scr - technical manual - print version -...
TRANSCRIPT
© 2016 Inepro B.V. All rights reserved
Technical Manual | SCR - Technical Manual
SCR - Technical Manual
Product Version: Rev.1
Version of this manual: 1.0.5
SCR - Technical Manual
Congratulations on your selection of Inepro card readers. We are certain you will bepleased with your purchase of one of the flexibele solutions of the market.
We want to help you get the best result from your Inepro Back Office Suite. Thismanual contains information on how to do that; please read it carefully. Due tocontinuous product improvements this manual is subject to changes without notice.
We strongly recommend you read the license agreement to fully understand itscoverage and your responsibilities of ownership.
Your Inepro dealer is dedicated to your satisfaction and will be pleased to answer yourquestions and your concerns.
Best wishes,Inepro BV.
The most versatile card reader solution
All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical,including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of thepublisher.
Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. Thepublisher and the author make no claim to these trademarks.
While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility forerrors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs andsource code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any othercommercial damage caused or alleged to have been caused directly or indirectly by this document.
Version 1.0.5 created: August 2016 in Nieuw-Vennep.
Publisher
Managing Editor
Technical Editors
Cover Design
Inepro B.V.
K. de Graaf
P. Blom
K. de Graaf
Production
Inepro B.V.
Team Coordinator
R. Groen
H. Wagenaar
K. de Graaf
SCR - Technical Manual
http://www.inepro.com
Table of Contents
Introduction 2
Requirements 4
Components 6
Optional Components 8
Test 12........................................................................................................................................................ 12Software 1
........................................................................................................................................................ 13Hardware 2
User Interface 16........................................................................................................................................................ 16LED's 1
Technical Specifications 18
Troubleshooting 20
Appendices 22........................................................................................................................................................ 22Appendix I 1
Notes 24
Notes 26
END-USER LICENSE AGREEMENT I
ATTENTION!!
Read this manual carefully before installing the SCR - Technical Manual!
Mains connection
Guarentee
Security
Before connecting the appliance to the mains, check that the mains supply voltage corresponds to thevoltage printed on the type plate of the adapter. If the mains voltage is different, consult your supplier.
No guarantee can be given if safety regulations are not followed.
Always disconnect the power supply before handling anything inside the device.
Directives
Version 1.0.5 - I
This device may only be used indoors.
Indoor User Only
Changes and/or mdodificationsChanges and/or modfications whch have not been approved by the responsible party can void the user'sauthorty to operate the equitement.
This device is complies with part 15 of the FCC rules, operation is subject to two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, includng interference that may cause undesired operation.
FCC Federal Communications Commission - US
This device is in conformity with the EMC directive and low-voltage directive.
CE Conformité Europeène (Conform European Norm)
Appareil concernés:MCR708, MCR708G, DCR708, DCR708G
Le présent appareil est conforme aux CNRd’Industrie Canada applicables aux appareils radioexempts de licence.L’exploitation est autorisée aux deux conditionssuivantes :(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter toutbrouillage radioélectrique subi, même si lebrouillage est susceptible d’en compromettre lefonctionnement.
Conformité d’Industrie Canada
Relevant Devices:MCR708, MCR708G, DCR708, DCR708G
This device complies with Industry Canada’slicence-exempt RSSs. Operation is subject to thefollowing two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, includinginterference that may cause undesired operation of thedevice.
Confirm Canada Industries
End of life directives
Inepro is paying a lot of attention to environmentally-friendly production. Your new device contain materials which can be recycled andreused. At the end of its life specialised companies can dismantle the discarded device to recycle the reusable materials and to minimise theamount of materials to be disposed of. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteriesand old requipment.
This device is in conformity with the Korea Certification directive.
KC - Korea Certification
This device is in conformity with Australian law.
Regulatory Compliance Mark
Introduction
2 - SCR - Technical Manual
Introduction
In this manual you find the instructions to install and configure your Slim Card Reader (SCR). This manual is meant for all theInepro Slim Card Readers.This manual, the Slim Card Reader hardware and software are subject to change, make sure you have the latest version ofthis manual, because the older versions may have become obsolete.
FunctionThe purpose of the Slim Card Reader is to read the unique ID contained in the card that is presented to the reader andtransfer this ID to a server. In most cases this data will be the card serial number. To facilitate this a variety of card readersoftware modules have been developed. Our configuration tool will enable you to change the settings on the Slim CardReader board
Requirements
4 - SCR - Technical Manual
Requirements
The SCR has no known requirements other than a USB host that can read a keyboard-like Human Interface Device
Components
6 - SCR - Technical Manual
Components
§ P400000 - SCR§ SCR Housing Top§ SCR Antenna Board§ SCR Housing Bottom§ SCR LED Cover§ Screw cross-head for plastic M2.2x8mm - SCR
§ P120646 - External SCR RFID Foil§ P520215 - Ferrite core for round cable 227 Ohms - 100MHz§ P500943 - Double-sided adhesive tape SCR - 50x22x0.1mm§§ P279202 - SCR USB A - Micro B cable 1.80M§ P551211 - Download instructions
Check Components Please check if all the components are in the set before you continue with the installation and setup.
Some parts may already have been pre-assembled
Optional Components
8 - SCR - Technical Manual
Optional Components
The SCR has a couple of optional components that are advisable to use in specific cases. This is an overview of thesecomponents:
SCR Bracket SetThe SCR can be used on a MFP (a Multi Functional Printer). It can be placed inside or stuck to the exterior with tape.For a more elegant solution a bracket set is available:
SCR708 Bracket - Art. Nr.: 400001 Follow steps 1-4 to assemble the bracket.
Version 1.0.5 - 9
SCR USB Mini B - Micro B OTG Cable 0.50m & 1.80mThis cable is needed when a USB OTG (On The Go) connection is used in the MFP. The cable is available at a length of 0.5mor 1.8m.
SCR USB Mini B - Micro B OTG cable 0.50m - P279211 / SCR USB Mini B - Micro B OTG cable 1.80m - P279212
These can be ordered with your supplier of Inepro products
Test
12 - SCR - Technical Manual
Software
For the SCR there are 2 tools available each with its specific features. Connect the SCR to a computer or laptop and present acard to the reader. Please note that the reader needs to have the HID RAW Configuration. (See Omni RFID Program toolmanual for more details).
Omni RFID Reader Configuration Tool This tool is ideal for card investigation of customer cards With this tool it is possible to change the behaviour of the card reader, for example it is possible to change the read out ofthe RFID card but also the LEDs can be switched off or the volume of the beeper can be changed. Once finished it is possibleto store the created settings in a special config file which can be programmed via the Inepro Omni ISO Reader Program tool.For more information regarding this Reader and Configuration tool please consult it's user manual.
Quick-Test with the Windows Calculator:1. Connect to Inepro USB Card Reader to the USB PC or laptop.2. Start the Calculator application on Windows, set de calculator under 'View' in on 'Scientific'.3. Set the number system to hex decimal ('Hex').4. Present a card to the Inepro USB card reader.5. Set the number system to decimal ('Dec') to read out the decimal value of this number. This is the card number
Hardware
Version 1.0.5 - 13
Hardware
Physical test Inepro USB card reader1. Remove the top cover of the USB controller2. Connect the Inepro USB Card Reader to the USB port of a computer.3. Check the indicator LED's to see if the board is operating as it should.
Blue Led burning:Reader is powered and has connection
Put a card on the SCR:Both the yellow andthe green LED should lit.Yellow: card detectedGreen: card recognised.
This concludes the hardware test
User Interface
16 - SCR - Technical Manual
LED's
On the USB interface board are a number of LED’s. Each of the LED's has a label, explaining their use.See the table below
Image Function Standby /Normal
Triggered /Not OK
Card is notrecognized
Off On
Card indetection field
Off On
CardRecognized
Off On
Reader is onand connected
OnFlashes(no connection)
Technical Specifications
18 - SCR - Technical Manual
Specifications
PowerPower Supply 5V
Power Consumption DC5V DC: At maximum (depending on the configuration)0.5 A
HousingMaterial PC ABS V0
Colour Intelligent Grey / Intelligent Dark Grey
Dimensions W x D x H 54.0 x 82.35 x 15.9 mm.
CPUARM 32-bit Cortex®-M3 CPU Core
Memory (working storage)SRAM 20 Kb
StorageFalsh Memory 64 Kb
OutputsUSB Port 1x External Micro USB
InputsUSB Port 1x External Micro USB
User InterfaceLED's Red, Yellow/Orange, Green and Blue
AudioPiezo Buzzer 4kHz, 17 x 4.5mm, Max. 80 dB
Environmental conditionsEMI / Safety CE, FCC Class A
Operating Temperature (Metric) 0-40 degrees Celsius
Operating Temperature (Non-Metric) 32-104 degrees Fahrenheit
Relative Humidity (Non Condensing) 10%-90%
Troubleshooting
20 - SCR - Technical Manual
Troubleshooting
Sometimes things do not work out as expected, if so please read through this section before contacting your serviceorganisation or dealer. Changes are you are able to solve the issue yourself.The section is set up in a Symptom - Prognosis - Resolution format, that is first the symptom is given, then the possiblecauses and then the resolution for those causes.
Symptom(s): Card not recognized
Prognosis: The SCR is not connected
Scope: All Devices
Resolution: A - Check if the blue light is flashing, if it is the reader is not connected to the server. Please check the availability of the
server with another device like a laptop on that network connection.B - If the blue light burns constantly1) Try again2) Make sure your card has been linked to your account.3) Check if the problem occurs also with other cards, or on other devices.C - If the problem has not been solved, please contact your supplier
END-USER LICENSE AGREEMENT
END-USER LICENSE AGREEMENTINEPRO BACK OFFICE SUITE BY INEPRO BV
THE PROGRAM IS COPYRIGHTED AND LICENSED (NOT SOLD). BY PURCHASING THE PROGRAM, YOU ARE ACCEPTING AND AGREEING TOTHE TERMS OF THIS LICENSE AGREEMENT. THIS LICENSE AGREEMENT REPRESENTS THE ENTIRE AGREEMENT CONCERNING THEPROGRAM, BETWEEN YOU AND INEPRO BV, (REFERRED TO AS "LICENSOR"), AND IT SUPERSEDES ANY PRIOR PROPOSAL,REPRESENTATION, OR UNDERSTANDING BETWEEN THE PARTIES.
1. License Grant. Licensor hereby grants to you, and you accept, a nonexclusive license to use the program in machine-readable, object codeform only, for use only as authorized in this License Agreement. The Programs may be used only on computers owned, leased or otherwisecontrolled by you. The program shall only manage the number of devices specified in the purchase agreement. You agree that you may notreverse assemble, reverse compile, or otherwise translate the Program.
2. Term (Demo Version Only). This License commences upon the installation of the software and is effective for 90 days following the dateyou install the software. This License terminates automatically without notice from Inepro BV upon the expiration of the evaluation term or ifyou fail to comply with any provision of this License. Upon termination you shall remove the SOFTWARE from your computer(s).
3. Licensor's Rights. You acknowledge and agree that the Program is proprietary to Licensor and protected under copyright law. You furtheracknowledge and agree the all right, title, and interest in and to the Program, including associated intellectual property rights, are and shallremain with Licensor. The License Agreement does not convey to you an interest in or to the Program, but only a limited right of userevocable in accordance with the terms of this License Agreement.
4. No Warranty; Limitation of Liability. YOU ACKNOWLEDGE THAT THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS WITHOUT WARRANTYOF ANY KIND. LICENSOR MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE USE OR PERFORMANCE OF THE PROGRAM.LICENSOR EXPRESSLY DISCLAIMS THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. LICENSORSHALL HAVE NO LIABILITY TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE CAUSED, DIRECTLY OR INDIRECTLY, BY THEPROGRAM, INCLUDING, BUT NOT LIMITED TO, ANY INTERRUPTION OF SERVICES, LOSS OF BUSINESS, LOSS OF DATA OR SPECIAL,CONSEQUENTIAL OR INCIDENTAL DAMAGES.
5. Severability. Should any term of this License Agreement be declared void or unenforceable by any court of competent jurisdiction, suchdeclaration will have no effect on the remaining terms hereof.
6. No Waiver. The failure of either party to enforce any rights granted hereunder or to take action against the other party in the event of anybreach hereunder shall not be deemed a waiver by that party as to subsequent enforcement of rights or subsequent actions in the event offuture breaches.
7. Update Checks. You acknowledge and agree to allow Inepro Back Office Suite version and license status details to be sent to Inepro BVwhen you request to "Check for updates". This allows the Inepro Back Office Suite software to determine whether software updates areavailable in real-time.
8. Service. Licensor will utilize its best efforts to maintain acceptable performance of services, but Licensor makes absolutely no warrantieswhatsoever, express or implied, including warranty of merchantability or fitness for a particular purpose. Licensor cannot guaranteecontinuous service, service at any particular time, or integrity of data stored or transmitted via its system or via the Internet.
9. Data. Licensor will not be liable for the inadvertent disclosure of, corruption or erasure of data transmitted or received or stored on itssystem. Licensor shall not be liable to Licensee or any of its customers for any claims or damages which may be suffered by Licensee or itscustomers, including, but not limited to, losses or damages of any and every nature, resulting from the loss of data, inability to access theSoftware, or inability to transmit or receive information, caused by, or resulting from, delays, nondeliveries, or service interruptions whetheror not caused by the fault or negligence of Licensor.
Version 1.0.5 - I