screening system attach clips to frame “snap” channel over clips … · 2019-04-04 · attach...
TRANSCRIPT
One Better Way | Georgetown, SC 29440 | 800.768.7325 ScreenTight.com
Aluminum Framing andScreening System
Attach Clips to Porch Frame
Snap Channels Over Clips
EASY Installation
Create Posts by Mating Channels
Roll in Screen
1 2
3 4
Versatile Aluminum Framing System!
EASY Installation Steps:1.
2.
3.
4.
5.
Attach CLIPS to Porch Frame Mark clip positions around the frame keeping clips aligned for properchannel installation. Attach clips a maximum of 4” from corners and14” - 16” apart using #10 x 1 1/2” stainless steel screws. Do notovertighten. (Do not exceed a maximum of 80 square feet perscreened in area.)
Attach FASTtrack™ CHANNEL to CLIPS Cut FASTtrack channels to length and snap over clips using a rubbermallet, installing the vertical channels first followed by the horizontalchannels.(NOTE: Install vertical post before installing the horizontals - Refer toStep 3 first)
Creating POSTS by “Mating”FASTtrack™ CHANNELSOne of the unique features of FASTtrack channels is that the 1”x2”channels snap together to form a 2”x2” post or rail.
Install vertical posts by attaching two clips stacked together in thedesired location on both the top and bottom of the frame using#10 x 2” stainless steel screws and then snapping the twoFASTtrack channels to the clip using a rubber mallet.
Install horizontal posts in a manner similar to step 3 using 3” lengthscrews to attach to the porch frame and #8 x 4 1/2” with nylon nut,zinc plated screws to attach the rails to the vertical posts.
Roll SCREEN into FASTtrack™ CHANNELUsing the flat spline, Pro Rollerknife™ Screening Tool & fiberglassscreen; Simply roll screen into the groves located on either theinterior or exterior of the porch. Starting with the top, workingyour way to the sides and bottom of each section to be screened.
Attach Clips to Frame “Snap” Channel over Clips
Mating Channels = POSTS Roll in Spline & Screen
Screen Tight® • One Better Way • Georgetown, SC 29440 • 800-768-7325
2.
3.
5.
Top FASTtrack Channel
Bottom FASTtrack Channel
A. 2.
Detail of Steps 1 - 2
Detail of ALL Steps TogetherDetail of ALL Steps Together
1.
Steps 1 & 2
Steps 3 & 4
Clip
Porch Frame
FASTtrackChannel
1.
Clip
PorchFrame
ROLLER
KNIFE
1. 5.Tools & OtherMaterials Needed:
Chop SawPro Rollerknife™Flat SplineScrew Driver/DrillRubber MalletFastenersFiberglass Screen
For more information please visit us on ourwebsite www.screentight.com. Thank you.
Step 1
4.
Need More Information?
Contact us at ScreenTight.com, [email protected] or
1-800-768-7325
Attach Fast Track Clips to Porch Frame
Mark clip positions around the frame keeping clips aligned for proper channel installation. Attach clips a maximum of 4” from corners and 14” - 16” apart using #10 x 1 1/2” screws.
Create Posts & Rails by Mating Channels
For vertical posts, simply stack two clips together in the desired location on both the top and bottom of the frame using #10 x 2” stainless steel screws and then snapping two channels together using a rubber mallet.
Install horizontal posts by using 3” length screws to attach clips to the porch frame and #8 x 4 1/2” screws to attach the rails to the vertical posts.
Attach Fast Track Channel to Clips
Cut Fast Track channels to length and snap over clips using a rubber mallet, install-ing the vertical channels first followed by the horizontalchannels.
Roll Screen
Using flat spline, a RollerknifeScreening Tool & fiberglass screen, simply roll screen into the grooves located on either the interior or exterior of the porch. Starting with the top, working your way to the sides and bottom of each section to be screened.
FAST TRACK SCREENING SYSTEMI N S TA L L AT I O N I N S T RU C T I O N S
Aluminum Framing andScreening System
Attach Clips to Porch Frame
Snap Channels Over Clips
EASY Installation
Create Posts by Mating Channels
Roll in Screen
1 2
3 4
Versatile Aluminum Framing System!
EASY Installation Steps:1.
2.
3.
4.
5.
Attach CLIPS to Porch Frame Mark clip positions around the frame keeping clips aligned for properchannel installation. Attach clips a maximum of 4” from corners and14” - 16” apart using #10 x 1 1/2” stainless steel screws. Do notovertighten. (Do not exceed a maximum of 80 square feet perscreened in area.)
Attach FASTtrack™ CHANNEL to CLIPS Cut FASTtrack channels to length and snap over clips using a rubbermallet, installing the vertical channels first followed by the horizontalchannels.(NOTE: Install vertical post before installing the horizontals - Refer toStep 3 first)
Creating POSTS by “Mating”FASTtrack™ CHANNELSOne of the unique features of FASTtrack channels is that the 1”x2”channels snap together to form a 2”x2” post or rail.
Install vertical posts by attaching two clips stacked together in thedesired location on both the top and bottom of the frame using#10 x 2” stainless steel screws and then snapping the twoFASTtrack channels to the clip using a rubber mallet.
Install horizontal posts in a manner similar to step 3 using 3” lengthscrews to attach to the porch frame and #8 x 4 1/2” with nylon nut,zinc plated screws to attach the rails to the vertical posts.
Roll SCREEN into FASTtrack™ CHANNELUsing the flat spline, Pro Rollerknife™ Screening Tool & fiberglassscreen; Simply roll screen into the groves located on either theinterior or exterior of the porch. Starting with the top, workingyour way to the sides and bottom of each section to be screened.
Attach Clips to Frame “Snap” Channel over Clips
Mating Channels = POSTS Roll in Spline & Screen
Screen Tight® • One Better Way • Georgetown, SC 29440 • 800-768-7325
2.
3.
5.
Top FASTtrack Channel
Bottom FASTtrack Channel
A. 2.
Detail of Steps 1 - 2
Detail of ALL Steps TogetherDetail of ALL Steps Together
1.
Steps 1 & 2
Steps 3 & 4
Clip
Porch Frame
FASTtrackChannel
1.
Clip
PorchFrame
ROLLER
KNIFE
1. 5.Tools & OtherMaterials Needed:
Chop SawPro Rollerknife™Flat SplineScrew Driver/DrillRubber MalletFastenersFiberglass Screen
For more information please visit us on ourwebsite www.screentight.com. Thank you.
Step 1
4.
Need More Information?
Contact us at ScreenTight.com, [email protected] or
1-800-768-7325
One of the unique features of Fast Track is that the 1”x2” channels snap together to
form a 2”x2” post and rails.
Screen Flat Spline Rollerknife Chop Saw Drill Rubber Mallet
Access project support and resources at ScreenTight.com
Tip: It’s recommended that at least six clips are used for each 8 foot length attached to porch frame.
TO O L S & S U P P L I E S
ME
SH
G
UA R D + S C R E E N
TI G
HT
NO
MORE PICKETS!F
RE
E Y
OU
R P O RC H • S C R E E N
TIG
HT
.CO
M
NO M
ORE PICKETS!
1
3
2
4