scratch build a water tower. before we really get started there’s a couple of things to consider...
TRANSCRIPT
![Page 1: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/1.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
![Page 2: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/2.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Build in wood or styrene?
![Page 3: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/3.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
What Scale are you going to build your Water Tower in?
The plans are in HO-Scale, Find a copier and adjust the copies of your plan as indicated
below:
Z = 39.6%N = 54.4%S = 136.1%O = 181.5%G = 387.1%
![Page 4: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/4.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Pre-Stain all wood before gluing, the glue will not take the stain
Add wood grain with a razor saw and a wire
brush to all styrene
![Page 5: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/5.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Standard Gauge or Narrow Gauge?
![Page 6: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/6.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Cement footings or Timber?
![Page 7: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/7.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Frost box, fully enclosed Northern style, or no Frost protection
![Page 8: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/8.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Mainline tank or small branch line?
![Page 9: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/9.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Straight sides or tapered sides?
![Page 10: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/10.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Round tank bands of flat?
![Page 11: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/11.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Roof style? Flat; Hexagon; Round; No roof
![Page 12: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/12.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerBefore we really get started there’s a couple of things to
consider
Water spout on one side or both sides?
![Page 13: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/13.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerOr maybe you want a specialty tank like these
Double tank towerSmall Horizontal tank
![Page 14: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/14.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThree different set of plans to start from
D&RGW Water Tank by Durango Press
![Page 15: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/15.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThree different set of plans to start from
The Baker Tank by Centennial Models
![Page 16: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/16.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThree different set of plans to start from
The Water Tank by Campbell Scale Models
![Page 17: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/17.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThis clinic is written for the “Campbells” tank
If you plan on using one of the other plans you will have to make adjustments as you go
![Page 18: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/18.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Standard Gauge17 feet
We’ll begin this project by cutting 12 legs out of 12x12 material
Wood – always pre-stain before gluingStyrene – always add wood grain before gluing
Narrow Gauge13 feet
![Page 19: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/19.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
2 Long Cap Timbers, 22 feet long
Cut TWO long Cap Timbers and TWO short Cap Timbersout of 12x12 material
Wood – always pre-stain before gluingStyrene – always add wood grain before gluing
2 Short Cap Timbers, ½ length of long Cap Timber
If you plan on Timber
footings then cut TWO
MORE of EACH for the bases
Adjust the length if you are going to
use a different size tank
![Page 20: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/20.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now we’ll cut the 4 frost box walls out of the scribed siding material
Standard Gauge17 feet
Narrow Gauge13 feet
5’6”
5’6”
![Page 21: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/21.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Next, we need to add a door to ONE of the wall sections using 2x4 material
6’6”Tall door
3’ wide door
Alternative:Purchase a Grandt Line door, cut an opening, and
install it.
![Page 22: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/22.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Don’t forget about a door knob.
N Scale = use an ordinary straight pin and cut off the head
HO & S Scales use an ordinary straight pin with the head
O & G scales use a dress maker pin with an appropriate sized head
N-Scale HO & S-Scales
O-Scale
G-Scale
![Page 23: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/23.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Don’t forget about a door knob.
Drill a hole the size of your pin, 3’ feet from the bottom,Insert the pin and cut off the excess from the back
3’ from the
bottom
![Page 24: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/24.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Building the Frost box
Start with 2 of the walls and edge glue a leg on each side
Face
Back
![Page 25: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/25.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now attach the front wall assembly to the template
Option: Cover the template with wax
paper and use double sided tapeOr
Glue directly onto the template and clean up after
![Page 26: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/26.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Glue the Cap Timber on top of the wall and centered
![Page 27: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/27.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
and attach TWO more legs to the Cap Timber
![Page 28: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/28.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Then add the Cross Bracing using 4x6 material (2x6 in larger scales)
Cut Square and attach to outsides of
legs
Cut Diagonal and attach to
insides of legs
Two methods to choose from
![Page 29: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/29.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Shown here is the X-bracing for both Gauges
Standard Gauge
Narrow Gauge
![Page 30: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/30.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Repeat the last4 steps for the back wall
Two methods to choose from
![Page 31: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/31.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Secure 2 legs to the drawing and glue one of the short Cap Timbers on top, centered
![Page 32: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/32.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now add the X-Bracing – Don’t forget to build 2 of these assemblies
![Page 33: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/33.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now lay the back wall on your work surface face down
Then lay the front wall on top of the back wall face upAnd align everything
![Page 34: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/34.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now, holding everything steady, drill a small hole through the upper right X-bracing all the way through both assemblies
Drill size depends on the size of the rods you will be using for the tension rods
![Page 35: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/35.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Insert a slightly over length piece of your rod material to maintain alignment
![Page 36: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/36.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Drill the remaining rod holes in the outside legs, inserting at least 1 more rod to keep alignment
![Page 37: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/37.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
With all holes drilled you can separate the assemblies and lay them on your work surface face up
![Page 38: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/38.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now lay a short bent on top of each of them, centered
![Page 39: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/39.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Repeat the drill & insert rod process for the inside legs
![Page 40: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/40.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now turn the long bents over and add inside supports using 6x6 material along the seam between the wall and the leg
This will form an inside corner for the side walls of the frost box
![Page 41: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/41.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Cut out the footprint template and tape it to your work surface
Option: Cover the template with wax paper and use double sided tape
OrGlue directly onto the template and clean up after
![Page 42: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/42.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Re-insert the over length rods through the outside legs of the long bents and secure the long bents to the footprint template
![Page 43: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/43.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Add X-Bracing between the two long bent assemblies
![Page 44: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/44.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Finally, add the two side walls of the Frost Box
Note: If you’ve chosen to not add a Frost box then add X-bracing between all for inside legs
![Page 45: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/45.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerNow, insert over-length rods into a short bent assembly and
attach to the template
![Page 46: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/46.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThen add X-Bracing between the short bent and the center legs
of the long bent
![Page 47: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/47.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerRepeat for the back side
![Page 48: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/48.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerNow carefully cut and add the 4 diagonal Cap Timbers
![Page 49: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/49.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Now remove all the over-length rods and cut them to size, re-insert and secure with ACC
The length should be slightly shorter than what it would take to go all the way through both legs so that the outside is recessed
sufficiently to accept a Nut-Bolt-Washer (NBW) casting
Shown on outside of leg to
demo length
![Page 50: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/50.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Get out the Optivisors and the tweezers, it’s time to add the NBWs
Cut the NBW from the sprue, leaving a short shaft,
dip the shaft in ACC and insert into the rod holes
![Page 51: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/51.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerOnce all the NBWs are installed
paint them and the tension rods a rust color
![Page 52: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/52.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerIf you are planning on Timber footings then duplicate the long
and short Cap Timbers out of 12x12 material and attach under the legs parallel to the Cap Timbers
![Page 53: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/53.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThen cut short timbers from the 12x12 material and add under
the two Frost box side walls to form a square
Foot Timbers
Add these
![Page 54: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/54.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
If you desire a concrete base then cut a block 8’6”x8’6”x12”
And glue it centered under the Frost box
![Page 55: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/55.jpg)
Scratch Build a Water Scratch Build a Water TowerTowerThen cut 8 blocks 24”x24”x12”
And glue them centered under each remaining leg
If desired, file a slight taper on all 4 sides of
each leg footing then
paint them an “Aged
Concrete” color
![Page 56: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/56.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
For the final step of part 1
For the next step, cut out and secure the Floor Joist Template to your work surface
If your desired tank is not the same diameter as the template, redraw the diameter onto the template before cutting joists
![Page 57: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/57.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
For the final step of part 1
Use the Tank diameter circle as a guide and cut to 2 of each length of the floor joists out of 4x12 material
Then tack or double side tape them on the template
Note how the center two joists extend past the diameter, these help support the water spout
![Page 58: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/58.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
For the final step of part 1
Now spread some glue on the top side of the cap timbers, turn your assembly upside down and pace it on top of the joists aligning with the template marks for the Cap Timbers
Put a weight on it and let it dry completely
![Page 59: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/59.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Congratulations, you’ve made it through part 1 of scratch building a Water Tower!
Your project should now look something like this
![Page 60: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/60.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Next month, we’ll build the tank itselfThere are TWO ways to do this…
Build a Core out of Cardboard and wood or out of styrene
Use a Tube(Cardboard for wood)
(PVC for styrene)
![Page 61: Scratch Build a Water Tower. Before we really get started there’s a couple of things to consider Build in wood or styrene?](https://reader038.vdocument.in/reader038/viewer/2022110211/56649ecf5503460f94bdd611/html5/thumbnails/61.jpg)
Scratch Build a Water Scratch Build a Water TowerTower
Questions?