scm in tata nano

36
PROJECT REPORT ON SUPPLY CHAIN MANAGEMENT IN TATA NANO SUBMITTED TO THE BIRLA INSTITUTE OF TECHNOLOGY, RANCHI FOR THE PARTIAL FULFILLMENT OF DEGREE OF MASTER OF BUSINESS ADMINISTRATION KURIYACHAN VITHAYATHIL MBA/8021/09 Under the Supervision of MR. SOOFI ANWAR DEPARTMENT OF MANAGEMENT BIRLA INSTITUTE OF TECHNOLOGY INTERNATIONAL CENTER RAS AL KHAIMAH UNITED ARAB EMIRATES

Upload: steve-cruz

Post on 27-Nov-2014

942 views

Category:

Documents


6 download

TRANSCRIPT

Page 1: Scm in Tata Nano

PROJECT REPORT ON

SUPPLY CHAIN MANAGEMENT IN TATA NANO

SUBMITTED TO THE

BIRLA INSTITUTE OF TECHNOLOGY, RANCHI

FOR THE PARTIAL FULFILLMENT OF DEGREE OF

MASTER OF BUSINESS ADMINISTRATION

KURIYACHAN VITHAYATHIL

MBA/8021/09

Under the Supervision of

MR. SOOFI ANWAR

DEPARTMENT OF MANAGEMENT

BIRLA INSTITUTE OF TECHNOLOGY

INTERNATIONAL CENTER

RAS AL KHAIMAH

UNITED ARAB EMIRATES

Page 2: Scm in Tata Nano

SUPPLY CHAIN MANAGEMENT IN TATA NANOTOPIC PAGE NO

1 Executive Summary

2 Company Profile

2.1 Introduction

2.2 Areas of business 

2.3 SWOT Analysis

2.4 Product Development and Nano

2.5 Idea Generation and Nano

2.6 Vision, Mission, Values

3 Cost Reduction

3.1 Definition

3.2 Advantages of Cost Reduction

3.3 Dangers of Cost Reduction

3.4 Scope of cost reduction

4 SUPPLY CHAIN MANAGEMENT

IN TATA NANO

4.1 Objective of the Study

4.2 Limitations of the Study

4.3 Scope of the Study

4.4 TATA NANO- The complete Supply

chain and Drivers

4.5 Challenges to Supply chain outsourcing

in India

5 Conclusions

References

SUPPLY CHAIN MANAGEMENT IN TATA NANO

Page 3: Scm in Tata Nano

CHAPTER 1EXECUTIVE SUMMARY

Tata Nano is the cheapest car in the world. It is sold in home country India around Rs 1-lakh i.e. approximately USD 2000. It is manufactured by Tata Motor Limited, the largest automobile company in India. It’s Chairman, Mr Ratan Tata envisions that Tata Nano to become a “People’s car” which is affordable by almost everybody. Tata Nano was first launched in India on 1st April 2009 and expected to be in Indian market by July 2009. Since launching, it has created a huge buzz all over India. Within the first two days of lunching, it has received 5500 booking. The figures keep increasing every day since the launching.

The car was the result of a five year research and development project carried out by Tata Nano development team. While developing the car, Tata Motors and its SUPPLY CHAIN MEMBER constantly made efforts to reduce the costs while ensuring quality of each and every component including engine, steering, wheels, tires, windshield washing system, gear shifter etc.

CHAPTER 2

Page 4: Scm in Tata Nano

COMPANY PROFILE2. INRODUCTION

The Tata Group (www.tata.com) comprises 96 operating companies in seven business sectors: information systems and communications; engineering; materials; services; energy; consumer products; and chemicals. The Group was founded by Jamsetji Tata in the mid 19th century, a period when India had just set out on the road to gaining independence from British rule. Consequently, Jamsetji Tata and those who followed him aligned business opportunities with the objective of nation building. This approach remains enshrined in the Group's ethos to this day.

The Tata Group is one of India's largest and most respected business conglomerates, with revenues in 2005-06 of $21.9 billion (Rs 967,229 million), the equivalent of about 2.8 per cent of the country's GDP, and a market capitalization of $46.9 billion. Tata companies together employ some 202,712 people.

The Group's 28 publicly listed enterprises—among them stand out names such as Tata Steel, Tata Consultancy Services, Tata Motors and Tata Tea—have a combined market capitalization that is the highest among Indian business houses in the private sector, and a shareholder base of over  2 million. The Tata Group has operations in more than 54 countries across six continents, and its companies export products and services to 120 nations.

The Tata family of companies shares a set of five core values: integrity, understanding, excellence, unity, and responsibility. These values, which have been part of the Group's beliefs and convictions from its earliest days, continue to guide and drive the business decisions of Tata companies. The Group and its enterprises have been steadfast and distinctive in their adherence to business ethics and their commitment to corporate social responsibility. This is a legacy that has earned the Group the trust of many millions of stakeholders in a measure few business houses anywhere in the world can match.

Every Tata company or enterprise operates independently. Each of these companies has its own board of directors and shareholders, to whom it is answerable. There are 27 publicly listed Tata enterprises and they have acombined market capitalisation of some $60 billion, and a shareholder base of

Page 5: Scm in Tata Nano

3.5 million. The major Tata companies are Tata Steel, Tata Motors, Tata Consultancy Services (TCS), Tata Power, Tata Chemicals, Tata Tea, Indian Hotels and Tata Communications.

Tata Steel became the sixth largest steel maker in the world after it acquired Corus. Tata Motors is among the top five commercial vehicle manufacturers in the world and has recently acquired Jaguar and Land Rover. TCS is a leading global software company, with delivery centres in the US, UK, Hungary, Brazil, Uruguay and China, besides India.  Tata Tea is the second largest branded tea company in the world, through its UK-based subsidiary Tetley. Tata Chemicals is the world’s second largest manufacturer of soda ash and Tata Communications is one of the world’s largest wholesale voice carriers.

In tandem with the increasing international foot print of Tata companies, the Tata brand is also gaining international recognition. Brand Finance, a UK-based consultancy firm, recently valued the Tata brand at$9.92 billion and ranked it 51st among the world's Top 100 brands. Business week magazine ranked Tata 13th among the '25 Most Innovative Companies' list and the Reputation Institute, USA, recently rated it 11th on its list of world's most reputable companies.

Founded by Jamsetji Tata in 1868, Tata’s early years were inspired by the spirit of nationalism. It pioneered several industries of national importance in India: steel, power, hospitality and airlines. In more recent times, its pioneering spirit has been showcased by companies such as TCS, India’s first software company, and Tata Motors, which made India’s first indigenously developed car, the Indica, in 1998 and recently unveiled the world’s lowest-cost car, the Tata Nano.

Tata companies have always believed in returning wealth to the society they serve. Two-thirds of the equity of Tata Sons, the Tata promoter company, is held by philanthropic trusts that have created national institutions for science and technology, medical research, social studies and the performing arts. The trusts also provide aid and assistance to non-government organizations working in the areas of education, healthcare and livelihoods. Tata companies also extend social welfare activities around their industrial units. The combined

Page 6: Scm in Tata Nano

development-related expenditure of the trusts and the companies amounts to around 4per cent of the net profits of all the Tata companies taken together.

Going forward, Tata is focusing on new technologies and innovation to drive its business in India and internationally. The Nano car is one example, as is the Eka supercomputer (developed by another Tata company), which in2008 was ranked the world’s fourth fastest. Anchored in India and wedded to traditional values and strong ethics, Tata companies are building multinational businesses that will achieve growth through excellence and innovation, while balancing the interests of shareholders, employees and civil society.

Introduction to Tata Motors:

Tata Motors was established in 1945, when the company began making trains.

It has its manufacturing base in Jamshedpur, Lucknow, and Pune and soon one more plant is going too established at Singur, West Bengal.

Product Manufactured - Passenger Cars and commercial vehicle. Installed Capacity - 350,000-400,000 vehicles a year. Investment - Rs 2,500 crore (Rs 25 billion). Turnover - $21.9 billion (Rs 967,229 million). Employees - 2,46,000/22001 Tata Motors had created the wealth Rs. 320 billion during 2001-2006 and

stood among top10 wealth creators in India.

2.2 Areas of business Tata Motors makes passenger cars, multi-utility vehicles and light, medium and heavy commercial vehicles-

Passenger cars: The company launched the compact Tata Indica in 1998, the sedan Indigo in 2002 and the station wagon Indigo Marina in 2004. Tata Motors also distributes Fiat’s cars in India.

Utility vehicles: The Tata Sumo was launched in 1994 and the Tata Safari in 1998.

Commercial vehicles: The commercial vehicle range extends from the light two-tonne truck to heavy dumpers and multi-axled vehicles in the above 40-tonne segment.

Page 7: Scm in Tata Nano

Passenger buses: The company also manufactures and sells passenger buses, 12-seaters to 60-seaters, in the light, medium and heavy segments.

Joint-ventures, subsidiaries, associates:- Tata Motors has joint ventures with Marcopolo, the Brazil-based maker of bus and coach bodies, and with Fiat Auto (to build a commercial vehicle at Fiat's facilities in Córdoba, Argentina).

Tata Daewoo Commercial Vehicle Company, a 100-per cent subsidiary of Tata Motors in the business of heavy commercial vehicles (www.daewootruck.co.kr/).

Tata Motors European Technical Centre is a UK-based, 100-per cent subsidiary engaged in design engineering and development of products.

Telco Construction Equipment Company makes construction equipment and allied services. Tata Motors has a 60 per cent holding; the rest is held by Hitachi Construction Machinery Company, Japan (www.telcon.co.in/).

Tata Technologies provides specialised engineering and design services, product lifecycle management and product-centric information technology services (www.tatatechnologies.com/).

Tata Motors (Thailand) is a joint venture between Tata Motors (70 per cent) and Thonburi Automotive Assembly Plant Co (30 per cent) to manufacture and market the company’s pickup vehicles in Thailand (www.tatamotors.co.th/).

Tata Cummins manufactures high horsepower engines used in the company’s range of commercial vehicles (www.tatacummins.com/).

HV Transmissions and HV Axles are 100-per cent subsidiaries that make gearboxes and axles for heavy and medium commercial vehicles.

TAL Manufacturing Solutions is a 100-per cent subsidiary that provides factory automation solutions and designs and manufactures a wide range of machine tools (www.tal.co.in/).

Hispano Carrocera is a Spanish bus manufacturing company in which Tata Motors has a 21-per cent stake (www.hispano-net.com/).

Concorde Motors is a 100 per cent subsidiary retailing Tata Motors’ range of passenger vehicles (www.concordemotors.com/).

Tata Motors Finance is a 100 per cent subsidiary in the business of financing customers and channel partners of Tata Motors (www.tatamotorfinance.com/).

Page 8: Scm in Tata Nano

Location

Tata Motors' plants are located at Jamshedpur (eastern India), Pune and Sanand (west), and Lucknow and Pantnagar (north). Tata Motors and Fiat have set up a common manufacturing facility at Ranjangaon, near Pune.

Tata Nano - ONE LAKH CAR PROJECT “People’s Car” “A promise is a promise,” said Rattan Tata,Chairman, Tata Motors, on 10th January, 2008, when the Nano was first displayed at the Auto Show in Delhi.The Nano project didn’t grab the attention of only Indians; the entire world had their eyes glued to the world’s cheapest car.A truly People’s Car, this time is from India.Though the dealer price is Rs. 1 lakh, the price on road,when it will be launched, will reach around Rs. 1,25,00but it will be still more affordable and will be more ecofriendly than most other cars giving a mileage of around23km/liters. The price of the car is such that a lot of richand HNIs, if interested, can buy the car just by a single swipe of their credit cards.Providing a car worth rupees one lakh car was the dream of the chairman of Tata motors Mr. Rattan Tata. And with high qualified IT skills people he has shown the Indian talents to whole the world.

Idea conceived by - RattanTata Cost of development - 1700 crores Manufacturing cost (excluding dealer margin and taxes) - Rs 65,000per

unit Development of Design - India Time for designing the car - 4 years Team - A team of 150 engineers, everyone below age 28 Biggest hurdle - To make a car cheap car without

Compromising design

Details of Nano Specs:Engine: 624 cc / 33 bhp4 door, 5 seater (and yes 4 Wheeled too)Rear EngineWeight: 600 kgsMileage - 22-23 km/liter

Page 9: Scm in Tata Nano

Variants:StandardDeluxe (with AC)

Future:Diesel VariantExports outside India or assembly plants outside

2.3 SWOT AnalysisSTRENGTH

Brand name TATA Cost price low Fuel efficient Safe

OPPORTUNITIES Large market for selling Awareness in the market First car in low range Can hit in global market

WEAKNESS Low power Not a status symbol Delay in manufacturing Limited features

THREATS Company rival Not sure to hit in rural and semi-urban areas

2.4 New Product Development and NanoAs seen before, A product can be considered new under the following situations:-

New-to-the-world products New product lines

Page 10: Scm in Tata Nano

Additions to existing product lines Improvements and revisions of existing products Repositioning Cost reductions

As far as Nano is concerned, it falls into new to the world products in the context that it has made a history for the cheapest car ever made without compromising on quality. I.e. best way value analysis.

It can also be considered as new product in the since of cost reduction as it’s the first time in the history that such a cheap car is produced. The story of the Nano is not confined to its impact on the auto industry. It's a tale that illuminates the India of today—an eager, ambitious nation with a combination of engineering talent, a desire for low costs and value, and the hunger of young managers looking to break from a hidebound corporate environment. Indeed, the team that worked on the Nano—on average aged between 25 and 30—has helped to flatten Tata Motors' stodgy, multilayered management structure, which has resulted in an unexpected side-benefit called "organizational innovation".

2.5 Idea Generation and NanoA dream is born –Says, ”I observed families riding on two wheelers -- the father driving the scooter, his young kid standing in front of him, his wife seated behind him holding a little baby. Add to that the slippery roads & Night time too. It is downright dangerous. It led me to wonder whether one could conceive of a safe, affordable, all weather form of transport for such a family.”

So when Tata Motors needed someone to take charge of the company's most ambitious plan yet to build the world's cheapest car ever Ravi Kant, who by then had become the company's managing director, again turned to Wagh. Wagh remembers what he learned marketing the little truck. "People want to move from two-wheelers to four-wheelers," he says. "Today they can't afford it."More and more can, but Indian car buyers today represent a tiny slice of a potentially giant market India has just seven cars per 1,000 people. India's auto industry has grown an average of 12% for the past decade, but just 1.3 million passenger vehicles were sold in India in the fiscal year ending March 2006. That

Page 11: Scm in Tata Nano

means a billion Indians buy about the same number of cars in a year as 300 million Americans buy in a month.If four wheels cost as little as two wheels, that could change fast. About 7 million scooters and motorcycles were sold in India last year, typically for prices between 30,000 rupees and 70,000 rupees, about $675 to $1,600. Tata is targeting a price of 100,000 rupees one lakh, in Indian terms of measurement or about $2,500 at current exchange rates, for its small car. That sounds impossibly cheap in the West but remains three times higher than India's annual per capita income. The average pay for factory workers at Tata Motors is just $5,500 a year.

Idea screening

Trying to build a car cheap enough for motorcycle buyers seems to make sense now but seemed crazy several years ago when Rattan Tata, longtime chairman of Tata Motors and scion of the nation's giant Tata Group conglomerate, first mentioned his dream of building a one-lakh car in 2003. "They are still saying it can't be done," he says, insisting that it can and will. "Everybody is talking of small cars as $5,000 or $7,000. After we get done with it, there will hopefully be a new definition of low-cost."

2.6 VISION, MISSION, VALUES

VISIONThe vision statement of Tata Motors Limited, India's largest automobile company, is to be "best in the manner in which we operate, best in the products we deliver, and best in our value system and ethics."MISSION"Tata Motors is committed in letter and spirit to Corporate Social Responsibility". 

VALUES

The Tata name is a unique asset representing leadership with trust. Leveraging this asset to enhance group synergy and becoming globally competitive is our chosen route to sustained growth and long-term success.

Integrity: We will conduct our business fairly, with honesty and transparency. Everything we do must stand the test of public scrutiny.

Page 12: Scm in Tata Nano

Understanding: We will be caring, show respect, compassion and humanity for our colleagues and customers around the world, and always work for the benefit of the communities we serve.

Excellence: We will constantly strive to achieve the highest possible standards in our day-to-day work and in the quality of the goods and services we provide.

Unity: We will work cohesively with our colleagues across the group and with our customers and partners around the world, building strong relationships based on tolerance, understanding and mutual cooperation.

Responsibility: We will continue to be responsible, sensitive to the countries, communities and environments in which we work, always ensuring that what comes from the people goes back to the people many times over.

Page 13: Scm in Tata Nano

CHAPTER 3COST REDUCTION

3.1 Definition:-

Cost Reduction may be defined as the real and permanent reduction on the cost of goods manufactured/sold or the services rendered without impairing their quality and suitability for the intended use.

3.2 Advantages of Cost Reduction Increases profit – dividends to shareholders. Money for labour welfare schemes. Goods will be available at a cheaper rate. Meets competition Revenue to government by taxation. Export price may be lowered. Cost reduction is obtained by increasing productivity. Cost reduction lays emphasis on continuous search for improvement

which will improve the image of the firm for long – term benefits.

3.3 Dangers of Cost Reduction Quality may be sacrificed at the cost of reduction in cost. Cost reduction programme may not be liked by the employees. Reduction in cost may not be real and permanent. Conflict between organisational objective and individual objective.

3.4 Scope of cost reductionCost reduction is attainable in almost all areas of business activities. There is perhaps no situation which cannot be improved. It covers a wide range like new layout, product design, production methods, materials and machines in factories as well as in offices, innovation in marketing etc. it may also extend to specified activities like purchasing, handling, packaging, shipping, warehousing, marketing, use of administrative facilities and even the utilization of financial resources.

Page 14: Scm in Tata Nano

CHAPTER 4SUPPLY CHAIN MANAGEMENT IN TATA NANO

4.1 OBJECTIVES OF THE STUDY In-depth study about the SUPPLY CHAIN in TATA NANO. Understand the supply chain drivers of TATA NANO Find out the different partners of supply chain Raw material supplied different members

4.2 SCOPE OF THE STUDYGathering information and theoretical knowledge is a part of study. As the study has got wide relevance is formulating valid information about the organization, it helps in getting a critical look into the supply chain activities of the organization and the ways in which they have been benefited through this function.

4.3 LIMITATIONS OF THE STUDY The period of the study was limited to 3 weeks. Data source is only from internet. Totally based on secondary data. Lack of on field experience. Accuracy will be low (data form internet).

4.4 TATA NANO- THE COMPLETE SUPPLY CHAIN

Page 15: Scm in Tata Nano

DRIVERS OF SUPPLY CHAIN

FACILITY LOCATION

Gujarat is a better choice for logistical reasons and a satisfactory industrial and

labour environment in the State. The State, like West Bengal, is well-connected

by air, sea and land routes. Besides, the Delhi-Mumbai Industrial Corridor

Facility Location

Transportation

Sourcing

Inventory

Information

Pricing

Multi – modal connectivityMICTInfrastructure and

ConnectivityRajkotLand for supplier parksSupplier proximity and

convenienceGMIndustrial and Labor environ.AhmadabadBusiness Environment

Gujarat Industrial Development Corporation (GIDC)LandGovernment Regulation

and SupportGujarat Agriculture University (GAU)

Land

Delhi-Mumbai Industrial Corridor (DMIC)Special Investment Region (SIR)Future Prospects

Page 16: Scm in Tata Nano

(DMIC) passing two-thirds through Gujarat and the proposed Special

Investment Region (SIR) would soon make it even more attractive.

The location of the nano plant was close to the Charodi railway station, it was just 200 km from Rajkot, where the best engineering workforce can be found.

Ports were just 300-400 km away from both Pipavav and Mundra (Mundra had the edge given its container depots for vehicles - Maruti uses them - and a huge ro-ro (or roll on, roll off) terminal for loading and unloading vehicles).

Then there was a 6-lane highway just 1 km away from the land earmarked for Tata Motors. If the Tatas gave the go-ahead, the State could acquire this kilometer of land, too. Last week, Tatas gave their go-ahead. In less than 24 hours, the 1,000 acres owned by the state were transferred to the Tatas at market rate.

TRANSPORTATION:-

This is called “open distribution" innovation because it mobilizes large numbers of third parties to reach remote rural consumers, tailor the products and services to more effectively serve their needs, and add value to the core product or service through ancillary services. Three innovations in products and processes come together to support "open distribution:"• increased modularity (both in products and processes)

97% local vendorsAlmost half located in Vendor Park

Most of the suppliers are located across India.JIT and JIS requirements

Truck optimization softwaresLead Time Map

Increased modularityLocal 3PL leveraged

Open Distribution

Optimal

transportatio

n netwo

rk

Shorter Lead TImes

Distributed Assembly

Model

Page 17: Scm in Tata Nano

• aggressive leveraging of existing third-party, often noncommercial, institutions in rural areas to more effectively reach target customers

• creative use of information technology, carefully integrated with social institutions, to encourage use and deliver even greater value.

Modular designs combined with creative leverage of local third-party institutions help participants to get better faster. Companies such as Tata and Cummins are going far beyond "customer co-creation" in the narrow sense of soliciting isolated ideas from customers. Instead, they are building long-term personal relationships with customers, enriched by the specialized capabilities of broad networks of third parties that generate much deeper insight into customer needs and afford opportunities to tailor value.

SOURCING:-

TATA divided the components into two parts: proprietary designs and tata

motor designs. For proprietary designs TATA motors went with established

suppliers such as BOSCH that supplies the engine management system and

significantly contributed to diesel engine. For components and systems designed

in-house, Tata Motors chose suppliers with strong process capabilities who

could give valuable suggestions and improve on the designs. Nearly everything

has been sourced locally and the Nano will have 97% local content from day

Suppliers divided into Proprietary and Non-proprietary.

97% parts sourced from local suppliers.

Innovation in mfg. processes done locally to avoid extra costs

Long term volume contracts rather than annual contracts

75% single source components

Page 18: Scm in Tata Nano

one. Tata’s suppliers were an integral part of not only the design and

development process, but also purchasing.

SUPPLIERS LIST:-

The key decision was to bring in suppliers. Tata brought following suppliers for

achieving this.

1. SUPPLIERS TO TATA NANO

Bosch

Freudenburg

Caparo

GKN

Continental

Itw Deltar

Delphi

INA

Denso

Johnson Controls

Fag

Mahle

Ficosa

Saint gobain

TRW

Ceekay

Vibracoustic

Visteon

Z.f (friedrichshafen) A.G

Behr

Page 19: Scm in Tata Nano

SUPPLIED MATERIALS BY SUPPLIERS:-

BOSCH: A German based automotive company.

It supplies Gasoline injection system, starter, alternator, brake system.

Caparo Vehicle Technologies ( CVT ) : A Europe based company.

it supplies Inner structural panels.

Continental motors: it is a Europe based company.

It supplies fuel level sensor, gasoline fuel supply system.

Delphi : an automotive parts company headquartered in Troy, Michigan, USA.

It supplies instrument clusters.

Denso: a global automotive components manufacturer headquartered in the city of Kariya, Japan.

It supplies Windshield wiper system.

FAG: A German based company manufacturing ball bearings.

It supplies rear wheel bearings.

Ficosa: It supplies Rear-view mirrors, interior mirrors, manual and CVT shifters, washer system .

Freudenberg: a town in the, in North Rhine-Westphalia, Germany.

It supplies Engine sealing.

BEHR GmbH & Co : German corporation

It supplies engine cooling systems and HVAC for the luxury version.

ZF Friedrichshafen: a town on the northern side of Lake Constance in southern Germany, leading worldwide supplier of driveline and chassis technology.

Page 20: Scm in Tata Nano

It supplies Chassis components, including tie rods

Vistoen: a U.S based company.

It supplies air induction system.

Vibracoustic: it supplies Engine mounts.

TRW: an American corporation.

It supplies break systems.

Saint-Gobain : a French multinational corporation, headquartered on the outskirts of Paris . Originally a mirror manufacturer, it now also produces a variety of construction and high-performance materials.

It supplies glazing.

Mahle GmbH: a german based company headquartered in Stuttgart.

it supplies Camshafts, spin-on oil filters, fuel filters and air cleaners .

Illinois Tool Works (Itw): a U.S based company.

It supplies Outside and inside door handles .

Johnson Controls: a U.S based company.

It supplies seating systems.

INVENTORY:-

Just in time

Inventory

Leveraging the proximity of suppliersLess number of suppliers

Multi-purpo

se component

s

Innovative but not too much complexity in designLess number of total components

Seamless

Integration

Accurate data on forecastEarly Capture of design issues

Page 21: Scm in Tata Nano

Above three strategies used for inventory, helped in, reducing inventory reduces

the working capital cost , reduces warehousing costs and obsolescence costs .

To reduce inventory, demand fluctuation will have to be reduced, reliability of

inventory replenishment will have to increased, Inventory Record Accuracy will

have to be above ~95% and supply chain length will have to be reduced.

IT STARTEGY:-

• Tata Motors investment in IT for efficient supply chain

– Implementation of SAP 3.1 and 4.6c (Asia’s largest

implementation)

– SAP SRM (Supplier Relationship Management) for end to end

supply chain integration)

– SAP WM (Warehouse Management) combined with barcodes to

automate warehouse operations)

– Knowledge based Engineering (KBE) in design

• SRM platform used for sustainable savings and value generation

• Benefits

– Reduction in procurement cycle time

– Improve process by e-procurement

– Real time supplier integration with business

– Knowledge sharing

• SAP WM with mobile data entry is combined with RF Technology

(barcodes) to automate warehouse operations

• Benefits

– Improved throughput at warehouses by RF enabled processes

– Capability enhancement to handle more parts and team size

– Real time inventory tracking

• Knowledge based engineering in CAD/CAM with help of KNEXT – in

house software

Page 22: Scm in Tata Nano

• Benefits of KBE

• 30% reduction in cycle time

• Designer’s knowledge and company’s best practices retained

PRICING:-

COST OF THE SUPPLY CHAIN:-

• Conventional Strategy

Calculate Production costs + Margin = Price

• Tata Nano’s strategy

Set price => Work backwards & Challenge Suppliers to lower costs

TARGET PRICING / PENETRATION PRICING/ LOW PRICING STRATEGY

These are the terms that designed the world’s cheapest car. It was important to

understand that the car was to be designed within the specified range of 1 Lakh

Rupees in the Indian Market.

The ‘Target Pricing’ attempted to understand what features were required in

the car.

Reducing Inventory

Eliminating waiting time and delays

Increasing utilization of warehouses & trucks

Optimizing location of warehouses and plants

Optimizing transportation networks

Page 23: Scm in Tata Nano

The pricing strategy followed by the Tata Motors was “Penetration Pricing”.

This is the strategy where an organization sets the price of the product to a new

low level so that consumers switch to the product and the product penetrates the

market rapidly. The promise of 1 Lakh rupees car stated by the Tata’s was the

first step of initiation of this strategy.

4.5 CHALLENGES TO SUPPLU CHAIN OUTSOURCING IN INDIA

Following are internal challenges to supply chain outsourcing in India

Strategic

– Management buy-in

– Cultural fit

– Scope of outsourcing

Organizational

– Restructuring organization

– Re-deploying existing resources

– Anticipating quantum and timing of change

– Managing change

Operational

– Reengineering existing processes in view of outsourcing strategy

– Framing KPIs/ SLAs both for internal resources and for external agencies

– Implementing processes across the organization and initiating MIS generation

– Measuring performance and benefits of outsourcing

Following are challenges in vendor selection

Selection Challenges

– Ability to understand and assess customer’s requirement

– Project management and roll-out capabilities

– Framing appropriate performance measurement system

– Information technology integration and interface

– IT and communication infrastructure up gradation

– Managing relationship with customers/ vendors/ authorities/ employees

Page 24: Scm in Tata Nano

– Developing short-term and long-term infrastructure

– Developing strong intra-country dependable distribution service

Following are external challenges

Optimizing within infrastructure constraints

• Poor road conditions

• Lack of dependable communication infrastructures

• Real estate hurdles

Managing multiple government authorities

• Sales tax authority

• Octroi Authorities/ Entry Tax Authorities

Page 25: Scm in Tata Nano

CHAPTER - 5CONCLUSION

The great wonder car by Tata’s has stunned the entire world. Critics who often said that it was not possible to make a car at a price below $3000 were taken to a back sit when Ratan Tata the chairman of Tata Motors unveiled this car in New Delhi at a price of $2500. Since then it has been in lime light and has been making news in the auto sector throughout the world. 

REFERENCE

Page 26: Scm in Tata Nano

TataNano.com tatamotors.com www.tatatechnologies.com www.tatamotors.co.th www.tatacummins.com www.tatamotorfinance.com Scm project by KANIKA LUTHRA Scm tata nano ppt by

Neha Baid Anand Pillay Arun Sharma Naveen Kumar Nidheesh Hirwani