science safety guidebook

24
1 Science Safety Guidebook Jennifer L Baron Hawaii Pacific University ED 6450: Science Curriculum and Instruction April 30, 2007

Upload: jennifer-baron

Post on 01-Dec-2014

310 views

Category:

Education


2 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Science Safety Guidebook

1

Science Safety Guidebook

Jennifer L Baron

Hawaii Pacific University

ED 6450: Science Curriculum and Instruction

April 30, 2007

Page 2: Science Safety Guidebook

2

Page 3: Science Safety Guidebook

3

To the reader and laboratory user: This safety guide book has been created to help inform students and other science laboratory users of the procedures they must follow to create a safe environment. Included are steps on handling various materials, treatment of animals, proper disposal of wastes, how to avoid incidents and emergency action plans, and other various steps of action that should be taken and followed seriously. The science laboratory is a place for students and users to learn and these important procedures, policies, and information is for anyone’s benefit to be not only a better laboratory user but a safer laboratory user. Be safe and enjoy your discoveries in the lab! Jennifer L. Baron April 2007

Page 4: Science Safety Guidebook

4

Table of Contents

Letter to the laboratory user………………………………………….…...3 Chapter 1: Following Procedures and Safety Steps……………….....5 Chapter 2: Student Conduct in Lab……………………………………...7 Chapter 3: Arriving and Leaving the Laboratory……………………...9 Chapter 4: During the Laboratory……………………………………....10 Chapter 5: Handling Equipment………………………………………....11 Chapter 6: Using Laboratory Equipment………………………………12 Chapter 7: Handling Materials and Spills……………………………...13 Chapter 8: Labeling, Storing, and Disposing Chemicals……………15 Chapter 9: Handling Animals………………………………………..…...16 Chapter 10: Working with Plants………………………………………...17 Chapter 11: Working with Body Fluids, Bacteria, and DNA………...18 Chapter 12: Know the Laboratory Classroom…………………………19 Chapter 13: Emergency Actions, When to Call 911…………………..20 Chapter 14: Attendance and Make-up Work Policy…………………..21 References…………………………………………………………………...22 Student Contract……………………………………………………………23 Notes………………………………………………………………………….24

Page 5: Science Safety Guidebook

5

Chapter 1: Following Procedures and Safety Steps (Laboratory users and students are referred to each other either way). Following Laboratory Procedures For every lab activity conducted in class, there will be step by step procedures on how that lab should be performed. Following these steps is crucial for not only a successful completion of an experiment but for safety as well. Procedural guidelines are given because they are the proper way of doing something. Any skipping of a step, multiple steps, or partial completion of steps could pose a hazard in the laboratory area. Please follow any steps given by the instructor. Any failure to do so could cause unexpected results and any unnecessary harm to yourself or other students in the classroom. If a laboratory user is caught not following procedures, they will be removed from the laboratory and will not be able participate in further experiments. Following Safety Guidelines Safety steps are important for every laboratory user to follow. Following these steps (in later chapters of this guidebook) is important for preventing any injuries and being able to help others in case of an emergency. If a laboratory user is caught not following safety guidelines, or is creating an unsafe environment for others, they will be removed from the laboratory and will not be able to participate in further experiments. Further action besides dismissal can be taken depending on the severity of the actions conducted by the laboratory user.

Always perform only the experiments assigned in class. Do not do any unauthorized experiments. Again, laboratory user will be removed from class. Restricted Areas Laboratory users are not allowed in the following areas: Teacher’s Office, Supply Room, and any other Laboratory Storage in the classroom. If a student is found in these areas without supervision of the Instructor, the student will receive detention and removal from the next lab activity.

Page 6: Science Safety Guidebook

6

Students may accompany the instructor in these areas only if the instructor allows it. Laboratory Property Students should respect and use laboratory equipment for the use it is intended for. Any misuse could cause the equipment to become damaged, break, and become unusable. Laboratory equipment should be used for lab experiments and activities only. Any destruction or improper usage will result in removal from the laboratory and students will be issued fines based on any damage caused. Laboratory materials should not be removed from the lab. If any materials are taken, it will be considered theft and charges will be issued as well as any detentions, suspensions, expulsions, and fines for the severity of any item(s) taken.

Page 7: Science Safety Guidebook

7

Chapter 2: Student Conduct in Lab Behavior Students should conduct themselves in a professional manner at all times. Horseplay and other rough housing are not allowed and will not be tolerated. Students are to wait for instructions and procedures from the instructor before touching or beginning any experiment. If lab instructions are given before the lab, students still must wait for instructor to give permission to begin their lab. Students should read over all procedures and instructions before beginning any lab. Failure to do so could cause students to make a mistake in the experiment. Students should always ask if they have a question or concern, not matter how small a detail it could be. Language Students must use appropriate language (no swearing) in the laboratory. Not only must language be clean, but students should try and use scientific vocabulary throughout the lab so they become more familiar with the terminology.

Clothing Students are required to wear covered shoes (closed toed and closed healed shoes). Flip-flops, high heels, or platform shoes are not allowed. It is important to have the whole foot covered so nothing can hurt the toes, heals, or get caught underneath the foot. Students should avoid wearing loose and baggy clothing. This is a hazard when working around Bunsen burners and other lab equipment. These things could catch on to things and knock them down causing chemical splits, fires, unintended mixtures, and skin or eye irritation. Students with long hair should have it tied back in a hair band or rubber band.

Page 8: Science Safety Guidebook

8

Goggles, Lab Coats, and Aprons All students are required to wear lab goggles or lab glasses at all time. They may only be removed after all experiments have been completed and all experimental equipment has been put away. Lab coats and aprons are available and will be required for most labs. It is highly recommended that students use these if they wish to preserve any clothing that could be ruined if there is an accidental spill. Food and Drink There is absolutely no food allowed in the laboratory or classroom. No exceptions. If students need to eat or drink something, please do so before and after class. If a student has a health reason and needs to eat or drink something, they may step outside of the laboratory for a brief moment and have a drink and snack. Students are required to wash their hands when leaving and entering the laboratory. Bathroom Bathroom use should be done before and after class. Students are discouraged from using the bathroom during the lab because most labs will be done in groups, it would be beneficial if all students can remain in the laboratory so they don’t miss any steps or other students will have to do more work. If a student has to use the bathroom during class, they will be permitted to go. (Try not to make frequent occurrences).

Page 9: Science Safety Guidebook

9

Chapter 3: Arriving and Leaving the Laboratory Arrival Students should arrive and take their seats and read over any lab instructions. Labs will begin with a short lecture on the lab instructions and procedures. Students should take notes and ask questions before beginning the lab activity. After the lecture, students are required to wash their hands, put on safety goggles and gloves (if necessary). Students should wash down their lab table before beginning. Lab materials may be gathered. Leaving Before leaving the laboratory, students should put away any materials taken out for the activity. Lab tables should be washed down again. Students are required to wash their hands again before leaving the classroom. This will prevent any accidental tasting, touching of the face and eyes (causing potential irritations), and any transfer to other students or surfaces that could cause a reaction. After hands are washed, students may remove and put away goggles. Students may have to return to their seats after an activity. Students should try and clean up in a timely manner, and be seated to wait for any last minute announcements or lecture time. Students will be dismissed by the instructor and not the school bell. After finishing work in the lab, it should be just as clean as it was before the beginning of the lab. Any failure or frequent improper cleans will cause the entire class to not participate in any lab experiments or activities.

Page 10: Science Safety Guidebook

10

Chapter 4: During the Laboratory During During the lab activity, all students should be contributing to help their group. Every student should trade off or take turns with lab procedures and skills (i.e. using the pipettes, mixtures, reading measurements, lighting the Bunsen burner, etc). All students should be taking notes, recording data, or writing in their laboratory notebooks during the lab. If a mistake is made students should just cross out the mistake and put in the correct information. Lab notes and lab notebook should be written in pencil. DO NOT ERASE any notes, errors, or mistakes. All observations should be recorded (note any physical and chemical changes seen, smells, exothermic and endothermic reaction). Students should work productively, because certain experiments must be completed before the end of the lab period. There will be rare occasions when there is a lab activity or experiment that lasts for a few class periods (over a period of a few days). Students should take safety in the lab seriously (that is what this guide is for… to refer to so you know what to do).

Page 11: Science Safety Guidebook

11

Chapter 5: Handling Equipment Inspecting Equipment Equipment should be inspected and looked over before beginning any experiment. This precaution should be taken to see if the equipment is safe to use and will not cause any harm to its users. Any thing that has a crack, piece missing, or anything questionable should be reported and taken to the instructor. Glass should never be used if it is cracked or broken! It is very unsafe! Students should also inspect Bunsen burner hoses and their connections before use as well. Do not use a Bunsen burner if its hose is broken or the opening is not functioning. Handling and Carrying Equipment Different equipment has different ways of handling and carrying. The instructor will go over more specifically on how to handle certain equipment throughout the year when new equipment is introduced. Some basic things are: For handling a microscope, pick up and remove from lab bench with both hands. Use both hands and lift up off of the table to move it closer towards the user or when moving it to a different part of the laboratory. Never drag a microscope on a surface. Test tubes should be carried vertically and away from the body. Never look into a test tube while mixing, heating, or cooling. Always handle hot test tubes with a test tube holder or tongs. Knifes, scalpels and other sharp objects should be pointed down and away from the body when carrying. For beakers or test tubes that need to be in the fume hood, carefully walk them over and place them in the fume hood and shut the hood. Never stick your head or arms in the fume hood. If something needs to be in the fume hood, it is not a good idea to smell any fumes that the object may be giving off.

Page 12: Science Safety Guidebook

12

Chapter 6: Using Laboratory Equipment Please use laboratory equipment for its intended use. This has been mentioned in a previous chapter and is very important. Don’t try and cut corners, it could be dangerous to yourself and others in the laboratory. Make sure before conducting an experiment of lab activity, that your lab group has all of the required materials and supplies (this saves time for frequent trips to pick up materials). New laboratory equipment will be introduced throughout the year, please pay attention to the procedures for use and the care needed to use the equipment.

Page 13: Science Safety Guidebook

13

Chapter 7: Handling Materials and Spills Mixing Chemicals, Other Materials Mixing and combining chemicals and other materials is forbidden unless instructed to do so by the instructor or lab instructions. Mixing of materials must be done so in a slow and delicate matter. If a student in not taking care in the pour of, mixing of, or is improperly handling any chemicals and other hazardous materials in anyway, they will be removed from the laboratory. Because proper handling is an important skill, if a student is removed for the reasons stated above, the student must pass a skills test on pouring and handling (with water) so these skills and safety is stressed upon and the proper handling of material by the student improves. When using eye droppers or pipettes to draw liquids, use caution when placing the eye dropper or pipette into containers (make sure it is going into the same container the whole time). If there is an accidental switch or use in another vial, let the instructor know right away so they can provide new uncontaminated materials. ONLY USE WHAT YOU WILL NEED, DON’T WASTE SUPPLIES Spills In case of a chemical spill, sodium bicarbonate/baking soda should be used to neutralize acids and vinegar should be used to neutralize bases. All spills and clean-ups need to be reported to the instructor. Avoid breathing in any vapors. If chemicals are spilled on the skin, flush the area with cold water for 5 minutes or longer. If chemicals are spilled on clothing, water down the clothing and remove (cut or take off) the clothing to prevent contact with the skin. If skin does become burned from the acid spill, put sodium hydrogen carbonate paste on the affected area and seek medical help. If skin becomes burned by a base, swab the affected area with vinegar and seek medical help.

Page 14: Science Safety Guidebook

14

DO NOT COVER CHEMICAL BURNS IN BANDAGES Chemicals in the Eyes If chemicals are splashed into the eyes, someone needs to call 911 and notify any other lab personnel, school nurse, and school administrator. Eyes should be flushed out immediately with water or at an eye wash station. Try and hold the eye lids open, if you can’t, have someone help you. Flush out eyes for at least 15 minutes or until medical/emergency help has arrived. Let the water wash any contact lenses away. If they are stuck to the eye, let a professional remove them. DO NOT TRY AND REMOVE CONTACTS FROM YOUR EYES Touching, Tasting, Smelling and Looking All chemicals should be treated as harmful and dangerous. Gloves should be worn whenever you work with chemicals (no exceptions). Never taste a chemical or swallow a chemical, this is dangerous and could be deadly. For smelling any odors that a chemical reaction may release, do not stick the test tube right under or into your nostril and inhale. The proper way to smell an odor is to hold the test tube about 18inches away from your face, and take one hand and waft the odor towards yourself. Eye goggles should always be worn when handling chemicals. When mixing chemicals or materials together, do not look directly over the test tube or beaker, sometimes there can be some matter that can splash out of them. Refer to the section in this chapter called Chemicals in the Eyes on how to handle chemicals getting into the eyes.

Page 15: Science Safety Guidebook

15

Chapter 8: Labeling, Storing, and Disposing Chemicals Labeling Labels on all chemical bottles will be clearly marked. They should not be removed from the bottles or altered in anyway. The name of the chemical, the strength, and the date (when received from the supplier) will always be marked on the label. Storing Chemicals will be stored in a laboratory storage room. Acids will be stored in corrosive cabinets, solvents in flammable cabinets. Acids are to be kept separate from bases. Chemicals should be stored on wooden shelves (with no metal supports, any spills could corrode the metal). Disposal Do not dump chemicals down the drain, unless informed to do so by the instructor of the lab instructions. Dump all chemicals and mixtures in a specified container in the fume hood. Never dump any chemical liquids or solid materials into the trash cans. There could be a reaction and cause a fire to start.

Page 16: Science Safety Guidebook

16

Chapter 9: Handing Animals Handing and Treatment Students are required to handle animals (dead or alive) in an appropriate, humane, non-teasing manner. Animals should be treated with care, just like delicate lab equipment. Any failure to handle animals safely and humanely will result in removal from the lab (and possibly being banned from future lab activities with animal use). Being able to work with animals are important for research and laboratory activities, please be professional in handling any animal. Allergies If students have any allergies or bad reactions to animals, they are required to notify the instructor at the beginning of the school year. The instructor will keep any notes about allergies on file and will obviously not force or require a student to work with an animal that they may have a reaction to. All student records and medical information will be kept confidential. Other Alternatives If students in general feel uncomfortable working with, holding, or dissecting animals, they will not be forced to do so. Another supplemental activity will be assigned so that the student may learn the material in a different way.

Page 17: Science Safety Guidebook

17

Chapter 10: Working with Plants Prior to Working with Plants Prior to beginning any labs or labs that require working with plants, students should inform the instructor of any allergies caused by plants. Students should not bring in their own plants to experiment with. The instructor will provide any plants and materials required for the activities. The instructor will never conduct lab experiments or activities with plants that may cause a poisonous reactions or cause allergic reactions. Working with Plants When using plants, do not burn them (which may cause a release of oils), don’t eat or put anything in your mouth unless instructed to do so, wear gloves when handling plants, and wash hands after using plants (even though gloves were worn).

Page 18: Science Safety Guidebook

18

Chapter 11: Working with Body Fluids, Bacteria, and DNA Working with body fluids needs to be taken very seriously and carried out carefully. If there is a spill of body fluids, pathogenic bacteria, or DNA spills, gloves are required to be worn during cleanup. To clean up any spills , a diluted disinfectant should be used. Use the following if they are available: 5% Lysol, Zephiran, Wescodyne, or similar Or 10% Clorox bleach solution These disinfectants or solutions should be poured over the contaminated area and wiped up with paper towels in towards itself (prevent from spreading out further). After spill is cleaned up, paper towels must be disposed of in biohazard containers or bags. Any glassware should be sterilized using an autoclave (about 30 minutes at 15 p.s.i., temperature should be above 248 degrees Fahrenheit) The experiments with uses of bodily fluids, pathogenic bacteria, and DNA samples are considered safe and not a threat, but proper care in handling and disposal of needs to be taken seriously as if it were dangerous and/or hazardous.

Page 19: Science Safety Guidebook

19

Chapter 12: Know the Laboratory Classroom Safety Equipment and Lab Material Locations Prior to any lab activity or instruction, the instructor will go over locations of safety equipment. Students should record this in their laboratory notebooks on the locations of items such as:

• Master Shut-Off Valves or Switches • Fire Extinguishers • Eye Wash Station • Body Shower • Fume Hood • Bucket of sand (to extinguish alkali metal fires) • Safety Goggles • Sanitizing Equipment • Aprons • Broken Glass Disposal Container • Clean-up kits for chemical spills, bodily fluids, pathogenic bacteria,

DNA, and mercury • First Aid Kit • Safety Posters • Emergency Procedures and Telephone Numbers list • Fire Alarm • Telephone • Location of another lab technician

Page 20: Science Safety Guidebook

20

Chapter 13: Emergency Actions, When to Call 911 When to Call There are several things that could go wrong in a laboratory setting that could harm, injure, or cause serious life threatening problems to its users. Knowing how to handle an emergency is crucial and important to help those who need emergency assistance. All incidents (no matter how minor) must be reported to the instructor or laboratory staff. All incidents must be documented. The following are the circumstances that require a call to 911:

• Chemical spill on a person(s) • Chemicals in someone’s eyes • Fire (whether it is equipment that is on fire that cannot be controlled

or a person is on fire) • People are experiencing dizziness or nausea • Someone is having an allergic reaction • Someone is bitten or scratched by an animal • If someone has to use the shower

Information to Know When calling 911, inform the operator of:

• The accident you are reporting • Address of the school • Lab room number • Directions on how to find the room • Information about the person(s) requiring assistance

While someone is calling 911, someone should run to the school office to inform office staff/administrators of the situation and that medical help has been contacted and will be arriving at the school.

Page 21: Science Safety Guidebook

21

Chapter 14: Attendance and Make-up Work Policy Since supplies and time is limited, lab experiments and activities can only be carried out on the day that they are scheduled to be conducted. Labs cannot be made up. Attendance/Participation is very crucial part of the grade in the class. If a lab is missed, and a student has an excused absence then that lab activity will be excused. The student however, is responsible for obtaining any lab notes and results from lab partners and to discuss anything that was gone over. If a lab is missed, and a student has an unexcused absence then that lab activity will be graded as a zero. The student is still responsible for obtaining any lab notes and result. To make-up for this “zero,” the student can earn credit for doing other work. Options will be presented at time when a student has an unexcused absence.

Page 22: Science Safety Guidebook

22

References Material from this Science Safety Guide was completed and produced from memory of personal laboratory experiences. Help with more specific details and ideas were obtained from the following sources: Council of State Science Supervisors. Science and Safety: Making a

Connection. Flinn Scientific. www.flinnsci.com Hawaii Pacific University. Science Safety Laboratory Guidelines (revised

2002). More guidelines and information will be given throughout the school year, use this space to add any addition resources that are given to be referred to or specific information handouts that can be stapled to the back of this booklet:

Page 23: Science Safety Guidebook

23

Student Contract I have read the following pages and am aware of the importance of science safety and how laboratory behavior must be. I am also aware that more guidelines, procedures and rules can be added at anytime and that I must follow them as well. I also know my parents can be contacted in regards to any misbehavior in the lab. Student Name Printed: _________________________________ Student Name Signature: _______________________________ Date Signed:_________________________________________ I have gone over the following safety rules of the science classroom with my son/daughter. I am aware that if they do not follow lab procedures and policies that they could be removed from the classroom and will not receive a grade for that particular lab. I also realize that my child may not be able to return to the laboratory based on the severity of their actions. Parent Name Printed: __________________________________ Parent Name Signature: ________________________________ Date Signed: _________________________________________ Phone Number: _______________________________________ Email:_______________________________________________

Page 24: Science Safety Guidebook

24

Notes