kỳ 2.
1/ Điều kiện để được xét học bổng
- Sinh viên phải hoàn tất môn AE1 tính đến học kỳ dùng xét học bổng.
- Trong học kỳ được dùng xét học bổng:
+ Số tín chỉ đăng ký > 12 tín chỉ.
+ Điểm tổng kết từng môn học >50 (kể cả môn Giáo dục thể chất, Giáo dục
quốc phòng và các môn không tính điểm trung bình).
+ Điểm trung bình học kỳ >70.
- Không cấp học bổng cho các sinh viên đã có quyết định nghỉ học hoặc đang tạm
dừng ở học kỳ nhận học bổng. Đối với sinh viên xin tạm dừng, nếu sinh viên nhập
học lại đúng quy định thì sẽ được nhận học bổng.
- Trong cùng một học kỳ, sinh viên đã nhận học bổng toàn phần hoặc bán phần sẽ
không được xét học bổng khuyến khích học tập.
- Trong cùng một học kỳ, nếu sinh viên đạt cùng lúc học bổng tuyển sinh và học
bổng khuyến khích học tập thì sinh viên sẽ được nhận loại học bổng có giá trị cao
nhất.
2/ Công thức tính điểm trung bình học bổng
Điểm xét học bổng = điểm trung bình học kỳ X (0.7 + 0.3 X (Tín chỉ tích lũy
học kỳ/ tín chỉ tối đa))
Trong đó:
School of Industrial Engineering and Management
178 | P a g e
+ Tín chỉ tích lũy học kỳ không tính tín chỉ của các môn nhận điểm I, NA, miễn
học, bảo lưu, môn giáo dục thể chất, môn giáo dục Quốc phòng và các môn
không tính điểm trung bình.
+ Tín chỉ tối đa là 24 tín chỉ. Đối với những sinh viên đăng ký nhiều hơn 24 tín
chỉ thì được tính 24 tín chỉ.
3/ Số lần xét nhận học bổng
Đối với sinh viên chương trình không liên kết: mỗi sinh viên chỉ được xét học bổng
tối đa 8 lần theo đúng tiến độ của khóa trúng tuyển, trong đó:
• Một lần xét điểm tuyển sinh.
• Tối đa bảy lần xét điểm học tập ở học kỳ kế trước.
Đối với sinh viên chương trình liên kết: mỗi sinh viên chỉ được xét học bống tối đa
4 lân theo đúng tiến độ của khóa trúng tuyển, trong đó:
• Một lần xét điểm tuyển sinh.
• Tối đa ba lần xét điểm học kỳ kế trước.
(Riêng sinh viên chương trình Auckland chỉ xét toi đa hai lần theo đủng tiến độ
của khóa trúng tuyển).
4/ Chỉ tiêu và giá trị học bổng
- Số suất học bổng: 40 suất phân bổ theo phần trăm tỷ lệ tổng số sinh viên của
từng khoa, ngành, khóa học (không tính cho những sinh viên đã nhận học bổng
toàn phần hoặc bán phần).
- Phần trăm được làm tròn theo quy tắc:
• Nếu số sinh viên của nhóm xét học bổng>100, quy tắc làm tròn được sử
dụng, giá trị > 0.5 làm tròn 1.
* Nếu số sinh viên của nhóm xét học bổng < 100. quy tắc làm tròn trên được
School of Industrial Engineering and Management
179 | P a g e
sứ dụng, giá trị > 0.1 làm tròn 1.
- Giá trị học bổng: 600 USD/suất, học bổng quy đổi sang VNĐ (tỷ giá quy đổi
được nhà trường quy định theo từng học kỳ).
5/ Cách gán loại học bổng cho sinh viên
- Cách chọn sinh viên thuộc học bổng loại nào là lấy theo điểm trung bình xét học
bổng từ cao xuống thấp trong từng nhóm xét học bổng, xét từ nhóm Giỏi xuống
Khá cho đến khi hết chỉ tiêu.
- Vì tính công bằng cho sinh viên:
+ Nếu sinh viên có cùng điểm trung bình xét học bổng với của sinh viên đạt
học bổng loại Giỏi (có điểm trung bình xét học bổng nhỏ nhất) thì cũng sẽ đạt học
bổng loại Giỏi (có thể số % sẽ dôi lên).
+ Nếu sinh viên có cùng điểm trung bình xét học bổng với của sinh viên đạt
học bổng loại Khá (có điểm trung bình xét học bổng nhỏ nhất) thì cũng sẽ đạt học
bổng loại Khá (có thể số % sẽ dôi lên).
II/ Học kỳ 3
1/ Điều kiên để được xét học bổng
- Học bồng xét cho những sinh viên có đăng ký môn học trong học kỳ 3.
- Sinh viên phải hoàn tất môn AE1 tính đến học kỳ dùng xét học bổng.
- Trong học kỳ 3:
+ Số tín chỉ đăng ký > 6 tín chỉ.
+ Điếm tong kết từng môn học > 50 (kể cả môn Giáo dục thể chất, Giáo dục
quốc phòng và các môn không tính điểm trung bình).
+ Sinh viên phải có GPA > 70.
- Không cấp học bổng cho các sinh viên đã có quyết định nghỉ học hoặc đang tạm
School of Industrial Engineering and Management
180 | P a g e
dừng ở học kỳ nhận học bổng. Đối với sinh viên xin tạm dừng, nếu sinh viên nhập
học lại đúng quy định thì sẽ được nhận học bổng.
2/ Công thức tính điểm trung bình học bổng
- Tương tự như học kỳ 1 và học kỳ 2.
- Tín chỉ đăng ký tối đa là 12 tín chỉ, sinh viên đăng ký nhiều hơn 12 tín chỉ được
tính như 12 tín chỉ.
3/ Số lần xét nhận học bổng
Theo đúng tiến độ của khóa trúng tuyển:
- Đối với sinh viên chương trình không liên kết: mỗi sinh viên chỉ được xét học
bổng học kỳ 3 tối đa 3 lần.
- Đối với sinh viên chương trình liên kết: mỗi sinh viên chỉ được xét học bổng học
kỳ 3 tối đa 1 lần.
4/ Chỉ tiêu và giá trị học bổng
- Số suất học bổng: 20 suất phân bổ theo phần trăm tỷ lệ tổng số sinh viên đăng ký
môn học trong học kỳ 3, của từng khoa, ngành, khóa học.
Phần trăm được làm tròn theo quy tắc:
• Nếu số sinh viên của nhóm xét học bổng > 100, quy tắc làm tròn được sử
dụng, giá trị > 0.5 làm tròn 1.
• Nếu số sinh viên của nhóm xét học bổng < 100, quy tắc làm tròn trên được sử
dụng, giá trị > 0 . 1 làm tròn 1.
- Giá trị học bổng: 300 USD/suất, học bổng quy đổi sang VNĐ (tỷ giá quy đổi
được nhà trường quy định theo từng học kỳ).
5/ Cách gán loại học bổng cho sinh viên
Tương tự như học kỳ 1 và học kỳ 2.
School of Industrial Engineering and Management
181 | P a g e
A6. CÁC FORM MẪU CẦN THIẾT
Đường link cung cấp các forms mẫu cần thiết trong suốt quá trình học tập tại IU:
http://ise.hcmiu.edu.vn/category/forms/ .