Scientific Data Systems, Inc. Product Guide

16840 Clay Road, Suite 105 Houston Texas 77084, USA Phone 281.550.1109 Fax 281.550.2068 E-Mail: sds.info@warriorsystem.com Website www.warriorsystem.com

Cased Hole Logging System The Warrior Well Logging System employs advanced software and widely available hardware to provide a cost-effective solution to well logging requirements for both open and cased hole applications. Its main features include: Multitasking System Using Microsoft Windows 2000, XP, Vista, and Windows 7. The real time logging operation may be conducted at the same time as other tasks, such as data/fax transmission, plotting, log heading, job ticket preparation etc. The use of MS Windows ensures longevity, future enhancement and extensive hardware support for the system. Graphical User Interface The system is easy to use and the interface conforms to the popular MS Windows standard. Data monitoring is available in windows, which may be resized and repositioned as the user wishes. A typical user screen with scrolling log display and data monitors is shown below.

In example shown above, the operator is able to monitor the real time scrolling log, view any or all of the acoustic signals generated by a bond tool, and also monitor all the log outputs, including depth and line speed. Optionally raw sensor data may be displayed. Multiple log plot windows may be opened for comparison of, for example, main and repeat log sections. Log plots may be paused and scrolled to any depth and annotations added, while data acquisition continues. Depth correlation is achieved while logging, with the screen plot and system depth updated until correct depth is attained. Log curve scales and other presentation parameters may be adjusted while logging and the screen plot redrawn until the desired output is obtained. The hardcopy plotter may be stopped and started at any time, presenting any interval with any desired presentation format. The tool interface connects to the computer through the industry standard Universal Serial Bus (USB). The performance of the systems may be upgraded easily, as more powerful CPUs and other components become available. Configurations are available for rack mount, or notebook and other portable computers.

The Warrior Well Logging System consists of a tool

interface and power supply panel, a computer, a printer and optional depth, line speed, line weight panel, and perforating power supply. The software supports most cased hole logging tools from a wide selection of tool manufacturers. The tool interface panel contains the necessary circuits to interface to most cased hole tools, both analog and digital. The depth encoder and line weight interfaces are built into the panel, as is the down hole tool power supply. All functions are digitally controlled from the software, with the power supply having a manual control mode. The panel incorporates data acquisition functions primarily DSP based, that interface to the host computer through the industry standard Universal Serial Bus (USB). A seven port USB hub is also incorporated inside the panel allowing a single cable connection to the host computer. The computer can be almost any machine running Windows 2000, XP, Vista, and Windows 7 with a USB port, i.e. rack mount or notebook computers may be used. A second monitor may be attached to provide a hoistman's or client's display. The system supports most thermal well log plotters and a selection of color printers. An optional depth, line speed and line weight panel is available. This panel provides 12 VDC powered, independent depth measurement. It connects to the host computer through the USB and can be synchronized from the host depth or the host depth may be read from the depth panel. An optional perforating power supply is available. The software provides all the usual well logging functions and supports tools from a wide selection of manufacturers.

Standard Cased Hole Panel CPF A compact tool interface and power supply which is a suitable interface for the most downhole tools. It uses the latest Digital Signal Processing (DSP) technology to minimize hardware complexity and maximize flexibility. The interface may be configured for open and / or cased hole services, and incorporates expansion slots for future developments and upgrades. Faceplate dimensions are 19” by 7”. Chassis is 17” by 17” by 7”, cable connections require another 2 to 3 inches of rack depth. The approximate weight of the panel is 45 pounds.

Standard Cased Hole Panel CPF - Rear of Panel

The rear of the standard interface panel is shown below. The encoder connection is a 7 pin Amphenol

connector with a fused encoder power. The 5 pin pressure transducer is wired for a 4-20ma input, but modifications can be done to accept a 0-10 VDC input. The panel is available in 120 VAC or 220VAC , 50-60Hz configurations. Shown are the 5 USB ports from the internal USB hub with strain relief clamp for the USB input from the computer. The passive CCL from an external shooting panel is brought into BNC CCL jack. The line connection can be made to either a BNC or a RG-59 UHF connector. There are two 4-20ma 5 pin connecters that can be used for well head pressure or grease pump pressure. There is a DB-25 connector with connections for up to 5 ADC inputs and 2 TTL counter channel inputs.

PPAB Pulse Interface Panel

The Pulse Interface panel is intended for use where all the capabilities of the Standard Interface Panel are not required. It is compatible with most pulse based logging tools. There are standard depth and 4-20ma tension inputs. As well as an audio output, ten auxiliary analog inputs and two auxiliary counter inputs. The panels tool power supply is capable of delivering positive or negative 250v.

DTLS Depth Tension Line Speed Panel

The Depth, Line Speed and Line Tension Panel uses three industrial process meters to provide simultaneous digital readouts. Meter 1 is setup in a counting mode and can accommodate virtually any depth encoder resolution. Meter 2 is setup in a rate \ counter indicator mode and runs from the same encoder signals as Meter 1. It can display either depth or line speed. Meter 3 senses a 4 - 20 ma signal from a pressure transducer connected to the measuring head weight indicator system, to display line tension.

The panel is intended to be powered by a 12 volt battery with no AC Input and contains DC-DC conveters providing regulated 12.0 volts and 5.0 volts for indicator and encoder power. The panel also provides 24 volts excitation for the pressure transducer. The encoder pulses are buffered and output to the rear connectors for input to the logging system and are also converted to depth and direction signals and routed to the depth and line speed meters. A retransmitted 4 - 20 ma signal is also available at the rear panel for input into the logging system. The depth and alarm signals can be set manually or from the logging system via the USB connection. The faceplate dimensions are 19” by 3.5”. The chassis is 17” by 3.5” by 8.25” deep, but allow 3” of additional rack depth for panel connections. The panel weight is 10 pounds.

Dual Depth Panel USB The Depth, Line Speed Panel uses two industrial process meters to provide simultaneous digital readouts Meter 1 is setup in a counting mode and can accommodate virtually any depth encoder resolution. Meter 2 is setup in a rate\counter indicator mode and runs from the same encoder signals as Meter 1, it can display either depth or line speed. The panel is intended to be powered by a 12 volt battery and contains power supply providing regulated 12.0 volts and 5.0 volts for indicator and encoder power. The encoder pulses are converted to depth and direction signals and routed to the depth and line speed meters and are also buffered and output to the rear panel connectors for input to the logging system. The depth and alarms can be set manually or from the logging system via the USB connection.

Dual Depth Panel

SLAB Slick Line Acquisition Box

The SLAB box provides CCL, depth, line tension, surface pressure and strain gauge inputs in the standard configuration. There are also four optional analog and counter inputs which makes this panel ideal for use with slick line and memory logging.

Wireless Surface Data Acquisition System

WSDAS is a real time Wireless Surface Data Acquisition System. WSDAS can be used with downhole electronic instruments to provide down and up hole sensors data monitoring. WSDAS wireless I/O network can operate in extreme environments while eliminating the need for costly wire runs. A basic network consists of a Gateway system controller and one or more Nodes that monitor and/or control I/O in remote locations. Bi-directional communication between the Nodes and Gateway ensure easily deployed throughout an area. Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple Access (TDMA) control architecture combine to ensure reliable data delivery. Power options allow battery and/or solar power sources. 2.4 GHz accommodates worldwide communication standards and rugged IP67/NEMA 6, FCC, CSA, and ATEX certifications.

Wireless Gateway Box Surface Data Acquisition System

Specifications Range 2.4 GHz: Up to 3.2 kilometers (2 miles)* Transmit Power 2.4 GHz: 18 dBm conducted, less than or equal to 20 dBm EIRP 2.4 GHz Compliance FCC ID UE300DX80-2400 - This device complies with FCC Part 15, Subpart C, 15.247 ETSI/EN: In accordance with EN 300 328: V1.7.1 (2006-05) IC: 7044A-DX8024 Spread Spectrum Technology FHSS (Frequency Hopping Spread Spectrum * With the standard 2 dB antenna. High-gain antennas are available, but the range depends on the environment and line of sight. To determine the range of your wireless network, perform a Site Survey. Modbus/TCP and EtherNet/IP 4-wire Industrial Ethernet 10/100 Mbps, full or half duplex, auto sensing Environmental Rating IEC IP67; NEMA 6 Operating Temperature −40 to +85° C (Electronics); −20 to +80° C (LCD) Operating Humidity 95% max. relative (non-condensing) Radiated Immunity 10 V/m, 80-2700 MHz (EN61000-6-2) Shock and Vibration

Systems mounted in portable racks

This example shows a PIP panel and Printrex Plotter mounted in a 8u portable rack. There is a 1u interface which brings all the necessary connections to the front of the panel for easy interface with the wireline, surface tension and logging system. A full range of sizes and configurations are available to meet your particular needs.

Available for Resale

The Probe Shooting Panel The shooting panel fires resistive as well as Smart Detonators. With built in safety features to ‘safe the line’ and provide shooting voltages for downwhole detonators. The panel also has a built-in Shooting CCL meter and buffered Shooting CCL output to interface with the logging system.

Available options 035-WAR00-0009 Filter Board Assembly: Will filter DC firing voltage and provide proper firing voltage for Smart Detectors or firing through downhole tractors 016-1000-1000 0-1 AMP AC Meter : Needle on current meter will respond when detonator is activated 003-00000-5022 USB Card – for connecting the Warrior™ Logging System. (Version 7.0) Voltage, current and mode select position are all displayed on Warrior computer screen. Enables data logging of events. 010-00000-8531 Dump Button: For select firing with smart detonators. Requires signing of liability agreement

http://www.probe1.com

Probe Shooting Panel 19” X 3 ½”

The V8.5e offers high throughput, field proven architecture, unsurpassed grayscale, ease-of-use and superb quality making it unmatched in the mobile class. The only consumable you need for the V8.5e is paper. http://www.isys-group.com/

iSys V 8 . 5e

Printrex 843 DL/G The 843 DL/G offer 300 x 300 dots per inch plot density resulting in a 225% increase in areal density producing plots with unparalleled image quality at up to 4 inches per second plot speeds. The 843 has both USB and Ethernet interfaces for easy connection to your PC. http://www.printrex.com

Plotters

Printrex Plotter 19 X 4 ½ X 12.4 inches deep 18 lbs.

iSys v8.5e 19 x 3 ½ X 12 ½ inches deep 23 lbs.

Rack mount Computers and Laptops Systel 4230 19” X 19” x 3.5”

Corvalent 2U 19” X 14” x 3.5”

Dell Latitude Laptop

• Designed to meet MIL-STD-810F Shock and Vibration

14.0" HD(1366x768) 4.0GB, DDR3-1333MHz Wireless™ 802.11b/g/n Half Mini Card 8X DVD Recorder

UPS Power Supplies

Tripp-Lite UPS

19 X 3 ½ X 13 ½ deep 41 ½ lbs.

Miscellaneous Computer Accessories

1U and 2U laptop Drawers

19 inch rack mount Monitors

Accessories

Depth encoders and custom cables are available including the industry standard H20 series encoder with a .37 inch sealed shaft 120 pulse per revolution dual channel output. These encoders operate from 5-28 volts and when ordered with the custom cable they plug directly into any of the SDS data acquisition systems.

Depth Encoders BEI and SCANCON

Surface Tension Transducer

Asco pressure transducer with custom cable can provide a surface tension readings on all SDS data acquisition systems when used with a hydraulic bellows type tension gauge. The series 44 transducer is a intrinsically safe 4-20ma 500 psi transducer. It has a 1/8” MNPT threaded connection and a Mini Din 43650 electrical interface.